5c5acbbddf
Enable FMA instructions for bdver2
...
gas/testsuite/
PR gas/14423
* gas/i386/arch-10-bdver2.d: New file.
* gas/i386/x86-64-arch-2-bdver2.d: Likewise.
* gas/i386/i386.exp: Run new test
opcodes/
2012-08-11 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
PR gas/14423
* i386-gen.c (cpu_flag_init): Add CpuFMA in CPU_BDVER2_FLAGS.
* i386-init.h: Regenerated.
2012-08-10 21:19:40 +00:00
d7189fa58e
gas/testsuite/
...
* gas/i386/prefetch.s: New file.
* gas/i386/prefetch.d: New file.
* gas/i386/prefetch-intel.d: New file.
* gas/i386/x86-64-prefetch.d: New file.
* gas/i386/x86-64-prefetch-intel.d: New file.
* gas/i386/i386.exp: Run them.
opcodes/
* i386-dis.c (reg_table): Fill out REG_0F0D table with
AMD-reserved cases as "prefetch".
(MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
(MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
(reg_table): Use those under REG_0F18.
(mod_table): Add those cases as "nop/reserved".
2012-08-07 18:22:04 +00:00
848930b2ba
Despite them being ignored by the CPU, gas issues segment override
...
prefixes for other than FS/GS in 64-bit mode. If doing so at all, it
should clearly do this correctly. Determining the default segment,
however, requires to take into consideration RegRex (so far, RSP, RBP,
R12, and R13 were all treated equally here).
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386-intel.c (build_modrm_byte): Split determining
default segment from figuring out encoding. Honor RegRex for
the former.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/x86-64-segovr.{s,l}: New.
* gas/i386/i386.exp: Run new test.
2012-08-07 16:57:49 +00:00
7bab8ab56f
The VGATHER group of instructions requires that all three involved
...
xmm/ymm registers are distinct. This patch adds code to check for this,
and at once eliminates a superfluous check for not using PC-relative
addressing for these instructions (the fact that an index register is
required here already excludes valid PC-relative addresses). The
severity of the resulting diagnostics can be controlled via command
line option or directive.
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (set_check): Renamed from set_sse_check.
Generalize to also handle operand checking option.
(enum i386_error): New enumerator 'invalid_vector_register_set'.
(match_template): Handle it.
(enum check_kind): Give it a tag. Drop sse_ prefixes from
enumerators.
(operand_check): New.
(md_pseudo_table): Add "operand_check".
(check_VecOperands): Don't special case RIP addressing. Check
that vSIB operands use distinct vector registers unless no
checking was requested.
(OPTION_MOPERAND_CHECK): New.
(md_parse_option): Handle it.
(OPTION_MAVXSCALAR, OPTION_X32): Adjust.
(md_longopts): Add "moperand-check".
(md_show_usage): Add help text for it.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/vgather-check-error.{s,l}: New.
* gas/i386/vgather-check-none.{s,d}: New.
* gas/i386/vgather-check-warn.{d,e}: New.
* gas/i386/vgather-check.{s,d}: New.
* gas/i386/x86-64-vgather-check-error.{s,l}: New.
* gas/i386/x86-64-vgather-check-none.{s,d}: New.
* gas/i386/x86-64-vgather-check-warn.{d,e}: New.
* gas/i386/x86-64-vgather-check.{s,d}: New.
* gas/i386/i386.exp: Run new tests.
2012-08-07 16:55:00 +00:00
4c692bc7aa
There were several cases where the registers in the REX encoded range
...
got treated identically to the ones in the base range, due to not
paying attention to the fact that reg_entry's reg_num field doesn't
fully specify the register number (reg_flags also needs to be checked
for RegRex). This patch introduces and uses a new (inline) function to
obtain the full register number, and uses it to fix all those cases.
It additionally adds the missing operand checks for SVME instructions
(which match the monitor/mwait ones).
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (register_number): New function.
(build_vex_prefix, process_immext, process_operands,
build_modrm_byte, i386_index_check): Use it.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/x86-64-specific-reg.{s,l}: New.
* gas/i386/i386.exp: Run new test.
opcodes/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl: Remove "FIXME" comments from SVME instructions.
2012-08-07 16:51:34 +00:00
a988325c24
* config/tc-i386.c (lex_got): Provide implementation for PE
...
format.
* gas/i386/secrel.s: Add test of <symbol>@SECREL32.
* gas/i386/secrel.d: Add expected disassembly.
* scripttempl/pe.sc (R_TLS): Add .tls$AAA and .tls$ZZZ.
* scripttempl/pep.sc (R_TLS): Add .tls$AAA and .tls$ZZZ.
* archive.c (_bfd_delete_archive_data): New function.
* libbfd-in.h (_bfd_delete_archive_data): Declare.
* libbfd.h: Rebuild.
* opncls.c (_bfd_delete_bfd): Call _bfd_delete_archive_data.
2012-08-07 13:47:19 +00:00
de88229846
gas/testsuite/
...
* gas/i386/x86-64-stack.s: Add cases for push segment register.
* gas/i386/x86-64-stack.d: Updated.
* gas/i386/x86-64-stack-suffix.d: Updated.
* gas/i386/x86-64-stack-intel.d: Updated.
* gas/i386/ilp32/x86-64-stack.d: Updated.
* gas/i386/ilp32/x86-64-stack-suffix.d: Updated.
* gas/i386/ilp32/x86-64-stack-intel.d: Updated.
opcodes/
* i386-dis.c (print_insn): Print spaces between multiple excess
prefixes. Return actual number of excess prefixes consumed,
not always one.
* i386-dis.c (OP_REG): Ignore REX_B for segment register cases.
2012-08-06 22:08:25 +00:00
99262e37ef
gas/testsuite/
...
* gas/mips/mips.exp: Set has_newabi for all Linux targets.
* gas/mips/cfi-n64-1.d: Adjust for targets that do not infer the
ISA from the ABI.
* gas/mips/elf-rel-got-n32.d: Likewise.
* gas/mips/elf-rel-got-n64.d: Likewise.
* gas/mips/elf-rel-xgot-n32.d: Likewise.
* gas/mips/elf-rel-xgot-n64.d: Likewise.
* gas/mips/elf-rel18.d: Likewise.
* gas/mips/elf-rel28-n32.d: Likewise.
* gas/mips/elf-rel28-n64.d: Likewise.
* gas/mips/jal-newabi.d: Likewise.
* gas/mips/ldstla-n64-shared.d: Likewise.
* gas/mips/ldstla-n64-sym32.d: Likewise.
* gas/mips/ldstla-n64.d: Likewise.
* gas/mips/macro-warn-1-n32.d: Likewise.
* gas/mips/macro-warn-2-n32.d: Likewise.
* gas/mips/n32-consec.d: Likewise.
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Set has_newabi for all Linux targets.
Adjust abi_asflags for targets that do not infer the ISA from the
ABI.
* ld-mips-elf/eh-frame1-n32.d: Adjust for targets that do not
infer the ISA from the ABI.
* ld-mips-elf/eh-frame1-n64.d: Likewise.
* ld-mips-elf/eh-frame2-n32.d: Likewise.
* ld-mips-elf/eh-frame2-n64.d: Likewise.
* ld-mips-elf/elf-rel-got-n32-embed.d: Likewise.
* ld-mips-elf/elf-rel-got-n32.d: Likewise.
* ld-mips-elf/elf-rel-got-n64-embed.d: Likewise.
* ld-mips-elf/elf-rel-got-n64-linux.d: Likewise.
* ld-mips-elf/elf-rel-got-n64.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n32.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64.d: Likewise.
* ld-mips-elf/emit-relocs-1.d: Likewise.
* ld-mips-elf/got-page-2.d: Likewise.
* ld-mips-elf/no-shared-1-n32.d: Likewise.
* ld-mips-elf/no-shared-1-n64.d: Likewise.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
* ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* ld-mips-elf/relax-jalr-n32.d: Likewise.
* ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
* ld-mips-elf/relax-jalr-n64.d: Likewise.
* ld-mips-elf/reloc-1-n32.d: Likewise.
* ld-mips-elf/reloc-1-n64.d: Likewise.
* ld-mips-elf/textrel-1.d: Likewise.
2012-08-06 21:28:45 +00:00
ef2b5578f6
gas/testsuite/
...
* gas/mips/mips.exp: Set has_newabi for mips*-sde-elf* too.
* gas/mips/elf-rel-got-n32.s: Adjust padding.
* gas/mips/elf-rel-got-n64.s: Likewise.
* gas/mips/elf-rel23.s: Likewise.
* gas/mips/elf-rel28.s: Likewise.
* gas/mips/n32-consec.s: Likewise.
* gas/mips/elf-rel-xgot-n32.d: Adjust output expected.
* gas/mips/elf-rel-xgot-n64.d: Likewise.
* gas/mips/elf-rel23.d: Likewise.
* gas/mips/elf-rel23a.d: Likewise.
* gas/mips/elf-rel23b.d: Likewise.
* gas/mips/elf-rel28-n32.d: Likewise.
ld/testsuite/
* lib/ld-lib.exp (run_dump_test): Implement the EXTRA_OPTIONS
argument and the "dump" keyword.
* ld-mips-elf/emit-relocs-1a.s: Make section alignment uniform
across targets.
* ld-mips-elf/emit-relocs-1b.s: Likewise.
* ld-mips-elf/jalbal.s: Adjust padding.
* ld-mips-elf/elf-rel-got-n32-embed.d: New test.
* ld-mips-elf/elf-rel-got-n64-embed.d: New test.
* ld-mips-elf/elf-rel-xgot-n32-embed.d: New test.
* ld-mips-elf/elf-rel-xgot-n64-embed.d: New test.
* ld-mips-elf/elf-rel-got-n32.d: Remove -melf32btsmipn32.
* ld-mips-elf/elf-rel-got-n64.d: Remove -melf64btsmip. Adjust
output.
* ld-mips-elf/elf-rel-got-n64-linux.d: Remove -melf64btsmip.
* ld-mips-elf/elf-rel-xgot-n32.d: Remove -melf32btsmipn32.
Adjust output.
* ld-mips-elf/elf-rel-xgot-n64.d: Remove -melf64btsmip. Adjust
output.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
* ld-mips-elf/reloc-1-n64.d: Remove -melf64btsmip.
* ld-mips-elf/mips-elf.exp: Set has_newabi for mips*-sde-elf*
too. Move tool flags from o32_as_flags and o32_ld_flags
variables into abi_asflags and abi_ldflags arrays. Adjust test
cases run to use them. Run the new tests.
2012-08-06 21:05:54 +00:00
464ab0e55a
gas/
...
* config/tc-mips.c (append_insn): Also handle moving delay-slot
instruction across frags for fixed branches.
gas/testsuite/
* gas/mips/branch-swap-2.l: New list test.
* gas/mips/branch-swap-2.s: New test source.
* gas/mips/mips.exp: Run the new test.
2012-08-06 20:33:00 +00:00
7bb15c6f21
gas/testsuite/
...
* gas/i386/x86-64-stack.s: Add cases for push immediate.
* gas/testsuite/gas/i386/ilp32/x86-64-stack-intel.d: Updated.
* gas/testsuite/gas/i386/ilp32/x86-64-stack-suffix.d: Updated.
* gas/testsuite/gas/i386/ilp32/x86-64-stack.d: Updated.
* gas/testsuite/gas/i386/x86-64-stack-intel.d: Updated.
* gas/testsuite/gas/i386/x86-64-stack-suffix.d: Updated.
* gas/testsuite/gas/i386/x86-64-stack.d: Updated.
opcodes/
* i386-dis.c (OP_sI): In b_T_mode and v_mode, REX_W trumps DFLAG.
(putop): For 'T', 'U', and 'V', treat REX_W like DFLAG.
(intel_operand_size): For stack_v_mode, treat REX_W like DFLAG.
(OP_E_register): Likewise.
(OP_REG): For low 8 whole registers, treat REX_W like DFLAG.
2012-08-06 20:19:34 +00:00
3db8daf394
* frags.c (frag_grow): Never shrink the obstack size requested
...
below the default.
2012-08-03 22:23:44 +00:00
3e645041a7
gas/testsuite/
...
* gas/i386/x86-64-stack.s (try): Also try just rex.W (0x48) prefix.
* gas/testsuite/gas/i386/ilp32/x86-64-stack-intel.d: Updated.
* gas/testsuite/gas/i386/ilp32/x86-64-stack-suffix.d: Updated.
* gas/testsuite/gas/i386/ilp32/x86-64-stack.d: Updated.
* gas/testsuite/gas/i386/x86-64-stack-intel.d: Updated.
* gas/testsuite/gas/i386/x86-64-stack-suffix.d: Updated.
* gas/testsuite/gas/i386/x86-64-stack.d: Updated.
2012-08-03 21:45:16 +00:00
03d46c0e96
* config/tc-m68hc11.c (s_m68hc11_parse_pseudo_instruction):
...
New function to parse pseudo ops that are unreleated to
existing pseudo ops.
2012-08-02 20:26:52 +00:00
bdfd67fa6b
* tc-m68hc11.c (s_m68hc11_parse_pseudo_instruction):
...
New function to parse pseudo ops that are unreleated to
existing pseudo ops.
2012-08-02 20:25:35 +00:00
399c99f739
Display null bytes in DWARF debug info
...
binutils/
PR binutils/14420
* dwarf.c (process_abbrev_section): Add attribute terminator.
Warn missing section terminator.
(get_FORM_name): Special check for 0 value.
(get_AT_name): Likewise.
(process_debug_info): Display zero abbrev number. Check
attribute terminator.
binutils/testsuite/
PR binutils/14420
* binutils-all/i386/compressed-1a.d: Updated.
* binutils-all/objdump.W: Likewise.
* binutils-all/readelf.wa: Likewise.
* binutils-all/x86-64/compressed-1a.d: Likewise.
gas/testsuite/
PR binutils/14420
* gas/elf/dwarf2-1.d: Updated.
* gas/elf/dwarf2-2.d: Likwise.
* gas/i386/dw2-compress-1.d: Likwise.
2012-08-02 13:42:59 +00:00
711eefe492
2012-08-01 Catherine Moore <clm@codesourcery.com>
...
Sandra Loosemore <sandra@codesourcery.com>
gas/
* config/mips/tc-mips.c (mips_cpu_info): Add the 34kn.
* doc/c-mips.texi (MIPS Opts): Document it.
2012-08-01 19:59:43 +00:00
4e47244dbe
Reformat ChangeLog files
2012-08-01 15:59:55 +00:00
8fbf7334de
gas/ChangeLog:
...
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/dwarf2dbg.c (out_set_addr): Allow for non-constant value of
DWARF2_LINE_MIN_INSN_LENGTH
* gas/config/tc-ppc.c (ppc_dwarf2_line_min_insn_length): Declare
and initialize.
(md_apply_fix): Branch addr can be a multiple of 2 or 4.
* gas/config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): Now a
variable reference.
gas/testsuite/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/cfi/cfi-ppc-1.d: Allow for code alignment of 2 or 4.
ld/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* ld/testsuite/ld-gc/pr13683.d: XFAIL for powerpc*-*-eabivle.
2012-08-01 13:46:59 +00:00
7a2d09ccbf
Correct ChangeLog.
2012-08-01 03:05:50 +00:00
03f66e8a8f
include/opcode/
...
* mips.h: Document microMIPS DSP ASE usage.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Update for
microMIPS DSP ASE support.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
gas/
* config/tc-mips.c (macro_build) <'2'>: Handle microMIPS.
(macro) <M_BALIGN>: Update error handling.
(validate_micromips_insn) <'2', '3', '4', '5', '6'>: New cases.
<'7', '8', '0', '@', '^'>: Likewise.
(mips_ip) <'2', '3', '4', '5', '6', '7', '8'>: Handle microMIPS.
<'9'>: Fix formatting.
<'0', '@'>: Handle microMIPS.
<'^'>: New case.
gas/testsuite/
* gas/mips/micromips@mips32-dsp.d: New.
* gas/mips/micromips@mips32-dspr2.d: New.
* gas/mips/mips32-dsp.d: Remove -mips32r2.
* gas/mips/mips32-dspr2.d: Likewise.
* gas/mips/mips.exp: (mips_create_arch): Use -mips64r2
for micromips. Use run_dump_test_arches to run dsp tests.
opcodes/
* micromips-opc.c (WR_a, RD_a, MOD_a): New macros.
(DSP_VOLA): Likewise.
(D32, D33): Likewise.
(micromips_opcodes): Add DSP ASE instructions.
* micromips-dis.c (print_insn_micromips) <'2', '3'>: New cases.
<'4', '5', '6', '7', '8', '0', '^', '@'>: Likewise.
2012-07-31 21:38:54 +00:00
33fee3c9c6
Update gas/d30v/bittest.l
...
* gas/d30v/bittest.l: Updated.
2012-07-31 20:46:59 +00:00
0ac3caa958
Append "#pass" to gas/i386/rdseed-intel.d
...
* gas/i386/rdseed-intel.d: Append "#pass".
2012-07-31 20:46:07 +00:00
4a2608e354
The current error message for bad imm4 operands wasn't really helpful,
...
and was pointing at the wrong operand in Intel mode. Since non-constant
operands are being taken care of by other means anyway, adjust it to
simply state that the constant doesn't fit.
2012-07-31 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): Adjust error message
for 'bad_imm4' case.
2012-07-31 07:45:48 +00:00
5a819eb989
Since the word to byte register conversion isn't active for x86-64
...
anyway, there's also no need to issue a separate, inconsistent
diagnostic in some of the cases - non-matching operands will be
complained about anyway.
2012-07-31 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (check_byte_reg): Check for I/O port
register earlier, and just once. Drop diagnostic that got
issued only for some registers.
2012-07-31 07:43:38 +00:00
5614d22c1d
At the point where check_VecOperands()/VEX_check_operands() get run,
...
all other instruction attributes already matched, so any mismatch here
will tell the user more precisely what is wrong than using an eventual
(and very likely to occur) more generic error encountered on a
subsequent iteration through the template matching loop.
2012-07-31 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): New local variable
'specific_error'. Set it from i.error after failed
check_VecOperands or VEX_check_operands. Use it if set in
preference to i.error when actually issuing disagnostic.
2012-07-31 07:41:39 +00:00
8a4b034f5f
2012-07-27 Sean Keys <skeys@ipdatasys.com>
...
* gas/xgate/xgate.exp: Added hi/lo test.
* gas/xgate/hilo.d: New test file
* gas/xgate/hilo.s: Net test source file.
2012-07-30 21:39:06 +00:00
6b0d957ec7
Added missing gas/ChangeLog entries for previous XGATE commits.
2012-07-30 21:29:59 +00:00
db7c7ead66
Update gas/i386/inval-equ-2.l
...
* gas/i386/inval-equ-2.l: Updated.
2012-07-30 17:11:39 +00:00
204d254e64
2012-07-27 James Murray <jsm@jsm-net.demon.co.uk>
...
* config/tc-m68hc11.c: Replace binary with hex for cygwin.
2012-07-30 16:49:05 +00:00
a6dc81d2ab
Updated translations
2012-07-30 08:43:46 +00:00
8d8ad4eb57
2012-07-27 Sean Keys <skeys@ipdatasys.com>
...
gas/config/
* tc-xgate.c: Consolidated inc/dec/hi/low modifieres into
one function.
(xgate_parse_operand): Added %hi and %lo handling.
gas/testsuite/gas/xgate
* xgate.exp: Added hi/lo test.
* hilo.d: New test file
* hilo.s: Net test source file.
2012-07-27 22:33:22 +00:00
c4dd807e7b
bfd: update to AC_INIT
...
Move the package name/version from AM_INIT_AUTOMAKE to AC_INIT per recent
autotools guidelines. We use recent versions of both, so it shouldn't be
a problem.
This sets PACKAGE_xxx variables correctly, and makes the output of:
./configure --version
actually useful:
bfd configure 2.22.52
Changing the other dirs to use AC_INIT would require a bit of m4 trickery
that I don't feel like getting into, and they all use BFD_VERSION anyways,
so there isn't much point.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-27 16:30:57 +00:00
6832c67c6d
2012-07-27 James Murray <jsm@jsm-net.demon.co.uk>
...
* config/tc-m68hc11.c: Replace binary with hex for cygwin.
2012-07-27 14:13:23 +00:00
af18cb5940
binutils/
...
2012-07-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.23.
gas/
2012-07-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.23.
ld/
2012-07-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.23.
2012-07-27 08:13:03 +00:00
c71bb85d64
2012-07-26 Segher Boessenkool <segher@kernel.crashing.org>
...
gas/
* listing.c (struct list_message): New.
(struct list_info_struct): Delete "message". Add "messages"
and "last_message".
(listing_message): Adjust.
(listing_newline): Adjust.
(print_lines): Adjust.
2012-07-27 03:32:21 +00:00
9e2934f799
MASM accepts ESP/RSP being specified second in a memory address
...
operand, by silently making it the base register despite not being
specified first.
Consequently, we also permit an xmm/ymm index to be specified first
(possibly alone), nevertheless putting it in as index register.
2012-07-24 Jan Beulich <jbeulich@suse.com>
* config/tc-i386-intel.c (i386_intel_simplify_register): Handle
xmm/ymm index register being specified first as well as esp/rsp
base register being specified last in a memory operand.
2012-07-25 11:34:49 +00:00
8280f32685
Using the dedicated manifest constant is more descriptive.
...
2012-07-24 Jan Beulich <jbeulich@suse.com>
* config/tc-i386-intel.c (i386_intel_simplify_register):
Replace literal 4 by corresponding ESP_REG_NUM.
2012-07-25 11:33:23 +00:00
5e73442d4c
2012-07-24 Sandra Loosemore <sandra@codesourcery.com>
...
Jie Zhang <jzhang918@gmail.com>
gas/
* config/tc-arm.c (md_apply_fix): Use encoding A2 of ADR
if offset is negative.
gas/testsuite/
* gas/arm/adr.d: New test.
* gas/arm/adr.s: New test.
2012-07-24 16:38:35 +00:00
e2e1fcde62
Implement RDRSEED, ADX and PRFCHW instructions
...
gas/
* config/tc-i386.c: Add ADX, RDSEED and PRFCHW asm directives.
* doc/c-i386.texi: Document the new directives.
gas/testsuite/
* gas/i386/i386.exp: Run adx, rdseed and prefetchw tests.
* gas/i386/x86-64-arch-2.s: Use prefetchw as 3dnow and Prfchw tests.
* gas/i386/arch-10.s: Likewise.
* gas/i386/arch-10-1.l: Changed correspondingly.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-10.d: Likewise.
* gas/i386/arch-10-lzcnt.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-arch-2-lzcnt.d: Likewise.
* gas/i386/ilp32/x86-64-arch-2.d: Likewise.
* gas/i386/arch-10-prefetchw.d: New file.
* gas/i386/x86-64-arch-2-prefetchw.d: Likewise.
* gas/i386/rdseed.s: Likewise.
* gas/i386/rdseed.d: Likewise.
* gas/i386/rdseed-intel.d: Likewise.
* gas/i386/adx.s: Likewise.
* gas/i386/adx.d: Likewise.
* gas/i386/adx-intel.d: Likewise.
* gas/i386/x86-64-rdseed.s: Likewise.
* gas/i386/x86-64-rdseed.d: Likewise.
* gas/i386/x86-64-rdseed-intel.d: Likewise.
* gas/i386/x86-64-adx.s: Likewise.
* gas/i386/x86-64-adx.d: Likewise.
* gas/i386/x86-64-adx-intel.d: Likewise.
opcodes/
* i386-dis.c (PREFIX_0F38F6): New.
(prefix_table): Add adcx, adox instructions.
(three_byte_table): Use PREFIX_0F38F6.
(mod_table): Add rdseed instruction.
* i386-gen.c (cpu_flag_init): Add CpuADX, CpuRDSEED, CpuPRFCHW.
(cpu_flags): Likewise.
* i386-opc.h: Add CpuADX, CpuRDSEED, CpuPRFCHW.
(i386_cpu_flags): Add fields cpurdseed, cpuadx, cpuprfchw.
* i386-opc.tbl: Add instrcutions adcx, adox, rdseed. Extend
prefetchw.
* i386-tbl.h: Regenerate.
* i386-init.h: Likewise.
2012-07-16 12:58:29 +00:00
3879925e69
gas/config/
...
* tc-xgate.c: Revised assembler so that operands
are collected before the addressing mode is
determined.
include/opcode/
* xgate.h: Changed the format string for mode
XGATE_OP_DYA_MON.
opcodes/
* xgate-dis.c: Removed an IF statement that will
always be false due to overlapping operand masks.
* xgate-opc.c: Corrected 'com' opcode entry and
fixed spacing.
2012-07-05 19:37:52 +00:00
9fa0f14a97
gas/testsuite/
...
* gas/i386/rep-suffix.s: Add 'rep nop' case.
* gas/i386/x86-64-rep-suffix.s: Likewise.
* gas/i386/rep-suffix.d: Updated.
* gas/i386/x86-64-rep-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-rep-suffix.d: Likewise.
opcodes/
* i386-opc.tbl: Add RepPrefixOk to nop.
* i386-tbl.h: Regenerate.
2012-07-02 18:12:28 +00:00
d628b0e133
Fix ChangeLog entry
2012-07-02 17:06:52 +00:00
7670492947
Move rep tests for bsf/bsr/ret to rep-suffix
...
* gas/i386/i386.exp: Don't run rep-bsf nor rep-ret.
* gas/i386/rep-bsf.d: Removed.
* gas/i386/rep-bsf.s: Likewise.
* gas/i386/rep-ret.d: Likewise.
* gas/i386/rep-ret.s: Likewise.
* gas/i386/rep-suffix.d: Updated.
* gas/i386/x86-64-rep-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-rep-suffix.d: Likewise.
* gas/i386/rep-suffix.s: Add tests for bsf, bsr and ret.
* i386/x86-64-rep-suffix.s: Likewise.
2012-07-02 17:04:51 +00:00
586ec8c1d0
* write.c (fixup_segment): Only perform the subtraction of an
...
fx_subsy symbol if MD_APPLY_SYM_VALUE allows it and the symbol is
properly defined.
* config/tc-msp430.h (MD_APPLY_SYM_VALUE): Define.
2012-07-02 07:35:06 +00:00
f3aa805470
Add testcases for PR gas/14315
...
PR gas/14315
* gas/elf/common1.d: New file.
* gas/elf/common1.l: Likewise.
* gas/elf/common1.s: Likewise.
* gas/elf/common2.d: Likewise.
* gas/elf/common2.l: Likewise.
* gas/elf/common2.s: Likewise.
* gas/elf/elf.exp: Run common1 and common2.
2012-06-30 12:35:52 +00:00
e95a6b1c3c
PR gas/14315
...
* config/obj-elf.c (obj_elf_weak): Don't set local.
2012-06-30 06:32:29 +00:00
08ea70204d
* frags.h (frag_offset_fixed_p): Update prototype.
...
* frags.c (frag_offset_fixed_p): Change type of "offset" to offsetT.
* expr.c (expr, resolve_expression): Likewise for frag_off var.
2012-06-30 00:27:31 +00:00
99aad25459
PR gas/14263
...
* config/tc-arm.c (parse_operands): Initialise val.
2012-06-29 15:15:48 +00:00
b9e10fe0cc
* gas/lns/lns.exp (lns-common-1): Add crx to alt target list.
2012-06-29 07:04:49 +00:00
fe54041627
gas/config/
...
* tc-xgate.h: Defined tc_frob_symbol.
* tc-xgate.c (xgate_frob_symbol): Wrote new function to mark
symbols as being XGATE by setting st_target_internal value.
bfd/
* elf32-xgate.c (elf32_xgate_add_symbol_hook): Added a temp patch
that forces st_target_internal to equal 1, since tc_frob_symbol
seems to need adjusting.
2012-06-28 21:36:35 +00:00
2b2f5df902
PR gas/14260
...
* config/tc-arm.c (encode_arm_addr_mode_common): Generate an error
message if literal pool addressing is used.
* gas/arm/ldr-t-bad.s: Add test of bogus use of literal pool
addressing.
* gas/arm/ldr-t-bad.l: Update expected assembler error message
output.
2012-06-28 15:38:15 +00:00
453dc3f010
* dwarf2dbg.c (DWARF2_USE_FIXED_ADVANCE_PC): Enable when using
...
linker relaxation.
(dwarf2_gen_line_info): Generate real, local, labels for line
numbers.
(dwarf2dbg_convert_frag): Do not finalize the computation of the
frag's symbol value when linker relaxation is enabled.
(ADDR_DELTA_LIMIT): Define.
(size_fixed_inc_line_addr): Use ADDR_DELTA_LIMIT.
(emit_fixed_inc_line_addr): Likewise.
* write.c (fixup_segment): If the subtraction of two symbols
cannot be resolved but is valid, then prevent bogus range warnings
by pre-biasing add_number.
* config/tc-h8300.h (DWARF2_USE_FIXED_ADVANCE_PC): Define to 0.
* gas/lns/lns.exp: Use alternate lns-common test for targets
enabling linker relaxation.
* gas/lns/lns-big-delta.d: Allow for output from architectures
with 32-bit addresses.
2012-06-28 11:31:14 +00:00
d7d20338d5
* gas/i386/rep-ret.s: Zero pad section.
...
* gas/i386/rep-ret.d: Update.
2012-06-27 01:17:11 +00:00
fe13e45b9a
gas/
...
* NEWS: Mention 'rep ret' too.
gas/testsuite/
* gas/i386/rep-ret.d: New file.
* gas/i386/rep-ret.s: New file.
* gas/i386/i386.exp: Add the new test.
opcodes/
* i386-opc.tbl: Add RepPrefixOk to ret.
* i386-tbl.h: Regenerate.
2012-06-22 21:54:06 +00:00
29c048b696
gas/
...
* config/tc-i386.c (parse_insn): Don't complain about REP prefix
when the template has opcode_modifier.repprefixok set.
* NEWS: Mention the change.
gas/testsuite/
* gas/i386/rep-bsf.d: New file.
* gas/i386/rep-bsf.s: New file.
* gas/i386/i386.exp: Add the new test.
opcodes/
* i386-opc.h (RepPrefixOk): New enum constant.
(i386_opcode_modifier): New bitfield 'repprefixok'.
* i386-gen.c (opcode_modifiers): Add RepPrefixOk.
* i386-opc.tbl: Add RepPrefixOk to bsf, bsr, and to all
instructions that have IsString.
* i386-tbl.h: Regenerate.
2012-06-22 16:42:08 +00:00
4b0296ce64
fix last commit
2012-06-18 04:43:07 +00:00
a574142b3e
* configure.in: Check DECLS for free, getenv, malloc, realloc,
...
* configure: Regenerate.
* config.in: Likewise.
2012-06-18 04:23:15 +00:00
357d1bd8fd
Fix .dc.a for x32
...
gas/
* config/tc-i386.c (x86_address_bytes): New.
* config/tc-i386.h (TC_ADDRESS_BYTES): Likewise.
(x86_address_bytes): Likewise.
gas/testsuite/
* gas/i386/ilp32/x86-64-dc_a.d: New.
* gas/i386/ilp32/x86-64-dc_a.s: Likewise.
2012-06-13 21:41:07 +00:00
1a43faafe7
PR gas/12698
...
* config/tc-arm.c (do_t_mrs): Do not require an m-profile
architecure when assembling for all archiectures.
(do_t_msr): Likewise.
2012-06-13 14:19:00 +00:00
e4efb66531
PR 13503
...
* config/tc-avr.c (exp_mod): Fix typo introduced in 1.82
from 2012-05-16.
2012-06-11 14:26:41 +00:00
c7a8dbf91f
opcodes/
...
* ppc-opc.c (lvsl, lvebx, isellt, icbt, ldepx, lwepx, lvsr, lvehx)
(iselgt, lvewx, iseleq, isel, dcbst, dcbstep, dcbfl, dcbf, lbepx)
(lvx, dcbfep, dcbtstls, stvebx, dcbtstlse, stdepx, stwepx, dcbtls)
(stvehx, dcbtlse, stvewx, stbepx, icblc, stvx, dcbtstt, dcbtst)
(dcbtst, dcbtstep, dcbtt, dcbt, dcbt, lhepx, eciwx, dcbtep)
(dcread, lxvdsx, lvxl, dcblc, sthepx, ecowx, dcbi, dcread, icbtls)
(stvxl, lxsdx, lfdepx, stxsdx, stfdepx, dcba, dcbal, lxvw4x)
(tlbivax, lfdpx, lxvd2x, tlbsrx., stxvw4x, tlbsx, tlbsx., stfdpx)
(stfqx, stxvd2x, icbi, icbiep, icread, dcbzep): Change RA to RA0.
gas/testsuite/
* gas/ppc/e500mc.d: Update.
* gas/ppc/476.d: Update.
2012-06-11 08:20:43 +00:00
d2ae702c46
Allocate sufficient space for string buffer
...
* input-scrub.c (input_scrub_include_sb): Use sb_build to
allocate sufficient space for from_sb. Use sb_terminate to
terminate string.
* read.c (read_a_source_file): Use sb_build to allocate
sufficient space and replace sb_add_string with sb_add_buffer.
(s_macro): Likewise.
(input_scrub_insert_line): Likewise.
(s_irp): Use sb_build to allocate sufficient space.
(do_repeat): Use sb_build to allocate sufficient space
for many.
* sb.c (sb_build): Remove static.
* sb.h (sb_build): New prototype.
2012-06-09 13:22:00 +00:00
5197bfb548
* sb.c: Include limits.h.
...
(dsize): Delete.
(MALLOC_OVERHEAD, INIT_ALLOC): Define.
(sb_new): Use INIT_ALLOC.
(sb_check): Modify allocation strategy using MALLOC_OVERHEAD.
(sb_terminate): Don't use sb_add_char.
2012-06-09 08:32:43 +00:00
c22faadb1a
Move gas/all/rept.[ds] to gas/i386
...
* gas/all/gas.exp: Don't run rept.
* gas/all/rept.d: Moved to ...
* gas/i386/rept.d: Here.
* gas/all/rept.s: Moved to ...
* gas/i386/rept.s: Here.
* gas/i386/i386.exp: Run rept.
2012-06-07 14:52:42 +00:00
918e92bee9
Add a testcase for PR gas/14201
...
PR gas/14201
* gas/all/gas.exp: Run rept.
* gas/all/rept.d: New file.
* gas/all/rept.s: Likewise.
2012-06-07 13:47:14 +00:00
39a45edc07
PR gas/14201
...
* sb.h (sb_max_power_two): Delete.
(struct sb): Delete "item" and "pot". Make "len" a size_t. Add "max".
(sb_element): Delete.
(sb_add_char, sb_add_buffer, sb_skip_comma, sb_skip_write): Update
prototypes.
* sb.c (string_count, free_list): Delete.
(sb_build, sb_kill, sb_check): Rewrite.
(scrub_from_sb, sb_add_char, sb_add_string, sb_add_buffer,
sb_skip_white, sb_skip_comma): Replace assorted int params,
vars and return types with size_t.
* input-scrub.c: Likewise.
* macro.c: Likewise.
* macro.h: Likewise.
* as.c: Likewise.
* as.h: Likewise.
* input-file.h: Likewise.
* input-file.c: Likewise.
* read.c: Likewise.
* app.c: ..or ptrdiff_t.
* input-file.c (input_file_get): Use ferror.
(input_file_give_next_buffer): Use input_file_get.
2012-06-07 12:47:23 +00:00
19f55fe4ff
gas/
...
* tc-xgate.c (md_begin): Refactored code.
2012-05-31 22:10:53 +00:00
d416e51da0
gas/
...
* read.c [HANDLE_BUNDLE] (bundle_lock_depth): New variable.
(read_a_source_file) [HANDLE_BUNDLE]: Reset it.
[HANDLE_BUNDLE] (s_bundle_lock, s_bundle_unlock): Allow nested
pairs.
gas/testsuite/
* gas/i386/bundle-bad.s: Remove nested .bundle_lock case.
* gas/i386/bundle-bad.l: Remove expected error line.
* gas/i386/bundle-lock.s: Add nested .bundle_lock case.
* gas/i386/bundle-lock.d: Update expectations.
2012-05-29 16:32:11 +00:00
7bfd842d05
* read.c (read_symbol_name): New function. Reads a symbol names.
...
Allows escape codes in names.
(s_comm_internal): Use read_symbol_name.
(s_globl, s_lsym, s_set, s_weakref): Likewise.
* doc/as.texinfo: Document support for multibyte characters in
symbol names.
* gas/elf/syms.s: New test - checks the generation of multibyte
symbol names.
* gas/elf/syms.d: New file - expected readelf output.
* gas/elf/elf.exp: Add syms.
* readelf.c (print_symbol): Display multibyte characters in symbol
names.
(process_section_headers): Use print_symbol.
* ld-ifunc/ifunc-13a-i386.s: Fix use of .global directive.
* ld-ifunc/ifunc-15a-i385.s: Likewise.
2012-05-28 14:20:19 +00:00
16224acd5c
* gas/lns/lns-big-delta.s: Add nops.
...
* gas/lns/lns-big-delta.d: Update.
2012-05-24 15:36:33 +00:00
95bfe26e6b
gas: mips: fix segfault with invalid default cpu strings
...
If you configure gas for a mips32el-* target, the default cpu calculation
gets mangled, and we end up passing and invalid value as the default cpu.
If you try executing gas after that, it segfaults. This is because it
assumes that the default cpu value is always valid.
$ ./gas/as-new
Assembler messages:
Error: Bad value (2) for default CPU
Segmentation fault (core dumped)
I'm not debating that the target tuple is valid, just that gas shouldn't
crash. So add a friendly assert to avoid that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-05-22 01:55:16 +00:00
50c374809b
* gas/tic6x/unwind-1.d: Update for readelf changes.
...
* gas/tic6x/unwind-2.d: Likewise.
* gas/tic6x/unwind-3.d: Likewise.
2012-05-19 10:37:46 +00:00
59365e1917
* config/obj-elf.c (obj_elf_section): Cater for TC_KEEP_OPERAND_SPACES
...
targets when checking for "comdat".
2012-05-19 10:36:32 +00:00
f3719d90a6
* config/tc-dlx.c (s_proc): Don't use asprintf.
2012-05-18 23:21:49 +00:00
74cda0c4ba
* config/tc-dlx.c (s_proc): Avoid warning about ignoring asprintf
...
return value.
2012-05-18 05:48:50 +00:00
d6ed37ed5c
* config/tc-ppc.c: Don't capitalise error and warning messages.
...
(md_parse_option): Add checks for -a32 -mvle.
2012-05-18 05:42:24 +00:00
222661cb8e
* config/obj-evax.c: Include as.h first.
2012-05-18 05:32:03 +00:00
f2c621e45e
bfd/
...
* aclocal.m4: Regenerate.
* Makefile.in: Regenerate.
binutils/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
gas/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
2012-05-17 22:23:42 +00:00
046e56f784
Expect addend as signed
...
binutils/testsuite/
* binutils-all/hppa/objdump.exp: Expect addend as signed.
gas/testsuite/
* gas/all/weakref1.d: Expect addend as signed.
* gas/arm/pic_vxworks.d: Likewise.
* gas/arm/wince.d: Likewise.
* gas/h8300/h8300.exp: Likewise.
* gas/i386/sub.d: Likewise.
* gas/mips/ecoff@ld.d: Likewise.
* gas/mips/ecoff@sd.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/l_d.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/mips1@l_d.d: Likewise.
* gas/mips/mips1@ld-forward.d: Likewise.
* gas/mips/mips1@ld.d: Likewise.
* gas/mips/mips1@s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mmix/bz-c.d: Likewise.
* gas/mmix/geta-c.d: Likewise.
* gas/mmix/jump-c.d: Likewise.
* gas/mmix/pushj-c.d: Likewise.
* gas/mmix/pushj-cs.d: Likewise.
* gas/mmix/reloc16-n.d: Likewise.
* gas/mmix/reloc16-r.d: Likewise.
* gas/mmix/reloc16.d: Likewise.
* gas/mmix/reloc8-r.d: Likewise.
* gas/mmix/reloc8.d: Likewise.
* gas/mmix/relocxrn.d: Likewise.
* gas/sh/sh64/case-1.d: Likewise.
* gas/sh/sh64/mix-1.d: Likewise.
* gas/sh/sh64/pt32-1.d: Likewise.
* gas/sh/sh64/pt64-1.d: Likewise.
* gas/sh/sh64/pt64-32-2.d: Likewise.
* gas/sh/sh64/rel32-2.d: Likewise.
* gas/sh/sh64/rel32-4.d: Likewise.
* gas/sh/sh64/rel64-2.d: Likewise.
* gas/sh/sh64/rel64-4.d: Likewise.
* gas/tic6x/data-reloc.d: Likewise.
* gas/tic6x/pcr-relocs.d: Likewise.
* gas/xstormy16/allinsn.d: Likewise.
* gas/xstormy16/reloc-1.d: Likewise.
* gas/xstormy16/reloc-2.d: Likewise.
ld/testsuite/
* ld-arm/emit-relocs1-vxworks.d: Expect addend as signed.
* ld-spu/pic.d: Likewise.
2012-05-17 16:36:22 +00:00
df7b86aa4c
PR 14072
...
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
2012-05-17 15:13:28 +00:00
7282333f3d
binutils/
...
* dwarf.c (process_debug_info): Display abbrev offset in hex.
(display_debug_abbrev): Show offset of abbrev.
binutils/testsuite/
* binutils-all/objdump.W: Update.
* binutils-all/readelf.wa: Update.
* binutils-all/i386/compressed-1a.d: Update.
* binutils-all/x86-64/compressed-1a.d: Update.
gas/testsuite/
* gas/elf/dwarf2-1.d: Update.
* gas/elf/dwarf2-2.d: Update.
* gas/i386/dw2-compress-1.d: Update.
2012-05-17 10:00:37 +00:00
d9fa356624
* gas/ppc/vle.d: Pass -a32 to assembler.
...
* gas/ppc/vle-reloc.d: Likewise.
* gas/ppc/vle-simple-1.d: Likewise, also match wider addresses.
* gas/ppc/vle-simple-2.d: Likewise.
* gas/ppc/vle-simple-3.d: Likewise.
* gas/ppc/vle-simple-4.d: Likewise.
* gas/ppc/vle-simple-5.d: Likewise.
* gas/ppc/vle-simple-6.d: Likewise.
2012-05-17 07:03:20 +00:00
a0f49396fd
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma,
...
bfd_get_section_lma, bfd_get_section_alignment,
bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
in order to use the `bfd' argument.
* bfd-in2.h: Regenerate.
* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
as the first argument for `bfd_get_section_alignment'.
* elf32-arm.c (create_ifunc_sections): Likewise, for
`bfd_set_section_alignment'.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
`bfd_get_section_name'.
* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
`bfd_get_section_vma'.
* elf64-ppc.c (create_linkage_sections): Likewise, for
`bfd_set_section_alignment'.
* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
as the first argument for `bfd_get_section_name'.
* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
as the first argument for `bfd_get_section_vma'.
2012-05-16 16:38:29 +00:00
536695d0f7
PR gas/14082
...
* app.c (do_scrub_chars): Prevent possible out of bounds access to
lex[] array.
2012-05-16 15:25:30 +00:00
40551fb82e
PR 13503
...
* reloc.c: Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(avr_reloc_map): Ditto.
* config/tc-avr.c (avr_cons_fix_new): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(exp_mod_data) Ditto. And replace "hhi8" with "hlo8".
(md_apply_fix): Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
* avr.h (RELOC_NUMBERS): Rename R_AVR_8_HHI8 to R_AVR_8_HLO8.
2012-05-16 14:52:16 +00:00
101af531fe
* arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
...
to PUSH/POP {reg}.
* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.
* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer. Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.
2012-05-16 10:53:49 +00:00
c1c30076b2
* config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
...
51qm variants.
2012-05-16 10:26:47 +00:00
43a028780f
Rewrote a loop that caused a seg fault on Windows systems.
2012-05-15 18:34:23 +00:00
6927f98292
* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
...
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.
* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.
* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.
* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.
* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.
* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.
2012-05-15 12:55:51 +00:00
918edac337
* config/rx-parse.y (rx_range): declare.
...
(O1,O2,O3,O4): Add calls to rx_range.
(UO1,UO2,UO3): Likewise.
(IMM2,IMMB): Likewise.
(rx_range): New.
2012-05-15 03:23:37 +00:00
0e25bcb440
* config/tc-rx.c (rx_fetchalign): Declare.
...
(md_pseudo_table): Add .fetchalign.
(RX_NBASE_FETCHALIGN): New.
(fetchalign_bytes): New.
(rx_fetchalign): New.
(rx_frag_init): If a "magic" value is found, also init the
machine-specific data.
(md_assemble): Note following opcode size if called for.
(rx_next_opcode): New.
(rx_relax_frag): Support .fetchalign.
(md_convert_frag): Likewise.
* doc/c-rx.texi (RX-Directives): Add .fetchalign.
2012-05-15 03:04:47 +00:00
b9c361e0ad
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
27d799802a
Expect addend as signed
...
* gas/cris/rd-pic-1.d: Expect addend as signed.
* gas/cris/rd-tls-1.d: Likewise.
* gas/cris/rd-tls-2.d: Likewise.
2012-05-14 12:23:14 +00:00
343dbc36ff
Print addend as signed in objdump
...
binutils/
* objdump.c (disassemble_bytes): Print addend as signed.
(dump_reloc_set): Likewise.
gas/testsuite/
* gas/all/fwdexp.d: Expect addend as signed.
* gas/alpha/elf-reloc-1.d: Likewise.
* gas/i386/mixed-mode-reloc64.d: Likewise.
* gas/i386/reloc64.d: Likewise.
* gas/i386/ilp32/mixed-mode-reloc64.d: Expect addend as signed.
* gas/i386/ilp32/reloc64.d: Likewise.
* gas/ia64/pcrel.d: Likewise.
* gas/mips/branch-misc-2-64.d: Likewise.
* gas/mips/branch-misc-2pic-64.d: Likewise.
* gas/mips/branch-misc-4-64.d: Likewise.
* gas/mips/ldstla-n64-sym32.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/mips16-hilo-n32.d: Likewise.
* gas/ppc/astest.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* gas/sparc/reloc64.d: Likewise.
2012-05-14 02:40:00 +00:00
9920b1ee65
Adjust testcases for readelf addend change
...
gas/testsuite/
* gas/mips/elf-rel10.d: Updated.
* gas/mips/elf-rel22.d: Likewise.
* gas/mmix/comment-1.d: Likewise.
ld/testsuite/
* ld-alpha/tlspic.rd: Updated.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/vxworks1-lib.rd: Likewise.
* ld-s390/tlspic.rd: Likewise.
* ld-s390/tlspic_64.rd: Likewise.
* ld-sh/shared-1.d: Likewise.
* ld-sh/tlspic-2.d: Likewise.
* ld-sparc/tlssunnopic32.rd: Likewise.
* ld-sparc/tlssunnopic64.rd: Likewise.
* ld-sparc/tlssunpic32.rd: Likewise.
* ld-sparc/tlssunpic64.rd: Likewise.
2012-05-12 13:46:26 +00:00
56e63005cd
Remove x32 addend overflow for BFD_RELOC_64
...
gas/
* config/tc-i386.c (tc_gen_reloc): Remove x32 addend overflow
for BFD_RELOC_64.
gas/testsuite/
* gas/i386/ilp32/ilp32.exp: Don't run reloc64-inval.
* gas/i386/ilp32/reloc64.s: Add test for -4294967295 addend.
* gas/i386/ilp32/reloc64.d: Updated.
* gas/i386/ilp32/reloc64-inval.l: Removed.
* gas/i386/ilp32/reloc64-inval.s: Likewise.
2012-05-12 12:34:37 +00:00
208a4923ed
PR binutils/14028
...
* configure.in: Invoke ACX_HEADER_STRING.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: If STRINGS_WITH_STRING is defined then include both
string.h and strings.h.
2012-05-11 14:25:30 +00:00
99700d6feb
PR 13503
...
* reloc.c: Add new ENUM for BFD_RELOC_AVR_8_LO,
BFD_RELOC_AVR_8_HI, BFD_RELOC_AVR_8_HHI.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Add entries for
R_AVR_8_LO8, R_AVR_8_HI8, R_AVR_8_HHI8.
(avr_reloc_map): Add RELOC mappings for R_AVR_8_LO8, R_AVR_8_HI8,
R_AVR_8_HHI8.
* config/tc-avr.c (exp_mod_pm): Remove variable.
(exp_mod_data_t): New typedef.
(pexp_mod_data, exp_mod_data): New variables.
(avr_parse_cons_expression): Scan through exp_mod_data[] to find
data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
(avr_cons_fix_new): Handle new data expression modifiers shipped
in pexp_mod_data.
(md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
BFD_RELOC_AVR_8_HHI.
* elf/avr.h (RELOC_NUMBERS): Add values for R_AVR_8_LO8,
R_AVR_8_HI8, R_AVR_8_HHI8.
2012-05-11 12:59:23 +00:00
268a8d3ac4
Use int and bfd_signed_vma in x32 addend overflow check
...
bfd/
* elf64-x86-64.c (elf_x86_64_relocate_section): Use int in x32
addend overflow check.
gas/
* config/tc-i386.c (tc_gen_reloc): Use bfd_signed_vma in x32
addend overflow check.
2012-05-11 00:50:43 +00:00
6f2c9068ed
Display signed hex number in x32 addend overflow check
...
bfd/
* elf64-x86-64.c (elf_x86_64_relocate_section): Display signed
hex number in x32 addend overflow check.
gas/
* config/tc-i386.c (tc_gen_reloc): Display signed hex number in
x32 addend overflow check.
ld/testsuite/
* ld-x86-64/ilp32-11.d: Updated.
2012-05-10 20:46:34 +00:00
83acd3e879
Use fits_in_signed_long to check x32 addend overflow
...
* config/tc-i386.c (tc_gen_reloc): Use fits_in_signed_long.
2012-05-10 03:48:33 +00:00
8cf0d2dd21
Check 64-bit relocation addend overflow for x32
...
bfd/
* elf64-x86-64.c (elf_x86_64_relocate_section): Check addend
overflow for R_X86_64_RELATIVE64.
gas/
* config/tc-i386.c (tc_gen_reloc): Check x32 addend overflow
for BFD_RELOC_64.
gas/testsuite/
* gas/i386/ilp32/ilp32.exp: Run reloc64-inval.
* gas/i386/ilp32/reloc64.s: Add tests for ".quad".
* gas/i386/ilp32/reloc64.d: Updated.
* gas/i386/ilp32/reloc64-inval.l: New file.
* gas/i386/ilp32/reloc64-inval.s: Likewise.
ld/testsuite/
* ld-x86-64/ilp32-11.d: New file.
* ld-x86-64/ilp32-11.s: Likewise.
* ld-x86-64/x86-64.exp: Run ilp32-11.
2012-05-10 03:25:17 +00:00
4aee77982d
* lib/gas-defs.exp (run_dump_test): Don't set LC_ALL here.
2012-05-08 12:15:06 +00:00
e5b62927f4
* Makefile.am (check_DEJAGNU): Export LC_ALL=C in place of other
...
LC and LANG environment vars.
* Makefile.in: Regenerate.
2012-05-08 12:14:15 +00:00
cce3d66c34
* Makefile.am (check-DEJAGNU): Clear LC_COLLATE, LC_ALL and LANG.
...
* Makefile.in: Regenerate.
2012-05-07 09:21:48 +00:00
35c011e316
2012-05-06 Arnold Metselaar <arnold_m@operamail.com>
...
* gas/z80/jr-forwf.s: New file, adapted from z8k version.
* gas/z80/jr-backf.s: Likewise.
* gas/z80/djnz-backf.s: Likewise.
* gas/z80/ill_op: New file, with illegal operand.
* gas/z80/z80.exp: Run new tests.
2012-05-06 10:56:25 +00:00
25045f7922
2012-05-06 Arnold Metselaar <arnold_m@operamail.com>
...
* config/tc-z80.h(md_register_arithmetic): Define as 0.
* config/tc-z80.c(md_begin): Store register names in symbol table, prevents usage as ordinary symbol.
* config/tc-z80.c(contains_register): New function.
* config/tc-z80.c(parse_exp2): Removed.
* config/tc-z80.c(parse_exp_not_indexed): New function.
* config/tc-z80.c(parse_exp): Add code to recogize indexed addressing after parsing.
* config/tc-z80.c(emit_byte, emit_word): Use contains_register.
* config/tc-z80.c(emit_jp): Use parse_exp_not_indexed, simplify condition for jump to register.
* config/tc-z80.c(emit_call, emit_jr, emit_ex, emit_rst): Use parse_exp_not_indexed.
2012-05-06 09:49:21 +00:00
45dfa85a1e
Replace all uses of bfd_abs_section, bfd_com_section, bfd_und_section
...
and bfd_ind_section with their _ptr variants, or use corresponding
bfd_is_* macros.
2012-05-05 03:05:32 +00:00
3c99554527
Support x86_64-*-linux-gnux32
...
gas/
* configure.tgt: Support x86_64-*-linux-gnux32.
ld/
* configure.tgt: Support x86_64-*-linux-gnux32.
ld/testsuite/
* ld-elf/eh1.d: Skip x86_64-*-linux-gnux32.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.
* ld-elfvsb/elfvsb.exp: Xfail x86_64-*-linux-gnux32.
* ld-shared/shared.exp: Likewise.
* ld-ifunc/ifunc-3a-x86.d: Support x86_64-*-linux-gnux32.
2012-05-04 20:01:03 +00:00
35262a230c
Add `instruction' to unsupported error message
...
* config/tc-i386.c (match_template): Add `instruction' to
unsupported error message.
2012-05-04 19:18:02 +00:00
89e71f5c88
Reformat output_insn
...
* config/tc-i386.c (output_insn): Reformat.
2012-05-04 19:11:04 +00:00
ae5c1c7b1d
Remove the extra VEX check
...
* config/tc-i386.c (output_insn): Remove the extra VEX check.
2012-05-04 18:06:38 +00:00
10efe3f6ab
Improve unsupported error message
...
* config/tc-i386.c (match_template): Improve unsupported error
message.
2012-05-04 17:55:38 +00:00
f6c1a2d592
Add support for Motorola XGATE embedded CPU
2012-05-03 13:12:08 +00:00
cad335c901
* config/rx-parse.y (rx_intop): Add parameter for operation size.
...
Check for large positive constants really being small negative
ones.
(BRA, BSR): Update calls to rx_intop.
(immediate): Likewise.
2012-04-30 22:09:09 +00:00
88ebb0a156
gas: Make dwarf2dbg.c versions specific and add DW_AT_high_pc case for DWARF 4+.
...
* dwarf2dbg.c (DWARF2_ARANGES_VERSION): New define to 2.
(DWARF2_LINE_VERSION): Likewise.
(out_debug_line): Use DWARF2_LINE_VERSION not DWARF2_VERSION.
(out_debug_aranges): Use DWARF2_ARANGES_VERSION not DWARF2_VERSION.
(out_debug_abbrev): Use DW_FORM_data for DW_AT_high_pc when
DWARF2_VERSION >= 4.
(out_debug_info): Use difference between start and end as data
value for DW_AT_high_pc when DWARF2_VERSION >= 4.
* config/tc-ia64.h (DWARF2_LINE_VERSION): Override it.
2012-04-30 14:32:28 +00:00
2755f698e1
Document sparc's %l34 and %h34
...
gas/
* doc/c-sparc.text: Document %l34 and %h34.
2012-04-27 20:45:23 +00:00
2e52845baf
Add support for sparc %cfr ASR register.
...
opcodes/
* sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
* sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
gas/
* config/tc-sparc.c (v9a_asr_table): Add 'cfr'.
gas/testsuite/
* gas/sparc/sparc.exp: Run cfr test.
* gas/sparc/cfr.s: New testcase.
* gas/sparc/cfr.d: Likewise.
2012-04-27 20:43:35 +00:00
58004e23c9
Add support for sparc pause instruction.
...
opcodes/
* sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
* sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
gas/
* config/tc-sparc.c (sparc_arch_table): Add HWCAP_PAUSE to sparc4,
v8pluse, v8plusv, v9e, and v9v.
(v9a_asr_table): Add 'pause'.
gas/testsuite/
* gas/sparc/sparc.exp: Run pause test.
* gas/sparc/pause.s: New testcase.
* gas/sparc/pause.d: Likewise.
2012-04-27 18:04:00 +00:00
698544e152
Add support for sparc compare-and-branch instructions.
...
opcodes/
* sparc-opc.c (CBCOND): New define.
(CBCOND_XCC): Likewise.
(cbcond): New helper macro.
(sparc_opcodes): Add compare-and-branch instructions.
gas/
* config/tc-sparc.c (sparc_arch_table): Add HWCAP_CBCOND to
sparc4, v8pluse, v8plusv, v9e, and v9v.
(sparc_ip): Handle R_SPARC_5 of immediate constants inline in
order to accomodate cbcond which otherwise would require two
relocations to be handled in a single instruction..
gas/testsuite/
* gas/sparc/cbcond.s: New file.
* gas/sparc/cbcond.d: New file.
* gas/sparc/sparc.exp: Run cbcond test.
2012-04-27 18:03:13 +00:00
6cda13266f
Add support for SPARC T4 crypto instructions.
...
include/opcode/
* sparc.h: Document new arg code' )' for crypto RS3
immediates.
opcodes/
* sparc-dis.c (print_insn_sparc): Handle ')'.
* sparc-opc.c (sparc_opcodes): Add crypto instructions.
gas/
* config/tc-sparc.c (sparc_ip): Likewise. Accept instruction
names containing "_".
(sparc_arch_table): Add sparc4, v8pluse, and v9e. Add crypto
hwcap masks to v8plusv and v9v.
gas/testsuite/
* gas/sparc/crypto.s: New file.
* gas/sparc/crypto.d: New file.
* gas/sparc/sparc.exp: Run crypto test.
2012-04-27 18:02:35 +00:00
ec668d69b9
Move sparc opcode hwcaps out of sparc_opcode flags field.
...
include/opcode/
* sparc.h (struct sparc_opcode): New field 'hwcaps'.
F_MUL32, F_DIV32, F_FDMULD, F_V8PLUS, F_POPC, F_VIS, F_VIS2,
F_ASI_BLK_INIT, F_FMAF, F_VIS3, F_HPC, F_RANDOM, F_TRANS,
F_FJFMAU, F_IMA, F_ASI_CACHE_SPARING, F_HWCAP_MASK): Delete.
(HWCAP_MUL32, HWCAP_DIV32, HWCAP_FSMULD, HWCAP_V8PLUS, HWCAP_POPC,
HWCAP_VIS, HWCAP_VIS2, HWCAP_ASI_BLK_INIT, HWCAP_FMAF,
HWCAP_VIS3, HWCAP_HPC, HWCAP_RANDOM, HWCAP_TRANS, HWCAP_FJFMAU,
HWCAP_IMA, HWCAP_ASI_CACHE_SPARING, HWCAP_AES, HWCAP_DES,
HWCAP_KASUMI, HWCAP_CAMELLIA, HWCAP_MD5, HWCAP_SHA1,
HWCAP_SHA256, HWCAP_SHA512, HWCAP_MPMUL, HWCAP_MONT, HWCAP_PAUSE,
HWCAP_CBCOND, HWCAP_CRC32): New defines.
opcodes/
* sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
gas/
* config/tc-sparc.c (sparc_arch_table): Rework to use HWCAP_*
masks.
(sparc_md_end): No longer need to translate hwcap_seen values into
ELF hwcap bits, they now match exactly.
(get_hwcap_name): Use HWCAP_* and handle new values.
(sparc_ip): Fetch hwcaps from insn->hwcaps instead of insn->flags.
2012-04-27 18:01:35 +00:00
2b0bc50148
2012-04-20 Tristan Gingold <gingold@adacore.com>
...
* config/tc-ia64.c (obj_elf_vms_common): New function.
(md_pseudo_table): Add .vms_common pseudo.
* config/obj-elf.h (obj_elf_section_name): Add a prototype.
* config/obj-elf.c (obj_elf_section_name): Make it public.
2012-04-20 10:21:33 +00:00
0b649256e3
gas/
...
* config/tc-avr.c (md_apply_fix): Fix handling of BFD_RELOC32.
2012-04-17 13:59:41 +00:00
2615994e91
Support R_SPARC_WDISP10 and R_SPARC_H34.
...
include/
* elf/sparc.h (R_SPARC_WDISP10): New reloc.
* opcode/sparc.h: Define '=' as generating R_SPARC_WDISP10.
opcodes/
* sparc-dis.c (X_DISP10): Define.
(print_insn_sparc): Handle '='.
bfd/
* reloc.c (BFD_RELOC_SPARC_H34, BFD_RELOC_SPARC_SIZE32,
BFD_RELOC_SPARC_SIZE64, BFD_RELOC_SPARC_WDISP10): New relocs.
* libbfd.h: Regenerate.
* bfd-in2.h: Likewise.
* elfxx-sparc.c (sparc_elf_wdisp10_reloc): New function.
(_bfd_sparc_elf_howto_table): Add entries for R_SPARC_H34,
R_SPARC_SIZE32, R_SPARC_64, and R_SPARC_WDISP10.
(_bfd_sparc_elf_reloc_type_lookup): Handle new relocs.
(_bfd_sparc_elf_check_relocs): Likewise.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
gas/
* config/tc-sparc.c (sparc_ip): Handle '=', "%h34", "%l34", and
BFD_RELOC_SPARC_H34.
(md_apply_fix): Handle BFD_RELOC_SPARC_WDISP10 and BFD_RELOC_SPARC_H34.
(tc_gen_reloc): Likewise.
gas/testsuite/
* gas/sparc/reloc64.s: Add abs34 code model tests.
* gas/sparc/reloc64.d: Update.
elfcpp/
* sparc.h (R_SPARC_WDISP10): New relocation.
gold/
* sparc.cc (Reloc::wdisp10): New relocation method.
(Reloc::h34): Likewise.
(Target_sparc::Scan::check_non_pic): Handle R_SPARC_H34.
(Target_sparc::Scan::get_reference_flags): Handle R_SPARC_H34 and
R_SPARC_WDISP10.
(Target_sparc::Scan::local): Likewise.
(Target_sparc::Scan::global): Likewise.
(Target_sparc::Relocate::relocate): Likewise.
2012-04-12 16:26:06 +00:00
b38cadfb70
* elf32-arm.c (elf32_arm_nacl_plt0_entry, elf32_arm_nacl_plt_entry):
...
New variables.
(struct elf32_arm_link_hash_table): New member `nacl_p'.
(elf32_arm_link_hash_table_create): Initialize it.
(elf32_arm_nacl_link_hash_table_create): New function.
(arm_movw_immediate, arm_movt_immediate): New functions.
(elf32_arm_populate_plt_entry): Test HTAB->nacl_p.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_output_plt_map_1): Likewise.
(bfd_elf32_littlearm_nacl_vec, bfd_elf32_bigarm_nacl_vec):
New backend vector stanza.
(elf32_arm_nacl_modify_segment_map): New function.
* config.bfd: Handle arm-*-nacl*, armeb-*-nacl*.
* targets.c: Support bfd_elf32_{big,little}_nacl_vec.
* configure.in: Likewise.
(bfd_elf32_bigarm_nacl_vec): Add elf-nacl.lo here.
(bfd_elf32_littlearm_nacl_vec): Likewise.
(bfd_elf32_bigarm_vec, bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerated.
* configure.tgt (arm-*-nacl*): Match it.
* config/te-nacl.h (FPU_DEFAULT, EABI_DEFAULT): Define.
(LOCAL_LABELS_DOLLAR): Define.
* config/tc-arm.c (elf32_arm_target_format) [TE_NACL]:
Use nacl format variants.
* gas/elf/elf.exp (run_elf_list_test): Treat arm-*-nacl* targets
as -armeabi.
* gas/arm/any-idiv.d: Match *-*-nacl* targets too.
* gas/arm/arch4t.d: Likewise.
* gas/arm/arch4t-eabi.d: Likewise.
* gas/arm/attr-any-armv4t.d: Likewise.
* gas/arm/attr-any-thumbv6.d: Likewise.
* gas/arm/attr-cpu-directive.d: Likewise.
* gas/arm/attr-default.d: Likewise.
* gas/arm/attr-march-all.d: Likewise.
* gas/arm/attr-march-armv1.d: Likewise.
* gas/arm/attr-march-armv2a.d: Likewise.
* gas/arm/attr-march-armv2.d: Likewise.
* gas/arm/attr-march-armv2s.d: Likewise.
* gas/arm/attr-march-armv3.d: Likewise.
* gas/arm/attr-march-armv3m.d: Likewise.
* gas/arm/attr-march-armv4.d: Likewise.
* gas/arm/attr-march-armv4t.d: Likewise.
* gas/arm/attr-march-armv4txm.d: Likewise.
* gas/arm/attr-march-armv4xm.d: Likewise.
* gas/arm/attr-march-armv5.d: Likewise.
* gas/arm/attr-march-armv5t.d: Likewise.
* gas/arm/attr-march-armv5te.d: Likewise.
* gas/arm/attr-march-armv5tej.d: Likewise.
* gas/arm/attr-march-armv5texp.d: Likewise.
* gas/arm/attr-march-armv5txm.d: Likewise.
* gas/arm/attr-march-armv6.d: Likewise.
* gas/arm/attr-march-armv6j.d: Likewise.
* gas/arm/attr-march-armv6k.d: Likewise.
* gas/arm/attr-march-armv6k+sec.d: Likewise.
* gas/arm/attr-march-armv6kt2.d: Likewise.
* gas/arm/attr-march-armv6-m.d: Likewise.
* gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/arm/attr-march-armv6s-m.d: Likewise.
* gas/arm/attr-march-armv6t2.d: Likewise.
* gas/arm/attr-march-armv6z.d: Likewise.
* gas/arm/attr-march-armv6zk.d: Likewise.
* gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/arm/attr-march-armv7-a.d: Likewise.
* gas/arm/attr-march-armv7a.d: Likewise.
* gas/arm/attr-march-armv7-a+idiv.d: Likewise.
* gas/arm/attr-march-armv7-a+mp.d: Likewise.
* gas/arm/attr-march-armv7-a+sec.d: Likewise.
* gas/arm/attr-march-armv7-a+sec+virt.d: Likewise.
* gas/arm/attr-march-armv7-a+virt.d: Likewise.
* gas/arm/attr-march-armv7.d: Likewise.
* gas/arm/attr-march-armv7em.d: Likewise.
* gas/arm/attr-march-armv7-m.d: Likewise.
* gas/arm/attr-march-armv7m.d: Likewise.
* gas/arm/attr-march-armv7-r.d: Likewise.
* gas/arm/attr-march-armv7r.d: Likewise.
* gas/arm/attr-march-armv7-r+mp.d: Likewise.
* gas/arm/attr-march-iwmmxt2.d: Likewise.
* gas/arm/attr-march-iwmmxt.d: Likewise.
* gas/arm/attr-march-xscale.d: Likewise.
* gas/arm/attr-mcpu.d: Likewise.
* gas/arm/attr-mfpu-arm1020e.d: Likewise.
* gas/arm/attr-mfpu-arm1020t.d: Likewise.
* gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
* gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
* gas/arm/attr-mfpu-arm7500fe.d: Likewise.
* gas/arm/attr-mfpu-fpa10.d: Likewise.
* gas/arm/attr-mfpu-fpa11.d: Likewise.
* gas/arm/attr-mfpu-fpa.d: Likewise.
* gas/arm/attr-mfpu-fpe2.d: Likewise.
* gas/arm/attr-mfpu-fpe3.d: Likewise.
* gas/arm/attr-mfpu-fpe.d: Likewise.
* gas/arm/attr-mfpu-maverick.d: Likewise.
* gas/arm/attr-mfpu-neon.d: Likewise.
* gas/arm/attr-mfpu-neon-fp16.d: Likewise.
* gas/arm/attr-mfpu-softfpa.d: Likewise.
* gas/arm/attr-mfpu-softvfp.d: Likewise.
* gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
* gas/arm/attr-mfpu-vfp10.d: Likewise.
* gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
* gas/arm/attr-mfpu-vfp3.d: Likewise.
* gas/arm/attr-mfpu-vfp9.d: Likewise.
* gas/arm/attr-mfpu-vfp.d: Likewise.
* gas/arm/attr-mfpu-vfpv2.d: Likewise.
* gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv3.d: Likewise.
* gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/arm/attr-mfpu-vfpxd.d: Likewise.
* gas/arm/attr-names.d: Likewise.
* gas/arm/attr-order.d: Likewise.
* gas/arm/attr-override-cpu-directive.d: Likewise.
* gas/arm/attr-override-mcpu.d: Likewise.
* gas/arm/got_prel.d: Likewise.
* gas/arm/mapdir.d: Likewise.
* gas/arm/mapmisc.d: Likewise.
* gas/arm/mapsecs.d: Likewise.
* gas/arm/mapshort-eabi.d: Likewise.
* gas/arm/mapshort-elf.d: Likewise.
* gas/arm/mov-highregs-any.d: Likewise.
* gas/arm/mov-lowregs-any.d: Likewise.
* gas/arm/pr12198-1.d: Likewise.
* gas/arm/pr12198-2.d: Likewise.
* gas/arm/thumb.d: Likewise.
* gas/arm/thumb-eabi.d: Likewise.
* gas/arm/thumbrel.d: Likewise.
* configure.tgt (arm*-*-nacl*, arm*b-*-nacl*): Handle them.
* emulparams/armelf_nacl.sh: New file.
* emulparams/armelfb_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add earmelf_nacl.c
and earmelfb_nacl.c here.
(earmelf_nacl.c, earmelfb_nacl.c): New targets.
* Makefile.in: Regenerated.
* ld-arm/arm-elf.exp (armelftests): Split out into ...
(armelftests_common, armelftests_nonacl): ... these two.
(armeabitests): Split out into ...
(armeabitests_common, armeabitests_nonacl): ... these two.
Omit _nonacl sets for arm*-*-nacl* targets.
* ld-arm/farcall-mix.d: Don't match exact addresses, only symbolic ones.
* ld-arm/farcall-mix2.d: Likewise.
* ld-arm/farcall-group.d: Likewise.
* ld-arm/tls-gdesc-got.d: Match variant file formats too.
Accept some variation in exact addresses.
* ld-arm/thumb2-b-interwork.d: Match variant file formats too.
Fix regexps not to care about exact addresses where not relevant.
* ld-arm/thumb2-bl-undefweak.d: Match any hex strings, not any
strings of particular exact lengths.
* ld-arm/thumb2-bl-undefweak1.d: Likewise.
* ld-arm/arm-app.r: Match variant file formats too.
* ld-arm/arm-app-abs32.r: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/arm-lib.r: Likewise.
* ld-arm/arm-static-app.r: Likewise.
* ld-arm/armv4-bx.d: Likewise.
* ld-arm/data-only-map.d: Likewise.
* ld-arm/group-relocs.d: Likewise.
* ld-arm/jump19.d: Likewise.
* ld-arm/reloc-boundaries.d: Likewise.
* ld-arm/thumb1-bl.d: Likewise.
* ld-arm/thumb2-bl.d: Likewise.
* ld-arm/tls-app.d: Likewise.
* ld-arm/tls-app.r: Likewise.
* ld-arm/tls-gdierelax.d: Likewise.
* ld-arm/tls-gdierelax2.d: Likewise.
* ld-arm/tls-gdlerelax.d: Likewise.
* ld-arm/tls-lib.d: Likewise.
* ld-arm/tls-lib.r: Likewise.
* ld-arm/tls-mixed.r: Likewise.
* ld-arm/vfp11-fix-none.d: Likewise.
* ld-arm/vfp11-fix-scalar.d: Likewise.
* ld-arm/vfp11-fix-vector.d: Likewise.
* ld-arm/arm-static-app.d: Likewise.
Fix regexps not to care about exact number of leading spaces.
* ld-arm/arm-app-abs32.d: Likewise.
* ld-arm/fix-arm1176-off.d: Likewise.
* ld-arm/fix-arm1176-on.d: Likewise.
* ld-arm/arm-elf.exp: Treat nacl targets like eabi targets.
2012-04-12 13:01:15 +00:00
465cb9fba7
oops - omitted from previous delta
2012-04-12 07:47:36 +00:00
6530b175a1
* config/tc-arm.c (only_one_reg_in_list): New function.
...
(encode_ldmstm): Ditto.
(do_ldmstm): Use a different encoding when pushing or poping
a single register.
(A_COND_MASK): New macro.
(A_PUSH_POP_OP_MASK): Ditto.
(A1_OPCODE_PUSH): Ditto.
(A2_OPCODE_PUSH): Ditto.
(A2_OPCODE_POP): Ditto.
* gas/arm/push-pop.d: New testcase.
* gas/arm/push-pop.s: Ditto.
* gas/arm/stm-ldm.d: Ditto.
* gas/arm/stm-ldm.s: Ditto.
2012-04-12 07:46:54 +00:00
be16f58925
gas/testsuite/
...
* gas/all/gas.exp: Sparc can handle BFD_RELOC_8 for constants.
ld/testsuite/
* ld-sparc/tlssunbin32.rd: Fix regexp.
* ld-sparc/tlssunbin64.rd: Likewise.
2012-04-07 14:16:35 +00:00
45e279f5d4
* doc/c-mips.texi (MIPS Opts): Correct -no-mfix-24k to
...
-mno-fix-24k.
2012-04-06 22:02:43 +00:00
5879767462
binutils/
...
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gas/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gold/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
ld/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-06 16:49:02 +00:00
443507505d
* configure.in (AC_CHECK_FUNCS): Add setlocale.
...
(AM_LC_MESSAGES): Add.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-05 08:43:41 +00:00
e91a22cece
* config/rx-parse.y: Make the .L optional for ADC and SBB.
2012-04-03 19:06:40 +00:00
5a68afcf73
bfd/
...
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-03 16:01:38 +00:00
b1c0804b2e
* config/rx-parse.y: IMM->IMM_, take an extra parameter for the
...
transfer size.
(IMM): New, call IMM_ with the default 32.
(IMMW,IMMB): Likewise, for 16 and 8.
(NIMM, MBIMM): Add size parameter.
(immediate): Likewise. Allow 32768..65535 for 16-bit transfers.
(MOV.W): Use IMMW instead of IMM.
* config/rx-parse.y (ADC,SBB): ADC and SBB only allow .L.
(op_dp20_rm_l): New.
(op_dp20_rim_l): New.
* config/rx-parse.y (op_dp20_rms): Rename to op_dp20_rr, don't allow mem.
(ABS, NEG, NOT): These only take REG or REG,REG (rr, not rms).
* gas/rx/mov.d: Update patterns for fixed MOV.W encoding.
2012-04-03 03:01:57 +00:00
ce32bd10df
2012-03-29 Terry Guo <terry.guo@arm.com>
...
* gas/config/tc-arm.c (arm_cpus): Add cortex-m0plus.
* gas/doc/c-arm.texi (ARM Options): Document -mcpu=cortex-m0plus.
2012-03-29 10:28:40 +00:00
55a36193d8
gas/
...
* config/tc-mips.c (mips_cpu_info_table): Add entry for Broadcom XLP.
* doc/c-mips.texi: Mention XLP.
opcodes/
* mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
2012-03-24 01:09:28 +00:00
32b9ff0d14
gas/
...
[SH] Support the .uaquad and .8byte directives also for non-sh64
configurations.
* config/tc-sh.c (sh_cons_fix_new, md_apply_fix) [!HAVE_SH64]: Handle
BFD_RELOC_64.
* doc/c-sh64.texi (SH64 Machine Directives): Move .uaquad
description...
* doc/c-sh.texi (SH Machine Directives): ... here.
2012-03-21 08:58:40 +00:00
7465e07a57
* config/tc-arm.c (do_vmrs): Accept priviledged mode VFP system
...
registers.
(do_vmsr): Likewise.
(arm_opcode_insns): Do not default to using the FPSCR register in
the VMRS and VMSR registers.
* gas/arm/vfp1xD.s: Add tests of the VMSR ad VMRS instructions in
priviledged modes.
* gas/arm/vfp1xD.d: Update expected output.
2012-03-20 11:55:07 +00:00
8059fb196e
bfd/
...
2012-03-16 Roland McGrath <mcgrathr@google.com>
* config.bfd: Handle x86_64-*-nacl*.
* elf64-x86-64.c (bfd_elf64_x86_64_nacl_vec): New backend vector stanza.
(bfd_elf32_x86_64_nacl_vec): Likewise.
* targets.c: Support them.
* configure.in: Likewise.
* configure: Regenerated.
gas/
2012-03-16 Roland McGrath <mcgrathr@google.com>
* config/tc-i386.h [TE_NACL] (ELF_TARGET_FORMAT32, ELF_TARGET_FORMAT64):
Define for this case.
* configure.tgt (i386-*-nacl*): If ${cpu} is x86_64*, default to x32.
2012-03-16 23:19:47 +00:00
692392805b
* gas/config/tc-arm.c (aeabi_set_public_attributes): Correct
...
handling of Tag_DIV_use.
* gas/testsuite/gas/testsuite/gas/arm/any-idiv.d: New testcase.
* gas/testsuite/gas/testsuite/gas/arm/any-idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-any-armv4t.d: Update expected output.
* gas/testsuite/gas/arm/attr-any-thumbv6.d: Likewise.
* gas/testsuite/gas/arm/attr-cpu-directive.d: Likewise.
* gas/testsuite/gas/arm/attr-default.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv1.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv2a.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv2s.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv3.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv3m.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv4.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv4t.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv4txm.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv4xm.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv5.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv5t.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv5te.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv5tej.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv5texp.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv5txm.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6j.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6k+sec.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6k.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6kt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6t2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6z.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zk.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7-a+mp.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7-a.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7a.d: Likewise.
* gas/testsuite/gas/arm/attr-march-iwmmxt.d: Likewise.
* gas/testsuite/gas/arm/attr-march-iwmmxt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-xscale.d: Likewise.
* gas/testsuite/gas/arm/attr-mcpu.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1020e.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1020t.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm7500fe.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-fpa.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-fpa10.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-fpa11.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-fpe.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-fpe2.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-fpe3.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-maverick.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-neon-fp16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-neon.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-softfpa.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-softvfp.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp10.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp3.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp9.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv2.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv3.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpxd.d: Likewise.
* gas/testsuite/gas/arm/attr-order.d: Likewise.
* gas/testsuite/gas/arm/attr-override-cpu-directive.d: Likewise.
* gas/testsuite/gas/arm/attr-override-mcpu.d: Likewise.
* gas/testsuite/gas/arm/eabi_attr_1.d: Likewise.
* gas/testsuite/gas/arm/mov-highregs-any.d: Likewise.
* gas/testsuite/gas/arm/mov-lowregs-any.d: Likewise.
* gas/testsuite/gas/arm/pr12198-1.d: Likewise.
* gas/testsuite/gas/arm/pr12198-2.d: Likewise.
* ld/testsuite/ld-arm/arm-elf.exp: Add new testcases.
* ld/testsuite/ld-arm/attr-merge-2.attr: Update ouput.
* ld/testsuite/ld-arm/attr-merge-2a.s: Remove Tag_DIV_use test.
* ld/testsuite/ld-arm/attr-merge-2b.s: Likewise.
* ld/testsuite/ld-arm/attr-merge-3.attr: Updated expected output.
* ld/testsuite/ld-arm/attr-merge-4.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-5.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-6.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-7.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-arch-1.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-arch-2.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-unknown-2.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-unknown-3.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-1.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-2.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-3.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-4.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-5.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-6.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-00.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-02.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-04.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-20.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-22.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-40.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-44.d: Likewise.
* ld/testsuite/ld-arm/attr-merge.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-0.s: New testcase.
* ld/testsuite/ld-arm/attr-merge-div-00.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-01.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-02.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-1.s: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-10.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-11.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-12.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-120.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-2.s: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-20.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-21.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-div-22.d: Likewise.
2012-03-16 14:02:33 +00:00
27dcf5c00e
gas/
...
* doc/as.texinfo (Bundle directives): Fix typo.
2012-03-15 11:19:13 +00:00
57b99c84f9
* gas/i386/bundle-lock.d: Ignore trailing nops.
...
* gas/i386/bundle.d: Likewise.
* gas/i386/x86-64-bundle.d: Likewise.
2012-03-15 01:36:29 +00:00
ec82c18e8a
Replace @defn with @dfn
...
2012-03-14 Ryan Mansfield <rmansfield@qnx.com>
* doc/as.texinfo (Bundle directives): Replace @defn with @dfn.
2012-03-14 17:51:16 +00:00
8d3eaee676
Fix up last commit.
2012-03-13 17:01:34 +00:00
fa94de6b5c
gas/
...
2012-03-12 Roland McGrath <mcgrathr@google.com>
* config/tc-arm.c (arm_frag_max_var): New function.
* config/tc-arm.h: Declare it.
(md_frag_max_var): New macro.
* config/tc-i386.c (i386_frag_max_var): New function.
* config/tc-i386.h: Declare it.
(md_frag_max_var): New macro.
* doc/as.texinfo (Bundle directives): New node.
(Pseudo Ops): Add it to the menu.
* NEWS: Mention new feature.
* read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
[HANDLE_BUNDLE] (bundle_align_p2): New variable.
[HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
[HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
New functions.
(assemble_one): New function if [HANDLE_BUNDLE], #define directly
to md_assembly if not.
(read_a_source_file): Call assemble_one in place of md_assemble.
(read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
.bundle_lock at end of processing.
[HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
New functions.
[HANDLE_BUNDLE] (potable): Add their entries.
* read.h: Declare new functions.
gas/testsuite/
2012-03-12 Roland McGrath <mcgrathr@google.com>
* gas/i386/bundle-bad.s: New file.
* gas/i386/bundle-bad.d: New file.
* gas/i386/bundle-bad.l: New file.
* gas/i386/i386.exp: Run it.
* gas/arm/bundle.s: New file.
* gas/arm/bundle.d: New file.
* gas/arm/bundle-lock.s: New file.
* gas/arm/bundle-lock.d: New file.
* gas/i386/bundle.s: New file.
* gas/i386/bundle.d: New file.
* gas/i386/x86-64-bundle.s: New file.
* gas/i386/x86-64-bundle.d: New file.
* gas/i386/bundle-lock.s: New file.
* gas/i386/bundle-lock.d: New file.
* gas/i386/i386.exp: Run them.
2012-03-13 16:59:57 +00:00
aea77599d0
include/opcode/
...
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-09 23:39:06 +00:00
5333187ab1
2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/esa-g5.d: Move length field to the second operand.
* gas/s390/esa-g5.s: Likewise.
2012-03-08 17:22:18 +00:00
0a22ae8eb5
* mn10300.h (elf_mn10300_reloc_type): Add R_MN10300_TLS_GD,
...
R_MN10300_TLS_LD, R_MN10300_TLS_LDO, R_MN10300_TLS_GOTIE,
R_MN10300_TLS_IE, R_MN10300_TLS_LE, R_MN10300_TLS_DPTMOD,
R_MN10300_TLS_DTPOFF and R_MN10300_TLS_TPOFF.
* elf-m10300.c (elf32_mn10300_link_hash_entry): Add tls_type
field.
(elf32_mn10300_link_hash_table): Add tls_ldm_got entry;
(elf_mn10300_tdata): Define.
(elf_mn10300_local_got_tls_type): Define.
(elf_mn10300_howto_table): Add entries for R_MN10300_TLS_GD,
R_MN10300_TLS_LD, R_MN10300_TLS_LDO, R_MN10300_TLS_GOTIE,
R_MN10300_TLS_IE, R_MN10300_TLS_LE, R_MN10300_TLS_DPTMOD,
R_MN10300_TLS_DTPOFF, R_MN10300_TLS_TPOFF relocs.
(mn10300_reloc_map): Likewise.
(elf_mn10300_tls_transition): New function.
(dtpoff, tpoff, mn10300_do_tls_transition): New functions.
(mn10300_elf_check_relocs): Add TLS support.
(mn10300_elf_final_link_relocate): Likewise.
(mn10300_elf_relocate_section): Likewise.
(mn10300_elf_relax_section): Likewise.
(elf32_mn10300_link_hash_newfunc): Initialise new field.
(_bfd_mn10300_copy_indirect_symbol): New function.
(elf32_mn10300_link_hash_table_create): Initialise new fields.
(_bfd_mn10300_elf_size_dynamic_sections): Add TLS support.
(_bfd_mn10300_elf_finish_dynamic_symbol): Likewise.
(_bfd_mn10300_elf_reloc_type_class): Allocate an
elf_mn10300_obj_tdata structure.
(elf_backend_copy_indirect_symbol): Define.
* reloc.c (BFD_MN10300_TLS_GD, BFD_MN10300_TLS_LD,
BFD_MN10300_TLS_LDO, BFD_MN10300_TLS_GOTIE, BFD_MN10300_TLS_IE,
BFD_MN10300_TLS_LE, BFD_MN10300_TLS_DPTMOD,
BFD_MN10300_TLS_DTPOFF, BFD_MN10300_TLS_TPOFF): New relocations.
(BFD_RELOC_MN10300_32_PCREL, BFD_RELOC_MN10300_16_PCREL): Move to
alongside other MN10300 relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* config/tc-mn10300.c (other_registers): Add SSP and USP.
(md_assemble): Add support for TLS relocs.
(mn10300_parse_name): Likewise.
* readelf.c (is_16bit_abs_reloc): Add detection of R_MN10300_16.
2012-03-07 17:52:00 +00:00
H.J. Lu
Roland McGrath
Jan Beulich
Nick Clifton
Maciej W. Rozycki
Sean Keys
Sandra Loosemore
James Lemke
Mike Frysinger
Tristan Gingold
Segher Boessenkool
Alan Modra
Andreas Schwab
Nathan Sidwell
DJ Delorie
Arnold Metselaar
Mark Wielaard
David S. Miller
Richard Sandiford
Matthew Gretton-Dann
Maxim Kuvyrkov
Thomas Schwinge
Andreas Krebbel