de2adf7070
* mn10300_sim.h (FETCH24): Define.
...
* mn10300_sim.h: Add defines for some registers found on the AM33.
1998-07-01 23:11:59 +00:00
a6cbaa652a
* mn10300_sim.h: Include bfd.h
...
(struct state): Add more room for processor specific registers.
start-sanitize-am33
(REG_E0): Define.
end-sanitize-am33
1998-06-30 17:28:54 +00:00
5eb78d70cc
Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com>
...
* dv-mn103tim.c: Include sim-assert.h
* dv-mn103ser.c (do_polling_event): Check for incoming data on
serial line and schedule next polling event.
(read_status_reg): schedule events to check for incoming data on
serial line and issue interrupt if necessary.
1998-06-25 14:17:47 +00:00
0df90cd8e4
Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
...
* interp.c (board): Rename am32 to stdeval1 as this is the name
consistently used to refer to the mn1030002 board.
1998-06-19 16:02:51 +00:00
f0ce242fcd
Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
...
* interp.c (sim_open): Fix typo in address of EXTMD register
(0x34000280, not 0x3400280).
1998-06-18 18:43:11 +00:00
7c8a2969e6
* simops.c (syscall): Handle change in opcode # for syscall.
...
* mn10300.igen (syscall): Likewise.
1998-06-18 00:03:00 +00:00
f14defcc75
Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
...
* dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
reset) are not enabled on reset.
1998-06-16 13:43:34 +00:00
2a62f119fa
Updates to dv-mn103iop.c, dv-mn103ser.c and inter.c
1998-06-14 21:19:53 +00:00
55a7ce4ea8
Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
...
* dv-mn103iop.c: New file for handling am32 io ports.
* configure.in: Add mn103iop to hw_device list.
* configure: Re-generate.
* interp.c (sim_open): Create io port device.
1998-06-12 20:46:23 +00:00
199cb74149
Add dv-mn103iop.
1998-06-12 20:15:43 +00:00
64d4b21972
New file for handling mn1030002 io ports.
1998-06-12 20:07:33 +00:00
c7dd0ea6bc
Add dv-mn103iop.c to list of files to sanitize out.
1998-06-12 20:05:08 +00:00
8c2de2aa33
Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com>
...
* dv-mn103int.c (external_group): Use enumerated types to access
correct group addresses.
* dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
triggers an interrupt on the higher-numbered timer's port.
1998-06-10 18:47:09 +00:00
3d64946ded
Support for timers for mn103002. Still needs more testing/debugging.
1998-06-08 21:57:42 +00:00
d38f2372a0
Add dv-mn103tim.c and dv-mn103ser.c
1998-06-08 18:09:40 +00:00
d3f76d42ac
Add timer and serial devices (mn103tim and mn103ser), support
...
--board=am32 for runtime control of device simulation, and adjust
interrupt settings to support am32 instead of am30.
1998-06-08 17:46:25 +00:00
7cb5d42660
Skeleton file for mn1030002 serial device implementation.
1998-06-08 17:34:04 +00:00
5f69de151a
Fix typo.
1998-06-08 17:28:08 +00:00
7146013910
Fix interrupt settings for mn103002, not mn10300 implementation.
1998-06-08 17:27:10 +00:00
6adf5185c1
* interp.c: (mn10300_option_handler): New function parses arguments
...
using sim-options.
start-sanitize-am30
* (board): Add --board option for specifying am32.
* (sim_open): Create new timer and serial devices and control
configuration of other am32 devices via board option.
end-sanitize-am30
1998-06-08 17:23:11 +00:00
7f1e9a13b2
Add new devices: mn103tim and mn103ser.
1998-06-08 17:18:02 +00:00
39e953a722
Split out hw-event code. Clean up interface. Update all users.
1998-05-25 07:37:30 +00:00
f872d0d643
Only enable H/W on some mips targets.
...
Move common hw-obj to Make-common
Pacify GCC
1998-05-22 05:23:04 +00:00
56833aba59
Back out of hw-main _callback -> _descriptor changes
1998-05-22 01:12:06 +00:00
26feb3a83d
Fix sign extension on 32 bit add/sub instructions.
1998-05-21 09:32:07 +00:00
9d45df1b8c
Tue Apr 28 18:28:58 1998 Geoffrey Noer <noer@cygnus.com>
...
* common/aclocal.m4: call AM_EXEEXT in SIM_AC_COMMON, define
AM_CYGWIN32 and AM_EXEEXT.
* common/Make-common.in: set EXEEXT, add missing EXEEXTs
to run and install-common rules.
* common/configure: regenerate
And update all subdirectory ChangeLogs and configure files.
1998-04-29 01:44:23 +00:00
5da9ce07eb
* configure: Regenerated to track ../common/aclocal.m4 changes.
...
* config.in: Ditto.
* acconfig.h: New file.
* configure.in: Reverted change of Apr 24; use sinclude again.
1998-04-26 22:03:55 +00:00
b1df34b9ed
* configure: Regenerated to track ../common/aclocal.m4 changes.
...
* config.in: Ditto.
* configure.in: Don't call sinclude.
1998-04-24 20:39:48 +00:00
5569ab1b26
Add sim-main.c to things to keep.
1998-04-21 17:45:28 +00:00
aba672aac5
* mn10300_sim.h: Declare all functions in op_utils.c using INLINE_SIM_MAIN.
...
* op_utils.c: Ditto.
* sim-main.c: New file. Include op_utils.c.
1998-04-14 04:26:04 +00:00
1e23866b9b
o Use new `!<field>' and `=<field>' operators in spec of
...
MOV and CMP instructions.
o Enable basic inlining. Diable use of SIM_MAIN_INLINE.
1998-04-14 00:59:30 +00:00
278bda4050
Cleanup INLINE support for simulators using common framework.
...
Make IGEN responsible for co-ordinating inlining of generated files.
By default, aclocal.m4 disabled all inlining.
1998-04-04 12:33:11 +00:00
6d133cc9df
Add sanitize-am30 markers. Keep details of AM30 implementation of
...
mn10300 out of the public eye.
Do something with top-level cgen directory.
1998-03-27 03:10:53 +00:00
1b756ba6d5
* dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of succeeding
...
interrupts, clear pending_handler when the handler isn't re-scheduled.
1998-03-26 14:00:18 +00:00
abf6ba256a
* Makefile.in (tmp-igen): Prefix all usage of move-if-change
...
script with $(SHELL) to make NT native builds happy.
* configure: Regenerate because of change to ../common/aclocal.m4.
1998-03-26 10:18:35 +00:00
51ccd82f7f
* configure.in: Make --enable-sim-common the default.
...
* configure: Re-generate.
* sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
address into Sate.regs[REG_PC] instead of common struct.
1998-03-26 01:13:38 +00:00
d1607ed316
* mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
1998-03-25 22:43:19 +00:00
52ef605e6d
* simops.c (OP_F0FD): Initialise variable 'sp' for rti instruction.
1998-03-25 17:10:01 +00:00
c357e16ac8
* dv-mn103int.c (decode_group): A group register every 4 bytes not 8.
...
(write_icr): Rewrite equation updating request field.
(read_iagr): Fix check that interrupt is still pending.
1998-03-25 14:52:44 +00:00
8077fed51e
* interp.c (sim_open): Tidy up device creation.
...
* dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero value.
(mn103int_io_read_buffer): Convert absolute address to register block offsets.
(read_icr, write_icr): Convert block offset into group offset.
1998-03-25 05:37:42 +00:00
6100784a60
* interp.c (sim_open): Create second 1mb memory region at 0x40000000.
...
(sim_open): Create a device tree.
(sim-hw.h): Include.
(do_interrupt): Delete, needs to use dv-mn103cpu.c
* dv-mn103int.c, dv-mn103cpu.c: New files.
1998-03-25 04:15:38 +00:00
8388c9a564
* mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM): Define.
...
(SP): Define.
1998-03-25 04:07:31 +00:00
d89fa2d80a
Re-do --enable-sim-hardware so that each simulator can specify the devices
...
it wants built.
Generate hw-config.h.
1998-03-25 01:41:33 +00:00
e855e57637
Pacify GCC.
1998-03-25 00:08:52 +00:00
8dcf23d28b
Add new files: mn10300.igen, mn10300.dc, sim-main.h, op_utils.c
1998-03-24 21:23:29 +00:00
55045e7b32
Port mn10300 simulator to build with the common simulator framework
...
under the configure option --enable-sim-common.
1998-03-24 20:30:03 +00:00
6274d39b87
Add code to support building mn10300 simulator with the common simulator
...
framework.
1998-03-24 20:26:06 +00:00
5abdc30591
Add support for building simulator based on common simulator framework.
...
Separate out files which get compiled depending on --enable-sim-common
configuration.
1998-03-24 20:19:55 +00:00
4f262a370d
Add ability to configure mn10300 built with common simulator code base.
...
Use --enable-sim-common to build this way; default configure has not
changed.
1998-03-24 20:16:25 +00:00
13e0e254dc
New {load/store}_{byte/half/word} macros for simulator built with
...
common framework.
1998-03-24 20:11:44 +00:00
0543ebbb26
Header file required by igen generated files.
1998-03-24 20:08:00 +00:00
7986ea1323
IGEN input files for mn10300 simulator.
1998-03-24 20:07:22 +00:00
3406569f7f
* simops.c (inc): Fix typo.
1998-02-28 01:41:28 +00:00
097e6924c2
* simops.c (signed multiply instructions): Cast input operands to
...
signed32 before casting them to signed64 so that the sign bit
is propagated properly.
1998-02-25 08:58:23 +00:00
a9faef120e
* Makefile.in: Last change was bad. Define NL_TARGET
...
so that targ-vals.h will be used instead of syscall.h.
* simops.c: Use targ-vals.h instead of syscall.h.
(OP_F020): Disable unsupported system calls.
1998-02-24 05:07:11 +00:00
e04b0d76da
* Makefile.in: Get header files from libgloss/mn10300/sys.
1998-02-23 17:51:23 +00:00
7eab31b76f
* simops.c: Include sim-types.h.
1998-02-22 22:59:43 +00:00
0983e650e5
* simops.c (multiply instructions): Cast input operands to a
...
signed64/unsigned64 type as appropriate.
1998-02-18 20:05:53 +00:00
fbb8b6b9ab
For sim_fetch_register / sim_store_register: Add LENGTH parameter,
...
return actual size of register, 0 if not applicable, -1 of legacy
implementation.
1998-02-17 04:06:38 +00:00
412c4e940e
Add config support for the size of the target address and OF cell.
1998-01-31 14:07:23 +00:00
462cfbc4eb
* aclocal.m4: Recognize --enable-maintainer-mode.
...
*/configure: Regenerated.
1998-01-20 06:37:00 +00:00
fc615b0b1e
* simops.c (call:16 call:32): Stack adjustment is determined solely
...
by the imm8 field.
1997-11-11 17:37:04 +00:00
b5da31ac7c
Correct name of file given in ChangeLog for change: Pass lma_p and
...
sim_write args to sim_load_file.
1997-10-25 05:04:25 +00:00
9e03a68f13
Add LMA_P and DO_WRITE arguments to sim/common/sim-load.c:sim_load_file().
...
Update all simulators.
Clarify behavour of sim_load in remote-sim.h
1997-10-22 05:26:27 +00:00
f4ab2b2fdc
* simops.c: Correctly handle register restores for "ret" and "retf"
...
instructions.
pr13306 related stuff.
1997-10-21 16:07:53 +00:00
92f91d1ff0
Remove need to update <targ>/Makefile.in when adding optional options
...
to <targ>/configure.in.
Simplify logic used to select target [default] endianness.
1997-09-23 01:25:26 +00:00
794e9ac96a
Simplify logic behind the generic configuration option --enable-sim-alignment.
1997-09-22 02:49:57 +00:00
b45caf050c
Add support for --enable-sim-alignment to simulator common aclocal.m4
...
Add support for --alignment={strict,nonstrict,forced} to simulator common
run-time options.
For v850 use, make the default NONSTRICT_ALIGNMENT.
1997-09-22 00:24:46 +00:00
6fea47635b
* configure: Regenerated to track ../common/aclocal.m4 changes.
1997-09-05 00:42:05 +00:00
8811705410
Fix doco on enable-sim-inline.
1997-08-27 22:43:18 +00:00
fafce69ab1
Add ABFD argument to sim_create_inferior. Document.
...
Add file sim-hload.c - generic load for hardware only simulators.
Review each simulators sim_open, sim_load, sim_create_inferior so that
they more closely match required behavour.
1997-08-27 04:44:41 +00:00
7230ff0faa
Flush defunct sim_kill.
1997-08-26 02:05:18 +00:00
247fccdeb5
Add ABFD argument to sim_open call. Pass through to sim_config so
...
that image properties such as endianness can be checked.
More strongly document the expected behavour of each of the sim_*
interfaces.
Add default endian argument to simulator config macro
SIM_AC_OPTION_ENDIAN. Use in sim_config.
1997-08-25 23:14:25 +00:00
d05b86b7fb
* interp.c (sim_resume): Clear State.exited.
...
(sim_stop_reason): If State.exited is nonzero, then indicate that
the simulator exited instead of stopped.
* mn10300_sim.h (struct _state): Add exited field.
* simops.c (syscall): Set State.exited for SYS_exit.
Fixes problem found bin Felix.
1997-06-24 19:45:17 +00:00
c370b3cd95
* simops.c: Fix thinko in last change.
1997-06-12 04:14:42 +00:00
dbdb5bd881
* simops.c: "call" stores the callee saved registers into the
...
stack! Update the stack pointer properly when done with
register saves.
1997-06-10 22:59:13 +00:00
0a8fa63cb8
* simops.c: Fix return address computation for "call" instructions.
1997-06-10 18:32:40 +00:00
09e142d5a2
* interp.c (sim_resume): Add missing case in big switch
...
statement (for extb instruction).
1997-05-22 05:28:34 +00:00
003c91bec4
* interp.c: Replace all references to load_mem and store_mem
...
with references to load_byte, load_half, load_3_byte, load_word
and store_byte, store_half, store_3_byte, store_word.
(INLINE): Delete definition.
(load_mem_big): Likewise.
(max_mem): Make it global.
(dispatch): Make this function inline.
(load_mem, store_mem): Delete functions.
* mn10300_sim.h (INLINE): Define.
(RLW): Delete unused definition.
(load_mem, store_mem): Delete declarations.
(load_mem_big): New definition.
(load_byte, load_half, load_3_byte, load_word): New functions.
(store_byte, store_half, store_3_byte, store_word): New functions.
* simops.c: Replace all references to load_mem and store_mem
with references to load_byte, load_half, load_3_byte, load_word
and store_byte, store_half, store_3_byte, store_word.
1997-05-20 23:53:47 +00:00
4df7aeb3c5
* interp.c (dispatch): Make this an inline function.
...
* simops.c (syscall): Use callback->write regardless of
what file descriptor we're writing too.
1997-05-19 19:55:31 +00:00
b07a1e78c5
* interp.c (load_mem_big): Remove function. It's now a macro
...
defined elsewhere.
(compare_simops): New function.
(sim_open): Sort the Simops table before inserting entries
into the hash table.
* mn10300_sim.h: Remove unused #defines.
(load_mem_big): Define.
Another 20% so performance improvement for the mn10300 simulator.
1997-05-18 22:57:49 +00:00
234a9a49cf
* interp.c (load_mem): If we get a load from an out of range
...
address, abort.
(store_mem): Likewise for stores.
(max_mem): New variable.
1997-05-16 22:37:02 +00:00
8def922034
* mn10300_sim.h: Fix ordering of bits in the PSW.
1997-05-06 19:42:17 +00:00
baa83bcc80
* interp.c: Improve hashing routine to avoid long list
...
traversals for common instructions. Add HASH_STAT support.
Rewrite opcode dispatch code using a big switch instead of
cascaded if/else statements. Avoid useless calls to load_mem.
1997-05-06 19:27:22 +00:00
26e9f63c11
* mn10300_sim.h (struct _state): Add space for mdrq register.
...
(REG_MDRQ): Define.
* simops.c: Don't abort for trap. Add support for the extended
instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
and "bsch".
1997-05-06 00:35:42 +00:00
8517f62b16
Ref gdb/11763 - can't stop a running simulator:
...
o Provide poll_quit callback to simulators
so that they can poll for SIGINT on
clueless OS's.
o Add sim_stop to simulators so that clients
can request a halt (eg gdbtk's STOP button)
Works for PPC!
o Re-arange remote-sim.c so that the
hard work is moved from gdbsim_resume()
to gdbsim_wait() (where it should be).
1997-04-18 12:24:52 +00:00
6cc6987e1e
* Makefile.in (SIM_OBJS): Add sim-load.o.
...
* interp.c (sim_kind, myname): New static locals.
(sim_open): Set sim_kind, myname. Ignore -E arg.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set start address from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
1997-04-17 10:27:47 +00:00
87e43259f1
Cleanups to compile under FreeBSD
1997-04-17 06:05:19 +00:00
81f13ed1f3
* simops.c (syscall): Handle new mn10300 calling conventions.
...
Forgot to check this in last week.
1997-04-08 06:01:20 +00:00
08db4a658e
Get configure to define RETSIGTYPE
1997-04-07 05:58:59 +00:00
ea553f5643
* Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
...
corresponding change in opcodes directory.
1997-04-05 01:03:01 +00:00
8a7c3105b5
* interp.c (sim_open): New arg `kind'.
1997-04-02 23:39:50 +00:00
fbda74b1c1
* aclocal.m4: Check for stdlib.h, string.h, strings.h, unistd.h.
...
(sim-debug): Allow arguments. Define WITH_DEBUG in addition to
-DDEBUG.
* configure: Regenerated to track ../common/aclocal.m4 changes.
1997-04-02 23:17:50 +00:00
a35e91c3c7
New file common/sim-config.c sets/checks simulator configuration options.
...
Update common/aclocal.m4 to better work with sim-config.[hc].
1997-04-02 05:04:25 +00:00
65b784d8a5
* simops.c: Fix register extraction for a two "movbu" variants.
...
Somewhat simplify "sub" instructions.
Correctly sign extend operands for "mul". Put the correct
half of the result in MDR for "mul" and "mulu".
Implement remaining instructions.
Tweak opcode for "syscall".
1997-03-20 19:02:44 +00:00
0915c8433b
* simops.c: Do syscall emulation in "syscall" instruction. Add
...
dummy "trap" instruction.
Cleanups for the beta release.
1997-03-18 21:24:38 +00:00
c695046ac9
Move SIM_AC_OPTION_ macros out of SIM_AC_COMMON macro - was trashing
...
optional arguments.
* Regenerate all configure scripts.
1997-03-18 14:28:34 +00:00
a77aa7ec4b
* configure: Re-generate.
...
* Make-common.in (CSEARCH): Do not include the gdb directory in
the search path.
* Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
SIM_WARNING): Drop, requiring the simulator specific Makefile.in
to explicitly incorporate these.
* aclocal.m4 (--enable-sim-alignment); New option. Strongly
specify the alignment restrictions of the target architecture -
without this option all alignment restrictions are accomodated.
(--enable-sim-assert): New option. Conditionally compile in
assertion statements.
(--enable-sim-float): New option. Strongly specify the target's
floating point support.
(--enable-sim-hardware): New option. Specify the hardware devices
included in the simulation.
(--enable-sim-packages): New option. Specify the hardware
packages included in the simulation.
(--enable-sim-regparm): New option. Specify that parameters be
passed in registers instead of on the stack.
(--enable-sim-reserved-bits): New option. Specify that reserved
bits within an instruction are are correctly set.
(--enable-sim-smp): New option. Specify the level of SMP support
to be included in the simulator.
(--enable-sim-stdcall): New option. Specify an alternative
function call convention.
(--enable-sim-xor-endian): New option. Configure xor-endian
support used by some targets to implement bi-endian support.
1997-03-17 15:29:29 +00:00
601fb8aea6
Regenerate simulator configure scripts; Remove d10v traps 1-3, Make 15 the system call trap, keeping 0 temporarily
1997-03-14 16:21:57 +00:00
53b9417eb3
* interp.c (sim_open): New SIM_DESC result. Argument is now
...
in argv form.
(other sim_*): New SIM_DESC argument.
1997-03-13 20:55:26 +00:00
Jeff Law