PR gas/23570
* config/tc-avr.c (md_pseudo_table): Add entry for "secction".
(avr_set_section): New function. Ensures that the .noinit section
gets the NOBITS ELF section type.
Collects information during the prologue scan and uses this to unwind
registers when no DWARF information is available.
This patch has been tested by disabling the DWARF stack unwinders, and
running the complete GDB testsuite against a range of RISC-V targets.
The results are comparable to running with the DWARF unwinders in
place.
gdb/ChangeLog:
* riscv-tdep.c: Add 'prologue-value.h' include.
(struct riscv_unwind_cache): New struct.
(riscv_debug_unwinder): New global.
(riscv_scan_prologue): Update arguments, capture register details
from prologue scan.
(riscv_skip_prologue): Reformat arguments line, move end of
prologue calculation into riscv_scan_prologue.
(riscv_frame_cache): Update return type, create
riscv_unwind_cache, scan the prologue, and fill in remaining cache
details.
(riscv_frame_this_id): Use frame id computed in riscv_frame_cache.
(riscv_frame_prev_register): Use the trad_frame within the
riscv_unwind_cache.
(_initialize_riscv_tdep): Add 'set/show debug riscv unwinder'
flag.
Adds two new functions to the trad-frame API and update the internals
of trad-frame to use the new functions. These functions will be used
in later commits.
gdb/ChangeLog:
* trad-frame.h (trad_frame_set_realreg): Declare.
(trad_frame_set_addr): Declare.
* trad-frame.c (trad_frame_set_realreg): Define new function.
(trad_frame_set_addr): Define new function.
(trad_frame_set_reg_realreg): Use new function.
(trad_frame_set_reg_addr): Use new function.
VMA of the first section in the segment containing the ELF file header
(and possibly section headers too) can't be used to reliably find the
size of the headers plus padding. What's really needed is sh_offset
of the first section assuming it has contents (vma does have a
relationship to sh_offset, but is only guaranteed in demand paged
executables).
If the first section is SHT_NOBITS and it hasn't been converted to
have file contents by the existence of a following SHT_PROGBITS
section in the same segment, the sh_offset value also isn't reliable.
PR 23595
elf.c (copy_elf_program_header): When first segment contains
only the headers and SHT_NOBITS sections, use segment p_filesz
to calculate header and padding size. Use filepos of the first
section otherwise.
Fixes pr23591 test failures on hppa64-hpux and score-elf, and xfails
frv-linux and lm32-linux.
PR ld/23591
* testsuite/ld-elf/pr23591a.s,
* testsuite/ld-elf/pr23591b.s,
* testsuite/ld-elf/pr23591c.s: Don't start directives in first column.
* testsuite/ld-elf/pr23591.d: xfail frv-linux and lm32-linux.
Allow __start___sancov_cntrs as a local symbol.
This patch fixes two violations of the ARI (use of ATTRIBUTE_UNUSED and
"%ll").
gdb/ChangeLog
* compile/compile-cplus-types.c (compile_cplus_debug_output_1): Use
pulongest instead of "%lld".
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol): Remove
ATTRIBUTE_UNUSED.
An IR object may have an unknown architecture. But it is compatible
with other architecture.
PR ld/23600
* archures.c (bfd_arch_get_compatible): Allow an IR object with
unknown architecture.
gdb represents a DW_TAG_variant_part as a union. While normally DWARF
would not set the size of a DW_TAG_variant_part, gdb's representation
requires the TYPE_LENGTH to be set.
This patch arranges to set the TYPE_LENGTH of a variant part if it has
not already been set.
This fixes some Rust regressions when testing against a version of
rustc that emits DW_TAG_variant_part.
gdb/ChangeLog
2018-08-31 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_add_field): Set the TYPE_LENGTH of the
variant part type.
I noticed that gdb.rust/simple.rs had two local variables named "v".
This didn't previous cause problems, but with a newer rust compiler
this resulted in a test failure. (It should have failed all along, so
I suppose earlier passes were due to a compiler bug.)
This patch renames the second variable.
gdb/testsuite/ChangeLog
2018-08-31 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs: Rename second variable "v".
The previous commit included a stale gdbarch.h from an earlier version
of that patch by mistake.
gdb/ChangeLog:
2018-08-31 Pedro Alves <palves@redhat.com>
* gdbarch.h: Regenerate.
target_have_continuable_watchpoint isn't used anywhere so remove it.
The property isn't necessary because checking for "continuable" is the
same as checking for "!steppable && !non-steppable".
gdb/ChangeLog:
2018-08-31 Pedro Alves <palves@redhat.com>
* nto-procfs.c (nto_procfs_target::have_continuable_watchpoint):
Delete.
* s390-linux-nat.c
(s390_linux_nat_target::have_continuable_watchpoint): Delete.
* target.h (target_ops::have_continuable_watchpoint): Delete.
(target_have_continuable_watchpoint): Delete.
* x86-nat.h (x86_nat_target::have_continuable_watchpoint): Delete.
* target-delegates.c: Regenerate.
We will get an XPASS when h8300 port peculiarities are fixed, and will
fix the testsuite too.
* testsuite/gas/elf/section14.d: Change skip to xfail.
* testsuite/lib/gas-defs.exp (run_dump_test): Add xfail support.
When there are more than one input sections with the same section name,
SECNAME, linker picks the first one to define __start_SECNAME and
__stop_SECNAME symbols. When the first input section is removed by
comdat group, we need to check if there is still an output section
with section name SECNAME.
PR ld/23591
* ldlang.c (undef_start_stop): Lookup section in output with
the same name.
* testsuite/ld-elf/pr23591.d: New file.
* testsuite/ld-elf/pr23591a.s: Likewise.
* testsuite/ld-elf/pr23591b.s: Likewise.
* testsuite/ld-elf/pr23591c.s: Likewise.
It was pointed by Pedro that gnulib/Makefile.in should be updated
accordingly after our local gnulib is also updated. The specific part
that needs to be refreshed is the "aclocal_m4_deps" variable, which
lists the .m4 files present under the "gnulib/import/m4/" directory.
This patch does that.
No regressions introduced.
gdb/ChangeLog:
2018-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gnulib/Makefile.in (aclocal_m4_deps): Update according to
the files present in "gnulib/import/m4/".
This patch uses the newly defined high-part REL16 relocs to emit
relocations on the notoc stubs as we already do for other stubs.
* elf64-ppc.c (num_relocs_for_offset): New function.
(emit_relocs_for_offset): New function.
(use_global_in_relocs): New function, split out from..
(ppc_build_one_stub): ..here. Output relocations for notoc stubs.
(ppc_size_one_stub): Calculate reloc count for notoc stubs.
(ppc64_elf_size_stubs): Don't count undefined syms in stub_globals.
This patch rearranges ppc_size_one_stub to make it a little easier to
compare against ppc_build_one_stub, and makes a few other random
changes that might help for future maintenance. There should be no
functional changes here.
The patch also fixes code examples in comments. A couple of "ori"
instructions lacked the source register operand, and "@high" is the
correct reloc modifier to use in a sequence building a 64-bit value.
(@hi reports overflow of a 32-bit signed value.)
* elf64-ppc.c: Correct _notoc stub comments.
(ppc_build_one_stub): Simplify output of branch for notoc
long branch stub. Don't include label offset of 8 bytes in
"off" calculation for notoc plt stub. Don't emit insns to get pc.
(build_offset): Emit insns to get pc here instead.
(size_offset): Add 4 extra insns.
(plt_stub_size): Adjust for "off" and size_offset changes.
(ppc_size_one_stub): Rearrange code into a switch, duplicating
some to better match ppc_build_one_stub.
Pass -z separate-code to ld for property-x86-4a tests to generate
the expected .note.gnu.property section. Also run i386 tests for
x86_64-*-elf* targets.
* testsuite/ld-i386/i386.exp: Also run for x86_64-*-elf* targets.
* testsuite/ld-i386/property-x86-4a.d: Pass -z separate-code to
ld.
* testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
Since x86 assembler may generate .note.gnu.property section and S-records
can't handle .note.gnu.property sections, add -mx86-used-note=no to
S-records tests on ELF/x86 targets to avoid .note.gnu.property section.
* testsuite/ld-srec/srec.exp: Append -Wa,-mx86-used-note=no to
CC and CXX on ELF/x86 targets.
Since x86 assembler may generate .note.gnu.property section, pass
-mx86-used-note=no to assembler for section2 test on ELF/x86 targets
to avoid .note.gnu.property section.
* testsuite/gas/elf/elf.exp: Pass -mx86-used-note=no to
assembler for section2 test on ELF/x86 targets.
Since cfi/cfi-label.d is ELF/x86 specific, we can pass -mx86-used-note=no
to assembler.
* testsuite/gas/cfi/cfi-label.d: Pass -mx86-used-note=no to
assembler.
Since x86 assembler may generate .note.gnu.property section, adjust
binutils tests to handle it.
* testsuite/binutils-all/readelf.s-64: Adjusted for
.note.gnu.property section.
* testsuite/binutils-all/strip-3.d: Also strip
.note.gnu.property section.
Add -mx86-used-note=[yes|no] option to generate (or not) GNU property
notes with GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_ISA_1_USED
properties. If the assembly input contains no instructions, set the
GNU_PROPERTY_X86_UINT32_VALID bit in GNU_PROPERTY_X86_FEATURE_2_USED
property. Add a --enable-x86-used-note configure time option to set the
default behavior. Set the default if the configure option is not used
to "no".
* NEWS: Mention -mx86-used-note=[no|yes].
* configure.ac: Add --enable-x86-used-note. Define
DEFAULT_X86_USED_NOTE.
* config.in: Regenerated.
* configure: Likewise.
* config/tc-i386.c (x86_isa_1_used): New.
(x86_feature_2_used): Likewise.
(x86_used_note): Likewise.
(_i386_insn): Add has_regmmx, has_regxmm, has_regymm and
has_regzmm.
(build_modrm_byte): Set i.has_regmmx, i.has_regzmm.
i.has_regymm and i.has_regxmm.
(x86_cleanup): New function.
(output_insn): Update x86_isa_1_used and x86_feature_2_used.
(OPTION_X86_USED_NOTE): New.
(md_longopts): Add -mx86-used-note=.
(md_parse_option): Handle OPTION_X86_USED_NOTE.
(md_show_usage): Display -mx86-used-note=.
* config/tc-i386.h (x86_cleanup): New prototype.
(md_cleanup): New.
* doc/c-i386.texi: Document -mx86-used-note=.
2018-08-29 Kito Cheng <kito@andestech.com>
gas/
* config/tc-riscv.c (riscv_subset_supports): New argument:
xlen_required.
(riscv_multi_subset_supports): New function, able to check more
than one extension.
(riscv_ip): Use riscv_multi_subset_supports instead of
riscv_subset_supports.
(riscv_set_arch): Update call-site for riscv_subset_supports.
(riscv_after_parse_args): Likewise.
include/
*opcode/riscv.h (MAX_SUBSET_NUM): New.
(riscv_opcode): Add xlen_requirement field and change type of
subset.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
Skip elf/section14 test for h8300 targets since the h8300 port issues a
warning message for new sections created without atrributes.
* testsuite/gas/elf/section14.d: Skip h8300 targets.
Extends the instruction decoder used during prologue scan and software
single step to cover more instructions. These instructions are
encountered when running the current GDB testsuite with the DWARF
stack unwinders turned off.
gdb/ChangeLog:
* riscv-tdep.c (riscv_insn::decode): Decode c.addi4spn, c.sd,
c.sw, c.swsp, and c.sdsp.
The RISC-V had a mechanism in place to cache the contents of the misa
register per-inferior, the original intention behind this was to
reduce the number of times the misa register had to be read (as the
contents should be constant), but it was pointed out on the mailing
list[1] that the register cache will mean the register is only
accessed once each time GDB stops, and any additional caching is
probably just unneeded extra complexity.
As such, until it can be shown that there's a real need for additional
caching, this commit removes all of the additional caching of the misa
register, and just accesses the misa register like a normal register.
[1] https://sourceware.org/ml/gdb-patches/2018-03/msg00136.html
gdb/ChangeLog:
* riscv-tdep.c (struct riscv_inferior_data): Delete.
(riscv_read_misa_reg): Don't cache value read into inferior data.
(riscv_new_inferior_data): Delete.
(riscv_inferior_data_cleanup): Delete.
(riscv_inferior_data): Delete.
(riscv_invalidate_inferior_data): Delete.
(_initialize_riscv_tdep): Remove initialisation of inferior data.
In the test gdb.base/funcargs.exp, there's this function:
void recurse (SVAL a, int depth)
{
a.s = a.i = a.l = --depth;
if (depth == 0)
hitbottom ();
else
recurse (a, depth);
}
The test script places a breakpoint in hitbottom, and runs the
executable which calls recurse with an initial depth of 4.
When GDB hits the breakpoint in hitbottom the testscript performs a
backtrace, and examines 'a' at each level.
The problem is that 'a' is not live after either the call to
'hitbottom' or the call to 'recurse', and as a result the test fails.
In the particular case I was looking at GCC for RISC-V 32-bit, the
variable 'a' is on the stack and GCC selects the register $ra (the
return address register) to hold the pointer to 'a'. This is fine,
because, by the time the $ra register is needed to hold a return
address (calling hitbottom or recurse) then 'a' is dead.
In this patch I propose that a use of 'a' is added after the calls to
hitbottom and recurse, this should cause the compiler to keep 'a'
around, which should ensure GDB can find it.
gdb/testsuite/ChangeLog:
* gdb.base/funcargs.c (use_a): New function.
(recurse): Call use_a.
I see these errors when building with clang:
CXX compile/compile-cplus-types.o
/home/emaisin/src/binutils-gdb/gdb/compile/compile-cplus-types.c:306:56: error: cannot pass non-trivial object of type 'compile_scope' to variadic function; expected type from format string was 'void *' [-Wnon-pod-varargs]
fprintf_unfiltered (gdb_stdlog, "leaving scope %p\n", current);
~~ ^~~~~~~
/home/emaisin/src/binutils-gdb/gdb/compile/compile-cplus-types.c:1058:13: error: comparison of two values with different enumeration types ('enum_flags<gcc_cp_qualifiers>::enum_type' (aka 'gcc_cp_qualifiers') and 'gcc_cp_ref_qualifiers') [-Werror,-Wenum-compare]
if (quals != GCC_CP_REF_QUAL_NONE)
~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~
Fix the first one by using host_address_to_string.
Fix the second one by comparing to 0 instead. I think the current
comparison simply uses the wrong enum type. Comparing to 0 seems like
the right thing to do, because we want to check whether any flags are
specified.
gdb/ChangeLog:
* compile/compile-cplus-types.c
(compile_cplus_instance::leave_scope): Take the address of scope
object.
(compile_cplus_instance::convert_qualified_base): Compare quals
to 0.
Since SHT_FINI_ARRAY and SHT_PREINIT_ARRAY sections are relocatable,
this patch fixes readelf and adds a testcase.
binutils/
* readelf.c (process_section_headers): Treat SHT_FINI_ARRAY and
SHT_PREINIT_ARRAY as relocatable sections.
gas/
* testsuite/gas/elf/elf.exp: Run section14.
* testsuite/gas/elf/section14.d: New file.
* testsuite/gas/elf/section14.s: Likewise.
This patch fixes a problem being reported by the buildbot with an
invalid argument to a "%p" printf format. Instead of "%p", the
debug output is changed to use "%s" and host_address_to_string.
gdb/ChangeLog
* compile/compile-cplus-types.c (compile_cplus_instance::enter_scope):
Use "%s" and host_address_to_string instead of "%p" in printf.
This patch adds *basic* support for C++ to the compile feature. It does
most simple type conversions, including everything that C compile does and
your basic "with-classes" type of C++.
I've written a new compile-support.exp support file which adds a new test
facility for automating and simplifying "compile print" vs "compile code"
testing. See testsuite/lib/compile-support.exp and CompileExpression
for more on that. The tests use this facility extensively.
This initial support has several glaring omissions:
- No template support at all
I have follow-on patches for this, but they add much complexity
to this "basic" support. Consequently, they will be submitted separately.
- Cannot print functions
The code template needs tweaking, and I simply haven't gotten to it yet.
- So-called "special function" support is not included
Using constructors, destructors, operators, etc will not work. I have
follow-on patches for that, but they require some work because of the
recent churn in symbol searching.
- There are several test suite references to "compile/1234" bugs.
I will file bugs and update the test suite's bug references before pushing
these patches.
The test suite started as a copy of the original C-language support, but
I have written tests to exercise the basic functionality of the plug-in.
I've added a new option for outputting debug messages for C++ type-conversion
("debug compile-cplus-types").
gdb/ChangeLog:
* Makefile.in (SUBDIR_GCC_COMPILE_SRCS): Add compile-cplus-symbols.c
and compile-cplus-types.c.
(HFILES_NO_SRCDIR): Add gcc-cp-plugin.h.
* c-lang.c (cplus_language_defn): Set C++ compile functions.
* c-lang.h (cplus_get_compile_context, cplus_compute_program):
Declare.
* compile/compile-c-support.c: Include compile-cplus.h.
(load_libcompile): Templatize.
(get_compile_context): "New" function.
(c_get_compile_context): Use get_compile_context.
(cplus_get_compile_context): New function.
(cplus_push_user_expression, cplus_pop_user_expression)
(cplus_add_code_header, cplus_add_input, cplus_compile_program)
(cplus_compute_program): Define new structs/functions.
* compile/compile-cplus-symmbols.c: New file.
* compile/compile-cplus-types.c: New file.
* compile/compile-cplus.h: New file.
* compile/compile-internal.h (debug_compile_oracle, GCC_TYPE_NONE):
Declare.
* compile/compile-object-load.c (get_out_value_type): Use
strncmp_iw when comparing symbol names.
(compile_object_load): Add mst_bss and mst_data.
* compile/compile.c (_initialize_compile): Remove
-Wno-implicit-function-declaration from `compile_args'.
* compile/gcc-cp-plugin.h: New file.
* NEWS: Mention C++ compile support and new debug options.
gdb/testsuite/ChangeLog:
* gdb.compile/compile-cplus-anonymous.cc: New file.
* gdb.compile/compile-cplus-anonymous.exp: New file.
* gdb.compile/compile-cplus-array-decay.cc: New file.
* gdb.compile/compile-cplus-array-decay.exp: New file.
* gdb.compile/compile-cplus-inherit.cc: New file.
* gdb.compile/compile-cplus-inherit.exp: New file.
* gdb.compile/compile-cplus-member.cc: New file.
* gdb.compile/compile-cplus-member.exp: New file.
* gdb.compile/compile-cplus-method.cc: New file.
* gdb.compile/compile-cplus-method.exp: New file.
* gdb.compile/compile-cplus-mod.c: "New" file.
* gdb.compile/compile-cplus-namespace.cc: New file.
* gdb.compile/compile-cplus-namespace.exp: New file.
* gdb.compile/compile-cplus-nested.cc: New file.
* gdb.compile/compile-cplus-nested.exp: New file.
* gdb.compile/compile-cplus-print.c: "New" file.
* gdb.compile/compile-cplus-print.exp: "New" file.
* gdb.compile/compile-cplus-virtual.cc: New file.
* gdb.compile/compile-cplus-virtual.exp: New file.
* gdb.compile/compile-cplus.c: "New" file.
* gdb.compile/compile-cplus.exp: "New" file.
* lib/compile-support.exp: New file.
doc/ChangeLog:
* gdb.texinfo (Compiling and injecting code in GDB): Document
set/show "compile-oracle" and "compile-cplus-types" commands.
This patch adds a new symbol searching API based on linespec.c's parser
implementation. This allows users to find "all* matching symbols instead
of the first found match (a la lookup_symbol).
gdb/ChangeLog:
* linespec.c (collect_info::add_symbol): Make virtual.
(struct symbol_searcher_collect_info): New struct.
(symbol_searcher::find_all_symbols): New method.
* symtab.h (class symbol_searcher): New class.
This patch changes the linespec.c APIs to use block_symbol instead of just
a symbol. lookup_symbol et al already return block_symbol's.
gdb/ChangeLog:
* linespec.c (struct linespec) <function_symbols, label_symbols>:
Change to vector of block_symbol. Update all users.
(struct collect_info) <symbols>: Likewise.
(collect_info::add_symbol): Take block_symbol as argument.
Update all callers.
(decode_compound_collector) <m_symbols>: Change type to vector
of block_symbol. Update all users.
(decode_compound_collector::operator ()): Change parameter type
to block_symbol.
(find_method, find_function_symbols, find_linespec_symbols)
(find_label_symbols_in_block, find_label_symbols): Change symbol
vectors to block_symbol vectors.
* symtab.h (symbol_found_callback_ftype): Change parameter type to
block_symbol.
Since they are now no longer necessary, this patch removes the typedefs
and VEC definitions for bound_minimal_symbol_d and symbolp.
gdb/ChangeLog:
* linespec.c (symbolp): Remove typedef and VEC definitions.
(bound_minimal_symbol_d): Likewise.
This patch changes decode_compound_collector to use std::vector instead of
VEC, eliminating a cleanup in the process.
gdb/ChangeLog:
* linespec.c (decode_compound_collector::decode_compound_collector):
Remove initialization for `m_symtabs'.
(decode_compound_collector::release_symbols): Change return type
to std::vector. Update all callers.
(class decode_compound_collector) <m_symbols>: Change type to
std::vector.
(lookup_prefix_sym): Change return type to std::vector. Update all
callers.
(compare_symbols): Remove.
(std_compare_symbols): Rename to `compare_symbols'.
(find_method): Change `sym_classes' parameter to std::vector.
Update all callers. Use std::sort to sort sym_classes.
(find_linespec_symbols): Remove cleanup.
GDB Administrator
Nick Clifton
Andrew Burgess
Jozef Lawrynowicz
Alan Modra
Keith Seitz
H.J. Lu
Jim Wilson
Tom Tromey
Pedro Alves
Sergio Durigan Junior
Jose E. Marchesi
Simon Marchi
Chenghua Xu