We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
This patch adds support for .cfi_val_offset GAS pseudo command which
maps to DW_CFA_val_offset and DW_CFA_val_offset_sf.
gas/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* doc/as.texinfo: Add docu for .cfi_val_offset.
* dw2gencfi.c (cfi_add_CFA_val_offset): New function.
(dot_cfi): Add case for DW_CFA_val_offset.
(output_cfi_insn): Likewise.
(cfi_pseudo_table): Add entry for cfi_val_offset.
* dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset.
* testsuite/gas/cfi/cfi-common-8.d: New test.
* testsuite/gas/cfi/cfi-common-8.s: New test.
* testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (display_debug_frames): Adjust output line.
Before SPARC V9 the effect of having a delayed branch instruction in the
delay slot of a conditional delayed branch was undefined.
In SPARC V9 DCTI couples are well defined.
However, starting with the UltraSPARC Architecture 2005, DCTI
couples (of all kind) are deprecated and should not be used, as they may
be slow or behave differently to what the programmer expects.
This patch adds a new command line option --dcti-couples-detect to `as',
disabled by default, that makes the assembler to warn the user if an
unpredictable DCTI couple is found. Tests and documentation are
included.
gas/ChangeLog:
2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (md_assemble): Detect and warning on
unpredictable DCTI couples in certain arches.
(dcti_couples_detect): New global.
(md_longopts): Add command line option -dcti-couples-detect.
(md_show_usage): Document -dcti-couples-detect.
(md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run
dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests.
* testsuite/gas/sparc/dcti-couples.s: New file.
* testsuite/gas/sparc/dcti-couples-v9c.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v8.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v9.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v9c.l: Likewise.
* testsuite/gas/sparc/dcti-couples-v8.l: Likewise.
* doc/as.texinfo (Overview): Document --dcti-couples-detect.
* doc/c-sparc.texi (Sparc-Opts): Likewise.
This patch adds alternate CPU names which adhere to the number of the
architecture document. So instead of having z196, zEC12, and z13 you
can use arch9, arch10, and arch11. The old cpu names stay valid and
should primarily be used.
The alternate names are supposed to improve compatibility with the IBM
XL compiler toolchain which uses the arch numbering.
opcodes/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Support alternate arch strings.
gas/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Support alternate arch
strings.
* doc/as.texinfo: Document new arch strings.
* doc/c-s390.texi: Likewise.
PR gas/20247
* as.h (do_not_pad_sections_to_alignment): New global variable.
* as.c (show_usage): Add --no-pad-sections.
(parse_args): Likewise.
* write.c (size_seg): Skip padding the end of the section if
requested from the command line.
(SUB_SEGMENT_ALIGN): Likewise.
* doc/as.texinfo: Document the new option.
* NEWS: Mention the new feature.
* testsuite/gas/elf/section11.s: New test.
* testsuite/gas/elf/section11.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
gas * doc/as.texinfo: Place the target specific command line options
into their own man page section.
etc * texi2pod.pl: Add TARGET to the list of recognised man page
sections.
gas * doc/as.texinfo (.section): Document that numeric values can now
be used for the flags and type fields of the ELF target's .section
directive. Add notes about the restrictions on setting flags and
types.
* config/obj-elf.c (obj_elf_change_section): Allow known sections
to be given processor specific section types. Allow processor and
application specific flags of a section to be set after
definition.
(obj_elf_parse_section_letters): Handle parsing numeric values.
(obj_elf_section_type): Handle parsing numeric values.
(obj_elf_section): Allow numeric type values.
* config/obj-elf.h (obj_elf_change_section): Update prototype.
* testsuite/gas/elf/section10.d: New test.
* testsuite/gas/elf/section10.s: Source file for new test.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon
the description of the flags produced by readelf.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
* NEWS: Mention the new feature.
bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values
for length and type fields. Use a signed value for the
suffix_length field.
binutils* readelf.c (get_section_type_name): Add hex prefix to offsets
printed for LOPROC and LOOS values. Ensure that a result is
always returned for the V850 target, even when an unrecognised
processor specific value is encountered.
(process_section_headers): Display key values in the order in
which they appear to the user. Add the "C (compressed)" value to
the list.
ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the
description of the flags produced by readelf.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-i386/tlsbin-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin.rd: Likewise.
* testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbindesc.rd: Likewise.
* testsuite/ld-i386/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsdesc.rd: Likewise.
* testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsgdesc.rd: Likewise.
* testsuite/ld-i386/tlsnopic-nacl.rd: Likewise.
* testsuite/ld-i386/tlsnopic.rd: Likewise.
* testsuite/ld-i386/tlspic-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic.rd: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-s390/tlspic.rd: Likewise.
* testsuite/ld-s390/tlspic_64.rd: Likewise.
* testsuite/ld-sh/tlsbin-2.d: Likewise.
* testsuite/ld-sh/tlspic-2.d: Likewise.
* testsuite/ld-tic6x/common.d: Likewise.
* testsuite/ld-tic6x/shlib-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
* testsuite/ld-tic6x/static-app-1.rd: Likewise.
* testsuite/ld-tic6x/static-app-1b.rd: Likewise.
* testsuite/ld-tic6x/static-app-1r.rd: Likewise.
* testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
* testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise.
* testsuite/ld-x86-64/split-by-file.rd: Likewise.
* testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
* testsuite/ld-x86-64/tlspic-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic.rd: Likewise.
* testsuite/ld-xtensa/tlsbin.rd: Likewise.
* testsuite/ld-xtensa/tlspic.rd: Likewise.
PR gas/19614
* dw2gencfi.c (cfi_sections_set): Delay setting this variable
until it is actually used.
(cfi_set_sections): Set cfi_sections_set to true.
(dot_cfi_startproc): Likewise.
(dot_cfi_endproc): Likewise.
(dot_cfi_fde_data): Likewise.
(cfi_finish): Likewise.
(dot_cfi_sections): Do not set cfi_sections_set.
* doc/as.texinfo (.cfi_sections): Note that targets can provide
their own cfi section name. Also note that the directive can be
reissued provided that CFI generation has not started.
* testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and
.cfi_endproc directives so that the redefinition of .cfi_sections
will trigger the generation of the error message.
* testsuite/gas/mips/compact-eh-err2.l: Update expected line
number of error message.
PR gas/19386
* doc/as.texinfo (Strings): Prepend a space to index entries that
start with a backslash. This works around a problem in the pdf
generator.
PR gas/19109
* configure.ac: Add option --enable-compressed-debug-sections.
This sets the default behaviour for compressing debug sections.
* as.c (flag_compress_debug): Define and initialise to
COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
(show_usage): Indicate whether --no-compress-debug-sections
or --compress-debug-sections is the default.
* config/tc-i386.c (flag_compress_debug): Delete definition.
* doc/as.texinfo (--nocompress-debug-sectionas): Update
description.
* NEWS: Announce the new feature.
* config.in: Regenerate.
* configure: Regenerate.
Auto-litpools is the automated version of text-section-literals: literal
pool candidate frags are planted every N frags and during relaxation
they are turned into actual literal pools where literals are moved to
become reachable for their first reference by L32R instruction.
2015-08-12 David Weatherford <weath@cadence.com>
gas/
* config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
New structures.
(xtensa_maybe_create_literal_pool_frag): New function.
(litpool_seg_list, auto_litpools, auto_litpool_limit)
(litpool_buf, litpool_slotbuf): New static variables.
(option_auto_litpools, option_no_auto_litpools)
(option_auto_litpool_limit): New enum identifiers.
(md_longopts): Add entries for auto-litpools, no-auto-litpools
and auto-litpool-limit.
(md_parse_option): Handle option_auto_litpools,
option_no_auto_litpools and option_auto_litpool_limit.
(md_show_usage): Add help for --[no-]auto-litpools and
--auto-litpool-limit.
(xtensa_mark_literal_pool_location): Record a place for literal
pool with a call to xtensa_maybe_create_literal_pool_frag.
(get_literal_pool_location): Find highest priority literal pool
or convert candidate to literal pool when auto-litpools are used.
(xg_assemble_vliw_tokens): Create literal pool after jump
instruction.
(xtensa_check_frag_count): Create candidate literal pool every
auto_litpool_limit frags.
(xtensa_relax_frag): Add jump around literals to non-empty
literal pool.
(xtensa_move_literals): Estimate literal pool addresses and move
unreachable literals closer to their users, converting candidate
to literal pool if needed.
(xtensa_switch_to_non_abs_literal_fragment): Only emit error
about missing .literal_position in case auto-litpools are not
used.
* config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
* doc/as.texinfo (Xtensa options): Document --auto-litpools and
--no-auto-litpools options.
* doc/c-xtensa.texi (Xtensa options): Likewise.
2015-08-12 Max Filippov <jcmvbkbc@gmail.com>
gas/testsuite/
* gas/xtensa/all.exp: Add auto-litpools to the list of xtensa
tests.
* gas/xtensa/auto-litpools.s: New file: auto-litpools test.
* gas/xtensa/auto-litpools.s: New file: auto-litpools test
result pattern.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
Commit 2f0c68f23bb3132cd5ac466ca8775c0d9e4960cd added an extra @section
.cfi_lsda:
@subsection @code{.cfi_lsda @var{encoding} [, @var{exp}]}
+@section @code{.cfi_lsda @var{encoding} [, @var{exp}]}
@code{.cfi_lsda} defines LSDA and its encoding.
It shouldn't be there.
* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
This patch adds the ability to automatically construct a section name
based on the prior section.
When gas is invoked with --sectname-subst, the occurrence of %S in a
section name will be substituted by the name of the current section. For
example:
.macro exception_code
.pushsection %S.exception
[exception code here]
.popsection
.endm
.text
[code]
exception_code
[...]
.section .init
[init code]
exception_code
[...]
The first and second exception_code invocations create the
.text.exception and the .init.exception sections respectively. This is
useful e.g. to discriminate between anciliary sections that are tied to
.init code and can be discarded at run time when initialization is over
vs anciliary sections tied to .text sections that need to stay resident.
* as.c (show_usage): Document --sectname-subst.
(parse_args): Add --sectname-subst.
* as.h (flag_sectname_subst): New.
* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
* doc/as.texinfo: Document it.
This patch silences texinfo 5.1 warnings by using @subsection and
sorting entries in Machine Dependencies menu.
* doc/as.texinfo (Bundle directives): Shorten menu entry and
use @subsection.
(CFI directives): Use @subsection.
(SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
* doc/c-i386.texi (i386-Mnemonics): Use @subsection.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
PR binutils/18087
gas * doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or
.debug_info sections to be compressed.
binu * doc/binutils.texi: Note that when objcopy compresses debug
sections the compression is only performed if it makes the section
smaller.
bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a
debug section's name if the section was actually compressed.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
* compress.c (bfd_init_section_compress_status): Do not compress
the section if doing so would make it bigger. In such cases leave
the section alone and return COMPRESS_SECTION_NONE.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
or 64-bit doubles. It also makes the linker complain if the user attempts
to link together binaries with different sized doubles.
* elf32-rl78.c (rl78_elf_merge_private_bfd_data): Complain if
64-bit doubles objects mix with 32-bit doubles objects.
(rl78_elf_print_private_bfd_data): Describe 64-bit doubles flag.
* readelf.c (get_machine_flags): Handle RL78 64-bit doubles flag.
* config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
and OPTION_64BIT_DOUBLES.
(md_longopts): Add -m32bit-doubles and -m64bit-doubles.
(md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
(md_show_usage): Show all of the RL78 options.
(rl78_float_cons): New static functions.
(md_pseudo_table): Update handler for "double".
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
Dimitar Dimitrov