qemu-e2k/hw/arm
Peter Maydell 5614ca800e hw/arm/boot: Support DTB autoload for firmware-only boots
The arm_boot_info struct has a skip_dtb_autoload flag: if this is
set to true by the board code then arm_load_kernel() will not
load the DTB itself, but will leave this for the board code to
do itself later. However, the check for this is done in a
code path which is only executed for the case where we load
a kernel image file. If we're taking the "boot via firmware"
code path then the flag isn't honoured and the DTB is never
loaded.

We didn't notice this because the only real user of "boot
via firmware" that cares about the DTB is the virt board
(for UEFI boot), and that always wants skip_dtb_autoload
anyway. But the SBSA reference board model we're planning to
add will want the flag to behave correctly.

Now we've refactored the arm_load_kernel() function, the
fix is simple: drop the early 'return' so we fall into
the same "load the DTB" code the boot-direct-kernel path uses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190131112240.8395-6-peter.maydell@linaro.org
2019-02-05 16:52:42 +00:00
..
Makefile.objs hw/arm/iotkit: Rename files to hw/arm/armsse.[ch] 2019-02-01 14:55:42 +00:00
allwinner-a10.c hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller 2019-01-07 15:23:47 +00:00
armsse.c hw/arm/armsse: Add SSE-200 model 2019-02-01 14:55:43 +00:00
armv7m.c armv7m: Pass through start-powered-off CPU property 2019-02-01 14:55:41 +00:00
aspeed.c hw/arm/aspeed: Fix build issue with clang 3.4 2018-11-28 13:51:41 +00:00
aspeed_soc.c aspeed: add a max_ram_size property to the memory controller 2018-08-16 14:29:58 +01:00
bcm2835_peripherals.c Change references to serial_hds[] to serial_hd() 2018-04-26 13:57:00 +01:00
bcm2836.c hw/arm/bcm2836: Fix crash with device_add bcm2837 on unsupported machines 2018-07-17 13:12:49 +01:00
boot.c hw/arm/boot: Support DTB autoload for firmware-only boots 2019-02-05 16:52:42 +00:00
collie.c hw: Do not include "sysemu/block-backend.h" if it is not necessary 2018-06-01 14:15:10 +02:00
cubieboard.c
digic.c Change references to serial_hds[] to serial_hd() 2018-04-26 13:57:00 +01:00
digic_boards.c
exynos4_boards.c
exynos4210.c hw/arm/exynos4210: Zero memory allocated for Exynos4210State 2018-11-06 11:32:14 +00:00
fsl-imx6.c hw/arm/fsl-imx6: Fix introspection problems with the "fsl, imx6" device 2018-07-17 13:12:49 +01:00
fsl-imx6ul.c hw/arm/fsl-imx6ul: Connect VIRQ and VFIQ 2018-08-24 13:17:33 +01:00
fsl-imx7.c hw/arm/fsl-imx6ul: Connect VIRQ and VFIQ 2018-08-24 13:17:34 +01:00
fsl-imx25.c hw/arm/fsl-imx25: Fix introspection problem with the "fsl, imx25" device 2018-07-17 13:12:49 +01:00
fsl-imx31.c hw/arm/fsl-imx31: Fix introspection problem with the "fsl, imx31" device 2018-07-17 13:12:49 +01:00
gumstix.c hw: Do not include "sysemu/block-backend.h" if it is not necessary 2018-06-01 14:15:10 +02:00
highbank.c hw/arm/highbank: Connect VIRQ and VFIQ 2018-08-24 13:17:33 +01:00
imx25_pdk.c
integratorcp.c Change references to serial_hds[] to serial_hd() 2018-04-26 13:57:00 +01:00
kzm.c Change references to serial_hds[] to serial_hd() 2018-04-26 13:57:00 +01:00
mainstone.c hw: Do not include "sysemu/block-backend.h" if it is not necessary 2018-06-01 14:15:10 +02:00
mcimx6ul-evk.c i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK Board 2018-08-16 14:05:28 +01:00
mcimx7d-sabre.c i.mx7d: Remove unused header files 2018-06-29 15:11:16 +01:00
microbit.c arm: Stub out NRF51 TWI magnetometer/accelerometer detection 2019-01-29 11:46:03 +00:00
mps2-tz.c hw/arm/mps2-tz: Add mps2-an521 model 2019-02-01 14:55:44 +00:00
mps2.c hw/arm/mps2: Fix ID register errors on AN511 and AN385 2018-08-24 13:17:50 +01:00
msf2-soc.c hw/arm: make bitbanded IO optional on ARMv7-M 2018-08-16 14:05:28 +01:00
msf2-som.c hw: Directly use "qemu/units.h" instead of "qemu/cutils.h" 2018-07-02 15:41:12 +02:00
musicpal.c musicpal: Convert sysbus init function to realize function 2018-12-13 13:47:56 +00:00
netduino2.c
nrf51_soc.c arm: Instantiate NRF51 special NVM's and NVMC 2019-02-01 15:32:17 +00:00
nseries.c hw: Do not include "sysemu/block-backend.h" if it is not necessary 2018-06-01 14:15:10 +02:00
omap1.c hw/arm/omap1: Use qemu_log_mask(GUEST_ERROR) instead of fprintf 2018-06-26 17:50:40 +01:00
omap2.c hw: Do not include "sysemu/blockdev.h" if it is not necessary 2018-06-01 14:15:10 +02:00
omap_sx1.c hw: Do not include "sysemu/block-backend.h" if it is not necessary 2018-06-01 14:15:10 +02:00
palm.c
pxa2xx.c fix "Missing break in switch" coverity reports 2018-08-23 13:32:50 +02:00
pxa2xx_gpio.c
pxa2xx_pic.c
raspi.c
realview.c scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline() 2018-09-25 11:12:25 +10:00
sabrelite.c
smmu-common.c hw/arm/smmu-common: Fix the name of the iommu memory regions 2018-09-25 14:14:07 +01:00
smmu-internal.h hw/arm/smmu-common: VMSAv8-64 page table walk 2018-05-04 18:05:51 +01:00
smmuv3-internal.h hw/arm/smmuv3: fix eventq recording and IRQ triggerring 2018-09-25 15:13:24 +01:00
smmuv3.c hw/arm/smmuv3: fix eventq recording and IRQ triggerring 2018-09-25 15:13:24 +01:00
spitz.c hw/arm/spitz: Move problematic nand_init() code to realize function 2018-07-23 15:21:26 +01:00
stellaris.c avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
stm32f205_soc.c hw/arm: make bitbanded IO optional on ARMv7-M 2018-08-16 14:05:28 +01:00
strongarm.c strongarm: mask off high[31:28] bits from dir and state registers 2018-11-02 14:03:33 +00:00
strongarm.h
sysbus-fdt.c hw/arm/sysbus-fdt: Only call match_fn callback if the type matches 2018-11-13 10:47:58 +00:00
tosa.c
trace-events hw/arm/smmuv3: Add notifications on invalidation 2018-06-26 17:50:42 +01:00
versatilepb.c scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline() 2018-09-25 11:12:25 +10:00
vexpress.c hw/arm/vexpress: Add "virtualization" property controlling presence of EL2 2018-08-24 13:17:35 +01:00
virt-acpi-build.c hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node 2019-01-21 10:23:11 +00:00
virt.c include: remove compat.h 2019-01-07 16:18:42 +04:00
xilinx_zynq.c hw/arm/xilinx_zynq: Use the ARRAY_SIZE macro 2018-11-02 14:03:33 +00:00
xlnx-versal-virt.c hw/arm: versal: Plug memory leaks 2019-01-07 15:23:46 +00:00
xlnx-versal.c hw/arm: versal: Add a model of Xilinx Versal SoC 2018-11-02 14:10:53 +00:00
xlnx-zcu102.c xlnx-zynqmp: Swap Cortex-R5 for Cortex-R5F 2018-06-22 13:28:38 +01:00
xlnx-zynqmp.c hw/arm/xlnx-zynqmp: Realize cluster after putting RPUs in it 2019-01-29 11:46:05 +00:00
z2.c hw: Do not include "sysemu/block-backend.h" if it is not necessary 2018-06-01 14:15:10 +02:00