This replaces a VEC in ppc-linux-nat.c with a std::vector.
gdb/ChangeLog
2019-05-04 Simon Marchi <simon.marchi@efficios.com>
Tom Tromey <tom@tromey.com>
* ppc-linux-nat.c (thread_points_p): Remove typedef and DEF_VEC.
(ppc_threads): Now a std::vector. Now static.
(hwdebug_find_thread_points_by_tid)
(ppc_linux_nat_target::low_new_thread, ppc_linux_thread_exit):
Update.
This changes arm-linux-nat.c to use gdb_assert_not_reached rather than
an assert of false.
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* arm-linux-nat.c (arm_linux_nat_target::can_use_hw_breakpoint):
Use gdb_assert_not_reached.
This changes compile_cplus_convert_enum to use "false".
Note that this variable is never modified, which seems like an error.
I filed PR compile/24473 for this.
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* compile/compile-cplus-types.c (compile_cplus_convert_enum): Use
"false".
This changes select_frame_for_mi to use "false" rather than "FALSE".
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* stack.c (select_frame_for_mi): Use "false", not "FALSE".
The 'is' operator is not meant to be used for comparisons. It currently working
is an implementation detail of CPython. CPython 3.8 has added a SyntaxWarning
for this.
This patch partly reverts commit 8a6d42345 ("Change representation of
psymbol to flush out accessors"); specifically, it changes
partial_symbol to no longer derive from general_symbol_info.
The basic problem here is that the bcache compares objects bitwise,
and this change made it less likely that the relevant fields in the
psymbol would be fully initialized. This could be seen by running a
test under valgrind on the Fedora-i686 buildbot.
I considered a simpler patch, namely just zeroing the psymbol's
"value" field in add_psymbol_to_bcache. However, it wasn't clear to
me that this memset could not then be optimized away by the compiler.
Regression tested by the buildbot. I think this should go in 8.3 as
well.
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* psymtab.c (psymbol_name_matches, match_partial_symbol)
(lookup_partial_symbol, print_partial_symbols)
(recursively_search_psymtabs, sort_pst_symbols, psymbol_hash)
(psymbol_compare): Update.
(add_psymbol_to_bcache): Clear the entire psymbol.
(maintenance_check_psymtabs): Update.
* psympriv.h (struct partial_symbol): Don't derive from
general_symbol_info.
<obj_section, unrelocated_address, address,
set_unrelocated_address>: Update.
<ginfo>: New member.
* dwarf-index-write.c (write_psymbols, debug_names::insert)
(debug_names::write_psymbols): Update.
Add a target board that makes it easy to run the test suite with a
.debug_names section added to executables.
gdb/ChangeLog:
2019-05-04 Tom de Vries <tdevries@suse.de>
* contrib/cc-with-tweaks.sh: Support -n arg.
gdb/testsuite/ChangeLog:
2019-05-04 Tom de Vries <tdevries@suse.de>
* boards/cc-with-debug-names.exp: New file.
Valgrind reports leaks such as the below in the tests:
gdb.threads/corethreads.exp
gdb.threads/gcore-thread.exp
gdb.ada/task_switch_in_core.exp
gdb.trace/tfile.exp
gdb.base/siginfo-thread.exp
==12701== 1,123 (72 direct, 1,051 indirect) bytes in 1 blocks are definitely lost in loss record 2,928 of 3,247
==12701== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==12701== by 0x5CF771: get_thread_arch_aspace_regcache(ptid_t, gdbarch*, address_space*) (regcache.c:330)
==12701== by 0x5CF92A: get_thread_regcache (regcache.c:366)
==12701== by 0x5CF92A: get_current_regcache() (regcache.c:372)
==12701== by 0x4C7964: get_current_frame() (frame.c:1587)
==12701== by 0x4C7A3C: get_selected_frame(char const*) (frame.c:1651)
==12701== by 0x669EAD: print_thread_info_1(ui_out*, char const*, int, int, int) (thread.c:1151)
==12701== by 0x66A9A1: info_threads_command(char const*, int) (thread.c:1217)
==12701== by 0x40A878: cmd_func(cmd_list_element*, char const*, int) (cli-decode.c:1892)
...
Fix these leaks by clearing registers and frame caches.
This leak and fix is similar to the leak fixed by 799efbe8e0
Some versions of gcc have a bug that causes
for (struct mumble : something)
... to give a compiler error. We routinely work around this bug in
gdb, but apparently had not done so in a while. This patch fixes the
remaining known cases of this problem.
gdb/ChangeLog
2019-05-03 Sandra Loosemore <sandra@codesourcery.com>
Tom Tromey <tom@tromey.com>
* dictionary.c (collate_pending_symbols_by_language): Remove
"struct" from foreach.
* symtab.c (lookup_global_symbol_from_objfile)
(lookup_symbol_in_objfile_from_linkage_name): Remove "struct" from
foreach.
* ser-tcp.c (net_open): Remove "struct" from foreach.
* objfiles.c (objfile_relocate, objfile_rebase)
(objfile_has_symbols): Remove "struct" from foreach.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Remove "struct"
from foreach.
* dwarf2read.c (handle_struct_member_die): Remove "struct" from
foreach.
* darwin-nat.c (thread_info_from_private_thread_info): Remove
"struct" from foreach.
* ada-lang.c (create_excep_cond_exprs)
(ada_exception_catchpoint_cond_string): Remove "struct" from
foreach.
An internal bug report points out that, when a global character enum
type is used, casting fails, like:
(gdb) print global_char_enum'('F')
$1 = 70
The bug here turns out to be that enumerators are qualified, so for
example the mangled name might be "pck__QU48", rather than "QU48".
This patch fixes the problem by only examining the suffix of the
enumerator. This is ok because the type is already known, and because
the mangling scheme ensures that there won't be clashes.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-03 Tom Tromey <tromey@adacore.com>
* ada-exp.y (convert_char_literal): Check suffix of each
enumerator.
gdb/testsuite/ChangeLog
2019-05-03 Tom Tromey <tromey@adacore.com>
* gdb.ada/char_enum/pck.ads (Global_Enum_Type): New type.
* gdb.ada/char_enum/foo.adb: Use Global_Enum_Type.
* gdb.ada/char_enum.exp: Add test.
This patch comes from PR ada/21406. It adds the noyywrap option to
ada-lex.l. This was already done (by the same author) for other .l
files in the binutils-gdb tree, so it seems reasonably safe.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-03 Dilyan Palauzov <dilyan.palauzov@aegee.org>
PR ada/21406:
* ada-exp.y (yywrap): Don't define.
* ada-lex.l (%option): Add noyywrap
(yywrap): Remove.
Add a target board cc-with-gdb-index.exp, to make it easy to run cc-with-tweaks
with CC_WITH_TWEAKS_FLAGS='-i'.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-05-03 Tom de Vries <tdevries@suse.de>
* boards/cc-with-gdb-index.exp: New file.
This changeset defines _WIN32_WINNT to at least 0x0501, the level
of Windows XP, unless defined to a higher level, in a single
place. It then removes all the overrides of _WIN32_WINNT in
individual files as no longer needed. Doing this also solves
compilation of windows-nat.c with mingw.org's MinGW, as that
file uses CONSOLE_FONT_INFO which needs the XP level to become
exposed in the Windows headers, while mingw.org defaults to
Windows 9X.
gdb/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* common/common-defs.h [__MINGW32__ || __CYGWIN__]: Define
_WIN32_WINNT to the XP level, unless already defined to a higher
level.
* unittests/parse-connection-spec-selftests.c:
* ser-tcp.c:
* common/netstuff.c [USE_WIN32API]: Remove the _WIN32_WINNT
override.
gdb/gdbserver/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* remote-utils.c:
* gdbreplay.c [USE_WIN32API]: Remove the _WIN32_WINNT override.
If you put the separate debug file in a global debug directory, GDB on
MS-Windows would fail to find it. This happens because we obtain the
directory to look up the debug file by concatenating the debug
directory name with the leading directories of the executable, and the
latter includes the drive letter on MS-Windows. So we get an invalid
file name like
d:/usr/lib/debug/d:/usr/bin/foo.debug
This commit fixes that by removing the colon of the drive letter,
thus producing
d:/usr/lib/debug/d/usr/bin/foo.debug
gdb/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* symfile.c (find_separate_debug_file): Remove colon from the
drive spec of DOS/Windows file names of the target, so that the
file name produced from DEBUGDIR and the target's directory will
be valid on DOS/Windows systems.
gdb/doc/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Separate Debug Files): Document how the
subdirectory of the global debug directory is computed on
MS-Windows/MS-DOS.
When printing a rust structure that contains a string GDB can
currently fail to read the fields that define the string. This is
because GDB mistakenly treats a value that is the parent structure as
though it is the structure that defines the string, and then fails to
find the fields needed to extract a string.
The solution is to create a new value to represent the string field of
the parent value.
gdb/ChangeLog:
* rust-lang.c (val_print_struct): Handle printing structures
containing strings.
gdb/testsuite/ChangeLog:
* gdb.rust/simple.exp: Add new test case.
* gdb.rust/simple.rs (struct StringAtOffset): New struct.
(main): Initialise an instance of the new struct.
I noticed that _initialize_valarith is empty. This patch removes it.
Because init.c is constructed at build time, there's no reason to keep
empty initialization functions around, because there's no overhead to
reintroducing them when needed.
gdb/ChangeLog
2019-05-02 Tom Tromey <tromey@adacore.com>
* valarith.c (_initialize_valarith): Remove.
A user at AdaCore found a case where assignment to a nested packed
structure would fail. The bug is that ada_value_primitive_field
doesn't account for the situation where a field is not packed relative
to its containing structure, but where the structure itself is packed
in its parent.
gdb/ChangeLog
2019-05-01 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_value_primitive_field): Treat more fields as
bitfields.
gdb/testsuite/ChangeLog
2019-05-01 Tom Tromey <tromey@adacore.com>
* gdb.ada/packed_array_assign/aggregates.ads (Nested_Packed): New
record.
(NPR): New variable.
* gdb.ada/packed_array_assign.exp: Add nested packed assignment
test.
A bug internal to AdaCore notes that assigning a non-scalar value to
an element of a packed array will sometimes fail.
The bug turns out to be that ada_value_assign incorrectly computes the
starting point for the assignment. This patch fixes the problem.
gdb/ChangeLog
2019-05-01 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_value_assign): Correctly compute starting offset
for big-endian copies.
gdb/testsuite/ChangeLog
2019-05-01 Tom Tromey <tromey@adacore.com>
* gdb.ada/packed_array_assign.exp: Add packed assignment
regression test.
When running fullpath-expand.exp with target_board=dwarf4-gdb-index, we run
into:
...
$ make check-gdb RUNTESTFLAGS="--target_board=dwarf4-gdb-index fullpath-expand.exp"
Running src/gdb/testsuite/gdb.base/fullpath-expand.exp ...
gdb compile failed, cc-with-tweaks.sh: unable to find usable gdb
=== gdb Summary ===
nr of untested testcases 1
...
The same happens with fullname.exp.
The dwarf4-gdb-index.exp board file includes cc-with-tweaks.exp, which uses
cc-with-tweaks.sh, which calls gdb-add-index.sh.
The gdb-add-index.sh script uses a gdb executable, defaulting to gdb:
...
GDB=${GDB:=gdb}
...
The cc-with-tweaks.sh script tries to ensure that the build gdb executable is
used by gdb-add-index.sh:
...
if [ -z "$GDB" ]
then
if [ -f ./gdb ]
then
GDB="./gdb -data-directory data-directory"
elif [ -f ../gdb ]
then
GDB="../gdb -data-directory ../data-directory"
elif [ -f ../../gdb ]
then
GDB="../../gdb -data-directory ../../data-directory"
else
echo "$myname: unable to find usable gdb" >&2
exit 1
fi
fi
...
So, if the current directory is build/gdb/testsuite, then a gdb executable
build/gdb/testsuite/../gdb will be used.
However, in the case of fullpath-expand.exp the test cd's into the sources:
...
set saved_pwd [pwd]
cd $srcdir
set err [gdb_compile "${subdir}/${srcfile} ${subdir}/${srcfile2}" $binfile \
executable {debug}]
cd $saved_pwd
...
and cc-with-tweaks.sh generates the "unable to find usable gdb" error.
The same error occurs if we use --target_board=cc-with-dwz instead (only in
this case we actually don't need gdb, we just need the GDB variable to be set
in cc-with-tweaks.sh, which arguably is a bug in cc-with-tweaks.sh).
Fix both errors in cc-with-tweaks.exp by generating a gdb script gdb.sh using
$GDB, $GDBFLAGS and $INTERNAL_GDBFLAGS and passing this script to
cc-with-tweaks.sh by setting env(GDB).
Tested on x86_64-linux for gdb.base.
gdb/testsuite/ChangeLog:
2019-05-01 Tom de Vries <tdevries@suse.de>
* boards/cc-with-tweaks.exp: Generate gdb.sh, and pass it in env(GDB).
Board file dwarf4-gdb-index.exp contains all the commands from
cc-with-tweaks.exp (with CC_WITH_TWEAKS_FLAGS set to "-i").
Make dwarf4-gdb-index.exp smaller by including cc-with-tweaks.exp.
Tested on x86_64-linux for gdb.base.
gdb/testsuite/ChangeLog:
2019-05-01 Tom de Vries <tdevries@suse.de>
* boards/dwarf4-gdb-index.exp: Use cc-with-tweaks.exp.
Dwarf5 defines DW_FORM_strx1 and others, which are similar
to DW_FORM_strx but uses 1-4 bytes unsigned integers. This is
a small step towards supporting dwarf5 in gdb.
This global is meant to point to the "main" thread of execution of
the program we are debugging. It is set when attaching to a process
or when receiving a CREATE_PROCESS_DEBUG_EVENT event. The theory at
the time was that this was also going to be the thread receiving
the EXIT_PROCESS_DEBUG_EVENT event.
Unfortunately, we have discovered since then that this is actually
not guaranteed. What this means in practice is that there is moderate
risk that main_thread_id refers to a thread which no longer exists.
This global is used in 3 situations:
- OUTPUT_DEBUG_STRING_EVENT
- LOAD_DLL_DEBUG_EVENT
- UNLOAD_DLL_DEBUG_EVENT
It's not clear why we would need to use the main_thread_id in those cases
instead of using the thread ID provided by the kernel events itself.
So this patch implements this approach, which then allows us to delete
the main_thread_id global.
gdb/testsuite:
* windows-nat.c (main_thread_id): Delete.
(handle_output_debug_string): Replace main_thread_id by
current_event.dwThreadId.
(fake_create_process): Likewise.
(get_windows_debug_event) <CREATE_PROCESS_DEBUG_EVENT>:
Do not set main_thread_id.
<LOAD_DLL_DEBUG_EVENT>: Replace main_thread_id by
current_event.dwThreadId.
<UNLOAD_DLL_DEBUG_EVENT>: Likewise.
We have observed that GDB would randomly trip the following
assertion failure when debugging on Windows. When allowing
the program to run until the inferior exits, we occasionally see:
(gdb) cont
Continuing.
[Thread 48192.0xd100 exited with code 1]
[Thread 48192.0x10ad8 exited with code 1]
[Thread 48192.0x36e28 exited with code 0]
[Thread 48192.0x52be4 exited with code 0]
[Thread 48192.0x5aa40 exited with code 0]
../../src/gdb/thread.c:453: internal-error: void delete_thread_1(thread_inf
o*, bool): Assertion `thr != nullptr' failed.
Running the same scenario with some additional traces enabled...
(gdb) set verbose
(gdb) set debugevents
... allows us to understand what the issue is. To understand, we need
to first look at the events received when starting the program, and
in particular which threads got created how. First, we get a
CREATE_PROCESS_DEBUG_EVENT for tid=0x442a8:
gdb: kernel event for pid=317536 tid=0x442a8 code=CREATE_PROCESS_DEBUG_EVENT)
Shortly after, we get some CREATE_THREAD_DEBUG_EVENT events,
one of them being for tid=0x4010c:
gdb: kernel event for pid=317536 tid=0x4010c code=CREATE_THREAD_DEBUG_EVENT)
Fast forward a bit of debugging, and we do a "cont" as above,
at which point the programs reaches the end, and the system reports
"exit" events. The first interesting one is the following:
gdb: kernel event for pid=317536 tid=0x442a8 code=EXIT_THREAD_DEBUG_EVENT)
This is reporting a thread-exit event for a thread whose tid
is the TID of what we call the "main thread". That's the thread
that was created when we received the CREATE_PROCESS_DEBUG_EVENT
notification, and whose TID is actually stored in a global variable
named main_thread_id. This is not something we expected, as
the assumption we made was that the main thread would exit last,
and we would be notified of it via an EXIT_PROCESS_DEBUG_EVENT.
But apparently, this is not always true, at least on Windows Server
2012 and 2016 where this issue has been observed happening randomly.
The consequence of the above notification is that we call
windows_delete_thread for that thread, which removes it from
our list of known threads.
And a little bit later, then we then get the EXIT_PROCESS_DEBUG_EVENT,
and we can see that the associated tid is not the main_thread_id,
but rather the tid of one of the threads that was created during
the lifetime of the program, in this case tid=0x4010c:
gdb: kernel event for pid=317536 tid=0x4010c code=EXIT_PROCESS_DEBUG_EVENT)
And the debug trace printed right after shows why we're crashing:
[Deleting Thread 317536.0x442a8]
We are trying to delete the thread whose tid=0x442a8, which is
the main_thread_id! As we have already deleted that thread before,
the search for it returns a nullptr, which then trips the assertion
check in delete_thread_1.
This commit fixes this issue. It ignores the open question of
what to do with the main_thread_id global, particularly after
that thread has been removed from our list of threads. This will
be dealt with as a separate patch, to allow cherry-picking
this patch into a release branch.
For now, we fix the code so as to avoid this crash.
gdb/ChangeLog:
* windows-nat.c (get_windows_debug_event) <EXIT_PROCESS_DEBUG_EVENT>:
Use current_event.dwThreadId instead of main_thread_id.
When an Ada program is dynamically linked against libgnat, and when
one of the standard exceptions is used, the exception object may be
referenced by the main executable using a copy relocation.
In this situation, a "catch exception" for those exceptions will not
manage to stop. This happens because, under the hood, "catch
exception" creates an expression object that examines the object
addresses -- but in this case, the address will be incorrect.
This patch fixes the problem by arranging for these filter expressions
to examine all the relevant minimal symbols. This way, the object
from libgnat will be found as well.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-04-30 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_lookup_simple_minsyms): New function.
(create_excep_cond_exprs): Iterate over program spaces.
(ada_exception_catchpoint_cond_string): Examine all minimal
symbols for exception types.
gdb/testsuite/ChangeLog
2019-04-30 Tom Tromey <tromey@adacore.com>
* lib/ada.exp (find_ada_tool): New proc.
* lib/gdb.exp (gdb_compile_shlib): Allow .o files as inputs.
* gdb.ada/catch_ex_std.exp: New file.
* gdb.ada/catch_ex_std/foo.adb: New file.
* gdb.ada/catch_ex_std/some_package.adb: New file.
* gdb.ada/catch_ex_std/some_package.ads: New file.
PR c++/24470 concerns a crash in dwarf2read.c that occurs with a
particular test case.
The issue turns out to be that process_structure_scope will pass NULL
to symbol_symtab. This happens because new_symbol decided not to
create a symbol for the particular DIE.
This patch fixes the problem by finding another reasonably-appropriate
symtab to use instead; issuing a complaint if one cannot be found for
some reason.
As mentioned in the bug, I think there are other bugs here. For
example, when using "ptype" on the "l" object in the test case, I
think I would expect to see the template parameter. I didn't research
this too closely, since it seemed more important to fix the crash.
Tested on x86-64 Fedora 29.
I'd like to check this in to the 8.3 branch as well.
2019-04-30 Tom Tromey <tromey@adacore.com>
PR c++/24470:
* dwarf2read.c (process_structure_scope): Handle case where type
has template parameters but no symbol was created.
gdb/testsuite/ChangeLog
2019-04-30 Tom Tromey <tromey@adacore.com>
PR c++/24470:
* gdb.cp/temargs.cc: Add test code from PR.
Types in Fortran can have the 'allocatable' qualifier attached to
indicate that memory needs to be explicitly allocated by the user.
This patch extends GDB to show this qualifier when printing types.
Lots of tests results are then updated to include this new qualifier
in the expected results.
gdb/ChangeLog:
* f-typeprint.c (f_type_print_base): Print 'allocatable' type
qualifier.
* gdbtypes.h (TYPE_IS_ALLOCATABLE): Define.
gdb/testsuite/ChangeLog:
* gdb.fortran/vla-datatypes.exp: Update expected results.
* gdb.fortran/vla-ptype.exp: Likewise.
* gdb.fortran/vla-type.exp: Likewise.
* gdb.fortran/vla-value.exp: Likewise.
The whitespace produced as types are printed seems inconsistent. This
commit updates the rules in an attempt to make whitespace more
balanced and consistent. Expected results are updated.
gdb/ChangeLog:
* f-typeprint.c (f_print_type): Update rules for printing
whitespace.
(f_type_print_varspec_suffix): Likewise.
gdb/testsuite/ChangeLog:
* gdb.fortran/ptr-indentation.exp: Update expected results.
* gdb.fortran/ptype-on-functions.exp: Likewise.
* gdb.fortran/vla-ptr-info.exp: Likewise.
* gdb.fortran/vla-value.exp: Likewise.
Before this commit using ptype on a Fortran function will include
information about the functions return type, but not the expected
arguments as it would for C or C++. After this commit argument types
are included in the ptype output.
For example, before GDB prints:
(gdb) ptype fun1
type = integer(kind=4) ()
(gdb) ptype is_bigger
type = logical(kind=4) ()
and after GDB prints:
(gdb) ptype fun1
type = integer(kind=4) (integer(kind=4))
(gdb) ptype is_bigger
type = logical(kind=4) (integer(kind=4), integer(kind=4))
gdb/ChangeLog:
* f-typeprint.c (f_type_print_varspec_suffix): Handle printing
function arguments.
gdb/testsuite/ChangeLog:
* gdb.fortran/ptype-on-functions.exp: New file.
* gdb.fortran/ptype-on-functions.f90: New file.
For a program compiled with gfortran the base type names are written
as lower cases in the DWARF, and so GDB will display them as lower
case. Additionally, in most places where GDB supplies its own type
names (for example all of the types defined in f-lang.c in
`build_fortran_types`), the type names are all lower case.
An exception to this is where GDB prints the void type for Fortran.
In this case GDB uses upper case.
I'm not aware of any reason why this type should merit special
attention, and it looks our of place when printing types, so this
commit changes from 'VOID' to 'void' to match all the other types.
gdb/ChangeLog:
* f-lang.c (build_fortran_types): Change name of void type to
lower case.
* f-typeprint.c (f_type_print_base): Print the name of the void
type, rather than a fixed string.
* f-valprint.c (f_decorations): Use lower case void string.
gdb/testsuite/ChangeLog:
* gdb.fortran/exprs.exp (test_convenience_variables): Expect lower
case void string.
Currently when using $_creal and $_cimag to access the components of a
complex number the types of these components will have C type names
'float', 'double', etc. This is because the components of a complex
number are not given type names in DWARF, so GDB has to pick some
suitable names, and currently we always use the C names.
This commit changes the type names used based on the language, so for
Fortran we will now use the Fortran float types, and so will get the
Fortran float type names 'real', 'real*8', etc.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_init_complex_target_type): Use different
types for Fortran.
gdb/testsuite/ChangeLog:
* gdb.fortran/complex.exp: Expand.
* gdb.fortran/complex.f: Renamed to...
* gdb.fortran/complex.f90: ...this, and extended to add more
complex values.
Future commits will add more Fortran specific expression operators.
In preparation for these new operators, this commit adds a new
fortran-operator.def file similar to how GDB already has
ada-operator.def.
I've moved UNOP_KIND the Fortran specific operator I introduced in
commit 4d00f5d8f6 into this file, and renamed it to make it clearer
that the operator is Fortran specific. I've then updated the Fortran
exp_descriptor table (exp_descriptor_f) to use entirely Fortran
specific functions that now handle UNOP_FORTRAN_KIND (the new name for
UNOP_KIND).
There should be no visible changes for standard users after this
commit, though for developers, the output when 'set debug expression
1' is now better, before:
(gdb) p kind (l1)
Dump of expression @ 0x2ccc7a0, before conversion to prefix form:
Language fortran, 5 elements, 16 bytes each.
Index Opcode Hex Value String Value
0 OP_VAR_VALUE 42 *...............
1 OP_NULL 47730176 .N..............
2 BINOP_INTDIV 47729184 J..............
3 OP_VAR_VALUE 42 *...............
4 UNOP_KIND 78 N...............
Dump of expression @ 0x2ccc7a0, after conversion to prefix form:
Expression: `Invalid expression
(gdb)
and after:
(gdb) p kind (l1)
Dump of expression @ 0x294d0b0, before conversion to prefix form:
Language fortran, 5 elements, 16 bytes each.
Index Opcode Hex Value String Value
0 OP_VAR_VALUE 40 (...............
1 unknown opcode: 224 44088544 ................
2 unknown opcode: 208 44087504 ................
3 OP_VAR_VALUE 40 (...............
4 UNOP_FORTRAN_KIND 119 w...............
Dump of expression @ 0x294d0b0, after conversion to prefix form:
Expression: `KIND(test::l1)'
Language fortran, 5 elements, 16 bytes each.
0 UNOP_FORTRAN_KIND
1 OP_VAR_VALUE Block @0x2a0bce0, symbol @0x2a0b8d0 (l1)
$1 = 1
(gdb)
gdb/ChangeLog:
* gdb/expprint.c (dump_subexp_body_standard): Remove use of
UNOP_KIND.
* gdb/expression.h (exp_opcode): Include 'fortran-operator.def'.
* gdb/f-exp.y (exp): Rename UNOP_KIND to UNOP_FORTRAN_KIND.
* gdb/f-lang.c (evaluate_subexp_f): Likewise.
(operator_length_f): New fuction.
(print_subexp_f): New function.
(op_name_f): New function.
(dump_subexp_body_f): New function.
(operator_check_f): New function.
(exp_descriptor_f): Replace standard expression handling functions
with new functions.
* gdb/fortran-operator.def: New file.
* gdb/parse.c (operator_length_standard): Remove use of UNOP_KIND.
* gdb/std-operator.def: Remove UNOP_KIND.
What appears to be a stray double quote character in std-operator.def
causes incorrect highlighting in my editor.
The quote was introduced in this commit:
commit 858be34c5a
Date: Mon Sep 4 20:21:15 2017 +0100
Handle "p S::method()::static_var" in the C++ parser
I can't see any reason why the quote should be there, so this commit
removes it.
gdb/ChangeLog:
* std-operator.def: Remove unbalanced, stray double quote
character.
Introduce a new print setting max-depth which can be set with 'set
print max-depth DEPTH'. The default value of DEPTH is 20, but this
can also be set to unlimited.
When GDB is printing a value containing nested structures GDB will
stop descending at depth DEPTH. Here is a small example:
typedef struct s1 { int a; } s1;
typedef struct s2 { s1 b; } s2;
typedef struct s3 { s2 c; } s3;
typedef struct s4 { s3 d; } s4;
s4 var = { { { { 3 } } } };
The following table shows how various depth settings affect printing
of 'var':
| Depth Setting | Result of 'p var' |
|---------------+--------------------------------|
| Unlimited | $1 = {d = {c = {b = {a = 3}}}} |
| 4 | $1 = {d = {c = {b = {a = 3}}}} |
| 3 | $1 = {d = {c = {b = {...}}}} |
| 2 | $1 = {d = {c = {...}}} |
| 1 | $1 = {d = {...}} |
| 0 | $1 = {...} |
Only structures, unions, and arrays are replaced in this way, scalars
and strings are not replaced.
The replacement is counted from the level at which you print, not from
the top level of the structure. So, consider the above example and
this GDB session:
(gdb) set print max-depth 2
(gdb) p var
$1 = {d = {c = {...}}}
(gdb) p var.d
$2 = {c = {b = {...}}}
(gdb) p var.d.c
$3 = {b = {a = 3}}
Setting the max-depth to 2 doesn't prevent the user from exploring
deeper into 'var' by asking for specific sub-fields to be printed.
The motivation behind this feature is to try and give the user more
control over how much is printed when examining large, complex data
structures.
The default max-depth of 20 means that there is a change in GDB's
default behaviour. Someone printing a data structure with 20 levels
of nesting will now see '{...}' instead of their data, they would need
to adjust the max depth, or call print again naming a specific field
in order to dig deeper into their data structure. If this is
considered a problem then we could increase the default, or even make
the default unlimited.
This commit relies on the previous commit, which added a new field to
the language structure, this new field was a string that contained the
pattern that should be used when a structure/union/array is replaced
in the output, this allows languages to use a syntax that is more
appropriate, mostly this will be selecting the correct types of
bracket '(...)' or '{...}', both of which are currently in use.
This commit should have no impact on MI output, expressions are
printed through the MI using -var-create and then -var-list-children.
As each use of -var-list-children only ever displays a single level of
an expression then the max-depth setting will have no impact.
This commit also adds the max-depth mechanism to the scripting
language pretty printers following basically the same rules as for the
built in value printing.
One quirk is that when printing a value using the display hint 'map',
if the keys of the map are structs then GDB will hide the keys one
depth level after it hides the values, this ensures that GDB produces
output like this:
$1 = map_object = {[{key1}] = {...}, [{key2}] = {...}}
Instead of this less helpful output:
$1 = map_object = {[{...}] = {...}, [{...}] = {...}}
This is covered by the new tests in gdb.python/py-nested-maps.exp.
gdb/ChangeLog:
* cp-valprint.c (cp_print_value_fields): Allow an additional level
of depth when printing anonymous structs or unions.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Don't print either the top-level value, or the children if the
max-depth is exceeded.
(ppscm_print_children): When printing the key of a map, allow one
extra level of depth.
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Don't
print either the top-level value, or the children if the max-depth
is exceeded.
(print_children): When printing the key of a map, allow one extra
level of depth.
* python/py-value.c (valpy_format_string): Add max_depth keyword.
* valprint.c: (PRINT_MAX_DEPTH_DEFAULT): Define.
(user_print_options): Initialise max_depth field.
(val_print_scalar_or_string_type_p): New function.
(val_print): Check to see if the max depth has been reached.
(val_print_check_max_depth): Define new function.
(show_print_max_depth): New function.
(_initialize_valprint): Add 'print max-depth' option.
* valprint.h (struct value_print_options) <max_depth>: New field.
(val_print_check_max_depth): Declare new function.
* NEWS: Document new feature.
gdb/doc/ChangeLog:
* gdb.texinfo (Print Settings): Document 'print max-depth'.
* guile.texi (Guile Pretty Printing API): Document that 'print
max-depth' can effect the display of a values children.
* python.texi (Pretty Printing API): Likewise.
(Values From Inferior): Document max_depth keyword.
gdb/testsuite/ChangeLog:
* gdb.base/max-depth.c: New file.
* gdb.base/max-depth.exp: New file.
* gdb.python/py-nested-maps.c: New file.
* gdb.python/py-nested-maps.exp: New file.
* gdb.python/py-nested-maps.py: New file.
* gdb.python/py-format-string.exp (test_max_depth): New proc.
(test_all_common): Call test_max_depth.
* gdb.fortran/max-depth.exp: New file.
* gdb.fortran/max-depth.f90: New file.
* gdb.go/max-depth.exp: New file.
* gdb.go/max-depth.go: New file.
* gdb.modula2/max-depth.exp: New file.
* gdb.modula2/max-depth.c: New file.
* lib/gdb.exp (get_print_expr_at_depths): New proc.
This commit is preparation work for the next commit, and by itself
makes no user visible change to GDB. I've split this work into a
separate commit in order to make code review easier.
This commit adds a new field 'la_is_string_type_p' to the language
struct, this predicate will return true if a type is a string type for
the given language.
Some languages already have a "is this a string" predicate that I was
able to reuse, while for other languages I've had to add a new
predicate. In this case I took inspiration from the value printing
code for that language - what different conditions would result in
printing something as a string.
A default "is this a string" method has also been added that looks for
TYPE_CODE_STRING, this is the fallback I've used for a couple of
languages.
In this commit I add the new field and initialise it for each
language, however at this stage the new field is never used.
gdb/ChangeLog:
* ada-lang.c (ada_language_defn): Initialise new field.
* c-lang.c (c_is_string_type_p): New function.
(c_language_defn): Initialise new field.
(cplus_language_defn): Initialise new field.
(asm_language_defn): Initialise new field.
(minimal_language_defn): Initialise new field.
* c-lang.h (c_is_string_type_p): Declare new function.
* d-lang.c (d_language_defn): Initialise new field.
* f-lang.c (f_is_string_type_p): New function.
(f_language_defn): Initialise new field.
* go-lang.c (go_is_string_type_p): New function.
(go_language_defn): Initialise new field.
* language.c (default_is_string_type_p): New function.
(unknown_language_defn): Initialise new field.
(auto_language_defn): Initialise new field.
* language.h (struct language_defn) <la_is_string_type_p>: New
member variable.
(default_is_string_type_p): Declare new function.
* m2-lang.c (m2_language_defn): Initialise new field.
* objc-lang.c (objc_language_defn): Initialise new field.
* opencl-lang.c (opencl_language_defn): Initialise new field.
* p-lang.c (pascal_is_string_type_p): New function.
(pascal_language_defn): Initialise new field.
* rust-lang.c (rust_is_string_type_p): New function.
(rust_language_defn): Initialise new field.
This commit is preparation work for a later commit, and by itself
makes no user visible change to GDB. I've split this work into a
separate commit in order to make code review easier.
This commit adds a new field 'la_struct_too_deep_ellipsis' to the
language struct, this string will be used in the next commit to print
a language specific string from within the generic value printing
code.
In this commit I add the new field and initialise it for each
language, however at this stage the new field is never used.
gdb/ChangeLog:
* language.h (struct language_defn) <la_struct_too_deep_ellipsis>:
New field.
* ada-lang.c (ada_language_defn): Initialise new field.
* c-lang.c (c_language_defn): Likewise.
(cplus_language_defn): Likewise.
(asm_language_defn): Likewise.
(minimal_language_defn): Likewise.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* go-lang.c (go_language_defn): Likewise.
* language.c (unknown_language_defn): Likewise.
(auto_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* opencl-lang.c (opencl_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* rust-lang.c (rust_language_defn): Likewise.
A later commit would like to make use of a pointer to the function
ada_is_string_type, however, this will require the function to return
a bool (so the signature matches).
As the ada_is_string_type is a predicate function, and its return
value is only ever used as either true or false, then this commit
updates the function to return a bool.
As a consequence ada_is_character_type needs to change too.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* ada-lang.c (ada_is_character_type): Change return type to bool.
(ada_is_string_type): Likewise.
* ada-lang.h (ada_is_character_type): Update declaration
(ada_is_string_type): Likewise.
When running gdb-caching-proc.exp, if skip_opencl_tests fails like this:
...
(gdb) run
Starting program: \
build/gdb/testsuite/outputs/gdb.base/gdb-caching-proc/opencltest13530.x
CHK_ERR (clGetPlatformIDs (1, &platform, NULL), -1001)
src/gdb/testsuite/lib/opencl_hostapp.c:73 error: Unknown
[Inferior 1 (process 13600) exited with code 01]
(gdb)
skip_opencl_tests: OpenCL support not detected
...
then this regexp in skip_opencl_tests fails to match:
...
-re ".*$inferior_exited_re code.*${gdb_prompt} $" {
...
so instead we hit the default clause after a 30 seconds timeout. With the
iteration count set at 10, we end up taking 6 minutes to run this test-case.
Fix this by adding the missing "with" in the regexp, bring back the runtime to
half a minute.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-04-29 Tom de Vries <tdevries@suse.de>
* lib/opencl.exp (skip_opencl_tests): Add missing "with" in regexp.
'thread|frame apply CMD' launches CMD so that CMD output goes to a string_file.
This patch ensures that string_file for such CMD output contains
style escape sequences that 'thread|frame apply' will later on
output on the real terminal, so as to have CMD output properly styled.
The idea is to have the class ui_file having overridable methods
to indicate that the output to this ui_file should be done using
'terminal' behaviour such as styling.
Then these methods are overriden in string_file so that a specially
constructed string_file will get output with style escape sequences.
After this patch, the output of CMD by thread|frame apply CMD is styled
similarly as when CMD is launched directly.
Note that string_file (term_out true) could also support wrapping,
but this is not done (yet?).
Tested on debian/amd64.
gdb/ChangeLog
2019-04-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Support style in 'frame|thread apply'
* gdbcmd.h (execute_command_to_string): New term_out parameter.
* record.c (record_start, record_stop): Update callers of
execute_command_to_string with false.
* ui-file.h (class ui_file): New term_out and can_emit_style_escape
methods.
(class string_file): New constructor with term_out parameter.
Override methods term_out and can_emit_style_escape. New member
term_out.
(class stdio_file): Override can_emit_style_escape.
(class tee_file): Override term_out and can_emit_style_escape.
* utils.h (can_emit_style_escape): Remove.
* utils.c (can_emit_style_escape): Likewise.
Update all callers of can_emit_style_escape (SOMESTREAM) to
SOMESTREAM->can_emit_style_escape.
* source-cache.c (source_cache::get_source_lines): Likewise.
* stack.c (frame_apply_command_count): Call execute_command_to_string
passing the term_out characteristic of the current gdb_stdout.
* thread.c (thr_try_catch_cmd): Likewise.
* top.c (execute_command_to_string): pass term_out parameter
to construct the string_file for the command output.
* ui-file.c (term_cli_styling): New function (most code moved
from utils.c can_emit_style_escape).
(string_file::string_file, string_file::can_emit_style_escape,
stdio_file::can_emit_style_escape, tee_file::term_out,
tee_file::can_emit_style_escape): New functions.
Inferior function calls are powerful but might lead to undesired
results such as crashes when calling nested functions (frequently
used in particular in Ada).
This implements a GDB setting to disable calling inferior functions.
Note: the idea is that if/when the 'slash command' patch is pushed,
that this setting can be changed e.g. by using the shortcut /c.
This is version 2 of the patch. It handles all the received comments,
mostly replace 'can-call' by 'may-call', and avoid using
'inferior function call' in factor of 'calling function in the program'.
2019-04-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
gdb/ChangeLog
* NEWS: Mention the new set|show may-call-functions.
* infcall.c (may_call_functions_p): New variable.
(show_may_call_functions_p): New function.
(call_function_by_hand_dummy): Throws an error if not
may-call-functions.
(_initialize_infcall): Call add_setshow_boolean_cmd for
may-call-functions.
gdb/testsuite/ChangeLog
* gdb.base/callexit.exp: Test may-call-functions off.
gdb/doc/ChangeLog
* gdb.texinfo (Calling): Document the new
set|show may-call-functions.
This bug finds another usage where we end up segfaulting while
normalizing user input. inspect_type and replace_type recurse,
attempting to substitute the "real" symbol name for the typedef name.
However, since the both these names are the same, they keep calling
each other until the stack overflows.
A simple reproducer for it is given by
typedef struct foo foo;
int qux (foo *f) { return 0; }
(gdb) b qux(foo*)
Segmentation fault
inspect_type already contains some special handling to prevent a
similar situation from occurring with namespaces. I wonder, however,
whether we need be so pedantic about the exact nature of the substitution.
This patch implements this rather more aggressive assumption that these
substitutions should be avoided whenever the replacement symbol's name is
exactly the same as the one we're trying to substitute. [In the above
example, we're trying to substitute the tyepdef named "foo" with the symbol
named "foo" (a struct).]
gdb/ChangeLog:
PR c++/24367
* cp-support.c (inspect_type): Don't attempt substitutions
of symbol with the same name.
gdb/testsuite/ChangeLog:
PR c++/24367
* gdb.cp/meth-typedefs.cc (incomplete_struct)
(another_incomplete_struct, test_incomplete): New definitions.
(main): Use new definitions.
* gdb.cp/meth-typedefs.exp: Add new tests for `test_incomplete'
functions.
PR gdb/24475 concerns a memory leak coming from gdb's exception
handling code.
The leak occurs because throw_exception_sjlj does not arrange to
destroy the exception object it is passed. However, because
gdb_exception has a destructor, it's undefined to longjmp in this
situation.
This patch fixes the problem by avoiding the need to run any
destructors in gdb_rl_callback_handler, by making the gdb_exception
"static".
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
PR gdb/24475:
* event-top.c (gdb_rl_callback_handler): Make "gdb_rl_expt"
static.
This makes exception handling more efficient in a few spots, through
the use of const- and rvalue-references.
I wrote this patch by commenting out the gdb_exception copy
constructor and then examining the resulting error messages one by
one, introducing the use of std::move where appropriate.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (struct gdb_xml_parser) <set_error>: Take an
rvalue reference.
(gdb_xml_start_element_wrapper, gdb_xml_end_element_wrapper)
(gdb_xml_parser::parse): Use std::move.
* python/python-internal.h (gdbpy_convert_exception): Take a const
reference.
* python/py-value.c (valpy_getitem, valpy_nonzero): Use
std::move.
* python/py-utils.c (gdbpy_convert_exception): Take a const
reference.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Use std::move.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Use std::move.
* mi/mi-main.c (mi_print_exception): Take a const reference.
* main.c (handle_command_errors): Take a const reference.
* linespec.c (parse_linespec): Use std::move.
* infcall.c (run_inferior_call): Use std::move.
(call_function_by_hand_dummy): Use std::move.
* exec.c (try_open_exec_file): Use std::move.
* exceptions.h (exception_print, exception_fprintf)
(exception_print_same): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Change parameters to
const reference.
* event-top.c (gdb_rl_callback_read_char_wrapper): Update.
* common/new-op.c: Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
constructor.
(struct gdb_exception_error, struct gdb_exception_quit, struct
gdb_quit_bad_alloc): Change constructor to move constructor.
(throw_exception): Change parameter to rvalue reference.
* common/common-exceptions.c (throw_exception): Take rvalue
reference.
* cli/cli-interp.c (safe_execute_command): Use std::move.
* breakpoint.c (insert_bp_location, location_to_sals): Use
std::move.
The Guile code will longjmp (via scm_throw) when an object requiring
destruction is on the stack. This is undefined behavior.
This changes this code to run any destructors in inner scopes, and to
pass a POD to gdbscm_throw_gdb_exception.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception)
(gdbscm_throw_gdb_exception): Take a gdbscm_gdb_exception.
* guile/scm-block.c, guile/scm-breakpoint.c, guile/scm-cmd.c,
guile/scm-disasm.c, guile/scm-frame.c, guile/scm-lazy-string.c,
guile/scm-math.c, guile/scm-param.c, guile/scm-ports.c,
guile/scm-symbol.c, guile/scm-symtab.c, guile/scm-type.c,
guile/scm-value.c: Use unpack.
* guile/guile-internal.h (gdbscm_scm_from_gdb_exception): Take a
gdbscm_gdb_exception.
(gdbscm_throw_gdb_exception): Likewise.
(struct gdbscm_gdb_exception): New.
(unpack): New function.
(gdbscm_wrap): Use unpack.
This changes the SJLJ exception handling code to be a bit more
efficient, by using rvalue references and move assignment when
possible.
Tested by the buildbot.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept)
(gdb_rl_callback_handler): Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
assignment operator.
(throw_exception_sjlj): Change "exception" to const reference.
* common/common-exceptions.c (exceptions_state_mc_catch): Update.
(throw_exception_sjlj): Change "exception" to const reference.
This patch has a long story, but it all started back in 2015, with
commit df8411da08 ("Implement support
for checking /proc/PID/coredump_filter"). The purpose of that commit
was to bring GDB's corefile generation closer to what the Linux kernel
does. However, back then, I did not implement the full support for
the dumping of memory mappings containing ELF headers (like mappings
of DSOs or executables). These mappings were being dumped most of
time, though, because the default value of /proc/PID/coredump_filter
is 0x33, which would cause anonymous private mappings (DSOs/executable
code mappings have this type) to be dumped. Well, until something
happened on binutils...
A while ago, I noticed something strange was happening with one of our
local testcases on Fedora GDB: it was failing due to some strange
build-id problem. On Fedora GDB, we (unfortunately) carry a bunch of
"local" patches, and some of these patches actually extend upstream's
build-id support in order to generate more useful information for the
user of a Fedora system (for example, when the user loads a corefile
into GDB, we detect whether the executable that generated that
corefile is present, and if it's not we issue a warning suggesting
that it should be installed, while also providing the build-id of the
executable). A while ago, Fedora GDB stopped printing those warnings.
I wanted to investigate this right away, and spent some time trying to
determine what was going on, but other things happened and I got
sidetracked. Meanwhile, the bug started to be noticed by some of our
users, and its priority started changing. Then, someone on IRC also
mentioned the problem, and when I tried helping him, I noticed he
wasn't running Fedora. Hm... So maybe the bug was *also* present
upstream.
After "some" time investigating, and with a lot of help from Keith and
others, I was finally able to determine that yes, the bug is also
present upstream, and that even though it started with a change in ld,
it is indeed a GDB issue.
So, as I said, the problem started with binutils, more specifically
after the following commit was pushed:
commit f6aec96dce
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 27 11:34:20 2018 -0800
ld: Add --enable-separate-code
This commit makes ld use "-z separate-code" by default on x86-64
machines. What this means is that code pages and data pages are now
separated in the binary, which is confusing GDB when it tries to decide
what to dump.
BTW, Fedora 28 binutils doesn't have this code, which means that
Fedora 28 GDB doesn't have the problem. From Fedora 29 on, binutils
was rebased and incorporated the commit above, which started causing
Fedora GDB to fail.
Anyway, the first thing I tried was to pass "-z max-page-size" and
specify a bigger page size (I saw a patch that did this and was
proposed to Linux, so I thought it might help). Obviously, this
didn't work, because the real "problem" is that ld will always use
separate pages for code and data. So I decided to look into how GDB
dumped the pages, and that's where I found the real issue.
What happens is that, because of "-z separate-code", the first two pages
of the ELF binary are (from /proc/PID/smaps):
00400000-00401000 r--p 00000000 fc:01 799548 /file
Size: 4 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 4 kB
Pss: 4 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 4 kB
Private_Dirty: 0 kB
Referenced: 4 kB
Anonymous: 0 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd mr mw me dw sd
00401000-00402000 r-xp 00001000 fc:01 799548 /file
Size: 4 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 4 kB
Pss: 4 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 4 kB
Referenced: 4 kB
Anonymous: 4 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd ex mr mw me dw sd
Whereas before, we had only one:
00400000-00401000 r-xp 00000000 fc:01 798593 /file
Size: 4 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 4 kB
Pss: 4 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 4 kB
Referenced: 4 kB
Anonymous: 4 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd ex mr mw me dw sd
Notice how we have "Anonymous" data mapped into the page. This will be
important.
So, the way GDB decides which pages it should dump has been revamped
by my patch in 2015, and now it takes the contents of
/proc/PID/coredump_filter into account. The default value for Linux
is 0x33, which means:
Dump anonymous private, anonymous shared, ELF headers and HugeTLB
private pages.
Or:
filter_flags filterflags = (COREFILTER_ANON_PRIVATE
| COREFILTER_ANON_SHARED
| COREFILTER_ELF_HEADERS
| COREFILTER_HUGETLB_PRIVATE);
Now, it is important to keep in mind that GDB doesn't always have *all*
of the necessary information to exactly determine the type of a page, so
the whole algorithm is based on heuristics (you can take a look at
linux-tdep.c:dump_mapping_p and
linux-tdep.c:linux_find_memory_regions_full for more info).
Before the patch to make ld use "-z separate-code", the (single) page
containing data and code was being flagged as an anonymous (due to the
non-zero "Anonymous:" field) private (due to the "r-xp" permission),
which means that it was being dumped into the corefile. That's why it
was working fine.
Now, as you can imagine, when "-z separate-code" is used, the *data*
page (which is where the ELF notes are, including the build-id one) now
doesn't have any "Anonymous:" mapping, so the heuristic is flagging it
as file-backed private, which is *not* dumped by default.
The next question I had to answer was: how come a corefile generated by
the Linux kernel was correct? Well, the answer is that GDB, unlike
Linux, doesn't actually implement the COREFILTER_ELF_HEADERS support.
On Linux, even though the data page is also treated as a file-backed
private mapping, it is also checked to see if there are any ELF headers
in the page, and then, because we *do* have ELF headers there, it is
dumped.
So, after more time trying to think of ways to fix this, I was able to
implement an algorithm that reads the first few bytes of the memory
mapping being processed, and checks to see if the ELF magic code is
present. This is basically what Linux does as well, except that, if
it finds the ELF magic code, it just dumps one page to the corefile,
whereas GDB will dump the whole mapping. But I don't think that's a
big issue, to be honest.
It's also important to explain that we *only* perform the ELF magic
code check if:
- The algorithm has decided *not* to dump the mapping so far, and;
- The mapping is private, and;
- The mapping's offset is zero, and;
- The user has requested us to dump mappings with ELF headers.
IOW, we're not going to blindly check every mapping.
As for the testcase, I struggled even more trying to write it. Since
our build-id support on upstream GDB is not very extensive, it's not
really possible to determine whether a corefile contains build-id
information or not just by using GDB. So, after thinking a lot about
the problem, I decided to rely on an external tool, eu-unstrip, in
order to verify whether the dump was successful. I verified the test
here on my machine, and everything seems to work as expected (i.e., it
fails without the patch, and works with the patch applied). We are
working hard to upstream our "local" Fedora GDB patches, and we intend
to submit our build-id extension patches "soon", so hopefully we'll be
able to use GDB itself to perform this verification.
I built and regtested this on the BuildBot, and no problems were
found.
gdb/ChangeLog:
2019-04-25 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/11608
PR corefiles/18187
* linux-tdep.c (dump_mapping_p): Add new parameters ADDR and
OFFSET. Verify if current mapping contains an ELF header.
(linux_find_memory_regions_full): Adjust call to
dump_mapping_p.
gdb/testsuite/ChangeLog:
2019-04-25 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/11608
PR corefiles/18187
* gdb.base/coredump-filter-build-id.exp: New file.
Add both board option and environment variable which enables gdbserver
debug and sends it to the file gdbserver.debug, located in the output
directory for the current test. Document this.
Add support for the environment variable in the Makefile.
The testsuite can be run with gdbserver debug enabled in the following way:
make check GDBSERVER_DEBUG=all
Disable tspeed.exp when debugging to prevent the log file filling
many gigabytes then timing out.
gdb/testsuite/ChangeLog:
* Makefile.in: Pass through GDBSERVER_DEBUG.
* README (Testsuite Parameters): Add GDBSERVER_DEBUG.
(gdbserver,debug): Add board setting.
* gdb.trace/tspeed.exp: Skip when debugging.
* lib/gdb.exp (gdbserver_debug_enabled): New procedure.
* lib/gdbserver-support.exp: Likewise
GDB was failing to catch cases where a corrupt ELF or core file
contained an invalid length value in a Dwarf debug frame FDE header.
It was checking for buffer overflow but not cases where the length was
negative or caused pointer wrap-around.
In addition to the additional validity check, this patch cleans up the
multiple signed/unsigned conversions on the length field so that an
unsigned representation is used consistently throughout.
This patch fixes CVE-2017-9778 and PR gdb/21600.
2019-04-25 Sandra Loosemore <sandra@codesourcery.com>
Kang Li <kanglictf@gmail.com>
PR gdb/21600
* dwarf2-frame.c (read_initial_length): Be consistent about using
unsigned representation of length.
(decode_frame_entry_1): Likewise. Check for wraparound of
end pointer as well as buffer overflow.
This changes the gdb test suite to omit -fno-stack-protector when
compiling Rust code. This makes Rust testing work again.
I think I saw this patch somewhere already, but I couldn't find it
again just now, so I'm checking this version in.
gdb/testsuite/ChangeLog
2019-04-24 Tom Tromey <tromey@adacore.com>
* lib/gdb.exp (gdb_compile): Don't add -fno-stack-protector for
Rust.
While trying to build GDB on i686, I found the following error:
In file included from ../../gdb/common/common-defs.h:105,
from ../../gdb/defs.h:28,
from ../../gdb/aarch64-tdep.c:21:
../../gdb/aarch64-tdep.c: In function 'gdbarch* aarch64_gdbarch_init(gdbarch_info, gdbarch_list*)':
../../gdb/aarch64-tdep.c:3176:43: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'uint64_t' {aka 'long long unsigned int'} [-Werror=format=]
3176 | internal_error (__FILE__, __LINE__, _("VQ out of bounds: %ld (max %d)"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../gdb/common/gdb_locale.h:28:29: note: in definition of macro '_'
28 | # define _(String) gettext (String)
| ^~~~~~
../../gdb/aarch64-tdep.c:3176:64: note: format string is defined here
3176 | internal_error (__FILE__, __LINE__, _("VQ out of bounds: %ld (max %d)"),
| ~~^
| |
| long int
| %lld
This happens because aarch64-tdep.c:aarch64_gdbarch_init prints a
"uint64_t" variable using "%ld". This patch fixes the build by using
"pulongest" instead. As explained in a similar fix (commit
495143533a), this should be safe because
if aarch64-tdep.c is included in the build, then ULONGEST must be a
64-bit type.
gdb/ChangeLog:
2019-04-24 Sergio Durigan Junior <sergiodj@redhat.com>
* aarch64-tdep.c (aarch64_gdbarch_init): Use "pulongest" to print
"vq".
Commit 4aa866af ("Fix AMD64 return value ABI in expression
evaluation") introduced a regression when calling a function with a
structure that contains bitfields.
Because the caller of amd64_has_unaligned_fields handles bitfields
already, it seemed to me that the simplest fix was to ignore bitfields
here.
gdb/ChangeLog
2019-04-24 Tom Tromey <tromey@adacore.com>
* amd64-tdep.c (amd64_has_unaligned_fields): Ignore bitfields.
gdb/testsuite/ChangeLog
2019-04-24 Tom Tromey <tromey@adacore.com>
* gdb.arch/amd64-eval.exp: Test bitfield return.
* gdb.arch/amd64-eval.cc (struct Bitfields): New.
(class Foo) <return_bitfields>: New method.
(main): Call it.
Make use of the default gdbarch methods for gdbarch_unwind_pc, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* s12z-tdep.c (s12z_unwind_pc): Delete.
(s12z_unwind_sp): Delete.
(s12z_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch method gdbarch_unwind_sp where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* rl78-tdep.c (rl78_unwind_sp): Delete.
(rl78_gdbarch_init): Don't register deleted function with gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* xstormy16-tdep.c (xstormy16_unwind_sp): Delete.
(xstormy16_unwind_pc): Delete.
(xstormy16_dummy_id): Delete.
(xstormy16_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch method gdbarch_unwind_pc where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* vax-tdep.c (vax_unwind_pc): Delete.
(vax_gdbarch_init): Don't register deleted function with gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* v850-tdep.c (v850_unwind_sp): Delete.
(v850_unwind_pc): Delete.
(v850_dummy_id): Delete.
(v850_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* tilegx-tdep.c (tilegx_unwind_sp): Delete.
(tilegx_unwind_pc): Delete.
(tilegx_unwind_dummy_id): Delete.
(tilegx_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* tic6x-tdep.c (tic6x_unwind_sp): Delete.
(tic6x_dummy_id): Delete.
(tic6x_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch method gdbarch_unwind_pc where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* sparc-tdep.c (sparc_unwind_pc): Delete.
(sparc32_gdbarch_init): Don't register deleted function with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* sh-tdep.c (sh_unwind_sp): Delete.
(sh_unwind_pc): Delete.
(sh_dummy_id): Delete.
(sh_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* score-tdep.c (score_unwind_sp): Delete.
(score_unwind_pc): Delete.
(score_dummy_id): Delete.
(score_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* rx-tdep.c (rx_unwind_pc): Delete.
(rx_unwind_sp): Delete.
(rx_dummy_id): Delete.
(rx_gdbarch_init): Don't register deleted functions with
gdbarch. Update comment.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_unwind_pc): Delete.
(rs6000_dummy_id): Delete.
(rs6000_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch method gdbarch_dummy_id where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
This commit leaves or1k_unwind_sp and or1k_unwind_pc in place. These
functions do match the default methods except that they add additional
debugging code. In order to preserve the debug I have left these
functions unchanged.
gdb/ChangeLog:
* or1k-tdep.c (or1k_dummy_id): Delete.
(or1k_gdbarch_init): Don't register deleted function with gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* nios2-tdep.c (nios2_dummy_id): Delete.
(nios2_unwind_sp): Delete.
(nios2_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* nds32-tdep.c (nds32_dummy_id): Delete.
(nds32_unwind_pc): Delete.
(nds32_unwind_sp): Delete.
(nds32_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* msp430-tdep.c (msp430_unwind_pc): Delete.
(msp430_unwind_sp): Delete.
(msp430_dummy_id): Delete.
(msp430_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* moxie-tdep.c (moxie_unwind_sp): Delete.
(moxie_unwind_pc): Delete.
(moxie_dummy_id): Delete.
(moxie_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* mn10300-tdep.c (mn10300_dummy_id): Delete.
(mn10300_unwind_pc): Delete.
(mn10300_unwind_sp): Delete.
(mn10300_push_dummy_call): Use gdbarch_unwind_sp not
mn10300_unwind_sp.
(mn10300_frame_unwind_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* mep-tdep.c (mep_unwind_pc): Delete.
(mep_unwind_sp): Delete.
(mep_dummy_id): Delete.
(mep_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_unwind_pc, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* m68hc11-tdep.c (m68hc11_unwind_pc): Delete.
(m68hc11_unwind_sp): Delete.
(m68hc11_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* m32r-tdep.c (m32r_unwind_sp): Delete.
(m32r_unwind_pc): Delete.
(m32r_dummy_id): Delete.
(m32r_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* m32c-tdep.c (m32c_unwind_pc): Delete.
(m32c_unwind_sp): Delete.
(m32c_dummy_id): Delete.
(m32c_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* gdb/lm32-tdep.c (lm32_unwind_sp): Delete.
(lm32_unwind_pc): Delete.
(lm32_dummy_id): Delete.
(lm32_gdbarch_init): Don't register deleted functions with
gdbarch.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* gdb/iq2000-tdep.c (iq2000_unwind_sp): Delete.
(iq2000_unwind_pc): Delete.
(iq2000_dummy_id): Delete.
(iq2000_gdbarch_init): Don't register deleted functions with
gdbarch.
The general type_align method should be a suitable alternative to
nds32_type_align, so switch to use that.
The only change this will introduce is related to static fields in a
struct or union, the existing code doesn't take account of static
fields when computing the alignment for structs of unions, though this
is probably a bug - which would probably be exposed by the test case
gdb.cp/many-args.exp, though I don't have any way to test this target
right now.
gdb/ChangeLog:
* nds32-tdep.c (nds32_type_align): Delete.
(nds32_push_dummy_call): Use type_align instead.
Replaces use of arm_type_align with common type_align function.
Doing this fixes a bug in arm_type_align where static fields are
considered as part of the alignment calculation of a struct, which
results in arguments passed on the stack being misaligned, this bug
was causing a failure in gdb.cp/many-args.exp.
Part of the old arm_type_align is retained and used as the gdbarch
type align callback in order to correctly align vectors.
gdb/ChangeLog:
* arm-tdep.c (arm_type_align): Only handle vector override case.
(arm_push_dummy_call): Use type_align.
(arm_gdbarch_init): Register arm_type_align gdbarch function.
Replaces use of aarch64_type_align with common type_align function.
Doing this fixes a bug in aarch64_type_align where static fields are
considered as part of the alignment calculation of a struct, which
results in arguments passed on the stack being misaligned. This bug
is exposed in the new test gdb.cp/many-args.exp.
Part of the old aarch64_type_align is retained and used as the gdbarch
type align callback in order to correctly align vectors.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_type_align): Only handle vector override
case.
(pass_on_stack): Use type_align.
(aarch64_gdbarch_init): Register aarch64_type_align gdbarch
function.
gdb/testsuite/ChangeLog:
* gdb.cp/many-args.cc: New file.
* gdb.cp/many-args.exp: New file.
I noticed that one of the overloads of line_header::file_name_at is
unused. This patch removes it.
gdb/ChangeLog
2019-04-23 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (line_header::file_name_at): Remove unused
overload.
When running gdb.btrace/reconnect.exp with native-gdbserver, we run into:
...
FAIL: gdb.btrace/reconnect.exp: first: stepi 19
...
due to the fact that we're trying to match:
...
stepi 19^M
0x00007ffff7dd8b57 in _dl_start () from /lib64/ld-linux-x86-64.so.2^M
...
using pattern:
...
gdb_test "stepi 19" "0x.* in .* from target.*"
...
Fix this by changing the pattern to:
...
gdb_test "stepi 19" "0x.* in .* from .*"
...
Tested on x86_64-linux with native and native-gdbserver.
gdb/testsuite/ChangeLog:
2019-04-23 Tom de Vries <tdevries@suse.de>
PR gdb/24433
* gdb.btrace/reconnect.exp: Fix stepi 19 pattern.
The -m option of cc-with-tweaks.sh sets want_multi to true, invoking dwz like
this:
...
elif [ "$want_multi" = true ]; then
cp $output_file ${output_file}.alt
$DWZ -m ${output_file}.dwz "$output_file" ${output_file}.alt \
> /dev/null 2>&1
fi
...
The problem that is being solved here, is that we want to test dwz in
multifile mode, which requires more than one input file, while we only have
(at the scope of cc-with-tweaks.sh) one executable. We handle this by copying
the executable and offering this as a second input (and using a copy has the
additional benefit that it maximally enables dwz transformation).
However, after the dwz invocation, the copy is no longer used, and the
presence of the file actually causes a test regression:
...
FAIL: gdb.base/jit-so.exp: test jit-reader-load filename completion
...
Fix this by removing the superflous copy after dwz invocation.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-04-23 Tom de Vries <tdevries@suse.de>
PR gdb/24438
* contrib/cc-with-tweaks.sh: Remove superfluous .alt file after dwz
invocation.
Ubuntu/Debian defaults PIE to enabled. This causes the trace tests
to fall over due to variables being returned as "unavailable". The
tests were never designed to work with pie.
Simply ensure the nopie flag is always used for the failing tests.
This removes 100+ failures when running native-gdbserver on Ubuntu 18.04.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Use nopie flag.
* gdb.trace/circ.exp: Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/mi-trace-unavailable.exp: Likewise.
* gdb.trace/mi-traceframe-changed.exp: Likewise.
* gdb.trace/qtro.exp: Likewise.
* gdb.trace/read-memory.exp: Likewise.
* gdb.trace/report.exp: Likewise.
* gdb.trace/tfile.exp: Likewise.
* gdb.trace/tfind.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
DW_OP_addrx is the new name of DW_OP_GNU_addr_index, and DW_FORM_addrx
is the name of DW_FORM_addr_index in the Dwarf 5 standard. This is a small
step towards supporting Dwarf 5 in gdb.
Note: I could not find any tests specifically for *_GNU_addr_index, and
I did not add any new tests, please advise.
While reviewing
https://sourceware.org/ml/gdb-patches/2019-04/msg00141.html
I noticed that we relied heavily on global state through the
get_svr4_info function, which uses current_program_space. I thought we
could improve this (make things more explicit and easier to follow) by
- Making get_svr4_info accept a program_space parameter, making it
return the SVR4 info for that program space.
- Passing down the svr4_info object from callers as much as possible.
This means looking up the svr4_info for the appropriate program space at
the entry points of the solib-svr4.c file and passing it down. For now,
these entry points (most of them are "methods" of svr4_so_ops) rely on
current_program_space, but we can later try to change the target_so_ops
interface to pass down the program space.
gdb/ChangeLog:
* solib-svr4.c (get_svr4_info): Add pspace parameter.
(svr4_keep_data_in_core): Pass current_program_space to get_svr4_info.
(open_symbol_file_object): Likewise.
(svr4_default_sos): Add info parameter.
(svr4_read_so_list): Likewise.
(svr4_current_sos_direct): Adjust functions calls to pass down
info.
(svr4_current_sos_1): Add info parameter.
(svr4_current_sos): Call get_svr4_info, pass info down to
svr4_current_sos_1.
(svr4_fetch_objfile_link_map): Pass objfile->pspace to
get_svr4_info.
(svr4_in_dynsym_resolve_code): Pass current_program_space to
get_svr4_info.
(probes_table_htab_remove_objfile_probes): Pass objfile->pspace
to get_svr4_info.
(probes_table_remove_objfile_probes): Likewise.
(register_solib_event_probe): Add info parameter.
(solist_update_incremental): Pass info parameter down to
svr4_read_so_list.
(disable_probes_interface): Add info parameter.
(svr4_handle_solib_event): Pass current_program_space to
get_svr4_info. Adjust disable_probes_interface cleanup.
(svr4_create_probe_breakpoints): Add info parameter, pass it
down to register_solib_event_probe.
(svr4_create_solib_event_breakpoints): Add info parameter,
pass it down to svr4_create_probe_breakpoints.
(enable_break): Pass info down to
svr4_create_solib_event_breakpoints.
(svr4_solib_create_inferior_hook): Pass current_program_space to
get_svr4_info.
(svr4_clear_solib): Likewise.
On systems that use the probes-based solib interface, GDB misbehaves
if you run the "nosharelibrary" command, continue execution, and then
the program hits the shared library event breakpoint. On my system it
aborts like this:
(gdb) nosharedlibrary
(gdb) c
Continuing.
pure virtual method called
terminate called without an active exception
Aborted (core dumped)
Though it's really undefined behavior territory, caused by deferencing
a dangling solib event probe pointer.
I've observed this by running "nosharedlibrary" when stopped at the
entry point, but it should happen at any other point, if the program
does a dlopen/dlclose after.
The fix is to discard an objfile's probes from the svr4 probes table
when an objfile is about to be released.
New test included, works with both native and gdbserver testing.
Valgrind log:
(gdb) starti
(gdb) nosharedlibrary
(gdb) c
Continuing.
==24895== Invalid read of size 8
==24895== at 0x89E5FB: solib_event_probe_action(probe_and_action*) (solib-svr4.c:1735)
==24895== by 0x89E95A: svr4_handle_solib_event() (solib-svr4.c:1872)
==24895== by 0x8A7198: handle_solib_event() (solib.c:1274)
==24895== by 0x4E3407: bpstat_stop_status(address_space const*, unsigned long, thread_info*, target_waitstatus const*, bpstats*) (breakpoint.c:5407)
==24895== by 0x721F41: handle_signal_stop(execution_control_state*) (infrun.c:5685)
==24895== by 0x720B11: handle_inferior_event(execution_control_state*) (infrun.c:5129)
==24895== by 0x71DD93: fetch_inferior_event(void*) (infrun.c:3748)
==24895== by 0x7059C3: inferior_event_handler(inferior_event_type, void*) (inf-loop.c:43)
==24895== by 0x874DF0: remote_async_serial_handler(serial*, void*) (remote.c:14039)
==24895== by 0x894101: run_async_handler_and_reschedule(serial*) (ser-base.c:137)
==24895== by 0x8941E6: fd_event(int, void*) (ser-base.c:188)
==24895== by 0x67AFEF: handle_file_event(file_handler*, int) (event-loop.c:732)
==24895== Address 0x18b63860 is 0 bytes inside a block of size 136 free'd
==24895== at 0x4C2E616: operator delete(void*, unsigned long) (vg_replace_malloc.c:585)
==24895== by 0x8C6A12: stap_probe::~stap_probe() (stap-probe.c:124)
==24895== by 0x66F7DB: probe_key_free(bfd*, void*) (elfread.c:1382)
==24895== by 0x69B705: bfdregistry_callback_adaptor(void (*)(registry_container*, void*), registry_container*, void*) (gdb_bfd.c:131)
==24895== by 0x855A57: registry_clear_data(registry_data_registry*, void (*)(void (*)(registry_container*, void*), registry_container*, void*), registry_container*, registry_fields*) (registry.c:79)
==24895== by 0x855B01: registry_container_free_data(registry_data_registry*, void (*)(void (*)(registry_container*, void*), registry_container*, void*), registry_container*, registry_fields*) (registry.c:92)
==24895== by 0x69B783: bfd_free_data(bfd*) (gdb_bfd.c:131)
==24895== by 0x69C4BA: gdb_bfd_unref(bfd*) (gdb_bfd.c:609)
==24895== by 0x7CC33F: objfile::~objfile() (objfiles.c:651)
==24895== by 0x7CD559: objfile_purge_solibs() (objfiles.c:1021)
==24895== by 0x8A7132: no_shared_libraries(char const*, int) (solib.c:1252)
==24895== by 0x548E3D: do_const_cfunc(cmd_list_element*, char const*, int) (cli-decode.c:106)
==24895== Block was alloc'd at
==24895== at 0x4C2D42A: operator new(unsigned long) (vg_replace_malloc.c:334)
==24895== by 0x8C527C: handle_stap_probe(objfile*, sdt_note*, std::vector<probe*, std::allocator<probe*> >*, unsigned long) (stap-probe.c:1561)
==24895== by 0x8C5535: stap_static_probe_ops::get_probes(std::vector<probe*, std::allocator<probe*> >*, objfile*) const (stap-probe.c:1656)
==24895== by 0x66F71B: elf_get_probes(objfile*) (elfread.c:1365)
==24895== by 0x7EDD85: find_probes_in_objfile(objfile*, char const*, char const*) (probe.c:227)
==24895== by 0x4DF382: create_longjmp_master_breakpoint() (breakpoint.c:3275)
==24895== by 0x4F6562: breakpoint_re_set() (breakpoint.c:13828)
==24895== by 0x8A66AA: solib_add(char const*, int, int) (solib.c:1010)
==24895== by 0x89F7C6: enable_break(svr4_info*, int) (solib-svr4.c:2360)
==24895== by 0x8A104C: svr4_solib_create_inferior_hook(int) (solib-svr4.c:2992)
==24895== by 0x8A70B9: solib_create_inferior_hook(int) (solib.c:1215)
==24895== by 0x70C073: post_create_inferior(target_ops*, int) (infcmd.c:467)
==24895==
pure virtual method called
terminate called without an active exception
==24895==
==24895== Process terminating with default action of signal 6 (SIGABRT): dumping core
==24895== at 0x7CF3750: raise (raise.c:51)
==24895== by 0x7CF4D30: abort (abort.c:79)
==24895== by 0xB008F4: __gnu_cxx::__verbose_terminate_handler() (in build/gdb/gdb)
==24895== by 0xAFF845: __cxxabiv1::__terminate(void (*)()) (in build/gdb/gdb)
==24895== by 0xAFF890: std::terminate() (in build/gdb/gdb)
==24895== by 0xAFF95E: __cxa_pure_virtual (in build/gdb/gdb)
==24895== by 0x89E610: solib_event_probe_action(probe_and_action*) (solib-svr4.c:1735)
==24895== by 0x89E95A: svr4_handle_solib_event() (solib-svr4.c:1872)
==24895== by 0x8A7198: handle_solib_event() (solib.c:1274)
==24895== by 0x4E3407: bpstat_stop_status(address_space const*, unsigned long, thread_info*, target_waitstatus const*, bpstats*) (breakpoint.c:5407)
==24895== by 0x721F41: handle_signal_stop(execution_control_state*) (infrun.c:5685)
==24895== by 0x720B11: handle_inferior_event(execution_control_state*) (infrun.c:5129)
==24895==
Note, this little bit in the patch is just a cleanup that I noticed:
- lookup.prob = prob;
lookup.address = address;
That line isn't necessary because hashing/comparison only looks at the
address.
gdb/ChangeLog:
2019-04-22 Pedro Alves <palves@redhat.com>
* solib-svr4.c (svr4_free_objfile_observer): New.
(probe_and_action::objfile): New field.
(probes_table_htab_remove_objfile_probes)
(probes_table_remove_objfile_probes): New functions.
(register_solib_event_probe): Add 'objfile' parameter. Store it
in the new probe_and_action. Don't store the probe in 'lookup'.
(svr4_create_probe_breakpoints): Pass objfile to
register_solib_event_probe.
(_initialize_svr4_solib): Register a free_objfile observer.
gdb/testsuite/ChangeLog:
2019-04-22 Pedro Alves <palves@redhat.com>
* gdb.base/solib-probes-nosharedlibrary.c,
gdb.base/solib-probes-nosharedlibrary.exp: New files.
gdb/doc/ChangeLog:
2019-04-22 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Reverse Execution): Mention and xref process record
and replay. Mention remote and system emulators.
(Process Record and Replay): List supported architectures.
Mention that "record btrace" is only supported on Intel
processors.
This crash was detected when using GDB with the valgrind gdbserver.
To reproduce:
valgrind sleep 10000
In another window:
gdb
target remote | vgdb
p printf("make sleep print something\n")
=>
terminate called after throwing an instance of 'gdb_exception_error'
Aborted
The problem is that the valgrind gdbserver does not allow to change
registers when the inferior is blocked in a system call.
GDB then raises an exception. The exception causes the destructor
of
typedef std::unique_ptr<infcall_suspend_state, infcall_suspend_state_deleter>
infcall_suspend_state_up;
to be called. This destructor itself tries to restore the value of
the registers, and fails similarly. We must catch the exception in
the destructor to avoid crashing GDB.
If the destructor encounters a problem, no warning is produced if
there is an uncaught exception, as in this case, the user will already
be informed of a problem via this exception.
With this change, no crash anymore, and all the valgrind 3.15 tests
pass succesfully.
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferior.h (struct infcall_suspend_state_deleter):
Catch exception in destructor to avoid crash.
event-loop.c does not need to include common/queue.h, so this removes
it.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* event-loop.c: Don't include "common/queue.h".
This changes remote_notif_state::notif_queue to be a std::list and
updates all the uses.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* remote.c (remote_target): Use delete.
* remote-notif.h: Include <list>, not "common/queue.h".
(notif_client_p): Remove typedef.
(remote_notif_state): Add constructor, destructor, initializer.
<notif_queue>: Now a std::list.
(remote_notif_state_xfree): Don't declare.
* remote-notif.c (remote_notif_process, handle_notification)
(remote_notif_state_allocate): Update.
(~remote_notif_state): Rename from remote_notif_state_xfree.
This changes objfile::static_links to be an htab_up, so that ~objfile
no longer has to explicitly destroy it.
Tested by the buildbot.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Update.
* objfiles.c (objfile_register_static_link)
(objfile_lookup_static_link): Update
(~objfile) Don't delete static_links.
* objfiles.h (struct objfile) <static_links>: Now an htab_up.
Allow disabling source-highlight dependency autodetection even
it exists in the system. More details on problem of automatic
dependencies:
https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Automagic_dependencies
Noticed by Jeroen Roovers in https://bugs.gentoo.org/680238
* configure.ac: add --enable-source-highlight switch.
* configure: Regenerate.
* top.c (print_gdb_version): plumb --enable-source-highlight
status to "show configuration".
gdb/ChangeLog
2019-04-19 Sergei Trofimovich <siarheit@google.com>
* configure.ac: add --enable-source-highlight switch.
* configure: Regenerate.
* top.c (print_gdb_version): plumb --enable-source-highlight
status to "show configuration".
ada-lang.c is a bit too eager trying to decode unions in the Ada style
-- looking for discriminants and such. This causes crashes when
printing a non-Ada union in Ada mode, something that can easily happen
when printing a value from history or certain registers on AArch64.
This patch fixes the bug by changing ada-lang.c to only apply special
Ada treatment to types coming from an Ada CU. This in turn required a
couple of surprising changes.
First, some of the Ada code was already using HAVE_GNAT_AUX_INFO to
decide whether a type had already been fixed -- such types had
INIT_CPLUS_SPECIFIC called on them. This patch changes these spots to
use the "none" identifier instead.
This then required changing value_rtti_type to avoid changing the
language-specific object attached to an Ada type, which seems like a
good change regardless.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-04-19 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_is_variant_part, ada_to_fixed_type_1):
Check ADA_TYPE_P.
(empty_record, ada_template_to_fixed_record_type_1)
(template_to_static_fixed_type)
(to_record_with_fixed_variant_part): Use INIT_NONE_SPECIFIC.
* cp-abi.c (value_rtti_type): Check HAVE_CPLUS_STRUCT.
* gdbtypes.h (INIT_NONE_SPECIFIC, ADA_TYPE_P): New
macros.
gdb/testsuite/ChangeLog
2019-04-19 Tom Tromey <tromey@adacore.com>
* gdb.ada/ptype_union.c: New file.
* gdb.ada/ptype_union.exp: New file.
PR symtab/24423 points out that control characters in a source file
cause a hang in the "list" command, a regression introduced by the
styling changes.
This patch, from the PR, fixes the bug. I've included a minimal
change to the "list" test that exercises this code.
I recall that this bug was discussed on gdb-patches, and I thought
there was a patch there as well, but I was unable to find it.
gdb/ChangeLog
2019-04-19 Ilya Yu. Malakhov <malakhov@mcst.ru>
PR symtab/24423:
* source.c (print_source_lines_base): Advance "iter" when a
control character is seen.
gdb/testsuite/ChangeLog
2019-04-19 Tom Tromey <tromey@adacore.com>
PR symtab/24423:
* gdb.base/list0.h (foo): Add a control-l character.
This crash was detected when using GDB with the valgrind gdbserver.
To reproduce:
valgrind sleep 10000
In another window:
gdb
target remote | vgdb
p printf("make sleep print something\n")
=>
terminate called after throwing an instance of 'gdb_exception_error'
Aborted
The problem is that the valgrind gdbserver does not allow to change
registers when the inferior is blocked in a system call.
GDB then raises an exception. The exception causes the destructor
of
typedef std::unique_ptr<infcall_suspend_state, infcall_suspend_state_deleter>
infcall_suspend_state_up;
to be called. This destructor itself tries to restore the value of
the registers, and fails similarly. We must catch the exception in
the destructor to avoid crashing GDB.
If the destructor encounters a problem, no warning is produced if
there is an uncaught exception, as in this case, the user will already
be informed of a problem via this exception.
With this change, no crash anymore, and all the valgrind 3.15 tests
pass succesfully.
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferior.h (struct infcall_suspend_state_deleter):
Catch exception in destructor to avoid crash.
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (_initialize_cli_cmds): Move "shell" "!" alias
close to the add_com "shell".
When running break-probes.exp with native-gdbserver, we run into:
...
FAIL: gdb.base/break-probes.exp: run til our library loads (the program exited)
FAIL: gdb.base/break-probes.exp: call (int) foo(23)
...
due to the fact that we're trying to match:
...
Inferior loaded /data/gdb_versions/devel/build/gdb/testsuite/outputs/gdb.base\
/break-probes/break-probes-solib.so
...
using pattern:
...
Inferior loaded $sysroot$binfile_lib
...
which expands into:
...
Inferior loaded //data/gdb_versions/devel/build/gdb/testsuite/outputs/gdb.base\
/break-probes/break-probes-solib.so
...
Fix by setting sysroot to "" in local-board.exp.
Tested on x86_64-linux with native-gdbserver.
gdb/testsuite/ChangeLog:
2019-04-18 Tom de Vries <tdevries@suse.de>
PR gdb/24433
* boards/local-board.exp: Set sysroot to "".
It seemed to me that process_stratum_target::stratum ought to be
"final".
Tested by rebuilding, let me know what you think.
gdb/ChangeLog
2019-04-18 Tom Tromey <tromey@adacore.com>
* process-stratum-target.h (class process_stratum_target)
<stratum>: Add "final".
When debugging any of the testcases added by this commit, which do a
vfork in a thread with "set follow-fork-mode child" + "set
detach-on-fork on", we run into this assertion:
...
src/gdb/nat/x86-linux-dregs.c:146: internal-error: \
void x86_linux_update_debug_registers(lwp_info*): \
Assertion `lwp_is_stopped (lwp)' failed.
...
The assert is caused by the following: the vfork-child exit or exec
event is handled by handle_vfork_child_exec_or_exit, which calls
target_detach to detach from the vfork parent. During target_detach
we call linux_nat_target::detach, which:
#1 - stops all the threads
#2 - waits for all the threads to be stopped
#3 - detaches all the threads
However, during the second step we run into this code in
stop_wait_callback:
...
/* If this is a vfork parent, bail out, it is not going to report
any SIGSTOP until the vfork is done with. */
if (inf->vfork_child != NULL)
return 0;
...
and we don't wait for the threads to be stopped, which results in this
assert in x86_linux_update_debug_registers triggering during the third
step:
...
gdb_assert (lwp_is_stopped (lwp));
...
The fix is to reset the vfork parent's vfork_child field before
calling target_detach in handle_vfork_child_exec_or_exit. There's
already similar code for the other paths handled by
handle_vfork_child_exec_or_exit, so this commit refactors the code a
bit so that all paths share the same code.
The new tests cover both a vfork child exiting, and a vfork child
execing, since both cases would trigger the assertion.
The new testcases also exercise following the vfork children with "set
detach-on-fork off", since it doesn't seem to be tested anywhere.
Tested on x86_64-linux, using native and native-gdbserver.
gdb/ChangeLog:
2019-04-18 Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR gdb/24454
* infrun.c (handle_vfork_child_exec_or_exit): Reset vfork parent's
vfork_child field before calling target_detach.
gdb/testsuite/ChangeLog:
2019-04-18 Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR gdb/24454
* gdb.threads/vfork-follow-child-exec.c: New file.
* gdb.threads/vfork-follow-child-exec.exp: New file.
* gdb.threads/vfork-follow-child-exit.c: New file.
* gdb.threads/vfork-follow-child-exit.exp: New file.
After commit 35add35 ("gdb: Fix failure in gdb.base/complex-parts.exp
for x86-32"), dwarf2_init_complex_target_type can crash if "tt" is
nullptr. This patch avoids the problem by checking for this case.
No test case because I don't know a good way to write one; it was
found by an internal AdaCore test case that apparently uses a 16 bit
floating point type.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_init_complex_target_type): Check "tt"
against nullptr before use.
gdb/ChangeLog
2019-04-17 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (dwarf2_init_complex_target_type): Check "tt"
against nullptr before use.
All debug output needs to go via debug functions to ensure it writes to the
correct output stream.
gdb/ChangeLog:
* nat/linux-waitpid.c (linux_debug): Call debug_vprintf.
gdb/gdbserver/ChangeLog:
* ax.c (ax_vdebug): Call debug_printf.
* debug.c (debug_write): New function.
* debug.h (debug_write): New declaration.
* linux-low.c (sigchld_handler): Call debug_write.
A comment in debug.h (written in 2014) states: "We declare debug format
variables here, and debug_threads but no other debug content variables
(e.g., not remote_debug) because while this file is not currently used by
IPA it may be some day, and IPA may have its own set of debug content
variables".
This has resulted in remote_debug being declared in many .c/.h files
throughout gdbserver.
It would be much simplier to define it one place. The most logical place to
define it is in debug.h, surrounded by #define guards. If IPA is changed,
then at that point the variable can be moved elsewhere.
gdb/gdbserver/ChangeLog:
* debug.c (remote_debug): Add definition.
* debug.h (remote_debug): Add declaration.
* hostio.c (remote_debug): Remove declaration.
* remote-utils.c (struct ui_file): Likewise.
(remote_debug): Likewise.
* remote-utils.h (remote_debug): Likewise,
* server.c (remote_debug): Remove definition.
Some testsuite cases (gdb.cp/nsalias.exp for example) construct dwarf2
debug info for fake functions to test that this debug info is handled
correctly.
We currently get an error trying to read from an invalid address while
creating breakpoints for these fake functions.
Other targets allow creating breakpoints on invalid addresses, and
only error when GDB actually tries to insert the breakpoints.
In order to make RISC-V behave in the same way as other targets, this
commit makes the failure to read memory during breakpoint creation
non-fatal, we then expect to see a failure when GDB tries to insert
the breakpoint, just like other targets.
Tested with a riscv64-linux native testsuite run.
gdb/ChangeLog:
* riscv-tdep.c (riscv_breakpoint_kind_from_pc): Hanndle case where
code read might fail, assume 4-byte breakpoint in that case.
The AMD64 System V ABI specifies that when a function has a return type
classified as MEMORY, the caller provides space for the value and passes
the address to this space as the first argument to the function (before
even the "this" pointer). The classification of MEMORY is applied to
struct that are sufficiently large, or ones with unaligned fields.
The expression evaluator uses call_function_by_hand to call functions,
and the hand-built frame has to push arguments in a way that matches the
ABI of the called function. call_function_by_hand supports ABI-based
struct returns, based on the value of gdbarch_return_value, however on
AMD64 the implementation of the classifier incorrectly assumed that all
non-POD types (implemented as "all types with a base class") should be
classified as MEMORY and use the struct return.
This ABI mismatch resulted in issues when calling a function that returns
a class of size <16 bytes which has a base class, including issues such
as the "this" pointer being incorrect (as it was passed as the second
argument rather than the first).
This is now fixed by checking for field alignment rather than POD-ness,
and a testsuite is added to test expression evaluation for AMD64.
gdb/ChangeLog:
* amd64-tdep.c (amd64_classify_aggregate): Use cp_pass_by_reference
rather than a hand-rolled POD check when checking for forced MEMORY
classification.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-eval.cc: New file.
* gdb.arch/amd64-eval.exp: New file.
When writing registers to the kernel, check if regcache VG has been changed. If
so then update the thread's vector length, then write back the registers.
When reading registers from the kernel, ensure regcache VG register is updated.
The regcache registers should already be of the correct length.
Remove all the checks that error if the vector length has changed.
gdb/ChangeLog:
* aarch64-linux-nat.c (store_sveregs_to_thread): Set vector length.
* nat/aarch64-sve-linux-ptrace.c (aarch64_sve_set_vq): New function.
(aarch64_sve_regs_copy_to_reg_buf): Remove VG checks.
(aarch64_sve_regs_copy_from_reg_buf): Likewise.
* nat/aarch64-sve-linux-ptrace.h (aarch64_sve_set_vq): New declaration.
Override the thread_architecture method, similar to SPU. If the vector
length has changed, then find the arch using info, making sure the vector
length is passed down to the init routine.
In the init routine, ensure the arch has the correct vector length.
Example output. Program is stopped in thread 2, just before it calls prctl
to change the vector length
(gdb) info threads
Id Target Id Frame
1 Thread 0xffffbf6f4000 (LWP 3188) "sve_change" 0x0000ffffbf6ae130 in pthread_join ()
* 2 Thread 0xffffbf55e200 (LWP 3189) "sve_change" thread1 (arg=0xfeedface) at sve_change_size.c:28
(gdb) print $vg
$1 = 8
(gdb) print $z0.s.u
$2 = {623191333, 623191333, 623191333, 623191333, 0 <repeats 12 times>}
(gdb) n
29 int ret = prctl(PR_SVE_SET_VL, vl/2);
(gdb) n
30 printf ("Changed: ret\n", ret);
(gdb) print $vg
$4 = 4
(gdb) print $z0.s.u
$5 = {623191333, 623191333, 623191333, 623191333, 0, 0, 0, 0}
(gdb) thr 1
[Switching to thread 1 (Thread 0xffffbf6f4000 (LWP 3181))]
(gdb) print $vg
$6 = 8
(gdb) print $z0.s.u
$7 = {623191333, 623191333, 623191333, 623191333, 0 <repeats 12 times>}
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Add override.
* aarch64-tdep.c (aarch64_gdbarch_init): Ensure different tdesc for
each VQ.
Move the lookup_by_info to the top of the function to avoid unnecessarily
creating a new feature when the gdbarch already exists.
Add some additional cleanups that have no functional effect.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_gdbarch_init): Move gdbarch lookup.
The x86-32 ABI specifies 96-bit long double, this was causing a
failure on the test gdb.base/complex-parts.exp.
The problem is that GDB tries to find a builtin floating point type of
the correct size in order to reuse the name of that type as the name
for the components of the complex type being built.
Previously GDB was only aware of floating point types sized 32, 64, or
128 bits. This patch teaches GDB how to handle 96 bit floating point
type.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_init_complex_target_type): Handle complex
target types of size 96-bits, add some additional comments, and
check that the builtin type we found was the correct size.
gdb/ChangeLog:
2019-04-12 Eli Zaretskii <eliz@gnu.org>
* utils.c (prompt_for_continue): Don't restore the styling at the
end, as applied_style has the wrong value. This fixes styling in
long lists of file names that are interrupted by the "Continue?"
prompt.
The local board file ensures that the sysroot is always set to load
files from the local filesystem.
Add a gdbserver test to explicitly test the sysroot set to both the
remote target and the local filesystem.
gdb/testsuite/ChangeLog:
* gdb.server/sysroot.c: New test.
* gdb.server/sysroot.exp: New file.
* lib/gdbserver-support.exp (gdb_target_cmd): Add additional text
matching param.
The language_defn structure has an la_magic field, this used to be
used as a basic check that the language_defn structure had the
expected layout - at least the end of the structure was where we
expected it to be.
This feature only really makes sense if we imagine GDB dynamically
loading language support from dynamic libraries, where a version
mismatch might cause problems.
However, in current GDB language support is statically built into GDB,
and since this commit:
commit 47e77640be
Date: Thu Jul 20 18:28:01 2017 +0100
Make language_def O(1)
the existing (if pointless) check of the la_magic field was removed.
There now appears to be no use of the la_magic field, and I propose
that we delete it.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* ada-lang.c (ada_language_defn): Remove use of LANG_MAGIC.
* c-lang.c (c_language_defn): Likewise.
(cplus_language_defn): Likewise.
(asm_language_defn): Likewise.
(minimal_language_defn): Likewise.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* go-lang.c (go_language_defn): Likewise.
* language.c (unknown_language_defn): Likewise.
(auto_language_defn): Likewise.
* language.h (struct language_defn): Remove la_magic field.
(LANG_MAGIC): Delete.
* m2-lang.c (m2_language_defn): Remove use of LANG_MAGIC.
* objc-lang.c (objc_language_defn): Likewise.
* opencl-lang.c (opencl_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* rust-lang.c (rust_language_defn): Likewise.
Make use of the type_align function and remove riscv_type_alignment as
it is no longer needed. I tested this against a number of RV32 and
RV64 targets, and I also ran the tests with an assertion in place
checking that the old riscv_type_alignment function gives the same
answer as the common type_align function - it does, and all the tests
still pass.
gdb/ChangeLog:
* riscv-tdep.c (riscv_type_align): New function.
(riscv_type_alignment): Delete.
(riscv_arg_location): Use 'type_align'.
(riscv_gdbarch_init): Register riscv_type_align gdbarch function.
The current code in gdbtypes.c:type_align incorrectly returns 0 as the
alignment for a structure containing only static fields. After this
patch the correct value of 1 is returned. The gdb.base/align.exp test
is extended to cover this case.
gdb/ChangeLog:
* gdbtypes.c (type_align): A struct with no non-static fields also
has alignment of 1.
gdb/testsuite/ChangeLog:
* gdb.base/align.exp: Extend test to cover structures containing
only static fields.
This commit resolves a large number of failures in the test script
gdb.base/infcall-nested-structs.exp which were caused by GDB (for
RISC-V) incorrectly handling empty C++ structures when preparing
arguments for a dummy call, or collecting a return value.
The issue is further complicated in that there was a bug in GCC, such
that in some cases GCC would generate incorrect code when passing a
small structure that contained empty sub-structures. This was fixed
in GCC trunk on 5-March-2019, so in order to see the best results with
this patch you'll need a recent version of GCC.
Anything that used to work should continue to work after this patch,
regardless of GCC version being used.
The fix in this commit is that GDB now pays more attention to the
offset of fields within a structure when preparing arguments as in C++
an empty structure has a non-zero size, this is an example:
struct s1 { struct s2 { } empty; int f; };
We previously assumed that 'f' was at offset 0 inside type 's1',
however this is not the case in C++ as 's2' has size 1, and with
alignment 'f' is likely at some even bigger offset inside 's1'.
gdb/ChangeLog:
* riscv-tdep.c (riscv_call_arg_complex_float): Fix offset of first
component to 0.
(riscv_struct_info::riscv_struct_info): Initialise m_offsets
member.
(riscv_struct_info::analyse): New implementation using new
analyse_inner member function.
(riscv_struct_info::field_offset): New member function.
(riscv_struct_info::m_offsets): New member variable.
(riscv_struct_info::analyse_inner): New private member function,
takes the old implementation of riscv_struct_info::analyse but
extended to track field offsets.
(riscv_call_arg_struct): Update the struct folding special cases
to handle cases where empty C++ structs, which are non-zero
length, are found.
(riscv_arg_location): Initialise the length of each location, a
non-zero length now indicates the location is in use.
(riscv_push_dummy_call): Allow for the first location having a
non-zero offset when setting up arguments.
(riscv_return_value): Likewise, but for return values.
I noticed that the "msg" variable in internal_vproblem could be
"const". This seems like an improvement because it can wind up in
rodata.
Tested by rebuilding.
gdb/ChangeLog
2019-04-11 Tom Tromey <tromey@adacore.com>
* utils.c (internal_vproblem): Make "msg" const.
We can use CC_WITH_TWEAKS_FLAGS when cd-ing into the gdb build subdir and
invoking make check:
...
$ cd $objdir/gdb
$ make check \
RUNTESTFLAGS='--target_board=cc-with-tweaks' \
CC_WITH_TWEAKS_FLAGS='-z'
...
But when cd-ing into the top-level build dir and invoking make check-gdb
instead:
...
$ cd $objdir
$ make check-gdb \
RUNTESTFLAGS='--target_board=cc-with-tweaks' \
CC_WITH_TWEAKS_FLAGS='-z'
...
using CC_WITH_TWEAKS_FLAGS has no effect, because CC_WITH_TWEAKS_FLAGS is not
passed down from the top level Makefile.
Add cc-with-dwz.exp and cc-with-dwz-m.exp, that don't require
CC_WITH_TWEAKS_FLAGS to be set in the make invocation, allowing us to run these
test configurations from the toplevel build dir:
...
$ cd $objdir
$ make check-gdb \
RUNTESTFLAGS='--target_board=cc-with-dwz'
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-04-11 Tom de Vries <tdevries@suse.de>
* boards/cc-with-dwz-m.exp: New file.
* boards/cc-with-dwz.exp: New file.
* boards/cc-with-tweaks.exp: Note that check-gdb doesn't work.
A recent change made the AArch64 self tests resuse the saved regs
cache, rather than creating a new one. Ensure it is reset to default
values between tests.
Do this by splitting the reset functionality from trad_frame_alloc_saved_regs
into a new function.
Fixes selftest on AArch64.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_analyze_prologue_test): Reset saved regs.
* trad-frame.c (trad_frame_reset_saved_regs): New function.
(trad_frame_alloc_saved_regs): Call trad_frame_reset_saved_regs.
* trad-frame.h (trad_frame_reset_saved_regs): New declaration.
This commit fixes some failures in gdb.base/interrupt.exp
when debugging a 32-bit i386 linux inferior from an amd64 host.
When running the following test...
make check RUNTESTFLAGS="--target_board unix/-m32 interrupt.exp"
... without this commit, I see the following output:
FAIL: gdb.base/interrupt.exp: continue (the program exited)
FAIL: gdb.base/interrupt.exp: echo data
FAIL: gdb.base/interrupt.exp: Send Control-C, second time
FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
ERROR: Undefined command "".
ERROR: GDB process no longer exists
=== gdb Summary ===
When the test is run with this commit in place, we see 12 passes
instead. This is the desired behavior.
Analysis:
On Linux, when a syscall is interrupted by a signal, the syscall
may return -ERESTARTSYS when a signal occurs. Doing so indicates that
the syscall is restartable. Then, depending on settings associated
with the signal handler, and after the signal handler is called, the
kernel can then either return -EINTR or can cause the syscall to be
restarted. In this discussion, we are concerned with the latter
case.
On i386, the kernel returns this status via the EAX register.
When debugging a 32-bit (i386) process from a 64-bit (amd64)
GDB, the debugger fetches 64-bit registers even though the
process being debugged is 32-bit. Since we're debugging a 32-bit
target, only 32 bits are being saved in the register cache.
Now, ideally, GDB would save all 64-bits in the regcache and
then would be able to restore those same values when it comes
time to continue the target. I've looked into doing this, but
it's not easy and I don't see many benefits to doing so. One
benefit, however, would be that EAX would appear as a negative
value for doing syscall restarts.
At the moment, GDB is setting the high 32 bits of RAX (and other
registers too) to 0. So, when GDB restores EAX just prior to
a syscall restart, the high 32 bits of RAX are zeroed, thus making
it look like a positive value. For this particular purpose, we
need to sign extend EAX so that RAX will appear as a negative
value when EAX is set to -ERESTARTSYS. This in turn will cause
the signal handling code in the kernel to recognize -ERESTARTSYS
which will in turn cause the syscall to be restarted.
This commit is based on work by Jan Kratochvil from 2009:
https://sourceware.org/ml/gdb-patches/2009-11/msg00592.html
Jan's patch had the sign extension code in amd64-nat.c. Several
other native targets make use of this code, so it seemed better
to move the sign extension code to a linux specific file. I
also added similar code to gdbserver.
Another approach is to fix the problem in the kernel. Hui Zhu
tried to get a fix into the kernel back in 2014, but it was not
accepted. Discussion regarding this approach may be found here:
https://lore.kernel.org/patchwork/patch/457841/
Even if a fix were to be put into the kernel, we'd still need
some kind of fix in GDB in order to support older kernels.
Finally, I'll note that Fedora has been carrying a similar patch for
at least nine years. Other distributions, including RHEL and CentOS
have picked up this change and have been using it too.
gdb/ChangeLog:
* amd64-linux-nat.c (amd64_linux_collect_native_gregset): New
function.
(fill_gregset): Call amd64_linux_collect_native_gregset instead
of amd64_collect_native_gregset.
(amd64_linux_nat_target::store_registers): Likewise.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_fill_gregset): Sign extend EAX value
when using a 64-bit gdbserver.
This introduces a new iterator and range adapter for iteration over
the separate debug files of a given objfile. As in the current
approach, the requested objfile is returned first, followed by the
separate debug objfiles.
gdb/ChangeLog
2019-04-10 Tom Tromey <tom@tromey.com>
* symtab.c (lookup_global_symbol_from_objfile)
(lookup_symbol_in_objfile_from_linkage_name): Use the iterator.
* objfiles.h (class separate_debug_iterator): New.
(class separate_debug_range): New.
(struct objfile) <separate_debug_objfiles>: New method.
(objfile_separate_debug_iterate): Don't declare.
* objfiles.c (separate_debug_iterator::operator++): Rename from
objfile_separate_debug_iterate.
(objfile_relocate, objfile_rebase, objfile_has_symbols): Use the
iterator.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Use the
iterator.
While working on objfiles I noticed a typo in one comment, and another
comment that, as far as I can tell, has been obsolete for a very long
time.
gdb/ChangeLog
2019-04-10 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Remove old comment.
* objfiles.c (free_all_objfiles): Fix a typo.
The "object_files" macro is sometimes used when iterating over
objfiles. This patch removes a few such uses in favor of the new
range adapter.
gdb/ChangeLog
2019-04-10 Tom Tromey <tom@tromey.com>
* ia64-tdep.c (ia64_get_dyn_info_list): Use foreach.
* minsyms.c (lookup_minimal_symbol): Use foreach.
(lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name)
(lookup_minimal_symbol_solib_trampoline): Likewise.
* symfile.c (reread_symbols): Use foreach.
PR rust/24414 points out that the Rust lexer uses strtoul when lexing
an integer, and that this can give the wrong results in some
situations.
This patch changes it to use strtoulst, like most of the rest of gdb.
It also adds a self test.
Tested on x86-64 Fedora 29 using an i686 build.
gdb/ChangeLog
2019-04-09 Ivan Begert <ivanbegert@gmail.com>
Tom Tromey <tromey@adacore.com>
PR rust/24414:
* rust-exp.y (rust_parser::lex_number): Use strtoulst.
(rust_lex_int_test): Change "value" to be LONGEST.
(rust_lex_tests): Add test for long integer literal.
I noticed that find_thread_in_random duplicates the code in
find_thread_in_random, so this patch changes the latter to use the
former.
There are two other spots in gdb that do this, but to unify all of
them would require switching some code from using the "iterate over"
idiom to using iterators.
Another possible improvement is that find_thread_in_random could be
made single-pass using reservoir sampling.
Tested by the buildbot.
gdb/gdbserver/ChangeLog
2019-04-09 Tom Tromey <tromey@adacore.com>
* linux-low.c (select_event_lwp): Use find_thread_in_random.
I noticed a few spots where fake_pid_p is handled as an int, whereas
the field in struct inferior has type bool. This patch changes the
remaining places to use bool as well.
Tested by the buildbot.
gdb/ChangeLog
2019-04-09 Tom Tromey <tromey@adacore.com>
* remote.c (remote_target::remote_add_inferior): Change fake_pid_p
to bool.
(extended_remote_target::attach): Update.
(remote_target::remote_notice_new_inferior): Update.
(remote_target::add_current_inferior_and_thread): Update.
* inferior.c (exit_inferior_1): Use "false".
* corelow.c (add_to_thread_list): Make fake_pid_p bool.
When using the "start" command, GDB puts a temporary breakpoint on the
"main" symbol (we literally invoke the tbreak command). However, since
it does wild matching by default, it also puts a breakpoint on any C++
method or "main" function in a namespace. For example, when debugging
GDB, it creates a total of 24 locations:
(gdb) start
Temporary breakpoint 1 at 0x198c1e9: main. (24 locations)
as there are a bunch of methods called main in the selftests, such as
selftests::string_view::capacity_1::main()
If such method was called in the constructor of a global object, or a
function marked with the attribute "constructor", then we would stop at
the wrong place. Also, this causes a few extra symtabs (those that
contain the "wrong" mains) to be expanded for nothing.
The dummiest, most straightforward solution is to add -qualified when
invoking tbreak. With this patch, "start" creates a single-location
breakpoint, as expected.
I copied the start.exp test to start-cpp.exp and made it use a C++ test
file, which contains two main functions. The new test verifies that the
output of "start" is the output we get when we set a single-location
breakpoint.
gdb/ChangeLog:
* infcmd.c (run_command_1): Pass -qualified to tbreak when usind
the "start" command.
gdb/testsuite/ChangeLog:
* gdb.base/start-cpp.exp: New file.
* gdb.base/start-cpp.cc: New file.
This renaming was done to stay consistent with the naming of the new
gdb.InferiorThread.handle method. I had initially named it "thread_handle"
but Tom Tromey suggested just "handle".
The old name (thread_from_thread_handle) still works, but is marked as
deprecated in comments in the code as well as in the documentation.
I have some code which uses these functions. I very much like the
brevity of the new names.
gdb/doc/ChangeLog:
* python.texi (Inferiors In Python): Rename
Inferior.thread_from_thread_handle to Inferior.thread_from_handle.
Add note about the former being deprecated.
gdb/ChangeLog:
* python/py-inferior.c (infpy_thread_from_thread_handle):
Adjust comments to reflect renaming of thread_from_thread_handle
to thread_from_handle. Adjust keywords. Fix type error message.
(inferior_object_methods): Add thread_from_handle. Retain
thread_from_thread_handle, but mark it as deprecated.
testsuite/ChangeLog:
* gdb.python/py-thrhandle.exp: Adjust tests to call
thread_from_handle instead of thread_from_thread_handle.
InferiorThread.handle() returns a python bytes object. We'd like to
be able to pass the output of this function, a thread handle, to
Inferior.thread_from_thread_handle(). Up to now,
thread_from_thread_handle() expects to receive a gdb.Value input.
This commit adds support to also allow a python buffer object to be
passed as the handle.
infpy_thread_from_thread_handle() calls find_thread_by_handle() which
has the obvious functionality. It used to pass the thread handle via
a struct value pointer. I've revised this interface to instead pass a
gdb::array_view<const gdb_byte> object. (Thanks to Tom Tromey for
suggesting this data structure over an earlier version which passed a
gdb_byte pointer and length.)
gdb/ChangeLog:
* gdbthread.h (find_thread_by_handle): Revise declaration.
* thread.c (find_thread_by_handle): Likewise. Adjust
implementation too.
* python/py-inferior.c (infpy_thread_from_thread_handle): Add
support for buffer objects as handles.
- Explicitly include <string> for std::string.
- Use std::make_shared to construct gdb_exception::message instead of
operator new, avoiding one heap allocation (2 instead of 3). Add
'const char *fmt, va_list ap' parameters to
gdb_exception{,error,quit}'s ctors, and do the std::make_shared in
the gdb_exception ctor.
- gdb_exception_error's constructor does not need to have an 'enum
return_reason' parameter, since it is always RETURN_ERROR, by
definition.
- Similarly, gdb_exception_quit's contructor does not need to have
'enum return_reason'/'enum errors' parameters.
- In the gdb_exception_{quit,_error} ctors that take a gdb_exception
as argument, assert that they're being passed a gdb_exception object
of the right 'reason'.
gdb/ChangeLog:
2019-04-08 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (throw_exception): Don't create
named object to throw; throw directly.
(throw_it): Likewise. Don't initialize gdb_exception::message
here, with new; pass FMT and AP to the ctor instead.
* common/common-exceptions.h: Include <string>.
(gdb_exception::gdb_exception(enum return_reason, enum errors,
const char *, va_list)): New ctor. Use std::make_shared.
(gdb_exception_error::gdb_exception_error(enum return_reason, enum
errors)): Delete.
(gdb_exception_error::gdb_exception_error(enum errors, const char
*, va_list)): New.
(gdb_exception_error::gdb_exception_error(const gdb_exception &)):
Add assertion.
(gdb_exception_quit::gdb_exception_quit(enum return_reason, enum
errors)): Delete.
(gdb_exception_quit::gdb_exception_quit(const char *, va_list)): New.
(gdb_exception_quit::gdb_exception_quit(const gdb_exception &)):
Add assertion.
This makes exception throwing a bit more efficient, by removing some
copies.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.c (throw_exception): Rename from
throw_exception_cxx. Remove old copy. Make argument const.
(throw_it): Create and throw exception objects directly.
* common/common-exceptions.h (throw_exception): Make argument
const.
(struct gdb_exception_error): Add constructor.
(struct gdb_exception_quit): Add constructor.
After the rewriting to use try/catch, some of the exception code is
now unused. This patch removes that code.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (exception_rethrow): Don't declare.
(TRY_SJLJ): Update comment.
(TRY, CATCH, END_CATCH): Remove.
* common/common-exceptions.c (exception_rethrow): Remove.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
Now that cleanups have been removed, TRY/CATCH can't be SJLJ-based any
more. This patch simplifies the exception handling code, by removing
the non-working variants.
Note that the "pure" C++ exception handling code is removed as well; I
think the route forward must be to change exceptions to be
self-destructing, so that try_scope_depth can simply be removed.
Some longjmp-based code remains, as it is needed to throw an exception
through readline.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (GDB_XCPT_SJMP, GDB_XCPT_TRY)
(GDB_XCPT_RAW_TRY, GDB_XCPT): Remove.
(TRY, CATCH, END_CATCH): Remove some definitions.
* common/common-exceptions.c: Don't use GDB_XCPT.
(catcher_list_size): Remove.
(throw_exception, throw_it): Simplify.
I've broken "make info" a couple of times now, because I sometimes
forget to run "make info" after modifying a Texinfo file.
I don't know why gdb's "make all" doesn't build the info pages. I
suspect this was some Cygnus-local oddity back in the day.
This patch changes doc/Makefile.in so that the info pages are built by
"make all". As a point of reference, Automake has essentially always
worked this way. According to the Automake manual (I didn't
double-check) this is required by the GNU coding standards.
The first time I sent this patch, I mentioned that I wanted to look
into some existing bugs in bugzilla about missing "makeinfo".
However, today I tried and I discovered that BFD requires makeinfo,
and builds its info file as part of "all". So, I think this change
doesn't worsen the situation for users in any way, and can simply go
in.
gdb/doc/ChangeLog
2019-04-07 Tom Tromey <tom@tromey.com>
* Makefile.in (all): Depend on "info".
This patch fixes a build error due to a call to ppc_get_auxv that was
left over after linux_get_hwcap and linux_get_hwcap2 were introduced
in:
974c89e088 gdbserver: Add
linux_get_hwcap
Because the missing call fetched AT_PHDR and not AT_HWCAP,
linux_get_auxv is now visible.
This use also required ppc_get_auxv to return a status variable
indicating that the AT_PHDR entry was not found separately from the
actual value of of the auxv entry. Therefore, the new linux_get_auxv
function is changed to return a status variable and write the entry
value to a pointer passed as an argument.
Note that linux_get_hwcap and linux_get_hwcap2 still use the return
value as both an indicator of that the entry wasn't found and as the
actual value of the entry.
gdb/gdbserver/ChangeLog:
2019-04-05 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-low.c (linux_get_auxv): Remove static. Return auxv entry
value in argument pointer, return 1 if the entry is found and 0
otherwise. Move comment.
(linux_get_hwcap, linux_get_hwcap2): Use modified linux_get_auxv.
* linux-low.h (linux_get_auxv): Declare.
* linux-ppc-low.c (is_elfv2_inferior): Use linux_get_auxv.
I noticed that "gdbserver --help" contains a few metasyntactic
variables that aren't in upper-case. This patch fixes them to conform
to the GNU standard.
gdb/gdbserver/ChangeLog
2019-04-05 Tom Tromey <tromey@adacore.com>
* server.c (gdbserver_usage): Use upper-case for metasyntactic
variables.
This introduces a new "type_stack" class, and moves all the parser
type stack handling to this class. Parsers that wish to use this
facility must now instantiate this class somehow. I chose this
approach because a minority of the existing parsers require this.
gdb/ChangeLog
2019-04-04 Tom Tromey <tom@tromey.com>
* type-stack.h: New file.
* type-stack.c: New file.
* parser-defs.h (enum type_pieces, union type_stack_elt): Move to
type-stack.h.
(insert_into_type_stack, insert_type, push_type, push_type_int)
(insert_type_address_space, pop_type, pop_type_int)
(pop_typelist, pop_type_stack, append_type_stack)
(push_type_stack, get_type_stack, push_typelist)
(follow_type_instance_flags, follow_types): Don't declare.
* parse.c (type_stack): Remove global.
(parse_exp_in_context): Update.
(insert_into_type_stack, insert_type, push_type, push_type_int)
(insert_type_address_space, pop_type, pop_type_int)
(pop_typelist, pop_type_stack, append_type_stack)
(push_type_stack, get_type_stack, push_typelist)
(follow_type_instance_flags, follow_types): Remove (moved to
type-stack.c).
* f-exp.y (type_stack): New global.
Update rules.
(push_kind_type, f_parse): Update.
* d-exp.y (type_stack): New global.
Update rules.
(d_parse): Update.
* c-exp.y (struct c_parse_state) <type_stack>: New member.
Update rules.
* Makefile.in (COMMON_SFILES): Add type-stack.c.
(HFILES_NO_SRCDIR): Add type-stack.h.
This removes the "paren_depth" global. In most cases, it is made into
a static global in a given parser. I consider this a slight
improvement, because it makes it clear that the variable isn't used
for communication between different modules of gdb. The one exception
is the Rust parser, which already incorporates all local state into a
transient object; in this case the parser depth is now a member.
gdb/ChangeLog
2019-04-04 Tom Tromey <tom@tromey.com>
* rust-exp.y (struct rust_parser) <paren_depth>: New member.
(rustyylex, rust_lex_test_init, rust_lex_test_one)
(rust_lex_test_sequence, rust_lex_test_push_back): Update.
* parser-defs.h (paren_depth): Don't declare.
* parse.c (paren_depth): Remove global.
(parse_exp_in_context): Update.
* p-exp.y (paren_depth): New global.
(pascal_parse): Initialize it.
* m2-exp.y (paren_depth): New global.
(m2_parse): Initialize it.
* go-exp.y (paren_depth): New global.
(go_parse): Initialize it.
* f-exp.y (paren_depth): New global.
(f_parse): Initialize it.
* d-exp.y (paren_depth): New global.
(d_parse): Initialize it.
* c-exp.y (paren_depth): New global.
(c_parse): Initialize it.
* ada-lex.l (paren_depth): New global.
(lexer_init): Initialize it.
This makes a new base class, expr_builder, for parser_state. This
separates the state needed to construct an expression from the state
needed by the parsers.
gdb/ChangeLog
2019-04-04 Tom Tromey <tom@tromey.com>
* gdbarch.h, gdbarch.c: Rebuild.
* gdbarch.sh (dtrace_parse_probe_argument): Change type.
* stap-probe.h:
(struct stap_parse_info): Replace "parser_state" with
"expr_builder".
* parser-defs.h (struct expr_builder): Rename from "parser_state".
(parser_state): New class.
* parse.c (expr_builder): Rename.
(expr_builder::release): Rename.
(write_exp_elt, write_exp_elt_opcode, write_exp_elt_sym)
(write_exp_elt_msym, write_exp_elt_block, write_exp_elt_objfile)
(write_exp_elt_longcst, write_exp_elt_floatcst)
(write_exp_elt_type, write_exp_elt_intern, write_exp_string)
(write_exp_string_vector, write_exp_bitstring)
(write_exp_msymbol, mark_struct_expression)
(write_dollar_variable)
(insert_type_address_space, increase_expout_size): Replace
"parser_state" with "expr_builder".
* dtrace-probe.c: Replace "parser_state" with "expr_builder".
* amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Replace
"parser_state" with "expr_builder".
This changes parse_language into a method of parser_state. This patch
was written by a script.
gdb/ChangeLog
2019-04-04 Tom Tromey <tom@tromey.com>
* rust-exp.y: Replace "parse_language" with method call.
* p-exp.y:
(yylex): Replace "parse_language" with method call.
* m2-exp.y:
(yylex): Replace "parse_language" with method call.
* go-exp.y (classify_name): Replace "parse_language" with method
call.
* f-exp.y (yylex): Replace "parse_language" with method call.
* d-exp.y (lex_one_token): Replace "parse_language" with method
call.
* c-exp.y:
(lex_one_token, classify_name, yylex): Replace "parse_language"
with method call.
* ada-exp.y (find_primitive_type, type_char)
(type_system_address): Replace "parse_language" with method call.
All the real (not test) uses of parser_state pass 10 as the
"initial_size" parameter, and it seems to me that there's no real
reason to require callers to set this. This patch removes this
parameter.
gdb/ChangeLog
2019-04-04 Tom Tromey <tom@tromey.com>
* dtrace-probe.c (dtrace_probe::build_arg_exprs): Update.
* stap-probe.c (stap_parse_argument): Update.
* stap-probe.h (struct stap_parse_info) <stap_parse_info>: Remove
initial_size parameter.
* rust-exp.y (rust_lex_tests): Update.
* parse.c (parser_state): Update.
(parse_exp_in_context): Update.
* parser-defs.h (struct parser_state) <parser_state>: Remove
"initial_size" parameter.
increase_expout_size is only called from parse.c, and probably only
should be. This makes it "static". Tested by rebuilding.
gdb/ChangeLog
2019-04-04 Tom Tromey <tom@tromey.com>
* parser-defs.h (increase_expout_size): Don't declare.
* parse.c (increase_expout_size): Now static.
Recent commit c29705b71a removed an incomplete
local implementation in favor of 'target_waitstatus_to_string' (thanks!), but
introduced a small typing error:
In file included from [...]/gdb/gnu-nat.c:24:0:
[...]/gdb/gnu-nat.c: In member function 'virtual ptid_t gnu_nat_target::wait(ptid_t, target_waitstatus*, int)':
[...]/gdb/gnu-nat.c:1652:43: error: cannot convert 'target_waitstatus**' to 'const target_waitstatus*' for argument '1' to 'std::__cxx11::string target_waitstatus_to_string(const target_waitstatus*)'
target_waitstatus_to_string (&status).c_str ());
^
[...]/gdb/gnu-nat.h:119:32: note: in definition of macro 'debug'
__FILE__ , __LINE__ , ##args); } while (0)
^~~~
[...]/gdb/gnu-nat.c:1650:3: note: in expansion of macro 'inf_debug'
inf_debug (inf, "returning ptid = %s, %s",
^~~~~~~~~
gdb/
* gnu-nat.c (gnu_nat_target::wait): Fix
target_waitstatus_to_string call.
If an convenience function is defined in python (or guile), then
currently this will not work in Fortran, instead the user is given
this message:
(gdb) set language fortran
(gdb) p $myfunc (3)
Cannot perform substring on this type
Compare this to C:
(gdb) set language c
(gdb) p $myfunc (3)
$1 = 1
After this patch we see the same behaviour in both C and Fortran.
I've extended the test to check that all languages can call the
convenience functions - only Fortran was broken.
When calling convenience functions in Fortran we don't need to perform
the same value preparation (passing by pointer) that we would for
calling a native function - passing the real value is fine.
gdb/ChangeLog:
* eval.c (evaluate_subexp_standard): Handle internal functions
during Fortran function call handling.
gdb/testsuite/ChangeLog:
* gdb.python/py-function.exp: Check calling helper function from
all languages.
* lib/gdb.exp (gdb_supported_languages): New proc.
Add two new internal functions $_cimag and $_creal that extract the
imaginary and real parts of a complex value.
These internal functions can take a complex value of any type 'float
complex', 'double complex', or 'long double complex' and return a
suitable floating point value 'float', 'double', or 'long double'.
So we can now do this:
(gdb) p z1
$1 = 1.5 + 4.5 * I
(gdb) p $_cimag (z1)
$4 = 4.5
(gdb) p $_creal (z1)
$4 = 1.5
The components of a complex value are not strictly named types in
DWARF, as the complex type is itself the base type. However, once we
are able to extract the components it makes sense to be able to ask
what the type of these components is and get a sensible answer back,
rather than the error we would currently get. Currently GDB says:
(gdb) ptype z1
type = complex double
(gdb) p $_cimag (z1)
$4 = 4.5
(gdb) ptype $
type = <invalid type code 9>
With the changes in dwarf2read.c, GDB now says:
(gdb) ptype z1
type = complex double
(gdb) p $_cimag (z1)
$4 = 4.5
(gdb) ptype $
type = double
Which seems to make more sense.
gdb/ChangeLog:
* NEWS: Mention new internal functions.
* dwarf2read.c (dwarf2_init_complex_target_type): New function.
(read_base_type): Use dwarf2_init_complex_target_type.
* value.c (creal_internal_fn): New function.
(cimag_internal_fn): New function.
(_initialize_values): Register new internal functions.
gdb/doc/ChangeLog:
* gdb.texinfo (Convenience Funs): Document '$_creal' and
'$_cimag'.
gdb/testsuite/ChangeLog:
* gdb.base/complex-parts.c: New file.
* gdb.base/complex-parts.exp: New file.
The test gdb.threads/watchthreads-reorder.exp verifies that the
'set debug infrun 1' debug output does not crash GDB.
Under high load, the test can still cause a GDB internal error (see details
below).
This patch fixes this crash, and improves/factorises some wait kind traces.
Tested on debian/amd64 + run one test with 'set debug infrun 1'.
Changes compared to the first version:
* Handles the suggestions of Kevin to trace the relevant elements
of the wait status (this is done by calling target_waitstatus_to_string).
* Some other changes to factorise wait status tracing.
Note that using target_waitstatus_to_string instead of the 'locally printed'
status kind strings means that debug trace that was using strings such as:
"EXITED" or "TARGET_WAITKIND_EXITED"
will now use what is printed by target_waitstatus_to_string e.g.
"exited".
gdb/ChangeLog
2019-04-01 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* infrun.c (stop_all_threads): If debug_infrun, always
trace the wait status after wait_one, using
target_waitstatus_to_string and target_pid_to_str.
(handle_inferior_event): Replace various trace of
wait status kind by a single trace.
* gdb/gnu-nat.c (gnu_nat_target::wait): Replace local
wait status kind image by target_waitstatus_to_string.
* target/waitstatus.c (target_waitstatus_to_string): Fix
obsolete comment.
(top-gdb) bt
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007f3d54a0642a in __GI_abort () at abort.c:89
#2 0x0000555c24c60e66 in dump_core () at ../../fixleaks/gdb/utils.c:201
#3 0x0000555c24c63d49 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_list_tag __va_list_tag *) (problem=problem@entry=0x555c25338d40 <internal_error_problem>, file=<optimized out>, line=287,
fmt=<optimized out>, ap=<optimized out>) at ../../fixleaks/gdb/utils.c:411
#4 0x0000555c24c63eab in internal_verror (file=<optimized out>, line=<optimized out>, fmt=<optimized out>,
ap=<optimized out>) at ../../fixleaks/gdb/utils.c:436
#5 0x0000555c249e8c22 in internal_error (file=file@entry=0x555c24e0f2ad "../../fixleaks/gdb/inferior.c",
line=line@entry=287, fmt=<optimized out>) at ../../fixleaks/gdb/common/errors.c:55
#6 0x0000555c247d3f5c in find_inferior_pid (pid=<optimized out>) at ../../fixleaks/gdb/inferior.c:287
#7 0x0000555c24ad2248 in find_inferior_pid (pid=<optimized out>) at ../../fixleaks/gdb/inferior.c:302
#8 find_inferior_ptid (ptid=...) at ../../fixleaks/gdb/inferior.c:301
#9 0x0000555c24c35f25 in find_thread_ptid (ptid=...) at ../../fixleaks/gdb/thread.c:522
#10 0x0000555c24b0ab4d in thread_db_target::pid_to_str[abi:cxx11](ptid_t) (
this=0x555c2532e3e0 <the_thread_db_target>, ptid=...) at ../../fixleaks/gdb/linux-thread-db.c:1637
#11 0x0000555c24c2f420 in target_pid_to_str[abi:cxx11](ptid_t) (ptid=...) at ../../fixleaks/gdb/target.c:2083
#12 0x0000555c24ad9cab in stop_all_threads () at ../../fixleaks/gdb/infrun.c:4373
#13 0x0000555c24ada00f in stop_waiting (ecs=<optimized out>) at ../../fixleaks/gdb/infrun.c:7464
#14 0x0000555c24adc401 in process_event_stop_test (ecs=ecs@entry=0x7ffc9402d9d0) at ../../fixleaks/gdb/infrun.c:6181
...
(top-gdb) fr 12
#12 0x0000555c24ad9cab in stop_all_threads () at ../../fixleaks/gdb/infrun.c:4373
(top-gdb) p event_ptid
$5 = {m_pid = 25419, m_lwp = 25427, m_tid = 0}
(top-gdb) p ptid
$6 = {m_pid = 0, m_lwp = 0, m_tid = 0}
(top-gdb) p ws
$7 = {kind = TARGET_WAITKIND_THREAD_EXITED, value = {integer = 0, sig = GDB_SIGNAL_0, related_pid = {m_pid = 0,
m_lwp = 0, m_tid = 0}, execd_pathname = 0x0, syscall_number = 0}}
(top-gdb)
The gdb.log corresponding to the above crash is:
(gdb) PASS: gdb.threads/watchthreads-reorder.exp: reorder1: set debug infrun 1
continue
Continuing.
infrun: clear_proceed_status_thread (Thread 0x7ffff7fcfb40 (LWP 25419))
infrun: clear_proceed_status_thread (Thread 0x7ffff7310700 (LWP 25427))
infrun: clear_proceed_status_thread (Thread 0x7ffff6b0f700 (LWP 25428))
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming Thread 0x7ffff7fcfb40 (LWP 25419)
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7fcfb40 (LWP 25419)] at 0x7ffff7344317
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming Thread 0x7ffff7310700 (LWP 25427)
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7310700 (LWP 25427)] at 0x5555555553d7
infrun: prepare_to_wait
infrun: proceed: resuming Thread 0x7ffff6b0f700 (LWP 25428)
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff6b0f700 (LWP 25428)] at 0x5555555554c8
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
Joining the threads.
[Thread 0x7ffff6b0f700 (LWP 25428) exited]
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 25419.25419.0 [Thread 0x7ffff7fcfb40 (LWP 25419)],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x555555555e50
infrun: context switch
infrun: Switching context from Thread 0x7ffff6b0f700 (LWP 25428) to Thread 0x7ffff7fcfb40 (LWP 25419)
infrun: BPSTAT_WHAT_STOP_NOISY
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: Thread 0x7ffff7fcfb40 (LWP 25419) not executing
infrun: Thread 0x7ffff7310700 (LWP 25427) executing, need stop
[Thread 0x7ffff7310700 (LWP 25427) exited]
infrun: target_wait (-1.0.0, status) =
infrun: 25419.25427.0 [LWP 25427],
infrun: status->kind = thread exited, status = 0
infrun: infrun_async(0)
../../fixleaks/gdb/inferior.c:287: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/watchthreads-reorder.exp: reorder1: continue to breakpoint: break-at-exit (GDB internal error)
Resyncing due to internal error.
n
infrun: infrun_async(1)
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
infrun: infrun_async(0)
../../fixleaks/gdb/inferior.c:287: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n) y
add_partial_subprogram does not handle DW_AT_ranges, while the full
symtab reader does. This can lead to discrepancies where a function
is not put into a partial symtab, and so is not available to "break"
and the like -- but is available if the full symtab has somehow been
read.
This patch fixes the bug by arranging to read DW_AT_ranges when
reading partial DIEs.
This is PR symtab/23331.
The new test case is derived from dw2-ranges-func.exp, which is why I
kept the copyright dates.
gdb/ChangeLog
2019-04-01 Tom Tromey <tromey@adacore.com>
PR symtab/23331:
* dwarf2read.c (partial_die_info::read): Handle DW_AT_ranges.
gdb/testsuite/ChangeLog
2019-04-01 Tom Tromey <tromey@adacore.com>
PR symtab/23331:
* gdb.dwarf2/dw2-ranges-main.c: New file.
* gdb.dwarf2/dw2-ranges-psym.c: New file.
* gdb.dwarf2/dw2-ranges-psym.exp: New file.
When the user exits GDB, we might still have some allocated values in
the chain, which, in specific scenarios, can cause problems when GDB
attempts to destroy them in "quit_force". For example, see the bug
reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1690120
And the thread starting at:
https://sourceware.org/ml/gdb-patches/2019-03/msg00475.html
Message-ID: <87r2azkhmq.fsf@redhat.com>
In order to avoid that, and to be more aware of our allocated
resources, this commit implements a new function "finalize_values" and
calls it from inside "quit_force".
Tested by the BuildBot.
2019-04-01 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* top.c (quit_force): Call 'finalize_values'.
* value.c (finalize_values): New function.
* value.h (finalize_values): Declare.
The str () function, called on a gdb.Value instance, produces a string
representation similar to what can be achieved with the print command,
but it doesn't allow to specify additional formatting settings, for
instance disabling pretty printers.
This patch introduces a new format_string () method to gdb.Value which
allows specifying more formatting options, thus giving access to more
features provided by the internal C function common_val_print ().
gdb/ChangeLog:
2019-04-01 Marco Barisione <mbarisione@undo.io>
Add gdb.Value.format_string ().
* python/py-value.c (copy_py_bool_obj):
(valpy_format_string): Add gdb.Value.format_string ().
* NEWS: Document the addition of gdb.Value.format_string ().
gdb/doc/ChangeLog:
2019-04-01 Marco Barisione <mbarisione@undo.io>
* python.texi (Values From Inferior): Document
gdb.Value.format_string ().
gdb/testsuite/ChangeLog:
2019-04-01 Marco Barisione <mbarisione@undo.io>
Test gdb.Value.format_string ().
* gdb.python/py-format-string.exp: New test.
* gdb.python/py-format-string.c: New file.
* gdb.python/py-format-string.py: New file.
I noticed that the help for "info addr" did not include a "usage"
line; and when adding it I went through and fixed a few minor issues
in printcmd.c:
* Added usage lines to all commands
* Updated the help text for some commands
* Changed some help to use upper case metasyntactic variables
* Removed some dead code
Regression tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-29 Tom Tromey <tromey@adacore.com>
* printcmd.c (_initialize_printcmd): Add usage lines. Update some
help text. Remove dead code.
gdb/testsuite/ChangeLog
2019-03-29 Tom Tromey <tromey@adacore.com>
* gdb.base/help.exp: Tighten apropos regexp.
This is the fortran part of the patch, including tests, which
are essentially unchanged from Siddhesh's original 2012 submission:
https://sourceware.org/ml/gdb-patches/2012-08/msg00562.html
There is, however, one large departure. In the above thread,
Jan pointed out problems with GCC debuginfo for -m32 builds
(filed usptream as gcc/54934). After investigating the issue,
I am dropping the hand-tweaked assembler source file to workaround
this case.
While I would normally do something to accommodate this, in
this case, given the ubiquity of 64-bit systems today (where
the tests pass) and the apparent lack of urgency on the compiler
side (by users), I don't think the additional complexity and
maintenance costs are worth it. It will be very routinely tested
on 64-bit systems. [For example, at Red Hat, we always
test -m64 and -m32 configurations for all GDB releases.]
gdb/ChangeLog:
From Siddhesh Poyarekar:
* f-lang.h (f77_get_upperbound): Return LONGEST.
(f77_get_lowerbound): Likewise.
* f-typeprint.c (f_type_print_varspec_suffix): Expand
UPPER_BOUND and LOWER_BOUND to LONGEST. Use plongest to format
print them.
(f_type_print_base): Expand UPPER_BOUND to LONGEST. Use
plongest to format print it.
* f-valprint.c (f77_get_lowerbound): Return LONGEST.
(f77_get_upperbound): Likewise.
(f77_get_dynamic_length_of_aggregate): Expand UPPER_BOUND,
LOWER_BOUND to LONGEST.
(f77_create_arrayprint_offset_tbl): Likewise.
gdb/testsuite/ChangeLog:
* gdb.fortran/array-bounds.exp: New file.
* gdb.fortran/array-bounds.f90: New file.
This series is revisit of Siddhesh Poyarekar's patch from back in
2012. The last status on the patch is in the following gdb-patches
thread:
https://sourceware.org/ml/gdb-patches/2012-08/msg00562.html
It appears that Tom approved the patch, but Jan had some issues
with a compiler error that made the test fail on -m32 test runs.
He wrote up a hand-tweaked .S file to deal with it. Siddesh said
he would update tests. Then nothing.
Siddesh and Jan have both moved on since.
The patch originally required a large precursor patch to work.
I have whittled this down to/rewritten the bare minimum, and this
first patch is the result, changing the type of TYPE_LENGTH
to ULONGEST from unsigned int.
The majority of the changes involve changing printf format
strings to use %s and pulongest instead of %d.
gdb/ChangeLog:
* ada-lang.c (ada_template_to_fixed_record_type_1): Use
%s/pulongest for TYPE_LENGTH instead of %d in format
strings.
* ada-typerint.c (ada_print_type): Likewise.
* amd64-windows-tdep.c (amd64_windows_store_arg_in_reg): Likewise.
* compile/compile-c-support.c (generate_register_struct): Likewise.
* gdbtypes.c (recursive_dump_type): Likewise.
* gdbtypes.h (struct type) <length>: Change type to ULONGEST.
* m2-typeprint.c (m2_array): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* riscv-tdep.c (riscv_type_alignment): Cast second argument
to std::min to ULONGEST.
* symmisc.c (print_symbol): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* tracepoint.c (info_scope_command): Likewise.
* typeprint.c (print_offset_data::update)
(print_offset_data::finish): Likewise.
* xtensa-tdep.c (xtensa_store_return_value)
(xtensa_push_dummy_call): Likewise.
DWORD type is not a long on 64-bit Cygwin, because that it is LP64.
Explicitly cast DWORD values to unsigned long and use an appropriate
format.
gdb/ChangeLog:
2019-03-28 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (display_selector): Fixed format specifications
for 64-bit Cygwin.
Similarly to multi-arch-exec.exp, increase the alarm timer to avoid
test blocking under high load or with a slow gdb.
2019-03-28 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.multi/multi-term-settings.c (main): Increase alarm timer.
When running multi-arch-exec.exp under valgrind, the test succeeds
when the machine is not loaded, but blocks when the machine is highly
loaded (e.g. when running the testsuite with valgrind with -j X
where X is one more than the nr of available cores).
The problem is that the hello program dies too early due to the alarm (30).
So, increase the alarm timer.
Note that this does not make the test take longer (it takes about
3.5 seconds on my system). As I understand, the alarm is just there
to avoid hello staying there forever in case of another problem.
2019-03-28 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.multi/hello.c (main): Increase alarm timer.
When running under valgrind, multi-arch-exec.exp blocks forever.
Some (painful) investigation shows this is due to valgrind slowing
down GDB, and GDB has to output some messages at a different time,
when GDB does not have the terminal for output.
To reproduce the problem, you need to slow down GDB.
It can be reproduced by:
cd gdb/testsuite/outputs/gdb.multi/multi-arch-exec/
../../../../gdb -ex 'set debug lin-lwp 1' -ex 'break all_started' -ex 'run' ./2-multi-arch-exec
The above stops at a breakpoint. Do continue.
GDB is then suspended because of SIGTTOU.
The stacktrace that leads to the hanging GDB is:
(top-gdb) bt
at ../../binutils-gdb/gdb/exceptions.c:130
....
Alternatively, the same happens when doing
strace -o s.out ../../../../gdb -ex 'break all_started' -ex 'run' ./2-multi-arch-exec
And of course, valgrind is also sufficiently slowing down GDB to
reproduce this :).
Fix this by calling target_terminal::ours_for_output ();
at the beginning of follow_exec.
Note that all this terminal handling is not very clear to me:
* Some code takes the terminal, and then takes care to give it back to the inferior
if the terminal was belonging to the inferior.
(e.g. annotate_breakpoints_invalid).
* some code takes the terminal, but does not give it back
(e.g. update_inserted_breakpoint_locations).
* some code takes it, and unconditionally gives it back
(e.g. handle_jit_event)
* here and there, we also find
gdb::optional<target_terminal::scoped_restore_terminal_state> term_state;
before a (sometimes optional) call to ours_for_output.
And such calls to ours_for_output is sometimes protected by:
if (target_supports_terminal_ours ())
(e.g. exceptions.c: print_flush).
but most of the code calls it without checking if the target supports it.
* some code is outputting some errors, but only takes the terminal
after. E.g. infcmd.c: prepare_one_step
gdb/ChangeLog
2019-03-28 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* infrun.c (follow_exec): Call target_terminal::ours_for_output.
This patch fixes a problem on nios2-linux-gnu with stepping past the
kernel helper __kuser_cmpxchg, which was exposed by the testcase
gdb.threads/watchpoint-fork.exp. The kernel maps this function into
user space on an unwritable page. In this testcase, the cmpxchg
helper is invoked indirectly from the setbuf call in the test program.
Since this target lacks hardware breakpoint/watchpoint support, GDB
tries to single-step through the program by setting software
breakpoints, and was just giving an error when it reached the function
on the unwritable page.
The solution here is to always step over the call instead of stepping
into it; cmpxchg is supposed to be an atomic operation so this
behavior seems reasonable. The hook in nios2_get_next_pc is somewhat
generic, but at present cmpxchg is the only helper provided by the
Linux kernel that is invoked by an ordinary function call. (Signal
return trampolines also go through the unwritable page but not by a
function call.)
Fixing this issue also revealed that the testcase needs a much larger
timeout factor when software single-stepping is used. That has also
been fixed in this patch.
gdb/ChangeLog
2019-03-28 Sandra Loosemore <sandra@codesourcery.com>
* nios2-tdep.h (struct gdbarch_tdep): Add is_kernel_helper.
* nios2-tdep.c (nios2_get_next_pc): Skip over kernel helpers.
* nios2-linux-tdep.c (nios2_linux_is_kernel_helper): New.
(nios2_linux_init_abi): Install it.
gdb/testsuite/ChangeLog
2019-03-28 Sandra Loosemore <sandra@codesourcery.com>
* gdb.threads/watchpoint-fork.exp (test): Use large timeout
factor when no hardware watchpoint support.
When testing using native-gdbserver and native-extended-gdbserver, the sysroot
is not set. This results in a warning from GDB and files are sent via the
remote protocol, which can be slow.
On Ubuntu 18.04 (unlike most distros) the debug versions of the standard
libraries are included by default in /usr/lib/debug/.
These file reads are causing a complete native-gdbserver run on the AArch64
buildbot slave to timeout after 2.5 hours. This is also causing the builds
to back up on the slave.
The solution is to ensure the sysroot is set to / for all local boards.
This drastically reduces the time of a test. For example, gdb.base/sigall.exp
drops from 23 seconds to 4 seconds.
A full native-gdbserver run on the AArch64 slave now takes 8 minutes.
gdb/testsuite/ChangeLog:
* boards/local-board.exp: set sysroot to /.
When SVE is enabled, the V registers become pseudo registers based
on the Z registers. They should look the same as they do when
there is no SVE.
The existing code viewed them as single value registers. Switch
this to a vector.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_vnv_type): Use vector types.
SVE can view Z registers as 128bit values using .q prefix.
Add this view to the SVE feature.
gdb/ChangeLog:
* features/aarch64-sve.c (create_feature_aarch64_sve): Add q view.
When using older compilers, AT_HWCAP2 may not be be defined.
It is defined in elf/common.h, however including this in
gdbserver/linux-low.c causes conflicts.
Manually add the define if it does not exist.
gdb/gdbserver/ChangeLog:
* linux-low.c (AT_HWCAP2): Add define if not already included.
Valgrind detects the following error in a bunch of tests,
e.g. in gdb.base/foll-fork.exp.
==15155== VALGRIND_GDB_ERROR_BEGIN
==15155== Invalid read of size 8
==15155== at 0x55BE04: minimal_symbol_upper_bound(bound_minimal_symbol) (minsyms.c:1504)
==15155== by 0x3B2E9C: find_pc_partial_function(unsigned long, char const**, unsigned long*, unsigned long*, block const**) (blockframe.c:340)
==15155== by 0x3B3135: find_function_entry_range_from_pc(unsigned long, char const**, unsigned long*, unsigned long*) (blockframe.c:385)
==15155== by 0x4F5597: fill_in_stop_func(gdbarch*, execution_control_state*) [clone .part.16] (infrun.c:4124)
==15155== by 0x4FBE01: fill_in_stop_func (infrun.c:7636)
==15155== by 0x4FBE01: process_event_stop_test(execution_control_state*) (infrun.c:6279)
...
==15155== Address 0x715bec8 is 0 bytes after a block of size 2,952 alloc'd
==15155== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836)
==15155== by 0x405F2C: xrealloc (common-utils.c:62)
==15155== by 0x55BA4E: xresizevec<minimal_symbol> (poison.h:170)
==15155== by 0x55BA4E: minimal_symbol_reader::install() (minsyms.c:1399)
==15155== by 0x4981C7: elf_read_minimal_symbols (elfread.c:1165)
...
This seems to be a regression created by:
commit 042d75e42c
Author: Tom Tromey <tom@tromey.com>
AuthorDate: Sat Mar 2 12:29:48 2019 -0700
Commit: Tom Tromey <tom@tromey.com>
CommitDate: Fri Mar 15 16:02:10 2019 -0600
Allocate minimal symbols with malloc
Before this commit, the array of 'struct minimal_symbol'
contained a last element that was a "null symbol". The comment in
minimal_symbol_reader::install was:
/* We also terminate the minimal symbol table with a "null symbol",
which is *not* included in the size of the table. This makes it
easier to find the end of the table when we are handed a pointer
to some symbol in the middle of it. Zero out the fields in the
"null symbol" allocated at the end of the array. Note that the
symbol count does *not* include this null symbol, which is why it
is indexed by mcount and not mcount-1. */
memset (&msymbols[mcount], 0, sizeof (struct minimal_symbol));
However, minimal_symbol_upper_bound was still based on the assumption
that the array of minsym is terminated by a minsym with a null symbol:
it is looping with:
for (i = 1; MSYMBOL_LINKAGE_NAME (msymbol + i) != NULL; i++)
Replace this NULL comparison by a logic that calculates how
many msymbol are following the msymbols from which we are starting from.
(Re-)tested on debian/amd64, natively and under valgrind.
gdb/ChangeLog
2019-03-24 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Tom Tromey <tromey@adacore.com>
* minsyms.c (minimal_symbol_upper_bound): Fix buffer overflow.
Looking at the AArch64 buildbot, I noticed about two dozen old instances of
interrupt-daemon-attach taking up a full 100% cpu each.
If the test fails then the test binary relies on an alarm to ensure it dies
after 60 seconds.
As per the Linux man page for alarm:
Alarms created by alarm() ... are not inherited by children created via fork.
Update the test to add an alarm in the child and also put a sleep in the
child loop so it does not constantly consume cpu.
Note I haven't managed to re-create why the test failed. This fix will just
stop it hanging and consuming cpu when it does.
gdb/testsuite/ChangeLog:
* gdb.base/interrupt-daemon-attach.c (main): Add alarm and sleep
in child.
I noticed that trying to print the contents of a struct main_type
would fail when the type was a TYPE_CODE_RANGE:
(gdb) p *type.main_type
$1 = Python Exception <class 'gdb.error'> There is no member named low_undefined.:
And indeed, Python is right, fields "low_undefined" has been removed
from struct range_bounds back in ... 2014! It was done when we introduced
dynamic bounds handling. This patch fixes gdb-gdb.py.in according to
the new structure.
gdb/ChangeLog:
* gdb-gdb.py.in (StructMainTypePrettyPrinter.bound_img): New method.
(StructMainTypePrettyPrinter.bounds_img): Use new "bound_img"
method to compute the bounds of range types. Also print "[evaluated]"
if the bounds' values come from a dynamic evaluation.
The documentation say that the display_hint method must return a
string to serve as a display hint, and then goes on to list some
acceptable strings.
However, if we don't supply the display_hint method then we get a
default display style behaviour and there's currently no way (in the
python api) to force this default behaviour.
The guile api allows #f to be used in order to force the default
display style behaviour, and this is documented.
Currently, using None in the python api also forces the default
display behaviour.
This commit extends the documentation to make returning None from the
display_hint method an official mechanism by which the user can get
the default display style.
I've extended one of the existing tests to cover this case.
gdb/doc/ChangeLog:
* python.texi (Pretty Printing API): Document use of None for the
display_hint.
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.c (struct container) <is_map_p>: New
field.
(make_container): Initialise new field.
* gdb.python/py-prettyprint.exp: Add new tests.
* gdb.python/py-prettyprint.py (class ContainerPrinter)
<display_hint>: New method.
This makes the test names unique in gdb.python/py-prettyprint.exp, it
also switches to use gdb_breakpoint and gdb_continue_to_breakpoint
more so that we avoid test names with the source line number in - this
is bad if the test source ever changes as the test names will then
change.
One final change is to switch from using gdb_py_test_silent_cmd to use
gdb_test_no_output, the former should be used for running python
commands and can catch any thrown exception. However, in this case
the command being run is not a python command, its just a normal GDB
CLI command that produces no output, so lets use the appropriate
wrapper function.
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.exp: Use gdb_breakpoint and
gdb_continue_to_breakpoint more throughout this test.
(run_lang_tests) Supply unique test names, and use
gdb_test_no_output.
While writing a new test for 'set print pretty on' I spotted that GDB
will sometimes add a trailing whitespace character when pretty
printing. This commit removes the trailing whitespace and updates the
expected results in one tests where this was an issue.
I've added an extra test for 'set print pretty on' as it doesn't seem
to have much testing.
gdb/ChangeLog:
* cp-valprint.c (cp_print_value_fields): Don't print trailing
whitespace when pretty printing is on.
gdb/testsuite/ChangeLog:
* gdb.base/finish-pretty.exp: Update expected results.
* gdb.base/pretty-print.c: New file.
* gdb.base/pretty-print.exp: New file.
Commit ab42892fb7 ("Fix vertical scrolling of TUI source window")
introduced a use-after-free in source_cache::get_source_lines.
At the beginning of the method, we get the fullname of the symtab:
const char *fullname = symtab_to_fullname (s);
fullname points to the string owned by the symtab (s.fullname). When we
later do
scoped_fd desc = open_source_file (s);
s.fullname gets reallocated (even though the string contents may not
change). The fullname local variable now points to freed memory.
To avoid it, refresh the value of fullname after calling
open_source_file.
Here is the ASan report:
$ ./gdb -nx --data-directory=data-directory ./a.out
(gdb) start
Temporary breakpoint 1 at 0x1130: file test.cpp, line 12.
Starting program: /home/simark/build/binutils-gdb/gdb/a.out
Temporary breakpoint 1, main () at test.cpp:12
=================================================================
==26068==ERROR: AddressSanitizer: heap-use-after-free on address 0x6210003d4100 at pc 0x7fed89a34681 bp 0x7ffd8d185d80 sp 0x7ffd8d185528
READ of size 2 at 0x6210003d4100 thread T0
#0 0x7fed89a34680 in __interceptor_strlen /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:301
#1 0x55b6edf6c2f7 in std::char_traits<char>::length(char const*) /usr/include/c++/8.2.1/bits/char_traits.h:320
#2 0x55b6edf6c9b2 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string(char const*, std::allocator<char> const&) /usr/include/c++/8.2.1/bits/basic_string.h:516
#3 0x55b6ef09121b in source_cache::get_source_lines(symtab*, int, int, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*) /home/simark/src/binutils-gdb/gdb/source-cache.c:214
#4 0x55b6ef0a15cb in print_source_lines_base /home/simark/src/binutils-gdb/gdb/source.c:1340
#5 0x55b6ef0a2045 in print_source_lines(symtab*, int, int, enum_flags<print_source_lines_flag>) /home/simark/src/binutils-gdb/gdb/source.c:1415
#6 0x55b6ef112c87 in print_frame_info(frame_info*, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:914
#7 0x55b6ef10e90d in print_stack_frame(frame_info*, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:180
#8 0x55b6ee9592f8 in print_stop_location /home/simark/src/binutils-gdb/gdb/infrun.c:7853
#9 0x55b6ee95948f in print_stop_event(ui_out*) /home/simark/src/binutils-gdb/gdb/infrun.c:7870
#10 0x55b6ef34b962 in tui_on_normal_stop /home/simark/src/binutils-gdb/gdb/tui/tui-interp.c:98
#11 0x55b6ee01a14d in std::_Function_handler<void (bpstats*, int), void (*)(bpstats*, int)>::_M_invoke(std::_Any_data const&, bpstats*&&, int&&) /usr/include/c++/8.2.1/bits/std_function.h:297
#12 0x55b6ee965415 in std::function<void (bpstats*, int)>::operator()(bpstats*, int) const /usr/include/c++/8.2.1/bits/std_function.h:687
#13 0x55b6ee962f1b in gdb::observers::observable<bpstats*, int>::notify(bpstats*, int) const /home/simark/src/binutils-gdb/gdb/common/observable.h:106
#14 0x55b6ee95a6e7 in normal_stop() /home/simark/src/binutils-gdb/gdb/infrun.c:8142
#15 0x55b6ee93f236 in fetch_inferior_event(void*) /home/simark/src/binutils-gdb/gdb/infrun.c:3782
#16 0x55b6ee8f2641 in inferior_event_handler(inferior_event_type, void*) /home/simark/src/binutils-gdb/gdb/inf-loop.c:43
#17 0x55b6eea2a1f0 in handle_target_event /home/simark/src/binutils-gdb/gdb/linux-nat.c:4358
#18 0x55b6ee7045f1 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#19 0x55b6ee704e89 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#20 0x55b6ee7027b5 in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:322
#21 0x55b6ee702907 in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#22 0x55b6eeadfc16 in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:331
#23 0x55b6eeae2ef9 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1174
#24 0x55b6eeae30c2 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1190
#25 0x55b6edf4fa89 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#26 0x7fed88ad8222 in __libc_start_main (/usr/lib/libc.so.6+0x24222)
#27 0x55b6edf4f86d in _start (/home/simark/build/binutils-gdb/gdb/gdb+0x197186d)
0x6210003d4100 is located 0 bytes inside of 4096-byte region [0x6210003d4100,0x6210003d5100)
freed by thread T0 here:
#0 0x7fed89a8ac19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:66
#1 0x55b6edfe12df in xfree<char> /home/simark/src/binutils-gdb/gdb/common/common-utils.h:60
#2 0x55b6edfea675 in gdb::xfree_deleter<char>::operator()(char*) const /home/simark/src/binutils-gdb/gdb/common/gdb_unique_ptr.h:34
#3 0x55b6edfe532c in std::unique_ptr<char, gdb::xfree_deleter<char> >::reset(char*) /usr/include/c++/8.2.1/bits/unique_ptr.h:382
#4 0x55b6edfe7329 in std::unique_ptr<char, gdb::xfree_deleter<char> >::operator=(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /usr/include/c++/8.2.1/bits/unique_ptr.h:289
#5 0x55b6ef09ec2b in find_and_open_source(char const*, char const*, std::unique_ptr<char, gdb::xfree_deleter<char> >*) /home/simark/src/binutils-gdb/gdb/source.c:990
#6 0x55b6ef09f56a in open_source_file(symtab*) /home/simark/src/binutils-gdb/gdb/source.c:1069
#7 0x55b6ef090f78 in source_cache::get_source_lines(symtab*, int, int, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*) /home/simark/src/binutils-gdb/gdb/source-cache.c:205
#8 0x55b6ef0a15cb in print_source_lines_base /home/simark/src/binutils-gdb/gdb/source.c:1340
#9 0x55b6ef0a2045 in print_source_lines(symtab*, int, int, enum_flags<print_source_lines_flag>) /home/simark/src/binutils-gdb/gdb/source.c:1415
#10 0x55b6ef112c87 in print_frame_info(frame_info*, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:914
#11 0x55b6ef10e90d in print_stack_frame(frame_info*, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:180
#12 0x55b6ee9592f8 in print_stop_location /home/simark/src/binutils-gdb/gdb/infrun.c:7853
#13 0x55b6ee95948f in print_stop_event(ui_out*) /home/simark/src/binutils-gdb/gdb/infrun.c:7870
#14 0x55b6ef34b962 in tui_on_normal_stop /home/simark/src/binutils-gdb/gdb/tui/tui-interp.c:98
#15 0x55b6ee01a14d in std::_Function_handler<void (bpstats*, int), void (*)(bpstats*, int)>::_M_invoke(std::_Any_data const&, bpstats*&&, int&&) /usr/include/c++/8.2.1/bits/std_function.h:297
#16 0x55b6ee965415 in std::function<void (bpstats*, int)>::operator()(bpstats*, int) const /usr/include/c++/8.2.1/bits/std_function.h:687
#17 0x55b6ee962f1b in gdb::observers::observable<bpstats*, int>::notify(bpstats*, int) const /home/simark/src/binutils-gdb/gdb/common/observable.h:106
#18 0x55b6ee95a6e7 in normal_stop() /home/simark/src/binutils-gdb/gdb/infrun.c:8142
#19 0x55b6ee93f236 in fetch_inferior_event(void*) /home/simark/src/binutils-gdb/gdb/infrun.c:3782
#20 0x55b6ee8f2641 in inferior_event_handler(inferior_event_type, void*) /home/simark/src/binutils-gdb/gdb/inf-loop.c:43
#21 0x55b6eea2a1f0 in handle_target_event /home/simark/src/binutils-gdb/gdb/linux-nat.c:4358
#22 0x55b6ee7045f1 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#23 0x55b6ee704e89 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#24 0x55b6ee7027b5 in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:322
#25 0x55b6ee702907 in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#26 0x55b6eeadfc16 in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:331
#27 0x55b6eeae2ef9 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1174
#28 0x55b6eeae30c2 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1190
#29 0x55b6edf4fa89 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
previously allocated by thread T0 here:
#0 0x7fed89a8b019 in __interceptor_malloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:86
#1 0x7fed88af983f in realpath@@GLIBC_2.3 (/usr/lib/libc.so.6+0x4583f)
#2 0x7fed899dbbbc in __interceptor_canonicalize_file_name /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:3297
#3 0x55b6ee376a03 in gdb_realpath(char const*) /home/simark/src/binutils-gdb/gdb/common/pathstuff.c:72
#4 0x55b6ef09ec12 in find_and_open_source(char const*, char const*, std::unique_ptr<char, gdb::xfree_deleter<char> >*) /home/simark/src/binutils-gdb/gdb/source.c:990
#5 0x55b6ef09f56a in open_source_file(symtab*) /home/simark/src/binutils-gdb/gdb/source.c:1069
#6 0x55b6ef0a0f12 in print_source_lines_base /home/simark/src/binutils-gdb/gdb/source.c:1270
#7 0x55b6ef0a2045 in print_source_lines(symtab*, int, int, enum_flags<print_source_lines_flag>) /home/simark/src/binutils-gdb/gdb/source.c:1415
#8 0x55b6ef112c87 in print_frame_info(frame_info*, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:914
#9 0x55b6ef10e90d in print_stack_frame(frame_info*, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:180
#10 0x55b6ee9592f8 in print_stop_location /home/simark/src/binutils-gdb/gdb/infrun.c:7853
#11 0x55b6ee95948f in print_stop_event(ui_out*) /home/simark/src/binutils-gdb/gdb/infrun.c:7870
#12 0x55b6ef34b962 in tui_on_normal_stop /home/simark/src/binutils-gdb/gdb/tui/tui-interp.c:98
#13 0x55b6ee01a14d in std::_Function_handler<void (bpstats*, int), void (*)(bpstats*, int)>::_M_invoke(std::_Any_data const&, bpstats*&&, int&&) /usr/include/c++/8.2.1/bits/std_function.h:297
#14 0x55b6ee965415 in std::function<void (bpstats*, int)>::operator()(bpstats*, int) const /usr/include/c++/8.2.1/bits/std_function.h:687
#15 0x55b6ee962f1b in gdb::observers::observable<bpstats*, int>::notify(bpstats*, int) const /home/simark/src/binutils-gdb/gdb/common/observable.h:106
#16 0x55b6ee95a6e7 in normal_stop() /home/simark/src/binutils-gdb/gdb/infrun.c:8142
#17 0x55b6ee93f236 in fetch_inferior_event(void*) /home/simark/src/binutils-gdb/gdb/infrun.c:3782
#18 0x55b6ee8f2641 in inferior_event_handler(inferior_event_type, void*) /home/simark/src/binutils-gdb/gdb/inf-loop.c:43
#19 0x55b6eea2a1f0 in handle_target_event /home/simark/src/binutils-gdb/gdb/linux-nat.c:4358
#20 0x55b6ee7045f1 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#21 0x55b6ee704e89 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#22 0x55b6ee7027b5 in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:322
#23 0x55b6ee702907 in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#24 0x55b6eeadfc16 in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:331
#25 0x55b6eeae2ef9 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1174
#26 0x55b6eeae30c2 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1190
#27 0x55b6edf4fa89 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#28 0x7fed88ad8222 in __libc_start_main (/usr/lib/libc.so.6+0x24222)
gdb/ChangeLog:
* source-cache.c (source_cache::get_source_lines): Re-read
fullname after calling open_source_file.
Philippe pointed out that some comments in minsyms.c still referred to
obstack allocation. This patch fixes these up.
In most cases here, my view is that the comments were more misleading
than helpful. So, I've generally removed text.
gdb/ChangeLog
2019-03-25 Tom Tromey <tromey@adacore.com>
* minsyms.c (BUNCH_SIZE): Update comment.
(~minimal_symbol_reader): Remove old comment.
(compact_minimal_symbols): Update comment.
(minimal_symbol_reader::install): Remove old comment. Update
other comments.
This commit fixes a regression in the testsuite itself, triggered by
errors being raised from within gdb_test_multiple, originally reported
by Pedro Franco de Carvalho's at
<https://sourceware.org/ml/gdb-patches/2019-03/msg00160.html>. Parts
of the commit message are based on his report.
This started happening due to a commit that was introduced recently,
and it can cause the testsuite to hang.
The commit that triggers this is:
fe1a5cad30
[gdb/testsuite] Log wait status on process no longer exists error
That commit introduces a new "eof" block in gdb_test_multiple. That
is not incorrect itself, but dejagnu's remote_expect is picking that
block as the "default" action when an error is raised from within the
commands inside a call to gdb_test_multiple:
# remote_expect works basically the same as standard expect, but it
# also takes care of getting the file descriptor from the specified
# host and also calling the timeout/eof/default section if there is an
# error on the expect call.
#
proc remote_expect { board timeout args } {
I find that "feature" surprising, and I don't really know why it
exists, but this means that the eof section that remote_expect picks
as the error block can be executed even when there was no actual eof
and the GDB process is still running, so the wait introduced in the
commit that tries to get the exit status of GDB hangs forever, while
GDB itself waits for input.
This only happens when there are internal testsuite errors (not
testcase failures). This can be reproduced easily with a testcase
such as:
gdb_start
gdb_test_multiple "show version" "show version" {
-re ".*" {
error "forced error"
}
}
I think that working around this in GDB is useful so that the
testsuite doesn't hang in these cases.
Adding an empty "default" block at the end of the expect body in
gdb_test_multiple doesn't work, because dejagnu gives preference to
"eof" blocks:
if { $x eq "eof" } {
set save_next 1
} elseif { $x eq "default" || $x eq "timeout" } {
if { $error_sect eq "" } {
set save_next 1
}
}
And we do have "eof" blocks. So we need to make sure that the last
"eof" block is safe to use as the default error block. It's also
pedantically incorrect to print
"ERROR: Process no longer exists"
which is what we'd get if the last eof block we have was selected
(more below on this).
So this commit solves this by appending an "eof" with an empty
spawn_id list, so that it won't ever match.
Now, why is the first "eof" block selected today as the error block,
instead of the last one?
The reason is that remote_expect, while parsing the body to select the
default block to execute after an error, is affected by the comments
in the body (since they are also parsed).
If this comment in gdb_test_multiple
# patterns below apply to any spawn id specified.
is changed to
# The patterns below apply to any spawn id specified.
then the second eof block is selected and there is no hang.
Any comment at that same place with an even number of tokens also
works.
This is IMO a coincidence caused by how comments work in TCL.
Comments should only appear in places where a command can appear. And
here, remote_expect is parsing a list of options, not commands, so
it's not unreasonable to not parse comments, similarly to how this:
set a_list {
an_element
# another_element
}
results in a list with three elements, not one element.
The fact that comments with an even number of tokens work is just a
coincidence of how remote_expect's little state machine is
implemented.
I thought we could solve this by stripping out comment lines in
gdb_expect, but I didn't find an easy way to do that. Particularly, a
couple naive approaches I tried run into complications. For example,
we have gdb_test calls with regular expressions that include sequences
like "\r\n#", and by the time we get to gdb_expect, the \r\n have
already been expanded to a real newline, so just splitting the whole
body at newline boundaries, looking for lines that start with #
results in incorrectly stripping out half of the gdb_text regexp. I
think it's better (at least in this commit), to move the comments out
of the list, because it's much simpler and risk free.
gdb/testsuite/ChangeLog:
2019-03-25 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple): Split appends to $code and
move comments outside list. Append '-i "" eof' section.
expression.h includes symtab.h, but apparently only for the
declaration of struct block. This patch changes it to foward-declare
the structure, and remove the include.
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* expression.h: Don't include symtab.h.
(struct block): Forward declare.
I noticed that there are still many places referring to non-const
blocks. This constifies all the remaining ones that I found that
could be constified.
In a few spots, this search found unused variables or fields. I
removed these. I've also removed some unnecessary casts to
"struct block *".
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* c-exp.y (typebase): Remove casts.
* gdbtypes.c (lookup_unsigned_typename, )
(lookup_signed_typename): Remove cast.
* eval.c (parse_to_comma_and_eval): Remove cast.
* parse.c (write_dollar_variable): Remove cast.
* block.h (struct block) <superblock>: Now const.
* symfile-debug.c (debug_qf_map_matching_symbols): Update.
* psymtab.c (psym_map_matching_symbols): Make "block" const.
(map_block): Make "block" const.
* symfile.h (struct quick_symbol_functions)
<map_matching_symbols>: Constify block argument to "callback".
* symtab.c (basic_lookup_transparent_type_quick): Make "block"
const.
(find_pc_sect_compunit_symtab): Make "b" const.
(find_symbol_at_address): Likewise.
(search_symbols): Likewise.
* dwarf2read.c (dw2_lookup_symbol): Make "block" const.
(dw2_debug_names_lookup_symbol): Likewise.
(dw2_map_matching_symbols): Update.
* p-valprint.c (pascal_val_print): Remove "block".
* ada-lang.c (ada_add_global_exceptions): Make "b" const.
(aux_add_nonlocal_symbols): Make "block" const.
(resolve_subexp): Remove cast.
* linespec.c (iterate_over_all_matching_symtabs): Make "block"
const.
(iterate_over_file_blocks): Likewise.
* f-exp.y (%union) <bval>: Remove.
* coffread.c (patch_opaque_types): Make "b" const.
* spu-tdep.c (spu_catch_start): Make "block" const.
* c-valprint.c (print_unpacked_pointer): Remove "block".
* symmisc.c (dump_symtab_1): Make "b" const.
(block_depth): Make "block" const.
* d-exp.y (%union) <bval>: Remove.
* cp-support.h (cp_lookup_rtti_type): Update.
* cp-support.c (cp_lookup_rtti_type): Make "block" const.
* psymtab.c (psym_lookup_symbol): Make "block" const.
(maintenance_check_psymtabs): Make "b" const.
* python/py-framefilter.c (extract_sym): Make "sym_block" const.
(enumerate_locals, enumerate_args): Update.
* python/py-symtab.c (stpy_global_block): Make "block" const.
(stpy_static_block): Likewise.
* inline-frame.c (block_starting_point_at): Make "new_block"
const.
* block.c (find_block_in_blockvector): Make return type const.
(blockvector_for_pc_sect): Make "b" const.
(find_block_in_blockvector): Make "b" const.
Commit 799efbe8e0 was supposed to fix
the below leak. However, for this fix to work, it is critical to
save the ptid before detach.
This commit (pushed as OBVIOUS, as the change was already reviewed/approved)
saves the ptid before the detach, as in the original reviewed patch
(see https://sourceware.org/ml/gdb-patches/2019-02/msg00263.html).
Re-tested on debian/amd64, natively and under valgrind.
==7426== 1,123 (72 direct, 1,051 indirect) bytes in 1 blocks are definitely lost in loss record 2,872 of 3,020
==7426== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==7426== by 0x5BD1E1: get_thread_arch_aspace_regcache(ptid_t, gdbarch*, address_space*) (regcache.c:330)
==7426== by 0x5BD39A: get_thread_regcache (regcache.c:366)
==7426== by 0x5BD39A: get_current_regcache() (regcache.c:372)
==7426== by 0x4B1EB4: get_current_frame() (frame.c:1588)
...
I ran across a comment in symfile.c today:
/* Clear globals which might have pointed into a removed objfile.
FIXME: It's not clear which of these are supposed to persist
between expressions and which ought to be reset each time. */
It seems to me that this can be clarified: the parser entry points
ought to reset the innermost block tracker (and the expression context
block), and these should not be considered valid for code to use at
arbitrary times -- only immediately after an expression has been
parsed.
This patch implements this idea. This could be further improved by
removing the parser globals and changing the parser functions to
return this information, but I have not done this.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_create): Update.
* symfile.c (clear_symtab_users): Don't reset innermost_block.
* printcmd.c (display_command, do_one_display): Don't reset
innermost_block.
* parser-defs.h (enum innermost_block_tracker_type): Move to
expression.h.
(innermost_block): Update comment.
* parse.c (parse_exp_1): Add tracker_types parameter.
(parse_exp_in_context): Rename from parse_exp_in_context_1. Add
tracker_types parameter. Reset innermost_block.
(parse_exp_in_context): Remove.
(parse_expression_for_completion): Update.
* objfiles.c (~objfile): Don't reset expression_context_block or
innermost_block.
* expression.h (enum innermost_block_tracker_type): Move from
parser-defs.h.
(parse_exp_1): Add tracker_types parameter.
* breakpoint.c (set_breakpoint_condition, watch_command_1): Don't
reset innermost_block.
objfiles.h needs "struct bcache" to be complete, so it should include
bcache.h. This patch implements this.
Tested by rebuilding.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* objfiles.h: Include bcache.h.
I found a couple of spots that manually saved and restored the current
language. This patch changes them to use
scoped_restore_current_language.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* linespec.c (get_current_search_block): Use
scoped_restore_current_language.
* symmisc.c (dump_symtab): Use scoped_restore_current_language.
Pauth address signing is enabled at binary compile time. When enabled the
return addresses for functions may be mangled. This patch adds functionality
to restore the original address for use in the prologue scan unwinder.
In the prologue analyzer, check for PACIASP/PACIBSP (enable address mangling)
and AUTIASP/AUTIBSP (disable address mangling).
When unwinding the PC from the prologue, unmask the register if required.
Add a test case to the prologue tests.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_analyze_prologue): Check for pauth
instructions.
(aarch64_analyze_prologue_test): Add PACIASP test.
(aarch64_prologue_prev_register): Unmask PC value.
Pauth address signing is enabled at binary compile time. When enabled the
return addresses for functions may be mangled. This patch adds functionality
to restore the original address for use in the DWARF unwinder.
DW_CFA_AARCH64_negate_ra_state in a binary indicates the toggling of address
signing between enabled and disabled. Ensure the state is stored in the DWARF
register ra_state.
Ensure the pauth DWARF registers are initialised.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_frame_unmask_address): New function.
(aarch64_dwarf2_prev_register): Unmask PC value.
(aarch64_dwarf2_frame_init_reg): Init pauth registers.
(aarch64_execute_dwarf_cfa_vendor_op): Check for
DW_CFA_AARCH64_negate_ra_state.
(aarch64_gdbarch_init): Add aarch64_execute_dwarf_cfa_vendor_op.
Map the pauth registers to DWARF.
Add a new pseudo register ra_state and also map this to DWARF. This register
is hidden from the user - prevent it from being read or written to. It will
be used for the unmangling of addresses.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_dwarf_reg_to_regnum): Check for pauth
registers.
(aarch64_pseudo_register_name): Likewise.
(aarch64_pseudo_register_type): Likewise.
(aarch64_pseudo_register_reggroup_p): Likewise.
(aarch64_gdbarch_init): Add pauth registers.
* aarch64-tdep.h (AARCH64_DWARF_PAUTH_RA_STATE): New define.
(AARCH64_DWARF_PAUTH_DMASK): Likewise.
(AARCH64_DWARF_PAUTH_CMASK): Likewise.
(struct gdbarch_tdep): Add regnum for ra_state.
Add the pauth registers to the regset lists.
Add a new regset type OPTIONAL_REGS which allows for the regset read to fail.
Once the read fails, it will not be checked again. This allows targets with
optional features to keep a single static regset_info structure.
gdb/ChangeLog:
* arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_store_pauthregset): New function.
* linux-low.c (regsets_store_inferior_registers): Allow optional reads
to fail.
* linux-low.h (enum regset_type): Add OPTIONAL_REGS.
Initialise the pauth registers when creating a target description, and store
the regnum of the first pauth register.
Use ptrace to read the registers in the pauth feature.
Do not allow the registers to be written.
gdb/ChangeLog:
* aarch64-linux-nat.c (fetch_pauth_masks_from_thread): New
function.
(aarch64_linux_nat_target::fetch_registers): Read pauth registers.
* aarch64-tdep.c (aarch64_cannot_store_register): New function.
(aarch64_gdbarch_init): Add puth registers.
* aarch64-tdep.h (struct gdbarch_tdep): Add pauth features.
* arch/aarch64.h (AARCH64_PAUTH_DMASK_REGNUM): New define.
(AARCH64_PAUTH_CMASK_REGNUM): Likewise.
Add aarch64_get_hwcap functions for reading the HWCAP.
From this extract the PACA value and use this to enable pauth.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Read PACA hwcap.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
(aarch64_linux_get_hwcap): New function.
* aarch64-linux-tdep.h (AARCH64_HWCAP_PACA): New define.
(aarch64_linux_get_hwcap): New declaration.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (AARCH64_HWCAP_PACA): New define.
(aarch64_get_hwcap): New function.
(aarch64_arch_setup): Read APIA hwcap.
Pointer Authentication is a new feature in AArch64 v8.3-a. When enabled in
the compiler, function return addresses will be mangled by the kernel.
Add register description xml and wire up to aarch64_linux_read_description.
This description includes the two pauth user registers.
Nothing yet uses the feature - that is added in later patches.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Add pauth param.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
* aarch64-tdep.c (struct target_desc): Add in pauth.
(aarch64_read_description): Add pauth param.
(aarch64_gdbarch_init): Likewise.
* aarch64-tdep.h (aarch64_read_description): Likewise.
* arch/aarch64.c (aarch64_create_target_description): Likewise.
* arch/aarch64.h (aarch64_create_target_description): Likewise.
* features/Makefile: Add new files.
* features/aarch64-pauth.c: New file.
* features/aarch64-pauth.xml: New file.
gdb/doc/ChangeLog:
* gdb.texinfo: Describe pauth feature.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c (get_ipa_tdesc): Add pauth param.
(initialize_low_tracepoint): Likewise.
* linux-aarch64-low.c (aarch64_arch_setup): Likewise.
* linux-aarch64-tdesc-selftest.c (aarch64_tdesc_test): Likewise.
* linux-aarch64-tdesc.c (struct target_desc): Likewise.
(aarch64_linux_read_description): Likewise.
* linux-aarch64-tdesc.h (aarch64_linux_read_description): Likewise.
Recent versions of Ubuntu and Debian default GCC to enable pie.
In dump.exp, pie will causes addresses to be out of range for IHEX.
In break-interp.exp, pie is explicitly set for some tests and assumed
to be disabled for the remainder.
Ensure pie is disabled for these tests when required.
In addition, add a pie option to gdb_compile to match the nopie option
and simplify use.
gdb/testsuite/ChangeLog:
* README: Add pie options.
* gdb.base/break-interp.exp: Ensure pie is disabled.
* gdb.base/dump.exp: Likewise.
* lib/gdb.exp (gdb_compile): Add pie option.
While referencing the manual, I noticed that gdb.pretty_printers
wasn't documented using @defvar. This made it more difficult to find
in the info pages. This patch adds the @defvar and also an
introductory paragraph in that node.
gdb/doc/ChangeLog
2019-03-20 Tom Tromey <tromey@adacore.com>
* python.texi (Selecting Pretty-Printers): Use @defvar for
gdb.pretty_printers.
I noticed that handle_inferior_event is just a small wrapper that
frees the value chain. This patch replaces it with a
scoped_value_mark, reducing the number of lines of code here.
Regression tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-20 Tom Tromey <tromey@adacore.com>
* infrun.c (handle_inferior_event): Rename from
handle_inferior_event_1. Create a scoped_value_mark.
(handle_inferior_event): Remove.
If you run "gdb -i=mi2" and set a "display", then when "next"ing the
displays will be shown twice:
~"1: x = 23\n"
~"7\t printf(\"%d\\n\", x);\n"
~"1: x = 23\n"
*stopped,reason="end-stepping-range",frame={addr="0x0000000000400565",func="main",args=[],file="q.c",fullname="/tmp/q.c",line="7"},thread-id="1",stopped-threads="all",core="1"
The immediate cause of this is this code in mi_on_normal_stop_1:
print_stop_event (mi_uiout);
console_interp = interp_lookup (current_ui, INTERP_CONSOLE);
if (should_print_stop_to_console (console_interp, tp))
print_stop_event (mi->cli_uiout);
... which obviously prints the stop twice.
However, I think the first call to print_stop_event is intended just
to emit the MI *stopped notification, which explains why the source
line does not show up two times.
This patch fixes the bug by changing print_stop_event to only call
do_displays for non-MI-like ui-outs.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-19 Tom Tromey <tromey@adacore.com>
* mi/mi-interp.c (mi_on_normal_stop_1): Only show displays once.
* infrun.h (print_stop_event): Add "displays" parameter.
* infrun.c (print_stop_event): Add "displays" parameter.
gdb/testsuite/ChangeLog
2019-03-19 Tom Tromey <tromey@adacore.com>
* gdb.mi/mi2-cli-display.c: New file.
* gdb.mi/mi2-cli-display.exp: New file.
This commit add comments describing tui_ui_out and its fields, and
cleans up the code a little bit.
Also switch to using in-class initialization so that the initial
values can be seen alongside the comments.
I see no reason for initializing m_line as -1 instead of 0, since all
the checks in the .c file are of the form "> 0". AFAICS there's no
practical difference between -1 and 0. So it seems simpler to
initialize it as 0.
There's a bit of redundancy in tui_ui_out::do_field_string, which is
fixed by this commit.
gdb/ChangeLog:
2019-03-19 Pedro Alves <palves@redhat.com>
* tui/tui-out.c (tui_ui_out::do_field_string): Simplify.
(tui_ui_out::do_text): Add comments. Reset M_LINE to 0 instead of
to -1. Fix TABs vs spaces.
(tui_ui_out::tui_ui_out): Don't initialize fields here.
* tui/tui-out.h (tui_ui_out) Add intro comments.
<m_line, m_start_of_line>: In-class initialize, and add describing
comment.
The following commit broke the build for Arm:
d3a70e03cf
Change iterate_over_lwps to take a gdb::function_view
Correct the changes made to arm_linux_insert_hw_breakpoint1 and make
similar changes to arm_linux_remove_hw_breakpoint1.
2019-03-18 Alan Hayward <alan.hayward@arm.com>
* arm-linux-nat.c (arm_linux_insert_hw_breakpoint1): Fix
variable names.
(arm_linux_remove_hw_breakpoint1): Use a gdb::function_view.
The first time you type UP or DOWN arrow in the command window, GDB
should scroll the source window, but instead it displays the line
number and the file name in the command window(?).
What happens there is that the first time we call
tui_ui_out::do_field_int, it doesn't initialize m_line, because
m_start_of_line is -1, as set by the constructor; and then the
following call to tui_ui_out::do_field_string falls back to
cli_ui_out::do_field_string because m_line is zero.
The problem is caused by a typo in the C++ification of tui_ui_out,
commit 112e8700a6, where m_line and m_start_of_line's initial values
were swapped from what they used to be:
-struct ui_out *
-tui_out_new (struct ui_file *stream)
+tui_ui_out::tui_ui_out (ui_file *stream)
+: cli_ui_out (stream, 0),
+ m_line (0),
+ m_start_of_line (-1)
{
-
- /* Initialize our fields. */
- data->line = -1;
- data->start_of_line = 0;
This commit fixes it.
gdb/ChangeLog:
2019-03-18 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* tui/tui-out.c (tui_ui_out::tui_ui_out): Fix initialization of
m_line and m_start_of_line.
gdb/ChangeLog:
2019-03-18 Eli Zaretskii <eliz@gnu.org>
* tui/tui-io.c (gdb_wgetch): Don't echo CR.
(tui_getc): When gdb_wgetch returns a CR, behave the same as when
it returns a newline. This fixes a regression in TUI mode, whereby
the next line is output on the same screen line as the user input.
The earlier patch to change minimal symbol allocations to use xmalloc
erroneously left a call to obstack_blank in
minimal_symbol_reader::install. Because obstack_blank does not finish
the object allocation on an obstack, this in turn could cause invalid
memory reads in some situations.
This patch fixes the problem by removing the call. Tested on x86-64
Fedora 29; also verified with valgrind.
gdb/ChangeLog
2019-03-18 Tom Tromey <tromey@adacore.com>
* minsyms.c (minimal_symbol_reader::install): Remove call to
obstack_blank.
With styling enabled, I think the way we display the TUI's
highlighted/current line is very ugly and distracting. The problem in
my view is that we reverse foreground/background in colored text as
well, leading to rainbow of background colors.
This patch changes that to something that I find much more sensible --
only reverse the default foreground/background colors, leave styled
text colors alone. If the foreground color is not the default
(because the text was styled), leave the foreground color as is. If
e.g., the terminal is fg=BLACK, and bg=WHITE, and the style wants to
print text in RED, reverse the background color (print in BLACK), but
still print the text in RED.
Note: The new ui_file_style::set_fg method isn't called set_foreground
instead, because set_foreground is a macro in /usr/lib/term.h (ncurses).
gdb/ChangeLog:
2019-03-18 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (reverse_mode_p, reverse_save_bg, reverse_save_fg):
New globals.
(apply_style): New, factored out from ...
(apply_ansi_escape): ... this. Handle reverse video mode.
(tui_set_reverse_mode): New function.
* tui/tui-io.h (tui_set_reverse_mode): New declaration.
* tui/tui-winsource.c (tui_show_source_line): Use
tui_set_reverse_mode instead of setting A_STANDOUT.
* ui-style.h (struct ui_file_style) <set_reverse, set_fg, set_bg>:
New setter methods.
This commit fixes two issues in scrolling right in the TUI:
#1 - Scrolling right with the arrow keys, the first keypress doesn't
do anything. The problem is that copy_source_line() checks if
(column < first_col), and because of the ++column directly before, it
basically starts with 1 instead of 0.
#2 - Scrolling right handles TABS and escaped characters as single
characters, which just looks weird. The problem is that there's a
spot that misses handling TABS.
gdb/ChangeLog:
2019-03-18 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-source.c (copy_source_line): Fix handling of 'column'.
Handle tabs.
Using ptype on an array type in Ada can sometimes show an incorrect
high bound. This happens because ada_evaluate_subexp will create an
array with an incorrect upper bound in the EVAL_AVOID_SIDE_EFFECTS
case.
This patch fixes the problem by arranging to always create such an
array with valid bounds.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-18 Tom Tromey <tromey@adacore.com>
* ada-lang.c (empty_array): Add "high" parameter.
(ada_evaluate_subexp): Update.
gdb/testsuite/ChangeLog
2019-03-18 Joel Brobecker <brobecker@adacore.com>
Tom Tromey <tromey@adacore.com>
* gdb.ada/ptype_array/pck.adb: New file.
* gdb.ada/ptype_array/pck.ads: New file.
* gdb.ada/ptype_array/foo.adb: New file.
* gdb.ada/ptype_array.exp: New file.
The build failure was noticed by Helmut Jarausch in
https://bugs.gentoo.org/680232:
$ ./configure CXXFLAGS='-std=c++17 -Os'
...
CXXLD gdb
ld: init.o: in function `initialize_all_files()':
init.c:(.text+0x113): undefined reference to `_initialize_string_view_selftests()'
It happens because '_initialize_string_view_selftests()' is
conditionally defined based on C++ default.
The change defines '_initialize_string_view_selftests()'
unconditionally and leaves implementation a no-op on c++17
compilers.
gdb/ChangeLog:
2019-03-17 Sergei Trofimovich <siarheit@google.com>
* unittests/string_view-selftests.c: Define
_initialize_string_view_selftests unconditionally.
There is unused variable text_vma in function windows_make_so. This
leads to build error on Windows using Cygwin.
gdb/ChangeLog:
2019-03-17 Vladimir Martyanov <vilgeforce@gmail.com>
PR gdb/24350
* windows-nat.c (windows_make_so): Remove unused text_vma variable.
There are a wrong format strings in function display_selector() in
file windows-nat.c. This leads to build error using Cygwin on Windows.
LDT_ENTRY.HighWord is a DWORD, which is unsigned long int, so the
format specification should be for long int, not simply int.
gdb/ChangeLog:
2019-03-17 Vladimir Martyanov <vilgeforce@gmail.com>
PR gdb/24351
* windows-nat.c (display_selector): Format specifications fixed
Without this change, when the current line is longer than the source
window width, redisplaying that line overwrites the window frame and
also portions of the next line.
gdb/ChangeLog:
2019-03-17 Eli Zaretskii <eliz@gnu.org>
* tui/tui-winsource.c (tui_set_is_exec_point_at): Call
tui_refill_source_window instead of tui_refresh_win, to update the
current execution line. This fixes redisplay of the current line
when stepping through very long lines with "next" or "step".
gdb/ChangeLog:
2019-03-16 Eli Zaretskii <eliz@gnu.org>
* source-cache.c (source_cache::get_source_lines): Call
find_source_lines to initialize s->nlines. This fixes vertical
scrolling of TUI source window when the DOWN arrow is pressed.
gdb/ChangeLog:
2019-03-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-winsource.c (tui_show_source_line): Revert "Use
wclrtoeol in tui_show_source_line". This reverts changes made in
commit 4a3045920b.
This changes struct minimal_symbol to inherit from general_symbol_info
and updates various macros to cope.
Because MSYMBOL_SET_LANGUAGE and MSYMBOL_SET_NAMES were only used from
a single spot, this patch removes them in favor of simply inlining
their definitions. I consider this to be somewhat cleaner, not least
because the "phony polymorphism" provided by such macros is not useful
in practice.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* symtab.h (struct minimal_symbol): Derive from
general_symbol_info.
(MSYMBOL_VALUE, MSYMBOL_VALUE_RAW_ADDRESS)
(MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES)
(MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE)
(MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME)
(MSYMBOL_LINKAGE_NAME, MSYMBOL_DEMANGLED_NAME)
(MSYMBOL_SEARCH_NAME): Update.
(MSYMBOL_SET_LANGUAGE, MSYMBOL_SET_NAMES): Remove.
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Don't use memset.
* minsyms.c (minimal_symbol_reader::record_full): Update.
minimal_symbol_reader::install copies minsyms from the msym_bunch
objects into the allocated memory. It seemed better to me to do this
via memcpy, as that is frequently optimized in libc.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* minsyms.c (minimal_symbol_reader::install): Use memcpy.
Currently, minimal symbols are allocated on the per-BFD obstack.
However, it is also possible for multiple symbol readers to create
minimal symbols for a given objfile. In this case, the minimal
symbols will be reallocated on the obstack, leading to some waste of
storage.
This is a memory leak, but I think it won't be caught by tools like
valgrind, because valgrind doesn't know about obstacks.
This patch fixes the problem by using malloc to allocate the storage
for minimal symbols.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile_per_bfd_storage) <msymbols>: Now a
unique_xmalloc_ptr.
(objfile::msymbols_range::begin, objfile::msymbols_range::end):
Update.
* minsyms.c (lookup_minimal_symbol_by_pc_section)
(build_minimal_symbol_hash_tables)
(minimal_symbol_reader::install): Update.
This changes objfile_per_bfd_storage::demangled_names_hash to be an
htab_up. This lets us remove some manual management code from the
objfile_per_bfd_storage destructor.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* symtab.c (create_demangled_names_hash): Update.
(symbol_set_names): Update.
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_names_hash>: Now an htab_up.
* objfiles.c (objfile_per_bfd_storage): Simplify.
There's no reason that the objfile_per_bfd_storage must be allocated
via bfd_alloc. This patch changes objfile_per_bfd_storage to be
managed more simply, via ordinary new and delete; and moves some code
into its (new) destructor.
While doing this I also noticed an extra initialization of
language_of_main, and removed it.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile_per_bfd_storage): Declare
destructor.
* objfiles.c (objfile_per_bfd_storage::~objfile_per_bfd_storage):
New.
(get_objfile_bfd_data): Use new. Don't initialize
language_of_main.
(free_objfile_per_bfd_storage): Remove.
(objfile_bfd_data_free, objfile::~objfile): Use delete.
I was curious what used the terminating "null" minimal symbol; and
after looking I could not find anything. This patch removes
terminate_minimal_symbol_table and the extra minimal symbol that is
allocated for it.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Update.
* objfiles.c (objfile::objfile): Update.
* minsyms.h (terminate_minimal_symbol_table): Don't declare.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update
comment.
(minimal_symbol_reader::install): Update.
(terminate_minimal_symbol_table): Remove.
* jit.c (jit_object_close_impl): Update.
minimal_symbol_reader::record_full does not need to initialize any
minsym fields to 0, because that was already done implicitly via the
use of XCNEW when allocating the msym_bunch.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* minsyms.c (minimal_symbol_reader::record_full): Remove some
initializations.
I noticed that objfile_per_bfd_storage::demangled_hash_languages is a
std::vector, which seemed quite large for something that,
fundamentally, can be represented as a bitset. This patch
reimplements it as a std::bitset.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_hash_languages>: Now a bitset.
* minsyms.c (add_minsym_to_demangled_hash_table): Update.
(lookup_minimal_symbol): Update.
Only one caller of minimal_symbol_reader::record_with_info was using
the return value, so this patch simplifies this code by having it
return void and changing that caller to use record_full instead.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* minsyms.h (class minimal_symbol_reader) <record_with_info>:
Don't return the symbol.
* coffread.c (record_minimal_symbol): Use record_full.
Tom Tromey
Raul Tambre
Tom de Vries
Philippe Waroquiers
Tom Tromey
Dilyan Palauzov
Eli Zaretskii
Andrew Burgess
Ali Tamur
Joel Brobecker
Keith Seitz
Sergio Durigan Junior
Alan Hayward
Sandra Loosemore
Simon Marchi
Pedro Alves
Sergei Trofimovich
Leszek Swirski
Kevin Buettner
Pedro Franco de Carvalho
Thomas Schwinge
Marco Barisione
Jon Turney
Simon Marchi
John Baldwin
Hannes Domani
Владимир Мартьянов