2005-09-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-stack.s, gas/i386/x86-64-stack.d,
gas/i386/x86-64-stack-suffix.d, gas/i386/x86-64-stack-intel.d: New.
* gas/i386/i386.exp: Run new tests.
ld/testsuite/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* ld-x86-64/tlspic.dd: Adjust.
opcodes/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (stack_v_mode): Renamed from branch_v_mode.
(indirEv): Use it.
(stackEv): New.
(Ob64, Ov64): Rename to Ob, Ov. Delete unused original definitions.
(dis386): Document and use new 'V' meta character. Use it for
single-byte push/pop opcode forms. Use stackEv for mod-r/m push/pop
opcode forms. Correct typo in 'pop ss'. Replace Ob64/Ov64 by Ob/Ov.
(putop): 'q' suffix for 'T' and 'U' meta depends on DFLAG. Mark
data prefix as used whenever DFLAG was examined. Handle 'V'.
(intel_operand_size): Use stack_v_mode.
(OP_E): Use stack_v_mode, but handle only the special case of
64-bit mode without operand size override here; fall through to
v_mode case otherwise.
(OP_REG): Special case rAX_reg ... rDI_reg only when 64-bit mode
and no operand size override is present.
(OP_J): Use get32s for obtaining the displacement also when rex64
is present.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (intel_operand_size): New, broken out from OP_E for
re-use.
(OP_E): Call intel_operand_size, move call site out of mode
dependent code.
(OP_OFF): Call intel_operand_size if suffix_always. Remove
ATTRIBUTE_UNUSED from parameters.
(OP_OFF64): Likewise.
(OP_ESreg): Call intel_operand_size.
(OP_DSreg): Likewise.
(OP_DIR): Use colon rather than semicolon as separator of far
jump/call operands.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Adjust.
2005-07-05 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuSVME): New.
(CpuUnknownFlags): Include CpuSVME.
* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
as alias of sledgehammer.
(md_assemble): Include invlpga in the check for insns with two source
operands.
(process_operands): Include SVME insns in the check for ignored
segment overrides. Adjust diagnostic.
(i386_index_check): Special-case SVME insns with memory operands.
gas/testsuite/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* gas/i386/svme.d: New.
* gas/i386/svme.s: New.
* gas/i386/svme64.d: New.
* gas/i386/i386.exp: Run new tests.
include/opcode/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add new insns.
opcodes/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SVME_Fixup): New.
(grps): Use it for the lidt entry.
(PNI_Fixup): Call OP_M rather than OP_E.
(INVLPG_Fixup): Likewise.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Account for 32-bit displacements being shown
in hex.
opcodes/
2005-05-25 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_E): In Intel mode, display 32-bit displacements in
hex (but retain it being displayed as signed). Remove redundant
checks. Add handling of displacements for 16-bit addressing in Intel
mode.
* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
include/opcode/ChangeLog:
* i386.h: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr. Provide aliases without hyphens.
opcodes/ChangeLog:
* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr.
2005-04-01 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (PNI_Fixup): Neither mwait nor monitor have any
visible operands in Intel mode. The first operand of monitor is
%rax in 64-bit mode.
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run segment and inval-seg for i386. Run
x86-64-segment and x86-64-inval-seg for x86-64.
* gas/i386/intel.d: Expect movw for moving between memory and
segment register.
* gas/i386/naked.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/opcode.s: Use movw for moving between memory and
segment register.
* gas/i386/x86-64-opcode.s: Likewise.
* : Likewise.
* gas/i386/inval-seg.l: New.
* gas/i386/inval-seg.s: New.
* gas/i386/segment.l: New.
* gas/i386/segment.s: New.
* gas/i386/x86-64-inval-seg.l: New.
* gas/i386/x86-64-inval-seg.s: New.
* gas/i386/x86-64-segment.l: New.
* gas/i386/x86-64-segment.s: New.
include/opcode/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Don't allow the `l' suffix for moving
moving between memory and segment register. Allow movq for
moving between general-purpose register and segment register.
opcodes/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (SEG_Fixup): New.
(Sv): New.
(dis386): Use "Sv" for 0x8c and 0x8e.
2005-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386/i386.exp: Run "sib".
* gas/i386/sib.d: New file.
* gas/i386/sib.s: Likewise.
opcodes/
2005-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E): Ignore scale when index == 0x4 in SIB.
2004-11-04 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
intel syntax and no register prefix, allow $ in symbol names when
intel syntax.
(set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
(intel_float_operand): Add fourth return value indicating math control
operations. Make classification more precise.
(md_assemble): Complain if memory operand of mov[sz]x has no size
specified.
(parse_insn): Translate word operands to floating point instructions
operating on integers as well as control instructions to short ones
as expected by AT&T syntax. Translate 'd' suffix to short one only for
floating point instructions operating on non-integer operands.
(match_template): Remove fldcw special case. Adjust q-suffix handling
to permit it on fild/fistp/fisttp in AT&T mode.
(process_suffix): Don't guess DefaultSize insns' suffix from
stackop_size for certain floating point control instructions. Guess
suffix for branch and [ls][gi]dt based on flag_code. Split error
messages for Intel and AT&T syntax, and make the condition more strict
for the former. Adjust suppressing of generation of operand size
overrides.
(intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
more error checking.
* config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
gas/testsuite/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/i386.exp: Execute new tests intelbad and intelok.
* gas/i386/intelbad.[sl]: New test to check for various things not
permitted in Intel mode.
* gas/i386/intel.d, gas/i386/opcode.d, gas/i386/x86-64-opcode.d:
Adjust for change to segment register store.
* gas/i386/intelok.[sd]: New test to check various Intel mode specific
things get handled correctly.
* gas/i386/x86_64.[sd]: Remove unsupported constructs referring to
'high' and 'low' parts of an operand, which the parser previously
accepted while neither telling that it's not supported nor that it
ignored the remainder of the line following these supposed keywords.
include/opcode/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386.h (sldx_Suf): Remove.
(FP, l_FP, sl_FP, x_FP): Don't imply IgnoreSize.
(q_FP): Define, implying no REX64.
(x_FP, sl_FP): Imply FloatMF.
(i386_optab): Split reg and mem forms of moving from segment registers
so that the memory forms can ignore the 16-/32-bit operand size
distinction. Adjust a few others for Intel mode. Remove *FP uses from
all non-floating-point instructions. Unite 32- and 64-bit forms of
movsx, movzx, and movd. Adjust floating point operations for the above
changes to the *FP macros. Add DefaultSize to floating point control
insns operating on larger memory ranges. Remove left over comments
hinting at certain insns being Intel-syntax ones where the ones
actually meant are already gone.
opcodes/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
(indirEb): Remove.
(Mp): Use f_mode rather than none at all.
(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
replaces what previously was x_mode; x_mode now means 128-bit SSE
operands.
(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
pinsrw's second operand is Edqw.
(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
mode when an operand size override is present or always suffixing.
More instructions will need to be added to this group.
(putop): Handle new macro chars 'C' (short/long suffix selector),
'I' (Intel mode override for following macro char), and 'J' (for
adding the 'l' prefix to far branches in AT&T mode). When an
alternative was specified in the template, honor macro character when
specified for Intel mode.
(OP_E): Handle new *_mode values. Correct pointer specifications for
memory operands. Consolidate output of index register.
(OP_G): Handle new *_mode values.
(OP_I): Handle const_1_mode.
(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
respective opcode prefix bits have been consumed.
(OP_EM, OP_EX): Provide some default handling for generating pointer
specifications.
* i386.h (i386_optab): Remove fildd, fistpd and fisttpd.
opcodes/
* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.
gas/testsuite/
* gas/i386/prescott.s: Remove fisttpd and fisttpq.
* gas/i386/prescott.d: Update.
(M, Mp): Use OP_M.
(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
(GRPPADLCK): Define.
(dis386): Use NOP_Fixup on "nop".
(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
(twobyte_has_modrm): Set for 0xa7.
(padlock_table): Delete. Move to..
(grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence
and clflush.
(print_insn): Revert PADLOCK_SPECIAL code.
(OP_E): Delete sfence, lfence, mfence checks.
* gas/i386/katmai.d: Revert last change.
(INVLPG_Fixup): New function.
(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.
* opcode/i386.h (i386_optab): Remove CpuNo64 from sysenter and
sysexit.
* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
(OP_E): Twiddle clflush to sfence here.
gas/testsuite/
* gas/i386/katmai.d: Adjust for clflush change.
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
Instructions.
* gas/config/tc-i386.h (CpuPNI): New.
(CpuUnknownFlags): Add CpuPNI.
gas/testsuite/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add prescott.
* gas/i386/prescott.d: New file.
* gas/i386/prescott.s: Likewise.
include/opcode/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Precott New Instructions.
opcodes/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
Intel Precott New Instructions.
(PREGRP27): New. Added for "addsubpd" and "addsubps".
(PREGRP28): New. Added for "haddpd" and "haddps".
(PREGRP29): New. Added for "hsubpd" and "hsubps".
(PREGRP30): New. Added for "movsldup" and "movddup".
(PREGRP31): New. Added for "movshdup" and "movhpd".
(PREGRP32): New. Added for "lddqu".
(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
entry 0xd0. Use PREGRP32 for entry 0xf0.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(grps): Use PNI_Fixup in the "sidtQ" entry.
(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
PREGRP31 and PREGRP32.
(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
Use "fisttpll" in entry 1 in opcode 0xdd.
Use "fisttp" in entry 1 in opcode 0xdf.
* arc.h (arc_ext_opcodes): Declare as extern.
(arc_ext_operands): Declare as extern.
* i860.h (i860_opcodes): Declare as const.
2002-11-18 Klee Dienes <kdienes@apple.com>
* arc-opc.c (arc_ext_opcodes): Define.
(arc_ext_operands): Define.
* i386-dis.c (Suffix3DNow): Declare as const.
* arm-opc.h (arm_opcodes): Declare as const.
(thumb_opcodes): Declare as const.
* h8500-opc.h (h8500_table): Declare as const.
(h8500_table): Use a NULL for the opcode in the terminator, so
that code testing (opcode->name) behaves correctly.
* mcore-opc.h (mcore_table): Declare as const.
* sh-opc.h (sh_table): Declare as const.
* w65-opc.h (optable): Declare as const.
* z8k-opc.h (z8k_table): Declare as const.
* doc/binutils.texi (objdump): Document x86 -M options.
include/ChangeLog
* dis-asm.h (print_insn_i386): Declare.
opcodes/ChangeLog
* disassemble.c (disassembler): Call print_insn_i386.
* i386-dis.c (SUFFIX_ALWAYS): Define.
(struct dis_private): Add orig_sizeflag.
(print_insn_i386): Make it a wrapper, calling..
(print_insn): ..The old body of print_insn_i386. Avoid longjmp
warning without using volatile by moving orig_sizeflag to priv,
and removing inbuf. Parse disassembler_options.
(print_insn_i386_att, print_insn_i386_intel): Move initialisation
code to print_insn.
(putop): Remove #ifdef SUFFIX_ALWAYS.
accept WordReg.
* i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
category instead of Ew.
* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
(OP_J): Use bfd_vma for mask to work properly with 64 bits.
(op_address,op_riprel): Use bfd_vma to handle 64 bits.
(cond_jump_mode, loop_jcxz_mode): Define.
(dis386_att): Add cond_jump_flag and loop_jcxz_flag as
appropriate, and 'F' suffix to loop insns.
(disx86_64_att): Likewise.
(dis386_twobyte_att): Likewise.
(print_insn_i386): Don't output addr prefix for loop, jcxz insns.
Output data size prefix for long conditional jumps. Output cs and
ds branch hints.
(putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
(OP_J): Don't make PREFIX_DATA used.
(need_modrm): Give it file scope.
(MODRM_CHECK): Define.
(dofloat): Use MODRM_CHECK.
(OP_E): Likewise.
(OP_EM): Likewise.
(OP_EX): Likewise.
and fix testsuite yet again now that we are getting correct disassembly.
Alan Modra
Jan Beulich
H.J. Lu
Nick Clifton
Mark Kettenis
Michal Ludvig
Jakub Jelinek
Andreas Jaeger
Doug Evans
Klee Dienes
Jan Hubicka
Kazu Hirata