2020-02-19 Nelson Chu <nelson.chu@sifive.com>
gas/
* testsuite/gas/riscv/c-add-addi.d: New testcase.
* testsuite/gas/riscv/c-add-addi.s: Likewise.
opcodes/
* riscv-opc.c (riscv_opcodes): Convert add/addi to the compressed
c.mv/c.li if rs1 is zero.
Change-Id: Id939b5e6db80d267a832545f3ffef7b9ba881f7d
* config/tc-i386.c (output_insn): Mark cvtpi2ps and cvtpi2pd
with GNU_PROPERTY_X86_FEATURE_2_MMX.
* testsuite/gas/i386/i386.exp: Run property-3 and
x86-64-property-3.
* testsuite/gas/i386/property-3.d: New file.
* testsuite/gas/i386/property-3.s: Likewise.
* testsuite/gas/i386/x86-64-property-3.d: Likewise.
Generally, the documentation doesn't allow for any explicit operands
to be specified with MONITOR/MWAIT. To permit the more legible
overriding of the address size via specifying operands, the option is
being retained even in Intel mode, but operand swapping is being
suppressed by this patch. This is both because it makes no sense here
(all of the operands are inputs) and because, as a result, old gcc
(prior to 4.8) actually expects it this way with -mintel-syntax (and
hence gets fixed by this change rather than, as claimed by a reply in
the bug report, broken).
Conversions which shrink element size and which have a memory source
can't be disambiguated between their 128- and 256-bit variants by
looking at the register operand. "operand size mismatch", however, is a
pretty misleading diagnostic. Generalize the logic introduced for
VFPCLASSP{S,D} such that, with suitable similar adjustments to the
respective templates, it'll cover these cases too.
For VCVTNEPS2BF16 also fold the two previously separate AVX512VL
templates to achieve the intended effect. This is then also accompanied
by a respective addition to the inval-avx512f testcase.
For these to get treatment consistent with other operand size checking
the special logic shouldn't live in md_assemble(), but process_suffix().
And there's more logic involved than simply zapping the suffix.
Note however that MOVS[BW]* and MOVZ[BW]* still won't be fully
consistent, due to the objection to fold MOVS* templates just like was
done for MOVZ* in c07315e0c6 ("x86: allow suffix-less movzw and 64-bit
movzb").
Note further that it is against my own intentions to have MOVSX/MOVZX
silently default to a byte source in AT&T mode. This should happen only
when the destination register is a 16-bit one. In all other cases there
is an ambiguity, and the user should be warned. But it was explicitly
requested for this to be done in a way inconsistent with everything
else.
Note finally that the assembler change points out (and this patch fixes)
a wrong Intel syntax test introduced by bc31405ebb ("x86-64: Properly
encode and decode movsxd"): When source code specifies a 16-bit
destination register, disassembly expectations shouldn't have been to
find a 32-bit one.
Since we already suppress the prefix altogether when it's the default
one for the chosen addressing mode, let's do so also when instruction
prefix and override specified with the memory operand match. (Note that
insn prefix specified segment overrides never get discarded.)
For one both possible forms should be warned about. And then, to guard
against future surprises, qualify the original opcode check by excluding
VEX/EVEX-like templates.
Since PLT entry isn't needed for branch to local symbol, we can resolve
R_386_PLT32/R_X86_64_PLT32 relocation aganst local symbol to section,
similar to R_386_PC32/R_X86_64_PC32.
2020-02-13 Fangrui Song <maskray@google.com>
H.J. Lu <hongjiu.lu@intel.com>
PR gas/25551
* config/tc-i386.c (tc_i386_fix_adjustable): Don't check
BFD_RELOC_386_PLT32 nor BFD_RELOC_X86_64_PLT32.
* testsuite/gas/i386/i386.exp: Run relax-5 and x86-64-relax-4.
* testsuite/gas/i386/relax-5.d: New file.
* testsuite/gas/i386/relax-5.s: Likewise.
* testsuite/gas/i386/x86-64-relax-4.d: Likewise.
* testsuite/gas/i386/x86-64-relax-4.s: Likewise.
With AVX512VL disabled (e.g. when writing code for the Knights family
of processors) these insns aren't ambiguous when used with a memory
source, and hence should be accepted without suffix or operand size
specifier. When AVX512VL is enabled, to be consistent with this as
well as other ambiguous operand size handling it would seem better to
just warn about the ambiguity in AT&T mode, and still default to 512-bit
operands (on the assumption that the code may have been written without
AVX512VL in mind yet), but it was requested to leave AT&T syntax mode
alone here.
AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)
Along the lines of be4c5e58bd ("x86: Always disallow double word suffix
with word general register") also adjust check_{byte,word}_reg(), to make
overall behavior consistent again in this regard.
Here we implement the custom datapath extensions for MVE.
This required the following changes:
- Adding a new register argument type (that takes either an MVE vector or
a Neon S or D register).
- Adding two new immediate operands types (0-127 and 0-4095).
- Using the Neon type machinery to distinguish between instruction
types. This required the introduction of new neon shapes to account
for the coprocessor operands to these instructions.
- Adding a new disassembly character to `print_insn_cde` to handle the
new register types.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
instructions that can have 5 arguments.
(enum operand_parse_code): Add new operands.
(parse_operands): Account for new operands.
(S5): New macro.
(enum neon_shape_el): Introduce P suffixes for coprocessor.
(neon_select_shape): Account for P suffix.
(LOW1): Move macro to global position.
(HI4): Move macro to global position.
(vcx_assign_vec_d): New.
(vcx_assign_vec_m): New.
(vcx_assign_vec_n): New.
(enum vcx_reg_type): New.
(vcx_get_reg_type): New.
(vcx_size_pos): New.
(vcx_vec_pos): New.
(vcx_handle_shape): New.
(vcx_ensure_register_in_range): New.
(vcx_handle_register_arguments): New.
(vcx_handle_insn_block): New.
(vcx_handle_common_checks): New.
(do_vcx1): New.
(do_vcx2): New.
(do_vcx3): New.
* testsuite/gas/arm/cde-missing-fp.d: New test.
* testsuite/gas/arm/cde-missing-fp.l: New test.
* testsuite/gas/arm/cde-missing-mve.d: New test.
* testsuite/gas/arm/cde-missing-mve.l: New test.
* testsuite/gas/arm/cde-mve-or-neon.d: New test.
* testsuite/gas/arm/cde-mve-or-neon.s: New test.
* testsuite/gas/arm/cde-mve.s: New test.
* testsuite/gas/arm/cde-warnings.l:
* testsuite/gas/arm/cde-warnings.s:
* testsuite/gas/arm/cde.d:
* testsuite/gas/arm/cde.s:
opcodes/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (print_insn_cde): Define 'V' parse character.
(cde_opcodes): Add VCX* instructions.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
Commit d835a58baa disabled sysenter/sysenter in 64-bit mode by
default. By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.
gas/
PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.
opcodes/
PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64. Update sysenter/sysenter with
Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.
* config/obj-elf.c (obj_elf_change_section): Error for section
type, attr or entsize changes in assembly.
* testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
* testsuite/gas/elf/section5.l: Update.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
As shown in
https://sourceware.org/bugzilla/show_bug.cgi?id=25490
--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result. This patch adds the section flag 'o' to
.section directive:
.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1
which specifies the symbol name which the section references. Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.
Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.
bfd/
PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.
gas/
PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This. Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.
ld/
PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique
only for ELF targets.
* testsuite/gas/i386/unique.d: Don't xfail.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
With the addition of section16 tests we have multiple tests
advertising themselves as "mbind sections" and "mbind section
contents". This patch fixes that, and fails on quite a few targets
that force an OSABI value. It's a pain specifying all the relevant
arm targets on an xfail line, so I wrote supports_gnu_osabi.
binutils/
* testsuite/lib/binutils-common.exp (match_target): Accept '!' before
TCL procedure.
(supports_gnu_osabi): New procedure.
(is_generic): New, from ld-lib.exp.
(supports_gnu_unique): Use the above.
gas/
* testsuite/gas/elf/section12a.d: Use supports_gnu_osabi in
xfail, and rename test.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
ld/
* testsuite/lib/ld-lib.exp (is_generic): Delete.
* testsuite/ld-unique/unique.exp: Exclude tic6x.
Clang's integrated assembler supports multiple section with the same
name:
.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop
"unique,N" assigns the number, N, as the section ID, to a section. The
valid values of the section ID are between 0 and 4294967295. It can be
used to distinguish different sections with the same section name.
This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.
This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id. It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.
bfd/
PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.
binutils/
PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.
gas/
PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p. Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N". Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
ld/
PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
We noticed +mve was not enabling DSP instructions as it should, reported in PR
25472.
The MVE architecture extension for Armv8.1-M Mainline implies DSP extensions.
This patch reflects that in the '+mve' command line option.
gas/ChangeLog:
2020-01-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR gas/25472
* config/tc-arm.c (armv8m_main_ext_table): Refactored +dsp adding.
(armv8_1m_main_ext_table): Refactored +dsp adding and enabled dsp for
+mve.
* testsuite/gas/arm/mve_dsp.d: New test.
This patch adds support for assembly instructions vldmia, vldmdb, vstmia
and vstmdb in MVE. This instructions are already supported for Armv8-M
Floating-point Extension.
gas/ChangeLog:
2020-01-31 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (fldmias): Moved inside "THUMB_VARIANT & arm_ext_v6t2"
to support VLDMIA instruction for MVE.
(fldmdbs): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VLDMDB
instruction for MVE.
(fstmias): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VSTMIA
instruction for MVE.
(fstmdbs): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VSTMDB
instruction for MVE.
* testsuite/gas/arm/mve-ldst.d: New test.
* testsuite/gas/arm/mve-ldst.s: Likewise.
bfcvt converts a .S input to a .H output, so any predicated movprfx
needs to operate on .S rather than .H. In common with SVE2 narrowing
top operations, bfcvtnt doesn't accept movprfx.
2020-01-31 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_MAX_ELEM for SVE bfcvt.
Remove C_SCAN_MOVPRFX for SVE bfcvtnt.
gas/
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: Use .h rather than
.s for the movprfx.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_28.d,
* testsuite/gas/aarch64/sve-movprfx_28.l,
* testsuite/gas/aarch64/sve-movprfx_28.s: New test.
Comparison of i.tm.base_opcode against particular but not sufficiently
specific values needs to be accompanied by other qualification. Exclude
VEX and alike encodings here, and also exclude all forms of prefixes
explicitly specified in the opcodes table. While using @GOT with such
insns may not be very useful, it also isn't with e.g. ADC and SBB, yet
these get explicitly listed in comments as supported.
This patch fixes the neg/neg32 BPF instructions, which have K (=0)
instead of X (=1) in their header source bit, despite operating on
registes.
cpu/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-alu-insn-un): The unary BPF instructions
(neg and neg32) use OP_SRC_K even if they operate only in
registers.
opcodes/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c: Regenerate.
gas/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Update expected opcode for `neg'.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise for `neg32'.
* testsuite/gas/bpf/alu32-be.d: Likewise.
While vendors agree about default operand size (64 bits) and hence
unavilability of a 32-bit form, AMD honors a 16-bit operand size
override (0x66) while Intel doesn't.
Other than near returns these default to 32-bit operand size, and hence
it isn't really unlikely that 64-bit forms are meant. Hence these should
have disambiguating suffixes. In Intel mode, however, don't error in
these cases unconditionally - MASM accepts these without suffix _and_
without warning.
movsxd is a 64-bit only instruction. It supports both 16-bit and 32-bit
destination registers. Its AT&T mnemonic is movslq which only supports
64-bit destination register. There is also a discrepancy between AMD64
and Intel64 on movsxd with 16-bit destination register. AMD64 supports
32-bit source operand and Intel64 supports 16-bit source operand.
This patch updates movsxd encoding and decoding to alow 16-bit and 32-bit
destination registers. It also handles movsxd with 16-bit destination
register for AMD64 and Intel 64.
gas/
PR binutils/25445
* config/tc-i386.c (check_long_reg): Also convert to QWORD for
movsxd.
* doc/c-i386.texi: Add a node for AMD64 vs. Intel64 ISA
differences. Document movslq and movsxd.
* testsuite/gas/i386/i386.exp: Run PR binutils/25445 tests.
* testsuite/gas/i386/x86-64-movsxd-intel.d: New file.
* testsuite/gas/i386/x86-64-movsxd-intel64-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd.s: Likewise.
opcodes/
PR binutils/25445
* i386-dis.c (MOVSXD_Fixup): New function.
(movsxd_mode): New enum.
(x86_64_table): Use MOVSXD_Fixup and movsxd_mode on movsxd.
(intel_operand_size): Handle movsxd_mode.
(OP_E_register): Likewise.
(OP_G): Likewise.
* i386-opc.tbl: Remove Rex64 and allow 32-bit destination
register on movsxd. Add movsxd with 16-bit destination register
for AMD64 and Intel64 ISAs.
* i386-tbl.h: Regenerated.
This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction
overlaps with the possible encoding space for msr. This because msr allows you
to use unallocated encoding space using the general sA_B_cC_cD_E form.
However when an encoding does become allocated then we need to ensure that it's
used as the preferred disassembly. The problem with cfinv is that its mask has
all bits sets because it has no arguments.
This causes issues for the Alias resolver in gas as it uses the mask to build
alias graph. In this case it can't do it since it thinks almost everything
would alias with cfinv. So instead we can only fix this by moving cfinv before
msr.
gas/ChangeLog:
PR 25403
* testsuite/gas/aarch64/armv8_4-a.d: Add cfinv.
* testsuite/gas/aarch64/armv8_4-a.s: Likewise.
opcodes/ChangeLog:
PR 25403
* aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv.
* aarch64-asm-2.c: Regenerate
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
bfd/
2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
* bfd/elfnn-riscv.c (riscv_skip_prefix): New.
(riscv_prefix_cmp): Likewise.
(riscv_non_std_ext_p): Deleted.
(riscv_std_sv_ext_p): Likewise.
(riscv_non_std_sv_ext_p): Likewise.
(riscv_merge_non_std_and_sv_ext): Rename to...
(riscv_merge_multi_letter_ext): and modified to use riscv_prefix_cmp.
(riscv_merge_arch_attr_info): Replace 3 calls to
riscv_merge_non_std_and_sv_ext with single call to
riscv_merge_multi_letter_ext.
* bfd/elfxx-riscv.c (riscv_parse_std_ext): Break if we
encounter a 'z' prefix.
(riscv_get_prefix_class): New function, return prefix class based
on first few characters of input string.
(riscv_parse_config): New structure to factor out minor differences
in extension class parsing behaviour.
(riscv_parse_sv_or_non_std_ext): Rename to...
(riscv_parse_prefixed_ext): and parameterise with
riscv_parse_config.
(riscv_std_z_ext_strtab, riscv_std_s_ext_strtab): New.
(riscv_multi_letter_ext_valid_p): New.
(riscv_ext_x_valid_p, riscv_ext_z_valid_p, riscv_ext_s_valid_p): New.
(riscv_parse_subset): Delegate all non-single-letter parsing work
to riscv_parse_prefixed_ext.
* bfd/elfxx-riscv.h (riscv_isa_ext_class): New type.
(riscv_get_prefix_class): Declare.
gas/
2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
* testsuite/gas/riscv/march-ok-s.d: sx is no longer valid and
s exts must be known, so rename *ok* to *fail*.
* testsuite/gas/riscv/march-ok-sx.d: Likewise.
* testsuite/gas/riscv/march-ok-s-with-version: Likewise.
* testsuite/gas/riscv/march-fail-s.l: Expected error messages for
above change.
* testsuite/gas/riscv/march-fail-sx.l: Likewise.
* testsuite/gas/riscv/march-fail-sx-with-version.l: Likewise.
Change-Id: Ic4d91a13d055a10d30ab28752a380a669b59f29c
In 64-bit mode, double word suffix in mnemonic with word general register
is disallowed. Otherwise, assembler gives a warning:
$ cat /tmp/x.s
movl %ax, %bx
movl %ds, %ax
movl %ax, %cs
$ gcc -c /tmp/x.s
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Warning: using `%ebx' instead of `%bx' due to `l' suffix
/tmp/x.s:1: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:2: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:3: Warning: using `%eax' instead of `%ax' due to `l' suffix
This patch makes it a hard error in all modes. Now we get:
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
PR gas/25438
* config/tc-i386.c (check_long_reg): Always disallow double word
suffix in mnemonic with word general register.
* testsuite/gas/i386/general.s: Replace word general register
with double word general register for movl.
* testsuite/gas/i386/inval.s: Add tests for movl with word general
register.
* testsuite/gas/i386/general.l: Updated.
* testsuite/gas/i386/inval.l: Likewise.
There's no need (anymore?) to heavily special case this - just make
generic logic consider only its first operand, and deal with the case
of an 'l' suffix not being allowed in a pattern.
Commit b76bc5d54e ("x86: don't default variable shift count insns to
8-bit operand size") pointed out a very bad case, but the underlying
problem is, as mentioned on various occasions, much larger: Silently
selecting a (nowhere documented afaict) certain default operand size
when there's no "sizing" suffix and no suitable register operand(s) is
simply dangerous (for the programmer to make mistakes).
While in Intel syntax mode such mistakes already lead to an error (which
is going to remain that way), AT&T syntax mode now gains warnings in
such cases by default, which can be suppressed or promoted to an error
if so desired by the programmer. Furthermore at least general purpose
insns now consistently have a default applied (alongside the warning
emission), rather than accepting some and refusing others.
No warnings are (as before) to be generated for "DefaultSize" insns as
well as ones acting on selector and other fixed-width values. For
SYSRET, however, the DefaultSize needs to be dropped - it had been
wrongly put there in the first place, as it's unrelated to .code16gcc
(no stack accesses involved).
As set forth as a prereq when I first mentioned this intended change a
few years back, Linux as well as gcc have meanwhile been patched to
avoid (emission of) ambiguous operands (and hence triggering of the new
warning).
Note that I think that in 64-bit mode IRET and far RET would better get
a diagnostic too, as it's reasonably likely that a suffix-less instance
really is meant to be a 64-bit one. But I guess I better make this a
separate follow-on patch.
Note further that floating point operations with integer operands are an
exception for now: They continue to use short (16-bit) operands by
default even in 32- and 64-bit modes.
Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also
need to be diagnosed, with their 64-bit forms not being very useful I
think it is better to continue to avoid warning about them (by way of
them carrying IgnoreSize attributes).
Just like other VCVT*{X,Y} templates do, and to allow the programmer
flexibility (might be relevant in particular when heavily macro-izing
code), the two templates should also have Broadcast set, just like their
X/Y-suffix-less counterparts. This in turn requires them to also have
* Dword set on their memory operands, to cover the logic added to
i386gen by 4a1b91eabb ("x86: Expand Broadcast to 3 bits"),
* RegXMM/RegYMM set on their source operands, to satisfy broadcast
sizing logic in gas itself.
Otherwise ATTSyntax templates wouldn't need such operand size attributes.
While extending the test cases, also add Intel syntax broadcast forms
without explicit size specifiers.
The AVX512DQ patterns lacking a Cpu64 attribute made the memory operand
forms accepted even outside of 64-bit mode, and this even without any
{evex} pseudo-prefix (otherwise one could argue that this is an attempt
to follow one possible, albeit somewhat odd, interpretation of the SDM
wording to this effect).
For consistency between the various involved templates drop the
* (now) unnecessary IgnoreSize attributes
* unnecessary (due to VexW1) Size64 attributes from VEX encoded forms
* redundant (with Reg64) Qword operand attributes
uniformly.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
PR 25377
gas * config/tc-z80.c: Add support for half precision, single
precision and double precision floating point values.
* config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes.
* doc/as.texi: Add new z80 command line options.
* doc/c-z80.texi: Document new z80 command line options.
* testsuite/gas/z80/ez80_pref_dis.s: New test.
* testsuite/gas/z80/ez80_pref_dis.d: New test driver.
* testsuite/gas/z80/z80.exp: Run the new test.
* testsuite/gas/z80/fp_math48.d: Use correct command line option.
* testsuite/gas/z80/fp_zeda32.d: Likewise.
* testsuite/gas/z80/strings.d: Update expected output.
opcodes * z80-dis.c (suffix): Use .db instruction to generate double
prefix.
The signed integer overflow occurred when adding one to target_count
for (i = 0; i < target_count + 1; i++)
but that's the least of the worries here. target_count was long and i
int, leading to the possibility of a loop that never ended.
So to avoid this type of vulnerability, this patch uses what I believe
to be the proper types for arguments of various wasm32 opcodes, rather
than using "long" which may change in size.
gas/
* testsuite/gas/wasm32/allinsn.d: Update expected output.
opcodes/
* wasm32-dis.c (print_insn_wasm32): Localise variables. Store
result of wasm_read_leb128 in a uint64_t and check that bits
are not lost when copying to other locals. Use uint32_t for
most locals. Use PRId64 when printing int64_t.
Jim Wilson
Sergey Belyashov
H.J. Lu
Jan Beulich
Matthew Malcomson
Alan Modra
Andre Vieira
Srinath Parvathaneni
Richard Sandiford
Jose E. Marchesi
Tamar Christina
Jozef Lawrynowicz
Lili Cui
Claudiu Zissulescu