GDB's core signal handling suffers from a classical signal handler /
mainline code race:
int
gdb_do_one_event (void)
{
...
/* First let's see if there are any asynchronous signal handlers
that are ready. These would be the result of invoking any of the
signal handlers. */
if (invoke_async_signal_handlers ())
return 1;
...
/* Block waiting for a new event. (...). */
if (gdb_wait_for_event (1) < 0)
return -1;
...
}
If a signal is delivered while gdb is blocked in the poll/select
inside gdb_wait_for_event, then the select/poll breaks with EINTR,
we'll loop back around and call invoke_async_signal_handlers.
However, if the signal handler runs between
invoke_async_signal_handlers and gdb_wait_for_event,
gdb_wait_for_event will block, until the next unrelated event...
The fix is to a struct serial_event, and register it in the set of
files that select/poll in gdb_wait_for_event waits on. The signal
handlers that defer work to invoke_async_signal_handlers call
mark_async_signal_handler, which is adjusted to also set the new
serial event in addition to setting a flag, and is thus now is
garanteed to immediately unblock the next gdb_select/poll call, up
until invoke_async_signal_handlers is called and the event is cleared.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* event-loop.c: Include "ser-event.h".
(async_signal_handlers_serial_event): New global.
(async_signals_handler, initialize_async_signal_handlers): New
functions.
(mark_async_signal_handler): Set
async_signal_handlers_serial_event.
(invoke_async_signal_handlers): Clear
async_signal_handlers_serial_event.
* event-top.c (async_init_signals): Call
initialize_async_signal_handlers.
This patch adds a new "event" struct serial type, that is an
abstraction specifically for waking up blocking waits/selects,
implemented on top of a pipe on POSIX, and on top of a native Windows
event (CreateEvent, etc.) on Windows.
This will be used to plug signal handler / mainline code races.
For example, GDB can indefinitely delay handling a quit request if the
user presses Ctrl-C between the last QUIT call and the next (blocking)
gdb_select call in the event loop:
QUIT;
<<< press ctrl-c here and end up blocked in gdb_select
indefinitely.
gdb_select (...); // whoops, SIGINT was already handled, no EINTR.
A global alone (either the quit flag, or the "ready" flag of the async
signal handlers in the event loop) is not sufficient.
To plug races such as these on POSIX systems, we have to register some
waitable file descriptor in the set of files gdb_select waits on, and
write to it from the signal handler. This is classically a pipe, and
the pattern called the self-pipe trick. On Linux, it could be a more
efficient eventfd instead, but I'm sticking with a pipe for
simplifity, as we need it for portability anyway.
(Alternatively, we could use pselect/ppoll, and block signals until
the pselect. The latter is not a design I think GDB could use,
because we want the QUIT macro to be super cheap, as it is used in
loops. Plus, Windows.)
This is a "struct serial" because Windows's gdb_select relies on that.
Windows's gdb_select, our "select" replacement, knows how to wait on
all kinds of handles (regular files, pipes, sockets, console, etc.)
unlike the native Windows "select" function, which can only wait on
sockets. Each file descriptor for a "serial" type that is not
normally waitable with WaitForMultipleObjects must have a
corresponding struct serial instance. gdb_select then internally
looks up the struct serial instance that wraps each file descriptor,
and asks it for the corresponding Windows waitable handle.
We could use serial_pipe() to create a "struct serial"-wrapped pipe
that is usable everywhere, including Windows. That's what currently
python/python.c uses for cross-thread posting of events.
However, serial_write and serial_readchar are not designed to be
async-signal-safe on POSIX hosts. It's easier to bypass those when
setting/clearing the event source.
And writing and a serial pipe is a bit heavy weight on Windows.
gdb_select requires an extra thread to wait on the pipe and several
Windows events, when a single manual-reset Windows event, with no
extra thread is sufficient.
The intended usage is simply:
- Call make_serial_event to create a serial event object.
- From the signal handler call serial_event_set to set the event.
- From mainline code, have select/poll wait for serial_event_fd(), in
addition to whatever other files you're about to wait for.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add ser-event.c.
(HFILES_NO_SRCDIR): Add ser-event.h.
(COMMON_OBS): Add ser-event.o.
* ser-event.c, ser-event.h: New files.
* serial.c (new_serial): New function, factored out from
(serial_fdopen_ops): ... this.
(serial_open_ops_1): New function, factored out from
(serial_open): ... this.
(serial_open_ops): New function.
* serial.h (struct serial): Forware declare.
(serial_open_ops): New declaration.
Not used by anything.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* serial.c (serial_open, serial_fdopen_ops, do_serial_close):
Remove references to name.
* serial.h (struct serial) <name>: Delete.
This code installs a custom signal handler that throws a quit
exception if remote_fio_no_longjmp is not set.
AFAICS, the only real reason for this might have been to unblock the
ui_file_read call, in remote_fileio_func_read. But ever since:
2009-11-13 Daniel Jacobowitz <dan@codesourcery.com>
* ui-file.c (stdio_file_read): Call gdb_select before read.
at:
https://sourceware.org/ml/gdb-patches/2009-11/msg00321.html
that call is interruptible.
This is not only useful for switching to native C++ exceptions, but
AFAICS, also fixes a potential mess up of the remote protocol
connection, since there are target_read_memory calls done while
remote_fio_no_longjmp is clear. If the user presses ctrl-c while GDB
is sending or receiving a packet, we'll stop the communication
immediately, at a point where it isn't safe.
gdbserver doesn't support the File I/O remote protocol extension so I
can't test this.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
Delete.
(async_remote_fileio_interrupt): Delete.
(remote_fileio_ctrl_c_signal_handler): Don't call the async signal
handler. Instead just always set the ctrl_c flag.
(remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
re-enabling the SIGINT handler.
(remote_fileio_func_open, remote_fileio_func_close)
(remote_fileio_func_read, remote_fileio_func_write)
(remote_fileio_func_lseek, remote_fileio_func_rename)
(remote_fileio_func_unlink, remote_fileio_func_stat)
(remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
(remote_fileio_func_isatty, remote_fileio_func_system)
(remote_fileio_request): Remove references to
remote_fio_no_longjmp.
(initialize_remote_fileio): Don't create an async signal handler.
immediate_quit used to be necessary back when prompt_for_continue used
blocking fread, but nowadays it uses gdb_readline_wrapper, which is
implemented in terms of a nested event loop, which already knows how
to react to SIGINT:
#0 throw_it (reason=RETURN_QUIT, error=GDB_NO_ERROR, fmt=0x9d6d7e "Quit", ap=0x7fffffffcb88)
at .../src/gdb/common/common-exceptions.c:324
#1 0x00000000007bab5d in throw_vquit (fmt=0x9d6d7e "Quit", ap=0x7fffffffcb88) at .../src/gdb/common/common-exceptions.c:366
#2 0x00000000007bac9f in throw_quit (fmt=0x9d6d7e "Quit") at .../src/gdb/common/common-exceptions.c:385
#3 0x0000000000773a2d in quit () at .../src/gdb/utils.c:1039
#4 0x000000000065d81b in async_request_quit (arg=0x0) at .../src/gdb/event-top.c:893
#5 0x000000000065c27b in invoke_async_signal_handlers () at .../src/gdb/event-loop.c:949
#6 0x000000000065aeef in gdb_do_one_event () at .../src/gdb/event-loop.c:280
#7 0x0000000000770838 in gdb_readline_wrapper (prompt=0x7fffffffcd40 "---Type <return> to continue, or q <return> to quit---")
at .../src/gdb/top.c:873
The need for the QUIT in stdin_event_handler is then exposed by the
gdb.base/double-prompt-target-event-error.exp test, which has:
# We're now stopped in a pagination query while handling a
# target event (printing where the program stopped). Quitting
# the pagination should result in only one prompt being
# output.
send_gdb "\003p 1\n"
Without that change we'd get:
Continuing.
---Type <return> to continue, or q <return> to quit---PASS: gdb.base/double-prompt-target-event-error.exp: ctrlc target event: continue: continue to pagination
^CpQuit
(gdb) 1
Undefined command: "1". Try "help".
(gdb) PASS: gdb.base/double-prompt-target-event-error.exp: ctrlc target event: continue: first prompt
ERROR: Undefined command "".
UNRESOLVED: gdb.base/double-prompt-target-event-error.exp: ctrlc target event: continue: no double prompt
Vs:
Continuing.
---Type <return> to continue, or q <return> to quit---PASS: gdb.base/double-prompt-target-event-error.exp: ctrlc target event: continue: continue to pagination
^CQuit
(gdb) p 1
$1 = 1
(gdb) PASS: gdb.base/double-prompt-target-event-error.exp: ctrlc target event: continue: first prompt
PASS: gdb.base/double-prompt-target-event-error.exp: ctrlc target event: continue: no double prompt
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* event-top.c (stdin_event_handler): Call QUIT;
(prompt_for_continue): Don't run with immediate_quit set.
As can be seen in the tui_redisplay_readline comment:
"The command could call prompt_for_continue and we must not restore
SingleKey so that the prompt and normal keymap are used."
immediate_quit is being used as proxy for "secondary prompt".
We have a better predicate nowadays, so use it.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_redisplay_readline): Check
gdb_in_secondary_prompt_p instead of immediate_quit.
* tui/tui.c: Include top.h.
(tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
immediate_quit.
read_command_line is the only caller, and here we can assume we're
reading a regular file, not stdin.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* top.c (read_command_file): Inline command_loop here.
(command_loop): Delete.
AFAICS, immediate_quit was only needed here nowdays to be able to
interrupt gdb_readline_no_editing.
command_line_input can also take the gdb_readline_wrapper path, but
since that is built on top of the event loop (gdb_select / poll and
asynchronous signal handlers), it can be interrupted.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* top.c: Include "gdb_select.h".
(gdb_readline_no_editing): Wait for input with gdb_select instead
of blocking in fgetc.
(command_line_input): Don't set immediate_quit.
We shouldn't issue an error for read-only segment with dynamic IFUNC
relocations when dynamic relocations are against normal symbols.
bfd/
PR ld/19939
* elf-bfd.h (_bfd_elf_allocate_ifunc_dyn_relocs): Add a pointer
to bfd_boolean.
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Updated.
Set *readonly_dynrelocs_against_ifunc_p to TRUE if dynamic reloc
applies to read-only section.
* elf32-i386.c (elf_i386_link_hash_table): Add
readonly_dynrelocs_against_ifunc.
(elf_i386_allocate_dynrelocs): Updated.
(elf_i386_size_dynamic_sections): Issue an error for read-only
segment with dynamic IFUNC relocations only if
readonly_dynrelocs_against_ifunc is TRUE.
* elf64-x86-64.c (elf_x86_64_link_hash_table): Add
readonly_dynrelocs_against_ifunc.
(elf_x86_64_allocate_dynrelocs): Updated.
(elf_x86_64_size_dynamic_sections): Issue an error for read-only
segment with dynamic IFUNC relocations only if
readonly_dynrelocs_against_ifunc is TRUE.
* elfnn-aarch64.c (elfNN_aarch64_allocate_ifunc_dynrelocs):
Updated.
ld/
PR ld/19939
* testsuite/ld-i386/i386.exp: Run PR ld/19939 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19939.s: New file.
* testsuite/ld-i386/pr19939a.d: Likewise.
* testsuite/ld-i386/pr19939b.d: Likewise.
* testsuite/ld-x86-64/pr19939.s: Likewise.
* testsuite/ld-x86-64/pr19939a.d: Likewise.
* testsuite/ld-x86-64/pr19939b.d: Likewise.
sim/sh/
* interp.c (dmul): Split into dmul_s and dmul_u. Use explicit integer
width types and simplify implementation.
* gencode.c (dmuls.l, dmulu.l): Use new functions dmul_s and dmul_u.
gas/
* config/tc-mips.c (s_option): Sanitize `.option picX'
pseudo-op.
* testsuite/gas/mips/option-pic-1.d: New test.
* testsuite/gas/mips/option-pic-2.l: New list test.
* testsuite/gas/mips/option-pic-1.s: New test source.
* testsuite/gas/mips/option-pic-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
gas/
* config/tc-mips.c (s_option): Reject `.option picX' if VxWorks
PIC.
* testsuite/gas/mips/option-pic-vxworks-1.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-2.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-1.s: New test source.
* testsuite/gas/mips/option-pic-vxworks-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
There are a few small changes needed to make it work with a real remote
target.
- Remove the [is_remote target] check.
- Remove soname setting when building the lib, it's done by default now
anyway.
- In the compilation of the executable, pass the shared lib using the
shlib option, so that RPATH is set.
- Download the program to the target using gdb_remote_download, and
record the remote path. Remove loading of the program using
gdb_load_shlibs, which was not really appropriate anyway.
- Run the remote path through readlink (see comment in the code).
- Start gdbserver with the remote path.
Also, don't set executable and objfile variables, as they are unused.
Tested with native, native-gdbserver, native-extended-gdbserver, and a
remote gdbserver.
gdb/testsuite/ChangeLog:
* gdb.server/solib-list.exp: Remove is_remote check.
Pass shlib= to gdb_compile. Don't link shared library with
-soname. Call gdb_remote_download instead of gdb_load_shlibs.
Run binary filename through "readlink -f" on the target.
Commit 7817ea4614 (Improve gdb_remote_download, remove gdb_download)
caused:
FAIL: gdb.server/solib-list.exp: non-stop 0: target extended-remote (timeout)
FAIL: gdb.server/solib-list.exp: non-stop 0: continue (the program is no longer running)
FAIL: gdb.server/solib-list.exp: non-stop 0: p libvar
FAIL: gdb.server/solib-list.exp: non-stop 1: target extended-remote (timeout)
FAIL: gdb.server/solib-list.exp: non-stop 1: continue (the program is no longer running)
FAIL: gdb.server/solib-list.exp: non-stop 1: p libvar
gdb.log shows:
system interpreter is: /lib64/ld-linux-x86-64.so.2
...
spawn ../gdbserver/gdbserver --once :2347 /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2 /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/solib-list
Process /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2 created; pid = 18637
Cannot exec /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2: No such file or directory.
...
The test copied the interpreter to the outputs directory, however
ld-linux-x86-64.so.2 is a relative symlink that when copied points
nowhere:
$ ls -l testsuite/outputs/gdb.server/solib-list/
total 52
-rwxrwxr-x. 1 pedro pedro 13450 Apr 7 10:52 gdb.log
-rw-rw-r--. 1 pedro pedro 1512 Apr 7 10:52 gdb.sum
lrwxrwxrwx. 1 pedro pedro 10 Apr 7 11:39 ld-linux-x86-64.so.2 -> ld-2.22.so
-rwxrwxr-x. 1 pedro pedro 9464 Apr 7 11:39 solib-list
-rw-rw-r--. 1 pedro pedro 3472 Apr 7 11:39 solib-list-lib.c.o
-rw-rw-r--. 1 pedro pedro 2760 Apr 7 11:39 solib-list.o
-rwxrwxr-x. 1 pedro pedro 9232 Apr 7 11:39 solib-list.so
The copying comes from gdbserver_spawn ->
gdbserver_download_current_prog -> gdb_remote_download.
There's actually no need to download the interpreter to the target -
it's part of the target system/environment. So fix this by making the
test just not use gdb_load (and gdb_file_cmd as consequence) at all,
and instead pass the interpreter filename to gdbserver as an argument.
gdb/testsuite/ChangeLog:
2016-04-08 Pedro Alves <palves@redhat.com>
* gdb.server/solib-list.exp: Don't use gdb_load. Instead pass the
interpreter filename as argument to gdbserver_spawn.
* lib/gdbserver-support.exp (gdbserver_download_current_prog):
Return empty if $last_loaded_file does not exist.
I did a quick pass over value.c and value.h and made some of the accessor methods'
pass-by-reference parameters const-correct. Besides the obvious benefits, this is
required if we want to use them on values that are already declared as const
(such as the parameters to lval_funcs).
There's probably a lot more stuff that can be made const, here and elsewhere.
gdb/ChangeLog:
2016-04-08 Martin Galvan <martin.galvan@tallertechnologies.com>
* value.c (value_next): Make pass-by-reference parameters const-correct.
(value_parent): Likewise.
(value_enclosing_type): Likewise.
(value_lazy): Likewise.
(value_stack): Likewise.
(value_embedded_offset): Likewise.
(value_pointed_to_offset): Likewise.
(value_raw_address): Likewise.
(deprecated_value_modifiable): Likewise.
(value_free_to_mark): Likewise.
(value_release_to_mark): Likewise.
(internalvar_name): Likewise.
(readjust_indirect_value_type): Likewise.
(value_initialized): Likewise.
* value.h (value_next): Likewise.
(value_parent): Likewise.
(value_enclosing_type): Likewise.
(value_lazy): Likewise.
(value_stack): Likewise.
(value_embedded_offset): Likewise.
(value_pointed_to_offset): Likewise.
(value_raw_address): Likewise.
(deprecated_value_modifiable): Likewise.
(value_free_to_mark): Likewise.
(value_release_to_mark): Likewise.
(internalvar_name): Likewise.
(readjust_indirect_value_type): Likewise.
(value_initialized): Likewise.
on CentOS-7.2 I get
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit.exp ...
FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach (the program is no longer running)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit-so.exp ...
FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
since:
85af34ee0211eedf8d30a5c44dfc59dddf8b512a is the first bad commit
commit 85af34ee0211eedf8d30a5c44dfc59dddf8b512a
Author: Pedro Alves <palves@redhat.com>
Date: Thu Mar 31 19:28:47 2016 +0100
Add regression test for PR gdb/19858 (JIT code registration on attach)
The compiled code's .debug_line is wrong (for the simplistic approach of GDB
to put a breakpoint on the first address belonging to that source line) and so
GDB misses the breakpoint at the last line:
WAIT_FOR_GDB; return 0; /* gdb break here 2 */
Most of the patch is just about reindentation, no changes there.
gdb/testsuite/ChangeLog
2016-04-08 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compatibility with gcc-4.8.5-4.el7.x86_64.
* gdb.base/jit-main.c: Use exit after usage.
* ldlang.c (print_output_section_statement): Show minfo size
in target machine address units.
(print_reloc_statement): Likewise.
(print_padding_statement): Likewise.
(print_data_statement): Likewise. Ensure minimum print_dot
increment of one address unit.
$ GDBHISTFILE=/tmp/gdbhistfile runtest gdb.base/gdbhistsize-history.exp gdb.base/gdbinit-history.exp
Running ./gdb.base/gdbinit-history.exp ...
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=1000: show commands
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=foo: show commands
Running ./gdb.base/gdbhistsize-history.exp ...
FAIL: gdb.base/gdbhistsize-history.exp: histsize=: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=20: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize= 20 : show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=not_an_integer: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=10zab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5ab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=99999999999999999999999999999999999: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=50: show commands
This happens for my setup due to my:
$ grep GDB ~/.bashrc
export GDBHISTFILE="$HOME/.gdb_history"
gdb/testsuite/ChangeLog
2016-04-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gdbhistsize-history.exp: Save and unset GDBHISTFILE and
GDBHISTSIZE prior to the tests.
* gdb.base/gdbinit-history.exp: Likewise.
Commit 6e774b13c3 (Make ftrace tests work with remote targets) made
a few gdb.compile/compile.exp tests disappear:
-PASS: gdb.compile/compile.exp: call shared library function
-PASS: gdb.compile/compile.exp: expect 1
-PASS: gdb.compile/compile.exp: modify shared library variable
-PASS: gdb.compile/compile.exp: expect 15
This is because the test uses ldflags instead of using the shlib
option, so it misses linking with -rpath, resulting in:
(gdb) run
Starting program: .../compile/compile-shlib
.../compile/compile-shlib: error while loading shared libraries: compile-shlib.so: cannot open shared object file: No such file or directory
[Inferior 1 (process 18014) exited with code 0177]
We were missing a gdb_load_shlibs call, which is needed for remote
testing.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.compile/compile.exp: Use gdb_compile with "shlib=" option
instead of build_executable. Use gdb_load_shlibs.
Add some new control instructions to the opcodes library, and a new test
for these new instructions to the assembler. The new instructions use
an instruction flag longer than any seen before (on arc), and so the max
flag length is extended to accommodate this.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
* testsuite/gas/arc/nps400-2.d: New file.
* testsuite/gas/arc/nps400-2.s: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
* arc-opc.c (arc_flag_operands): Add new flags.
(arc_flag_classes): Add new classes.
This commit completes support for having multiple instructions with the
same mnemonic in non-contiguous blocks within the arc_opcodes table.
The commit adds an iterator mechanism for the arc_opcode_hash_entry
structure, which is then used in find_opcode_match to consider all
arc_opcode entries with the same mnemonic, even when these instructions
are stored in non-contiguous blocks.
I extend the comment on the arc_opcodes table to discuss how entries
within the table are organised, and to mention how instructions can be
split into multiple groups if needed, but that the table is still
searched in table order.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New
structure.
(arc_opcode_hash_entry_iterator_init): New function.
(arc_opcode_hash_entry_iterator_next): New function.
(find_opcode_match): Iterate over all arc_opcode entries
referenced by the arc_opcode_hash_entry passed in as a parameter.
opcodes/ChangeLog:
* arc-opc.c (arc_opcodes): Extend comment to discus table layout.
Building on earlier commits, this commit moves along support for having
multiple arc_opcode entries in the arc_opcodes table that have the same
mnemonic (name) field, but are not stored in a contiguous block in the
table.
In this commit we support looking up the arc_opcode_hash_entry from the
hash table, and passing this along to the find_opcode_match function,
which then finds the specific arc_opcode that we're assembling. We
still don't actually support the multiple chains of arc_opcode entries
in this commit, but the limitation is now isolated to the
find_opcode_match function.
There is no user visible change after this commit.
gas/ChangeLog:
* config/tc-arc.c (arc_find_opcode): Now returns
arc_opcode_hash_entry pointer.
(find_opcode_match): Update argument type, extract arc_opcode from
incoming arc_opcode_hash_entry.
(find_special_case_pseudo): Update return type.
(find_special_case_flag): Update return type.
(find_special_case): Update return type.
(assemble_tokens): Lookup arc_opcode_hash_entry based on
instruction mnemonic, then use find_opcode_match to identify
specific arc_opcode.
The arc assembler builds a hash table to hold references to arc_opcode
entries in the arc_opcodes table. This hash assumes that each mnemonic
will always appear in a contiguous blocks within the arc_opcodes table;
all ADD instruction will be together, all AND instructions will likewise
be together and so on.
The problem with this is that as different variations of arc are added,
then it is often more convenient to split instructions apart, so all the
base ADD instructions are together, but, variants of ADD specific to one
variation of arc are grouped with other instructions specific to that
arc variant. The current data structures don't support splitting the
instructions in this way.
This commit is a first step towards addressing this limitation. In this
commit the hash table that currently holds arc_opcode pointers directly,
instead holds a pointer to a new, intermediate, data structure. This
new data structure holds the pointer to the arc_opcode. In this way, we
can, in the future support having the intermediate structure hold
multiple pointers to different arc_opcode groups.
There should be no visible functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry): New structure.
(arc_find_opcode): New function.
(find_special_case_pseudo): Use arc_find_opcode.
(find_special_case_flag): Likewise.
(assemble_tokens): Likewise.
(md_begin): Build hash using struct arc_opcode_hash_entry.
I see the following fail on aarch64-linux
break void_func
Breakpoint 2 at 0x4007a0: file gdb/testsuite/gdb.reverse/finish-reverse.c, line 44.
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: set breakpoint on void_func
continue
Continuing.
Breakpoint 2, void_func () at gdb/testsuite/gdb.reverse/finish-reverse.c:44^M
44 void_test = 1; /* VOID FUNC */^M
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: continue to breakpoint: void_func
break *void_func^M
Note: breakpoint 2 also set at pc 0x4007a0.^M
Breakpoint 3 at 0x4007a0: file gdb/testsuite/gdb.reverse/finish-reverse.c, line 44.
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: set breakpoint at void_func's entry
reverse-finish^M
Run back to call of #0 void_func () at gdb/testsuite/gdb.reverse/finish-reverse.c:44
main (argc=1, argv=0x7ffffffb78) at gdb/testsuite/gdb.reverse/finish-reverse.c:98
98 void_func (); /* call to void_func */^M
(gdb) FAIL: gdb.reverse/finish-reverse-bkpt.exp: reverse-finish from void_func trips breakpoint at entry
The test assumes that brekapoints on "void_func" and "*void_func" are
set on different places because of function prologue. However, on
aarch64-linux, there is no prologue in void_func, so two breakpoints
are set at the same place (0x4007a0).
(gdb) disassemble void_func
Dump of assembler code for function void_func:
0x00000000004007a0 <+0>: adrp x0, 0x410000
0x00000000004007a4 <+4>: add x0, x0, #0xc14
0x00000000004007a8 <+8>: mov w1, #0x1
0x00000000004007ac <+12>: str w1, [x0]
0x00000000004007b0 <+16>: ret
The fix to this problem is to single step forward before setting
breakpoint on *void_func.
gdb/testsuite:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/finish-reverse-bkpt.exp: Use temporary breakpoint.
Execute "si" command.
I see the fail on aarch64-linux,
(gdb) reverse-next
Breakpoint 2, callee () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c:26^M
26 myglob++; return 0; /* ARRIVED IN CALLEE */
(gdb) FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: reverse-next over call trips user breakpoint at function entry
The test expects program stops at line 25, but program stops at line 26.
(gdb) maintenance info line-table
objfile: /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.reverse/next-reverse-bkpt-over-sr/next-reverse-bkpt-over-sr ((struct objfile *) 0x613000002880)
compunit_symtab: ((struct compunit_symtab *) 0x621000121760)
symtab: /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c ((struct symtab *) 0x6210001217e0)
linetable: ((struct linetable *) 0x6210001520d0):
INDEX LINE ADDRESS
0 25 0x0000000000400890
1 26 0x0000000000400890
2 27 0x00000000004008b0
(gdb) disassemble callee
Dump of assembler code for function callee:
0x0000000000400890 <+0>: adrp x0, 0x410000
0x0000000000400894 <+4>: add x0, x0, #0xcac
the line-table show that the first instruction of function callee is
mapped line 25 and 26. I am not sure the line-table is correct, but
it is not the point of this test. The goal of this test is to test
program hits the breakpoint on the first instruction of function after
'reverse-next', so I change this test to expect the breakpoint number
the program hits.
gdb/testsuite:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/next-reverse-bkpt-over-sr.exp: Match the breakpoint
number instead of the comments on some line.
Some test fails in gdb.reverse/break-reverse.exp on arm-linux lead me
seeing the following error message,
continue^M
Continuing.^M
Cannot remove breakpoints because program is no longer writable.^M
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Further execution is probably impossible.^M
^M
Breakpoint 3, bar () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/break-reverse.c:22^M
22 xyz = 2; /* break in bar */^M
(gdb) PASS: gdb.reverse/break-reverse.exp: continue to breakpoint: bar backward
this is caused by two entries in record_full_breakpoints, and their addr
is the same, but in_target_beneath is different.
during the record, we do continue,
Continuing.
infrun: clear_proceed_status_thread (Thread 13772.13772)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 13772.13772] for step-over
infrun: skipping breakpoint: stepping past insn at: 0x8620
Sending packet: $Z0,85f4,4#1d...Packet received: OK <----
.....
Sending packet: $vCont;c#a8...infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
Packet received: T05swbreak:;0b:9cf5ffbe;0d:9cf5ffbe;0f:f4850000;thread:p35cc.35cc;core:1;
Sending packet: $Z0,85f4,4#1d...Packet received: OK <-----
....
Sending packet: $z0,85f4,4#3d...Packet received: OK <-----
we can see breakpoint on 0x85f4 are inserted *twice*, but only removed
once. That is fine to remote target, because Z/z packets are
idempotent, but there is a leftover in record_full_breakpoints
in record-full target. The flow can be described as below,
record_full_breakpoints remote target
-----------------------------------------------------------------------
forward execution, continue, in_target_beneath 1 breakpoint inserted
insert breakpoints on 0x85f4 in_target_beneath 1
twice
program stops,
remove breakpoint on 0x85f4 in_target_beneath 1 breakpoint removed
reverse execution, continue, in_target_beneath 1 none is requested
insert breakpoints on 0x85f4, in_target_beneath 0
program stops,
remote breakpoint on 0x85f4, in_target_beneath 0 request to remove,
but GDBserver
doesn't know
now, the question is why breakoint on 0x85f4 is inserted twice? One
is the normal breakpoint, and the other is the single step breakpoint.
GDB inserts single step breakpoint to do single step. When program
stops at 0x85f4, both of them are set on 0x85f4, and GDB deletes
single step breakpoint, so in update_global_location_list, this
breakpoint location is no longer found, GDB call
force_breakpoint_reinsertion to mark it condition_updated, and insert
it again.
The reason force_breakpoint_reinsertion is called to update the
conditions in the target side, because the conditions may be
changed. My original fix is to not call force_breakpoint_reinsertion
if OLD_LOC->cond is NULL, but it is not correct if another location
on the same address has condition, GDB doesn't produce condition for
target side, but GDB should do.
Then, I change my mind back to make record-full handling breakpoint
idempotent, to align with remote target. Before insert a new entry
into record_full_breakpoints, look for existing one on the same
address first. I also add an assert on
"bp->in_target_beneath == in_target_beneath", to be safer.
gdb:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Return
early if entry on the address is found in
record_full_breakpoints.
I notice that bp_tgt won't be fully initialized if to_insert_breakpoint
isn't called in record_full_insert_breakpoint, and bp_tgt->reqstd_address
is zero, so an entry is added to record_full_breakpoints, but its address
is zero, which is wrong. This patch is to call gdbarch_breakpoint_from_pc
in the else branch to set bp_tgt->reqstd_address and bp_tgt->placed_size.
gdb:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Set
bp_tgt->reqstd_address and bp_tgt->placed_size.
When building with --enable-targets=all the target string is not set to
something that matches the pattern arc*-*, and so the script used to
decide if we should build big or little endian linker script currently
exits with an error.
This commit makes little endian linker script be the default, which will
be used when building for all targets, this matches the behaviour from
before I made the endianness switchable, when we only ever built little
endian linker scripts anyway.
ld/ChangeLog:
* emulparams/arc-endianness.sh: Make little endian default choice.
Pedro Alves
Claudiu Zissulescu
H.J. Lu
GDB Administrator
Maciej W. Rozycki
Oleg Endo
Simon Marchi
Simon Marchi
Martin Galvan
Alan Modra
Jan Kratochvil
Nick Clifton
Dan Gisselquist
Andrew Burgess
Yao Qi
James Greenhalgh