different architecture tags. Add a test case to make sure that this works,
and update readelf so that it will not seg-fault when trying to display the
attributes of binaries with invalid architecture tags.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Return false if
failed to merge.
* ld-arm/attr-merge-arch-2.d: New test case.
* ld-arm/attr-merge-arch-2a.s: New test case source file.
* ld-arm/attr-merge-arch-2b.s: Likewise.
* ld-arm/arm-elf.exp: Run new test case.
* readelf.c (display_arm_attribute): Use unsigned int type for
tag, val and type variables.
In the recent review to my patch about copying files to remote host,
we find that we need a board file which is more closely mapped real
remote host testing to improve coverage. With the board file
local-remote-host-native.exp, DejaGNU copies files to
$build/gdb/testsuite/remote-host to emulate the effect of remote host.
Is it OK?
gdb/testsuite:
2014-09-16 Yao Qi <yao@codesourcery.com>
* boards/local-remote-host-native.exp: New file.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
gdb:
2014-08-13 Omair Javaid <omair.javaid@linaro.org>
* arm-tdep.c (arm_record_vdata_transfer_insn): Added record handler for
vector data transfer instructions.
(arm_record_coproc_data_proc): Updated.
gdb:
2014-08-13 Omair Javaid <omair.javaid@linaro.org>
* arm-tdep.c (arm_record_coproc_data_proc): Add record handler stubs
for asimd, vfp and coprocessor insns.
(arm_record_asimd_vfp_coproc): Add record handler for asimd, vfp
and coprocessor insns.
(thumb2_record_coproc_insn): New function.
(thumb2_record_decode_insn_handler): Update coprocessor insns record
handlers.
(decode_insn): Install arm_record_asimd_vfp_coproc as handler for
opcode 110 insns.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
The test does a backtrace to see which thread (#2 or #3) is assigned
to which SIGUSR (1 or 2). If the main thread gets to all_threads_running
before the sigusr threads get to their entry point, then the function
name isn't in the backtrace and the test fails.
Alas this version of the code is within epsilon of what I started with,
and then over-simplified things.
If I want to change the signalled state of multiple threads
it's a bit cumbersome to do with the "signal" command.
What you really want is a way to set the signal state of the
desired threads and then just do "continue".
This patch adds a new command, queue-signal, to accomplish this.
Basically "signal N" == "queue-signal N" + "continue".
That's not precisely true in that "signal" can be used to inject
any signal, including signals set to "nopass"; whereas "queue-signal"
just queues the signal as if the thread stopped because of it.
"nopass" handling is done when the thread is resumed which
"queue-signal" doesn't do.
One could add extra complexity to allow queue-signal to be used to
deliver "nopass" signals like the "signal" command. I have no current
need for it so in the interests of incremental complexity, I have
left such support out and just have the code flag an error if one
tries to queue a nopass signal.
gdb/ChangeLog:
* NEWS: Mention new "queue-signal" command.
* infcmd.c (queue_signal_command): New function.
(_initialize_infcmd): Add new queue-signal command.
gdb/doc/ChangeLog:
* gdb.texinfo (Signaling): Document new queue-signal command.
gdb/testsuite/ChangeLog:
* gdb.threads/queue-signal.c: New file.
* gdb.threads/queue-signal.exp: New file.
I had occasion to use with_gdb_prompt in a test for the patch for PR 17314
and was passing the plain text prompt as the value, "(top-gdb)",
instead of a regexp, "\(top-gdb\)" (expressed as "\\(top-gdb\\)" in TCL).
I then discovered that in order to restore the prompt gdb passes the
original value of $gdb_prompt to "set prompt", which works because
"set prompt \(gdb\) " is equivalent to "set prompt (gdb) ".
Perhaps I'm being overly cautious but this feels a bit subtle,
but at any rate as an API choice I'd much rather pass the plain text
form to with_gdb_prompt.
I also discovered that the initial value of gdb_prompt is set in
two places to two different values.
At the global level gdb.exp sets it to "\[(\]gdb\[)\]"
and default_gdb_init sets it to "\\(gdb\\)".
The former form is undesirable as an argument to "set prompt",
but it's not clear to me that just deleting this code won't break
anything. Thus I just changed the value to be consistent and added
a comment.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_prompt): Add comment and change initial value to
be consistent with what default_gdb_init uses.
(with_gdb_prompt): Change form of PROMPT argument from a regexp to
the plain text of the prompt. Add some logging printfs.
* gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
See:
https://sourceware.org/ml/gdb-patches/2014-09/msg00404.html
We have a number of places that do gdb_run_cmd followed by gdb_expect,
when it would be better to use gdb_test_multiple or gdb_test.
This converts all that "grep gdb_run_cmd -A 2 | grep gdb_expect"
found.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/testsuite/
2014-09-12 Pedro Alves <palves@redhat.com>
* gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
* gdb.arch/i386-size-overlap.exp: Likewise.
* gdb.arch/i386-size.exp: Likewise.
* gdb.arch/i386-unwind.exp: Likewise.
* gdb.base/a2-run.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/charset.exp: Likewise.
* gdb.base/chng-syms.exp: Likewise.
* gdb.base/commands.exp: Likewise.
* gdb.base/dbx.exp: Likewise.
* gdb.base/find.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/jit-simple.exp: Likewise.
* gdb.base/reread.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/step-bt.exp: Likewise.
* gdb.cp/mb-inline.exp: Likewise.
* gdb.cp/mb-templates.exp: Likewise.
* gdb.objc/basicclass.exp: Likewise.
* gdb.threads/killed.exp: Likewise.
The IRIX support wants to set a breakpoint to be hit when the startup
phase is complete, which is where shared libraries have been mapped
in. AFAIU, for most IRIX ports, that location is the entry point.
For MIPS IRIX however, GDB needs to set a breakpoint earlier, in
__dbx_link, as explained by:
#ifdef SYS_syssgi
/* On mips-irix, we need to stop the inferior early enough during
the startup phase in order to be able to load the shared library
symbols and insert the breakpoints that are located in these shared
libraries. Stopping at the program entry point is not good enough
because the -init code is executed before the execution reaches
that point.
So what we need to do is to insert a breakpoint in the runtime
loader (rld), more precisely in __dbx_link(). This procedure is
called by rld once all shared libraries have been mapped, but before
the -init code is executed. Unfortuantely, this is not straightforward,
as rld is not part of the executable we are running, and thus we need
the inferior to run until rld itself has been mapped in memory.
For this, we trace all syssgi() syscall exit events. Each time
we detect such an event, we iterate over each text memory maps,
get its associated fd, and scan the symbol table for __dbx_link().
When found, we know that rld has been mapped, and that we can insert
the breakpoint at the symbol address. Once the dbx_link() breakpoint
has been inserted, the syssgi() notifications are no longer necessary,
so they should be canceled. */
proc_trace_syscalls_1 (pi, SYS_syssgi, PR_SYSEXIT, FLAG_SET, 0);
#endif
The loop in irix_solib_create_inferior_hook then runs until whichever
breakpoint is hit first, the one set by solib-irix.c or the one set by
procfs.c.
Note the comment in disable_break talks about __dbx_init, but I think
that's a typo for __dbx_link:
- /* Note that it is possible that we have stopped at a location that
- is different from the location where we inserted our breakpoint.
- On mips-irix, we can actually land in __dbx_init(), so we should
- not check the PC against our breakpoint address here. See procfs.c
- for more details. */
This looks very much like referring to the loop in
irix_solib_create_inferior_hook stopping at __dbx_link instead of at
the entry point.
What this patch does is convert these deprecated raw breakpoints to
standard solib_event breakpoints. When the first solib-event
breakpoint is hit, we delete all solib-event breakpoints. We do that
in the so_ops->handle_event hook.
This allows getting rid of the loop in irix_solib_create_inferior_hook
completely, which should allow properly handling signals and other
events in the early startup phase, like in SVR4.
Built on x86_64 Fedora 20 with --enable-targets=all (builds
solib-irix.c).
Joel tested that with an earlier version of this patch "info shared"
after starting a program gave the same list of shared libraries as
before.
gdb/ChangeLog:
2014-09-12 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_solib_event_breakpoints_at_next_stop)
(create_and_insert_solib_event_breakpoint): New functions.
* breakpoint.h (create_and_insert_solib_event_breakpoint)
(remove_solib_event_breakpoints_at_next_stop): New declarations.
* procfs.c (dbx_link_bpt_addr, dbx_link_bpt): Delete globals.
(remove_dbx_link_breakpoint): Delete function.
(insert_dbx_link_bpt_in_file): Use
create_and_insert_solib_event_breakpoint instead of
deprecated_insert_raw_breakpoint.
(procfs_wait): Don't check whether we hit __dbx_link here.
(procfs_mourn_inferior): Don't delete the __dbx_link breakpoint
here.
* solib-irix.c (base_breakpoint): Delete global.
(disable_break): Delete function.
(enable_break): Use create_solib_event_breakpoint
instead of deprecated_insert_raw_breakpoint.
(irix_solib_handle_event): New function.
(irix_solib_create_inferior_hook): Don't run the target or disable
the mapping-complete breakpoint here.
(_initialize_irix_solib): Install irix_solib_handle_event as
so_ops->handle_event hook.
This patch fixes two related problems:
- By default gas is supposed to bump the current architecture
(starting with v6) as it finds "higher" instructions as the
assembling progresses. There are four possible cases depending on
the usage of the -A and -bump options:
(a) No -A and -bump are specified. In this case max_architecture
must be the highest architecture not conflicting with the
default architecture. The default opcode architecture is
indirectly set in configure.tgt and is "v9" in sparc64 systems
(from "v9-64"). Thus the maximum architecture in sparc64
systems must be "v9b". No warnings are echoed when the assembly
of an instruction bumps the current architecture.
(b) Only -bump is specified. This is like (a) but warnings are
always issued when the assembly of an instruction bumps the
current architecture.
(c) Only -A is specified. In this case bumping to a new
architecture is an error.
(d) Both -A and -bump are specified. In this case max_architecture
must be the highest architecture not conflicting with the
default architecture, but warnings are only to be issued when
bumping to an architecture higher than the architecture selected
in the -A option.
`max_architecture' is a global variable defined in tc-sparc.c which
is initialized to the opcode architecture corresponding to the
default architecture ("sparclite" for sparc-* targets and "v9" for
sparc64-* targets). Then in `md_begin' it is set to the highest
non-conflicting architecture, but only when both -A and -bump are
specified.
Thus (a) does not work:
$ echo "fzero %f0" | as
{standard input}: Assembler messages:
{standard input}:1: Error: Architecture mismatch on "fzero".
{standard input}:1: (Requires v9a|v9b; requested architecture is v9.)
Neither (b):
$ echo "fzero %f0" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Error: Architecture mismatch on "fzero".
{standard input}:1: (Requires v9a|v9b; requested architecture is v9.)
Only (d) does:
$ echo "fzero %f0" | as -Av9 -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9a" on "fzero"
This patch fixes that function to "upgrade" `max_architecture' also
in the (a) and (b) cases.
Note that this problem becomes apparent only in sparc64-* targets
because in sparc-* targets the default architecture is the "higher"
among the 32bit architectures ("sparclite").
- Gas maintains a set of hardware capabilities associated with each
gas architecture, in `sparc_arch_table'. On the other hand
libopcodes maintains a set of hardware capabilities needed by each
individual sparc instruction.
When an instruction is assembled in `sparc_ip' gas checks for the
presence of the hardware capabilities required by the instruction,
emitting an error if some capability is missing.
However, this mechanism does not work properly if the current
architecture is bumped due to an instruction requiring new hw
capabilities not present on either the default architecture or an
architecture specified with -A:
$ echo "fzero %f0" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9a" on "fzero"
{standard input}:1: Error: Hardware capability "vis" not enabled for "fzero".
This patch fixes this by adding the set of required hw caps of an
instruction if it triggers an architecture bump.
The patch has been tested in sparc64-unknown-linux-gnu.
gas/ChangeLog:
2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
when bumping the current architecture.
(md_begin): Adjust the highetst architecture level also when a
specific architecture is not requested.
The problem is that rs6000_frame_cache attempts to read the stack backchain via
read_memory_unsigned_integer, which throws an exception if the stack pointer is
invalid. With this patch, it calls safe_read_memory_integer instead, which
doesn't throw an exception and allows for safe handling of that situation.
gdb/ChangeLog
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Ulrich Weigand <uweigand@de.ibm.com>
PR tdep/17379
* rs6000-tdep.c (rs6000_frame_cache): Use safe_read_memory_integer
instead of read_memory_unsigned_integer.
gdb/testcase/ChangeLog
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
PR tdep/17379
* gdb.arch/powerpc-stackless.S: New file.
* gdb.arch/powerpc-stackless.exp: New file.
I have started seeing occasional runaway 'attach' processes these days.
I cannot be certain it is really caused by this patch, for example
grep 'FAIL.*cmdline attach run' does not show anything in my logs.
But as I remember this 'attach' runaway process always happened in GDB (but
I do not remember it in the past months) I think it would be most safe to just
solve it forever by [attached].
gdb/testsuite/ChangeLog
2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/attach.c: Include unistd.h.
(main): Call alarm. Add label postloop.
* gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
gdb_breakpoint, gdb_continue_to_breakpoint.
(test_command_line_attach_run): Kill ${testpid} in one exit path.
This commit makes linux-waitpid.c include common-defs.h. GDB's
inclusion of defs.h is removed, but gdbserver's inclusion of
server.h remains to support some gdbserver-specific debug code
that cannot presently be merged. A new FIXME documents this.
gdb/ChangeLog:
* nat/linux-waitpid.c: Include common-defs.h.
[GDBSERVER]: Add FIXME comment.
[!GDBSERVER]: Don't include defs.h or signal.h.
(linux_debug) [!GDBSERVER]: Remove empty block.
This commit makes nat/x86-dregs.c include common-defs.h rather than
defs.h or server.h. An extra header required including in order to
support this change.
gdb/ChangeLog:
* nat/x86-dregs.c: Include common-defs.h and break-common.h.
Don't include defs.h or server.h.
This commit makes nat/linux-btrace.c include common-defs.h rather
than defs.h or server.h. A couple of minor changes were required
to support this change.
gdb/ChangeLog:
* nat/linux-btrace.c: Include common-defs.h.
Don't include defs.h, server.h or gdbthread.h.
* nat/linux-btrace.h (struct target_ops): New forward declaration.
This commit makes 19 of the 22 shared .c files in common, nat and
target include common-defs.h instead of defs.h/server.h. The
remaining three files need slight extra work and are dealt with
in separate commits.
gdb/ChangeLog:
* common/agent.c: Include common-defs.h.
Don't include defs.h or server.h.
* common/buffer.c: Likewise.
* common/common-debug.c: Likewise.
* common/common-utils.c: Likewise.
* common/errors.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/gdb_vecs.c: Likewise.
* common/print-utils.c: Likewise.
* common/ptid.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.c: Likewise.
* common/xml-utils.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/mips-linux-watch.c: Likewise.
* target/waitstatus.c: Likewise.
This introduces common-regcache.h. This contains two functions that
allow nat/linux-btrace.c to be simplified. A better long term
solution would be unify the regcache code, but this is sufficient for
now.
gdb/ChangeLog:
* common/common-regcache.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-regcache.h.
* regcache.h: Include common-regcache.h.
(regcache_read_pc): Don't declare.
* regcache.c (get_thread_regcache_for_ptid): New function.
* nat/linux-btrace.c: Don't include regcache.h.
Include common-regcache.h.
(perf_event_read_bts): Use get_thread_regcache_for_ptid.
gdb/gdbserver/ChangeLog:
* regcache.h: Include common-regcache.h.
(regcache_read_pc): Don't declare.
* regcache.c (get_thread_regcache_for_ptid): New function.
With larger binaries on 64-bit systems, or indeed just binaries that
have a large gap between text and data, it is possible for the
.eh_frame_hdr lookup table entry values to overflow a signed 32-bit
relative offset. It is also a requirement for the glibc FDE lookup
code that only one FDE claim to cover any given address.
* elf-bfd.h (struct eh_frame_array_ent): Add "range".
* elf-eh-frame.c (_bfd_elf_write_section_eh_frame): Stash address
range of FDEs to hdr_info->array.
(_bfd_elf_write_section_eh_frame_hdr): Report overflow in
.eh_frame_hdr entries, and overlapping FDEs.
gdb/
* regcache.h (struct regset): Declare.
Commit 0b3092721e added uses of struct regset to
gdb/regcache.h, but that struct is not declared in this file, and, as it
happens, also nowhere else in the #include chain on x86 GNU/Hurd. This results
in warnings/errors such as:
gcc-4.8 [...] ../../W._C._Handy/gdb/gdb.c
In file included from ./nm.h:25:0,
from ../../W._C._Handy/gdb/defs.h:454,
from ../../W._C._Handy/gdb/gdb.c:19:
../../W._C._Handy/gdb/regcache.h:190:9: warning: 'struct regset' declared inside parameter list [enabled by default]
size_t size);
^
../../W._C._Handy/gdb/regcache.h:190:9: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
../../W._C._Handy/gdb/regcache.h:193:10: warning: 'struct regset' declared inside parameter list [enabled by default]
int regnum, void *buf, size_t size);
^
Doing:
gdb --pid=PID -ex run
Results in GDB getting a SIGTTIN, and thus ending stopped. That's
usually indicative of a missing target_terminal_ours call.
E.g., from the PR:
$ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run
[1] 28263
[1] Killed sleep 1h
[2]+ Stopped gdb -batch sleep $p -ex run
The workaround is doing:
gdb -ex "attach $PID" -ex "run"
instead of
gdb [-p] $PID -ex "run"
With the former, gdb waits for the attach command to complete before
moving on to the "run" command, because the interpreter is in sync
mode at this point, within execute_command. But for the latter,
attach_command is called directly from captured_main, and thus misses
that waiting. IOW, "run" is running before the attach continuation
has run, before the program stops and attach completes. The broken
terminal settings are just one symptom of that. Any command that
queries or requires input results in the same.
The fix is to wait in catch_command_errors (which is specific to
main.c nowadays), just like we wait in execute_command.
gdb/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* main.c: Include "infrun.h".
(catch_command_errors, catch_command_errors_const): Wait for the
foreground command to complete.
* top.c (maybe_wait_sync_command_done): New function, factored out
from ...
(maybe_wait_sync_command_done): ... here.
* top.h (maybe_wait_sync_command_done): New declaration.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
Several places in the testsuite have a copy of a snippet of code that
spawns a test program, waits a bit, and then does some PID munging for
Cygwin. This is in order to have GDB attach to the spawned program.
This refactors all that to a common procedure.
(multi-attach.exp wants to spawn multiple processes, so this makes the
new procedure's interface work with lists.)
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (spawn_wait_for_attach): New procedure.
* gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
(do_command_attach_tests): Use spawn_wait_for_attach.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
This introduces common/symbol.h. This file declares a function that
the shared code can use and that the clients must implement. It also
changes some shared code to use these functions.
gdb/ChangeLog:
* common/symbol.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/symbol.h.
* minsyms.c (find_minimal_symbol_address): New function.
* common/agent.c: Include common/symbol.h.
[!GDBSERVER]: Don't include objfiles.h.
(agent_look_up_symbols): Use find_minimal_symbol_address.
gdb/gdbserver/ChangeLog:
* symbol.c: New file.
* Makefile.in (SFILES): Add symbol.c.
(OBS): Add symbol.o.
This commit introduces two new functions to stop and restart target
processes that shared code can use and that clients must implement.
It also changes some shared code to use these functions.
gdb/ChangeLog:
* target/target.h (target_stop_ptid, target_continue_ptid):
Declare.
* target.c (target_stop_ptid, target_continue_ptid): New
functions.
* common/agent.c [!GDBSERVER]: Don't include infrun.h.
(agent_run_command): Always use target_stop_ptid and
target_continue_ptid.
gdb/gdbserver/ChangeLog:
* target.c (target_stop_ptid, target_continue_ptid): New
functions.
This introduces target/target.h. This file declares some functions
that the shared code can use and that clients must implement. It also
changes some shared code to use these functions.
gdb/ChangeLog:
* target/target.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add target/target.h.
* target.h: Include target/target.h.
(target_read_memory, target_write_memory): Don't declare.
* target.c (target_read_uint32): New function.
* common/agent.c: Include target/target.h.
[!GDBSERVER]: Don't include target.h.
(helper_thread_id): Type changed to uint32_t.
(agent_get_helper_thread_id): Use target_read_uint32.
(agent_run_command): Always use target_read_memory and
target_write_memory.
(agent_capability): Type changed to uint32_t.
(agent_capability_check): Use target_read_uint32.
gdb/gdbserver/ChangeLog:
* target.h: Include target/target.h.
* target.c (target_read_memory, target_read_uint32)
(target_write_memory): New functions.
This commit adds a new global flag show_debug_regs to common-debug.h
to replace the flag debug_hw_points used by gdbserver and by the
Linux x86 and AArch64 ports, and to replace the flag maint_show_dr
used by the Linux MIPS port.
Note that some debug printing in the AArch64 port was enabled only if
debug_hw_points > 1 but no way to set debug_hw_points to values other
than 0 and 1 was provided; that code was effectively dead. This
commit enables all debug printing if show_debug_regs is nonzero, so
the AArch64 output will be more verbose than previously.
gdb/ChangeLog:
* common/common-debug.h (show_debug_regs): Declare.
* common/common-debug.c (show_debug_regs): Define.
* aarch64-linux-nat.c (debug_hw_points): Don't define. Replace
all uses with show_debug_regs. Replace all uses that considered
debug_hw_points as a multi-value integer with straight boolean
uses.
* x86-nat.c (debug_hw_points): Don't define. Replace all uses
with show_debug_regs.
* nat/x86-dregs.c (debug_hw_points): Don't declare. Replace
all uses with show_debug_regs.
* mips-linux-nat.c (maint_show_dr): Don't define. Replace all
uses with show_debug_regs.
gdb/gdbserver/ChangeLog:
* server.h (debug_hw_points): Don't declare.
* server.c (debug_hw_points): Don't define. Replace all uses
with show_debug_regs.
* linux-aarch64-low.c (debug_hw_points): Don't define. Replace
all uses with show_debug_regs.
This fixes two FAIL results on this testcase which were caused by a
misplaced "continue" command. This testcase used to end inferior's
execution too soon, causing the following tests to fail. Now we break
right after inferior's loop and perform the rest of the tests there.
gdb/testsuite/ChangeLog:
* gdb.fortran/array-element.exp: Remove unexpected "continue"
command in testcase. Simplify testcase.
Since the last change to address_from_register, it no longer supports
targets that require a special conversion (gdbarch_convert_register_p)
for plain pointer type; I had assumed no target does so.
This turned out to be incorrect: MIPS64 n32 big-endian needs such a
conversion in order to properly sign-extend pointer values.
This patch fixes this regression by handling targets that need a
special conversion in address_from_register as well.
gdb/ChangeLog:
* findvar.c (address_from_register): Handle targets requiring
a special conversion routine even for plain pointer types.
Old AIX versions required GDB to update the stack pointer register and
execute at least one instruction before accessing the space newly allocated
on the user stack. This was done using the exec_one_dummy_insn routine
in rs6000-nat.c
However, in currently supported AIX versions (tested on AIX 6.1), this hack
is no longer necessary. In fact, removing the hack actually fixed several
test case failures, and removes a call to deprecated_insert_raw_breakpoint.
gdb/ChangeLog:
* rs6000-nat.c (exec_one_dummy_insn): Remove.
(store_register): Do not call exec_one_dummy_insn.
