The Cortex-A53 erratum currently has two ways it can resolve the erratum when
using the flag --fix-cortex-a53-843419:
1) If the address is within the range of an ADR instruction it rewrites the ADRP
into an ADR, and those doesn't need the use of a veneer.
2) If the address is not within range, it adds a branch to a veneer which will
execute the final bit of the erratum workaround and branch back to the call
site.
When we do this we always generate the veneers and we always align the size of
the text section to 4KB. This is because we only know which workaround we can
use after all linking has finished and all addresses are known. This means even
though the veneers are not used, we still generate the section and we still
change the size of the input section.
This is problematic for small memory devices as this would require the user to
take about a ~4KB hit in memory even though it's not even used.
Since there's no real way to restart the linking process from the final write
phase this patch solves the issue by allowing the user more control over which
erratum workaround gets used.
Concretely this changes the option --fix-cortex-a53-843419 to take optional
arguments --fix-cortex-a53-843419[=full|adr|adrp]
- full (default): Use both ADRP and ADR workaround. This is equivalent to not
specifying any options and is the default behavior before this
patch.
- adr: Only use the ADR workaround, this will not cause any increase in binary
size but linking will fail if the referenced address is out of range of
an ADR instruction.
- adrp: Use only the ADRP workaround, this will never rewrite your ADRP.
In the cases where the user knows how big their binaries are the `adr` option
would prevent the unneeded overhead.
bfd/ChangeLog:
PR ld/24373
* bfd-in.h (enum erratum_84319_opts): New
(bfd_elf64_aarch64_set_options, bfd_elf32_aarch64_set_options): Change
int to enum erratum_84319_opts.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (struct elf_aarch64_link_hash_table): Change
fix_erratum_843419 to use new enum, remove fix_erratum_843419_adr.
(_bfd_aarch64_add_stub_entry_after): Conditionally create erratum stub.
(aarch64_size_one_stub): Conditionally size erratum 843419 stubs.
(_bfd_aarch64_resize_stubs): Amend comment.
(elfNN_aarch64_size_stubs): Don't generate stubs when no workaround
requested.
(bfd_elfNN_aarch64_set_options): Use new fix_erratum_843419 enum.
(_bfd_aarch64_erratum_843419_branch_to_stub): Implement selection of
erratum workaround.
(clear_erratum_843419_entry): Update erratum conditional.
ld/ChangeLog:
PR ld/24373
* emultempl/aarch64elf.em (PARSE_AND_LIST_LONGOPTS): Add optional args
to flags.
* NEWS: Add changes to flag.
(PARSE_AND_LIST_OPTIONS): Update help descriptions.
(PARSE_AND_LIST_ARGS_CASES): Add new options to parser.
* testsuite/ld-aarch64/aarch64-elf.exp: Add new run_dump_tests.
* testsuite/ld-aarch64/erratum843419-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-adrp.d: New test.
* testsuite/ld-aarch64/erratum843419-far-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-far-full.d: New test.
* testsuite/ld-aarch64/erratum843419-far.s: New test.
* testsuite/ld-aarch64/erratum843419-full.d: New test.
* testsuite/ld-aarch64/erratum843419-near.s: New test.
* testsuite/ld-aarch64/erratum843419-no-args.d: New test.
The range check done to transform an absolute call/jump to a pc-relative one is
off-by-one, and that causes this shortening optimization to be missed if the
branch target is right at the range boundary.
In the non-shrinkable case, the range is what is mentioned in the ISA - -4094
bytes in the backward direction, and 4096 bytes in the positive direction.
In the shrinkable case, the forward jump range increases by two bytes (deleted
because of the shortening from call/jmp to rcall/rjmp), and therefore, the
range is -4094 in the reverse, and 4098 in the positive direction.
Fix the ranges for !shrinkable and shrinkable cases, and add a test caes to
ensure jumps to max forward and backward ranges get relaxed to rjmp.
The current code to compute relative distance in the wrap around case does not
handle the edge case of the target (after adjusting for implicit PC increment)
being exactly half of the wrap around distance. This patch fixes that and adds a
testcase.
The range for a forward relative jump call is 4096 bytes ((2 * 2047) + (2 bytes
for the implicit PC increment)). If the target of the jump is at a distance of
4098 bytes, it is out of range for a forward jump - however, a backward jump can
still reach that address if pmem-wrap-around is 8192.
Assume address 0 has rjmp to address 4098. With a wrap around of 8192 and
*without* adjusting for the implicit PC increment of 2 bytes, rjmp .-4096 will
jump to address 4096 (wrap around at 8192 and decreasing addresses from then
on). Adjusting 2 bytes for the implicit PC increment, the actual target is 4098.
avr_relative_distance_considering_wrap_around though, does the wrap around only
if the passed in distance is less than half of the wrap around distance. In this
case, it is exactly equal to half (original distance 4098, adjusted distance of
4096 and wraparound of 8192), and the bypassed wrap around causes the reloc
overflow error.
Fix by wrapping around even if adjusted distance is equal to half of wrap around
distance.
bfd/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
(arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
elfcpp/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm.h (Tag_MVE_arch): Define new enum value.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (mve_ext, mve_fp_ext): New features.
(armv8_1m_main_ext_table): Add new extensions.
(aeabi_set_public_attributes): Translate new features to new build attributes.
(arm_convert_symbolic_attribute): Add Tag_MVE_arch.
* doc/c-arm.texi: Document new extensions and new build attribute.
include/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf/arm.h (Tag_MVE_arch): Define new enum value.
* opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
Fixes a failure seen with MALLOC_PERTURB_=1.
* elf32-arm.c (elf32_arm_write_section): Don't leave
error case of STM32L4XX_ERRATUM_BRANCH_TO_VENEER with
unitialised section contents.
PR 19921
binutils* objcopy.c: Add new option --verilog-data-width. Use it to set
the value of VerilogDataWidth.
* doc/binutils.texi: Document the new option.
* testsuite/binutils-all/objcopy.exp: Run tests of new option.
* testsuite/binutils-all/verilog-1.hex: New file.
* testsuite/binutils-all/verilog-2.hex: New file.
* testsuite/binutils-all/verilog-4.hex: New file.
* testsuite/binutils-all/verilog-8.hex: New file.
* NEWS: Mention the new feature.
bfd * verilog.c: (VerilogDataWidth): New variable.
(verilog_write_record): Emit bytes in VerilogDataWidth bundles.
This fixes the recently added ld-elf/pr24511 test failure on pj-elf.
Incidentally, pj-elf has failed its gas "pj" test since 2005-12-22
(git commit 54758c3e39). I think that makes the target ripe for
obsolescence.
bfd/
* elf32-pj.c (pj_elf_reloc): Don't report undefined weak as an error.
ld/
* testsuite/ld-undefined/weak-undef.exp: Don't xfail pj.
GOT and PLT relocs shouldn't have their symbols replaced with a
section symbol plus added. Nor should the HIGHA TLS relocations,
which failed to be caught by the range test in ppc_fix_adjustable.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA),
(BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA):
Sort before BFD_RELOC_PPC64_DTPREL16_HIGHESTA entry.
gas/
* config/tc-ppc.c (ppc_fix_adjustable): Exclude all GOT and PLT
relocs, and VLE sdarel relocs.
* testsuite/gas/ppc/power4.d: Adjust.
This patch restricts the section names matched in coff_section_type,
a function that translates section names to symbol type, and arranges
to translate section flags to symbol type before looking at names.
The latter change resulted in various test failures due to improper
section flags being used in tests, and by the plugin support, so fix
that too.
The new test fails on many ELF targets that lack .init/fini_array
in their scripts. I've just xfailed those. pru-elf oddly defines
__init_array_begin rather than __init_array_start. I've left that
target as a FAIL, and pj-elf too which reports an error for undefined
weak symbols.
bfd/
PR 24511
* syms.c (coff_section_type): Only allow '.', '$' and numeric
following the standard section names.
(bfd_decode_symclass): Prioritize section flag tests in
decode_section_type before name tests in coff_section_type.
* plugin.c (bfd_plugin_canonicalize_symtab): Init fake_section
and fake_common_section using BFD_FAKE_SECTION. Use "fake" as
their names and choose standard .text section flags for
fake_section.
ld/
PR 24511
* testsuite/ld-elf/pr14156a.d: Allow for .init/.fini being a
data section on hppa64.
* testsuite/ld-elf/pr14156b.d: Likewise.
* testsuite/ld-scripts/pr18963.t: Map standard sections to set
output section flags.
* testsuite/ld-scripts/sane1.t: Likewise.
* testsuite/ld-elf/init-fini-arrays.s: Reference __init_array_start
and __fini_array_start. Define __start et al.
* testsuite/ld-elf/pr24511.d: New test.
When undefined non-weak references in IR objects are optimized out
by LTO, we can have weak dynamic referencs to symbols marked with
bfd_link_hash_undefined. We shouldn't complain such undefined weak
dynamic references.
bfd/
PR ld/24486
* elflink.c (elf_link_output_extsym): Don't complain undefined
weak dynamic reference.
ld/
PR ld/24486
* testsuite/ld-plugin/lto.exp: Run PR ld/24486 tests.
* testsuite/ld-plugin/pr24486a.c: New file.
* testsuite/ld-plugin/pr24486b.c: Likewise.
* testsuite/ld-plugin/pr24486c.c: Likewise.
This patch aims to improve the definitions of BTI and PAC based PLTs.
The following changes are made:
* PLT0 does not need PAC instructions since the PLTGOT[2] (and PLTGOT[1])
are readonly so they cannot be corrupted at runtime. Thus both PAC plt0
and BTI+PAC plt0 are removed and we can use basic plt0 and BTI plt0
instead, respectively.
* We can remove the extra padding nops when we add the new bti instructions.
BTI plt0 and BTI TLSDESC plt are updated.
* For better performance PLTn could be padded to 24bytes. Both BTI pltn and
PAC pltn are updated.
*** bfd/ChangeLog ***
2019-04-25 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): Remove.
(PLT_BTI_TLSDESC_ENTRY_SIZE): Remove.
(PLT_PAC_ENTRY_SIZE, PLT_BTI_PAC_ENTRY_SIZE): Remove.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): Update.
(elfNN_aarch64_small_plt0_pac_entry): Remove.
(elfNN_aarch64_small_plt0_bti_pac_entry): Remove.
(elfNN_aarch64_small_plt0_bti_entry): Update.
(elfNN_aarch64_small_plt_bti_entry): Update.
(elfNN_aarch64_small_plt_pac_entry): Update.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): Update.
(setup_plt_values): Setup new entries.
(elfNN_aarch64_finish_dynamic_sections): Remove size change.
(elfNN_aarch64_plt_sym_val): Likewise.
*** ld/ChangeLog ***
2019-04-25 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/bti-pac-plt-1.d: Update.
* testsuite/ld-aarch64/bti-pac-plt-2.d: Update.
* testsuite/ld-aarch64/bti-plt-1.d: Update.
* testsuite/ld-aarch64/bti-plt-3.d: Update.
* testsuite/ld-aarch64/bti-plt-5.d: Update.
* testsuite/ld-aarch64/pac-plt-1.d: Update.
* testsuite/ld-aarch64/pac-plt-2.d: Update.
This tidies the remaining --no-print-map-discarded fails. h8300-elf
warns on a section without flags, and s12z doesn't support
--gc-sections.
bfd/
* elf32-s12z.c (elf_backend_can_gc_sections): Don't define
ld/
* testsuite/ld-gc/skip-map-discarded.s: Add section attributes.
* testsuite/lib/ld-lib.exp (check_gc_sections_available): Add
s12z to list of targets not supporting --gc-sections.
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case.
Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg ().
A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match.
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal
relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (parse_sys_vldr_vstr): New function.
(OP_VLDR): New enum operand_parse_code enumerator.
(parse_operands): Add logic for OP_VLDR.
(do_t_vldr_vstr_sysreg): New function.
(do_vldr_vstr): Likewise.
(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
uses of VLDR and VSTR.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
above bad uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
VSTR valid uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
above examples.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %J and %K format
specifier. Add entries for VLDR and VSTR of system registers.
(print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in
coprocessor instructions on Armv8.1-M Mainline targets. Add handling
of %J and %K format specifier.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds support to the Scalar low overhead loop instructions:
LE
WLS
DLS
We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions.
ChangeLog entries are as follows:
*** bfd/ChnageLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
*** gas/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR
for the LR operand and optional LR operand.
(parse_operands): Add switch cases for OP_LR and OP_oLR for
both type checking and value checking.
(encode_thumb32_addr_mode): New entries for DLS, WLS and LE.
(v8_1_loop_reloc): New helper function for handling labels
for the low overhead loop instructions.
(do_t_loloop): New function to encode DLS, WLS and LE.
(insns): New entries for WLS, DLS and LE.
(md_pcrel_from_section): New switch case
for BFD_RELOC_ARM_THUMB_LOOP12.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-tloop.s: New.
* testsuite/gas/arm/armv8_1-m-tloop.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.s: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.l: New.
*** opcodes/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %P
and %Q patterns.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum.
ChangeLog entries are as follows:
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfcsel.s: New.
* testsuite/ld-arm/bfcsel.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfcsel.
(print_insn_thumb32): Edit the switch case for %Z.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the BFCSEL instructions which is one of the first
instructions in Arm that have more than one relocations in them.
This adds a new relocation R_ARM_THM_BF12.
The inconsistency between external R_ARM_THM_BF12 and internal
BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the
immediate and we don't externally.
ChangeLog entries are as follows :
ChangeLog entries are as follows :
*** bfd/ChnageLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF13): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13
and R_ARM_THM_BF12 together.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13.
*** elfcpp/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF12): New relocation code.
*** gas/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF13.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12.
*** opcodes/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them.
This adds a new relocation R_ARM_THM_BF18.
The inconsistency between external R_ARM_THM_BF18 and internal
BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF19): New
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19
and R_ARM_THM_BF18 together.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19.
*** elfcpp/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF18): New relocation code.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF19.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them.
This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16.
The inconsistency between external R_ARM_THM_BF16 and internal
BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17
and R_ARM_THM_BF16 together.
(get_value_helper): New reloc helper.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16.
*** elfcpp/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF16): New relocation code.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF17.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the Branch Future instructions (BF, BFX, BFL, BFLX,
BFCSEL). These are the first instructions in ARM that have more than one
relocations in them.
This is the first infrastructure patch that adds a new bfd_reloc_code_real enum
for the fallback branch offset.
This is common for all such instructions and needs to be resolvable by the
assembler.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BRANCH5): New enum.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BRANCH5.
(v8_1_branch_value_check): New function to check branch
offsets.
(md_appdy_fix): New switch case for
BFD_RELOC_THUMB_PCREL_BRANCH5.
(tc_gen_reloc): Likewise.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
When using DF_BIND_NOW on AArch64 we don't reserve the GOT slot for a TLSDESC,
but we still emitted DT_TLSDESC_GOT and DT_TLSDESC_PLT. This caused random
memory corruption as the "special" value of (bfd_vma)-1 would be set for
dt_tlsdesc_got.
Since we don't have a value of dt_tlsdesc_got I also don't emit DT_TLSDESC_PLT
now becuase it would point to an incomplete PLT. To be able to write the PLT
entry DT_TLSDESC_GOT is needed and since we don't have one we can't write the
PLT entry either.
It is my understanding that GLIBC doesn't need these two entries when not lazy
loading. Conversely AArch32 does not reserve neither the GOT not the PLT slot
when doing DF_BIND_NOW.
AArch32 does not need these checks because these values are initialized to 0
and so the if (...) checks don't pass, but on AArch64 these are initialized
to (bfd_vma)-1 and thus we need some extra checks.
bfd/ChangeLog:
PR ld/24302
* elfnn-aarch64.c (elfNN_aarch64_size_dynamic_sections): Don't emit
DT_TLSDESC_GOT and DT_TLSDESC_PLT when DF_BIND_NOW.
(elfNN_aarch64_finish_dynamic_sections): Don't write PLT if DF_BIND_NOW.
ld/ChangeLog:
PR ld/24302
* testsuite/ld-aarch64/aarch64-elf.exp: Add new test.
* testsuite/ld-aarch64/tls-relax-gdesc-le-now.d: New test.
x86_64-rdos is one of the few x86_64 targets that is 64-bit only and
the x86_64 configure entries don't depend on elf-vxworks.lo. This
results in undefined references from elfxx-x86.o.
* configure.ac (elfxx_x86): Define and use.
* configure: Regenerate.
This fixes a glib build failure reported in PR 24389. Using ld -b binary
creates an object file with no elf header flags set which has the wrong ABI
info for riscv64-linux. But the file also has no code sections, so I added
code borrowed from the arm port that only checks the ELF header ABI flags if
there is a code section.
bfd/
PR 24389
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Move read of
ELF header flags to after check for ELF object file. Loop through
sections looking for code sections, if none, then skip ABI checks.
shrink_dynamic_reloc_sections must remove PLT entry that was created for
an undefined weak symbol in the presence of --export-dynamic option when
relaxation coalesces literals pointing to that symbol. This fixes the
following assertion:
ld: BFD (GNU Binutils) 2.31.1 internal error, aborting at
elf32-xtensa.c:3292 in elf_xtensa_finish_dynamic_sections
2019-03-29 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (shrink_dynamic_reloc_sections): Add
info->export_dynamic to the conditional.
ld/
* testsuite/ld-xtensa/relax-undef-weak-pie-export-dynamic.d: New
test definition.
* testsuite/ld-xtensa/xtensa.exp
(relax-undef-weak-pie-export-dynamic): Add new test.
Tamar Christina
Senthil Kumar Selvaraj
GDB Administrator
Nick Clifton
Andre Vieira
Alan Modra
Jamey Hicks
H.J. Lu
Sudakshina Das
Jim Wilson
Michael Forney
Max Filippov