PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
PR binutils/17531
* readelf.c (get_unwind_section_word): Skip reloc processing if
there are no relocs associated with the section.
(decode_tic6x_unwind_bytecode): Warn and return if the stack
pointer adjustment falls off the end of the buffer.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
PR binutils/17531
* readelf.c (process_version_sections): If the read of the version
def information fails, make sure that the external verdef data is
not used.
(get_dynamic_data): Do not attempt to allocate memory for more
dynamic data than there is in the file. If the read fails, free
the allocated buffer.
(process_symbol_table): Do not print dynamic information if we
were unable to read the dynamic symbol table.
(print_gnu_note): Do not print the note if the descsz is too
small.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
PR binutils/17531
* binutils/readelf.c (dynamic_nent): Change type to size_t.
(slurp_rela_relocs): Use size_t type for nrelas.
(slurp_rel_relocs): Likewise.
(get_program_headers): Improve out of memory error message.
(get_32bit_section_headers): Likewise.
(get_32bit_section_headers): Likewise.
(get_64bit_section_headers): Likewise.
(get_32bit_elf_symbols): Likewise.
(get_64bit_elf_symbols): Likewise.
(process_section_groups): Likewise.
(get_32bit_dynamic_section): Likewise.
(get_64bit_dynamic_section): Likewise.
(process_dynamic_section): Likewise.
(process_version_sections): Likewise.
(get_symbol_index_type): Likewise.
(process_mips_specific): Likewise.
(process_corefile_note_segment): Likewise.
(process_version_sections): Use size_t type for total.
(get_dynamic_data): Change type of number parameter to size_t.
Improve out of memory error messages.
(process_symbol_table): Change type of nbuckets and nchains to
size_t. Skip processing of sections headers if there are none.
Improve out of memory error messages.
PR binutils/17531
* (ia64_process_unwind): Replace assertion with an error message.
Add range checking for group section indicies.
(hppa_process_unwind): Replace assertion with an error message.
(process_syminfo): Likewise.
(decode_arm_unwind_bytecode): Add range checking.
(dump_section_as_strings): Add more string range checking.
(display_tag_value): Likewise.
(display_arm_attribute): Likewise.
(display_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_msp430x_attribute): Likewise.
PR binutils/17531
* readelf.c (get_data): Avoid allocating memory when we know that
the read will fail.
(find_section_by_type): New function.
(get_unwind_section_word): Check for invalid symbol indicies.
Check for invalid reloc types.
(get_32bit_dynamic_section): Add range checks.
(get_64bit_dynamic_section): Add range checks.
(process_dynamic_section): Check for a corrupt time value.
(process_symbol_table): Add range checks.
(dump_section_as_strings): Add string length range checks.
(display_tag_value): Likewise.
(display_arm_attribute): Likewise.
(display_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_msp430x_attribute): Likewise.
(process_mips_specific): Add range check.
PR binutils/17552, binutils/17533
* bucomm.c (is_valid_archive_path): New function. Returns false
for absolute pathnames and pathnames that include /../.
* bucomm.h (is_valid_archive_path): Add prototype.
* ar.c (extract_file): Use new function to check for valid
pathnames when extracting files from an archive.
* objcopy.c (copy_archive): Likewise.
* doc/binutils.texi: Update documentation to mention the
limitation on pathname of archive members.
PR binutils/15731
* readelf.c (printable_section_name): New function.
(printable_section_name_from_index): New function.
(dump_relocations): Use new function.
(process_program_headers, get_32bit_elf_symbols,
(get_64bit_elf_symbols, process_section_headers,
(process_section_groups, process_relocs, ia64_process_unwind,
(hppa_process_unwind, get_unwind_section_word, decode_arm_unwind,
(arm_process_unwind, process_version_sections,
(process_symbol_table, apply_relocations, get_section_contents,
(dump_section_as_strings, dump_section_as_bytes,
(display_debug_section, process_attributes, process_mips_specific,
(process_mips_specific process_gnu_liblist): Likewise.
(get_unwind_section_word): Check for a missing symbol table.
Replace aborts with error messages.
(arm_process_unwind): Check for a missing string table.
(process_attributes): Check for an attribute length that is too
small.
(process_mips_specific): Check for a corrupt GOT symbol offset.
PR binutils/17531
(get_32bit_program_headers): Verify program header entry size
before reading in the program headers.
(get_64bit_program_headers): Likewise.
(get_unwind_section_word): Do nothing if no section was provided.
Fail if the offset is outside of the section.
(print_dynamic_symbol): Catch out of range symbol indicies.
(process_mips_specific): Likewise.
(process_attributes): Make sure that there is enough space left in
the section before attempting to read the length of the next
attribute.
PR binutils/17531
* readelf.c (get_data): If the reason parameter is null, do not
print any error messages.
(get_32bit_section_headers): Verify section header entry size
before reading in the section headers.
(get_64bit_section_headers): Likewise.
(process_section_headers): Pass FALSE to get_section_headers.
(get_file_header): Pass TRUE to get_section_headers.
(process_dynamic_section): Change an assert to an error message.
(process_symbol_table): Handle corrupt histograms.
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
PR binutils/17512
* coffgen.c (_bfd_coff_get_external_symbols): Do not try to load a
symbol table bigger than the file.
* elf.c (bfd_elf_get_str_section): Do not try to load a string
table bigger than the file.
* readelf.c (process_program_headers): Avoid memory exhaustion due
to corrupt values in a dynamis segment header.
(get_32bit_elf_symbols): Do not attempt to read an over-large
section.
(get_64bit_elf_symbols): Likewise.
bfd/
* elfxx-mips.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
binutils/
* readelf.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
include/
* elf/mips.h (AFL_ASE_MASK): Define.
%<number>s as an fscanf format does not include the trailing NULL.
PATH_MAX does include the trailing NULL.
PR 17453
* readelf.c (process_program_headers): Correct fscanf format used
for interpreter.
The linker side of pr16563 was fixed with commit 18cd5bce, but
unfortunately people continue to use older linkers with -flto. This
means we have binaries with working .eh_frame that can't be dumped by
readelf, and I'm seeing internal IBM bug reports about this fact.
PR 16563
* dwarf.c (GET): Remove semicolon.
(read_cie): New function, extracted from..
(display_debug_frames): ..here. Correctly handle signed offset
from FDE to CIE in .eh_frame. Decode forward referenced CIEs too.
different architecture tags. Add a test case to make sure that this works,
and update readelf so that it will not seg-fault when trying to display the
attributes of binaries with invalid architecture tags.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Return false if
failed to merge.
* ld-arm/attr-merge-arch-2.d: New test case.
* ld-arm/attr-merge-arch-2a.s: New test case source file.
* ld-arm/attr-merge-arch-2b.s: Likewise.
* ld-arm/arm-elf.exp: Run new test case.
* readelf.c (display_arm_attribute): Use unsigned int type for
tag, val and type variables.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
The section name used to store the build-id on pe/coff is arbitrary, as it's
contents should be located using the pe/coff header's DataDirectory debug data
entry, not by using the section name.
But '.build-id' is not a good choice for that section name, as it is 9
characters long, and hence truncated to 8 characters when
--disable-long-section-names is used (which is the default, when producing an
executable with no dwarf debug sections, e.g. using ld --strip-all --build-id)
This truncation then breaks 'objcopy --only-keep-debug', which does use the
section name, due to concerns that keeping an arbitrary section which contains
the debug directory is not sensible.
binutils/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* objcopy.c (is_nondebug_keep_contents_section): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
ld/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
* emultempl/pep.em (write_build_id, setup_build_id): Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
* strings.c: Add -w/--include-all-whitespace option to include any
whitespace character in the displayed strings.
* NEWS: Mention the new feature.
* doc/binutils.texi (strings): Document the new command line
option.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
original patches were posted:
pe/coff: Display GUID build-id in the conventional way
pe/coff: Don't interpret debug directory in section with no contents
pe/coff: Keep .build-id with --only-keep-debug
pe/coff: Don't break .build-id with objcopy/strip
* peXXigen.c (pe_print_debugdata): Don't interpret debug directory
in a section with no contents.
(is_vma_in_section, find_section_by_vma): New functions.
(_bfd_XX_bfd_copy_private_bfd_data_common): Recalculate file
offsets in the debug directory.
(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
Byte-swap GUID from little-endian to big-endian order for
consistent and conventional display.
* objcopy.c (is_nondebug_keep_contents_section): New function.
(setup_section): Use it.
or 64-bit doubles. It also makes the linker complain if the user attempts
to link together binaries with different sized doubles.
* elf32-rl78.c (rl78_elf_merge_private_bfd_data): Complain if
64-bit doubles objects mix with 32-bit doubles objects.
(rl78_elf_print_private_bfd_data): Describe 64-bit doubles flag.
* readelf.c (get_machine_flags): Handle RL78 64-bit doubles flag.
* config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
and OPTION_64BIT_DOUBLES.
(md_longopts): Add -m32bit-doubles and -m64bit-doubles.
(md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
(md_show_usage): Show all of the RL78 options.
(rl78_float_cons): New static functions.
(md_pseudo_table): Update handler for "double".
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
bfd/
* mach-o.h (bfd_mach_o_dyld_info_command): Add rebase_content,
bind_content, weak_bind_content, lazy_bind_content,
export_content.
(bfd_mach_o_load_command): Add comments, add next field.
(mach_o_data_struct): Replace commands field by first_command
and last_command.
* mach-o.c (bfd_mach_o_append_command): New function.
(bfd_mach_o_bfd_copy_private_symbol_data): Add blank lines.
(bfd_mach_o_bfd_copy_private_section_data): Check flavour,
copy fields.
(bfd_mach_o_bfd_copy_private_header_data): Copy load commands.
(bfd_mach_o_pad4, bfd_mach_o_pad_command): New functions.
(bfd_mach_o_write_thread): Use macro instead of literal.
(bfd_mach_o_write_dylinker, bfd_mach_o_write_dylib)
(bfd_mach_o_write_main, bfd_mach_o_write_dyld_info): New
functions.
(bfd_mach_o_write_symtab_content): New function (extracted
from bfd_mach_o_write_symtab).
(bfd_mach_o_write_symtab): Split.
(bfd_mach_o_count_indirect_symbols): Move
(bfd_mach_o_build_dysymtab): Remove layout code.
(bfd_mach_o_write_contents): Rewritten to build commands in order.
(bfd_mach_o_count_sections_for_seg): Remove.
(bfd_mach_o_build_obj_seg_command): New function (extracted from
bfd_mach_o_build_seg_command).
(bfd_mach_o_build_exec_seg_command): New function.
(bfd_mach_o_build_dysymtab_command): Remove.
(bfd_mach_o_layout_commands): New function.
(bfd_mach_o_init_segment): New function.
(bfd_mach_o_build_commands): Major rework to handle non-object
files.
(bfd_mach_o_alloc_and_read, bfd_mach_o_read_dyld_content): New
function.
(bfd_mach_o_read_dyld_info): Clear content fields.
(bfd_mach_o_read_segment): Adjust call.
(bfd_mach_o_flatten_sections): Adjust as now load commands are
chained.
(bfd_mach_o_scan_start_address, bfd_mach_o_scan)
(bfd_mach_o_mkobject_init, bfd_mach_o_get_base_address)
(bfd_mach_o_lookup_command, bfd_mach_o_core_fetch_environment):
Likewise.
binutils/
* od-macho.c (dump_section_map): Adjust as load commands
are now chained.
(dump_load_command, dump_section_content): Likewise.
All strip operations require section headers to be present, as do most
objcopy operations. BFD is seriously confused by objects without
section info. The error message added here is similar to the error
on attempting to strip/objcopy a zero length object.
PR binutils/16811
* objcopy.c (copy_object): Error if no sections.
and have it loaded by default (as long as the --target option isn't used).
PR binutils/14698
ar.c: Set plugin_target early if plugins are supported.
nm.c: Likewise.
binutils/
* od-macho.c (OPT_DATA_IN_CODE): New macro.
(options): Add entry for data in code.
(mach_o_help): Ditto.
(data_in_code_kind_name): New array.
(dump_data_in_code): New function.
(dump_load_command): Handle data in code.
(mach_o_dump): Ditto.
(dump_header): Display a terminal newline.
This patche fixes the values of FDE pc in output of objdump -Wf. They now
match readelf ones.
binutils/
* objdump.c (load_specific_debug_section): Set address of section.
Minor fix in compact unwind output: to be more readable, the stack offset
for indirect compact unwind entries are mutiplied by its factor (4 or 8).
binutils/
* od-macho.c (dump_unwind_encoding_x86): Set the factor.
(dump_exe_compact_unwind): Change the condition. Improve
indentation.
linker testsuite failures were showing up for the cris target. Fixed by
this patch.
* readelf.c (process_version_sections): Fix off-by-one error in
previous delta.
send readelf into an infinite loop.
* readelf.c (process_version_sections): Prevent an infinite loop
when the vn_next field is zero but there are still entries to be
processed.
option coming *after* the command option not before it.
PR binutils/16652
* doc/binutils.texi (ar cmdline): Move --plugin command line
option to after the command option.
When a DW_FORM_flag_present attribute comes at the very end of a
debug section, readelf complains about a corrupt attribute
because it's checking to make sure there's at least one byte of
data remaining. This patch suppresses the check when the form
is DW_FORM_flag_present.
2014-02-11 Cary Coutant <ccoutant@google.com>
* binutils/dwarf.c (read_and_display_attr_value): Don't warn
for zero-length attribute value.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
This removes the last uses of PARAMS from binutils.
The two changes in binutils were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* coffgrok.h (coff_ofile): Don't use PARAMS.
* nlmheader.y (strerror): Don't use PARAMS.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
use PARAMS.
I happened to run readelf on an ELF file created by Guile. readelf
complained about invalid values for DW_FORM_strp. At first I assumed
this was just a Guile bug, but eu-readelf did the right thing, so I
looked a bit deeper.
I came across some old Mach-O code to bias some offsets by section
addresses. Guile, unlike many ELF writers, sets the address for the
various DWARF-related sections, causing this unusual code to be run.
This code came from an old commit:
2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (fetch_indirect_string): Adjust for section address.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
* objdump.c (mach_o_dwarf_sections): New.
(generic_dwarf_sections): Likewise.
(check_mach_o_dwarf): Likewise.
(dump_dwarf): Call check_mach_o_dwarf.
However it was partially reverted here:
https://sourceware.org/ml/binutils/2008-11/msg00134.html
This patch just completes the reversion.
Built and regtested on x86-64 Fedora 18. I also ran the resulting
readelf against the Guile-created object with success.
I have no way of testing this on Mach-O, so your feedback is
solicited.
2013-12-19 Tom Tromey <tromey@redhat.com>
* dwarf.c (fetch_indirect_string): Don't bias by section address.
(fetch_indexed_string): Likewise.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
Nick Clifton
H.J. Lu
Jan-Benedict Glaw
Matthew Fortune
Hans-Peter Nilsson
Naveen H.S
Iain Buclaw
Tristan Gingold
Alan Modra
Jose E. Marchesi
Terry Guo
Kuan-Lin Chen
Andrew Bennett
Jon TURNEY
Richard Henderson
Erik Akermann
Romain Chastenet
Joel Brobecker
Kaushik Phata
Christian Svensson
Markus Trippelsdorf
Anthony Green
Dmitry Gorbachev
Cary Coutant
Andrew Pinski
Tom Tromey
Roland McGrath
Cory Fields
Doug Evans