While address overrides are ignored in 64-bit mode (and hence shouldn't
really result in an error, but upon v1 converting this to a warning I
was told otherwise), trying to use 16-bit addressing is documented to
result in #UD, and hence the assembler should reject the attempt. (The
added test case at once also checks that bndc{l,n,u} won't accept
16-bit register operands.)
... due to their last byte looking like a suffix, when after its
stripping a matching instruction can be found. Since memory operand
size specifiers in Intel mode get converted into suffix representation
internally, we need to keep track of the actual mnemonic suffix which
may have got trimmed off, and check its validity while looking for a
matching template. I tripper over this quite some time again after
support for AMD's SSE5 instructions got removed, as at that point some
of the SSE5 mnemonics, other than expected, didn't fail to assemble.
But the problem affects many more instructions, namely (almost) all
MMX, SSE, and AVX ones as it looks. I don't think it makes sense to
add a testcase covering all of them, nor do I think it makes sense to
pick out some random examples for a new test case.
... just like is already the case for 16- and 32-bit movzb: I can't see
why omitting suffixes on this (and movs{b,w,l}) is not allowed, when it
is allowed for all other instructions where the suffix is redundant
with (one of) the operands.
The dual purpose mnemonic (string move vs scalar double move) breaks
the assumption that the isstring flag would be set on both the first
and last entry in the current set of templates, which results in bogus
or missing diagnostics for the string move variant of the mnemonic.
Short of mostly rewriting i386_index_check() and its interaction with
the rest of the code, simply shrink the template set to just string
instructions when encountering the second memory operand, and run
i386_index_check() a second time for the first memory operand after
that reduction.
Fix an assertion failure like:
test.s: Assembler messages:
test.s:3: Internal error!
Assertion failure in append_insn at .../gas/config/tc-mips.c:7523.
Please report this bug.
triggered by assembling MIPS16 code like:
hello:
addiu $4, $4, 4
jr $31
with the generation of a listing file enabled, e.g.:
$ as -mips16 -O2 -aln=test.lst
The cause of the problem is the lack of support for moving instructions
across frags in MIPS16 jump swapping, which triggers more easily with
listing enabled as in that case every instruction gets placed in its own
frag. It would trigger even with listing disabled though if the
instruction to swap a MIPS16 jump with was unfortunately enough placed
as last in a frag that became full.
This scenario is already handled correctly with branch swapping in
regular MIPS and microMIPS code, so reuse it for MIPS16 code as well,
and now that all MIPS16 handling has become the same as the regular MIPS
and microMIPS cases remove MIPS16 special casing altogether.
This effectively complements:
commit 464ab0e55a
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Aug 6 20:33:00 2012 +0000
<https://sourceware.org/ml/binutils/2012-08/msg00043.html>, ("MIPS/GAS:
Correct microMIPS branch swapping assertion") for the MIPS16 case.
The assertion itself was introduced with:
commit 1e91584932
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Wed Mar 9 09:17:02 2005 +0000
<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]"), but its introduction
merely noted our existing lack of support for MIPS16 jump swapping
across frags.
gas/
* config/tc-mips.c (append_insn) <APPEND_SWAP>: Do not special
case MIPS16 handling.
* testsuite/gas/mips/branch-swap-3.d: New test.
* testsuite/gas/mips/branch-swap-4.d: New test.
* testsuite/gas/mips/mips16@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16@branch-swap-4.d: New test.
* testsuite/gas/mips/micromips@branch-swap-3.d: New test.
* testsuite/gas/mips/micromips@branch-swap-4.d: New test.
* testsuite/gas/mips/branch-swap-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Correct a regression from commit 85024cd8bc ("Run write_object_file
after errors") causing unsuccessful assembly, which may be due to any
reason, such as supplying a valid source like this:
.text
.byte 0
.err
to terminate with an assertion failure like:
test.s: Assembler messages:
test.s:3: Error: .err encountered
../as-new: BFD (GNU Binutils) 2.24.51.20140628 internal error, aborting at .../gas/write.c line 608 in size_seg
../as-new: Please report this bug.
on targets whose default text section alignment is above 0, typically
RISC machines.
This is due to an attempt to set last text section's frag alignment to
0, requested from `subsegs_finish_section' where `frag_align_code
(alignment, 0)' is called with `alignment' set to 0 rather than the
section alignment if `had_errors' has returned true. The call to
`subsegs_finish_section' is made from `subsegs_finish' from
`write_object_file' at unsuccessful completion, which previously wasn't
made.
Always set last section's frag alignment from the section alignment
then, forcing no section padding instead if completing unsuccessfully,
so that in that case alignment padding is still suppressed from any
listing generated, fixing assertion failures for these targets:
alpha-linuxecoff -FAIL: all pr20312
arm-aout -FAIL: all pr20312
mips-freebsd -FAIL: all pr20312
mips-img-linux -FAIL: all pr20312
mips-linux -FAIL: all pr20312
mips-mti-linux -FAIL: all pr20312
mips-netbsd -FAIL: all pr20312
mips-sgi-irix5 -FAIL: all pr20312
mips-sgi-irix6 -FAIL: all pr20312
mips-vxworks -FAIL: all pr20312
mips64-freebsd -FAIL: all pr20312
mips64-img-linux -FAIL: all pr20312
mips64-linux -FAIL: all pr20312
mips64-mti-linux -FAIL: all pr20312
mips64-openbsd -FAIL: all pr20312
mips64el-freebsd -FAIL: all pr20312
mips64el-img-linux -FAIL: all pr20312
mips64el-linux -FAIL: all pr20312
mips64el-mti-linux -FAIL: all pr20312
mips64el-openbsd -FAIL: all pr20312
mipsel-freebsd -FAIL: all pr20312
mipsel-img-linux -FAIL: all pr20312
mipsel-linux -FAIL: all pr20312
mipsel-mti-linux -FAIL: all pr20312
mipsel-netbsd -FAIL: all pr20312
mipsel-vxworks -FAIL: all pr20312
mipsisa32-linux -FAIL: all pr20312
mipsisa32el-linux -FAIL: all pr20312
mipsisa64-linux -FAIL: all pr20312
mipsisa64el-linux -FAIL: all pr20312
sh-pe -FAIL: all pr20312
sparc-aout -FAIL: all pr20312
gas/
PR gas/20312
* write.c (subsegs_finish_section): Force no section padding to
alignment on failed assembly, always set last frag's alignment
from section.
* testsuite/gas/all/pr20312.l: New list test.
* testsuite/gas/all/pr20312.s: New test source.
* testsuite/gas/all/gas.exp: Run the new test
GAS fails to recognize march=armv8.2-a as a superset of march=armv8.1-a
when assembling NEON instructions. The patch corrects this, making
-march=armv8.2-a -mfpu=neon-fp-armv8 enable the NEON intructions
introduced with ARMv8.1-A.
include/
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
* opcode/arm.h (ARM_ARCH_V8_2a): Add FPU_NEON_EXT_RDMA to the set
of enabled FPU features.
gas/
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/arm/armv8_2+rdma.d: New.
Complement commit a43942db49 ("LD/ELF: Unify STB_GNU_UNIQUE handling")
and use `supports_gnu_unique' with the `unique_symbol' and `type' tests,
fixing failures like:
.../binutils/testsuite/binutils-all/unique.s: Assembler messages:
.../binutils/testsuite/binutils-all/unique.s:2: Error: symbol type "gnu_unique_object" is supported only by GNU targets
ERROR: .../binutils/testsuite/binutils-all/unique.s: assembly failed
UNRESOLVED: ar unique symbol in archive
.../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o
Executing on host: .../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o (timeout = 300)
.../binutils/ar: tmpdir/unique.o: No such file or directory
FAIL: ar unique symbol in archive
and:
.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg
../as-new: Please report this bug.
.../gas/testsuite/../../binutils/readelf -s dump.o | grep "1 *\[FIONTCU\]" > dump.out
Executing on host: sh -c {.../gas/testsuite/../../binutils/readelf -s dump.o >readelf.out 2>gas.stderr} /dev/null (timeout = 300)
readelf: Error: dump.o: Failed to read file's magic number
FAIL: elf type list
on MIPS/FreeBSD targets:
mips-freebsd -FAIL: ar unique symbol in archive
mips-freebsd -FAIL: elf type list
mips64-freebsd -FAIL: ar unique symbol in archive
mips64-freebsd -FAIL: elf type list
mips64el-freebsd -FAIL: ar unique symbol in archive
mips64el-freebsd -FAIL: elf type list
mipsel-freebsd -FAIL: ar unique symbol in archive
mipsel-freebsd -FAIL: elf type list
binutils/
* testsuite/binutils-all/ar.exp: Use `supports_gnu_unique' with
the `unique_symbol' test.
gas/
* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
`type' test.
aarch64_opnd_info used bitfields to hold vector element indices,
but values were stored into those bitfields before their ranges had
been checked. This meant large invalid indices could be silently
truncated to smaller valid indices.
The two obvious fixes were to do the range checking earlier or use
a full 64-bit field for the index. I went for the latter for two
reasons:
- Doing the range checking in operand_general_constraint_met_p
seems structurally cleaner than doing it while parsing.
- The bitfields didn't really buy us anything. The imm field
of the union is already 128 bits, so we can use a full int64_t
index without growing the structure.
The patch also adds missing range checks for the elements in a register
list index.
include/
* opcode/aarch64.h (aarch64_opnd_info): Change index fields to int64_t.
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Check the
range of ldst_elemlist operands.
(print_register_list): Use PRIi64 to print the index.
(aarch64_print_operand): Likewise.
gas/
* testsuite/gas/aarch64/diagnostic.s,
testsuite/gas/aarch64/diagnostic.l: Add tests for out-of-range indices.
* config//tc-arc.c (tc_arc_frame_initial_instructions): Use
cfi_add_CFA_def_cfa to generate default CFA with offset
* testsuite/gas/cfi/cfi-arc-1.d: Update expected output.
PR gas/20247
* as.h (do_not_pad_sections_to_alignment): New global variable.
* as.c (show_usage): Add --no-pad-sections.
(parse_args): Likewise.
* write.c (size_seg): Skip padding the end of the section if
requested from the command line.
(SUB_SEGMENT_ALIGN): Likewise.
* doc/as.texinfo: Document the new option.
* NEWS: Mention the new feature.
* testsuite/gas/elf/section11.s: New test.
* testsuite/gas/elf/section11.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
Correct a MIPS16 relocation handling regression in GAS introduced with:
commit 177b4a6ad0
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Mon Mar 18 18:56:18 2002 +0000
discussed at <https://sourceware.org/ml/binutils/2002-03/msg00345.html>,
which removed a preparatory call to `mips16_extended_frag' previously
made from `md_estimate_size_before_relax'. As a result the function is
never called with its `sec' parameter non-NULL and consequently all the
unsupported relocation checks within are dead and never trigger, causing
any unhandled relocations to silently resolve to 0. Unfortunately there
was no sufficient test suite coverage back then to catch this.
Remove all dead code then, and all the associated comments. Update the
remaining call to `mips16_extended_frag' from `mips_relax_frag' to pass
the relocation section as the `sec' parameter and use it to mark frags
which require an external relocation, as extended. Finally handle any
outstanding MIPS16 relocations in `md_convert_frag' and report an error
since we don't support any except with percent operators.
gas/
* config/tc-mips.c (append_insn): Use any `O_symbol' expression
unchanged with relaxed MIPS16 instructions.
(mips16_extended_frag): Adjust accordingly. Return 1 right
away if a relocation will be required for the symbol requested.
Remove dead first relaxation pass code.
(mips_relax_frag): Pass `sec' down to `mips16_extended_frag'.
(md_convert_frag): Adjust symbol value calculation. Raise an
error if a relocation is required for the symbol requested.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove dump patterns,
add error output.
* testsuite/gas/mips/mips16@relax-swap3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-0.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-1.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-2.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-3.d: New test.
* testsuite/gas/mips/mips16-branch-addend-0.d: New test.
* testsuite/gas/mips/mips16-branch-addend-1.d: New test.
* testsuite/gas/mips/mips16-branch-addend-2.d: New test.
* testsuite/gas/mips/mips16-branch-addend-3.d: New test.
* testsuite/gas/mips/mips16-branch-absolute.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-0.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-1.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-2.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-absolute.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-2.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-3.l: New error output.
* testsuite/gas/mips/mips16-branch-absolute.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-relax-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-0.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-1.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-2.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-3.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Keep original microMIPS symbols in references from branch relocations so
that the ISA bit is retained and can be verified for validity in static
link. No need to update WRT MIPS16 symbols because we keep them all
anyway for other reasons.
gas/
* config/tc-mips.c (b_reloc_p): New function.
(mips_fix_adjustable): Also keep the original microMIPS symbol
referred from branch relocations.
* testsuite/gas/mips/branch-local-1.d: New test.
* testsuite/gas/mips/branch-local-n32-1.d: New test.
* testsuite/gas/mips/branch-local-n64-1.d: New test.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Update
relocations.
* testsuite/gas/mips/branch-local-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new cases.
Complement commit 7361da2c95 ("Add support for MIPS R6.") and fix
internal errors like:
foo.s: Assembler messages:
foo.s: Internal error!
Assertion failure in md_apply_fix at .../gas/config/tc-mips.c:15028.
Please report this bug.
triggered by resolved R6 PC-relative relocations in sources containing
R6 code fragments wrapped into ISA override blocks embedded within code
otherwise assembled for an older ISA.
gas/
* config/tc-mips.c (calculate_reloc) <BFD_RELOC_HI16_S_PCREL>
<BFD_RELOC_LO16_PCREL>: New switch cases.
(md_apply_fix) <BFD_RELOC_HI16_S_PCREL, BFD_RELOC_LO16_PCREL>:
Move switch cases along `BFD_RELOC_MIPS_JMP'.
<BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2>
<BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2>: Handle
the resolved case.
* testsuite/gas/mips/pcrel-reloc-4.d: New test.
* testsuite/gas/mips/pcrel-reloc-4-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-5.d: New test.
* testsuite/gas/mips/pcrel-reloc-5-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.l: New list test.
* testsuite/gas/mips/pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Use the module level ISA setting rather than the last ISA selected with
a `.set' directive in the source file in determination as to whether to
keep PC-relative relocations and then with the original symbol referred,
for the purpose of R6 linker relaxation.
This is so that with e.g. code like this:
b foo
.set mips32r2
...
it's the command line options or any `.module' directive that decides
how to encode any relocation for `foo' rather than the presence of `.set
mips32r2'.
gas/
* config/tc-mips.c (mips_force_relocation): Use `file_mips_opts'
rather than `mips_opts' for the R6 ISA check.
(mips_fix_adjustable): Likewise.
* testsuite/gas/mips/pcrel-reloc-1.d: New test.
* testsuite/gas/mips/pcrel-reloc-1-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-2.d: New test.
* testsuite/gas/mips/pcrel-reloc-2-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-3.d: New test.
* testsuite/gas/mips/pcrel-reloc-3-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch fixes and expands the definition of the read/write
instructions for ancillary-state, privileged and hyperprivileged
registers in opcodes.
It also adds support for three new v9m hyperprivileged registers:
%hmcdper, %hmcddfr and %hva_mask_nz.
Finally, the patch expands existing tests (and adds several new ones) in
order to cover all the read/write instructions in all its variants.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (rdasr): New macro.
(wrasr): Likewise.
(rdpr): Likewise.
(wrpr): Likewise.
(rdhpr): Likewise.
(wrhpr): Likewise.
(sparc_opcodes): Use the macros above to fix and expand the
definition of read/write instructions from/to
asr/privileged/hyperprivileged instructions.
* sparc-dis.c (v9_hpriv_reg_names): Add %hmcdper, %hmcddfr and
%hva_mask_nz. Prefer softint_set and softint_clear over
set_softint and clear_softint.
(print_insn_sparc): Support %ver in Rd.
gas/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (hpriv_reg_table): Add registers %hmcdper,
%hmcddfr and %hva_mask_nz.
(sparc_ip): New handling of asr/privileged/hyperprivileged
registers, adapted to the new form of the sparc opcodes table.
* testsuite/gas/sparc/rdasr.s: New file.
* testsuite/gas/sparc/rdasr.d: Likewise.
* testsuite/gas/sparc/wrasr.s: Likewise.
* testsuite/gas/sparc/wrasr.d: Likewise.
* testsuite/gas/sparc/sparc.exp (sparc_elf_setup): Add rdasr and
wrasr tests.
* testsuite/gas/sparc/rdpr.d: Use -Av9m, as some privileged
registers require it.
* testsuite/gas/sparc/wrpr.s: Complete to cover all privileged
registers and write instruction modalities.
* testsuite/gas/sparc/wrpr.d: Likewise.
* testsuite/gas/sparc/rdhpr.s: Likewise for hyperprivileged
registers.
* testsuite/gas/sparc/rdhpr.d: Likewise.
* testsuite/gas/sparc/wrhpr.s: Likewise.
* testsuite/gas/sparc/wrhpr.d: Likewise.
This patch marks the SPARC instructions in the opcodes table with their
proper opcode architectures, and makes the assembler aware of them.
This allows the assembler to properly realize when a new instruction
needs a higher architecture (after v9b) and to react accordingly
emitting an error message or bumping the architecture.
It also expands architecture mismatch tests to cover architectures
higher than v9b, and fixes a couple of minor bugs in the GAS testsuite.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc_opcodes): Adjust instructions opcode
architecture according to the hardware capabilities they require.
(sparc_priv_regs): New table.
(sparc_hpriv_regs): Likewise.
(sparc_asr_regs): Likewise.
(v9anotv9m): Define.
gas/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_arch_table): adjust the GAS
architectures to use the right opcode architecture.
(sparc_md_end): Handle v9{c,d,e,v,m}.
(sparc_ip): Fix some comments.
* testsuite/gas/sparc/ldx_efsr.d: Fix the architecture of this
instruction, which is v9d.
* testsuite/gas/sparc/mwait.s: Remove the `rd %mwait,%g1'
instruction from the test, as %mwait is not readable.
* testsuite/gas/sparc/mwait.d: Likewise.
* testsuite/gas/sparc/mism-1.s: Expand to check v9b and v9e
mismatch architecture errors.
* testsuite/gas/sparc/mism-2.s: New file.
binutils* readelf.c (is_24bit_abs_reloc): Add support for R_FT32_20
reloc.
gas * config/tc-ft32.c (md_assemble): Call dwarf2_emit_insn with the
instruction size.
* config/tc-mcore.c (md_assemble): Likewise.
* config/tc-mn10200.c (md_assemble): Likewise.
* config/tc-moxie.c (md_assemble): Likewise.
* config/tc-pj.c (md_apply_fix): Handle BFD_RELOC_PJ_CODE_REL32.
* testsuite/gas/all/gas.exp (diff1 test): Alpha sort list of
exception targets. Add alpha, hppa, microblaze and rl78 to list
of exceptions.
(forward): Add microblaze to list of exceptions.
(fwdexp): Add alpha to list of exceptions.
(redef2): Add arm-epoc-pe and rl78 to list of exceptions.
(redef3): Add rl78 and x86_64 cygwin to list of exceptions.
(do_930509a): Alpha sort list of exception targets. Add h8300 and
mn10200 to list of exceptions.
(align2): Expect to fail for nds32.
(cond): Add alpha and rl78 to list of exceptions.
* testsuite/gas/all/none.d: Skip for ft32 and hppa.
* testsuite/gas/all/string.d: Skip for tic4x.
* testsuite/gas/alpha/alpha.exp: Note that the alpha-linuxecoff
target does not support ELF.
* testsuite/gas/arm/blx-bl-convert.dL Skip for the nto target.
* testsuite/gas/cfi/cfi-alpha-2.d: All extended format names.
* testsuite/gas/cfi/cfi.exp: Alpha sort list of targets. Skip SH
tests for sh-pe and sh-rtemscoff targets.
* testsuite/gas/elf/elf.exp (redef): Add rl78, xgate and vax to
list of exceptions.
(type): Run the noifunc version for alpha-freebsd and visium.
* testsuite/gas/elf/warn-2.s: Do not expect to fail on the mcore,
mn10200 or moxie targets.
* testsuite/gas/ft32/insn.d: Update expected disassembly.
* testsuite/gas/i386/i386.exp (x86-64-pcrel): Skip for cygwin
targets.
* testsuite/gas/lns/lns.exp (lns-common-1): No longer skip for
mcore and rx targets.
* testsuite/gas/macros/macros.exp (dot): Add exceptions for ns32k,
rl78 and vax.
(purge): Expect to fail on the ns32k and vax.
* testsuite/gas/nds32/alu-2.d: Update expected disassembly.
* testsuite/gas/nds32/ls.d: Likewise.
* testsuite/gas/nds32/sys-reg.d: Likewise.
* testsuite/gas/nds32/usr-spe-reg.d: Likewise.
* testsuite/gas/pe/aligncomm-d.d: Skip for the sh.
* testsuite/gas/pe/section-align-3.d: Likewise.
* testsuite/gas/pe/section-exclude.d: Likewise.
* testsuite/gas/ppc/test2xcoff32.d: Pass once all the required
data has been seen.
* testsuite/gas/ppc/textalign-xcoff-001.d: Fix up regexp to allow
for variations in whitespace.
* testsuite/gas/tilepro/t_constants.d: Pass once all the required
data has been seen.
* testsuite/gas/tilepro/t_constants.s (.safe_word): New macro.
Installs a 32-bit value without generating warnings on 64-bit
hosts.
Use the new macro to replace the .word directives.
opcodes * nds32-dis.c (nds32_parse_audio_ext): Change printing of integer
constants to match expected behaviour.
(nds32_parse_opcode): Likewise. Also for whitespace.
The extract function used for some arc_s instructions was not
implemented, and instead always returned 0. Fixed in this commit.
opcodes/ChangeLog:
* arc-opc.c (extract_rhv1): Extract value from insn.
gas/ChangeLog:
* testsuite/gas/arc/add_s.d: New file.
* testsuite/gas/arc/add_s.s: New file.
This commit adds the ldbit instruction for the NPS-400. The ldbit
instruction uses the same encoding as the ld instruction, but sets
the ZZ field to 11 (which is a reserved setting), and sets the AA
field to 1 or 2 for the x2 and x4 flags respectively.
With the exception of ldbit, this commit adds implementations of
all DPI instructions for the NPS-400. These instructions are:
- hash / hash.p[0-3]
- tr
- utf8
- e4by
- addf
Revert an inadvertent change to make RELA JALR relocations
section-relative on MIPS R6 targets made with commit 7361da2c95 ("Add
support for MIPS R6."). There is no need to make this a special case
and the comment introduced with the said change clearly indicates this
was not intended.
gas/
* config/tc-mips.c (mips_fix_adjustable): Don't convert RELA
JALR relocations on R6.
* testsuite/gas/mips/jal-svr4pic-local.d: New test.
* testsuite/gas/mips/mips1@jal-svr4pic-local.d: New test.
* testsuite/gas/mips/r3000@jal-svr4pic-local.d: New test.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: New test.
* testsuite/gas/mips/jal-svr4pic-local-n32.d: New test.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d: New
test.
* testsuite/gas/mips/jal-svr4pic-local-n64.d: New test.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d: New
test.
* testsuite/gas/mips/jal-svr4pic-local.s: New test source.
* testsuite/gas/mips/jal-svr4pic-local-newabi.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
etc * texi2pod.pl: Escape curly braces, whilst searching for keyword
strong.
gas * config/tc-arm.c: For non-ELF based targets skip ARM feature sets
that are not supported.
* config/tc-arc.c (md_apply_fix): Avoid left shifting a signed
constant.
* config/tc-cr16.c (check_range): Likewise.
* config/tc-nios2.c (nios2_check_overflow): Likewise.
This patch adds the architecture extension "+ras" to enable RAS
support. It is enabled by default for -march=armv8.2-a and available but
disabled by default for armv8-a and armv8.1-a.
gas/
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
(arm_ext_ras): Renamed from arm_ext_v8_2.
(insns): Update for arm_ext_v8_2 renaming.
(arm_extensions): Add "ras".
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
* testsuite/gas/arm/armv8-a+ras.d: New.
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
options.
include/
* opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding
entries.
(ARM_AEXT_V8_2A): Add ARM_EXT2_RAS.
opcodes/
* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
ARM_EXT_RAS in relevant entries.
AMD64 spec and Intel64 spec differ in indirect branches in 64-bit mode.
AMD64 supports indirect branches with 16-bit address via the data size
prefix while the data size prefix is ignored by Intel64.
gas/
PR binutis/18386
* testsuite/gas/i386/i386.exp: Run x86-64-branch-4.
* testsuite/gas/i386/x86-64-branch.d: Updated.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
* testsuite/gas/i386/x86-64-branch-4.l: New file.
* testsuite/gas/i386/x86-64-branch-4.s: Likewise.
opcodes/
PR binutis/18386
* i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode.
(indir_v_mode): New.
Add comments for '&'.
(reg_table): Replace "{T|}" with "{&|}" on call and jmp.
(putop): Handle '&'.
(intel_operand_size): Handle indir_v_mode.
(OP_E_register): Likewise.
* i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64. Add
64-bit indirect call/jmp for AMD64.
* i386-tbl.h: Regenerated
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
gas * testsuite/gas/arc/nps-400-1.s: Add rflt variants with
operands of types a,b,u6, 0,b,u6, and 0,b,limm.
* testsuite/gas/arc/nps-400-1.d: Likewise.
opcodes * arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and
0,b,limm to the rflt instruction.
The AVX512VL bit alone isn't sufficient to select a 128-bit or 256-bit
AVX512 instruction. We must match another AVX512 bit.
PR gas/20140
* config/tc-i386.c (cpu_flags_match): Require another match
for AVX512VL.
* testsuite/gas/i386/i386.exp: Run avx512vl-1, avx512vl-2,
x86-64-avx512vl-1 and x86-64-avx512vl-2.
* testsuite/gas/i386/avx512vl-1.l: New file.
* testsuite/gas/i386/avx512vl-1.s: Likewise.
* testsuite/gas/i386/avx512vl-2.l: Likewise.
* testsuite/gas/i386/avx512vl-2.s: Likewise.
* testsuite/gas/i386/x86-64-avx512vl-1.l: Likewise.
* testsuite/gas/i386/x86-64-avx512vl-1.s: Likewise.
* testsuite/gas/i386/x86-64-avx512vl-2.l: Likewise.
* testsuite/gas/i386/x86-64-avx512vl-2.s: Likewise.
PR target/2006764
* config/tc-arm.c (move_or_literal_pool): Only generate a VMOV.I64
instruction if supported by the currently selected fpu variant.
* testsuite/gas/arm/vfpv3-ldr_immediate.s: Add test of this PR.
* testsuite/gas/arm/vfpv3-ldr_immediate.d: Update expected disassembly.
Do not convert jump relocs against local MIPS16 or microMIPS symbols to
refer to a section symbol instead even on RELA targets, as it makes it
impossible for the linker to make a JAL to JALX conversion based on ISA
symbol annotation, breaking regular and compressed MIPS interlinking.
gas/
* config/tc-mips.c (mips_fix_adjustable): Also return 0 for
jump relocations against MIPS16 or microMIPS symbols on RELA
targets.
* testsuite/gas/mips/jalx-local.d: New test.
* testsuite/gas/mips/jalx-local-n32.d: New test.
* testsuite/gas/mips/jalx-local-n64.d: New test.
* testsuite/gas/mips/jalx-local.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-local.d: New test.
* testsuite/ld-mips-elf/jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
We should preserve addend for R_386_GOT32 and R_X86_64_GOT32 as in
"movl $foo@GOT + 4, %eax" and "movq $foo@GOT + 4, %rax".
PR gas/19600
* config/tc-i386.c (md_apply_fix): Preserve addend for
BFD_RELOC_386_GOT32 and BFD_RELOC_X86_64_GOT32.
* testsuite/gas/i386/addend.d: New file.
* testsuite/gas/i386/addend.s: Likewise.
* testsuite/gas/i386/x86-64-addend.d: Likewise.
* testsuite/gas/i386/x86-64-addend.s: Likewise.
* testsuite/gas/i386/i386.exp: Run addend and x86-64-addend.
* testsuite/gas/i386/reloc32.d: Updated.
The microMIPS JALX instruction shares the R_MICROMIPS_26_S1 relocation
with microMIPS J/JAL/JALS instructions, however unlike the latters its
encoded immediate argument is unusually shifted left by 2 rather than 1
in calculating the value used for the operation requested.
We already handle this exception in `mips_elf_calculate_relocation' in
LD, in a scenario where JALX is produced as a result of relaxing JAL for
the purpose of making a cross-mode jump. We also get it right in the
disassembler in `decode_micromips_operand'.
What we don't correctly do however is processing microMIPS JALX produced
by GAS from an assembly source, where a non-zero constant argument or a
symbol reference with a non-zero in-place addend has been used. In this
case the same calculation is made as for microMIPS J/JAL/JALS, causing
the wrong encoding to be produced by GAS on making an object file, and
then again by LD in the final link. The latter in particular causes the
calculation, where the addend fits in the relocatable field, to produce
different final addresses for the same source code depending on whether
REL or RELA relocations are used.
Correct these issues by special-casing microMIPS JALX in the places that
have been previously missed.
bfd/
* elfxx-mips.c (mips_elf_read_rel_addend): Adjust the addend for
microMIPS JALX.
gas/
* config/tc-mips.c (append_insn): Correct the encoding of a
constant argument for microMIPS JALX.
(tc_gen_reloc): Correct the encoding of an in-place addend for
microMIPS JALX.
* testsuite/gas/mips/jalx-addend.d: New test.
* testsuite/gas/mips/jalx-addend-n32.d: New test.
* testsuite/gas/mips/jalx-addend-n64.d: New test.
* testsuite/gas/mips/jalx-imm.d: New test.
* testsuite/gas/mips/jalx-imm-n32.d: New test.
* testsuite/gas/mips/jalx-imm-n64.d: New test.
* testsuite/gas/mips/jalx-addend.s: New test source.
* testsuite/gas/mips/jalx-imm.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-addend.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The opcode array iterator mechanism can, in some situations, result in
reading memory outside of the opcode array. When using the
iterator-next mechanism to find the next possible arc_opcode, if we find
an opcode where the name field is NULL, or the name does not match, then
the cached opcode pointer is not set to NULL. The result is that
another call to iterator-next will again increment the opcode
pointer (which might now point outside the opcode array) and attempt to
access the name field of this undefined opcode.
Fixed in this commit by clearing the cached opcode pointer.
I've added a test case, which currently shows the bug, however, this
will only expose this bug while the opcode used (dsp_fp_cmp) is the last
opcode in the table.
gas/ChangeLog:
* config/tc-arc.c (arc_opcode_hash_entry_iterator_next): Set
cached opcode to NULL when we reach a non-matching opcode.
* testsuite/gas/arc/asm-errors-2.d: New file.
* testsuite/gas/arc/asm-errors-2.err: New file.
* testsuite/gas/arc/asm-errors-2.s: New file.
Currently supplying an input file with too many operands to an
instruction will cause the assembler to overflow and array and trigger
undefined behaviour.
This change checks that we don't access outside the limits of the
operand array.
gas/ChangeLog:
* config/tc-arc.c (tokenize_arguments): Add checks for array
overflow.
* testsuite/gas/arc/asm-errors.s: Addition test line added.
* testsuite/gas/arc/asm-errors.err: Update expected results.
Commit b84bf58a accidentally extended the range of allowed negative
numbers.
* config/tc-ppc.c (ppc_insert_operand): Trim PPC_OPERAND_SIGNOPT
allowed negative range.
* testsuite/gas/ppc/power9.s: Test xxspltib of -128, not -256.
* testsuite/gas/ppc/power9.d: Update.
Jan Beulich
Matthew Fortune
Maciej W. Rozycki
Matthew Wahab
Alan Modra
Richard Sandiford
Vineet Gupta
Nick Clifton
Peter Bergner
Graham Markall
Jose E. Marchesi
Andrew Burgess
H.J. Lu
Chua Zheng Leong