gdb's README and configure instructions in the manual are quite out of
date. They mention options that haven't existed for many years, among
other things.
This patch attempts to modernize the instructions somewhat. It is not
exhaustive, just an improvement -- more could be done. Perhaps even a
couple of the nodes should simply be removed and replaced by
references to the Autoconf manual.
The README file seems to have been generated from the Texinfo at some
point in the past. I did not continue this, but instead edited it
separately.
gdb/ChangeLog
2018-09-29 Tom Tromey <tom@tromey.com>
* PROBLEMS: Rewrite.
* README: Update.
gdb/doc/ChangeLog
2018-09-29 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Requirements): Mention C++, GNU make.
(Requirements): Sort the table. Add more libraries.
(Running Configure): Remove obsolete text.
(Separate Objdir): Likewise.
(Configure Options): Likewise.
RISC-V supports instructions of varying lengths. Standard existing
instructions in the base ISA are 4 bytes in length, but the 'C'
extension adds support for compressed, 2 byte instructions. RISC-V
supports two different breakpoint instructions: EBREAK is a 4 byte
instruction in the base ISA, and C.EBREAK is a 2 byte instruction only
available on processors implementing the 'C' extension. Using EBREAK
to set breakpoints on compressed instructions causes problems as the
second half of EBREAK will overwrite the first 2 bytes of the
following instruction breaking other threads in the process if their
PC is the following instruction. Thus, breakpoints on compressed
instructions need to use C.EBREAK instead of EBREAK.
Previously, the riscv architecture checked the MISA register to
determine if the 'C' extension was available. If so, it used C.EBREAK
for all breakpoints. However, the MISA register is not necessarily
available to supervisor mode operating systems. While native targets
could provide a fake MISA register value, this patch instead examines
the existing instruction at a breakpoint target to determine which
breakpoint instruction to use. If the existing instruction is a
compressed instruction, C.EBREAK is used, otherwise EBREAK is used.
gdb/ChangeLog:
* disasm-selftests.c (print_one_insn_test): Add bfd_arch_riscv to
case with explicit breakpoint kind.
* riscv-tdep.c (show_use_compressed_breakpoints): Remove
'additional_info' and related logic.
(riscv_debug_breakpoints): New variable.
(riscv_breakpoint_kind_from_pc): Use the length of the existing
instruction to determine the breakpoint kind.
(_initialize_riscv_tdep): Add 'set/show debug riscv breakpoints'
flag. Update description of 'set/show riscv
use-compressed-breakpoints' flag.
This code was introduced back in 1998, and C99 appeared next year,
defining the `xor` as an 'alternative keyword' if iso646.h is
included. Moreover, C++98 defines it on the language level. As a
result, the code is not buildable with C++ compiler or if iso646.h is
included beforehand.
According to comment, `sim_cpu_core` is mostly a clone of `sim_core`,
so I renamed it to `byte_xor` as it's called in `sim_core`.
sim/common/ChangeLog:
* sim-core.h (sim_cpu_core): Rename cpu_core.xor to
cpu_core.byte_xor.
* sim-core.c (sim_core_set_xor): Likewise.
(sim_core_xor_read_buffer): Likewise.
(sim_core_xor_write_buffer): Likewise.
The 'frame' command, and thanks to code reuse the 'info frame' and
'select-frame' commands, currently have an overloaded mechanism for
selecting a frame.
These commands take one or two parameters, if it's one parameter then
we first try to use the parameter as an integer to select a frame by
level (or depth in the stack). If that fails then we treat the
parameter as an address and try to select a stack frame by
stack-address. If we still have not selected a stack frame, or we
initially had two parameters, then GDB allows the user to view a stack
frame that is not part of the current backtrace. Internally, a new
frame is created with the given stack and pc addresses, and this is
shown to the user.
The result of this is that a typo by the user, entering the wrong stack
frame level for example, can result in a brand new frame being viewed
rather than an error.
The purpose of this commit is to remove this overloading, while still
offering the same functionality through some new sub-commands. By
making the default behaviour of 'frame' (and friends) be to select a
stack frame by level index, it is hoped that enough
backwards-compatibility is maintained that users will not be overly
inconvenienced.
The 'frame', 'select-frame', and 'info frame' commands now all take a
frame specification string as an argument, this string can be any of the
following:
(1) An integer. This is treated as a frame level. If a frame for
that level does not exist then the user gets an error.
(2) A string like 'level <LEVEL>', where <LEVEL> is a frame level
as in option (1) above.
(3) A string like 'address <STACK-ADDRESS>', where <STACK-ADDRESS>
is a stack-frame address. If there is no frame for this address
then the user gets an error.
(4) A string like 'function <NAME>', where <NAME> is a function name,
the inner most frame for function <NAME> is selected. If there is no
frame for function <NAME> then the user gets an error.
(5) A string like 'view <STACK-ADDRESS>', this views a new frame
with stack address <STACK-ADDRESS>.
(6) A string like 'view <STACK-ADDRESS> <PC-ADDRESS>', this views
a new frame with stack address <STACK-ADDRESS> and the pc <PC-ADDRESS>.
This change assumes that the most common use of the commands like
'frame' is to select a frame by frame level, it is for this reason
that this is the behaviour that is kept for backwards compatibility.
Any of the alternative behaviours, which are assumed to be less used,
now require a change in user behaviour.
The MI command '-stack-select-frame' has not been changed. This
ensures that we maintain backwards compatibility for existing
frontends.
gdb/ChangeLog:
(NEWS): Mention changes to frame related commands.
* cli/cli-decode.c (add_cmd_suppress_notification): New function.
(add_prefix_cmd_suppress_notification): New function.
(add_com_suppress_notification): Call
add_cmd_suppress_notification.
* command.h (add_cmd_suppress_notification): Declare.
(add_prefix_cmd_suppress_notification): Declare.
* mi/mi-cmd-stack.c: Add 'safe-ctype.h' include.
(parse_frame_specification): Moved from stack.c, with
simplification to handle a single argument.
(mi_cmd_stack_select_frame): Use parse_frame_specification, the
switch to the selected frame. Add a header comment.
* stack.c: Remove 'safe-ctype.h' include.
(find_frame_for_function): Add declaration.
(find_frame_for_address): New function.
(parse_frame_specification): Moved into mi/mi-cmd-stack.c.
(frame_selection_by_function_completer): New function.
(info_frame_command): Rename to...
(info_frame_command_core): ...this, and update parameter types.
(select_frame_command): Rename to...
(select_frame_command_core): ...this, and update parameter types.
(frame_command): Rename to...
(frame_command_core): ...this, and update parameter types.
(class frame_command_helper): New class to wrap implementations of
frame related sub-commands.
(frame_apply_cmd_list): New static global.
(frame_cmd_list): Make static.
(select_frame_cmd_list): New global for sub-commands.
(info_frame_cmd_list): New global for sub-commands.
(_initialize_stack): Register sub-commands for 'frame',
'select-frame', and 'info frame'. Update 'frame apply' commands
to use frame_apply_cmd_list. Move function local static
frame_apply_list to file static frame_apply_cmd_list for
consistency.
* stack.h (select_frame_command): Delete declarationn.
(select_frame_for_mi): Declare new function.
gdb/doc/ChangeLog:
* gdb.texinfo (Frames): Rewrite the description of 'frame number'
to highlight that the number is also the frame's level.
(Selection): Rewrite documentation for 'frame' and 'select-frame'
commands.
(Frame Info): Rewrite documentation for 'info frame' command.
gdb/testsuite/ChangeLog:
* gdb.base/frame-selection.exp: New file.
* gdb.base/frame-selection.c: New file.
It is possible for the created thread to reach the breakpoint before
the main thread has set errno to 23.
Prevent this using a pthread barrier.
* gdb.threads/check-libthread-db.c (thread_routine): Use a
pthread barrier.
(main): Likewise.
2018-09-26 Sandra Loosemore <sandra@codesourcery.com>
gas/
* testsuite/gas/all/gas.exp: Skip "Output file must be distinct
from input" test on Windows host.
This commit improves the prologue scanning stack unwinder, to better
support AUIPC, LUI, and more variants of ADD and ADDI.
This allows unwinding over frames containing large local variables,
where the frame size does not fit into a single instruction immediate,
and is first loaded into a temporary register, before being added to
the stack pointer.
A new test is added that tests this behaviour. As there's nothing
truely RiscV specific about this test I've added it into gdb.base, but
as this depends on target specific code to perform the unwind it is
possible that some targets might fail this new test.
gdb/ChangeLog:
* riscv-tdep.c (riscv_insn::decode): Decode c.lui.
(riscv_scan_prologue): Split handling of AUIPC, LUI, ADD, ADDI,
and NOP.
gdb/testsuite/ChangeLog:
* gdb.base/large-frame-1.c: New file.
* gdb.base/large-frame-2.c: New file.
* gdb.base/large-frame.exp: New file.
* gdb.base/large-frame.h: New file.
It is unused, removing it fixes this error when building with clang:
/home/emaisin/src/binutils-gdb/bfd/elf32-nds32.c:3172:1: error: unused function 'elf32_nds32_allocate_dynrelocs' [-Werror,-Wunused-function]
elf32_nds32_allocate_dynrelocs (struct bfd_link_info *info, asection *sreloc,
^
1 error generated.
gcc only reports the error if you remove "inline". I don't know if this
is actually a mistake and it should actually be used though.
gdb/ChangeLog:
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): Remove.
This removes a variable definition in valops.c that has been
surrounded by "#if 0" since gdb moved to sourceware.
gdb/ChangeLog
2018-09-26 Tom Tromey <tom@tromey.com>
* valops.c (auto_abandon): Remove dead code.
I noticed that the usage string for "winheight" has a couple of
extraneous ">"s in it. I must have forgotten to remove these back
when I changed the text to use the GNU style for metasyntactic
variables.
gdb/ChangeLog
2018-09-26 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (WIN_HEIGHT_USAGE): Remove extra ">"s.
bfd/
* elfnn-riscv.c (riscv_make_plt_header): New arg output_bfd. Change
return type to bfd_boolean. If EF_RISCV_RVE call _bfd_error_handler
and return FALSE. Return TRUE at end.
(riscv_make_plt_entry): Likewise.
(riscv_elf_finish_dynamic_symbol): Update call to riscv_make_plt_entry.
(riscv_elf_finish_dynamic_sections): Update call to
riscv_make_plt_header.
Increase the fixup length to 4 for the 20 bit displacement.
gas/ChangeLog:
2018-09-25 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (md_apply_fix): Set fx_size to 4 for 20 bit
displacements.
* testsuite/gas/s390/s390.exp: Run new test.
* testsuite/gas/s390/zarch-z990-symbol-lay.s: New test.
gdbserver's configure removes -Wmissing-prototypes from the warning
flags. However, this flag is only useful for C, so this deletion is
no longer needed.
gdb/gdbserver/ChangeLog
2018-09-25 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (WARN_CFLAGS): Don't remove -Wmissing-prototypes.
This gets rid of the couple of linker failures for visium-elf:
FAIL: ld-elf/pr14156b
FAIL: ld-elf/pr22677
by tweaking the respective testcases. The first tweak is the same as the
one made to the sibling testcase ld-elf/pr14156a.d about one year ago and
the second tweak adds the usual main/start/_start/__start symbols.
ld/
* testsuite/ld-elf/pr14156b.d: Adjust for extra symbols.
* testsuite/ld-elf/pr22677.s: Define main/start/_start/__start.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc) <R_RISCV_PCREL_LO12_I>: New local
hi_sec_off which is symbol address with addend subtracted. Use in
riscv_find_pcgp_hi_reloc and riscv_record_pcgp_lo_reloc calls.
bfd/
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Add check for reloc
overflow with addend. Use reloc_dangerous instead of reloc_overflow.
Add strings for the two errors handled here.
(riscv_elf_relocate_section) In case R_RISCV_PCREL_LO12_I, rewrite
comment. Only give error with addend when used with section symbol.
In case bfd_reloc_dangerous, update error string.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend-2.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.d: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.s: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend.d: Update name
and error string.
When opening a BFD for update, as gdb --write does, modifications to
anything but the contents of sections is restricted.
Do not try to write back any ELF headers in this case.
bfd/ChangeLog
2018-09-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR gdb/20948
* elf.c (_bfd_elf_write_object_contents): Return from function
early if abfd->direction == both_direction.
gdb/testsuite/ChangeLog
2018-09-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR gdb/20948
* gdb.base/write_mem.exp: New test.
* gdb.base/write_mem.c: Likewise.
I noticed that some code in gdb was doing:
char *mumble = getenv (...)
However, using "const char *" here would be clearer.
This patch fixes the instances I could readily build.
Tested by rebuilding.
gdb/ChangeLog
2018-09-24 Tom Tromey <tom@tromey.com>
* common/pathstuff.c (get_standard_cache_dir): Make
"xdg_cache_home" and "home" const.
* top.c (init_history): Make "tmpenv" const.
* main.c (get_init_files): Make "homedir" const.
A convention in the Python layer is that raising a gdb.GdbError will
not print the Python stack -- instead the exception is treated as any
other gdb exception.
PR python/18852 asks that this treatment be extended the the
get_set_value method of gdb.Parameter. This makes sense, because it
lets Python-created parameters act like gdb parameters.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python/py-param.c (get_set_value): Use gdbpy_handle_exception.
gdb/doc/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python.texi (Parameters In Python): Document exception behavior
of get_set_string.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* gdb.python/py-parameter.exp: Add test for parameter that throws
on "set".
I noticed two nearly identical copies of the same code for handling
gdb.GdbError. The only differences were in some error messages.
These differences didn't seem very important, so this patch pulls the
code out into a new function.
2018-09-23 Tom Tromey <tom@tromey.com>
* python/py-function.c (fnpy_call): Use gdbpy_handle_exception.
* python/py-cmd.c (cmdpy_function): Use gdbpy_handle_exception.
* python/python-internal.h (gdbpy_handle_exception): Declare.
* python/py-utils.c (gdbpy_handle_exception): New function.
typy_template_argument did not check if the template argument was
non-negative. A negative value could cause a gdb crash.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* python/py-type.c (typy_template_argument): Check for negative
argument number.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* gdb.python/py-template.exp (test_template_arg): Add test for
negative template argument number.
PR python/14062 points out that errors coming from the gdb.post_event
callback are not reported. This can make it hard to understand why
your Python code in gdb isn't working.
Because users have control over whether exceptions are printed at all,
it seems good to simply have post_event report errors in the usual
way.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* python/python.c (gdbpy_run_events): Do not ignore exceptions.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* gdb.python/python.exp: Add test for post_event error.
PR python/18170 questions why it's not possible to convert a pointer
value to a Python int.
Digging a bit shows that the Python 2.7 int() constructor will happily
return a long in some cases. And, it seems gdb already understands
this in other places -- this is what gdb_py_object_from_longest
handles.
So, this patch simply extends valpy_int to allow pointer conversions,
as valpy_long does.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* python/py-value.c (valpy_int): Allow conversion from pointer
type.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* gdb.python/py-value.exp (test_value_numeric_ops): Add tests to
convert pointers to int and long.
PR python/20126 points out that sometimes the conversion of a
gdb.Value can result in a negative Python integer. This happens
because valpy_int does not examine the signedness of the value's type.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* python/py-value.c (valpy_int): Respect type sign.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* gdb.python/py-value.exp (test_value_numeric_ops): Add
signed-ness conversion tests.
PR python/18352 points out that the gdb Python code can't convert an
integer-valued gdb.Value to a Python float. While writing the test I
noticed that, similarly, converting integer gdb.Values to float does
not work. However, all of these cases seem reasonable.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* python/py-value.c (valpy_float): Allow conversions from int or
char.
(valpy_int, valpy_long): Allow conversions from float.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* gdb.python/py-value.exp (test_float_conversion): New proc.
Use it.
2018-09-23 Sandra Loosemore <sandra@codesourcery.com>
opcodes/
* nios2-dis.c (nios2_print_insn_arg): Make sure signed conversions
are used when extracting signed fields and converting them to
potentially 64-bit types.
I noticed a couple of spots in gdb that were opening files but not
marking the file descriptors as close-on-exec. This patch fixes
these.
There are still a few more of these, but they are in code that I can't
compile, so I'd prefer not to touch.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
* ctf.c (ctf_start): Use gdb_fopen_cloexec.
* common/scoped_mmap.c (mmap_file): Use gdb_open_cloexec.
Unlike Solaris/SPARC, the __sighndlr function isn't recognized as part
of a signal handler, causing a couple of testcases to fail.
The following patch fixes that. A followup patch will move this to
common code to avoid such unnecessary discrepancies between
Solaris/SPARC and x86 in the future.
While this fixes a couple of backtraces to now correctly print
#1 <signal handler called>
they often fail later with
#2 0x0ff3ffffff00857f in ?? ()
Backtrace stopped: Cannot access memory at address 0xff3000002e0886f
which needs further investigation.
Tested on amd64-pc-solaris2.11 (running the tests with both -m64 and
-m32).
* amd64-sol2-tdep.c (amd64_sol2_sigtramp_p): Also recognize
__sighndlr.
* i386-sol2-tdep.c (i386_sol2_sigtramp_p): Likewise.
This causes the inferior to stop with SIGTTIN if it tries to read from the
terminal after it has been continued.
See https://cygwin.com/ml/cygwin/2016-09/msg00285.html for reproduction.
Since MinGW doesn't have a tcsetpgrp(), I don't think this problem would be
observed there, but Cygwin does so target_terminal::ours() will call it.
Calling target_terminal::ours() here seems to be is no longer appropriate
after the "Merge async and sync code paths" changes (as the inferior is now
in a separate process group even in sync mode(?), which is always used on
Windows targets)
This call was added in commit c44537cf (and see
https://sourceware.org/ml/gdb-patches/2007-02/msg00167.html for what it
fixed, which is not regressed by this change)
When windows_nat_target::wait() is entered, the inferior is running (either
it's been just been started or attached to, or windows_continue() was
called), so grabbing the controlling terminal away from it here seems to be
wrong, since infrun.c takes care of calling target_terminal::ours() when the
inferior stops.
gdb/ChangeLog:
2018-08-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (windows_nat_target::wait): Remove a spurious
target_terminal::ours().
When building with --enable-targets=all on macOS, I get this error:
CXX aarch64-linux-tdep.o
/Users/simark/src/binutils-gdb/gdb/aarch64-linux-tdep.c:328:7: error: no matching function for call to 'store_integer'
store_integer ((gdb_byte *)&vg_target, sizeof (uint64_t), byte_order,
^~~~~~~~~~~~~
/Users/simark/src/binutils-gdb/gdb/defs.h:556:13: note: candidate template ignored: requirement 'Or<is_same<unsigned long long, long>, is_same<unsigned long long, unsigned long> >::value' was not satisfied [with T = unsigned long long]
extern void store_integer (gdb_byte *addr, int len, enum bfd_endian byte_order,
^
I believe it's because uint64_t is defined as "unsigned long long" on macOS,
even though "unsigned long" is also 64 bits. Other 64-bits platforms define
uint64_t as "unsigned long".
This makes the type of the argument to store_integer (unsigned long long) not
match the requirement that it must be the same as ULONGEST, which is unsigned
long.
Fix it by changing the type of the vl variable to be ULONGEST, which is what
extract_unsigned_integer returns anyway.
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_supply_sve_regset): Change type
of vl to ULONGEST.
echo "__thread char *p;" | gcc -c -g -xc - -o thread.o
With current powerpc64le-linux-gcc has this reloc in .debug_info
0000000000000025 0000000d0000004e R_PPC64_DTPREL64 0000000000000000 p + 8000
That stops me looking at .debug_info.
~/build/gas-virgin/powerpc64le-linux/binutils/readelf -wi thread.o
readelf: Warning: unable to apply unsupported reloc type 78 to section .debug_info
Older readelf continued on after the warning, dumping .debug_info.
* readelf.c (apply_relocations): Don't return FALSE for warnings.
clang gives these errors:
In file included from /Users/simark/src/binutils-gdb/opcodes/csky-dis.c:30:
/Users/simark/src/binutils-gdb/opcodes/csky-opc.h:2330:8: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers]
{NULL}
^
/Users/simark/src/binutils-gdb/opcodes/csky-opc.h:8126:10: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers]
{NULL}
^
They go away when we Initialize all fields. I noticed there used to be some
files built with -Wno-missing-field-initializers, but it's not the case
anymore, since commit e7ae278d04. There is still
a NO_WMISSING_FIELD_INITIALIZERS variable defined in the Makefile, but it's
unused, so I removed it to avoid further confusion.
opcodes/ChangeLog:
* Makefile.am: Remove NO_WMISSING_FIELD_INITIALIZERS.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* configure.ac: Remove check for -Wno-missing-field-initializers.
* csky-opc.h (csky_v1_opcodes): Initialize all fields of last element.
(csky_v2_opcodes): Likewise.
The fls function already exists on macOS and FreeBSD (and probably others),
leading to this error:
/Users/simark/src/binutils-gdb/bfd/elf32-nds32.c:5074:1: error: static declaration of 'fls' follows non-static declaration
fls (register unsigned int x)
^
/usr/include/strings.h:87:6: note: previous declaration is here
int fls(int) __OSX_AVAILABLE_STARTING(__MAC_10_5, __IPHONE_2_0);
^
Add a configure-time check for it, and only define it if the system doesn't
provide it.
bfd/ChangeLog:
* configure.ac: Check for fls.
* elf32-nds32.c (fls): Only define if !HAVE_FLS.
* config.in: Re-generate.
* configure: Re-generate.
commit b8426d169d
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Sep 21 04:24:40 2018 -0700
gas: Make bfin-parse.c/rl78-parse.c/rx-parse.c depend on bfd/reloc.c
It is for PR gas/23691, not PR gas/23692.
Since bfin-parse.c, rl78-parse.c and rx-parse.c use BFD_RELOC_XXX, we
need to regenerate them when bfd/reloc.c changhes.
PR gas/23692
* Makefile.am (bfin-parse.c): Depend on $(srcdir)/../bfd/reloc.c.
(rl78-parse.c): Likewise.
(rx-parse.c): Likewise.
* Makefile.in: Regenerated.
We shouldn't include zero size sections at start of PT_NOTE segment,
similar to PT_DYNAMIC segment.
PR binutils/23694
* include/elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Don't
include zero size sections at start of PT_NOTE segment.
Tom Tromey
GDB Administrator
H.J. Lu
John Baldwin
Компан, Вячеслав Олегович
Andrew Burgess
Jim Wilson
Alan Hayward
Sandra Loosemore
Simon Marchi
Andreas Krebbel
Eric Botcazou
Jozef Lawrynowicz
Rainer Orth
Jon Turney
Alan Modra
Yacov Simhony