988f6b3dc6
150 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tristan Gingold
|
55a09eb6df |
Add markers.
binutils/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. gas/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. ld/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. |
||
|
Maciej W. Rozycki
|
909b4e3d5f |
MIPS: Add microMIPS XPA support
Add support for the base and Virtualization ASE microMIPS instructions
as per the architecture specifications[1][2][3][4].
Most of this change by Andrew Bennett.
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", p. 340
[2] "microMIPS32 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00848, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 133, 136
[3] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 415, 444
[4] "microMIPS64 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00849, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 134-135, 139-140
binutils/
* NEWS: Mention microMIPS XPA support.
opcodes/
* micromips-opc.c (XPA, XPAVZ): New macros.
(micromips_opcodes): Add "mfhc0", "mfhgc0", "mthc0" and
"mthgc0".
gas/
* config/tc-mips.c (mips_ases): Add microMIPS XPA support.
* testsuite/gas/mips/micromips@xpa.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test. Enable
`xpa-virt-err' test for `micromips'.
|
||
|
Maciej W. Rozycki
|
f5b2fd523f |
MIPS: Add microMIPS R5 support
Add base microMIPS Release 5 ISA support and the ERETNC instruction in
particular, as per the architecture specifications[1][2].
Most of this change by Andrew Bennett.
References:
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 266-267
[2] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 326-327
binutils/
* NEWS: Mention microMIPS Release 5 ISA support.
opcodes/
* micromips-opc.c (I36): New macro.
(micromips_opcodes): Add "eretnc".
gas/
* testsuite/gas/mips/micromips@r5.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
|
||
|
Maciej W. Rozycki
|
38bf472a15 |
MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor support
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
|
||
|
Jose E. Marchesi
|
6451799480 |
binutils: support for the SPARC M8 processor
This patch adds support for the new SPARC M8 processor (implementing OSA
2017) to binutils.
New instructions:
- Dictionary Unpack
+ dictunpack
- Partitioned Compare with shifted result
+ Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl
+ Unsigned variants: fpcmpu{le,gt}{8,16,32}shl
- Partitioned Dual-Equal compared, with shifted result
+ fpcmpde{8,16,32}shl
- Partitioned Unsigned Range Compare, with shifted result
+ fpcmpur{8,16,32}shl
- 64-bit shifts on Floating-Point registers
+ fps{ll,ra,rl}64x
- Misaligned loads and stores
+ ldm{sh,uh,sw,uw,x,ux}
+ ldm{sh,uh,sw,uw,x,ux}a
+ ldmf{s,d}
+ ldmf{s,d}a
+ stm{h,w,x}
+ stm{h,w,x}a
+ stmf{s,d}
+ stmf{s,d}a
- Oracle Numbers
+ on{add,sub,mul,div}
- Reverse Bytes/Bits
+ revbitsb
+ revbytes{h,w,x}
- Run-Length instructions
+ rle_burst
+ rle_length
- New crypto instructions
+ sha3
- Instruction to read the new register %entropy
+ rd %entropy
New Alternate Address Identifiers:
- 0x24, #ASI_CORE_COMMIT_COUNT
- 0x24, #ASI_CORE_SELECT_COUNT
- 0x48, #ASI_ARF_ECC_REG
- 0x53, #ASI_ITLB_PROBE
- 0x58, #ASI_DSFAR
- 0x5a, #ASI_DTLB_PROBE_PRIMARY
- 0x5b, #ASI_DTLB_PROBE_REAL
- 0x64, #ASI_CORE_SELECT_COMMIT_NHT
The new assembler command-line options for selecting the M8 architecture
are:
-Av9m8 or -Asparc6 for 64-bit binaries.
-Av8plusm8 for 32-bit (v8+) binaries.
The corresponding disassembler command-line options are:
-msparc:v9m8 for 64-bit binaries.
-msparc:v8plusm8 for 32-bit (v8+) binaries.
Tested for regressions in the following targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
bfd/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v9m8): Define.
(bfd_mach_sparc_v8plusm8): Likewise.
(bfd_mach_sparc_v9_p): Adjust to M8.
(bfd_mach_sparc_64bit_p): Likewise.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and
bfd_mach_sparc_v8plusm8.
* bfd-in2.h: Regenerated.
* cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and
sparc:v8plusm8.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle
bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw
capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and
SHA3.
* elf32-sparc.c (elf32_sparc_final_write_processing): Handle
bfd_mach_sparc_v8plusm8.
binutils/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* NEWS: Mention the SPARC M8 support.
gas/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_arch_table): Entries for `sparc6',
`v9m8' and `v8plusm8'.
(sparc_md_end): Handle SPARC_OPCODE_ARCH_M8.
(get_hwcap_name): Support the M8 hardware capabilities.
(sparc_ip): Handle new operand types.
* doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and
-Asparc6, and the corresponding -xarch aliases.
* testsuite/gas/sparc/sparc6.s: New file.
* testsuite/gas/sparc/sparc6.d: Likewise.
* testsuite/gas/sparc/sparc6-diag.s: Likewise.
* testsuite/gas/sparc/sparc6-diag.l: Likewise.
* testsuite/gas/sparc/fpcmpshl.s: Likewise.
* testsuite/gas/sparc/fpcmpshl.d: Likewise.
* testsuite/gas/sparc/fpcmpshl-diag.s: Likewise.
* testsuite/gas/sparc/fpcmpshl-diag.l: Likewise.
* testsuite/gas/sparc/ldm-stm.s: Likewise.
* testsuite/gas/sparc/ldm-stm.d: Likewise.
* testsuite/gas/sparc/ldm-stm-diag.s: Likewise.
* testsuite/gas/sparc/ldm-stm-diag.l: Likewise.
* testsuite/gas/sparc/ldmf-stmf.s: Likewise.
* testsuite/gas/sparc/ldmf-stmf.d: Likewise.
* testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise.
* testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise.
* testsuite/gas/sparc/on.s: Likewise.
* testsuite/gas/sparc/on.d: Likewise.
* testsuite/gas/sparc/on-diag.s: Likewise.
* testsuite/gas/sparc/on-diag.l: Likewise.
* testsuite/gas/sparc/rle.s: Likewise.
* testsuite/gas/sparc/rle.d: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests.
* testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY.
* testsuite/gas/sparc/rdasr.d: Likewise.
include/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define.
(ELF_SPARC_HWCAP2_ONADDSUB): Likewise.
(ELF_SPARC_HWCAP2_ONMUL): Likewise.
(ELF_SPARC_HWCAP2_ONDIV): Likewise.
(ELF_SPARC_HWCAP2_DICTUNP): Likewise.
(ELF_SPARC_HWCAP2_FPCMPSHL): Likewise.
(ELF_SPARC_HWCAP2_RLE): Likewise.
(ELF_SPARC_HWCAP2_SHA3): Likewise.
* opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8
and adjust SPARC_OPCODE_ARCH_MAX.
(HWCAP2_SPARC6): Define.
(HWCAP2_ONADDSUB): Likewise.
(HWCAP2_ONMUL): Likewise.
(HWCAP2_ONDIV): Likewise.
(HWCAP2_DICTUNP): Likewise.
(HWCAP2_FPCMPSHL): Likewise.
(HWCAP2_RLE): Likewise.
(HWCAP2_SHA3): Likewise.
(OPM): Likewise.
(OPMI): Likewise.
(ONFCN): Likewise.
(REVFCN): Likewise.
(SIMM10): Likewise.
opcodes/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8.
(X_IMM2): Define.
(compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and
bfd_mach_sparc_v9m8.
(print_insn_sparc): Handle new operand types.
* sparc-opc.c (MASK_M8): Define.
(v6): Add MASK_M8.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Likewise.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(v9andleon): Likewise.
(m8): Define.
(HWS_VM8): Define.
(HWS2_VM8): Likewise.
(sparc_opcode_archs): Add entry for "m8".
(sparc_opcodes): Add OSA2017 and M8 instructions
dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl,
fpx{ll,ra,rl}64x,
ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d},
ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb,
revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x},
stm{h,w,x}a, stmf{s,d}, stmf{s,d}a.
(asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT,
ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR,
ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL,
ASI_CORE_SELECT_COMMIT_NHT.
|
||
|
Maciej W. Rozycki
|
25499ac7ee |
MIPS16e2: Add MIPS16e2 ASE support
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
|
||
|
H.J. Lu
|
a91e1603af |
Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
|
||
|
Pip Cet
|
efdf7a02db |
Fix minor problems with previous wasm32 binutils commit.
binutils * NEWS: Use "WebAssembly" consistently. * testsuite/binutils-all/wasm32/wasm32.exp: Fix copyright notice. |
||
|
Pip Cet
|
f96bd6c2d7 |
Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils.
binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate. |
||
|
Andi Kleen
|
4a14e30646 |
Add --inlines option to objdump to include scope backtrace of inlined functions when generating source line number information.
* objdump.c (unwind_inlines): Add. (option_values): Add OPTION_INLINES. (show_line): Unwind inlines if requested. (main): Parse OPTION_INLINES. (usage): Document --inlines. * doc/binutils.texi: Document --inlines. * NEWS: Likewise. |
||
|
Nick Clifton
|
9ef920e933 |
Add support for displaying and merging GNU_BUILD_NOTEs.
include * elf/common.h (SHF_GNU_BUILD_NOTE): Define. (NT_GNU_PROPERTY_TYPE_0): Define. (NT_GNU_BUILD_ATTRIBUTE_OPEN): Define. (NT_GNU_BUILD_ATTRIBUTE_FUN): Define. (GNU_BUILD_ATTRIBUTE_TYPE_NUMERIC): Define. (GNU_BUILD_ATTRIBUTE_TYPE_STRING): Define. (GNU_BUILD_ATTRIBUTE_TYPE_BOOL_TRUE): Define. (GNU_BUILD_ATTRIBUTE_TYPE_BOOL_FALSE): Define. (GNU_BUILD_ATTRIBUTE_VERSION): Define. (GNU_BUILD_ATTRIBUTE_STACK_PROT): Define. (GNU_BUILD_ATTRIBUTE_RELRO): Define. (GNU_BUILD_ATTRIBUTE_STACK_SIZE): Define. (GNU_BUILD_ATTRIBUTE_TOOL): Define. (GNU_BUILD_ATTRIBUTE_ABI): Define. (GNU_BUILD_ATTRIBUTE_PIC): Define. (NOTE_GNU_PROPERTY_SECTION_NAME): Define. (GNU_BUILD_ATTRS_SECTION_NAME): Define. (GNU_PROPERTY_STACK_SIZE): Define. (GNU_PROPERTY_NO_COPY_ON_PROTECTED): Define. (GNU_PROPERTY_X86_ISA_1_USED): Define. (GNU_PROPERTY_X86_ISA_1_NEEDED): Define. (GNU_PROPERTY_X86_ISA_1_486): Define. (GNU_PROPERTY_X86_ISA_1_586): Define. (GNU_PROPERTY_X86_ISA_1_686): Define. (GNU_PROPERTY_X86_ISA_1_SSE): Define. (GNU_PROPERTY_X86_ISA_1_SSE2): Define. (GNU_PROPERTY_X86_ISA_1_SSE3): Define. (GNU_PROPERTY_X86_ISA_1_SSSE3): Define. (GNU_PROPERTY_X86_ISA_1_SSE4_1): Define. (GNU_PROPERTY_X86_ISA_1_SSE4_2): Define. (GNU_PROPERTY_X86_ISA_1_AVX): Define. (GNU_PROPERTY_X86_ISA_1_AVX2): Define. (GNU_PROPERTY_X86_ISA_1_AVX512F): Define. (GNU_PROPERTY_X86_ISA_1_AVX512CD): Define. (GNU_PROPERTY_X86_ISA_1_AVX512ER): Define. (GNU_PROPERTY_X86_ISA_1_AVX512PF): Define. (GNU_PROPERTY_X86_ISA_1_AVX512VL): Define. (GNU_PROPERTY_X86_ISA_1_AVX512DQ): Define. (GNU_PROPERTY_X86_ISA_1_AVX512BW): Define. binutils* readelf.c (get_note_type): Add support for GNU_BUILD_NOTEs. (get_gnu_elf_note_type): Add support for GNU_PROPERTY_NOTEs. (decode_x86_isa): New function. (print_gnu_property_note): New function. (print_gnu_note): Handle GNU_PROPERTY_NOTEs. (print_gnu_build_attribute_description): New function. (print_gnu_build_attribute_name): New function. (process_note): Add support for GNU_BUILD_NOTEs. * objcopy.c (--merge-notes): New command line option. (copy_options): Add merge-notes. (copy_usage): Likewise. (is_merge_note_section): New function. (merge_gnu_build_notes): New function. (copy_object): Merge note sections if asked to do so. (skip_section): Add skip_copy parameter. Add support for skipping merged note sections. (copy_relocations_in_section): Update call to skip_section. (copy_section): Likewise. (copy_main): Add support for merge-notes option. * doc/binutils.texi: Document the new option to objcopy. * NEWS: Mention the new feature. * testsuite/binutils-all/note-2-32.d: New test. Checks note merging on 32-bit targets. * testsuite/binutils-all/note-2-32.s: New test source file. * testsuite/binutils-all/note-2-64.d: New test. Like note-2-32.d but for 64-bit targets. * testsuite/binutils-all/note-2-64.s: New test source file. * testsuite/binutils-all/objcopy.exp: Run the new test. |
||
|
Nick Clifton
|
2425a30e40 |
Add support for locating separate debug info files via the build-id method.
PR binutils/20876 bfd * opncls.c (find_separate_debug_file): Add include_dirs parameter. Only include the directory part of the bfd's filename in search paths if include_dirs is true. Add a couple of extra locations for looking for debug files. ( bfd_follow_gnu_debuglink): Update invocation of find_separate_debug_file. (bfd_follow_gnu_debugaltlink): Likewise. (get_build_id): New function: Finds the build-id of the given bfd. (get_build_id_name): New function: Computes the name of the separate debug info file for a bfd, based upon its build-id. (check_build_id_file): New function: Checks to see if a separate debug info file exists at the given location, and that its build-id matches that of the original bfd. (bfd_follow_build_id_debuglink): New function: Finds a separate debug info file for a given bfd by using the build-id method. * dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id method of locating a separate debug info file before using the debuglink method. * bfd-in2.h: Regenerate. binutils * NEWS: Mention the new feature. * testsuite/binutils-all/objdump.exp (test_build_id_debuglink): New proc to test the location of separate debug info files using the build-id method. |
||
|
Alan Modra
|
2571583aed | Update year range in copyright notice of all files. | ||
|
Tristan Gingold
|
9703a4ef4d |
Add marker in NEWS files
binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. |
||
|
Alan Modra
|
08dc996fed |
PR20744, Incorrect PowerPC VLE relocs
VLE 16A and 16D relocs were functionally swapped. PR 20744 include/ * opcode/ppc.h: Define VLE insns using 16A and 16D relocs. bfd/ * elf32-ppc.h (struct ppc_elf_params): Add vle_reloc_fixup field. * elf32-ppc.c: Include opcode/ppc.h. (ppc_elf_howto_raw): Correct dst_mask for R_PPC_VLE_LO16A, R_PPC_VLE_LO16D, R_PPC_VLE_HI16A, R_PPC_VLE_HI16D, R_PPC_VLE_HA16A, R_PPC_VLE_HA16D, R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_LO16D, R_PPC_VLE_SDAREL_HI16A, R_PPC_VLE_SDAREL_HI16D, R_PPC_VLE_SDAREL_HA16A, and R_PPC_VLE_SDAREL_HA16D relocs. (ppc_elf_link_hash_table_create): Update default_params init. (ppc_elf_vle_split16): Correct shift and mask. Add params. Report or fix insn/reloc mismatches. (ppc_elf_relocate_section): Pass input_section, offset and fixup to ppc_elf_vle_split16. binutils/ * NEWS: Mention PowerPC VLE relocation error. gas/ * config/tc-ppc.c: Delete VLE insn defines. (md_assemble): Swap use_a_reloc and use_d_reloc. * testsuite/gas/ppc/vle-reloc.d: Update. ld/ * emultempl/ppc32elf.em (params): Update initializer. Handle --vle-reloc-fixup command line arg. |
||
|
Nick Clifton
|
df2c87b580 |
Add the ability for nm to display symbol version information.
PR binutils/20751 * nm.c (with_symbol_versions): New local variable. (long_options): Add --with-symbol-versions. (usage): Mention --with-symbol-versions. (print_symbol): If with_symbol_versions is set then display the version information associated with the symbol. * NEWS: Mention the new feature. * doc/binutils.texi (nm): Document the new option. (objdump): Describe how symbol version information is displayed for dynamic symbol dumps. (readelf): Describe how symbol version information is displayed. * testsuite/binutils-all/nm.exp: Add a test of the new feature. |
||
|
Claudiu Zissulescu
|
37fd5ef3ec |
Add support to the ARC disassembler for selecting instruction classes.
gas * testsuite/gas/arc/dsp.d: New file. * testsuite/gas/arc/dsp.s: Likewise. * testsuite/gas/arc/fpu.d: Likewise. * testsuite/gas/arc/fpu.s: Likewise. * testsuite/gas/arc/ext2op.d: Add specific disassembler option. * testsuite/gas/arc/ext3op.d: Likewise. * testsuite/gas/arc/tdpfp.d: Likewise. * testsuite/gas/arc/tfpuda.d: Likewise. opcodes * arc-dis.c (skipclass): New structure. (decodelist): New variable. (is_compatible_p): New function. (new_element): Likewise. (skip_class_p): Likewise. (find_format_from_table): Use skip_class_p function. (find_format): Decode first the extension instructions. (print_insn_arc): Select either ARCEM or ARCHS based on elf e_flags. (parse_option): New function. (parse_disassembler_options): Likewise. (print_arc_disassembler_options): Likewise. (print_insn_arc): Use parse_disassembler_options function. Proper select ARCv2 cpu variant. * disassemble.c (disassembler_usage): Add ARC disassembler options. binutils* doc/binutils.texi (objdump): Add ARC disassembler options. * testsuite/binutils-all/arc/dsp.s: New file. * testsuite/binutils-all/arc/objdump.exp: Likewise. include * dis-asm.h: Declare print_arc_disassembler_options. |
||
|
Andrew Burgess
|
d3e5f6c8f1 |
objcopy/strip: Add option --remove-relocations=SECTIONPATTERN
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file). Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:
objcopy --remove-section=.rela.text input.elf output.elf
However, this does not work. The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied. In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.
One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.
This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:
objcopy --remove-relocations=.text input.elf output.elf
in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.
I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.
As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.
There are tests for all the new functionality.
binutils/ChangeLog:
* doc/binutils.texi (objcopy): Document 'remove-relocations'.
(strip): Likewise.
* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
(struct option strip_options): Add 'remove-relocations'.
(struct option copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(handle_remove_relocations_option): New function.
(discard_relocations): New function.
(handle_remove_section_option): New function.
(copy_relocations_in_section): Use discard_relocations.
(strip_main): Use handle_remove_section_option for
'remove-section', and handle 'remove-relocations' option.
(copy_main): Likewise.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* testsuite/binutils-all/remove-relocs-01.d: New file.
* testsuite/binutils-all/remove-relocs-01.s: New file.
* testsuite/binutils-all/remove-relocs-02.d: New file.
* testsuite/binutils-all/remove-relocs-03.d: New file.
* testsuite/binutils-all/remove-relocs-04.d: New file.
* testsuite/binutils-all/remove-relocs-05.d: New file.
* testsuite/binutils-all/remove-relocs-06.d: New file.
|
||
|
Andrew Burgess
|
e511c9b19f |
objcopy/strip: Allow section patterns starting with '!'.
For symbol matching, prefixing a pattern with '!' will indicate a non-matching pattern, however, this is not the case for section patterns. As a result it is not possible to say "apply this action to all sections except ...". With this commit the objcopy and strip tools now support '!' prefix for section patterns, so we can say: objcopy --remove-section="*" --remove-section="!.text*" Which will remove all sections, except those matching the pattern '.text*'. binutils/ChangeLog: * objcopy.c (find_section_list): Handle section patterns starting with '!' being a non-matching pattern. * doc/binutils.texi (objcopy): Give example of using '!' with --remove-section and --only-section. (strip): Give example of using '!' with --remove-section. * testsuite/binutils-all/data-sections.s: New file. * testsuite/binutils-all/only-section-01.d: New file. * testsuite/binutils-all/remove-section-01.d: New file. * testsuite/binutils-all/objcopy.exp: Run new tests. * NEWS: Mention new feature. |
||
|
Tristan Gingold
|
96a84ea350 |
Add marker for 2.27 branch.
binutils/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. gas/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. ld/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. |
||
|
H.J. Lu
|
e6cc316af9 |
Enable 64-bit archives in ar and ranlib
Since existing ld and gold support the 64-bit (MIPS) ELF archives, we can use the 64-bit (MIPS) ELF archives as 64-bit archives. Since the plugin target is used to create archive in plugin-enabled ar, we need a way to enable 64-bit archives in the plugin target. This patch adds --enable-64-bit-archive to bfd to force 64-bit archives in ar and ranlib. Since both 64-bit MIPS and s390 ELF targets currently use 64-bit archives, 64-bit archives are enabled by default for them. 64-bit archive is generated automatically if the archive is too big. Tested on Linux/x86 and Linux/x86-64 with existing ld and gold. bfd/ PR binutils/14625 * archive.c (bfd_slurp_armap): Replace bfd_elf64_archive_slurp_armap with _bfd_archive_64_bit_slurp_armap. (bsd_write_armap): Call _bfd_archive_64_bit_write_armap if BFD64 is defined and the archive is too big. (coff_write_armap): Likewise. * archive64.c (bfd_elf64_archive_slurp_armap): Renamed to ... (_bfd_archive_64_bit_slurp_armap): This. (bfd_elf64_archive_write_armap): Renamed to ... (_bfd_archive_64_bit_write_armap): This. * configure.ac: Add --enable-64-bit-archive. (want_64_bit_archive): New. Set to true by default for 64-bit MIPS and s390 ELF targets. (USE_64_BIT_ARCHIVE): New AC_DEFINE. * config.in: Regenerated. * configure: Likewise. * elf64-mips.c (bfd_elf64_archive_functions): Removed. (bfd_elf64_archive_slurp_armap): Likewise. (bfd_elf64_archive_write_armap): Likewise. (bfd_elf64_archive_slurp_extended_name_table): Likewise. (bfd_elf64_archive_construct_extended_name_table): Likewise. (bfd_elf64_archive_truncate_arname): Likewise. (bfd_elf64_archive_read_ar_hdr): Likewise. (bfd_elf64_archive_write_ar_hdr): Likewise. (bfd_elf64_archive_openr_next_archived_file): Likewise. (bfd_elf64_archive_get_elt_at_index): Likewise. (bfd_elf64_archive_generic_stat_arch_elt): Likewise. (bfd_elf64_archive_update_armap_timestamp): Likewise. * elf64-s390.c (bfd_elf64_archive_functions): Removed. (bfd_elf64_archive_slurp_armap): Likewise. (bfd_elf64_archive_write_armap): Likewise. (bfd_elf64_archive_slurp_extended_name_table): Likewise. (bfd_elf64_archive_construct_extended_name_table): Likewise. (bfd_elf64_archive_truncate_arname): Likewise. (bfd_elf64_archive_read_ar_hdr): Likewise. (bfd_elf64_archive_write_ar_hdr): Likewise. (bfd_elf64_archive_openr_next_archived_file): Likewise. (bfd_elf64_archive_get_elt_at_index): Likewise. (bfd_elf64_archive_generic_stat_arch_elt): Likewise. (bfd_elf64_archive_update_armap_timestamp): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Use _bfd_archive_64_bit on BFD_JUMP_TABLE_ARCHIVE if USE_64_BIT_ARCHIVE is defined and bfd_elfNN_archive_functions isn't defined. (TARGET_LITTLE_SYM): Likewise. * libbfd-in.h (_bfd_archive_64_bit_slurp_armap): New prototype. (_bfd_archive_64_bit_write_armap): Likewise. (_bfd_archive_64_bit_slurp_extended_name_table): New macro. (_bfd_archive_64_bit_construct_extended_name_table): Likewise. (_bfd_archive_64_bit_truncate_arname): Likewise. (_bfd_archive_64_bit_read_ar_hdr): Likewise. (_bfd_archive_64_bit_write_ar_hdr): Likewise. (_bfd_archive_64_bit_openr_next_archived_file): Likewise. (_bfd_archive_64_bit_get_elt_at_index): Likewise. (_bfd_archive_64_bit_generic_stat_arch_elt): Likewise. (_bfd_archive_64_bit_update_armap_timestamp): Likewise. * libbfd.h: Regenerated. * plugin.c (plugin_vec): Use _bfd_archive_64_bit on BFD_JUMP_TABLE_ARCHIVE if USE_64_BIT_ARCHIVE is defined. binutils/ PR binutils/14625 * NEWS: Mention --enable-64-bit-archive. |
||
|
H.J. Lu
|
b8871f357f |
Properly implement STT_COMMON
The BFD configure option, --enable-elf-stt-common, can't be to used to
verify STT_COMMON implementation with the normal binutils build. Instead,
this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF
assembler/objcopy and adds -z common/-z nocommon to ld.
A configure option, --enable-elf-stt-common, is added to gas to specify
whether ELF assembler should generate common symbols with the STT_COMMON
type by default.
Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF
common symbols.
bfd/
PR ld/19645
* bfd.c (bfd): Change flags to 20 bits.
(BFD_CONVERT_ELF_COMMON): New.
(BFD_USE_ELF_STT_COMMON): Likewise.
(BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and
BFD_USE_ELF_STT_COMMON.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
* configure.ac: Remove --enable-elf-stt-common.
* elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for
common symbol depending on BFD_CONVERT_ELF_COMMON and
BFD_USE_ELF_STT_COMMON.
* elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for
STT_COMMON.
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check
STT_COMMON.
(elf_link_convert_common_type): New function.
(elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for
common symbol depending on BFD_CONVERT_ELF_COMMON and
BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx.
* elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON
and BFD_USE_ELF_STT_COMMON to object_flags.
(TARGET_LITTLE_SYM): Likewise.
* syms.c (BSF_KEEP_G): Renamed to ...
(BSF_ELF_COMMON): This.
* bfd-in2.h: Regenerated.
* config.in: Likewise.
* configure: Likewise.
binutils/
PR ld/19645
* NEWS: Mention --elf-stt-common= for objcopy.
* doc/binutils.texi: Document --elf-stt-common= for objcopy.
* objcopy.c (do_elf_stt_common): New.
(command_line_switch): Add OPTION_ELF_STT_COMMON.
(copy_options): Add --elf-stt-common=.
(copy_usage): Add --elf-stt-common=.
(copy_object): Also check do_elf_stt_common for ELF targets.
(copy_file): Handle do_elf_stt_common.
(copy_main): Handle OPTION_ELF_STT_COMMON.
* readelf.c (apply_relocations): Support STT_COMMON.
* testsuite/binutils-all/common-1.s: New file.
* testsuite/binutils-all/common-1a.d: Likewise.
* testsuite/binutils-all/common-1b.d: Likewise.
* testsuite/binutils-all/common-1c.d: Likewise.
* testsuite/binutils-all/common-1d.d: Likewise.
* testsuite/binutils-all/common-1e.d: Likewise.
* testsuite/binutils-all/common-1f.d: Likewise.
* testsuite/binutils-all/common-2.s: Likewise.
* testsuite/binutils-all/common-2a.d: Likewise.
* testsuite/binutils-all/common-2b.d: Likewise.
* testsuite/binutils-all/common-2c.d: Likewise.
* testsuite/binutils-all/common-2d.d: Likewise.
* testsuite/binutils-all/common-2e.d: Likewise.
* testsuite/binutils-all/common-2f.d: Likewise.
* testsuite/binutils-all/objcopy.exp
(objcopy_test_elf_common_symbols): New proc.
Run objcopy_test_elf_common_symbols for ELF targets
gas/
PR ld/19645
* NEWS: Mention --enable-elf-stt-common and --elf-stt-common=
for ELF assemblers.
* as.c (flag_use_elf_stt_common): New.
(show_usage): Add --elf-stt-common=.
(option_values): Add OPTION_ELF_STT_COMMON.
(std_longopts): Add --elf-stt-common=.
(parse_args): Handle --elf-stt-common=.
* as.h (flag_use_elf_stt_common): New.
* config.in: Regenerated.
* configure: Likewise.
* configure.ac: Add --enable-elf-stt-common and define
DEFAULT_GENERATE_ELF_STT_COMMON.
* gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON
and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set.
* doc/as.texinfo: Document --elf-stt-common=.
* testsuite/gas/elf/common3.s: New file.
* testsuite/gas/elf/common3a.d: Likewise.
* testsuite/gas/elf/common3b.d: Likewise.
* testsuite/gas/elf/common4.s: Likewise.
* testsuite/gas/elf/common4a.d: Likewise.
* testsuite/gas/elf/common4b.d: Likewise.
* testsuite/gas/i386/dw2-compress-3b.d: Likewise.
* testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
* testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a
and common4b.
* testsuite/gas/i386/dw2-compress-3.d: Renamed to ...
* testsuite/gas/i386/dw2-compress-3a.d: This. Pass
--elf-stt-common=no to as.
* testsuite/gas/i386/dw2-compressed-3.d: Renamed to ...
* testsuite/gas/i386/dw2-compressed-3a.d: This. Pass
--elf-stt-common=no to as.
* testsuite/gas/i386/i386.exp: Run dw2-compress-3a,
dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead
of dw2-compress-3 and dw2-compressed-3.
include/
PR ld/19645
* bfdlink.h (bfd_link_elf_stt_common): New enum.
(bfd_link_info): Add elf_stt_common.
ld/
PR ld/19645
* NEWS: Mention -z common/-z nocommon for ELF targets.
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle
-z common and -z nocommon.
* ld.texinfo: Document -z common/-z nocommon.
* lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon.
* testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and
--elf-stt-common=yes with assembler.
* testsuite/ld-elfcomm/common-1.s: New file.
* testsuite/ld-elfcomm/common-1a.d: Likewise.
* testsuite/ld-elfcomm/common-1b.d: Likewise.
* testsuite/ld-elfcomm/common-1c.d: Likewise.
* testsuite/ld-elfcomm/common-1d.d: Likewise.
* testsuite/ld-elfcomm/common-1e.d: Likewise.
* testsuite/ld-elfcomm/common-1f.d: Likewise.
* testsuite/ld-elfcomm/common-2.s: Likewise.
* testsuite/ld-elfcomm/common-2a.d: Likewise.
* testsuite/ld-elfcomm/common-2b.d: Likewise.
* testsuite/ld-elfcomm/common-2c.d: Likewise.
* testsuite/ld-elfcomm/common-2d.d: Likewise.
* testsuite/ld-elfcomm/common-2e.d: Likewise.
* testsuite/ld-elfcomm/common-2f.d: Likewise.
* testsuite/ld-elfcomm/common-3a.rd: Likewise.
* testsuite/ld-elfcomm/common-3b.rd: Likewise.
* testsuite/ld-i386/pr19645.d: Likewise.
* testsuite/ld-i386/pr19645.s: Likewise.
* testsuite/ld-x86-64/largecomm-1.s: Likewise.
* testsuite/ld-x86-64/largecomm-1a.d: Likewise.
* testsuite/ld-x86-64/largecomm-1b.d: Likewise.
* testsuite/ld-x86-64/largecomm-1c.d: Likewise.
* testsuite/ld-x86-64/largecomm-1d.d: Likewise.
* testsuite/ld-x86-64/largecomm-1e.d: Likewise.
* testsuite/ld-x86-64/largecomm-1f.d: Likewise.
* testsuite/ld-x86-64/pr19645.d: Likewise.
* testsuite/ld-x86-64/pr19645.s: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes
with assembler.
(assembler_generates_commons): Removed.
Run -z common/-z nocommon tests. Run *.d tests.
* testsuite/ld-i386/i386.exp: Run pr19645.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with
assembler. Test STT_COMMON with readelf.
|
||
|
Alan Modra
|
6f2750feaf | Copyright update for binutils | ||
|
Tristan Gingold
|
7feec526b7 |
Add markers for release 2.26
binutils/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. gas/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. ld/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. |
||
|
Ronald Hoogenbllon
|
2b35fb28f3 |
Add ability for objcopy to insert new symbols into a binary.
PR binutils/19104 binutils * objcopy.c (command_line_switch): Add OPTION_ADD_SYMBOL. (copy_options): Add add-symbol. (copy_usage): Likewise. (parse_symflags): New function. (need_sym_before): New function. (create_new_symbol): New function. (filter_symbols): Add code to insert new symbols. (copy_main): Process OPTION_ADD_SYMBOL. * doc/binutils.texi: Document new feature. * NEWS: Add note about the new feature. tests * binutils-all/add-symbol.d: New test. * binutils-all/objcopy.exp: Run the new test. |
||
|
Nick Clifton
|
886a250647 |
New ARC implementation.
bfd * archures.c: Remove support for older ARC. Added support for new
ARC cpus (ARC600, ARC601, ARC700, ARCV2).
* bfd-in2.h: Likewise.
* config.bfd: Likewise.
* cpu-arc.c: Likewise.
* elf32-arc.c: Totally changed file with a refactored
inplementation of the ARC port.
* libbfd.h: Added ARC specific relocation types.
* reloc.c: Likewise.
gas * config/tc-arc.c: Revamped file for ARC support.
* config/tc-arc.h: Likewise.
* doc/as.texinfo: Add new ARC options.
* doc/c-arc.texi: Likewise.
ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*.
* emulparams/arcebelf_prof.sh: New file
* emulparams/arcebelf.sh: Likewise.
* emulparams/arceblinux_prof.sh: Likewise.
* emulparams/arceblinux.sh: Likewise.
* emulparams/arcelf_prof.sh: Likewise.
* emulparams/arcelf.sh: Likewise.
* emulparams/arclinux_prof.sh: Likewise.
* emulparams/arclinux.sh: Likewise.
* emulparams/arcv2elfx.sh: Likewise.
* emulparams/arcv2elf.sh: Likewise.
* emultempl/arclinux.em: Likewise.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfarcv2.sc: Likewise
* Makefile.am: Add new ARC emulations.
* Makefile.in: Regenerate.
* NEWS: Mention the new feature.
opcodes * arc-dis.c: Revamped file for ARC support
* arc-dis.h: Likewise.
* arc-ext.c: Likewise.
* arc-ext.h: Likewise.
* arc-opc.c: Likewise.
* arc-fxi.h: New file.
* arc-regs.h: Likewise.
* arc-tbl.h: Likewise.
binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact
and ARCv2.
(get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_16bit_abs_reloc): Likewise.
(is_none_reloc): Likewise.
* NEWS: Mention the new feature.
include * dis-asm.h (arc_get_disassembler): Correct declaration.
* arc-reloc.def: Macro file with definition of all relocation
types.
* arc.h: Changed macros for the newly supported ARC cpus. Altered
enum defining the supported relocations.
* common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added
macro for EM_ARC_COMPACT2.
* arc-func.h: New file.
* arc.h: Likewise.
|
||
|
Erik Ackermann
|
55edd97b4b |
Adds an option to the strings program to specify a separator between the emitted pieces of text.
* strings.c: Add -s/--output-separator option to specify custom separator string. * NEWS: Mention the new feature. * doc/binutils.text (strings): Document the new command line option. |
||
|
H.J. Lu
|
3aade68889 | Remove trailing spaces in binutils | ||
|
H.J. Lu
|
ea556d2590 |
Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
binutils/ * NEWS: Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. gas/ * NEWS: Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. ld/ * NEWS: Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. |
||
|
Andrew Burgess
|
acf1419f9c |
objcopy: Add --update-section option.
New option for objcopy --update-section allows the contents of a section to be updated while maintaining the section flags, and, for ELF files, the section to segment mapping. New test uses --dump-section and --update-section to check that a section can be made larger and smaller with an update. binutils/ChangeLog: * objcopy.c (update_sections): New list. (command_line_switch): Add OPTION_UPDATE_SECTION. (copy_options): Add update-section. (copy_usage): Document new option. (is_update_section): New function. (is_strip_section_1): Add check for attempt to update and remove the same section. (copy_object): Update size and content of requested sections. (skip_section): Don't copy for updated sections. (copy_main): Handle --update-section. * doc/binutils.texi (objcopy): Add description of --update-section option. * NEWS: Mention --update-section option. binutils/testsuite/ChangeLog: * binutils-all/update-1.s: New file. * binutils-all/update-2.s: New file. * binutils-all/update-3.s: New file. * binutils-all/update-4.s: New file. * binutils-all/update-section.exp: New file. |
||
|
Alan Modra
|
b90efa5b79 | ChangeLog rotatation and copyright year update | ||
|
Nick Clifton
|
7fac9594c4 |
In response to a public outcry the strings program now defaults to using the
--all option which displays text from anywhere in the input file(s). The default used to be --data, which only displays text from loadable data sections, but this requires the use of the BFD library. Since the BFD library almost certainly still contains buffer overrun and/or memory corruption bugs, and since the strings program is often used to examine malicious code, it was decided that the --data option option represents a possible security risk. * strings.c: Add new command line option --data to only scan the initialized, loadable data secions of binaries. Choose the default behaviour of --all or --data based upon a configure option. * doc/binutils.texi (strings): Update documentation. Include description of why the --data option might be unsafe. * configure.ac: Add new option --disable-default-strings-all which restores the old behaviour of strings using --data by default. If the option is not used make strings use --all by default. * NEWS: Mention the new behaviour of strings. * configure: Regenerate. * config.in: Regenerate. |
||
|
Tristan Gingold
|
c50415e24c |
Add NEWS markers for 2.25.
binutils/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. gas/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. ld/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. |
||
|
Erik Akermann
|
334ac421ef |
This adds the ability to the strings program to display strings that contain \n and \r characters.
* strings.c: Add -w/--include-all-whitespace option to include any whitespace character in the displayed strings. * NEWS: Mention the new feature. * doc/binutils.texi (strings): Document the new command line option. |
||
|
Alan Modra
|
4b95cf5c0c | Update copyright years | ||
|
Nick Clifton
|
bbad633bb8 |
* objcopy.c (dump_sections): New list.
(command_line_switch): Add OPTION_DUMP_SECTION. (copy_options): Add dump-section. (copy_usage): Document new option. (copy_object): Dump requested sections. (copy_main): Handle --dump-section. * doc/binutils.texi: Document --dump-section option. * NEWS: Mention new feature. |
||
|
Kuan-Lin Chen
|
35c081572f |
Add support for Andes NDS32:
BFD: * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32 files. * Makefile.in: Regenerate. * archures.c (bfd_nds32_arch): Add nds32 target. * bfd-in2.h: Regenerate. * config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec and bfd_elf32_nds32belin_vec. (nds32*be-*-linux*): Likewise. (nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec. (nds32*be-*-*): Likewise. * configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. * configure: Regenerate. * cpu-nds32.c: New file for nds32. * elf-bfd.h: Add NDS32_ELF_DATA. * elf32-nds32.c: New file for nds32. * elf32-nds32.h: New file for nds32. * libbfd.h: Regenerate. * reloc.c: Add relocations for nds32. * targets.c (bfd_elf32_nds32be_vec): New declaration for nds32. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. BINUTILS: * readelf.c: Include elf/nds32.h (guess_is_rela): Add case for EM_NDS32. (dump_relocations): Add case for EM_NDS32. (decode_NDS32_machine_flags): New. (get_machine_flags): Add case for EM_NDS32. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (process_nds32_specific): New. (process_arch_specific): Add case for EM_NDS32. * NEWS: Announce Andes nds32 support. * MAINTAINERS: Add nds32 maintainers. TESTSUITE: * binutils-all/objdump.exp: Add NDS32 cpu. * binutils-all/readelf.r: Skip extra reloc created by NDS32. GAS: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c. (TARGET_CPU_HFILES): Add config/tc-nds32.h. * Makefile.in: Regenerate. * configure.in (nds32): Add nds32 target extension config support. * configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*. * configure: Regenerate. * config/tc-nds32.c: New file for nds32. * config/tc-nds32.h: New file for nds32. * doc/Makefile.am (CPU_DOCS): Add c-nds32.texi. * doc/Makefile.in: Regenerate. * doc/as.texinfo: Add nds32 options. * doc/all.texi: Set NDS32. * doc/c-nds32.texi: New file dor nds32 document. * NEWS: Announce Andes nds32 support. TESTSUITE: * gas/all/gas.exp: Add expected failures for NDS32. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Use alternate test. * gas/macros/irp.d: Skip for NDS32. * gas/macros/macros.exp: Skip some tests for the NDS32. * gas/macros/rept.d: Skip for NDS32. * gas/macros/test3.d: Skip for NDS32. * gas/nds32: New directory. * gas/nds32/alu-1.s: New test. * gas/nds32/alu-1.d: Likewise. * gas/nds32/alu-2.s: Likewise. * gas/nds32/alu-2.d: Likewise. * gas/nds32/br-1.d: Likewise. * gas/nds32/br-1.s: Likewise. * gas/nds32/br-2.d: Likewise. * gas/nds32/br-2.s: Likewise. * gas/nds32/ji-jr.d: Likewise. * gas/nds32/ji-jr.s: Likewise. * gas/nds32/ls.d: Likewise. * gas/nds32/ls.s: Likewise. * gas/nds32/lsi.d: Likewise. * gas/nds32/lsi.s: Likewise. * gas/nds32/to-16bit-v1.d: Likewise. * gas/nds32/to-16bit-v1.s: Likewise. * gas/nds32/to-16bit-v2.d: Likewise. * gas/nds32/to-16bit-v2.s: Likewise. * gas/nds32/to-16bit-v3.d: Likewise. * gas/nds32/to-16bit-v3.s: Likewise. * gas/nds32/nds32.exp: New test driver. LD: * Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target. * Makefile.in: Regenerate. * configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*, nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*. * emulparams/nds32belf.sh: New file for nds32. * emulparams/nds32belf_linux.sh: Likewise. * emulparams/nds32belf16m.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emultempl/nds32elf.em: Likewise. * scripttempl/nds32elf.sc}: Likewise. * gen-doc.texi: Set NDS32. * ld.texinfo: Set NDS32. * NEWS: Announce Andes nds32 support. TESTSUITE: * lib/ld-lib.exp: Add NDS32 to list of targets that do not support shared library generation. * ld-nds32: New directory. * ld-nds32/branch.d: New test. * ld-nds32/branch.ld: New test. * ld-nds32/branch.s: New test. * ld-nds32/diff.d: New test. * ld-nds32/diff.ld: New test. * ld-nds32/diff.s: New test. * ld-nds32/gp.d: New test. * ld-nds32/gp.ld: New test. * ld-nds32/gp.s: New test. * ld-nds32/imm.d: New test. * ld-nds32/imm.ld: New test. * ld-nds32/imm.s: New test. * ld-nds32/imm_symbol.s: New test. * ld-nds32/relax_jmp.d: New test. * ld-nds32/relax_jmp.ld: New test. * ld-nds32/relax_jmp.s: New test. * ld-nds32/relax_load_store.d: New test. * ld-nds32/relax_load_store.ld: New test. * ld-nds32/relax_load_store.s: New test. * ld-nds32/nds32.exp: New file. OPCODES: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c and nds32-dis.c. * Makefile.in: Regenerate. * configure.in: Add case for bfd_nds32_arch. * configure: Regenerate. * disassemble.c (ARCH_nds32): Define. * nds32-asm.c: New file for nds32. * nds32-asm.h: New file for nds32. * nds32-dis.c: New file for nds32. * nds32-opc.h: New file for nds32. INCLUDE: * dis-asm.h (print_insn_nds32): Add nds32 target. * elf/nds32.h: New file for nds32. * opcode/nds32.h: New file for nds32. |
||
|
Tristan Gingold
|
58ca03a25d |
binutils/
2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. gas/ 2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. ld/ 2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. |
||
|
Nick Clifton
|
2e62b7218b |
PR binutils/15033
* objcopy.c (enum change_action): Delete. (struct section_list): Delete remove, copy, change_vma, change_lma and set_flags fields. Add context field. (find_section_list): Add a context parameter. Add support for wildcard characters in section names. (is_strip_section): Check for sections being both copied and removed. (copy_object): Pass context to find_section_list. (setup_section): Likewise. (copy_section): Likewise. (copy_main): Likewise. * doc/binutils: Document the new behaviour. * NEWS: Mention the new feature |
||
|
Sandra Loosemore
|
36591ba149 |
2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
Andrew Jenner <andrew@codesourcery.com> Based on patches from Altera Corporation. bfd/ * Makefile.am (ALL_MACHINES): Add cpu-nios2.lo. (ALL_MACHINES_CFILES): Add cpu-nios2.c. (BFD_BACKENDS): Add elf32-nios2.lo. (BFD32_BACKENDS_CFILES): Add elf32-nios2.c. * Makefile.in: Regenerated. * configure.in: Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * configure: Regenerated. * config.bfd: Add cases for nios2. * archures.c (enum bfd_architecture): Add bfd_arch_nios2. (bfd_mach_nios2): Define. (bfd_nios2_arch): Declare. (bfd_archures_list): Add bfd_nios2_arch. * targets.c (bfd_elf32_bignios2_vec): Declare. (bfd_elf32_littlenios2_vec): Declare. (_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA. * reloc.c (enum bfd_reloc_code_real): Add Nios II relocations. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * cpu-nios2.c: New file. * elf32-nios2.c: New file. opcodes/ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and nios2-opc.c. * Makefile.in: Regenerated. * configure.in: Add case for bfd_nios2_arch. * configure: Regenerated. * disassemble.c (ARCH_nios2): Define. (disassembler): Add case for bfd_arch_nios2. * nios2-dis.c: New file. * nios2-opc.c: New file. include/ * dis-asm.h (print_insn_big_nios2): Declare. (print_insn_little_nios2): Declare. include/elf * nios2.h: New file. include/opcode/ * nios2.h: New file. gas/ * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c. (TARGET_CPU_HFILES): Add config/tc-nios2.h. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-linux*. * config/obj-elf.c: Conditionally include elf/nios2.h. * config/tc-nios2.c: New file. * config/tc-nios2.h: New file. * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set NIOSII. * doc/as.texinfo (Overview): Add Nios II options. (Machine Dependencies): Include c-nios2.texi. * doc/c-nios2.texi: New file. * NEWS: Note Altera Nios II support. gas/testsuite/ * gas/nios2/add.d: New. * gas/nios2/add.s: New. * gas/nios2/align_fill.d: New. * gas/nios2/align_fill.s: New. * gas/nios2/align_text.d: New. * gas/nios2/align_text.s: New. * gas/nios2/and.d: New. * gas/nios2/and.s: New. * gas/nios2/branch.d: New. * gas/nios2/branch.s: New. * gas/nios2/break.d: New. * gas/nios2/break.s: New. * gas/nios2/bret.d: New. * gas/nios2/bret.s: New. * gas/nios2/cache.d: New. * gas/nios2/cache.s: New. * gas/nios2/call26.d: New. * gas/nios2/call26.s: New. * gas/nios2/call.d: New. * gas/nios2/call.s: New. * gas/nios2/cmp.d: New. * gas/nios2/cmp.s: New. * gas/nios2/comments.d: New. * gas/nios2/comments.s: New. * gas/nios2/complex.d: New. * gas/nios2/complex.s: New. * gas/nios2/ctl.d: New. * gas/nios2/ctl.s: New. * gas/nios2/custom.d: New. * gas/nios2/custom.s: New. * gas/nios2/etbt.d: New. * gas/nios2/etbt.s: New. * gas/nios2/flushda.d: New. * gas/nios2/flushda.s: New. * gas/nios2/illegal.l: New. * gas/nios2/illegal.s: New. * gas/nios2/jmp.d: New. * gas/nios2/jmp.s: New. * gas/nios2/ldb.d: New. * gas/nios2/ldb.s: New. * gas/nios2/ldh.d: New. * gas/nios2/ldh.s: New. * gas/nios2/ldw.d: New. * gas/nios2/ldw.s: New. * gas/nios2/lineseparator.d: New. * gas/nios2/lineseparator.s: New. * gas/nios2/mov.d: New. * gas/nios2/movia.d: New. * gas/nios2/movia.s: New. * gas/nios2/movi.d: New. * gas/nios2/movi.s: New. * gas/nios2/mov.s: New. * gas/nios2/mul.d: New. * gas/nios2/mul.s: New. * gas/nios2/nios2.exp: New. * gas/nios2/nor.d: New. * gas/nios2/nor.s: New. * gas/nios2/or.d: New. * gas/nios2/or.s: New. * gas/nios2/ret.d: New. * gas/nios2/ret.s: New. * gas/nios2/rol.d: New. * gas/nios2/rol.s: New. * gas/nios2/rotate.d: New. * gas/nios2/rotate.s: New. * gas/nios2/stb.d: New. * gas/nios2/stb.s: New. * gas/nios2/sth.d: New. * gas/nios2/sth.s: New. * gas/nios2/stw.d: New. * gas/nios2/stw.s: New. * gas/nios2/sub.d: New. * gas/nios2/sub.s: New. * gas/nios2/sync.d: New. * gas/nios2/sync.s: New. * gas/nios2/trap.d: New. * gas/nios2/trap.s: New. * gas/nios2/tret.d: New. * gas/nios2/tret.s: New. * gas/nios2/warn_noat.l: New. * gas/nios2/warn_noat.s: New. * gas/nios2/warn_nobreak.l: New. * gas/nios2/warn_nobreak.s: New. * gas/nios2/xor.d: New. * gas/nios2/xor.s: New. ld/ * Makefile.am (enios2elf.c): New rule. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-*-*. * emulparams/nios2elf.sh: New file. * NEWS: Note Altera Nios II support. ld/testsuite/ * ld-nios2/emit-relocs-1a.s: New. * ld-nios2/emit-relocs-1b.s: New. * ld-nios2/emit-relocs-1.d: New. * ld-nios2/emit-relocs-1.ld: New. * ld-nios2/gprel.d: New. * ld-nios2/gprel.s: New. * ld-nios2/hilo16.d: New. * ld-nios2/hilo16.s: New. * ld-nios2/hilo16_symbol.s: New. * ld-nios2/imm5.d: New. * ld-nios2/imm5.s: New. * ld-nios2/imm5_symbol.s: New. * ld-nios2/nios2.exp: New. * ld-nios2/pcrel16.d: New. * ld-nios2/pcrel16_label.s: New. * ld-nios2/pcrel16.s: New. * ld-nios2/relax_callr.d: New. * ld-nios2/relax_callr.ld: New. * ld-nios2/relax_callr.s: New. * ld-nios2/relax_cjmp.d: New. * ld-nios2/relax_cjmp.s: New. * ld-nios2/relax_jmp.ld: New. * ld-nios2/relax_section.d: New. * ld-nios2/relax_section.s: New. * ld-nios2/relax_ujmp.d: New. * ld-nios2/relax_ujmp.s: New. * ld-nios2/reloc.d: New. * ld-nios2/reloc.s: New. * ld-nios2/reloc_symbol.s: New. * ld-nios2/s16.d: New. * ld-nios2/s16.s: New. * ld-nios2/s16_symbol.s: New. * ld-nios2/u16.d: New. * ld-nios2/u16.s: New. * ld-nios2/u16_symbol.s: New. * ld-elf/indirect.exp: Skip on targets that don't support -shared -fPIC. * ld-elfcomm/elfcomm.exp: Build with -G0 for nios2. * ld-plugin/lto.exp: Skip shared library tests on targets that don't support them. Skip execution tests on non-native targets. binutils/ * readelf.c: Include elf/nios2.h. (dump_relocations): Add case for EM_ALTERA_NIOS2. (get_nios2_dynamic_type): New. (get_dynamic_type): Add case for EM_ALTERA_NIOS2. (is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases. * NEWS: Note Altera Nios II support. * MAINTAINERS: Add Nios II maintainers. |
||
|
Nick Clifton
|
5bf135a788 | Add copyright notices | ||
|
Tristan Gingold
|
af18cb5940 |
binutils/
2012-07-27 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.23. gas/ 2012-07-27 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.23. ld/ 2012-07-27 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.23. |
||
|
James Lemke
|
b9c361e0ad |
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
|
||
|
Kai Tietz
|
9a30f23643 |
PR binutils/13682
* NEWS: Mention new feature. * dlltool.c (i386_x64_dljtab): New stub-code for x64 delayed-load feature. (i386_x64_trampoline): New trampoline-code for x64 delayed-load feature. (make_one_lib_file): Add support for x64 delayed-load feature. (make_delay_head): Likewis |
||
|
DJ Delorie
|
99c513f6ac |
[.]
* configure.ac (rl78-*-*) New case. * configure: Regenerate. [bfd] * Makefile.am (ALL_MACHINES): Add cpu-rl78.lo. (ALL_MACHINES_CFILES): Add cpu-rl78.c. (BFD32_BACKENDS): Add elf32-rl78.lo. (BFD32_BACKENDS_CFILES): Add elf32-rl78.c. (Makefile.in): Regenerate. * archures.c (bfd_architecture): Define bfd_arch_rl78. (bfd_archures_list): Add bfd_rl78_arch. * config.bfd: Add rl78-*-elf. * configure.in: Add bfd_elf32_rl78_vec. * reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations. * targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rl78.c: New file. * elf32-rl78.c: New file. [binutils] * readelf.c: Include elf/rl78.h (guess_is_rela): Handle EM_RL78. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. * NEWS: Mention addition of RL78 support. * MAINTAINERS: Add myself as RL78 port maintainer. [gas] * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c. (TARGET_CPU_HFILES): Add rc-rl78.h. (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y. (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules. * Makefile.in: Regenerate. * configure.in: Add rl78 case. * configure: Regenerate. * configure.tgt: Add rl78 case. * config/rl78-defs.h: New file. * config/rl78-parse.y: New file. * config/tc-rl78.c: New file. * config/tc-rl78.h: New file. * NEWS: Add Renesas RL78. * doc/Makefile.am (c-rl78.texi): New. * doc/Makefile.in: Likewise. * doc/all.texi: Enable it. * doc/as.texi: Add it. [include] * dis-asm.h (print_insn_rl78): Declare. [include/elf] * common.h (EM_RL78, EM_78K0R): New. * rl78.h: New. [include/opcode] * rl78.h: New file. [ld] * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c. (+eelf32rl78.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Add rl78-*-* case. * emulparams/elf32rl78.sh: New file. * NEWS: Mention addition of Renesas RL78 support. [opcodes] * Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and rl78-dis.c. (MAINTAINERCLEANFILES): Add rl78-decode.c. (rl78-decode.c): New rule, built from rl78-decode.opc and opc2c. * Makefile.in: Regenerate. * configure.in: Add bfd_rl78_arch case. * configure: Regenerate. * disassemble.c: Define ARCH_rl78. (disassembler): Add ARCH_rl78 case. * rl78-decode.c: New file. * rl78-decode.opc: New file. * rl78-dis.c: New file. |
||
|
Walter Lee
|
69f56ae1d3 |
Mention Tilera support in binutils/NEWS, and fix the TILEPro
capitalization in gas/NEWs and ld/NEWS. |
||
|
Tristan Gingold
|
a7142d9403 |
binutils/
2011-09-22 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.22. gas/ 2011-09-22 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.22. ld/ 2011-09-22 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.22. |
||
|
Jakub Jelinek
|
4ccf1e317a |
* dwarf2.c (dwarf_debug_sections): Add .debug_macro
and .zdebug_macro entry. (dwarf_debug_section_enum): Add debug_macro. * NEWS: Mention .debug_macro support. * dwarf.c (read_and_display_attr_value): Don't print a tab if attribute is 0. (get_AT_name): Handle DW_AT_GNU_macros. (get_line_filename_and_dirname, display_debug_macro): New functions. (debug_displays): Add an entry for .debug_macro and .zdebug_macro. * readelf.c (process_section_headers): With do_debug_macinfo handle also .debug_macro sections. * dwarf.h (dwarf_section_display_enum): Add macro. |
||
|
Tom Tromey
|
fd2f003344 |
* NEWS: Add note about --dwarf-depth, --dwarf-start, and
dwarf-mode.el. * objdump.c (suppress_bfd_header): New global. (usage): Update. (OPTION_DWARF_DEPTH, OPTION_DWARF_START): New constants. (options): Add dwarf-depth and dwarf-start entries. (dump_bfd): Use suppress_bfd_header. (main): Handle OPTION_DWARF_START, OPTION_DWARF_DEPTH. * doc/binutils.texi (objcopy): Document --dwarf-depth and --dwarf-start. (readelf): Likewise. * dwarf-mode.el: New file. * dwarf.c (dwarf_cutoff_level, dwarf_start_die): New globals. (read_and_display_attr_value): Also check debug_info_p. (process_debug_info): Handle dwarf_start_die and dwarf_cutoff_level. * dwarf.h (dwarf_cutoff_level, dwarf_start_die): Declare. * readelf.c (usage): Update. (OPTION_DWARF_DEPTH): New macro. (OPTION_DWARF_START): Likewise. (options): Add dwarf-depth and dwarf-start entries. (parse_args): Handle OPTION_DWARF_START and OPTION_DWARF_DEPTH. testsuite * binutils-all/objdump.W: Correct output. |
||
|
Nick Clifton
|
ec25acb399 |
* windres.c (usage): Add new --preprocessor-arg option.
(option_values): Add new OPTION_PREPROCESSOR_ARG enumerator. (option long_options): Add preprocessor-arg option. (main): Handle it. * doc/binutils.texi: Add documentation for --preprocessor-arg option. * NEWS: Add line about new --preprocessor-arg option for windres. * binutils-all/windres/windres.exp: Add '// cpparg <option>' command to rc file interpretation to specify addition pre-processor commands as script option. * binutils-all/windres/strtab3.rc: New. * binutils-all/windres/strtab3.rsd: New. * binutils-all/windres/README: Add note about cpparg script option. argument |