OpenE2K
/
qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
qemu-e2k/include/hw
History
Corey Minyard 52cc6a492b i2c:pm_smbus: Fix pm_smbus handling of I2C block read 
The I2C block read function of pm_smbus was completely broken.  It
required doing some direct I2C handling because it didn't have a
defined size, the OS code just reads bytes until it marks the
transaction finished.

This also required adjusting how the AMIBIOS workaround code worked,
the I2C block mode was setting STS_HOST_BUSY during a transaction,
so that bit could no longer be used to inform the host status read
code to start the transaction.  Create a explicit bool for that
operation.

Also, don't read the next byte from the device in byte-by-byte
mode unless the OS is actually clearing the byte done bit.  Just
assuming that's what the OS is doing is a bad idea.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
 		2019-02-27 21:06:08 -06:00
..
acpi typo: apci->acpi 2019-01-30 10:16:58 +01:00
adc
…
arm hw/arm/armsse: Make 0x5... alias region work for per-CPU devices 2019-02-21 18:17:48 +00:00
audio audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string 2018-10-29 13:50:15 +01:00
block block: Remove deprecated -drive option serial 2018-08-15 12:50:39 +02:00
char hw/char/pl011: Support all interrupt lines 2019-02-21 18:17:46 +00:00
core hw/core/split-irq: Device that splits IRQ lines 2018-03-02 11:03:45 +00:00
cpu qom/cpu: Add cluster_index to CPUState 2019-01-29 11:46:05 +00:00
cris
…
display hw/display/milkymist-tmu2: Move inlined code from header to source 2019-02-01 11:58:50 +01:00
dma hw/dma/pl080: Don't use CPU address space for DMA accesses 2018-08-20 11:24:33 +01:00
firmware hw/smbios: Move to the hw/firmware/ subdirectory 2018-12-19 16:48:16 -05:00
gpio hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral 2019-01-07 15:23:47 +00:00
hyperv hyperv: process POST_MESSAGE hypercall 2018-10-19 13:44:14 +02:00
i2c i2c:pm_smbus: Fix pm_smbus handling of I2C block read 2019-02-27 21:06:08 -06:00
i386 hw/i386/pc: enable PVH only for machine type >= 4.0 2019-02-05 16:50:17 +01:00
ide hw/ide: drop iov field from IDEDMA 2019-02-22 09:42:13 +00:00
input hw/input/ps2: Remove PS2State from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
intc qom: make interface types abstract 2018-12-11 15:45:22 -02:00
ipack
…
ipmi qom: make interface types abstract 2018-12-11 15:45:22 -02:00
isa qom: make interface types abstract 2018-12-11 15:45:22 -02:00
kvm
…
lm32
…
m68k
…
mem qom: make interface types abstract 2018-12-11 15:45:22 -02:00
mips hw/mips: Use the IEC binary prefix definitions 2018-07-02 15:41:16 +02:00
misc hw/misc/tz-ppc: Support having unused ports in the middle of the range 2019-02-21 18:17:46 +00:00
net net: cadence_gem: Add support for selecting the DMA MemoryRegion 2018-10-16 17:13:49 +01:00
nvram hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories 2019-02-01 15:31:26 +00:00
pci pci/msi: export msi_is_masked() 2019-02-05 10:58:33 -05:00
pci-bridge Clean up includes 2018-02-09 05:05:11 +01:00
pci-host spapr: Rename xics to intc in interrupt controller agnostic code 2019-02-17 21:54:02 +11:00
ppc xics: Drop the KVM ICS class 2019-02-18 10:52:08 +11:00
riscv sifive_uart: Implement interrupt pending register 2018-12-20 12:08:43 -08:00
s390x target/s390x: Split out s390-tod.h 2019-02-18 11:25:43 +01:00
scsi scsi: esp: Defer command completion until previous interrupts have been handled 2019-01-11 13:57:24 +01:00
sd sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR) 2018-06-08 13:15:34 +01:00
sh4 avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
sparc sun4u_iommu: update to reflect IOMMU is no longer part of the APB device 2018-01-09 21:48:20 +00:00
ssi aspeed/smc: snoop SPI transfers to fake dummy cycles 2019-01-29 11:46:05 +00:00
timer hw/timer/pl031: Allow use as an embedded-struct device 2019-02-21 18:17:46 +00:00
tricore
…
unicore32
…
usb usb: Add basic code to emulate Chipidea USB IP 2018-02-09 10:40:30 +00:00
vfio qemu/queue.h: typedef QTAILQ heads 2019-01-11 15:46:55 +01:00
virtio Pull request 2019-02-25 17:28:04 +00:00
watchdog hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module 2018-08-20 11:24:33 +01:00
xen pvh: Add x86/HVM direct boot ABI header file 2019-02-05 16:50:16 +01:00
xtensa target/xtensa: add MX interrupt controller 2019-01-28 11:55:20 -08:00
boards.h boards.h: Ignore migration for SMBus devices on older machines 2019-02-27 21:06:08 -06:00
bt.h
…
devices.h ui/console: Remove MouseTransformInfo from qemu/typedefs.h 2019-01-22 05:14:33 +01:00
elf_ops.h elf-ops.h: Add get_elf_note_type() 2019-02-05 16:50:16 +01:00
empty_slot.h
…
fw-path-provider.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hotplug.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hw.h
…
ide.h ide/via: Rename functions to match device name 2019-01-25 14:52:12 -05:00
irq.h hw/core/split-irq: Device that splits IRQ lines 2018-03-02 11:03:45 +00:00
loader-fit.h Use #include "..." for our own headers, <...> for others 2018-02-09 05:05:11 +01:00
loader.h elf: Add optional function ptr to load_elf() to parse ELF notes 2019-02-05 16:50:16 +01:00
nmi.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
or-irq.h hw/core/or-irq: Support more than 16 inputs to an OR gate 2018-06-15 15:23:34 +01:00
pcmcia.h hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
platform-bus.h platform-bus-device: use device plug callback instead of machine_done notifier 2018-05-10 18:10:56 +01:00
ptimer.h ptimer: Add TRIGGER_ONLY_ON_DECREMENT policy option 2018-07-09 14:51:34 +01:00
qdev-core.h qdev: pass an Object * to qbus_set_hotplug_handler() 2019-02-17 21:54:02 +11:00
qdev-dma.h
…
qdev-properties.h qapi: Define PCIe link speed and width properties 2018-12-19 16:48:16 -05:00
qdev.h
…
register.h hw: register: Run post_write hook on reset 2018-03-01 11:05:43 +00:00
registerfields.h Use #include "..." for our own headers, <...> for others 2018-02-09 05:05:11 +01:00
stream.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
sysbus.h core/sysbus: remove the SysBusDeviceClass::init path 2018-12-13 13:48:03 +00:00
usb.h qemu/queue.h: simplify reverse access to QTAILQ 2019-01-11 15:46:55 +01:00