7ca01ed925
* ld.texinfo: Replace @ with @@ when it is part of the text.
...
Correct ordering of M68HC11 entry.
* doc/binutils.texi: Fix ordering of top level nodes.
Replace erroneous uses of @itemx with @item.
* bfd.texinfo: Replace @ with @@ when it is part of the text.
2013-01-07 12:11:13 +00:00
e407c74b5b
* archures.c: Add support for MIPS r5900
...
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2013-01-04 17:22:53 +00:00
6265840747
Update copyright year to 2013
...
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
2013-01-02 17:15:38 +00:00
4e5f3f9d1d
Rotate binutils ChangeLog for 2013
2013-01-02 17:06:32 +00:00
9d5777a34c
ld/
...
* ld.texinfo (Options): Describe -Trodata-segment.
* ldlex.h (enum option_values): Add OPTION_TRODATA_SEGMENT.
* lexsup.c (ld_options, parse_args): Handle -Trodata-segment.
* scripttempl/elf.sc (RODATA_ADDR, SHLIB_RODATA_ADDR): Wrap
SEGMENT_START("rodata-segment", ...) + SIZEOF_HEADERS around the value.
2012-12-18 20:42:43 +00:00
5bf135a788
Add copyright notices
2012-12-17 16:56:12 +00:00
4194268f43
PR ld/14962
...
* ldexp.h (struct ldexp_control): Add "assign_name".
* ldexp.c (fold_name <NAME>): Compare and clear assign_name on match.
(exp_fold_tree_1): Remove existing code testing for self assignment.
Instead set and test expld.assign_name.
* ldlang.c (scan_for_self_assignment): Delete.
(print_assignment): Instead set and test expld.assign_name.
2012-12-17 00:16:49 +00:00
8634c1b4cb
ld/
...
* emulparams/elf_nacl.sh (nacl_rodata_addr): New shell function.
(RODATA_ADDR, SHLIB_RODATA_ADDR): Use it to base the calculation
on SEGMENT_START("text-segment", ...) rather than ... alone.
* Makefile.am (earmelf_nacl.c, earmelfb_nacl.c): Add missing
dependency on $(srcdir)/emulparams/elf_nacl.sh.
* Makefile.in: Regenerate.
2012-12-11 22:23:14 +00:00
752937aa0c
Add copyright notices
2012-12-10 12:48:03 +00:00
8fbb09e83e
Extend --copy-dt-needed-entries to creating DSO
...
ld/
PR ld/14915
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Also
check DT_NEEDED entries when creating shared object with
--copy-dt-needed-entries.
ld/testsuite/
PR ld/14915
* ld-elf/shared.exp (build_tests): Test --add-needed,
--copy-dt-needed-entries, --no-add-needed and
--no-copy-dt-needed-entries with -shared.
Add tests for --no-add-needed and --no-copy-dt-needed-entries
with -shared.
2012-12-06 00:25:19 +00:00
79056107ed
Add x86_64-*-rdos.
2012-12-05 05:48:19 +00:00
d82184d782
Improve plugin error handling
...
ld/
PR ld/14904
* ldmain.c (main): Don't check plugin_load_plugins return.
* lexsup.c (parse_args): Don't check plugin_opt_plugin return.
* plugin.c (dlerror): New. Defined if HAVE_DLFCN_H isn't
defined.
(plugin_opt_plugin): Change return type to void. Stop on
dlopen error and report error with dlerror ().
(plugin_load_plugins): Change return type to void. Stop on
dlsym error and report error with dlerror (). Don't use
set_plugin_error.
(plugin_call_cleanup): Issue an error for each plugin.
* plugin.h (plugin_opt_plugin): Change return type to void.
(plugin_load_plugins): Likewise.
ld/testsuite/
PR ld/14904
* ld-plugin/plugin-2.d: Update expected error message.
* ld-plugin/plugin-4.d: Likewise.
2012-12-03 14:34:06 +00:00
f204ddb8a8
* scripttempl/epiphany_4x4.sc, emulparams/elf32epiphany_4x4.sh: Add.
...
* emultempl/epiphanyelf_4x4.em: Likewise.
* configure.tgt: Add elf32epiphany_4x4 support.
* Makefile.am: Likewise.
* Makefile.in: Regenerate.
2012-11-30 18:28:38 +00:00
e63962bcf0
* Makefile.in: Regenerate.
2012-11-29 11:03:13 +00:00
11e7fd744a
PR ld/14776
...
* ld.texinfo: Fix spelling mistakes.
2012-11-27 17:04:30 +00:00
e2caaa1f59
ld/
...
* emultempl/aarch64elf.em (gld${EMULATION_NAME}_before_parse):
Copy last elf32.em here too.
* emultempl/armelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/mmixelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/scoreelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
2012-11-26 23:26:35 +00:00
4724d37ec2
ld/
...
* ld.h (ld_config_type): New flag member separate_code.
* emultempl/elf32.em
(gld${EMULATION_NAME}_before_parse): Set it based on $SEPARATE_CODE.
* ldlang.c (ldlang_override_segment_assignment): If it's set, then
always return TRUE when SEC_CODE differs between the sections.
2012-11-21 19:56:38 +00:00
b039ef0457
Implement ELF linker -z global option
...
ld/
* ld.texinfo: Document "-z global".
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Support
"-z global".
(gld${EMULATION_NAME}_list_options): Likewise.
ld/testsuite/
* ld-elf/global1.d: New file.
2012-11-20 22:16:05 +00:00
3d3163562c
Fix typo.
2012-11-16 04:01:14 +00:00
507dcd87bd
Port lib32 arangement from Debian.
...
* emulparams/elf_i386.sh: Include lib32 directories in library search
path.
2012-11-16 04:00:41 +00:00
24a0971372
* ldmain.c (main): Add start_sbrk set to sbrk(0) on entry.
...
On exit, compute data size as the delta between current
sbrk(0) and start_sbrk.
2012-11-15 10:49:02 +00:00
de863c7475
2012-11-09 Nick Clifton <nickc@redhat.com>
...
* Makefile.am (ALL_MACHINES): Add cpu-v850-rh850.lo.
(ALL_MACHINES_CFILES): Add cpu-v850-rh850.c.
* archures.c (bfd_arch_info): Add bfd_v850_rh850_arch.
* config.bfd: Likewise.
* configure.in: Add bfd_elf32_v850_rh850_vec.
* cpu-v850.c: Update printed description.
* cpu-v850_rh850.c: New file.
* elf32-v850.c (v850_elf_check_relocs): Add support for RH850 ABI
relocs.
(v850_elf_perform_relocation): Likewise.
(v850_elf_final_link_relocate): Likewise.
(v850_elf_relocate_section): Likewise.
(v850_elf_relax_section): Likewise.
(v800_elf_howto_table): New.
(v850_elf_object_p): Add support for RH850 ABI values.
(v850_elf_final_write_processing): Likewise.
(v850_elf_merge_private_bfd_data): Likewise.
(v850_elf_print_private_bfd_data): Likewise.
(v800_elf_reloc_map): New.
(v800_elf_reloc_type_lookup): New.
(v800_elf_reloc_name_lookup): New.
(v800_elf_info_to_howto): New.
(bfd_elf32_v850_rh850_vec): New.
(bfd_arch_v850_rh850): New.
* targets.c (_bfd_targets): Add bfd_elf32_v850_rh850_vec.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* readelf.c (get_machine_flags): Add support for E_FLAG_RX_ABI.
(guess_is_rela): Add EM_V800.
(dump_relocations): Likewise.
(get_machine_name): Update EM_V800.
(get_machine_flags): Add support for RH850 ABI flags.
(is_32bit_abs_reloc): Add support for RH850 ABI reloc.
* config/tc-v850.c (v850_target_arch): New.
(v850_target_format): New.
(set_machine): Use v850_target_arch.
(md_begin): Likewise.
(md_show_usage): Document new switches.
(md_parse_option): Add -mgcc-abi, -mrh850-abi, -m8byte-align and
-m4byte-align.
* config/tc-v850.c (TARGET_ARCH) Use v850_target_arch.
(TARGET_FORMAT): Use v850_target_format.
* doc/c-v850.texi: Document new options.
* v850.h: Add RH850 ABI values.
* Makefile.am: (ALL_EMULATION_SOURCES): Add ev850_rh850.c.
* Makefile.in: Regenerate.
* configure.tgt (v850*-*-*): Make v850_rh850 the default
emulation. Add vanilla v850 as an extra emulation.
* emulparams/v850_rh850.sh: New file.
* scripttempl/v850_rh850.sc: New file.
* configure.in: Add bfd_v850_rh850_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Likewise.
2012-11-09 17:36:19 +00:00
708e2187a3
2012-11-09 Nick Clifton <nickc@redhat.com>
...
* elf32-rx.c (describe_flags): New function. Returns a buffer
containing a description of the E_FLAG_RX_... values set.
(rx_elf_merge_private_bfd_data): Use it.
(rx_elf_print_private_bfd_data): Likewise.
(elf32_rx_machine): Skip EF_RX_CPU_RX check.
(elf32_rx_special_sections): Define.
(elf_backend_special_sections): Define.
2012-11-09 Nick Clifton <nickc@redhat.com>
* readelf.c (get_machine_flags): Add support for E_FLAG_RX_ABI.
2012-11-09 Nick Clifton <nickc@redhat.com>
* config/obj-elf.c (obj_elf_change_section): Allow init array
sections to have the SHF_EXECINSTR attribute for the RX target.
* config/tc-rx.c (elf_flags): Initialise with E_FLAG_RX_ABI.
(enum options): Add OPTION_USES_GCC_ABI and OPTION_USES_RX_ABI.
(md_longopts): Add -mgcc-abi and -mrx-abi.
(md_parse_option): Add support for OPTION_USES_GCC_ABI and
OPTION_USES_RX_ABI.
* doc/as.texinfo (RX Options): Add mention of remaining RX
options.
* doc/c-rx.texi: Document -mgcc-abi and -mrx-abi.
2012-11-09 Nick Clifton <nickc@redhat.com>
* rx.h (EF_RX_CPU_RX): Add comment.
(E_FLAG_RX_ABI): Define.
2012-11-09 Nick Clifton <nickc@redhat.com>
* emultempl/rxelf.em (no_flag_mismatch_warnings): Initialise to
true.
(PARSE_AND_LIST_LONGOPTS): Add flag-mismatch-warnings.
(PARSE_AND_LIST_ARG_CASES): Add support for
--flag-mismatch-warnings.
2012-11-09 17:00:44 +00:00
f23200ada9
Add microblazeel target support to bfd, gas and ld.
...
binutils/bfd/Changelog
2012-11-09 Edgar E. Iglesias <edgar.iglesias@gmail.com>
* config.bfd: Add microblazeel-*-*
* configure.in: Likewise.
* configure: Regenerate.
* elf32-microblaze.c (microblaze_elf_relocate_section):
Add endian awareness.
(microblaze_elf_merge_private_bfd_data): New.
(microblaze_bfd_write_imm_value_32): New.
(microblaze_bfd_write_imm_value_64): New.
(microblaze_elf_relax_section): Add endian awareness.
(microblaze_elf_add_symbol_hook): Define TARGET_LITTLE_NAME,
TARGET_LITTLE_SYM and bfd_elf32_bfd_merge_private_bfd_data.
* targets.c: Add bfd target bfd_elf32_microblazeel_vec.
binutils/gas/Changelog
2012-11-09 Edgar E. Iglesias <edgar.iglesias@gmail.com>
* tc-microblaze.c (md_longopts): Define OPTION_EB and
OPTION_EL for target.
(md_parse_option): Likewise.
* tc-microblaze.h: Set elf32-microblazeel if not
target_big_endian for TARGET_FORMAT.
* configure.tgt: Add microblazeel and set endian per target.
binutils/gas/testsuite/Changelog
2012-11-09 David Holsgrove <david.holsgrove@xilinx.com>
* gas/microblaze/endian.exp: New file - endian
testcase for microblaze / microblazeel.
* gas/microblaze/endian.s: Likewise.
* gas/microblaze/endian_be.d: Likewise.
* gas/microblaze/endian_le.d: Likewise.
* gas/microblaze/endian_le_elf.d: Likewise.
* gas/microblaze/reloc_sym.d: Update to accept targets
other than elf32-microblaze.
* gas/microblaze/special_reg.d: Likewise.
binutils/ld/Changelog
2012-11-09 Edgar E. Iglesias <edgar.iglesias@gmail.com>
* Makefile.am: Add eelf32microblazeel.c and eelf32mbel_linux.c.
* Makefile.in: Regenerated.
* configure.tgt: Add microblazeel and set endian per target.
* emulparams/elf32mb_linux.sh: Add OUTPUT_FORMAT.
* emulparams/elf32microblaze.sh: Likewise.
* emulparams/elf32mbel_linux.sh: New file.
* emulparams/elf32microblazeel.sh: Likewise.
2012-11-09 16:25:12 +00:00
5bb3703f01
Remove trailing redundant `;'
...
bfd/
* aout-tic30.c (MY_final_link_callback): Remove trailing
redundant `;'.
* coff-h8500.c (extra_case): Likewise.
(bfd_coff_reloc16_get_value): Likewise.
* dwarf2.c (_bfd_dwarf2_cleanup_debug_info): Likewise.
* elf.c (_bfd_elf_slurp_version_tables): Likewise.
* elf32-frv.c (elf32_frv_relocate_section): Likewise.
* elf32-v850.c (v850_elf_perform_relocation): Likewise.
* opncls.c (bfd_calc_gnu_debuglink_crc32): Likewise.
* plugin.c (add_symbols): Likewise.
* reloc.c (bfd_check_overflow): Likewise.
* vms-lib.c (_bfd_vms_lib_archive_p): Likewise.
binutils/
* coffgrok.c (coff_grok): Remove trailing redundant `;'.
* resrc.c (open_input_stream): Likewise.
gas/
* config/atof-ieee.c (gen_to_words): Remove trailing redundant
`;'.
* config/atof-vax.c (flonum_gen2vax): Likewise.
* config/tc-d10v.c (write_2_short): Likewise.
* config/tc-i386-intel.c (i386_intel_simplify): Likewise.
* config/tc-s390.c (tc_s390_force_relocation): Likewise.
* config/tc-v850.c (md_parse_option): Likewise.
* config/tc-xtensa.c (find_address_of_next_align_frag): Likewise.
* dwarf2dbg.c (out_header): Likewise.
* symbols.c (dollar_label_name): Likewise.
(fb_label_name): Likewise.
ld/
* testplug.c (record_add_file): Remove trailing redundant `;'.
opcodes/
* aarch64-opc.h (gen_mask): Remove trailing redundant `;'.
* ia64-gen.c (fetch_insn_class): Likewise.
2012-11-09 08:29:34 +00:00
d17dce5567
* configure.in: Apply 2012-09-10 change to config.in here.
2012-11-05 10:45:32 +00:00
07e15f8731
* emultempl/elf32.em: Print stacksize help.
2012-11-01 14:26:47 +00:00
aa4c331959
* ldlang.c (insert_pad): Correct output section size calculation.
...
(lang_size_sections_1): Likewise for lang_data_statement and
lang_reloc_statement.
2012-11-01 04:15:07 +00:00
ce23608fa2
binutils/
...
* dlltool.c (INIT_SEC_DATA): Move.
(secdata <DLLTOOL_PPC>): Use here too.
binutils/testsuite/
* binutils-all/copy-3.d: Exclude all cygwin and mingw targets,
and rs6000.
gas/
* config/tc-ppc.c (ppc_znop): Remove unused vars.
ld/
* configure.tgt (powerpcle-pe,winnt,cygwin): Add deffilep.o
and pe-dll.o.
2012-10-29 10:09:34 +00:00
4f9d22a0b1
Move disable_target_specific_optimizations to bfd_link_info
...
include/
* bfdlink.h (bfd_link_info): Add
disable_target_specific_optimizations.
ld/
* ld.h (command_line): Remove
disable_target_specific_optimizations.
(RELAXATION_DISABLED_BY_DEFAULT): Removed.
(RELAXATION_DISABLED_BY_USER): Likewise.
(RELAXATION_ENABLED): Likewise.
(DISABLE_RELAXATION): Likewise.
(ENABLE_RELAXATION): Likewise.
* ldmain.c (main): Updated.
* ldmain.h (RELAXATION_DISABLED_BY_DEFAULT): New macro.
(RELAXATION_DISABLED_BY_USER): Likewise.
(RELAXATION_ENABLED): Likewise.
(DISABLE_RELAXATION): Likewise.
(ENABLE_RELAXATION): Likewise.
2012-10-24 11:09:28 +00:00
04c3a75556
bfd/
...
* bfd-in.h (bfd_elf_stack_segment_size): Declare.
* bfd-in2.h: Rebuilt.
* elfxx-target.h (elf_backend_stack_align): New.
(elfNN_bed): Add it.
* elf-bfd.h (struct elf_backend_data): Add stack_align field.
* elf.c (bfd_elf_map_sections_to_segments): Pay attention to
stack_align and stacksize for PT_GNU_STACK segment.
(assign_file_positions_for_non_load_sections): Set p_memsz for
PT_GNU_STACK segment.
(copy_elf_program_header): Copy PT_GNU_STACK size.
* elflink.c (bfd_elf_stack_segment_size): New function, taken from
uclinux backends.
(bfd_elf_size_dynamic_sections): Determine
PT_GNU_STACK requirements after calling backend. Pay attention to
stacksize.
* elf32-bfin.c (elf32_bfinfdpic_always_size_sections): Call
bfd_elf_stack_segment_size.
(elf32_bfinfdpic_modify_program_headers): Delete.
(elf32_bfingfdpic_copy_private_bfd_data): Don't copy PT_GNU_STACK
here.
(elf_backend_stack_align): Override.
(elf_backend_modify_program_headers): Don't override.
* elf32-frv.c (frvfdpic_always_size_sections): Call
bfd_elf_stack_segment_size.
(elf32_frvfdpic_modify_program_headers): Delete.
(elf32_frvfdpic_copy_private_bfd_data): Don't copy PT_GNU_STACK
here.
(elf_backend_stack_align): Override.
(elf_backend_modify_program_headers): Don't override.
* elf32-lm32.c (lm32_elf_always_size_sections): Leave
PT_GNU_STACK creation to underlying elf support. Check
__stacksize here for backwards compatibility, and set it if
needed.
(lm32_elf_modify_segment_map): Delete.
(lm32_elf_modify_program_headers): Delete.
(elf_backend_stack_align): Override.
(elf_backend_modify_segment_map): Don't override.
(elf_backend_modify_program_headers): Don't override.
* elf32-sh.c (sh_elf_always_size_sections): Call
bfd_elf_stack_segment_size.
(sh_elf_modify_program_headers): Delete.
(sh_elf_copy_private_data): Don't copy PT_GNU_STACK
here.
(elf_backend_stack_align): Override.
(elf_backend_modify_program_headers): Don't override.
* elf32-tic6x.c (elf32_tic6x_always_size_sections): Call
bfd_elf_stack_segment_size.
(elf32_tic6x_modify_program_headers): Delete.
(elf32_tic6x_copy_private_data): Delete.
(elf_backend_stack_align): Override.
(bfd_elf32_bfd_copy_private_bfd_data): Don't override.
(elf_backend_modify_program_headers): Don't override.
include/
* bfdlink.h (struct bfd_link_info): Add stacksize option.
ld/
* ld.texinfo (stack-size): New option.
* emultempl/elf32.em: Add stack-size option.
ld/testsuite/
* ld-elf/binutils.exp: Add -z stack-size=0.
* ld-elf/elf.exp: Add stack-exec and stack-size tests.
* ld-elf/orphan-region.d: Add stack-size option. Remove xfail.
* ld-elf/stack-exec.rd: New.
* ld-elf/stack-size.rd: New.
* ld-elf/stack.s: New.
* ld-scripts/empty-aligned.d: Add stack-size option.
* ld-sh/fdpic-stack-set.d: New.
* ld-tic6x/shlib-1.rd: Remove __stacksize symbol.
* ld-tic6x/shlib-1b.rd: Likewise.
* ld-tic6x/shlib-1r.rd: Likewise.
* ld-tic6x/shlib-1rb.rd: Likewise.
* ld-tic6x/shlib-app-1.rd: Likewise.
* ld-tic6x/shlib-app-1b.rd: Likewise.
* ld-tic6x/shlib-app-1r.rd: Likewise.
* ld-tic6x/shlib-app-1rb.rd: Likewise.
* ld-tic6x/shlib-noindex.rd: Likewise.
* ld-tic6x/static-app-1.rd: Likewise.
* ld-tic6x/static-app-1b.rd: Likewise.
* ld-tic6x/static-app-1r.rd: Likewise.
* ld-tic6x/static-app-1rb.rd: Likewise.
2012-10-23 09:33:56 +00:00
0e86e20e04
include/
...
PR ld/14426
* bfdlink.h (bfd_link_info): Add ignore_hash.
ld/
PR ld/14426
* ldlex.h (option_values): Add OPTION_IGNORE_UNRESOLVED_SYMBOL.
* lexsup.c (parse_args): Likewise.
(ld_options): Describe --ignore-unresolved-symbol.
* ldmain.h (add_ignoresym): Declare.
* ldmain.c (add_ignoresym): New function, extracted from..
(undefined_symbol): ..here. Return if the symbol is in ignore_hash.
(constructor_callback): Don't use global link_info here.
(reloc_overflow): Likewise.
2012-10-22 13:33:49 +00:00
a8f9d13eda
* plugin.c (plugin_load_plugins): Warning fix.
2012-10-22 04:54:25 +00:00
a29a8af823
ChangeLog bfd
...
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* coff-i386.c (bfd_target): Add section flag SEC_EXCLUDE.
Allow BFD_COMPRESS and BFD_DECOMPRESS flags.
* coff-x86_64.c: Likewise.
* coffcode.h (DOT_ZDEBUG): New define.
(sec_to_styp_flags): Check for .zdebug.
(styp_to_sec_flags): Likewise.
* coffgen.c (make_a_section): Handle .debug_* section
compression/decompression flags.
* cofflink.c (mark_relocs): Ignore relocations
for a section, which isn't marked as used.
(_bfd_coff_link_input_bfd): Add support of compressed
debug sections.
* compress.c (decompress_contents): Loop as long
as there is input available and there is room for
output.
* bfd/pe-arm.c: Add .zdebug_ partial match entry.
* pe-i386.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c (_bfd_XXi_swap_aouthdr_out): Don't clear all
data-directories as this might destroy content.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator):
define as coff_find_nearest_line_discriminator.
* libcoff-in.h (coff_find_nearest_line_discriminator): New
* libcoff.h: Regenerated.
* coff-x86_64.c: Likewise.
* coffgen.c (coff_find_nearest_line_discriminator): New function.
prototype.
ChangeLog binutils
2012-10-18 Kai Tietz <ktietz@redhat.com>
* objdump.c (dump_bfd): Call dump headers after
call of slurp_symtab.
ChangeLog ld
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* NEWS: Menition new feature.
* scripttempl/pep.sc: Add zdebug sections.
* scripttempl/pe.sc: L
2012-10-18 17:42:29 +00:00
c76b75fd82
2012-09-19 Steve Ellcey <sellcey@mips.com>
...
* configure.tgt: Add mips*-mti-elf* target.
2012-09-19 20:14:26 +00:00
c05f749ea6
* ld.texinfo (Expression Section): Correct description of
...
conversions for a binary operation involving an absolute symbol
and a number.
2012-09-16 22:21:00 +00:00
5220435761
* configure: Regenerate.
2012-09-15 00:04:44 +00:00
e202fa84e7
Bi-endian patches for moxie
2012-09-13 22:24:51 +00:00
7c0e90d28c
* emulparams/elf32rx.sh (OTHER_READONLY_SECTIONS): Add W_* sections.
2012-09-12 21:28:04 +00:00
00716ab174
* config.in: Disable sanity check for kfreebsd.
2012-09-10 22:30:57 +00:00
6d2920c847
Regenerate binutils configure
...
bfd/
2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
binutils/
2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
etc/
2010-11-20 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.in (install-strip): New target.
gas/
2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
gold/
2012-09-09 Alan Modra <amodra@gmail.com>
* target.h (Target::gc_mark_symbol, do_gc_mark_symbol): New functions.
gprof/
2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
intl/
2010-06-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
PR bootstrap/44621
ld/
2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
libiberty/
2011-08-28 H.J. Lu <hongjiu.lu@intel.com>
* argv.c (dupargv): Replace malloc with xmalloc. Don't check
opcodes/
2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2012-09-10 17:00:44 +00:00
ffda88b480
* configure.tgt (powerpc-*-elf, et al): Define targ_extra_libpath.
...
Correct whitespace.
(powerpcle-*-elf, et al): Likewise. Correct targ_extra_emuls.
2012-09-10 14:35:07 +00:00
c008817b74
* configure.tgt (powerpc-*-elf, et al): Define targ64_extra_emuls
...
and targ64_extra_libpath.
(powerpcle-*-elf, et al): Likewise.
2012-09-10 09:59:07 +00:00
a9ae0bdaba
* emultempl/mmo.em (mmo_place_orphan): Rewrite to also attach
...
orphan sections to .data and .bss output sections, not just .text.
When giving up on finding a suitable output section, attach to any
output section other than .MMIX.reg_contents, if it exists.
* scripttempl/mmo.sc: Move output debug sections to just before
.MMIX.reg_contents. Add .gnu.attributes. Add new . = . NOP
assignments and move end-of-section provide-symbols after them
to force the end-of-section symbols to the address after orphan
placement. Add SORT_NONE to .init and .fini sections.
2012-09-09 16:30:40 +00:00
11cba4accf
Provide __executable_start for PIE
...
ld/
PR ld/14525
* scripttempl/elf.sc: Also provide __executable_start for PIE.
ld/testsuite/
PR ld/14525
* ld-elf/elf.exp: Run pr14525.
* ld-elf/pr14525.c: New.
* ld-elf/pr14525.out: Likewise.
2012-08-31 02:52:14 +00:00
ee8206a9d3
PR ld/14326
...
* scripttempl/pe.sc: Add _etext symbol.
2012-08-17 16:33:03 +00:00
63a79b61fd
Updated Ukranian translations.
2012-08-14 11:59:05 +00:00
a06ea96464
Add support for 64-bit ARM architecture: AArch64
2012-08-13 14:52:54 +00:00
3c892704a9
Updated Vietnamese translation.
2012-08-09 14:46:44 +00:00
a988325c24
* config/tc-i386.c (lex_got): Provide implementation for PE
...
format.
* gas/i386/secrel.s: Add test of <symbol>@SECREL32.
* gas/i386/secrel.d: Add expected disassembly.
* scripttempl/pe.sc (R_TLS): Add .tls$AAA and .tls$ZZZ.
* scripttempl/pep.sc (R_TLS): Add .tls$AAA and .tls$ZZZ.
* archive.c (_bfd_delete_archive_data): New function.
* libbfd-in.h (_bfd_delete_archive_data): Declare.
* libbfd.h: Rebuild.
* opncls.c (_bfd_delete_bfd): Call _bfd_delete_archive_data.
2012-08-07 13:47:19 +00:00
5125d2b040
Updated Ukranian and Japanese translations.
2012-08-07 10:37:31 +00:00
9e8082845f
ld/
...
* emulparams/elf32bmip.sh: Make _gp hidden.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32mipswindiss.sh: Likewise.
* scripttempl/mips.sc: Likewise.
ld/testsuite/
* ld-mips-elf/rel32-o32.d: Adjust section VMAs after the removal
of _gp from the global scope.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
2012-08-06 22:40:36 +00:00
eb8476a6e2
bfd/
...
* elflink.c (bfd_elf_record_link_assignment): Remove --defsym
symbols special case.
ld/
* ldexp.h (etree_union): Add defsym member to the assign member
structure.
(exp_assign): Add hidden argument to prototype.
* ldexp.c (exp_fold_tree_1): Use the defsym member to handle
--defsym symbols.
(exp_assop): Add defsym argument, initialize the defsym member
of the assign structure.
(exp_assign): Handle hidden symbols.
(exp_defsym): Update to use the defsym argument to exp_assop.
(exp_provide): Update to handle the defsym argument to exp_assop.
* ldlex.l (HIDDEN): New token.
* ldgram.y (HIDDEN): Likewise.
(assignment, section): Update calls to exp_assign.
* ldctor.c (ldctor_build_sets): Likewise.
* mri.c (mri_format): Likewise.
* ldlang.c (lang_insert_orphan, lang_leave_overlay): Likewise.
(open_input_bfds): Remove --defsym symbols special case.
* emultempl/beos.em (gld_${EMULATION_NAME}_set_symbols): Update
call to exp_assign.
* emultempl/pe.em (gld_${EMULATION_NAME}_set_symbols): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_set_symbols): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/xtensaelf.em (ld_xtensa_insert_page_offsets):
Likewise.
* ld.texinfo (Assigning Values to Symbols): Add HIDDEN.
(HIDDEN): New subsection.
2012-08-06 22:27:52 +00:00
c83ebfa0aa
Move testsuite entry to testsuite/ChangeLog
2012-08-01 16:01:17 +00:00
8fbf7334de
gas/ChangeLog:
...
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/dwarf2dbg.c (out_set_addr): Allow for non-constant value of
DWARF2_LINE_MIN_INSN_LENGTH
* gas/config/tc-ppc.c (ppc_dwarf2_line_min_insn_length): Declare
and initialize.
(md_apply_fix): Branch addr can be a multiple of 2 or 4.
* gas/config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): Now a
variable reference.
gas/testsuite/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/cfi/cfi-ppc-1.d: Allow for code alignment of 2 or 4.
ld/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* ld/testsuite/ld-gc/pr13683.d: XFAIL for powerpc*-*-eabivle.
2012-08-01 13:46:59 +00:00
c2821c3e55
Properly handle by_none
2012-08-01 01:07:38 +00:00
b2e4da5a83
Don't call compare_section in case of by_none
...
PR ld/14156
* ldlang.c (wild_sort): Don't call compare_section in case of
by_none.
* scripttempl/elf.sc: Add SORT_NONE to .init and .fini sections.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
2012-08-01 01:03:47 +00:00
a6dc81d2ab
Updated translations
2012-07-30 08:43:46 +00:00
c4dd807e7b
bfd: update to AC_INIT
...
Move the package name/version from AM_INIT_AUTOMAKE to AC_INIT per recent
autotools guidelines. We use recent versions of both, so it shouldn't be
a problem.
This sets PACKAGE_xxx variables correctly, and makes the output of:
./configure --version
actually useful:
bfd configure 2.22.52
Changing the other dirs to use AC_INIT would require a bit of m4 trickery
that I don't feel like getting into, and they all use BFD_VERSION anyways,
so there isn't much point.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-27 16:30:57 +00:00
af18cb5940
binutils/
...
2012-07-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.23.
gas/
2012-07-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.23.
ld/
2012-07-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.23.
2012-07-27 08:13:03 +00:00
43315eb701
2012-07-24 Jan Waclawek <konfera@efton.sk>
...
PR ld/14058
* emultempl/avrelf.em (avr_elf_after_allocation): Call
elf32_avr_size_stubs with is_prealloc_run as TRUE.
2012-07-24 22:23:21 +00:00
470b557aaf
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* elf64-s390.c: Include elf-s390-common.c.
(R_390_IRELATIVE): New reloc.
(elf_s390_reloc_type_lookup): Support R_390_IRELATIVE.
(RELA_ENTRY_SIZE): New macro.
(elf_s390_link_hash_entry): New fields ifunc_resolver_address and
*ifunc_resolver_section.
(struct plt_entry): New struct.
(struct elf_s390_obj_tdata): New field local_plt.
(elf_s390_local_plt): New macro.
(struct elf_s390_link_hash_table): New field irelifunc.
(ELF64): New macro.
(link_hash_newfunc): Initialize new fields.
(elf_s390_check_relocs): Handle IFUNC symbols.
(elf_s390_adjust_dynamic_symbol): Don't do anything for IFUNC
symbols.
(allocate_dynrelocs): Call s390_elf_allocate_ifunc_dyn_relocs for
IFUNC symbols.
(elf_s390_size_dynamic_sections): Handle IFUNC symbols.
(elf_s390_relocate_section): Likewise.
(elf_s390_finish_dynamic_symbol): Likewise.
(elf_s390_finish_dynamic_sections): Handle local IFUNC symbols.
(elf_s390_finish_ifunc_symbol): New function.
(elf_s390_gc_sweep_hook): Handle local plt entries.
(elf_backend_add_symbol_hook): Define.
* elf32-s390.c: See elf64-s390.c changes.
* elf-s390-common.c: New file.
* bfd-in2.h (BFD_RELOC_390_IRELATIVE): New enum field.
* libbfd.h (BFD_RELOC_390_IRELATIVE): New entry for
BFD_RELOC_390_IRELATIVE.
* reloc.c (BFD_RELOC_390_IRELATIVE): Document new relocation.
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* elf/s390.h (START_RELOC_NUMBERS): Define R_390_IRELATIVE reloc.
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* emulparams/elf_s390.sh (IREL_IN_PLT): Define.
* emulparams/elf64_s390.sh (IREL_IN_PLT): Define.
2012-07-13 15:47:27 +00:00
cd6f1cf350
PR ld/14357
...
* ldmain.c (trace_file_tries): Rename to 'verbose'.
* ldfile.c: Likewise.
* ldlang.c: Likewise.
* ldmain.h: Likewise.
* lexsup.c: Likewise.
* emultempl/elf32.em: Likewise.
* emultemp/spuelf.em: Likewise.
* pe-dll.c (pe_dll_generate_implib): Only print creation message
in verbose mode.
2012-07-13 13:20:27 +00:00
eda680f805
Add SORT_NONE and don't sort sort .init/.fini sections
...
ld/
PR ld/14156
* NEWS: Mention SORT_NONE.
* ld.h (sort_type): Add by_none.
* ld.texinfo: Document SORT_NONE.
* ldgram.y: Handle SORT_NONE.
* ldlang.c (update_wild_statements): Handle by_none. Don't
sort .init/.fini sections.
* ldlex.l: Add SORT_NONE.
ld/testsuite/
PR ld/14156
* ld-elf/fini0.s: New file.
* ld-elf/fini1.s: Likewise.
* ld-elf/fini2.s: Likewise.
* ld-elf/fini3.s: Likewise.
* ld-elf/finin.s: Likewise.
* ld-elf/foo0.s: Likewise.
* ld-elf/foo1.s: Likewise.
* ld-elf/foo2.s: Likewise.
* ld-elf/foo3.s: Likewise.
* ld-elf/foon.s: Likewise.
* ld-elf/init0.s: Likewise.
* ld-elf/init1.s: Likewise.
* ld-elf/init2.s: Likewise.
* ld-elf/init3.s: Likewise.
* ld-elf/initn.s: Likewise.
* ld-elf/pr14156a.d: Likewise.
* ld-elf/pr14156b.d: Likewise.
* ld-elf/pr14156c.d: Likewise.
* ld-elf/pr14156c.t: Likewise.
2012-07-10 06:50:57 +00:00
9aec843417
Replace __end_SECNAME with __stop_SECNAME
...
* ld.texinfo: Replace __end_SECNAME with __stop_SECNAME.
2012-07-02 16:29:07 +00:00
2a995fc189
* scripttempl/alphavms.sc: Add .debug_macro section.
...
* scripttempl/elf.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/ia64vms.sc: Likewise.
* scripttempl/armbpabi.sc: Add .debug_pubtypes, .debug_ranges and
.debug_macro sections.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfxgate.sc: Likewise.
* scripttempl/i386beos.sc: Likewise.
* scripttempl/i386go32.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
2012-06-29 07:58:46 +00:00
a61fdf08f5
Remove redundant statement
...
* ldlang.c (update_wild_statements): Remove redundant statement.
2012-06-28 12:53:29 +00:00
47e2e72998
* ldlang.c (load_symbols): Close file and set flags.loaded
...
after parsing script file.
(open_input_bfds): Don't segv on closed script.
2012-06-25 01:49:08 +00:00
0c77920e10
Enable elf_k1om for x86_64-*-linux-gnux32
...
* configure.tgt: Enable elf_k1om for x86_64-*-linux-gnux32.
Remove x32 in tdir_i386linux and tdir_elf_i386.
2012-06-24 18:52:17 +00:00
62655c7b8b
bfd/
...
* elf.c (assign_file_positions_for_non_load_sections): Define
__ehdr_start symbol if it's referenced and there's a PT_LOAD
segment that covers both the file and program headers.
ld/
* NEWS: Mention __ehdr_start.
ld/testsuite/
* ld-elf/ehdr_start.s: New file.
* ld-elf/ehdr_start.d: New file.
2012-06-22 16:52:33 +00:00
d9476c5a34
ld/
...
* ldlang.c (lang_insert_orphan): Don't make __start_<sec> symbol
absolute, and remove unnecessary alignment.
ld/testsuite/
* ld-gc/start.d: Update.
2012-06-21 03:33:00 +00:00
d2667025dd
ld/
...
* ldlang.h (lang_output_section_statement_type): Add after_end field.
(lang_abs_symbol_at_beginning_of, lang_abs_symbol_at_end_of): Delete.
(section_for_dot): Declare.
* ldlang.c (lang_size_sections_1): Correct comment.
(current_section): Move earlier.
(current_assign, prefer_next_section): New static vars.
(lang_do_assignments_1): Add found_end param. Detect _end
assignment to set found_end. Set os->after_end. Set above statics.
(lang_do_assignments): Adjust lang_do_assignments_1 call. Init
vars.
(section_for_dot): New function.
(lang_set_startof): Don't make an absolute symbol.
(lang_abs_symbol_at_beginning_of, lang_abs_symbol_at_end_of): Delete.
* ldexp.c (new_rel_from_abs): Use section_for_dot.
* emultempl/lnk960.em (symbol_at_beginning_of): New function.
(symbol_at_end_of): Likewise.
(lnk960_after_allocation): Use them.
* scripttempl/elf.sc: Precede OTHER_GOT_SYMBOLS with . = .; and
likewise before __bss_start.
ld/testsuite/
Update far too many tests.
2012-06-15 15:13:41 +00:00
6611f2e124
Handle link_info.pie in ld plugin
...
* plugin.c (set_tv_header): Handle link_info.pie.
2012-06-14 23:44:38 +00:00
17d6eea5d5
Don't hardcode .got.plt into DATA_SEGMENT_RELRO_END evaluation
...
ld/
PR ld/14215
* ldexp.c (fold_name <SIZEOF, ALIGNOF>): Allow forward section
references.
* emulparams/elf32_x86_64.sh (SEPARATE_GOTPLT): Depend on size of
.got.plt.
* emulparams/elf32mb_linux.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf32tilegx.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf32tilepro.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf64tilegx.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf_i386.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf_k1om.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf_l1om.sh (SEPARATE_GOTPLT): Likewise.
* emulparams/elf_x86_64.sh (SEPARATE_GOTPLT): Likewise.
ld/testsuite/
PR ld/14215
* ld-i386/i386.exp: Run pr14215.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr14215.d: New file.
* ld-i386/pr14215.s: Likewise.
* ld-x86-64/pr14215.d: Likewise.
* ld-x86-64/pr14215.s: Likewise.
2012-06-11 13:23:51 +00:00
fef632e18b
PR 13697
...
* scripttempl/avr.sc (.data): Keep it.
2012-06-07 16:53:10 +00:00
959a202ebc
gprof/
...
* Makefile.am (TEXINFO_TEX): Remove $(top_srcdir) prefix.
* Makefile.in: Regenerate.
ld/
* Makefile.am (TEXINFO_TEX): Remove $(top_srcdir) prefix.
* Makefile.in: Regenerate.
2012-06-02 10:19:24 +00:00
145fa769e6
Revert the last change
2012-06-01 02:28:32 +00:00
2d376810dc
Move linker test entry to ld/testsuite/ChangeLog
2012-05-31 18:21:37 +00:00
653c23d819
Add missing "foo" after ".global"
...
2012-05-31 H.J. Lu <hongjiu.lu@intel.com>
* ld-ifunc/ifunc-13a-x86-64.s: Add missing "foo" after ".global".
* ld-ifunc/ifunc-15-x86-64.s: Likewise.
2012-05-31 17:16:54 +00:00
65db8fa586
Fix ChangeLog entry
2012-05-31 17:03:18 +00:00
6d8bf25d7e
* ldlang.h (lang_output_section_statement_type): Rename
...
"section_relative_symbol" field to "update_dot".
* ldlang.c: Update all uses.
(strip_excluded_output_sections): Don't test update_dot_tree here..
(lang_leave_overlay): ..set update_dot here.
2012-05-30 04:19:11 +00:00
f05eb3b73c
ld/
...
* ldlex.h (enum option_values): Move from..
* lexsup.c: ..here.
* emultempl/ppc32elf.em: Include ldlex.h.
(PARSE_AND_LIST_ARGS_CASES): Disable optimisations when
--traditional-format.
* emultempl/ppc64elf.em: Likewise.
ld/testsuite/
* ld-srec/srec.exp: Remove powerpc64 flag setting.
2012-05-26 11:13:20 +00:00
9cf8b46e48
PR ld/13909
...
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Handle
multiple .eh_frame sections attached to bfd.
2012-05-25 01:13:59 +00:00
18bbc1c5f0
ld/
...
* scripttempl/armbpabi.sc: Match .data.rel.ro.* sections more
carefully. Fix typo where .rela.data.rel.ro matches
.rel.data.rel.ro.
* scripttempl/mep.sc: Likewise.
* scripttempl/elf.sc: Match .data.rel.ro.* sections more carefully.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
2012-05-24 01:04:53 +00:00
df7b86aa4c
PR 14072
...
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
2012-05-17 15:13:28 +00:00
3daa201b39
typo fixes
2012-05-17 10:42:29 +00:00
a0f49396fd
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma,
...
bfd_get_section_lma, bfd_get_section_alignment,
bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
in order to use the `bfd' argument.
* bfd-in2.h: Regenerate.
* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
as the first argument for `bfd_get_section_alignment'.
* elf32-arm.c (create_ifunc_sections): Likewise, for
`bfd_set_section_alignment'.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
`bfd_get_section_name'.
* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
`bfd_get_section_vma'.
* elf64-ppc.c (create_linkage_sections): Likewise, for
`bfd_set_section_alignment'.
* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
as the first argument for `bfd_get_section_name'.
* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
as the first argument for `bfd_get_section_vma'.
2012-05-16 16:38:29 +00:00
a5244b7e43
PR ld/14069
...
* emultempl/elf32.em: Include *-*-gnu* targets in ld.so.conf
support.
2012-05-16 10:43:41 +00:00
6927f98292
* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
...
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.
* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.
* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.
* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.
* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.
* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.
2012-05-15 12:55:51 +00:00
b9c361e0ad
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
208a4923ed
PR binutils/14028
...
* configure.in: Invoke ACX_HEADER_STRING.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: If STRINGS_WITH_STRING is defined then include both
string.h and strings.h.
2012-05-11 14:25:30 +00:00
e5b62927f4
* Makefile.am (check_DEJAGNU): Export LC_ALL=C in place of other
...
LC and LANG environment vars.
* Makefile.in: Regenerate.
2012-05-08 12:14:15 +00:00
d66ac08f40
2012-05-07 Tristan Gingold <gingold@adacore.com>
...
* pe-dll.c (udef_table): Make it static.
2012-05-07 10:52:00 +00:00
45dfa85a1e
Replace all uses of bfd_abs_section, bfd_com_section, bfd_und_section
...
and bfd_ind_section with their _ptr variants, or use corresponding
bfd_is_* macros.
2012-05-05 03:05:32 +00:00
3c99554527
Support x86_64-*-linux-gnux32
...
gas/
* configure.tgt: Support x86_64-*-linux-gnux32.
ld/
* configure.tgt: Support x86_64-*-linux-gnux32.
ld/testsuite/
* ld-elf/eh1.d: Skip x86_64-*-linux-gnux32.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.
* ld-elfvsb/elfvsb.exp: Xfail x86_64-*-linux-gnux32.
* ld-shared/shared.exp: Likewise.
* ld-ifunc/ifunc-3a-x86.d: Support x86_64-*-linux-gnux32.
2012-05-04 20:01:03 +00:00
f6c1a2d592
Add support for Motorola XGATE embedded CPU
2012-05-03 13:12:08 +00:00
3b66a14146
Make bfd asserts cause linker errors.
...
* ldmain.c (default_bfd_assert_handler): New variable.
(ld_bfd_assert_handler): New function.
(main): Call bfd_set_assert_handler.
2012-04-26 13:51:14 +00:00
dbaa201145
PR ld/13991
...
bfd/
* bfd/elf-bfd.h (_bfd_elf_link_just_syms): Define as
_bfd_generic_link_just_syms.
* bfd/elflink.c (_bfd_elf_link_just_syms): Delete.
* bfd/linker.c (_bfd_generic_link_just_syms): Set sec_info_type.
* bfd/bfd-in.h (discarded_section): Renamed from elf_discarded_section.
* bfd/section.c (SEC_INFO_TYPE_NONE, SEC_INFO_TYPE_STABS,
SEC_INFO_TYPE_MERGE, SEC_INFO_TYPE_EH_FRAME,
SEC_INFO_TYPE_JUST_SYMS): Renamed from corresponding ELF_INFO_TYPE.
* bfd/elf-eh-frame.c, * bfd/elf-m10200.c, * bfd/elf-m10300.c,
* bfd/elf.c, * bfd/elf32-arm.c, * bfd/elf32-avr.c, * bfd/elf32-bfin.c,
* bfd/elf32-cr16.c, * bfd/elf32-cr16c.c, * bfd/elf32-cris.c,
* bfd/elf32-crx.c, * bfd/elf32-d10v.c, * bfd/elf32-epiphany.c,
* bfd/elf32-fr30.c, * bfd/elf32-frv.c, * bfd/elf32-h8300.c,
* bfd/elf32-hppa.c, * bfd/elf32-i370.c, * bfd/elf32-i386.c,
* bfd/elf32-i860.c, * bfd/elf32-ip2k.c, * bfd/elf32-iq2000.c,
* bfd/elf32-lm32.c, * bfd/elf32-m32c.c, * bfd/elf32-m32r.c,
* bfd/elf32-m68hc1x.c, * bfd/elf32-m68k.c, * bfd/elf32-mcore.c,
* bfd/elf32-mep.c, * bfd/elf32-moxie.c, * bfd/elf32-msp430.c,
* bfd/elf32-mt.c, * bfd/elf32-openrisc.c, * bfd/elf32-ppc.c,
* bfd/elf32-rl78.c, * bfd/elf32-rx.c, * bfd/elf32-s390.c,
* bfd/elf32-score.c, * bfd/elf32-score7.c, * bfd/elf32-sh.c,
* bfd/elf32-spu.c, * bfd/elf32-tic6x.c, * bfd/elf32-tilepro.c,
* bfd/elf32-v850.c, * bfd/elf32-vax.c, * bfd/elf32-xc16x.c,
* bfd/elf32-xstormy16.c, * bfd/elf32-xtensa.c, * bfd/elf64-alpha.c,
* bfd/elf64-hppa.c, * bfd/elf64-ia64-vms.c, * bfd/elf64-mmix.c,
* bfd/elf64-ppc.c, * bfd/elf64-s390.c, * bfd/elf64-sh64.c,
* bfd/elf64-x86-64.c, * bfd/elflink.c, * bfd/elfnn-ia64.c,
* bfd/elfxx-mips.c, * bfd/elfxx-sparc.c, * bfd/elfxx-tilegx.c,
* bfd/reloc.c: Update all references.
* bfd/bfd-in2.h: Regenerate.
ld/
* ld/ldlang.c (size_input_section): Use sec_info_type rather than
usrdata->flags.just_syms.
* ld/ldwrite.c (build_link_order): Likewise.
* ld/emultempl/hppaelf.em (build_section_lists): Likewise.
* ld/emultempl/ppc64elf.em (build_toc_list): Likewise.
* ld/emultempl/armelf.em (build_section_lists): Likewise.
(after_allocation): Update for renamed sec_info_type value.
* ld/emultempl/tic6xdsbt.em: Likewise.
2012-04-24 05:12:40 +00:00
b38cadfb70
* elf32-arm.c (elf32_arm_nacl_plt0_entry, elf32_arm_nacl_plt_entry):
...
New variables.
(struct elf32_arm_link_hash_table): New member `nacl_p'.
(elf32_arm_link_hash_table_create): Initialize it.
(elf32_arm_nacl_link_hash_table_create): New function.
(arm_movw_immediate, arm_movt_immediate): New functions.
(elf32_arm_populate_plt_entry): Test HTAB->nacl_p.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_output_plt_map_1): Likewise.
(bfd_elf32_littlearm_nacl_vec, bfd_elf32_bigarm_nacl_vec):
New backend vector stanza.
(elf32_arm_nacl_modify_segment_map): New function.
* config.bfd: Handle arm-*-nacl*, armeb-*-nacl*.
* targets.c: Support bfd_elf32_{big,little}_nacl_vec.
* configure.in: Likewise.
(bfd_elf32_bigarm_nacl_vec): Add elf-nacl.lo here.
(bfd_elf32_littlearm_nacl_vec): Likewise.
(bfd_elf32_bigarm_vec, bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerated.
* configure.tgt (arm-*-nacl*): Match it.
* config/te-nacl.h (FPU_DEFAULT, EABI_DEFAULT): Define.
(LOCAL_LABELS_DOLLAR): Define.
* config/tc-arm.c (elf32_arm_target_format) [TE_NACL]:
Use nacl format variants.
* gas/elf/elf.exp (run_elf_list_test): Treat arm-*-nacl* targets
as -armeabi.
* gas/arm/any-idiv.d: Match *-*-nacl* targets too.
* gas/arm/arch4t.d: Likewise.
* gas/arm/arch4t-eabi.d: Likewise.
* gas/arm/attr-any-armv4t.d: Likewise.
* gas/arm/attr-any-thumbv6.d: Likewise.
* gas/arm/attr-cpu-directive.d: Likewise.
* gas/arm/attr-default.d: Likewise.
* gas/arm/attr-march-all.d: Likewise.
* gas/arm/attr-march-armv1.d: Likewise.
* gas/arm/attr-march-armv2a.d: Likewise.
* gas/arm/attr-march-armv2.d: Likewise.
* gas/arm/attr-march-armv2s.d: Likewise.
* gas/arm/attr-march-armv3.d: Likewise.
* gas/arm/attr-march-armv3m.d: Likewise.
* gas/arm/attr-march-armv4.d: Likewise.
* gas/arm/attr-march-armv4t.d: Likewise.
* gas/arm/attr-march-armv4txm.d: Likewise.
* gas/arm/attr-march-armv4xm.d: Likewise.
* gas/arm/attr-march-armv5.d: Likewise.
* gas/arm/attr-march-armv5t.d: Likewise.
* gas/arm/attr-march-armv5te.d: Likewise.
* gas/arm/attr-march-armv5tej.d: Likewise.
* gas/arm/attr-march-armv5texp.d: Likewise.
* gas/arm/attr-march-armv5txm.d: Likewise.
* gas/arm/attr-march-armv6.d: Likewise.
* gas/arm/attr-march-armv6j.d: Likewise.
* gas/arm/attr-march-armv6k.d: Likewise.
* gas/arm/attr-march-armv6k+sec.d: Likewise.
* gas/arm/attr-march-armv6kt2.d: Likewise.
* gas/arm/attr-march-armv6-m.d: Likewise.
* gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/arm/attr-march-armv6s-m.d: Likewise.
* gas/arm/attr-march-armv6t2.d: Likewise.
* gas/arm/attr-march-armv6z.d: Likewise.
* gas/arm/attr-march-armv6zk.d: Likewise.
* gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/arm/attr-march-armv7-a.d: Likewise.
* gas/arm/attr-march-armv7a.d: Likewise.
* gas/arm/attr-march-armv7-a+idiv.d: Likewise.
* gas/arm/attr-march-armv7-a+mp.d: Likewise.
* gas/arm/attr-march-armv7-a+sec.d: Likewise.
* gas/arm/attr-march-armv7-a+sec+virt.d: Likewise.
* gas/arm/attr-march-armv7-a+virt.d: Likewise.
* gas/arm/attr-march-armv7.d: Likewise.
* gas/arm/attr-march-armv7em.d: Likewise.
* gas/arm/attr-march-armv7-m.d: Likewise.
* gas/arm/attr-march-armv7m.d: Likewise.
* gas/arm/attr-march-armv7-r.d: Likewise.
* gas/arm/attr-march-armv7r.d: Likewise.
* gas/arm/attr-march-armv7-r+mp.d: Likewise.
* gas/arm/attr-march-iwmmxt2.d: Likewise.
* gas/arm/attr-march-iwmmxt.d: Likewise.
* gas/arm/attr-march-xscale.d: Likewise.
* gas/arm/attr-mcpu.d: Likewise.
* gas/arm/attr-mfpu-arm1020e.d: Likewise.
* gas/arm/attr-mfpu-arm1020t.d: Likewise.
* gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
* gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
* gas/arm/attr-mfpu-arm7500fe.d: Likewise.
* gas/arm/attr-mfpu-fpa10.d: Likewise.
* gas/arm/attr-mfpu-fpa11.d: Likewise.
* gas/arm/attr-mfpu-fpa.d: Likewise.
* gas/arm/attr-mfpu-fpe2.d: Likewise.
* gas/arm/attr-mfpu-fpe3.d: Likewise.
* gas/arm/attr-mfpu-fpe.d: Likewise.
* gas/arm/attr-mfpu-maverick.d: Likewise.
* gas/arm/attr-mfpu-neon.d: Likewise.
* gas/arm/attr-mfpu-neon-fp16.d: Likewise.
* gas/arm/attr-mfpu-softfpa.d: Likewise.
* gas/arm/attr-mfpu-softvfp.d: Likewise.
* gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
* gas/arm/attr-mfpu-vfp10.d: Likewise.
* gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
* gas/arm/attr-mfpu-vfp3.d: Likewise.
* gas/arm/attr-mfpu-vfp9.d: Likewise.
* gas/arm/attr-mfpu-vfp.d: Likewise.
* gas/arm/attr-mfpu-vfpv2.d: Likewise.
* gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv3.d: Likewise.
* gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/arm/attr-mfpu-vfpxd.d: Likewise.
* gas/arm/attr-names.d: Likewise.
* gas/arm/attr-order.d: Likewise.
* gas/arm/attr-override-cpu-directive.d: Likewise.
* gas/arm/attr-override-mcpu.d: Likewise.
* gas/arm/got_prel.d: Likewise.
* gas/arm/mapdir.d: Likewise.
* gas/arm/mapmisc.d: Likewise.
* gas/arm/mapsecs.d: Likewise.
* gas/arm/mapshort-eabi.d: Likewise.
* gas/arm/mapshort-elf.d: Likewise.
* gas/arm/mov-highregs-any.d: Likewise.
* gas/arm/mov-lowregs-any.d: Likewise.
* gas/arm/pr12198-1.d: Likewise.
* gas/arm/pr12198-2.d: Likewise.
* gas/arm/thumb.d: Likewise.
* gas/arm/thumb-eabi.d: Likewise.
* gas/arm/thumbrel.d: Likewise.
* configure.tgt (arm*-*-nacl*, arm*b-*-nacl*): Handle them.
* emulparams/armelf_nacl.sh: New file.
* emulparams/armelfb_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add earmelf_nacl.c
and earmelfb_nacl.c here.
(earmelf_nacl.c, earmelfb_nacl.c): New targets.
* Makefile.in: Regenerated.
* ld-arm/arm-elf.exp (armelftests): Split out into ...
(armelftests_common, armelftests_nonacl): ... these two.
(armeabitests): Split out into ...
(armeabitests_common, armeabitests_nonacl): ... these two.
Omit _nonacl sets for arm*-*-nacl* targets.
* ld-arm/farcall-mix.d: Don't match exact addresses, only symbolic ones.
* ld-arm/farcall-mix2.d: Likewise.
* ld-arm/farcall-group.d: Likewise.
* ld-arm/tls-gdesc-got.d: Match variant file formats too.
Accept some variation in exact addresses.
* ld-arm/thumb2-b-interwork.d: Match variant file formats too.
Fix regexps not to care about exact addresses where not relevant.
* ld-arm/thumb2-bl-undefweak.d: Match any hex strings, not any
strings of particular exact lengths.
* ld-arm/thumb2-bl-undefweak1.d: Likewise.
* ld-arm/arm-app.r: Match variant file formats too.
* ld-arm/arm-app-abs32.r: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/arm-lib.r: Likewise.
* ld-arm/arm-static-app.r: Likewise.
* ld-arm/armv4-bx.d: Likewise.
* ld-arm/data-only-map.d: Likewise.
* ld-arm/group-relocs.d: Likewise.
* ld-arm/jump19.d: Likewise.
* ld-arm/reloc-boundaries.d: Likewise.
* ld-arm/thumb1-bl.d: Likewise.
* ld-arm/thumb2-bl.d: Likewise.
* ld-arm/tls-app.d: Likewise.
* ld-arm/tls-app.r: Likewise.
* ld-arm/tls-gdierelax.d: Likewise.
* ld-arm/tls-gdierelax2.d: Likewise.
* ld-arm/tls-gdlerelax.d: Likewise.
* ld-arm/tls-lib.d: Likewise.
* ld-arm/tls-lib.r: Likewise.
* ld-arm/tls-mixed.r: Likewise.
* ld-arm/vfp11-fix-none.d: Likewise.
* ld-arm/vfp11-fix-scalar.d: Likewise.
* ld-arm/vfp11-fix-vector.d: Likewise.
* ld-arm/arm-static-app.d: Likewise.
Fix regexps not to care about exact number of leading spaces.
* ld-arm/arm-app-abs32.d: Likewise.
* ld-arm/fix-arm1176-off.d: Likewise.
* ld-arm/fix-arm1176-on.d: Likewise.
* ld-arm/arm-elf.exp: Treat nacl targets like eabi targets.
2012-04-12 13:01:15 +00:00
202e23565d
* configure.ac (ia64*-*-*vms*): Add support for ld.
...
* configure: Regenerate.
* scripttempl/ia64vms.sc: New file.
* emultempl/vms.em (_before_parse): Support for ia64.
(elf64-ia64-vms): New fragment for ia64.
* emulparams/elf64_ia64_vms.sh: New file.
* configure.tgt (ia64-*-*vms*): Add.
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64_ia64_vms.c
(eelf64_ia64_vms.c): New rule.
* Makefile.in: Regenerate.
* elflink.c (elf_link_output_extsym): Add a guard.
(bfd_elf_final_link): Remove assertion.
(bfd_elf_final_link): Add a guard.
* elfnn-ia64.c (INCLUDE_IA64_VMS): Removed.
(elfNN_vms_section_from_shdr, elfNN_vms_object_p)
(elfNN_vms_post_process_headers, elfNN_vms_section_processing)
(elfNN_vms_final_write_processing, elfNN_vms_close_and_cleanup):
Remove.
(elfNN-ia64-vms target): Move to ...
* elf64-ia64-vms.c: New file.
* configure.in (bfd_elf64_ia64_vms_vec): Add elf64-ia64-vms.lo
* Makefile.am (BFD64_BACKENDS): Add elf64-ia64-vms.lo.
(BFD64_BACKENDS_CFILES): Ad elf64-ia64-vms.c.
* configure: Regenerate.
* Makefile.in: Regenerate.
2012-04-12 07:35:07 +00:00
5879767462
binutils/
...
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gas/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gold/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
ld/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-06 16:49:02 +00:00
443507505d
* configure.in (AC_CHECK_FUNCS): Add setlocale.
...
(AM_LC_MESSAGES): Add.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-05 08:43:41 +00:00
5a68afcf73
bfd/
...
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-03 16:01:38 +00:00
23916fffce
ld: optimize vfinfo output slightly
...
ld atm ends up calling the write() syscall on every char when displaying
an error message. For example:
$ echo 'main(){foo();}' | strace -f -ewrite gcc -x c -o /dev/null -
...
[pid 13035] write(2, ":", 1) = 1
[pid 13035] write(2, " ", 1) = 1
[pid 13035] write(2, "I", 1) = 1
[pid 13035] write(2, "n", 1) = 1
[pid 13035] write(2, " ", 1) = 1
[pid 13035] write(2, "f", 1) = 1
[pid 13035] write(2, "u", 1) = 1
[pid 13035] write(2, "n", 1) = 1
[pid 13035] write(2, "c", 1) = 1
[pid 13035] write(2, "t", 1) = 1
[pid 13035] write(2, "i", 1) = 1
[pid 13035] write(2, "o", 1) = 1
[pid 13035] write(2, "n", 1) = 1
[pid 13035] write(2, " ", 1) = 1
[pid 13035] write(2, "`", 1) = 1
...
That's just to write ": In function `main':". A slight optimization in
the vfinfo() func gives a much more reasonable syscall footprint:
...
write(2, ": In function `", 15) = 15
...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-03 03:37:26 +00:00
26a3ed35de
* po/vi.po: Updated Vietnamese translation.
2012-03-30 12:54:48 +00:00
bf9ef60322
ld/
...
* configure.in: Set want64 on a 64-bit host regardless of
--enable-targets=all.
* configure: Regenerated.
2012-03-27 19:23:59 +00:00
1d6d1a2c05
2012-03-26 Tristan Gingold <gingold@adacore.com>
...
* lexsup.c (parse_args): Add a missing '\n'.
2012-03-26 13:05:16 +00:00
b514e6a51f
ld/
...
* ldemul.c (before_allocation_default): Revert last change.
ldlang.c (lang_add_section): Likewise.
(strip_excluded_output_sections): Don't strip output sections with
user input sections when emitrelocations, unless all are SEC_EXCLUDE.
ld/testsuite/
* ld-powerpc/vxworks-relax.rd: Remove check on reloc section
file offset and reloc symbol indices.
2012-03-25 06:45:16 +00:00
f24fcb9dad
* ldemul.c (before_allocation_default): When emitrelocations,
...
don't strip sections..
* ldlang.c (lang_add_section): ..and don't set up map_head, map_tail.
2012-03-23 09:35:34 +00:00
aeb1f0e80e
2012-03-14 Kai Tietz <ktietz@redhat.com>
...
Pascal Obry <pascal@obry.net>
* pe-dll.c (found_sym): New static variable.
(undef_count): Likewise.
(key_value): New structure.
(undef_sort_cmp): Compare routine for qsort/bsearch.
(pe_find_cdecl_alias_match): Add new argument.
(pe_undef_alias_cdecl_match): Removed.
(pe_undef_count): New helper routine.
(pe_create_undef_table): Likewise.
(pe_process_import_defs): Use pe_create_undef_table and
new pe_undef_alias_cdecl_match function.
2012-03-14 19:00:03 +00:00
ec8460b5ba
PR ld/13839
...
* ldexp.c (fold_name): Ignore undefined symbols when assigning to
dot in mark phase.
(exp_fold_tree_1): Evaluate assignment to dot expressions even when
discarding result, for side effects. Fix typo in error message.
2012-03-14 05:24:02 +00:00
67baf8c476
2012-03-08 Tristan Gingold <gingold@adacore.com>
...
* ldexp.c (exp_print_tree): Special case for SEGMENT_START.
(exp_print_token): Constify.
2012-03-08 13:53:03 +00:00
f4a23d427d
PR ld/10340
...
* ldfile.c (is_sysrooted_pathname): Remove notsame param.
(ldfile_add_library_path): Don't set sysrooted flag.
(ldfile_open_file_search): Likewise, and don't copy them.
(try_open): Delete exten and code handling such. Add sysrooted
param and return whether path is in sysroot.
(ldfile_find_command_file): Delete extend param. Add sysrooted
param. Rename local var. Update try_open calls.
(ldfile_open_command_file_1): Pass sysrooted to lex_push_file.
* ldfile.h (search_dirs_type): Remove sysrooted field.
* ldlang.c (new_afile): Always set sysrooted from input_flags.
(load_symbols): Don't set input_flags.sysrooted.
* ldlang.h (struct lang_input_statement_flags): Revise sysrooted
comment.
* ldlex.h (lex_push_file): Update prototype.
* ldlex.l (sysrooted_stack): New array.
(EOF): Pop input_flags.sysrooted.
(lex_push_file): Add sysrooted param. Save and set
input_flags.sysrooted.
2012-03-08 05:29:33 +00:00
66be105571
* ldlang.h (struct lang_input_statement_flags): New, extract from..
...
(lang_input_statement_type): ..here. New field "flags".
(input_flags): Declare.
(missing_file): Delete.
* ldmain.h (whole_archive): Delete.
(add_DT_NEEDED_for_regular, add_DT_NEEDED_for_dynamic): Delete.
* ld.h (ld_config_type <dynamic_link>): Delete.
* ldmain.c (whole_archive): Delete.
(add_DT_NEEDED_for_regular, add_DT_NEEDED_for_dynamic): Delete.
* ldlang.c (missing_file, ldlang_sysrooted_script): Delete.
(input_flags): New variable. Replace all uses of config.dynamic_link,
missing_file, ldlang_sysrooted_script, whole_archive,
add_DT_NEEDED_for_regular and add_DT_NEEDED_for_dynamic with fields
from here.
* ldfile.c: Likewise.
* ldgram.y: Likewise.
* ldmain.c: Likewise.
* ldwrite.c: Likewise.
* lexsup.c: Likewise.
* plugin.c: Likewise.
* emultempl/aix.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/scoreelf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/sunos.em: Likewise.
* emultempl/vms.em: Likewise.
* ldlang.c (new_afile): Use memset to init zero fields.
(load_symbols): Simplify save and restore of flags around command
file processing.
* ldfile.c (is_sysrooted_pathname): Tidy.
2012-03-05 22:43:40 +00:00
cae4ddc69f
* configure.tgt (mips64*el-*-freebsd*, mips64*-*-freebsd*)
...
(mips*el-*-freebsd*, mips*-*-freebsd*): Correct triplets by
replacing trailing "-*" with "*".
2012-03-05 04:02:20 +00:00
fb6ceddedd
Add big-endian support for tilegx.
...
bfd/
* config.bfd (tilegx-*-*): rename little endian vector; add big
endian vector.
(tilegxbe-*-*): New case.
* configure.in (bfd_elf32_tilegx_vec): Rename...
(bfd_elf32_tilegx_le_vec): ... to this.
(bfd_elf32_tilegx_be_vec): New vector.
(bfd_elf64_tilegx_vec): Rename...
(bfd_elf64_tilegx_le_vec): ... to this.
(bfd_elf64_tilegx_be_vec): New vector.
* configure: Regenerate.
* elf32-tilegx.c (TARGET_LITTLE_SYM): Rename.
(TARGET_LITTLE_NAME): Ditto.
(TARGET_BIG_SYM): Define.
(TARGET_BIG_NAME): Define.
* elf64-tilegx.c (TARGET_LITTLE_SYM): Rename.
(TARGET_LITTLE_NAME): Ditto.
(TARGET_BIG_SYM): Define.
(TARGET_BIG_NAME): Define.
* targets.c (bfd_elf32_tilegx_vec): Rename...
(bfd_elf32_tilegx_le_vec): ... to this.
(bfd_elf32_tilegx_be_vec): Declare.
(bfd_elf64_tilegx_vec): Rename...
(bfd_elf64_tilegx_le_vec): ... to this.
(bfd_elf64_tilegx_be_vec): Declare.
(_bfd_target_vector): Add / rename above vectors.
binutils/testsuite/
* binutils-all/objdump.exp (cpus_expected): Add tilegx.
gas/
* tc-tilegx.c (tilegx_target_format): Handle big endian.
(OPTION_EB): Define.
(OPTION_EL): Define.
(md_longopts): Add entries for "EB" and "EL".
(md_parse_option): Handle OPTION_EB and OPTION_EL.
(md_show_usage): Add -EB and -EL.
(md_number_to_chars): New.
* tc-tilegx.h (TARGET_BYTES_BIG_ENDIAN): Guard definition with
ifndef.
(md_number_to_chars): Delete.
* configure.tgt (tilegx*be): Handle.
* doc/as.texinfo [TILE-Gx]: Document -EB and -EL.
* doc/c-tilegx.texi: Ditto.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx_be.c.
(ALL_64_EMULATION_SOURCES): Add eelf64tilegx_be.c.
(eelf32tilegx_be.c): Add rule to build this file.
(eelf64tilegx_be.c): Ditto.
* Makefile.in: Regenerate.
* configure.tgt (tilegx-*-*): Support big endian.
(tilegxbe-*-*): New.
* emulparams/elf32tilegx.sh (OUTPUT_FORMAT): Rename.
(BIG_OUTPUT_FORMAT): Define.
(LITTLE_OUTPUT_FORMAT): Define.
* emulparams/elf32tilegx_be.sh: New.
* emulparams/elf64tilegx.sh (OUTPUT_FORMAT): Rename.
(BIG_OUTPUT_FORMAT): Define.
(LITTLE_OUTPUT_FORMAT): Define.
* emulparams/elf64tilegx_be.sh: New.
ld/testsuite/
* ld-tilegx/reloc-be.d: New.
* ld-tilegx/reloc-le.d: New.
* ld-tilegx/reloc.d: Delete.
* ld-tilegx/tilegx.exp: Test big and little endian.
2012-02-25 19:51:34 +00:00
5b3d386eed
PR binutils/13710
...
* defparse.y (keyword_as_name): Disable LIBRARY
keyword.
* doc/binutils.texi: Document LIBRARY exception.
PR binutils/13710
* deffilep.y (keyword_as_name): Disable LIBRARY
keyword.
2012-02-24 14:20:19 +00:00
289b70fe01
oops - omitted part of changelog entry with the previous delta.
2012-02-22 16:59:52 +00:00
2aa9aad989
PR ld/13683
...
* ldlang.c (lang_process): Rerun lang_do_assignments before
starting garbage collection.
* ldexp.c (fold_name): Generate a reloc for defined symbols
found without an associated output section during the mark phase.
(exp_fold_tree_1): Continue processing an expression, even if we
are unable to fold it, if we are in the first two evaluation
phases.
* ldexp.h (enum lang_phase_type): Add descriptions of the phases.
* ld-gc/pr13683.c: New test source file.
* ld-gc/pr13683.d: New test control and output file.
* ld-gc/gc.exp: Run the pr13683 test.
* ld-cris/tls-gc-68: Update expected symbol table dump.
* ld-cris/tls-gc-69: Likewise.
* ld-cris/tls-gc-70: Likewise.
* ld-cris/tls-gc-71: Likewise.
* ld-cris/tls-gc-75: Likewise.
* ld-cris/tls-gc-76.d: Likewise.
* ld-cris/tls-gc-79.d: Likewise.
2012-02-22 16:27:35 +00:00
6e230cc217
* deffilep.y (cmp_import_elem): Sort first by module name.
...
* pe-dll.c (process_def_file_and_drectve): Free strings
from removed export-element.
(add_bfd_to_link): Optimize loop on import-elements and lower
allocated memory.
(pe_implied_import_dll): Pass NULL instead of 0 for pointer
argument.
2012-02-19 21:18:08 +00:00
390858943d
* ldmisc.c (vfinfo <%S>): Use same type and avoid cast for
...
temporary variable node used for NULL argument.
2012-02-18 11:55:45 +00:00
dab69f680b
PR ld/13343
...
* ld.h (parsing_defsym): Delete.
* ldexp.c (exp_intop, exp_bigintop, exp_relop): Set type.filename.
(fold_binary, fold_name, exp_fold_tree_1, exp_get_vma, exp_get_fill,
exp_get_abs_int): Add tree arg for %S in error messages. Don't
fudge lineno.
(exp_binop, exp_unop, exp_nameop, exp_assop, exp_assert): Copy
type.filename from sub-tree.
(exp_trinop): Likewise, and use "cond" rather than "lhs".
* ldexp.h (node_type): Add filename field to struct.
* ldfile.c (ldfile_input_filename): Delete. Remove all refs.
* ldfile.h (ldfile_input_filename): Delete.
* ldgram.y (phdr_type, phdr_qualifiers, yyerror): Add NULL arg for
%S in error messages.
* ldemul.c (syslib_default, hll_default): Likewise.
* ldlang.c (lang_memory_region_lookup, lang_memory_region_alias,
lang_get_regions, lang_new_phdr): Likewise.
(lang_size_sections_1): Pass addr_tree for %S.
* ldlex.h (lex_redirect): Update prototype.
(ldlex_filename): Declare.
* ldlex.l (<EOF>): Don't set ldfile_input_filename.
(lex_redirect): Add fake_filename and count params. Push
fake_filename to file_name_stack and init lineno from count.
(ldlex_filename): New function.
(lex_warn_invalid): Use above.
* ldmain.c (main): Update lex_redirect call.
* ldmisc.c (vfinfo <%S>): Take file name and line number from
etree_type arg, or use current if arg is NULL.
* lexsup.c (parsing_defsym): Delete.
(parse_args <OPTION_DEFSYM>): Update lex_redirect call.
2012-02-17 14:09:57 +00:00
d0ac693824
* deffilep.y (find_export_in_list): Set is_indent for
...
first or last element, if identical.
(find_import_in_list): Likewise.
2012-02-13 20:42:07 +00:00
aa83d1ec50
ChangeLog binutils
...
2012-02-11 Kai Tietz <ktietz@redhat.com>
PR binutils/13657
* defparse.y (%union): New type id_const.
(opt_name2): New rule.
(keyword_as_name): New rule.
(opt_name): Adjust rule.
(opt_import_name): Likewise.
(opt_equal_name): Likewise.
ChangeLog binutils/testsuite
2012-02-11 Kai Tietz <ktietz@redhat.com>
* binutils-all/version.def: New file.
* binutils-all/dlltool.exp: Add version-dll test.
ChangeLog ld
2012-02-11 Kai Tietz <ktietz@redhat.com>
* deffilep.y (%union): New type id_const.
(opt_name2): New rule.
(keyword_as_name): New rule.
(dot_name): Replaced by opt_name2 rule.
(opt_name): Adjust rule.
(opt_equal_name): Likewise.
2012-02-11 20:02:03 +00:00
98872a7c39
* pe-dll.c (auto_export): Use bsearch to speed up scan of exports
...
table.
(process_def_file_and_drectve): Maintain sorting of exports table
after stripping leading @ signs.
2012-02-11 19:25:12 +00:00
09f6ed3442
* ldgram.y (input_section_spec_no_keep): Don't ignore sect_flags.
2012-02-09 05:26:13 +00:00
b7761f1106
Support arch-dependent fill
...
bfd/
2012-01-31 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13616
* archures.c (bfd_arch_info): Add fill.
(bfd_default_arch_struct): Add bfd_arch_default_fill.
(bfd_arch_default_fill): New.
* configure.in: Set bfd version to 2.22.52.
* configure: Regenerated.
* cpu-alpha.c: Add bfd_arch_default_fill to bfd_arch_info
initializer.
* cpu-arc.c: Likewise.
* cpu-arm.c: Likewise.
* cpu-avr.c: Likewise.
* cpu-bfin.c: Likewise.
* cpu-cr16.c: Likewise.
* cpu-cr16c.c: Likewise.
* cpu-cris.c: Likewise.
* cpu-crx.c: Likewise.
* cpu-d10v.c: Likewise.
* cpu-d30v.c: Likewise.
* cpu-dlx.c: Likewise.
* cpu-epiphany.c: Likewise.
* cpu-fr30.c: Likewise.
* cpu-frv.c: Likewise.
* cpu-h8300.c: Likewise.
* cpu-h8500.c: Likewise.
* cpu-hppa.c: Likewise.
* cpu-i370.c: Likewise.
* cpu-i860.c: Likewise.
* cpu-i960.c: Likewise.
* cpu-ia64.c: Likewise.
* cpu-ip2k.c: Likewise.
* cpu-iq2000.c: Likewise.
* cpu-lm32.c: Likewise.
* cpu-m10200.c: Likewise.
* cpu-m10300.c: Likewise.
* cpu-m32c.c: Likewise.
* cpu-m32r.c: Likewise.
* cpu-m68hc11.c: Likewise.
* cpu-m68hc12.c: Likewise.
* cpu-m68k.c: Likewise.
* cpu-m88k.c: Likewise.
* cpu-mcore.c: Likewise.
* cpu-mep.c: Likewise.
* cpu-microblaze.c: Likewise.
* cpu-mips.c: Likewise.
* cpu-mmix.c: Likewise.
* cpu-moxie.c: Likewise.
* cpu-msp430.c: Likewise.
* cpu-mt.c: Likewise.
* cpu-ns32k.c: Likewise.
* cpu-openrisc.c: Likewise.
* cpu-or32.c: Likewise.
* cpu-pdp11.c: Likewise.
* cpu-pj.c: Likewise.
* cpu-plugin.c: Likewise.
* cpu-powerpc.c: Likewise.
* cpu-rl78.c: Likewise.
* cpu-rs6000.c: Likewise.
* cpu-rx.c: Likewise.
* cpu-s390.c: Likewise.
* cpu-score.c: Likewise.
* cpu-sh.c: Likewise.
* cpu-sparc.c: Likewise.
* cpu-spu.c: Likewise.
* cpu-tic30.c: Likewise.
* cpu-tic4x.c: Likewise.
* cpu-tic54x.c: Likewise.
* cpu-tic6x.c: Likewise.
* cpu-tic80.c: Likewise.
* cpu-tilegx.c: Likewise.
* cpu-tilepro.c: Likewise.
* cpu-v850.c: Likewise.
* cpu-vax.c: Likewise.
* cpu-w65.c: Likewise.
* cpu-we32k.c: Likewise.
* cpu-xc16x.c: Likewise.
* cpu-xstormy16.c: Likewise.
* cpu-xtensa.c: Likewise.
* cpu-z80.c: Likewise.
* cpu-z8k.c: Likewise.
* cpu-i386.c: Include "libiberty.h".
(bfd_arch_i386_fill): New.
Add bfd_arch_i386_fill to bfd_arch_info initializer.
* cpu-k1om.c: Add bfd_arch_i386_fill to bfd_arch_info initializer.
* cpu-l1om.c: Likewise.
* linker.c (default_data_link_order): Call abfd->arch_info->fill
if fill size is 0.
* bfd-in2.h: Regenerated.
include/
2012-01-31 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13616
* bfdlink.h (bfd_link_order): Update comments on data size.
ld/
2012-01-31 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13616
* emulparams/elf32_x86_64.sh: Remove NOP.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_i386_be.sh: Likewise.
* emulparams/elf_i386_ldso.sh: Likewise.
* emulparams/elf_i386_vxworks.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.
* ldlang.c (zero_fill): Initialized to 0.
* ldwrite.c (build_link_order): Set data size to linker odrder
size when they are the same.
* scripttempl/elf.sc: Don't specify fill if NOP is undefined.
ld/testsuite/
2012-01-31 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13616
* ld-i386/tlsbindesc.dd: Update no-op padding.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
2012-01-31 17:54:39 +00:00
576477a6ee
Update copyright message year.
2012-01-17 00:07:04 +00:00
cdaa438c86
PR ld/12758
...
* ldlang.c (lang_process): Don't reopen all files, just those
newly added by plugin.
2012-01-15 01:57:15 +00:00
794e51c094
bfd/
...
* elf64-ppc.c: Define more insns used in plt call stubs.
(ppc64_elf_brtaken_reloc): Assume isa version 2 or above.
(ppc64_elf_relocate_section): Likewise.
(enum ppc_stub_type): Add ppc_stub_plt_call_r2save.
(struct ppc_link_hash_table): Increase size of stub_count array.
Add plt_stub_align and plt_thread_safe.
(ALWAYS_USE_FAKE_DEP, ALWAYS_EMIT_R2SAVE): Define.
(plt_stub_size, plt_stub_pad): New functions.
(build_plt_stub): Emit barriers for power7 thread safety. Don't
emit needless save of r2.
(build_tls_get_addr_stub): Adjust params.
(ppc_build_one_stub): Handle ppc_stub_plt_call_r2save and aligning
plt stubs. Adjust build_*plt_stub calls.
(ppc_size_one_stub): Similarly.
(ppc64_elf_size_stubs): Accept plt_thread_safe and plt_stub_align
params. Choose default for plt_thread_safe based on existence of
calls to thread creation functions. Modify plt_call to
plt_call_r2save when no tocsave reloc found. Align tail of stub
sections.
(ppc64_elf_build_stubs): Align tail of stub sections. Adjust
output of stub statistics.
(ppc64_elf_relocate_section): Handle ppc_stub_plt_call_r2save.
* elf64-ppc.h (ppc64_elf_size_stubs): Update prototype.
ld/
* emultempl/ppc64elf.em (PARSE_AND_LIST_PROLOGUE,
PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --{no-,}plt-thread-safe and
--{no-,}plt-align.
(plt_thread_safe, plt_stub_align): New vars.
(gld${EMULATION_NAME}_after_allocation): Pass them to
ppc64_elf_size_stubs. Align stub sections according to plt_stub_align.
* ld.texinfo: Document new command line options, and an old
undocumented option.
2012-01-11 09:28:45 +00:00
52546677d1
binutils/
...
* configure.in: Use AM_ZLIB.
* configure: Regenerated.
ld/
* configure.in: Use AM_ZLIB.
* configure: Regenerated.
2012-01-10 00:02:47 +00:00
23e1d3291c
Rotate ChangeLogs
2012-01-05 10:09:39 +00:00
c0a512e266
* emulparams/elf32bmip.sh (OTHER_SECTIONS): Put .mdebug.* and
...
.gcc_compiled_long* sections at address 0.
2011-12-20 17:55:24 +00:00
b3ee5f653f
* po/it.po: New Italian translation.
...
* configure.in (ALL_LINGUAS): Add it.
* configure: Regenerate.
2011-12-13 13:33:21 +00:00
87f1617a4f
* emultempl/spuelf.em (spu_elf_relink): Use pex_one in place
...
of execvp.
2011-12-01 11:38:32 +00:00
a272e28c9d
* emultempl/armelf.em: Update copyright to 2010 and 2011.
...
(PARSE_AND_LIST_OPTIONS): Fix formatting.
2011-11-25 15:04:09 +00:00
bd59d91639
* Makefile.am (ALL_64_EMULATION_SOURCES): Add powerpc64-*-freebsd
...
source.
(eelf64ppc_fbsd.c): Add rules to build this file.
* Makefile.in: Regenerate.
* configure.tgt: Add target definition for powerpc64-*-freebsd*.
Adjust powerpc-*-freebsd*.
* emultempl/ppc64elf.em: Add a mechanism to override the default
value of 0 for plt_static_chain.
* emulparams/elf32ppc_fbsd.sh (OUTPUT_FORMAT): Override the default.
* emulparams/elf64ppc_fbsd.sh (OUTPUT_FORMAT): Likewise.
(DEFAULT_PLT_STATIC_CHAIN): Define to 1.
2011-11-21 13:22:46 +00:00
1a69ff95de
* ld/ldlang.c (insert_pad): Change alignment_needed argument to
...
bfd_size_type.
(size_input_section): Change alignment_needed varible to
bfd_size_type.
* ld/ldlang.h (lang_padding_statement_type): Change size field to
bfd_size_type.
2011-11-15 18:22:27 +00:00
bbd0c8e204
2011-11-03 Tristan Gingold <gingold@adacore.com>
...
* scripttempl/aix.sc: Consider header size for .text and .data
alignment.
2011-11-03 11:53:39 +00:00
a72173de25
2011-11-02 Tristan Gingold <gingold@adacore.com>
...
* emultempl/aix.em (read_file_list): New function.
(_handle_option): Handle '-f'.
* NEWS: Mention this feature.
2011-11-02 16:28:31 +00:00
e0d08d4b30
ld:
...
* configure.tgt (x86_64-*-solaris2*): Use $targ_extra_emuls for
targ_extra_libpath.
2011-11-02 15:28:17 +00:00
99c513f6ac
[.]
...
* configure.ac (rl78-*-*) New case.
* configure: Regenerate.
[bfd]
* Makefile.am (ALL_MACHINES): Add cpu-rl78.lo.
(ALL_MACHINES_CFILES): Add cpu-rl78.c.
(BFD32_BACKENDS): Add elf32-rl78.lo.
(BFD32_BACKENDS_CFILES): Add elf32-rl78.c.
(Makefile.in): Regenerate.
* archures.c (bfd_architecture): Define bfd_arch_rl78.
(bfd_archures_list): Add bfd_rl78_arch.
* config.bfd: Add rl78-*-elf.
* configure.in: Add bfd_elf32_rl78_vec.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations.
* targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* cpu-rl78.c: New file.
* elf32-rl78.c: New file.
[binutils]
* readelf.c: Include elf/rl78.h
(guess_is_rela): Handle EM_RL78.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
* NEWS: Mention addition of RL78 support.
* MAINTAINERS: Add myself as RL78 port maintainer.
[gas]
* Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
(TARGET_CPU_HFILES): Add rc-rl78.h.
(EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
(rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
* Makefile.in: Regenerate.
* configure.in: Add rl78 case.
* configure: Regenerate.
* configure.tgt: Add rl78 case.
* config/rl78-defs.h: New file.
* config/rl78-parse.y: New file.
* config/tc-rl78.c: New file.
* config/tc-rl78.h: New file.
* NEWS: Add Renesas RL78.
* doc/Makefile.am (c-rl78.texi): New.
* doc/Makefile.in: Likewise.
* doc/all.texi: Enable it.
* doc/as.texi: Add it.
[include]
* dis-asm.h (print_insn_rl78): Declare.
[include/elf]
* common.h (EM_RL78, EM_78K0R): New.
* rl78.h: New.
[include/opcode]
* rl78.h: New file.
[ld]
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c.
(+eelf32rl78.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Add rl78-*-* case.
* emulparams/elf32rl78.sh: New file.
* NEWS: Mention addition of Renesas RL78 support.
[opcodes]
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
rl78-dis.c.
(MAINTAINERCLEANFILES): Add rl78-decode.c.
(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
* Makefile.in: Regenerate.
* configure.in: Add bfd_rl78_arch case.
* configure: Regenerate.
* disassemble.c: Define ARCH_rl78.
(disassembler): Add ARCH_rl78 case.
* rl78-decode.c: New file.
* rl78-decode.opc: New file.
* rl78-dis.c: New file.
2011-11-02 03:09:11 +00:00
69f56ae1d3
Mention Tilera support in binutils/NEWS, and fix the TILEPro
...
capitalization in gas/NEWs and ld/NEWS.
2011-10-28 14:37:30 +00:00
cfb8c0921c
bfd:
...
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo .
(ALL_MACHINES_CFILES): Add cpu-epiphany.c .
(BFD32_BACKENDS): Add elf32-epiphany.lo .
(BFD32_BACKENDS_CFILES): Add elf32-epiphany.c .
* Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate.
* archures.c (bfd_arch_epiphany): Add.
(bfd_mach_epiphany16, bfd_mach_epiphany32): Define.
(bfd_epiphany_arch): Declare.
(bfd_archures_list): Add &bfd_epiphany_arch.
* config.bfd (epiphany-*-elf): New target case.
* configure.in (bfd_elf32_epiphany_vec): New target vector case.
* reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation.
(BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise.
(BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise.
(BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise.
* targets.c (bfd_elf32_epiphany_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_epiphany_vec.
* po/SRC-POTFILES.in, po/bfd.pot: Regenerate.
* cpu-epiphany.c, elf32-epiphany.c: New files.
binutils:
* readelf.c (include "elf/epiphany.h")
(guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY.
(get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise.
(is_16bit_abs_reloc, is_none_reloc): Likewise.
* po/binutils.pot: Regenerate.
cpu:
* cpu/epiphany.cpu, cpu/epiphany.opc: New files.
gas:
* NEWS: Mention addition of Adapteva Epiphany support.
* config/tc-epiphany.c, config/tc-epiphany.h: New files.
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
(TARGET_CPU_HFILES): Add config/tc-epiphany.h .
* Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate.
* configure.in: Also set using_cgen for epiphany.
* configure.tgt: Handle epiphany.
* doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
* doc/all.texi: Set EPIPHANY.
* doc/as.texinfo: Add EPIPHANY-specific text.
* doc/c-epiphany.texi: New file.
* po/gas.pot: Regenerate.
gas/testsuite:
* gas/epiphany: New directory.
include:
* dis-asm.h (print_insn_epiphany): Declare.
* elf/epiphany.h: New file.
* elf/common.h (EM_ADAPTEVA_EPIPHANY): Define.
ld:
* NEWS: Mention addition of Adapteva Epiphany support.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c .
(eelf32epiphany.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Handle epiphany-*-elf.
* po/ld.pot: Regenerate.
* testsuite/ld-srec/srec.exp: xfail epiphany.
* emulparams/elf32epiphany.sh: New file.
opcodes:
* Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
(TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c,
epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
(CLEANFILES): Add stamp-epiphany.
(EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it.
(stamp-epiphany): New rule.
* Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate.
* configure.in: Handle bfd_epiphany_arch.
* disassemble.c (ARCH_epiphany): Define.
(disassembler): Handle bfd_arch_epiphany.
* epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files.
* epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise.
* epiphany-opc.h: Likewise.
2011-10-25 11:18:16 +00:00
07725569e1
Updated Japanese translation
2011-10-24 11:51:22 +00:00
5468810dda
PR ld/13287
...
* plugin.c (plugin_should_reload): New function.
* plugin.h (plugin_should_reload): Declare.
* ldlang.c (open_input_bfds): Use above function.
2011-10-20 09:50:59 +00:00
c192a13368
PR ld/13254
...
include/
* bfdlink.h (struct bfd_link_info): Add error_textrel.
bfd/
* elflink.c (bfd_elf_final_link): Emit error_textrel error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Add
-z text, -z notext, -z textoff options for all targets having
shared lib support.
2011-10-19 04:13:28 +00:00
4fc8963258
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Remove toc check.
2011-10-15 09:22:42 +00:00
0432176d1e
* pe-dll.c (generate_reloc): Don't emit a base reloc for an
...
underlying BFD reloc that will be discarded in eh_frame data.
2011-10-13 02:34:36 +00:00
d569865703
Updated Bulgarian, Spanish, Finnish, French, Russian and Ukranian translations.
2011-10-10 16:12:24 +00:00
Nick Clifton