The stat syscalls cannot work without a stat map, so declare one that
matches libgloss for virtual environments.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* iwmmxt.c (WCMPGT): Sign extend 32-bit values before performing a
signed compare.
(WMAC): Extend computed result before adding to result register.
(WRSA): Sign extend 32-bit values before shifting.
Now that the Blackfin libgloss code extracts the 2nd result and the
error code from the R1/R2 registers, have the sim fill them up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The LSHIFT/ASHIFT insns that work with accumulators lacked AV/AVS
handling in the ASTAT register, so add it to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If we're shifting accumulators, we don't want to touch the V bit in
ASTAT, so add size checks to the ashiftrt/lshiftrt helpers.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The logical shift insn does not sign extend before shifting, so
we shouldn't either.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This too should have been squashed into an earlier change. It covers
a few more cases in the V/VS saturation patch when working with TFU
and FU modes of dsp insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the shift magnitude exceeds 32 bits, the values rotate around (since
the hardware is actually a barrel shifter). So handle this edge case,
update the corresponding AV bit in ASTAT which was missing previously,
and tweak the AZ setting based on how the hardware behaves.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The shift magnitude is a 5-bit signed value. When it is between 0 and
15, then we do the requested shift, but when it is outside of that, we
have to do the opposite.
That means we flip between lshift and ashiftrt to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This reverts the previous commit and does it right. This change got
lost in the shuffle of patches I have pending.
Basically the logic is to change the 32bit saturation (and then masked
to 16bits) to a proper 16bit saturation.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some saturation cases with dsp mac insns were not setting the V flag.
So implement that part and split up the logic between the dual macs.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Our handling of the M_IU/M_TFU modes are missing signed saturation when
the MM flag is set, so add it to match the hardware behavior.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
After testing the hardware with all the different dsp flags, the MM flag
triggers sign extension in all modes. So drop the limited use of it, and
the local custom helper that was also extending unsigned values. We also
can see that the flag checks in the mult/mac insns have the same behavior
with sign extending, so add a helper func to keep the logic the same in
both places.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When using the IH modifier, we need to first saturate the value before
rounding it, and then further saturate it a bit more. This makes the
sim match the hardware behavior with these insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the accumulator saturates, it needs to be greater than, but not
equal to, the largest unsigned value as this is what the hardware does.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fixes an error reported by Tristan and which can be evidenced by
doing:
% powerpc-elf-gdb
(gdb) target sim --sysroot=var
Invalid option: --sysroot=/var
[...]
sim/ppc/ChangeLog:
* psim.c (psim_options): Fix length of comparison when checking
for --sysroot= option.
This patch improves the error message when an invalid option is
detected, by also printing the option that actually caused the error.
For instance, from GDB:
(gdb) target sim --hello
Invalid option: --hello
Usage:
[...]
We also added the usage after an invalid long-name option (Eg: --hello)
to be in line with what's being done for all other invalid options
being detected.
sim/ppc/ChangeLog:
* psim.c (psim_options): Add option that cause the error
in invalid-option error messages. Print the usage when
detecting an invalid long-name option.
There was a recent change that cuased the "target sim" command
to add a --sysroot option to the argument vector passed down to
the simulator. This caused a failure in the powerpc simulator,
as it did not recognize it. This patch fixes the problem by adding
support for the --sysroot option (it ignores it).
sim/ppc/ChangeLog:
* psim.c (psim_options): Accept and ignore `--sysroot=...'.
Now that the common sim testsuite code supports .S and .c files, we
can import the Blackfin testsuite. There are about ~800 tests here,
so I'm only attaching a compressed patch of them. Other than adding
files to sim/testsuite/sim/bfin/, the sim/configure.tgt file was
updated to mark Blackfin as having a testsuite, and sim/configure
regenerated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The BF537 family glues a bunch of peripherals into single interrupt lines
that run into the SIC. To model this same behavior in the sim, we need to
use the glue-or device, and in order to use that, we need to tweak things
a bit in the mach code to allow declaring of these new devices.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The machs.c file is the best place for holding cpu-specific details, so
restructure the way the SIC manages its ports to do just that. Now the
SIC's have a standard set of input pins and the different line routing
from peripherals is kept in the device tree only. This better models
the hardware where the SIC doesn't care about the exact peripheral that
is sending it stuff, just which input pin it gets it on.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This patch fixes a build failure at link time due to
sim_complete_command being undefined. There was a recent change
that added this function to all the ports that do not use the
common/ subdir. But somehow, the erc32 port got missed.
sim/erc32/ChangeLog:
* interf.c (sim_complete_command): New stub function.
The current --sysroot parsing attempts to keep from leaking memory by
treating the empty string specially (sine this is the initial value),
but it ends up leaking memory when the arg is an empty string. So if
someone uses --sysroot "", the old value is leaked, as is the new one.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A semi-recent change which regenerated nltvals.def somehow missed all of
the Blackfin syscalls. So regenerate against the latest tree to get them
back.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the common code supports the syscall trace level, change the
Blackfin code from using the event level to the syscall level.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It's useful to be able to trace just the system calls the simulated
program is calling, so add a new --trace-syscall option for ports to
leverage if they choose.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Pull the model data (register addresses/sizes) out of the different model
files and into the machs.h header. The models themselves don't care about
where they're mapped, only the mach code does. This allows us to keep the
model headers from being included in the mach code which can cause issues
with model-specific names colliding. Such as when a newer device model is
created, but with incompatible register names/layouts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some Blackfin parts tie a bunch of interrupt lines into a single OR
gate before feeding the result into the SIC. The glue-or device in
the sim provides a nice way of modeling this exact behavior. At the
moment though, it requires the device to be mapped into the address
space so that things could write to it directly. This is not needed
for the Blackfin usage, so make it optional. Now the glue devices
can be used to simply tie interrupt lines together.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The glue device has a bunch of "todos" for the misc bitwise devices.
So implement two for fun -- the glue-or and glue-xor.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Rather than requiring all sim tests to be preprocessed .s files, add
support for .S and .c files so we can easily write code using a higher
level language like C.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The UART has a LOOP_ENA bit in its MCR register where writes to the THR
go to the RBR. Implement support for this mode.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A few bits in the newer UART LSR register are not sticky, so make sure
we clear them when returning updated status rather than leaving them
always set.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
