Follow-up to commit 14f6890677.
global_thread_id_to_ptid expects global thread numbers, which are nowadays only
used in MI, never presented to the user in the CLI. Since this is a CLI
command, it should accept the inferior-qualified format instead.
gdb/
* gnu-nat.c (set_sig_thread_cmd): Use parse_thread_id instead of
global_thread_id_to_ptid.
..., so handle these in "C" mode still:
gdb/
* config/i386/i386gnu.mh (%_S.o %_U.o): Add "-x c" to
"COMPILE.post".
* gnu-nat.c: #include Mach/Hurd headers before all others. Wrap
Mach/Hurd headers and MIG stubs' prototypes in 'extern "C"'.
* i386-gnu-nat.c: Likewise.
GNU/Hurd uses its own "typedef enum __error_t_codes error_t;"
([glibc]/sysdeps/mach/hurd/bits/errno.h), contrary to the default
"typedef int error_t;" ([glibc]/stdlib/errno.h).
The Mach/Hurd RPCs return kern_return_t values, for which, upon assigning them
to an error_t variable, GCC in C++ mode tells us "error: invalid conversion
from 'kern_return_t {aka int}' to 'error_t {aka __error_t_codes}'". Instead of
casting all these RPC return values to "error_t", just use "kern_return_t"
variables:
gdb/
* gnu-nat.c (proc_get_exception_port, proc_set_exception_port)
(INF_RESUME_MSGPORT_RPC, proc_get_state, _proc_get_exc_port)
(proc_steal_exc_port, proc_restore_exc_port, make_proc)
(inf_startup, inf_set_pid, inf_validate_procinfo)
(inf_validate_task_sc, inf_set_traced, inf_validate_procs)
(inf_signal, inf_continue, gnu_wait, S_exception_raise_request)
(do_mach_notify_dead_name, S_proc_wait_reply)
(S_msg_sig_post_untraced_reply, S_msg_sig_post_reply)
(port_msgs_queued, gnu_read_inferior, gnu_write_inferior)
(gnu_find_memory_regions, steal_exc_port, thread_takeover_sc_cmd)
(flush_inferior_icache): Instead of "error_t" use "kern_return_t".
* i386-gnu-nat.c (fetch_fpregs, store_fpregs, i386_gnu_dr_get)
(i386_gnu_dr_set): Likewise.
... by a bit of code refactoring:
gdb/
* gnu-nat.c (set_task_pause_cmd, set_signals_cmd)
(set_exceptions_cmd): Add variants taking an "int arg" instead of
a "char *". Make the "char *" variants use the former.
(set_noninvasive_cmd): Also use the "int arg" variants.
C++ doesn't do implicit type conversions from "void *", so we have to...
gdb/
* i386-gnu-nat.c (i386_gnu_dr_set_control_one)
(i386_gnu_dr_set_addr_one): Explicitly cast "void *".
In the case where we switch to a non-running inferior, we do a
"find_inferior_id (num)", although we did the same call right before.
gdb/ChangeLog:
* inferior.c (inferior_command): Remove duplicate
find_inferior_id call.
This patch adds asserts where the value's lval must be lval_register.
This triggers an error in frame_register_unwind because VALUE_REGNUM
is used but value's lval is not lval_register.
This also reveals a design issue in frame_register_unwind, that is
arguments addrp and realnump are mutually exclusive, we either use
addrp (for lval_memory), or use realnump (for lval_register). This
can be done in a separate patch.
gdb:
2016-12-06 Yao Qi <yao.qi@linaro.org>
* frame.c (frame_register_unwind): Set *realnump if *lvalp is
lval_register.
* value.c (deprecated_value_next_frame_id_hack): Assert
value->lval is lval_register.
(deprecated_value_regnum_hack): Likewise.
This gets rid of more useless pattern matching cases in gdb.base/maint.exp.
gdb/testsuite/ChangeLog:
2016-12-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/maint.exp: Use gdb_test instead of gdb_test_multiple when
possible.
Remove useless pattern-matching code.
New in v2:
- A few adjustments / simplifications were possible now that we
require C++11:
. Use std::unique_ptr to make the user_args_stack std::vector own
its elements:
static std::vector<std::unique_ptr<user_args>> user_args_stack;
. use vector::emplace_back to construct elements directly in the
corresponding vectors.
. use std::to_string instead of adding a gdb::to_string
replacement.
- Now includes a test.
Docs/NEWS are unchanged from v1 and have already been approved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I recently wrote a user-defined command that could benefit from
supporting an unlimited number of arguments:
http://palves.net/list-active-signal-handlers-with-gdb/
E.g., 'info signal-dispositions 1 2 3 4 5 6 7 8 9 10 11'
However, we currently only support up to 10 arguments passed to
user-defined commands ($arg0..$arg9).
I can't find a good reason for that, other than "old code with hard
coded limits". This patch removes that limit and modernizes the code
along the way:
- Makes the user_args struct a real C++ class that uses std::vector
for storage.
- Removes the "next" pointer from within user_args and uses a
std::vector to maintain a stack instead.
- Adds a new RAII-based scoped_user_args_level class to help
push/pop user args in the stack instead of using a cleanup.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* NEWS: Mention that user commands now accept an unlimited number
of arguments.
* cli/cli-script.c: Include <vector>.
(struct string_view): New type.
(MAXUSERARGS): Delete.
(struct user_args): Now a C++ class.
(user_args_stack): New.
(struct scoped_user_args_level): New type.
(execute_user_command): Use scoped_user_args_level.
(arg_cleanup): Delete.
(setup_user_args): Deleted, and refactored as ...
(user_args::user_args): ... this new constructor. Limit of number
of arguments removed.
(insert_user_defined_cmd_args): Defer to user_args_stack.
(user_args::insert_args): New, bits based on old
insert_user_defined_cmd_args with limit of number of arguments
eliminated.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (User-defined Commands): Limit on number of
arguments passed to user-defined commands removed; update.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (user_defined_command_manyargs_test): New
procedure.
(top level): Call it.
We're missing a test that makes sure that arguments to user-defined
commands are handled correctly when a user-defined command calls
another user-defined command / recurses.
The following patch changes that code, so add such a test first so we
can be confident won't be breaking this use case.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (user_defined_command_args_stack_test):
New procedure.
(top level): Call it.
It'd be handy to be able to iterate over command arguments in
user-defined commands, in order to support optional arguments
($arg0..$argN).
I thought I could make it work with "eval", but alas, it doesn't work
currently. E.g., with:
define test
set $i = 0
while $i < $argc
eval "print $arg%d", $i
set $i = $i + 1
end
end
we get:
(gdb) test 1
$1 = void
(gdb) test 1 2 3
$2 = void
$3 = void
$4 = void
(gdb)
The problem is that "eval" doesn't do user-defined command arguments
substitution after expanding its own argument. This patch fixes that,
which makes the example above work:
(gdb) test 1
$1 = 1
(gdb) test 1 2 3
$2 = 1
$3 = 2
$4 = 3
(gdb)
New test included, similar the above, but also exercises expanding
$argc.
I think this is likely to simplify many scripts out there, so I'm
adding an example to the manual and mentioning it in NEWS as well.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* NEWS: Mention "eval" expands user-defined command arguments.
* cli/cli-script.c (execute_control_command): Adjust to rename.
(insert_args): Rename to ...
(insert_user_defined_cmd_args): ... this, and make extern.
* cli/cli-script.h (insert_user_defined_cmd_args): New
declaration.
* printcmd.c: Include "cli/cli-script.h".
(eval_command): Call insert_user_defined_cmd_args.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.texinfo (Define): Add example of using "eval" to process a
variable number of arguments.
(Output) <eval>: Add anchor.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.base/commands.exp (user_defined_command_args_eval): New
procedure.
(top level): Call it.
This reverts the timeout handling (removed by
018572b888) for gdb.cp/ovldbreak.exp until we
decide what to do about this particular function.
gdb/testsuite/ChangeLog:
2016-12-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/ovldbreak.exp (take_gdb_out_of_choice_menu): Restore
timeout handling.
This patch adds support for DW_AT_main_subprogram.
This is PR symtab/16264.
DW_AT_main_subprogram is used to mark a program's entry point. GCC
can emit this, and I hope to change the Rust compiler to emit it as
well.
GDB already supports an older, pre-DWARF 4 convention adopted by
FORTRAN compilers, namely to emit DW_AT_calling_convention for the
"main" function. However, I think this support in GDB had a small
bug, in that it seems to rely on the DW_AT_name being read before
DW_AT_calling_convention. This patch fixes this as well.
Built and regtested on x86-64 Fedora 24 and the buildbot. New test
case included.
2016-12-02 Tom Tromey <tom@tromey.com>
PR symtab/16264:
* dwarf2read.c (struct partial_die_info) <main_subprogram>: New
member.
(add_partial_symbol): Call set_objfile_main_name.
(read_partial_die): Handle DW_AT_main_subprogram.
<DW_AT_calling_convention>: don't call set_objfile_main_name, but
set main_subprogram flag.
2016-12-02 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/main-subprogram.c: New file.
* gdb.dwarf2/main-subprogram.exp: New file.
This patch renames a few trace-related functions, so that they adhere to
the de facto standard of naming command entry point functions
<command>_command. I like the ease of looking up a command entry point
if they all follow that rule.
An enum label "tstop_command" conflicts with a new function name, so I
renamed this one trace_stop_command.
In v2:
- Rename functions of the trace_find family, as well as
trace_dump_command.
gdb/ChangeLog:
* tracefile-tfile.c (tfile_write_status): Adjust to renames.
* tracefile.c (trace_save_command): Rename to...
(tsave_command): ...this.
(_initialize_tracefile): Adjust to renames.
* tracepoint.c (trace_actions_command): Rename to...
(actions_command): ...this.
(trace_start_command): Rename to...
(tstart_command): ...this, and adjust to renames..
(trace_stop_command): Rename to...
(tstop_command): ...this.
(trace_status_command): Rename to...
(tstatus_command): ...this, and adjust to renames.
(trace_find_command): Rename to...
(tfind_command): ...this.
(trace_find_pc_command): Rename to...
(tfind_pc_command): ...this.
(trace_find_tracepoint_command): Rename to...
(tfind_tracepoint_command): ...this.
(trace_find_line_command): Rename to...
(tfind_line_command): ...this.
(trace_find_range_command): Rename to...
(tfind_range_command): ...this.
(trace_find_outside_command): Rename to...
(tfind_outside_command): ...this.
(trace_dump_command): Rename to...
(tdump_command): ...this.
(tfind_1): Adjust to renames.
(trace_find_end_command): Rename to...
(tfind_end_command): ...this, and adjust to renames..
(trace_status_mi): Adjust to renames.
(parse_trace_status): Adjust to renames.
(_initialize_tracepoint): Adjust to renames.
* tracepoint.h (enum trace_stop_reason) <tstop_command>: Rename
to...
<trace_stop_command>: ...this.
The suppress_output field of the mi_ui_out_data structure is never actually
set to 1/true. We can therefore remove it, and remove all the
if (suppress_output)
checks.
gdb/ChangeLog:
* mi/mi-out.c (mi_ui_out_data) <suppress_output>: Remove.
(mi_table_body): Remove suppress_output check.
(mi_table_end): Likewise.
(mi_table_header): Likewise.
(mi_begin): Likewise.
(mi_end): Likewise.
(mi_field_int): Likewise.
(mi_field_string): Likewise.
(mi_field_fmt): Likewise.
(mi_out_data_ctor): Likewise.
This patch teaches GDB AArch64 backend to recognize STR instructions
in prologue, like 'str x19, [sp, #-48]!' or 'str w0, [sp, #44]'.
The unit test is added too.
gdb:
2016-12-02 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_analyze_prologue): Recognize STR
instruction.
(aarch64_analyze_prologue_test): More tests.
We don't have an effective way to test prologue analyzer which is
highly dependent on instruction patterns in prologue generated by
compiler. GDB prologue analyzer may not handle the new sequences
generated by new compiler, or may still handle some sequences that
generated by very old compilers which are no longer used. The
former is a functionality issue, while the latter is a maintenance
issue.
The input and output of prologue analyzer is quite clear, so it
fits for unit test. The input is series of instructions, and the
output are 1) where prologue end, 2) where registers are saved.
In aarch64, they are represented in 'struct aarch64_prologue_cache'.
This patch refactors aarch64_analyze_prologue so it can read
instructions from either real target or test harness. In unit
test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets
instructions we prepared in the test, as the input of prologue
analyzer. Then, we checked various fields in
'struct aarch64_prologue_cache'.
gdb:
2016-12-02 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c: Include "selftest.h".
(abstract_instruction_reader): New class.
(instruction_reader): New class.
(aarch64_analyze_prologue): Add new parameter reader. Call
reader.read instead of read_memory_unsigned_integer.
[GDB_SELF_TEST] (instruction_reader_test): New class.
(aarch64_analyze_prologue_test): New function.
(_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register
selftests::aarch64_analyze_prologue_test.
* trad-frame.c (trad_frame_cache_zalloc):
(trad_frame_alloc_saved_regs): Add a new function.
* trad-frame.h (trad_frame_alloc_saved_regs): Declare.
This fixes a few cases where the testcase is explicitly handling timeouts
inside gdb_test_multiple when it is not necessary.
It also converts two gdb_test_multiple calls to gdb_test_no_output calls
(also removing the timeout handling).
gdb/testsuite/ChangeLog:
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/maint.exp: Remove timeout handling for gdb_test_multiple.
* gdb.cp/gdb2495.exp: Likewise and convert gdb_test_multiple into
gdb_test_no_output for a couple of cases.
* gdb.cp/ovldbreak.exp: Remove timeout handling for gdb_test_multiple.
This patch makes a class out of the ui_out_table structure, the
structure responsible for managing the generation of an UI table.
To simplify the ui_out_table object, I changed it so that it can only be
used for generating a single object. Instead of clearing the header
list when starting a new table, we an ui_out_table when starting a
table and delete it when we're done. Therefore, the checks:
if (uiout->table->flag)
if (!uiout->table->flag)
are respectively replaced with
if (uiout->table != nullptr)
if (uiout->table == nullptr)
Note: I removed the check at the beginning of ui_out_begin, because
there is an equivalent check at the beginning of verify_field.
New in v2:
- use "enum class" for ui_out_table::state and update references.
gdb/ChangeLog:
* ui-out.c (enum ui_out_table_state): Move to class
ui_out_table as ui_out_table::state.
(struct ui_out_table): Change to ...
(class ui_out_table): ... this.
<flag>: Remove.
<entry_level>: Rename to ...
<m_entry_level>: ... this.
<columns>: Rename to ...
<m_nr_cols>: ... this.
<id>: Rename to ...
<m_id>: ... this.
<headers>: Rename to ...
<m_headers>: ... this.
<headers_iterator>: Rename to ...
<m_headers_iterator>: ... this.
<start_body, append_header, start_row, get_next_header,
query_field, current_state, entry_level>: New methods.
(struct ui_out) <table>: Change type to unique_ptr to
ui_out_table.
(append_header_to_list, get_next_header, clear_header_list,
clear_table): Remove.
(ui_out_table_begin): Instantiate ui_out_table object. Update
table check.
(ui_out_table_body): Update table check, replace code with call
to ui_out_table::start_body.
(ui_out_table_end): Update table check, replace manual cleanup
with assignment of uiout->table unique_ptr to nullptr.
(ui_out_table_header): Update table check, replace call to
append_header_to_list with call to append_header method.
(ui_out_begin): Remove one table state check, update another.
Replace code with call to start_row method.
(verify_field): Update table checks.
(ui_out_query_field): Update table check, replace code with call
to query_field method.
(ui_out_new): Remove table initialization code.
This patch is just a little cleanup, it replaces the body_flag field of
ui_out_table with an enum. It expresses more explicitly the
intent of the field (check that state == TABLE_STATE_HEADERS conveys
more what we want to do than checking for !body_flag).
New in v2:
- Remove unnecessary ui_out_table_state::.
gdb/ChangeLog:
* ui-out.c (enum ui_out_table_state): New enum.
(struct ui_out_table) <body_flag>: Remove field.
<state>: New field.
(ui_out_table_begin): Replace usages of body_flag with state.
(ui_out_table_body): Likewise.
(ui_out_table_end): Likewise.
(ui_out_table_header): Likewise.
(ui_out_begin): Likewise.
(verify_field): Likewise.
(ui_out_new): Likewise.
Now that we use a vector to store the levels, we don't have to keep a
separate level field in ui_out to keep track of the current level. We
can efficiently derive it from the vector size. That causes a little
change in the meaning of the level, as in they are now 1-based instead
of 0-based (the initial level has the "id" 1 now), but it shouldn't
change anything in the behavior.
Additionally, push_level and pop_level don't really need to return the
new level, making them return void simplifies the code a bit.
Finally, the ui_out_begin/ui_out_end callbacks in the ui_out_impl
interface don't need to be passed the level, it's never actually used.
New in v2:
- Remove or update stale comments.
gdb/ChangeLog:
* ui-out.h (ui_out_begin_ftype): Remove level parameter.
(ui_out_end_ftype): Likewise.
* ui-out.c (struct ui_out) <level>: Replace field with a method
that dynamically computes the result.
(current_level): Get vector's back item instead of using
uiout->level.
(push_level): Make return type void.
(pop_level): Make return type void and update access to
ui_out::level.
(uo_begin): Remove level parameter.
(uo_end): Likewise.
(ui_out_table_begin): Update access to uiout::level.
(ui_out_begin): Don't read return value from push_level, call
uiout->level() instead, update call to uo_begin.
(ui_out_end): Don't read return value from pop_level, update
call to uo_end.
(verify_field): Update access to uiout->level.
(ui_out_new): Don't initialize ui_out::level, call push_level
to push the initial level instead of doing it by hand.
* cli-out.c (cli_begin): Remove level parameter.
(cli_end): Likewise.
* mi/mi-out.c (mi_begin): Likewise.
(mi_end): Likewise.
This patch changes struct ui_out_level to be a real C++ class. No
behavioral changes.
gdb/ChangeLog:
* ui-out.c (struct ui_out_level): Replace with ...
(class ui_out_level): ... this.
(current_level): Update.
(push_level): Update.
(pop_level): Update.
(verify_field): Update.
(ui_out_new): Update.
This patch makes ui_out_hdr (the object that represents an ui-out table
header) a proper C++ class. No behavior changes, it's all about
encapsulation.
gdb/ChangeLog:
* ui-out.c (struct ui_out_hdr): Replace with ...
(class ui_out_hdr): ... this.
(append_header_to_list): Update.
(get_next_header): Update.
(ui_out_query_field): Update.
Instead of keeping pointers to first, last and current ui_out_hdr in
ui_out_table, we can use an std::vector and an iterator. Direct random
access of to vector helps make get_next_header a bit nicer by avoiding
iterating on all the headers. append_header_to_list is also a bit
simpler.
Also, using unique_ptr inside the vector allows expressing the ownership
of the ui_out_hdr objects by the ui_out_table object, and it simplifies
the destruction.
gdb/ChangeLog:
* ui-out.c (struct ui_out_hdr) <next>: Remove.
(struct ui_out_table) <header_first, header_last, header_next>: Remove.
<headers, headers_iterator>: New fields.
(ui_out_table_body): Update for the new data structure.
(ui_out_begin): Likewise.
(clear_header_list): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(ui_out_query_field): Likewise.
(ui_out_new): Likewise.
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_multiple in a multi-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
* gdb.cp/gdb2495.exp: Replace gdb_test_multiple
with gdb_test_no_output.
Use command as test name.
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_no_output in a multi-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
Fix test names starting with uppercase throughout the files.
* gdb.ada/assign_1.exp
* gdb.ada/boolean_expr.exp
* gdb.base/arrayidx.exp
* gdb.base/del.exp
* gdb.base/gcore-buffer-overflow.exp
* gdb.base/testenv.exp
* gdb.compile/compile.exp
* gdb.python/py-framefilter-invalidarg.exp
* gdb.python/py-framefilter.exp
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_multiple in a single-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
Fix test names starting with uppercase throughout the files.
* gdb.arch/i386-bp_permanent.exp
* gdb.arch/i386-gnu-cfi.exp
* gdb.base/disasm-end-cu.exp
* gdb.base/macscp.exp
* gdb.base/pending.exp
* gdb.base/watch_thread_num.exp
* gdb.cp/exception.exp
* gdb.cp/gdb2495.exp
* gdb.cp/local.exp
* gdb.python/py-evsignal.exp
* gdb.python/python.exp
* gdb.trace/tracecmd.exp
Use std::string for the id field of the ui_out_table object.
I found that all users of ui_out_table_begin passed a non-NULL value to
the tblid parameter, so we don't have to worry about the NULL case. I
changed the tblid parameter to be a std::string while at it.
gdb/ChangeLog:
* ui-out.c (struct ui_out_table) <id>: Change type to
std::string.
(ui_out_table_begin): Change tblid parameter type to
std::string, adapt code.
update following type change.
(clear_table): Update.
(ui_out_new): Update.
Use a standard vector instead of the home-made version. I used a vector
of plain pointers, because the cli_ui_out_data object doesn't own the
streams objects (i.e. they shouldn't be deleted when the vector is
deleted).
gdb/ChangeLog:
* cli-out.h (cli_ui_out_data) <streams>: Change type to
std::vector.
* cli-out.c: Remove vec.h include.
(cli_uiout_dtor): Update.
(cli_field_fmt): Update.
(cli_spaces): Update.
(cli_text): Update.
(cli_message): Update.
(cli_flush): Update.
(cli_redirect): Update.
(out_field_fmt): Update.
(field_separator): Update.
(cli_out_data_ctor): Update.
(cli_out_new): Update.
(cli_out_set_stream): Update.
Use a standard vector instead of the home-made version. I used a vector
of plain pointers, because the mi_ui_out_data object doesn't own the
streams objects (i.e. they shouldn't be deleted when the vector is
deleted).
gdb/ChangeLog:
* mi/mi-out.c: Remove vec.h include.
(mi_ui_out_data) <streams>: Change type to std::vector.
(mi_field_string): Update.
(mi_field_fmt): Update.
(mi_flush): Update.
(mi_redirect): Update.
(field_separator): Update.
(mi_open): Update.
(mi_close): Update.
(mi_out_buffered): Update.
(mi_out_rewind): Update.
(mi_out_put): Update.
(mi_out_data_ctor): Update.
(mi_out_data_dtor): Don't free streams.
Convert the levels field of struct ui_out to be a vector of unique_ptr
to ui_out_level. This way, the ownership of the ui_out_level objects by
the ui_out instance is clear.
gdb/ChangeLog:
* ui-out.c (ui_out_level_p): Remove typedef.
(DEF_VEC_P (ui_out_level_p)): Remove definition.
(struct ui_out) <levels>: Change type to vector of unique_ptr of
ui_out_level.
(current_level): Update.
(push_level): Update.
(pop_level): Update, don't manually delete the ui_out_level
instance.
(ui_out_new): Update.
The following patches introduce C++ vectors and strings as fields of the
various ui_out structures. We therefore need to use new/delete so that
their contructor/destructor is called. I find it simpler to change all
the allocations in a separate preliminary patch, rather than in each
individual patch.
gdb/ChangeLog:
* cli-out.c (cli_uiout_dtor): Use delete instead of xfree.
(cli_out_new): Use new instead of XNEW.
* mi/mi-out.c (mi_out_data_dtor): Use delete instead of xfree.
(mi_out_new): Use new instead of XNEW.
* tui/tui-out.c (tui_out_new): Likewise.
* ui-out.c (push_level): Likewise.
(pop_level): Use delete instead of xfree.
(clear_header_list): Use delete instead of xfree.
(append_header_to_list): Use new instead of XNEW.
(ui_out_new): Likewise.
Since we don't use suffix rules nor implicit rules in gdb, we can
disable them. The advantage is a slightly faster make [1].
Here are some numbers about the speedup. I ran this on my trusty old
Intel Q6600, so the time numbers are probably higher than what you'd get
on any recent hardware. I ran "make" in the gdb/ directory of an
already built repository (configured with --enable-targets=all). I
recorded the time of execution (average of 5). I then ran "make -d" and
recorded the number of printed lines, which gives a rough idea of the
number of operations done.
I compared the following configurations, to see the impact of both the
empty .SUFFIXES target and the empty pattern rules, as well as running
"make -r", which can be considered the "ideal" case.
A - baseline
B - baseline + .SUFFIXES
C - baseline + pattern rules
D - baseline + .SUFFIXES + pattern rules
E - baseline + make -r
config | time (s) | "make -d"
-----------------------------
A | 5.74 | 2396643
B | 1.19 | 298469
C | 2.81 | 1266573
D | 1.13 | 245489
E | 1.01 | 163914
We can see that the empty .SUFFIXES target has a bigger impact than the
empty pattern rules, but still it doesn't hurt to disable the implicit
pattern rules as well.
There are still some mentions of implicit rules I can't get rid of in
the "make -d" output. For example, it's trying to build .c files from
.w files:
Looking for an implicit rule for '/home/simark/src/binutils-gdb/gdb/infrun.c'.
Trying pattern rule with stem 'infrun'.
Trying implicit prerequisite '/home/simark/src/binutils-gdb/gdb/infrun.w'.
and trying to build Makefile.in from a bunch of extensions:
Looking for an implicit rule for 'Makefile.in'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.o'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.c'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.cc'.
... many more ...
If somebody knows how to disable them, we can do it, but at this point
the returns are minimal, so it is not that important.
I verified that both in-tree and out-of-tree builds work.
[1] Switching from explicit rules to pattern rules for files in
subdirectories actually made it slower, so this is kind of a way to
redeem myself. But it the end it's faster than it was previously,
so it was all worth it. :)
gdb/ChangeLog:
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/ChangeLog:
* Makefile.in: Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
gdb/testsuite/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
When GDB read inferior memory as an address or an instruction,
it should be unsigned.
gdb:
2016-11-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_scan_prologue): Read memory as unsigned integer.
(arm_exidx_unwind_sniffer): Likewise.
With the previous change, value.location.address is only valid for
lval_memory. This patch restrict some checking on value.lval on
using address. Since we have a check on VALUE_VAL in
set_value_address, we need to set VALUE_VAL properly before
set_value_address too.
gdb:
2016-11-25 Yao Qi <yao.qi@linaro.org>
* ada-lang.c (ensure_lval): Call set_value_address after setting
VALUE_LVAL.
* elfread.c (elf_gnu_ifunc_resolve_addr): Set VALUE_LVAL to
lval_memory.
(elf_gnu_ifunc_resolver_return_stop): Likewise.
* value.c (value_fn_field): Likewise.
(value_from_contents_and_address_unresolved): Likewise.
(value_from_contents_and_address): Likewise.
(value_address): Check value->lval isn't
lval_memory.
(value_raw_address): Likewise.
(set_value_address): Assert value->lval is lval_memory.
value.regnum and value.next_frame_id are only used for lval_register,
so this patch moves them to union value.location. As a result, when
we copy value, only copy location, don't need to copy regnum and
next_frame_id.
This patch also changes regnum's type to int as there is no space
constraint, so update deprecated_value_regnum_hack return type too.
gdb:
2016-11-28 Yao Qi <yao.qi@linaro.org>
* valops.c (value_slice): Don't set frame id of slice.
* value.c (struct value) <regnum, next_frame_id>: Move them to...
(struct value) <location>: ... here. Update comments.
(allocate_value_lazy): Don't set frame id and regnum.
(deprecated_value_next_frame_id_hack): Adjust.
(deprecated_value_regnum_hack): Adjust.
(value_copy): Don't copy frame id and regnu.
(value_primitive_field): Likewise.
(value_from_component): Likewise.
(deprecated_value_regnum_hack): Return int *.
* value.h (deprecated_value_regnum_hack): Update declaration.
Nowadays, we set computed value's frame id, which is a misuse to me.
The computed value itself doesn't care about frame id, but function
value_computed_funcs (val)->read (or read_pieced_value) cares about
which frame the register is relative to, so 'struct piece_closure' is
a better place to fit frame id.
This patch adds a frame id in 'struct piece_closure', and use it
instead of using computed value's frame id.
gdb:
2016-11-28 Yao Qi <yao.qi@linaro.org>
* dwarf2loc.c (struct piece_closure) <frame_id>: New field.
(allocate_piece_closure): Add new parameter 'frame' and set
closure's frame_id field accordingly.
(read_pieced_value): Get frame from closure instead of value.
(dwarf2_evaluate_loc_desc_full): Remove code getting frame id.
Don't set value's frame id.
Constify the data path between ui_out_wrap_hint and the wrap_indent
global, because we can. It's clearer that the argument passed to
wrap_hint is not intended to be modified by the ui_out implementation.
gdb/ChangeLog:
* mi/mi-out.c (mi_wrap_hint): Constify argument.
* cli-out.c (cli_wrap_hint): Likewise.
* ui-out.c (ui_out_wrap_hint, uo_wrap_hint): Likewise.
* ui-out.h (ui_out_wrap_hint, wrap_hint_ftype): Likewise.
* utils.c (wrap_here): Likewise.
(wrap_indent): Constify.
* utils.h (wrap_here): Constify argument.
Thomas Schwinge
Simon Marchi
Yao Qi
Simon Marchi
Luis Machado
Pedro Alves
Tom Tromey