Skip processor-specific GNU program properties with generic ELF target
vector. They should be handled by the matching ELF target vector.
* elf-properties.c (_bfd_elf_parse_gnu_properties): Ignore
processor-specific properties with generic ELF target vector.
At the end of linux_nat_detach the main_lwp is deleted (delete_lwp).
This is problematic as during detach (detach_one_lwp and
linux_fork_detach) main_lwp already gets freed. Thus calling
delete_lwp causes a read after free. Fix it by removing the
unnecessary delete_lwp.
gdb/ChangeLog:
2017-04-11 Philipp Rudo <prudo@linux.vnet.ibm.com>
* linux-nat.c (linux_nat_detach): Remove delete_lwp call.
Don't use fixed size buffers for symbol names.
PR 21274
PR 18466
* emultempl/pe.em (pe_find_data_imports): Don't use fixed size
symbol buffer. Instead, xmalloc max size needed with space for
prefix. Wrap overlong lines. Formatting. Pass symbol buffer
copy of name to pe_walk_relocs_of_symbol.
(make_inport_fixup): Add "name" param, pass to pe_create_import_fixup.
* emultempl/pe.em (pep_find_data_imports): As for pe_find_data_imports.
(make_import_fixup): Add "name" param, pass to pep_create_import_fixup.
Use bfd_get_signed_* and remove unnecessary casts. Formatting.
* pe-dll.c (pe_walk_relocs_of_symbol): Add "name" param. Pass to
callback.
(make_import_fixup_mark): Add "name" param. Make use of prefix
space rather than xmalloc here.
(pe_create_import_fixup): Likewise.
* pe-dll.h (pe_walk_relocs_of_symbol): Update prototype.
(pe_create_import_fixup): Likewise.
* pep-dll.h (pep_walk_relocs_of_symbol): Likewise.
(pep_create_import_fixup): Likewise.
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
Pedro's recent commits enabling -Wwrite-strings has changed a bit the
logic of info_osdata. Now, 'type' is always non-NULL, so we have to
check if it's an empty string instead of NULL. One of the checks was
fixed, but there is another that was left behind. This commit fixes
it.
gdb/ChangeLog:
2017-04-10 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21364
* osdata.c (info_osdata): Check if 'type' is an empty string
instead of NULL.
I build GDB with asan, and run test case hook-stop.exp, and threadapply.exp,
I got the following asan error,
=================================================================^M
^[[1m^[[31m==2291==ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000999c4 at pc 0x000000826022 bp 0x7ffd28a8ff70 sp 0x7ffd28a8ff60^M
^[[1m^[[0m^[[1m^[[34mREAD of size 4 at 0x6160000999c4 thread T0^[[1m^[[0m^M
#0 0x826021 in release_stop_context_cleanup ../../binutils-gdb/gdb/infrun.c:8203^M
#1 0x72798a in do_my_cleanups ../../binutils-gdb/gdb/common/cleanups.c:154^M
#2 0x727a32 in do_cleanups(cleanup*) ../../binutils-gdb/gdb/common/cleanups.c:176^M
#3 0x826895 in normal_stop() ../../binutils-gdb/gdb/infrun.c:8381^M
#4 0x815208 in fetch_inferior_event(void*) ../../binutils-gdb/gdb/infrun.c:4011^M
#5 0x868aca in inferior_event_handler(inferior_event_type, void*) ../../binutils-gdb/gdb/inf-loop.c:44^M
....
^[[1m^[[32m0x6160000999c4 is located 68 bytes inside of 568-byte region [0x616000099980,0x616000099bb8)^M
^[[1m^[[0m^[[1m^[[35mfreed by thread T0 here:^[[1m^[[0m^M
#0 0x7fb0bc1312ca in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x982ca)^M
#1 0xb8c62f in xfree(void*) ../../binutils-gdb/gdb/common/common-utils.c:100^M
#2 0x83df67 in free_thread ../../binutils-gdb/gdb/thread.c:207^M
#3 0x83dfd2 in init_thread_list() ../../binutils-gdb/gdb/thread.c:223^M
#4 0x805494 in kill_command ../../binutils-gdb/gdb/infcmd.c:2595^M
....
Detaching from program: /home/yao.qi/SourceCode/gnu/build-with-asan/gdb/testsuite/outputs/gdb.threads/threadapply/threadapply, process 2399^M
=================================================================^M
^[[1m^[[31m==2387==ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000a98c0 at pc 0x00000083fd28 bp 0x7ffd401c3110 sp 0x7ffd401c3100^M
^[[1m^[[0m^[[1m^[[34mREAD of size 4 at 0x6160000a98c0 thread T0^[[1m^[[0m^M
#0 0x83fd27 in thread_alive ../../binutils-gdb/gdb/thread.c:741^M
#1 0x844277 in thread_apply_all_command ../../binutils-gdb/gdb/thread.c:1804^M
....
^M
^[[1m^[[32m0x6160000a98c0 is located 64 bytes inside of 568-byte region [0x6160000a9880,0x6160000a9ab8)^M
^[[1m^[[0m^[[1m^[[35mfreed by thread T0 here:^[[1m^[[0m^M
#0 0x7f59a7e322ca in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x982ca)^M
#1 0xb8c62f in xfree(void*) ../../binutils-gdb/gdb/common/common-utils.c:100^M
#2 0x83df67 in free_thread ../../binutils-gdb/gdb/thread.c:207^M
#3 0x83dfd2 in init_thread_list() ../../binutils-gdb/gdb/thread.c:223^M
This patch fixes the issue by deleting thread_info object if it is
deletable, otherwise, mark it as exited (by set_thread_exited).
Function set_thread_exited is shared from delete_thread_1. This patch
also moves field "refcount" to private and methods incref and
decref. Additionally, we stop using "ptid_t" in
"struct current_thread_cleanup" to reference threads, instead we use
"thread_info" directly. Due to this change, we don't need
restore_current_thread_ptid_changed anymore.
gdb:
2017-04-10 Yao Qi <yao.qi@linaro.org>
PR gdb/19942
* gdbthread.h (thread_info::deletable): New method.
(thread_info::incref): New method.
(thread_info::decref): New method.
(thread_info::refcount): Move it to private.
* infrun.c (save_stop_context): Call inc_refcount.
(release_stop_context_cleanup): Likewise.
* thread.c (set_thread_exited): New function.
(init_thread_list): Delete "tp" only it is deletable, otherwise
call set_thread_exited.
(delete_thread_1): Call set_thread_exited.
(current_thread_cleanup) <inferior_pid>: Remove.
<thread>: New field.
(restore_current_thread_ptid_changed): Removed.
(do_restore_current_thread_cleanup): Adjust.
(restore_current_thread_cleanup_dtor): Don't call
find_thread_ptid.
(set_thread_refcount): Use dec_refcount.
(make_cleanup_restore_current_thread): Adjust.
(thread_apply_all_command): Call inc_refcount.
(_initialize_thread): Don't call
observer_attach_thread_ptid_changed.
This patch hoists code on marking thread as exited, so more code is shared
for two different paths (thread_info is deleted or is not deleted).
gdb:
2017-04-10 Yao Qi <yao.qi@linaro.org>
* thread.c (delete_thread_1): Hoist code on marking thread as
exited.
* config/tc-xtensa.c (xtensa_maybe_create_literal_pool_frag):
Initialize lps->frag_count with auto_litpool_limit.
(xg_promote_candidate_litpool): New function.
(xtensa_move_literals): Extract candidate litpool promotion code
into separate function. Call it for all possible found
candidates.
(xtensa_switch_to_literal_fragment): Drop 'recursive' flag and
call to xtensa_mark_literal_pool_location that it guards.
Replace it with call to xtensa_maybe_create_literal_pool_frag.
Initialize pool_location with created literal pool candidate.
* testsuite/gas/xtensa/all.exp: Add new tests.
* testsuite/gas/xtensa/auto-litpools-first1.d: New test results.
* testsuite/gas/xtensa/auto-litpools-first1.s: New test.
* testsuite/gas/xtensa/auto-litpools-first2.d: New test results.
* testsuite/gas/xtensa/auto-litpools-first2.s: New test.
* testsuite/gas/xtensa/auto-litpools.d: Fix offsets changed due
to additional jump instruction.
* elf32-sparc.c (elf_backend_fixup_symbol): New.
* elf64-sparc.c (elf_backend_fixup_symbol): New.
* elfxx-sparc.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New.
(_bfd_sparc_elf_link_hash_entry): Add has_got_reloc and
has_non_got_reloc.
(link_hash_newfunc): Initialize has_got_reloc and
has_non_got_reloc.
(_bfd_sparc_elf_size_dynamic_sections): Set interp to .interp
section.
(_bfd_sparc_elf_copy_indirect_symbol): Copy has_got_reloc and
has_non_got_reloc.
(_bfd_sparc_elf_check_relocs): Set has_got_reloc and
has_non_got_reloc.
(_bfd_sparc_elf_fixup_symbol): New function.
(allocate_dynrelocs): Don't allocate space for dynamic
relocations and discard relocations against resolved undefined
weak symbols in executable. Don't make resolved undefined weak
symbols in executable dynamic. Keep dynamic non-GOT/non-PLT
relocation against undefined weak symbols in PIE.
(_bfd_sparc_elf_relocate_section): Don't generate dynamic
relocations against resolved undefined weak symbols in PIE
(_bfd_sparc_elf_finish_dynamic_symbol): Keep PLT/GOT entries
without ynamic PLT/GOT relocations for resolved undefined weak
symbols.
Don't generate dynamic relocation against resolved undefined
weak symbol in executable.
(pie_finish_undefweak_symbol): New function.
(_bfd_sparc_elf_finish_dynamic_sections): Call
pie_finish_undefweak_symbol on all symbols in PIE.
* elfxx-sparc.h (_bfd_sparc_elf_link_hash_table): Add interp.
(_bfd_sparc_elf_fixup_symbol): New function.
PPC_OPCODE_440 being set for ppc476 meant that many opcodes needed to
be deprecated for ppc476. There are far fewer to add specially for
ppc476 if PPC_OPCODE_440 is not set for ppc476.
* ppc-dis.c (ppc_opts <476>): Remove PPC_OPCODE_440.
* ppc-opc.c (MULHW): Add PPC_OPCODE_476.
(powerpc_opcodes): Adjust PPC440, PPC464 and PPC476 insns to suit
removal of PPC_OPCODE_440 from ppc476 cpu selection bits.
PR21287 notes that .init_array is correctly given a type of
SHT_INIT_ARRAY while .init_array.nnn gets SHT_PROGBITS. This patch
fixes that problem, and properly drops warnings from the compiler that
would cause the testsuite to fail. My a44d0bd78 change to check
ld_compile status, necessary to pick up compile errors, also meant
warnings were not ignored.
bfd/
PR 21287
* elf.c (special_sections_f): Match .fini_array and .fini_array.*.
(special_sections_i): Likewise for .init_array.
(special_sections_p): Likewise for .preinit_array.
ld/
PR 21287
* testsuite/ld-elf/init-fini-arrays.d: Match INIT_ARRAY and FINI_ARRAY.
* testsuite/ld-elf/init-fini-arrays.s: Use %init_array and %fini_array
section types.
* testsuite/lib/ld-lib.exp (default_ld_compile): Trim assembler
warnings about "ignoring incorrect section type".
(run_ld_link_exec_tests, run_cc_link_tests): Delete old comment.
My mips-linux and mips64-linux testsuite runs have been failing a
bunch of visibility tests, seemingly randomly. It turns out the
problem occurs when object files are left over in ld/tmpdir from a
previous run.
* testsuite/ld-elfvsb/elfvsb.exp (visibility_run): Delete
sh1p.o, sh2p.o, sh1np.o and sh2np.o before compiling. Use
remote_file host exists rather than file exists.
When trying to build for x86_64-w64-mingw32:
/home/simark/src/binutils-gdb/gdb/windows-nat.c: In function ‘void windows_detach(target_ops*, const char*, int)’:
/home/simark/src/binutils-gdb/gdb/windows-nat.c:1915:20: error: converting to ‘ptid_t’ from initializer list would use explicit constructor ‘constexpr ptid_t::ptid_t(int, long int, long int)’
ptid_t ptid = {-1};
^
Fixed by initializing ptid with the minus_one_ptid variable.
gdb/ChangeLog:
* windows-nat.c (windows_detach): Initialize ptid with
minus_one_ptid.
Since not all compilers support -no-pie, NOPIE_CFLAGS and NOPIE_LDFLAGS
should be used to disable PIE.
PR ld/21090
* testsuite/ld-x86-64/x86-64.exp (undefined_weak): Use
NOPIE_CFLAGS and NOPIE_LDFLAGS to disable PIE for the non-pie
version of the test.
Since common symbols that are turned into definitions don't have the
DEF_REGULAR flag set, we need to check ELF_COMMON_DEF_P for common
symbols.
bfd/
PR ld/19579
PR ld/21306
* elf32-s390.c (elf_s390_finish_dynamic_symbol): Check
ELF_COMMON_DEF_P for common symbols.
* elf64-s390.c (elf_s390_finish_dynamic_symbol): Likewise.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
* elflink.c (_bfd_elf_merge_symbol): Revert commits
202ac193bb and
07492f668d.
ld/
PR ld/19579
PR ld/21306
* testsuite/ld-elf/pr19579a.c (main): Updated.
* opncls.c (bfd_get_debug_link_info): Rename to...
(bfd_get_debug_link_info_1): ... this. Change type of second
parameter to void pointer. Adjust.
(bfd_get_debug_link_info): Reimplement on top of
bfd_get_debug_link_info_1.
(separate_debug_file_exists, separate_alt_debug_file_exists):
Change type of second parameter to void pointer. Adjust.
(get_func_type, check_func_type): Change type of second parameter
to void pointer.
(find_separate_debug_file): Add 'func_data' parameter. Pass it to
the callback functions instead of passing the address of a local.
(bfd_follow_gnu_debuglink): Pass address of unsigned long local to
find_separate_debug_file.
(get_alt_debug_link_info_shim): Change type of second parameter to
void pointer. Adjust.
(bfd_follow_gnu_debugaltlink): Adjust to pass NULL to
find_separate_debug_file.
(get_build_id_name, bfd_boolean check_build_id_file): Change type
of second parameter to void pointer. Adjust.
(bfd_follow_build_id_debuglink): Pass address of bfd_build_id
pointer local to find_separate_debug_file.
bfd/
* coffgen.c (_bfd_coff_gc_mark_hook): Handle PE weak
external symbols with a definition.
(_bfd_coff_gc_mark_extra_sections): Fix typo.
ld/
* testsuite/ld-pe/pe.exp: New test.
* testsuite/ld-pe/weakdef-1.s: New test source.
* testsuite/ld-pe/weakdef-1.d: New test.
I grew a bit tired of using ptid_get_{lwp,pid,tid} and friends, so I decided to
make it a bit easier to use by making it a proper class. The fields are now
private, so it's not possible to change a ptid_t field by mistake.
The new methods of ptid_t map to existing functions/practice like this:
ptid_t (pid, lwp, tid) -> ptid_build (pid, lwp, tid)
ptid_t (pid) -> pid_to_ptid (pid)
ptid.is_pid () -> ptid_is_pid (ptid)
ptid == other -> ptid_equal (ptid, other)
ptid != other -> !ptid_equal (ptid, other)
ptid.pid () -> ptid_get_pid (ptid)
ptid.lwp_p () -> ptid_lwp_p (ptid)
ptid.lwp () -> ptid_get_lwp (ptid)
ptid.tid_p () -> ptid_tid_p (ptid)
ptid.tid () -> ptid_get_tid (ptid)
ptid.matches (filter) -> ptid_match (ptid, filter)
I've replaced the implementation of the existing functions with calls to
the new methods. People are encouraged to gradually switch to using the
ptid_t methods instead of the functions (or we can change them all in
one pass eventually).
Also, I'm not sure if it's worth it (because of ptid_t's relatively
small size), but I have made the functions and methods take ptid_t
arguments by const reference instead of by value.
gdb/ChangeLog:
* common/ptid.h (struct ptid): Change to...
(class ptid_t): ... this.
<ptid_t>: New constructors.
<pid, lwp_p, lwp, tid_p, tid, is_pid, operator==, operator!=,
matches>: New methods.
<make_null, make_minus_one>: New static methods.
<pid>: Rename to...
<m_pid>: ...this.
<lwp>: Rename to...
<m_lwp>: ...this.
<tid>: Rename to...
<m_tid>: ...this.
(ptid_build, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal,
ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match): Take ptid arguments
as references, move comment to class ptid_t.
* common/ptid.c (null_ptid, minus_one_ptid): Initialize with
ptid_t static methods.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_tid,
ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match):
Take ptid arguments as references, implement using ptid_t methods.
* unittests/ptid-selftests.c: New file.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/ptid-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add unittests/ptid-selftests.o.
gdb/gdbserver/ChangeLog:
* server.c (handle_v_cont): Initialize thread_resume::thread
with null_ptid.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
GDB fails to build for Windows host with Python 2 support enabled due
to PyFile_FromString's second argument being of type char * and being
passed a (const) string literal. This parameter is input only so this
commit fixes the issue by casting to char *.
2017-04-06 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/
* python/python.c (python_run_simple_file): Cast mode literal to
non-const char pointer as expected by PyFile_FromString.
On powerpc-linux, the second PT_LOAD header is RWE. On hppa64-linux,
only one PT_LOAD header is present. Since the tests are really about
the new GNU_MBIND headers, ignore PT_LOAD and its section mapping.
* testsuite/ld-elf/mbind1a.d: Remove matches for PT_LOAD segments.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
objcopy/
* objcopy.c (struct redefine_node): Delete the field "next".
(redefine_sym_list): Deleted.
(redefine_specific_htab): New hash table.
(redefine_specific_reverse_htab): Likewise.
(eq_string_redefnode): New function.
(htab_hash_redefnode): Likewise.
(create_symbol2redef_htab): Likewise.
(add_specific_symbol_node): Likewise.
(create_symbol_htabs): Create redefine_specific_htab and
redefine_specific_reverse_htab.
(lookup_sym_redefinition): Use hash table instead of list.
(redefine_list_append): Likewise, and rename to add_redefine_and_check.
(copy_main): Use redefine_specific_htab instead of redefine_sym_list.
Update comments.
H.J. Lu
Pedro Alves
Philipp Rudo
Alan Hayward
Alan Modra
GDB Administrator
Sergio Durigan Junior
John Delsignor
Nick Clifton
Yao Qi
Max Filippov
Qing Zhao
Pip Cet
Simon Marchi
Jim Wilson
Simon Marchi
Tristan Gingold
Thomas Preud'homme
Jiong Wang
Hans-Peter Nilsson