This patch drops gdb's configury support for glibc's mcheck function.
It has been observed to cause false abort()s, because it is
thread-unsafe yet interposes every malloc/free operation. So if any
library transitively used by gdb also uses threads, then these
functions can easily corrupt their own checking data. These days, gcc
ASAN and valgrind provide high quality checking, and mcheck is
apparently itself being slowly deprecated.
So, let's stop linking to it. Attached patch drops the
autoconf/Makefile machinery for both gdb and gdbserver. No
testsuite-visible impact. IMHO not worth mentioning in NEWS.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939
gdb/ChangeLog
PR build/24886
* configure.ac: Drop enable-libmcheck support.
* configure, config.in: Rebuild.
* libmcheck.m4: Remove.
* acinclude.m4: Don't include it.
* Makefile.in: Don't distribute it.
* top.c (print_gdb_configuration): Don't mention it.
gdb/gdbserver/ChangeLog
PR build/24886
* configure.ac: Drop enable-libmcheck support.
* configure, config.in: Rebuild.
* acinclude.m4: Don't include it.
This adds more styling to the disassemble command. In particular,
addresses and function names in the disassembly are now styled.
This required fixing a small latent bug in set_output_style. This
function always passed NULL to emit_style_escape; but when writing to
a file other than gdb_stdout, it should emit the style escape
directly. (FWIW this is another argument for better integrating the
pager with ui_file and getting rid of this entire layer.)
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* utils.c (set_output_style): Sometimes pass stream to
emit_style_escape.
* ui-out.h (class ui_out) <can_emit_style_escape>: Declare.
* record-btrace.c (btrace_insn_history): Update.
* mi/mi-out.h (class mi_ui_out) <can_emit_style_escape>: New
method.
* disasm.h (gdb_pretty_print_disassembler): Add uiout parameter.
Update initializers.
<m_uiout>: New field.
<m_di>: Move lower.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Remove "uiout" parameter.
(dump_insns): Update.
* cli-out.h (class cli_ui_out) <can_emit_style_escape>: Declare.
* cli-out.c (cli_ui_out::can_emit_style_escape): New method.
gdb/testsuite/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add disassemble test.
* gdb.base/style.c (some_called_function): New function.
(main): Use it.
For better readability and type safety.
gdb/ChangeLog:
2019-08-06 Christian Biesinger <cbiesinger@google.com>
* symtab.c (symbol_cache_lookup): Change int to enum block_enum.
(error_in_psymtab_expansion): Likewise.
(lookup_symbol_via_quick_fns): Likewise.
(basic_lookup_transparent_type_quick): Likewise.
(basic_lookup_transparent_type_1): Likewise.
print_source_lines_base reopens the source file every time that a
source line is to be printed. However, there's no need to do this so
frequently -- it's enough to do it when switching source files, and
otherwise rely on the cache.
The code seems to try to avoid these multiple opens; at a guess I'd
say something just got confused along the way.
This patch fixes the problem by reorganizing the code both to make it
more clear, and to ensure that reopens only occur when the "last
source visited" changes.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* source.c (last_source_error): Now bool.
(print_source_lines_base): Make "noprint" bool. Only open
source file when last_source_visited changes.
Currently, gdb stores the number of lines and an array of file offsets
for the start of each line in struct symtab. This patch moves this
information to the source cache. This has two benefits.
First, it allows gdb to read a source file less frequently.
Currently, a source file may be read multiple times: once when
computing the file offsets, once when highlighting, and then pieces
may be read again while printing source lines. With this change, the
file is read once for its source text and file offsets; and then
perhaps read again if it is evicted from the cache.
Second, if multiple symtabs cover the same source file, then this will
share the file offsets between them. I'm not sure whether this
happens in practice.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* annotate.c (annotate_source_line): Use g_source_cache.
* source-cache.c (source_cache::get_plain_source_lines): Change
parameters. Populate m_offset_cache.
(source_cache::ensure): New method.
(source_cache::get_line_charpos): New method.
(extract_lines): Move lower. Change parameters.
(source_cache::get_source_lines): Move lower.
* source-cache.h (class source_cache): Update comment.
<get_line_charpos>: New method.
<get_source_lines>: Update comment.
<clear>: Clear m_offset_cache.
<get_plain_source_lines>: Change parameters.
<ensure>: New method
<m_offset_cache>: New member.
* source.c (forget_cached_source_info_for_objfile): Update.
(info_source_command): Use g_source_cache.
(find_source_lines, open_source_file_with_line_charpos): Remove.
(print_source_lines_base, search_command_helper): Use g_source_cache.
* source.h (open_source_file_with_line_charpos): Don't declare.
* symtab.h (struct symtab) <nlines, line_charpos>: Remove.
* tui/tui-source.c (tui_source_window::do_scroll_vertical):
Use g_source_cache.
Currently the source cache will only store highlighted text. However,
there's no reason it could not also store plain text, when styling is
turned off.
This patch makes this change. This also simplifies the source cache
code somewhat.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* source-cache.c (source_cache::get_plain_source_lines):
Remove "first_line" and "last_line" parameters.
(source_cache::get_source_lines): Cache plain text.
* source-cache.h (class source_cache)
<get_plain_source_lines>: Update.
The source cache was not returning the final \n of the requested range
of lines. This caused regressions with later patches in this series,
so this patch pre-emptively fixes the bug.
This adds a self-test of "extract_lines" to the source cache code. To
make it simpler to test, I changed extract_lines to be a static
function, and changed it's API a bit.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* source-cache.c (extract_lines): No longer a method.
Changed type of parameter. Include final newline.
(selftests::extract_lines_test): New function.
(_initialize_source_cache): Likewise.
* source-cache.h (class source_cache)
<extract_lines>: Don't declare.
This changes breakpoint::filter to be a unique_xmalloc_ptr, removing
an explicit xfree, as well as a use of a "release" method.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* breakpoint.c (init_breakpoint_sal): Update.
(breakpoint): Update.
* breakpoint.h (struct breakpoint) <filter>: Now a
unique_xmalloc_ptr.
This is a mostly cosmetic fix for cases like PR24873 where LTO
recompiled objects were supposed to be inserted inside a group. The
specific case handled by this patch is when the first file inside a
group is an archive, the first file claimed by the plugin. Prior to
this patch we would have inserted the recompiled objects before the
group, which doesn't matter really since the entire group will be
reloaded, but it looks a little wrong in map files.
PR 24873
* ldlang.c (find_replacements_insert_point): Return "before" flag.
(find_next_input_statement): New function.
(lang_process): When placing recompiled LTO objects before a
claimed archive, place them immediately before in the statement
list.
Reloading of archives (and checking --as-needed DSOs again) is
disabled until we hit the plugin insert point. It's necessary to do
that because in a case like lib1.a lto.o lib2.a where lib1.a and
lib2.a contain duplicate symbols, we want the lto.o recompiled object
to pull in objects from lib2.a as necessary, but not from lib1.a.
Unfortunately this heuristic fails when the insert point is inside a
group, because ld actually loads the symbols from the recompiled
object before running over the contours of the script, thus missing
the fact that new undefs appeared in the group.
PR 24873
* ldlang.c (plugin_undefs): New static var.
(open_input_bfds <lang_group_statement_enum>): Loop on
plugin_undefs and hitting plugin_insert point.
(lang_process <lto_plugin_active>): Set plugin_undefs.
Currently we support iteration on blocks; this patch extends that to make
subscript access work as well.
gdb/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention dictionary access on blocks.
* python/py-block.c (blpy_getitem): New function.
(block_object_as_mapping): New struct.
(block_object_type): Use new struct for tp_as_mapping field.
gdb/doc/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* python.texi (Blocks In Python): Document dictionary access on blocks.
gdb/testsuite/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* gdb.python/py-block.exp: Test dictionary access on blocks.
Based on an explanation by tromey on IRC.
gdb/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* objfiles.h (objfile): Add a comment describing partial symbols.
Running
make check-read1 TESTS="gdb.mi/list-thread-groups-available.exp"
on my machine results in timeout failures. Running it while having
`tail -F testsuite/gdb.log` on the side shows that the test is never
really blocked, it is just slow at consuming the large output generated
by `-list-thread-groups --available` (which lists all the processes on
the system).
If I increase the timeout to a large value, the test passes in ~30
seconds (compared to under 1 second normally).
Increase the timeout for the particular mi_gdb_test that is long to
execute under read1. The new timeout value is a bit arbitrary. The
default timeout is 10 seconds, so I set the new timeout to be
"old-timeout * 10", so 100 seconds in the typical case.
gdb/testsuite/ChangeLog:
PR gdb/24863
* gdb.mi/list-thread-groups-available.exp: Increase timeout for
-list-thread-groups --available test when running under
check-read1.
When running tests with check-read1, we run into some timeouts where the tests
are not easy to rewrite using gdb_test_sequence:
...
FAIL: gdb.base/help.exp: help data (timeout)
FAIL: gdb.base/help.exp: help files (timeout)
FAIL: gdb.base/help.exp: help internals (timeout)
FAIL: gdb.base/help.exp: help user-defined (timeout)
FAIL: gdb.base/help.exp: help breakpoint "b" abbreviation (timeout)
FAIL: gdb.base/help.exp: help breakpoint "br" abbreviation (timeout)
FAIL: gdb.base/help.exp: help breakpoint "bre" abbreviation (timeout)
FAIL: gdb.base/info-macros.exp: info macros 2 (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: info macros 3 (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: info macros (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: info macros 7 (timeout)
FAIL: gdb.cp/nested-types.exp: ptype S10 (limit = -1) // parse failed (timeout)
FAIL: gdb.cp/nested-types.exp: set print type nested-type-limit 1 (timeout)
...
Fix these by increasing the timeout by a factor 10.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-05 Tom de Vries <tdevries@suse.de>
PR testsuite/24863
* lib/gdb.exp (with_read1_timeout_factor): New proc.
* gdb.base/help.exp: Use with_read1_timeout_factor.
* gdb.base/info-macros.exp: Same.
* gdb.cp/nested-types.exp: Same.
Currently some code in gdb uses build_help with N_(), like:
static const std::string compile_print_help
= gdb::option::build_help (N_("\
I believe this is incorrect. The N_ macro is used to mark text that
should end up in the message catalog, but which will be translated by
a later call to gettext.
However, in this case, there is no later call to gettext, so (if gdb
had translations), this text would remain untranslated.
Instead, I think using the ordinary _() macro is correct here.
Translators will have to know to preserve "%OPTIONS%" in the text --
but that seems both unavoidable and fine.
Tested by rebuilding as there's not much else to do.
gdb/ChangeLog
2019-08-05 Tom Tromey <tromey@adacore.com>
* compile/compile.c (_initialize_compile): Use _(), not N_().
* thread.c (_initialize_thread): Use _(), not N_().
* stack.c (_initialize_stack): Use _(), not N_().
* printcmd.c (_initialize_printcmd): Use _(), not N_().
Previously GAS would accept .u32, .u16 and .u8 suffixes to the VQ(R)DMLAH and VQ(R)DMLASH
instructions, however the Armv8.1-M Mainline specification states that these functions only
have signed variations (.s32, .s16 and .s8 suffixes).
This is documented here:
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf?_ga=2.143079093.1892401233.1563295591-999473562.1560847439#page=1183
gas * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro.
(do_neon_qrdmlah): Use N_S_32 macro.
* testsuite/gas/arm/mve-vqdmlah-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests.
opcodes * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH
instructions.
When running gdb.base/break-idempotent.exp with
--target_board=unix/-fno-PIE/-no-pie, we get:
...
nr of expected passes 140
...
The test-case is compiled once with nopie and once with pie, but in both cases
we end up with a non-PIE executable. The "-fno-PIE -no-pie" options specified
using the target_board are interpreted by dejagnu as multilib_flags, and end up
overriding the pie flags.
Fix this by checking in gdb_compile if the resulting exec is non-PIE despite of
a pie setting, and if so return an error:
...
Running gdb/testsuite/gdb.base/break-idempotent.exp ...
gdb compile failed, pie failed to generate PIE executable
=== gdb Summary ===
nr of expected passes 70
nr of untested testcases 1
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-05 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (version_at_least): Factor out of ...
(tcl_version_at_least): ... here.
(gdb_compile): Fail if pie results in non-PIE executable.
(readelf_version, readelf_prints_pie): New proc.
(exec_is_pie): Return -1 if unknown.
In tcl_version_at_least we compare a minor against a major version number:
...
} elseif { $tcl_version_major == $major \
&& $tcl_version_major >= $minor } {
...
Fix this by using $tcl_version_minor in the comparison instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-05 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (tcl_version_at_least): Fix typo.
While reading that code, I noticed that some variables essentially meant
whether to consider some other variable or not. I think using
gdb::optional (which was not available when this code was written) is
clearer, as it embeds the used/not used predicate directly in the type
of the variable, making it harder to miss.
gdb/ChangeLog:
* dwarf2read.c (struct dw2_symtab_iterator):
<want_specific_block>: Remove.
<block_index>: Change type to gdb::optional.
(dw2_symtab_iter_init): Remove WANT_SPECIFIC_BLOCK parameter,
change type of BLOCK_INDEX parameter to gdb::optional.
(dw2_symtab_iter_next): Re-write in function of gdb::optional.
(dw2_lookup_symbol): Don't pass argument for
WANT_SPECIFIC_BLOCK.
(dw2_expand_symtabs_for_function): Don't pass argument for
WANT_SPECIFIC_BLOCK, pass empty optional for BLOCK_INDEX.
(class dw2_debug_names_iterator)
<dw2_debug_names_iterator>: Remove WANT_SPECIFIC_BLOCK
parameter, change BLOCK_INDEX type to gdb::optional.
<m_want_specific_block>: Remove.
<m_block_index>: Change type to gdb::optional.
(dw2_debug_names_iterator::next): Change type of IS_STATIC to
gdb::optional. Re-write in function of gdb::optional.
(dw2_debug_names_lookup_symbol): Don't pass argument for
WANT_SPECIFIC_BLOCK.
(dw2_debug_names_expand_symtabs_for_function): Don't pass
argument for WANT_SPECIFIC_BLOCK, pass empty optional for
BLOCK_INDEX.
This patch introduces a test for the 'info sources' command
and its new arguments [-dirname | -basename] [--] [REGEXP].
gdb/testsuite/ChangeLog
2019-08-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/info_sources.exp: New file.
* gdb.base/info_sources.c: New file.
* gdb.base/info_sources_base.c: New file.
gdb/ChangeLog
2019-08-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* symtab.c (filename_partial_match_opts): New struct type.
(struct output_source_filename_data): New members
regexp, c_regexp, partial_match.
(output_source_filename): Use new members to decide to print file.
(info_sources_option_defs): New variable.
(make_info_sources_options_def_group, print_info_sources_header,
info_sources_command_completer):
New functions.
(info_sources_command): Read new optional arguments.
(_initialize_symtab): Update info sources help.
A new pair of hooks used by Ada exception handlers, for correct
release of reraised exception occurrences, involves the introduction
of new v1 symbols that GDB should use when available. The older, v0
ABI remains available in newer runtimes for bootstrapping purposes
only.
for gdb/ChangeLog
* ada-lang.c (exception_support_info_v0): Renamed from...
(default_exception_support_info): ... this. Create new
definition for v1.
(ada_has_this_exception_support): Look up catch_handlers_sym.
(ada_exception_support_info_sniffer): Try v0 after default.
Gold version of git commit c213164ad2.
elfcpp/
* powerpc.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::get_reference_flags): Set
flags for new relocations, and some missing older relocs.
(Target_powerpc::Scan::local): Handle new pcrel tls relocs.
Call set_has_static_tls for tprel relocs.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Handle new pcrel tls relocs.
Relocations with right shifts were calculating wrong overflow status.
Since the addr34 split-field reloc is implemented as an 18-bit high
part with value shifted right by 16 and a 16-bit low part, most of the
pc-relative relocs were affected.
* powerpc.cc (Powerpc_relocate_functions::rela, rela_ua): Perform
signed right shift for signed overflow check.
bfd/ChangeLog
Ilia Diachkov <ilia.diachkov@optimitech.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Set lui relax safety area to
two pages in relro presence.
Adjust gdb.base/batch-exit-status.exp so that test prefixes don't show
directory names for the source scripts passed with -x, to make test
results from different build directories comparable.
gdb/testsuite/ChangeLog:
2019-08-01 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.base/batch-exit-status.exp: Call test_exit_status with
prefix argument.
(test_exit_status): Add prefix argument.
check_loop_aligned is used during link time relaxation to only allow
transformations that don't violate loop body alignment requirements.
Assembler can relax loops that have too long body by adding instructions
between the loop instruction and the loop body. check_loop_aligned must
check alignment of the first instruction of the actual loop body.
Detect loop / rsr.lend / wsr.lbeg sequence used in assembly time
relaxation and adjust alignment check when it's detected.
bfd/
2019-08-01 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (insn_num_slots, get_rsr_lend_opcode)
(get_wsr_lbeg_opcode): New functions.
(check_loop_aligned): Detect relaxed loops and adjust loop_len
and insn_len for the first actual instruction of the loop.
This fixes the ia64 libunwind build.
gdb/ChangeLog
2019-08-01 Tom Tromey <tromey@adacore.com>
* ia64-libunwind-tdep.h (struct libunwind_descr): Include
gdbarch.h.
This file exists in binutils-gdb/opcodes, and nothing in Makefile.in adds this
to the include path. Default builds work because in-tree readline adds
binutils-gdb/ to the include path (!). However, this is broken when compiling
with system readline.
Other files already use this way to include files in opcodes:
./gdb/lm32-tdep.c:#include "../opcodes/lm32-desc.h"
./gdb/or1k-tdep.h:#include "../opcodes/or1k-desc.h"
./gdb/mep-tdep.c:#include "../opcodes/mep-desc.h"
etc.
gdb/ChangeLog:
2019-08-01 Christian Biesinger <cbiesinger@google.com>
* s12z-tdep.c: Fix include path for s12z-opc.h.
Gdbserver has failed to build with GNU make 3.81 since commit 08f10e02be.
Update the NEWS file to state that versions earlier than 3.82 are not
supported.
3.82 was released in 2010, 3.81 was released 2006. A quick investigation
of the default GNU make version provided across various distros found the
earliest provided version to be 3.82:
*RHEL 7, Centos 6 - make 3.82
*Fedora 27 - make 4.2.1
*OpenSuse 42.2, SLES11 - make 4.2.1
*Ubuntu 16.04/18.04 - make 4.1
*Debian Jessie - make 4.0
Note that Glibc requires at least 4.0, whereas GCC still allows 3.81.
gdb/ChangeLog:
* NEWS: Require GNU make 3.82.
With gdb.threads/fork-plus-threads.exp and check-run1 we get:
...
FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: \
inferior 1 exited (timeout)
...
Fix this by calling exp_continue for new thread and thread exited messages.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-01 Tom de Vries <tdevries@suse.de>
PR testsuite/24863
* gdb.threads/fork-plus-threads.exp: Fix check-run1 timeout by
calling exp_continue for new thread and thread exited messages.
With gdb.base/structs.exp and check-read1 we get:
...
FAIL: gdb.base/structs.exp: p chartest (timeout)
...
Fix this by using gdb_test_sequence.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-01 Tom de Vries <tdevries@suse.de>
PR testsuite/24863
* gdb.base/structs.exp: Fix check-read1 timeout using
gdb_test_sequence.
* lib/gdb.exp (tcl_version_at_least, lrepeat): New proc.
With gdb.base/break-interp.exp and check-read1, we run get:
...
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: \
BINprelinkNOdebugNOpieNO: symbol-less: info files (timeout)
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: \
BINprelinkNOdebugNOpieYES: symbol-less: info files (timeout)
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: \
BINprelinkNOdebugNOpieNO: symbol-less: info files (timeout)
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: \
BINprelinkNOdebugNOpieYES: symbol-less: info files (timeout)
...
Fix this by calling exp_continue after each "info files" line.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-01 Tom de Vries <tdevries@suse.de>
PR testsuite/24863
* gdb.base/break-interp.exp: Use exp_continue after each "info files"
line.
With gdb.base/signals.exp and check-read1 we get:
...
FAIL: gdb.base/signals.exp: info signals (timeout)
...
Fix this by using gdb_test_sequence.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-01 Tom de Vries <tdevries@suse.de>
PR testsuite/24863
* gdb.base/signals.exp: Fix check-read1 timeout using gdb_test_sequence.
This patch processes INSERT AFTER and INSERT BEFORE in a user -T
script when such a script is invoked on the command line inside
--start-group/--end-group. Also, ld now warns when the user simply
forgot --end-group.
PR 24806
* ldlang.c (process_insert_statements): Add start of list
parameter. Use rather than lang_os_list.head. Process insert
statements inside group statements with a recursive call.
(lang_process): Adjust process_insert_statements call.
* lexsup.c (parse_args): Warn when adding missing --end-group.
The idea is to make it a little easier to find uses of this list,
so searches don't hit occurrences of lang_output_section_statement_type
and lang_output_section_statement_enum.
* ldlang.h (lang_os_list): Rename from lang_output_section_statement.
* ldlang.c: Likewise throughout file.
* emultempl/alphaelf.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/mmo.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
Frank Ch. Eigler
Tom Tromey
Christian Biesinger
Tom Tromey
Alan Modra
GDB Administrator
Nick Clifton
Simon Marchi
Tom de Vries
Barnaby Wilks
Simon Marchi
Sandra Loosemore
Philippe Waroquiers
Alexandre Oliva
Jim Wilson
Pedro Franco de Carvalho
Max Filippov
Alan Hayward