There's no reason to not also issue them in Intel syntax mode, and it
can be quite helpful to mention the actual insn (after all there can be
multiple on a single line).
First and foremost REX must come last. Next JumpInterSegment branches
can't possibly have a REX prefix, as they're consistently CpuNo64. And
finally make BND prefix handling in output_branch() consistent with that
of other prefixes in the same function, and make its placement among
prefixes consistent with output_jump() (which, oddly enough, still isn't
the supposedly canonical order specified by the *_PREFIX definitions).
The expectation of x86-64-branch-3 for "call" / "jmp" with an obvious
direct destination to translate to an indirect _far_ branch is plain
wrong. The operand size prefix should have no effect at all on the
interpretation of the operand. The main underlying issue here is that
the Intel64 templates of the direct branches don't include Disp16, yet
various assumptions exist that it would always be there when there's
also Disp32/Disp32S, toggled by the operand size prefix (which is
being ignored by direct branches in Intel64 mode).
Along these lines it was also wrong to base the displacement width
decision solely on the operand size prefix: REX.W cancels this effect
and hence needs taking into consideration, too.
A disassembler change is needed here as well: XBEGIN was wrongly treated
the same as direct CALL/JMP, which isn't the case - the operand size
prefix does affect displacement size there, it's merely ignored when it
comes to updating [ER]IP.
In memory operand addressing, which forms of displacement are permitted
besides Disp8 is pretty clearly limited
- outside of 64-bit mode, Disp16 or Disp32 only, depending on address
size (MPX being special in not allowing Disp16),
- in 64-bit mode, Disp32s or Disp64 without address size override, and
solely Disp32 with one.
Adjust assembler and i386-gen to match this, observing that templates
already get adjusted before trying to match them against input depending
on the presence of an address size prefix.
This adjustment logic gets extended to all cases, as certain DispNN
values should also be dropped when there's no such prefix. In fact
behavior of the assembler, perhaps besides the exact diagnostics wording,
should not differ between there being templates applicable to 64-bit and
non-64-bit at the same time, or there being fully separate sets of
templates, with their DispNN settings already reduced accordingly.
This adjustment logic further gets guarded such that there wouldn't be
and Disp<N> conversion based on address size prefix when this prefix
doesn't control the width of the displacement (on branches other than
absolute ones).
These adjustments then also allow folding two MOV templates, which had
been split between 64-bit and non-64-bits variants so far.
Once in this area also
- drop the bogus DispNN from JumpByte templates, leaving just the
correct Disp8 there (compensated by i386_finalize_displacement()
now setting Disp8 on their operands),
- add the missing Disp32S to XBEGIN.
Note that the changes make it necessary to temporarily mark a test as
XFAIL; this will get taken care of by a subsequent patch. The failing
parts are entirely bogus and will get replaced.
This also renames it to make it clearer that this is not a cheap
function (to compute_and_set_names). Also renames name to m_name
to make the implementation of the renamed function more readable.
Most of the places that access sym->m_name directly were also changed
to call linkage_name () instead, to make it clearer which name they
are accessing.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_decode_symbol): Update.
* buildsym.c (add_symbol_to_list): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
(ctf_add_var_cb): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(dwarf2_compute_name): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
(minimal_symbol_reader::install): Update.
* psymtab.c (print_partial_symbols): Update.
(psymbol_hash): Update.
(psymbol_compare): Update.
(add_psymbol_to_bcache): Update.
(maintenance_check_psymtabs): Update.
* stabsread.c (define_symbol): Update.
* symtab.c (symbol_set_names): Rename to...
(general_symbol_info::compute_and_set_names): ...this.
(general_symbol_info::natural_name): Update.
(general_symbol_info::search_name): Update.
(fixup_section): Update.
* symtab.h (struct general_symbol_info) <name>: Rename to...
<m_name>: ...this.
<compute_and_set_names>: Rename from...
(symbol_set_names): ...this.
(SYMBOL_SET_NAMES): Remove.
(struct symbol) <ctor>: Update.
Change-Id: I8da1f10cab4e0b89f19d5750fa4e6e2ac8d2b24f
Now that we enabled it by default, this change adds a NEWS entry for it.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention that multithreaded symbol loading is now on by
default.
Change-Id: Ic344596a3b1b6e612a0071a50df49588b833c15d
I reckon it's quite OK to write &p->field in C when p might be NULL,
and lots of old C programmers probably agree with me. However, ubsan
disagrees and so do some people I respect. I suspect C++ influence is
to blame for the ubsan behaviour. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92634. So far no one has
educated me as to why I'm wrong to claim that there isn't anything in
the C standard to say that p->field is always (*p).field. Note 79
doesn't quite do that because it doesn't cover null pointers. If
there was such an equivalence then you could claim &p->field has a
null pointer reference when p is NULL, even though no C compiler would
ever dereference p.
Anyway, to silence ubsan I'm going to apply the following though I
prefer to avoid casts when possible. And I'm using (void *)
deliberately because this is C, not C++!
* ldlang.c (lang_output_section_find_by_flags): Don't use &p->field
when p might be NULL.
* ldelf.c (output_rel_find, ldelf_place_orphan): Likewise.
(insert_os_after, lang_insert_orphan, lookup_name): Likewise.
(strip_excluded_output_sections, lang_clear_os_map): Likewise.
(lang_check, lang_for_each_input_file): Likewise.
(lang_reset_memory_regions, find_replacements_insert_point): Likewise.
(find_rescan_insertion, lang_propagate_lma_regions): Likewise.
(lang_record_phdrs): Likewise.
* emultempl/alphaelf.em (alpha_after_open): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/ppc32elf.em (ppc_after_check_relocs): Likewise.
* emultempl/spuelf.em (spu_before_allocation): Likewise.
(embedded_spu_file): Likewise.
Triggered by overflow of size calulation resulting in a too small
buffer. The testcase found one of the som_bfd_count_ar_symbols
problems.
* som.c (setup_sections): Don't overflow space_strings_size. Use
bfd_malloc2 to catch overflow of size calculation.
(som_prep_for_fixups): Use bfd_zalloc2 to catch overflow of size
calculation.
(som_build_and_write_symbol_table): Similarly use bfd_zmalloc2.
(som_slurp_symbol_table): Similarly use bfd_zmalloc2, bfd_malloc2,
and bfd_zalloc2.
(bfd_som_attach_aux_hdr): Use size_t vars for string length.
(som_bfd_count_ar_symbols): Use bfd_malloc2 to catch overflow of
size calculation. Use size_t vars for length and catch overflow.
(som_slurp_armap): Use bfd_alloc2 to catch overflow of size
calculation.
(som_bfd_ar_write_symbol_stuff): Similarly use bfd_zmalloc2 and
bfd_malloc2. Perform size calculations in bfd_size_type.
"perf record" creates files perf.data/perf.data.old; these can be safely
ignored in .gitignore, to avoid showing up in git status.
ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* .gitignore: Add perf.data and perf.data.old.
Change-Id: I214ae9d6b7265c2cb1356f11c9b0b82e2b391352
readline/ChangeLog
2019-12-23 Eli Zaretskii <eliz@gnu.org>
* posixstat.h (S_IRGRP, S_IWGRP, S_IXGRP, S_IROTH, S_IWOTH)
(S_IXOTH, S_IRWXG, S_IRWXO): Define if undefined, even if S_IRWXU
is defined, because non-Posix systems may defined only the user
bits.
Two buffer overflows, and some over restrictive length checks.
* vms-alpha.c (add_symbol): Add "max" parameter. Error on string
length larger than max.
(_bfd_vms_slurp_egsd): Ensure record is at least large enough to
read string length byte, error if not. Pass size to add_symbol.
(_bfd_vms_slurp_etir): Don't read past end of buffer when reading
type and length. Allow read of last byte in buffer.
* d30v-dis.c (extract_value): Make num param a uint64_t, constify
oper. Use unsigned vars.
(print_insn): Make num var uint64_t. Constify oper and remove now
unnecessary casts on extract_value calls.
(print_insn_d30v): Use unsigned vars. Adjust printf formats.
This patch catches and reports errors when reading leb128 values,
addressing a FIXME in read_leb128.
* dwarf.h (read_leb128): Update prototype.
(report_leb_status): New inline function.
(SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Define.
* dwarf.c: Use above macros throughout file. Formatting.
(read_leb128): Reorder params. Add status return param.
Don't stop reading until finding terminator or end of data.
Detect loss of significant bits. Sign extend only on
terminating byte.
(read_sleb128, read_uleb128): Delete functions.
(SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Delete macros.
(read_and_print_leb128): Rewrite.
(process_extended_line_op): Return a size_t. Use size_t vars.
Adjust to suit new macros. Add proper name size to "data" when
processing DW_LNE_define_file.
(process_abbrev_section): Adjust to suit new macros.
(decode_location_expression, skip_attr_bytes): Likewise.
(get_type_signedness): Likewise.
(read_and_display_attr_value): Likewise. Consolidate block code.
(process_debug_info): Adjust to suit new macros.
(display_formatted_table, display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise. Properly check for end
of DW_LNS_extended_op.
(display_debug_macinfo): Adjust to suit new macros.
(get_line_filename_and_dirname, display_debug_macro): Likewise.
(display_view_pair_list): Likewise. Don't back off when hitting
end of data.
(display_loc_list): Adjust to suit new macros.
(display_loclists_list, display_loc_list_dwo): Likewise.
(display_debug_rnglists_list, read_cie): Likewise.
(display_debug_frames): Likewise.
* readelf.c: Use new ULEB macros throughout file.
(read_uleb128): Delete.
(decode_arm_unwind_bytecode): Use read_leb128.
(decode_tic6x_unwind_bytecode): Likewise.
(display_tag_value): Adjust to suit new macros.
(display_arc_attribute, display_arm_attribute): Likewise.
(display_gnu_attribute, display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute, display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute, display_tic6x_attribute): Likewise.
(display_msp430x_attribute, display_msp430_gnu_attribute): Likewise.
(display_riscv_attribute, process_attributes): Likewise.
The SVR4 solib event handler determines whether an event is related to a
non-base link namespace by comparing the event's debug struct address
to the debug struct address of the initial program image. However, this
can fail when using LD_AUDIT as audit libraries are loaded before the
loader has initialised the initial program image's debug struct. When
the event handler fails to find the debug struct, the probe-based
debugger interface is disabled and a warning is flagged to the user.
This commit adds a fallback test to help determine whether an event is
for a foreign link namespace when the debug struct isn't available.
gdb/ChangeLog:
2019-12-15 George Barrett <bob@bob131.so>
* solib-svr4.c (svr4_handle_solib_event): Add fallback link
namespace test for when the debug struct isn't available.
gdb/ChangeLog
2019-12-21 Eli Zaretskii <eliz@gnu.org>
* top.c (print_gdb_configuration): Print "--with-xxhash" or
"--without-xxhash" according to HAVE_LIBXXHASH.
* Use the type-safe registry for ctf_file_key;
* Drop "typedef" when defining "struct ctf_context";
* Use ANOFFSET with SECT_OFF_TEXT to get the text base address;
gdb/ChangeLog
2019-12-20 Weimin Pan <weimin.pan@oracle.com>
* ctfread.c (ctf_file_key): Change type to objfile_key.
(struct ctf_context): Remove typedef.
(get_objfile_text_range): Use ANOFFSET to get text base.
In my previous commit, I missed this other spot that is missing a
quote...
gdb/testsuite/ChangeLog:
* lib/sym-info-cmds.exp (GDBInfoSymbols::check_no_entry): Add
(another) quote in test name.
This is a refactoring. Instead of a plain unsigned value, use an enum
bitfield.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* dwarf2read.c (is_valid_DW_AT_calling_convention_for_subroutine):
New function.
(read_subroutine_type): Validate the parsed
DW_AT_calling_convention value before assigning it to a
subroutine's calling_convention attribute.
* gdbtypes.h (struct func_type) <calling_convention>: Use
an enum bitfield as its type, instead of plain unsigned.
Change-Id: Ibc6b2f71e885cbc5c3c9d49734f7125acbfd1bcd
Extend testcases for GDB's infcall of call-by-value functions that
take aggregate values as parameters. In particular, existing test has
been substantially extended with class definitions whose definitions
of copy constructor, destructor, and move constructor functions are a
combination of
(1) explicitly defined by the user,
(2) defaulted inside the class declaration,
(3) defaulted outside the class declaration,
(4) deleted
(5) not defined in the source.
For each combination, a small and a large class is generated as well
as a derived class and a container class. Additionally, the following
manually-written cases are provided:
- a dynamic class (i.e. class with a virtual method)
- classes that contain an array field
- a class whose copy ctor is inlined
- a class whose destructor is deleted
- classes with multiple copy and/or move ctors
Test cases check whether GDB makes the right decision to pass an
object by value or implicitly by reference, whether really a copy of
the argument is passed, and whether the copy constructor and
destructor of the clone of the argument are invoked properly.
The input program pass-by-ref.cc is generated in the test's output
directory. The input program pass-by-ref-2.cc is manually-written.
Tests have been verified on the X86_64 architecture with
GCC 7.4.0, 8.2.0, and 9.2.1.
gdb/testsuite/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/pass-by-ref.cc: Delete. Generated in the output
directory instead.
* gdb.cp/pass-by-ref.exp: Extend with more cases.
* gdb.cp/pass-by-ref-2.cc: New file.
* gdb.cp/pass-by-ref-2.exp: New file.
Change-Id: Ie8ab1f260c6ad5ee4eb34b2c1597ce24af04abb6
If an aggregate argument is implicitly pass-by-reference, allocate a
temporary object on the stack, initialize it via the copy constructor
(if exists) or trivially by memcpy'ing. Pass the reference of the
temporary to the callee function. After the callee returns, invoke
the destructor of the temporary.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
PR gdb/25054
* infcall.c (call_function_by_hand_dummy): Update the argument-
passing section for call-by-value parameters.
(struct destructor_info): New struct.
(call_destructors): New auxiliary function.
Change-Id: I18fa5d0df814dfa0defe9e862a88a6dbf1d99d01
Walk through a given type to collect information about whether the
type is copy constructible, destructible, trivially copyable,
trivially copy constructible, trivially destructible. The previous
algorithm returned only a boolean result about whether the type is
trivially copyable. This patch computes more info. Additionally, it
utilizes DWARF attributes that were previously not taken into account;
namely, DW_AT_deleted, DW_AT_defaulted, and DW_AT_calling_convention.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gnu-v3-abi.c (enum definition_style): New enum type.
(get_def_style): New function.
(is_user_provided_def): New function.
(is_implicit_def): New function.
(is_copy_or_move_constructor_type): New function.
(is_copy_constructor_type): New function.
(is_move_constructor_type): New function.
(gnuv3_pass_by_reference): Collect language_pass_by_ref_info
for a given type.
Change-Id: Ic05bd98a962d07ec3c1ad041f709687eabda3bb9
In C++, call-by-value arguments that cannot be trivially copied are
implicitly passed by reference. When making an infcall, GDB needs to
find out if an argument is pass-by-reference or not, so that the
correct semantics can be followed. This patch enriches the
information computed by the language ops for pass-by-reference
arguments. Instead of a plain binary result, the computed information
now includes whether the argument is
- copy constructible
- destructible
- trivially copyable
- trivially copy constructible
- trivially destructible
This information is stored in a struct named 'language_pass_by_ref_info'.
This patch paves the way for GDB's infcall mechanism to call the copy
ctor and the destructor of a pass-by-ref argument appropriately.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* language.h (struct language_pass_by_ref_info): New struct.
(struct language_defn)<la_pass_by_reference>: Change the signature
to return a language_pass_by_ref_info instead of an int.
(language_pass_by_reference): Ditto.
(default_pass_by_reference): Ditto.
Adjust the users listed below.
* arch-utils.c (default_return_in_first_hidden_param_p):
Update.
* cp-abi.c (cp_pass_by_reference): Update.
* cp-abi.h (cp_pass_by_reference): Update declaration.
(struct cp_abi_ops)<pass_by_reference>: Update.
* gnu-v3-abi.c (gnuv3_pass_by_reference): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* language.c (language_pass_by_reference): Update.
(default_pass_by_reference): Update.
* tic6x-tdep.c (tic6x_return_value): Update.
Change-Id: Ib1c1f87f2490a5737c469f7b7185ddc7f6a164cb
Extend GDB's internal representation of types to include the
DW_AT_calling_convention, DW_AT_defaulted, and DW_AT_deleted attributes
that were introduced in DWARF5.
These attributes will be helpful in a future patch about infcall'ing
functions with call-by-value parameters. GDB will use the attributes
to decide whether the type of a call-by-value parameter is implicitly
pass-by-reference.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* dwarf2read.c (dwarf2_add_member_fn): Read the DW_AT_defaulted
and DW_AT_deleted attributes of a function.
(read_structure_type): Read the DW_AT_calling_convention attribute
of a type.
(is_valid_DW_AT_defaulted): New function.
(is_valid_DW_AT_calling_convention_for_type): New function.
* gdbtypes.h: Include dwarf2.h.
(struct fn_field)<defaulted>: New field to store the
DW_AT_defaulted attribute.
(struct fn_field)<is_deleted>: New field to store the
DW_AT_deleted attribute.
(struct cplus_struct_type)<calling_convention>: New field to store
the DW_AT_calling_convention attribute.
(TYPE_FN_FIELD_DEFAULTED): New macro.
(TYPE_FN_FIELD_DELETED): New macro.
(TYPE_CPLUS_CALLING_CONVENTION): New macro.
* gdbtypes.c (dump_fn_fieldlists): Update for the changes made
to the .h file.
(print_cplus_stuff): Likewise.
Change-Id: I54192f363115b78ec7435a8563b73fcace420765
This removes the call to tui_show_source from tui_ui_out. This always
seemed like a hack, and now that the TUI is using the proper
observers, it seems not to be needed.
The rest of the logic remains, unfortunately, because it is needed to
suppress some gdb output in the TUI case. We could probably find a
nicer way to do this (maybe a ui_out_flag), but I haven't attempted
this.
This was the last caller of tui_show_source, so this is removed as
well.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_source): Remove.
* tui/tui.h (tui_show_source): Don't declare.
* tui/tui-out.c (tui_ui_out::do_field_string): Don't call
tui_show_source.
Change-Id: Id71098e597ee4ebfef0429562baa45f537bd2c2b
PR tui/18932 notes that "list" no longer works in the TUI. At some
point in the past, it switched the TUI source window to show the
specified source; but now this source briefly flashes before the TUI
reverts to showing the current stack frame's source.
This patch fixes this bug by introducing a new observer that notices
when the user selected context has changed. Then, the existing
before-prompt observer is updated to request the correct update:
either one based on the current stack frame, or one based on the
user's source symtab_and_line.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
PR tui/18932:
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Rename parameters. Handle the not-from-stack-frame case.
(from_stack, from_source_symtab): New globals.
(tui_before_prompt, tui_normal_stop): Update.
(tui_context_changed, tui_symtab_changed): New functions.
(tui_attach_detach_observers): Attach new observers.
gdb/testsuite/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* gdb.tui/list-before.exp: New file.
Change-Id: I62013825f6c1afdd568a1c7a8c019b0c881131af
This patch adds an observable, so that a later patch can change the
TUI to notice when the user has selected a new source symtab, say via
"list".
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* source.c (struct current_source_location) <set, symtab, line>:
New methods.
<m_symtab, m_line>: Rename. Now private.
(get_current_source_symtab_and_line)
(set_default_source_symtab_and_line)
(set_current_source_symtab_and_line)
(clear_current_source_symtab_and_line, select_source_symtab)
(info_source_command, print_source_lines_base)
(info_line_command, search_command_helper): Update.
* observable.h (current_source_symtab_and_line_changed): Declare
observable.
* observable.c (current_source_symtab_and_line_changed): Define
observable.
Change-Id: I3c0f6b40f2df84b590bdf5b5ec5ccd8423bb7f22
This changes tui_before_prompt to take a bool rather than an int.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-hooks.c (tui_before_prompt): Change parameter to bool.
(tui_before_prompt, tui_normal_stop): Update.
Change-Id: I9c7f2b764748fe19621851dc4fed4775a6db211a
update_source_window_as_is calls set_current_source_symtab_and_line,
but I don't think there is any reason it should be doing this. This
patch removes the call.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c
(tui_source_window_base::update_source_window_as_is): Don't call
set_current_source_symtab_and_line.
Change-Id: I1152fc7c78150974bd3d555b8568a6f88b65dbe6
This changes set_locator_info to take a symtab_and_line, rather than
the individual components.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <set_locator_info>:
Take a symtab_and_line.
* tui/tui-stack.c (tui_locator_window::set_locator_info): Take a
symtab_and_line.
(tui_show_frame_info): Update.
Change-Id: Icb58d67e6c5bdc034eede9e5bbe8c1d1e633fbb5
tui_show_frame_info calls update_exec_info after calling
erase_source_content, but there's no need to do this, as
erase_source_content already clears the exec info.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-stack.c (tui_show_frame_info): Don't call
update_exec_info.
Change-Id: I63d658561028ac1bc0a0a2b7ac17da1b9c6134fe
Jan Beulich
Christian Biesinger
GDB Administrator
Alan Modra
Hannes Domani
Ruslan Kabatsayev
Eli Zaretskii
Hans-Peter Nilsson
George Barrett
Weimin Pan
Simon Marchi
Tankut Baris Aktemur
Tom Tromey