(Ref: https://sourceware.org/ml/gdb/2017-06/msg00020.html)
Assuming int_t is a typedef to int:
typedef int int_t;
gdb currently loses this expression's typedef:
(gdb) p (int_t) 0
$1 = 0
(gdb) whatis $1
type = int
or:
(gdb) whatis (int_t) 0
type = int
or, to get "whatis" out of the way:
(gdb) maint print type (int_t) 0
...
name 'int'
code 0x8 (TYPE_CODE_INT)
...
This prevents a type printer for "int_t" kicking in, with e.g.:
(gdb) p (int_t) 0
From the manual, we can see that that "whatis (int_t) 0" command
invocation should have printed "type = int_t":
If @var{arg} is a variable or an expression, @code{whatis} prints its
literal type as it is used in the source code. If the type was
defined using a @code{typedef}, @code{whatis} will @emph{not} print
the data type underlying the @code{typedef}.
(...)
If @var{arg} is a type name that was defined using @code{typedef},
@code{whatis} @dfn{unrolls} only one level of that @code{typedef}.
That one-level stripping is currently done here, in
gdb/eval.c:evaluate_subexp_standard, handling OP_TYPE:
...
else if (noside == EVAL_AVOID_SIDE_EFFECTS)
{
struct type *type = exp->elts[pc + 1].type;
/* If this is a typedef, then find its immediate target. We
use check_typedef to resolve stubs, but we ignore its
result because we do not want to dig past all
typedefs. */
check_typedef (type);
if (TYPE_CODE (type) == TYPE_CODE_TYPEDEF)
type = TYPE_TARGET_TYPE (type);
return allocate_value (type);
}
However, this stripping is reachable in both:
#1 - (gdb) whatis (int_t)0 # ARG is an expression with a cast to
# typedef type.
#2 - (gdb) whatis int_t # ARG is a type name.
while only case #2 should strip the typedef. Removing that code from
evaluate_subexp_standard is part of the fix. Instead, we make the
"whatis" command implementation itself strip one level of typedefs
when the command argument is a type name.
We then run into another problem, also fixed by this commit:
value_cast always drops any typedefs of the destination type.
With all that fixed, "whatis (int_t) 0" now works as expected:
(gdb) whatis int_t
type = int
(gdb) whatis (int_t)0
type = int_t
value_cast has many different exit/convertion paths, for handling many
different kinds of casts/conversions, and most of them had to be
tweaked to construct the value of the right "to" type. The new tests
try to exercise most of it, by trying castin of many different
combinations of types. With:
$ make check TESTS="*/whatis-ptype*.exp */gnu_vector.exp */dfp-test.exp"
... due to combinatorial explosion, the testsuite results for the
tests above alone grow like:
- # of expected passes 246
+ # of expected passes 3811
You'll note that the tests exposed one GCC buglet, filed here:
Missing DW_AT_type in DW_TAG_typedef of "typedef of typedef of void"
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81267
gdb/ChangeLog:
2017-08-21 Pedro Alves <palves@redhat.com>
* eval.c (evaluate_subexp_standard) <OP_TYPE>: Don't dig past
typedefs.
* typeprint.c (whatis_exp): If handling "whatis", and expression
is OP_TYPE, strip one typedef level. Otherwise don't strip
typedefs here.
* valops.c (value_cast): Save "to" type before resolving
stubs/typedefs. Use that type as resulting value's type.
gdb/testsuite/ChangeLog:
2017-08-21 Pedro Alves <palves@redhat.com>
* gdb.base/dfp-test.c
(d32_t, d64_t, d128_t, d32_t2, d64_t2, d128_t2, v_d32_t, v_d64_t)
(v_d128_t, v_d32_t2, v_d64_t2, v_d128_t2): New.
* gdb.base/dfp-test.exp: Add whatis/ptype/cast tests.
* gdb.base/gnu_vector.exp: Add whatis/ptype/cast tests.
* gdb.base/whatis-ptype-typedefs.c: New.
* gdb.base/whatis-ptype-typedefs.exp: New.
* gdb.python/py-prettyprint.c (int_type, int_type2): New typedefs.
(an_int, an_int_type, an_int_type2): New globals.
* gdb.python/py-prettyprint.exp (run_lang_tests): Add tests
involving typedefs and cast expressions.
* gdb.python/py-prettyprint.py (class pp_int_typedef): New.
(lookup_typedefs_function): New.
(typedefs_pretty_printers_dict): New.
(top level): Register lookup_typedefs_function in
gdb.pretty_printers.
This removes save_inferior_ptid, a cleanup function, in favor of
scoped_restore.
This also fixes a possible (it seems unlikely that it could happen in
practice) memory leak -- save_inferior_ptid should have used
make_cleanup_dtor, because it allocated memory.
I tested this on the buildbot. However, there are two caveats to
this. First, sometimes it seems I misread the results. Second, I
think this patch touches some platforms that can't be tested by the
buildbot. So, extra care seems warranted.
ChangeLog
2017-08-18 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* spu-multiarch.c (parse_spufs_run): Use scoped_restore.
* sol-thread.c (sol_thread_resume, sol_thread_wait)
(sol_thread_xfer_partial, rw_common): Use scoped_restore.
* procfs.c (procfs_do_thread_registers): Use scoped_restore.
* proc-service.c (ps_xfer_memory): Use scoped_restore.
* linux-tdep.c (linux_corefile_thread): Remove a cleanup.
(linux_get_siginfo_data): Add "thread" argument. Use
scoped_restore.
* linux-nat.c (linux_child_follow_fork)
(check_stopped_by_watchpoint): Use scoped_restore.
* infrun.c (displaced_step_prepare_throw, write_memory_ptid)
(THREAD_STOPPED_BY, handle_signal_stop): Use scoped_restore.
(restore_inferior_ptid, save_inferior_ptid): Remove.
* btrace.c (btrace_fetch): Use scoped_restore.
* bsd-uthread.c (bsd_uthread_fetch_registers)
(bsd_uthread_store_registers): Use scoped_restore.
* breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
scoped_restore.
* aix-thread.c (aix_thread_resume, aix_thread_wait)
(aix_thread_xfer_partial): Use scoped_restore.
* inferior.h (save_inferior_ptid): Remove.
opcodes/arm-dis.c:print_insn may update disassemble_info.mach to
bfd_mach_arm_unknown unless USER_SPECIFIED_MACHINE_TYPE is marked.
When default_print_insn is called for the first time,
disassemble_info.mach is correctly set in GDB, but arm-dis.c:print_insn
sets it to bfd_mach_arm_unknown. Then, when default_print_insn is
called again (in a loop), it triggers the assert.
The patch fixes the assert by marking USER_SPECIFIED_MACHINE_TYPE so that
opcodes won't reset disassemble_info.mach.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
PR tdep/21818
* arm-tdep.c (gdb_print_insn_arm): Mark
USER_SPECIFIED_MACHINE_TYPE if exec_bfd isn't NULL.
This patch uses GDB self test in GDBserver. The self tests are run if
GDBserver is started with option --selftest.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention GDBserver's new option "--selftest".
* Makefile.in (SFILES): Remove selftest.c, add common/selftest.c.
* selftest.c: Move it to common/selftest.c.
* selftest.h: Move it to common/selftest.h.
* selftest-arch.c (reset): New function.
(tests_with_arch): Call reset.
gdb/gdbserver:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* Makefile.in (OBS): Add selftest.o.
* configure.ac: AC_DEFINE GDB_SELF_TEST if $development.
* configure, config.in: Re-generated.
* server.c: Include common/sefltest.h.
(captured_main): Handle option --selftest.
gdb/testsuite:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.server/unittest.exp: New.
gdb/doc:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Server): Document "--selftest".
The next patch moves selftest.c to common/selftest.c, so that GDBserver
can use it as well. However selftest.c uses something isn't "portable" on
GDB and GDBserver.
First, this patch removes QUIT. I don't expect that we type ctrl-c during
self/unit tests, and each test shouldn't take long time. Secondly, I
replace exception_fprintf and printf_filtered with debug_printf. Verified
that unit tests still catch fails.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* selftest.c (run_tests): Don't call QUIT. Call debug_printf
instead of exception_fprintf and printf_filtered.
The heap-allocated 'old_source_verbose' local was accidentally left
behind by commit 2ec845e758 ("More uses of scoped_restore").
Valgrind caught it, like:
==20123== 8 bytes in 1 blocks are definitely lost in loss record 4,609 of 13,785
==20123== at 0x4C2A988: calloc (vg_replace_malloc.c:711)
==20123== by 0x60A2F8: xcalloc (common-utils.c:84)
==20123== by 0x4CDBE5: build_command_line(command_control_type, char const*) (cli-script.c:159)
==20123== by 0x4CDC32: get_command_line(command_control_type, char const*) (cli-script.c:172)
==20123== by 0x5230F1: python_command(char*, int) (python.c:421)
==20123== by 0x4C61AD: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:106)
==20123== by 0x4C911F: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1902)
==20123== by 0x7CA79E: execute_command(char*, int) (top.c:650)
==20123== by 0x695A0C: command_handler(char*) (event-top.c:590)
==20123== by 0x7CA33F: read_command_file(_IO_FILE*) (top.c:461)
==20123== by 0x4D0C3A: script_from_file(_IO_FILE*, char const*) (cli-script.c:1584)
==20123== by 0x4C2727: source_script_from_stream(_IO_FILE*, char const*, char const*) (cli-cmds.c:589)
gdb/ChangeLog:
2017-08-17 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (source_command): Delete 'old_source_verbose'
local.
This plugs a couple leaks introduced by commit fff8551cf5
("dwarf2read.c: Some C++fycation, use std::vector, std::unique_ptr").
The first problem is that nothing owns the temporary line_header that
handle_DW_AT_stmt_list creates in some cases. Before the commit
mentioned above, the temporary line_header case used to have:
make_cleanup (free_cu_line_header, cu);
and that cleanup was assumed to be run by process_die, after
handle_DW_AT_stmt_list returns and before child DIEs were processed.
The second problem is found in setup_type_unit_groups: that also used
to have a similar make_cleanup call, and ended up with a similar leak
after the commit mentioned above.
Fix both cases by recording in dwarf2_cu whether a line header is
owned by the cu/die, and have process_die explicitly free the
line_header if so, making use of a new RAII object that also replaces
the reset_die_in_process cleanup, while at it.
Thanks to Philippe Waroquiers for noticing the leak and pointing in
the right direction.
gdb/ChangeLog:
2017-08-17 Pedro Alves <palves@redhat.com>
* dwarf2read.c (struct dwarf2_cu) <line_header_die_owner>: New
field.
(reset_die_in_process): Delete, replaced by ...
(process_die_scope): ... this new class. Make it responsible for
freeing cu->line_header too.
(process_die): Use process_die_scope.
(handle_DW_AT_stmt_list): Record the line header's owner CU/DIE in
cu->line_header_die_owner. Don't release the line header if it's
owned by the CU.
(setup_type_unit_groups): Make the CU/DIE own the line header.
Don't release the line header here.
* testsuite/binutils-all/note-3-64.s: New test. Checks assembly
and decoding of version2 GNU build attribute notes.
* testsuite/binutils-all/note-3-32.s: New test. 32-bit version of
the above test.
* testsuite/binutils-all/note-3-64.d: New test driver.
* testsuite/binutils-all/note-3-32.d: New test driver.
* testsuite/binutils-all/objcopy.exp: Run the new test.
* readelf.c (is_64bit_abs_reloc): Add R_SPARC_64.
Skip IFUNC relocations in debug sections ignored by ld.so.
Fixes the following ld test failures on aarch64:
FAIL: Build libpr18808.so
FAIL: Build libpr18808.so_2
FAIL: Run pr18808
aborting at bfd/elfnn-aarch64.c:4986 in elf64_aarch64_final_link_relocate.
bfd/
PR ld/18808
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Skip IFUNC
relocations in debug sections, change abort to _bfd_error_handler.
Detected this leak with valgrind memcheck:
==30840== 194 bytes in 1 blocks are definitely lost in loss record 9,138 of 10,922
==30840== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==30840== by 0x80DF82: bfd_malloc (libbfd.c:193)
==30840== by 0x80E12D: bfd_zmalloc (libbfd.c:278)
==30840== by 0x819E80: elf_x86_64_get_synthetic_symtab (elf64-x86-64.c:6835)
==30840== by 0x4F7B01: elf_read_minimal_symbols(objfile*, int, elfinfo const*) (elfread.c:1124)
==30840== by 0x4F7CE7: elf_symfile_read(objfile*, enum_flags<symfile_add_flag>) (elfread.c:1182)
==30840== by 0x7557FC: read_symbols(objfile*, enum_flags<symfile_add_flag>) (symfile.c:861)
==30840== by 0x755EE1: syms_from_objfile_1(objfile*, section_addr_info*, enum_flags<symfile_add_flag>) (symfile.c:1062)
We perform a dynamic allocation in
elf64-x86-64.c:elf_x86_64_get_synthetic_symtab
s = *ret = (asymbol *) bfd_zmalloc (size);
that appear to never get freed.
gdb:
2017-08-17 Alex Lindsay <alexlindsay239@gmail.com>
* elfread.c (elf_read_minimal_symbols): xfree synthsyms.
Currently, "layout asm" is not so useful as "layout src" with Single-Key mode:
you have to use multi-key commands like "ni" and "si" to do single-stepping.
This patch adds, in addition to "next" and "step" commands, corresponding
assembly-level ones - "nexti" and "stepi" - to Single-Key mode, with the
shortcuts of "o" (from "step Over") and "i" (from "Step Into") respectively.
gdb/ChangeLog:
* tui/tui.c (tui_commands): Add "nexti" and "stepi" to the Single-Key
mode command list.
gdb/doc/ChangeLog:
* gdb.texinfo (TUI Single Key Mode): Document the new shortcuts in
Single-Key mode.
Add new note types available since Linux 4.8 to elf/common.h and
make the 'readelf' tool aware of it.
include/
* elf/common.h (NT_PPC_TAR): New macro.
(NT_PPC_PPR): Likewise.
(NT_PPC_DSCR): Likewise.
(NT_PPC_EBB): Likewise.
(NT_PPC_PMU): Likewise.
(NT_PPC_TM_CGPR): Likewise.
(NT_PPC_TM_CFPR): Likewise.
(NT_PPC_TM_CVMX): Likewise.
(NT_PPC_TM_CVSX): Likewise.
(NT_PPC_TM_SPR): Likewise.
(NT_PPC_TM_CTAR): Likewise.
(NT_PPC_TM_CPPR): Likewise.
(NT_PPC_TM_CDSCR): Likewise.
binutils/
* readelf.c (get_note_type): Handle PPC note types available
since Linux 4.8.
I noticed this while looking at the reggroup intializations. It seems
for xtensa the "cpN" reggroup->name is getting assigned to the same text
pointer for each iteration of XTENSA_MAX_COPROCESSOR.
Note, internally reggroup_new() does not do any xstrdup().
gdb/ChangeLog:
2017-08-15 Stafford Horne <shorne@gmail.com>
* xtensa-tdep.c (xtensa_init_reggroups): Use xstrdup for cpname.
When I made commit 9a6c7d9c02, which
C++-fied gdb/common/environ.[ch], I mistakenly altered the behaviour
of the 'unset environment' command. This command, which should delete
all environment variables, is now resetting the list of variables to
the state they were when GDB was started.
This commit fixes this regression, and also adds a test on
gdb.base/environ.exp which really checks if 'unset environment'
worked.
gdb/ChangeLog:
2017-08-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21954
* infcmd.c (unset_environment_command): Use the 'clear' method on
the environment instead of resetting it.
gdb/testsuite/ChangeLog:
2017-08-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21954
* gdb.base/environ.exp: Add test to check if 'unset environment'
works.
We got a report from the linux-arm-kernel folks about getting spurious
warnings when building the kernel with binutils 2.29. See
https://www.spinics.net/lists/arm-kernel/msg599929.html
which boils down to this testcase.
$> cat /tmp/tst.s
lr .req x30
/tmp/tst.s: Assembler messages:
/tmp/tst.s:1: Warning: ignoring attempt to redefine built-in register 'lr'
Instead let's treat this as a proper alias at startup time thus
avoiding the problem and treating these as proper aliases
rather than new registers. This means that attempts to redefine
the alias with the same "name" will provoke no warning and attempts
to redefine the alias to something else will provoke the above mentioned
warning.
Tested make check-gas and no regressions.
Ok to apply to trunk (and backport to 2.29 branch)?
Regards
Ramana
Newer GCC versions yield colored diagnostic messages by default, which may
be useful when executing GDB interactively from a terminal. But when run
from a GDB test case, the compiler output is written into gdb.log, where
such escape sequences are usually more inhibiting than helpful to the
evaluation of test results. So this patch suppresses that.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (universal_compile_options): New caching proc.
(gdb_compile): Suppress GCC's coloring of messages.
While working on the previous patch, I noticed that BITS_IN_BYTES can be
replaced by HOST_CHAR_BIT, which is used more widely in gdb.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
* valprint.c (print_octal_chars): Use HOST_CHAR_BIT.
(print_binary_chars): Likewise.
(BITS_IN_BYTES): Remove.
PR gdb/21675 points out a few regressions in scalar printing.
One type of regression is due to not carrying over the old handling of
floating point printing -- where a format like "/d" causes a floating
point number to first be cast to a signed integer. This patch restores
this behavior.
The other regression is a longstanding bug in print_octal_chars: one of
the constants was wrong. This patch fixes the constant and adds static
asserts to help catch this sort of error.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
PR gdb/21675
* valprint.c (LOW_ZERO): Change value to 034.
(print_octal_chars): Add static_asserts for octal constants.
* printcmd.c (print_scalar_formatted): Add 'd' case.
testsuite/ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
PR gdb/21675:
* gdb.base/printcmds.exp (test_radices): New function.
* gdb.dwarf2/var-access.exp: Use p/u, not p/d.
* gdb.base/sizeof.exp (check_valueof): Use p/d.
* lib/gdb.exp (get_integer_valueof): Use p/d.
I happened to notice that add_symbol_file_command leaks "sect_opts".
This patch fixes the leak by changing sect_opts to be a std::vector.
I had to change the logic in the loop a little bit. Previously, it
was incrementing section_index after completing an entry; but this
changes it to push a new entry when the name is seen.
I believe the argument parsing here is mildly incorrect, in that
nothing checks whether the -s option actually had any arguments.
Maybe gdb can crash if "-s NAME" is given without an argument. I
didn't try to fix this in this patch, but I do have another patch I
can send later that fixes it up.
Regression tested on the buildbot.
ChangeLog
2017-08-11 Tom Tromey <tom@tromey.com>
* symfile.c (add_symbol_file_command): Use std::vector.
This patch adds std::move to few spots where it seems to be missing.
Regression tested by the buildbot.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
* break-catch-throw.c (handle_gnu_v3_exceptions): Use std::move.
* break-catch-syscall.c (create_syscall_event_catchpoint): Use
std::move.
* break-catch-sig.c (create_signal_catchpoint): Use std::move.
Until all .eh_frame sections have been edited we don't know their
sizes. So it isn't possible to properly decide whether a non-empty
.eh_frame section follows a given section until editing is complete.
bfd/
PR 21441
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Don't add
alignment padding here.
* elflink.c (bfd_elf_discard_info): Add .eh_frame padding here
in a reverse pass over sections.
ld/
PR 21441
* testsuite/ld-x86-64/pr21038a.d: Adjust.
* testsuite/ld-x86-64/pr21038a-now.d: Adjust.
OUTPUT_FORMAT in linker script of PR ld/21884 tests is needed to trigger
PR ld/21884. Restore linker scripts and add nacl versions of the same
tests.
* testsuite/ld-i386/i386.exp: Run pr21884-nacl.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr21884.d: Don't run on nacl targets.
* testsuite/ld-x86-64/pr21884.d: Likewise.
* testsuite/ld-i386/pr21884.t: Revert the last change.
* testsuite/ld-x86-64/pr21884.t: Likewise.
* testsuite/ld-i386/pr21884-nacl.d: New file.
* testsuite/ld-i386/pr21884-nacl.t: Likewise.
* testsuite/ld-x86-64/pr21884-nacl.d: Likewise.
* testsuite/ld-x86-64/pr21884-nacl.t: Likewise.
OUTPUT_FORMAT in the script results in "./ld-new: target elf32-i386
not found" and similarly for the x86_64 test.
* testsuite/ld-i386/pr21884.t: Remove unneeded format, arch and entry.
* testsuite/ld-x86-64/pr21884.t: Likewise.
The documentation was erroneously saying that there is a command named
"show set startup-with-shell", while the correct version is "show
startup-with-shell". This commit fixes obvious mistake.
gdb/doc/ChangeLog:
2017-08-12 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21925
* gdb.texinfo (Starting) <startup-with-shell>: Fix typo ("show
set...").
The get_valueof procedure allows tests to conveniently make gdb evaluate
an expression an return the value as a string. However, it includes an
end-of-line character in its result. I stumbled on this when trying to
use that result as part of a regex further in a test.
You can see this for example by adding a puts in
gdb.dwarf2/implref-struct.exp:get_members:
set members [get_valueof "" ${var} ""]
puts "<$members>"
The output is
<{a = 0, b = 1, c = 2}
>
This is because the regex in get_valueof is too greedy, the captured
portion matches anything up to the gdb_prompt, including the end of line
characters. This patch changes it to capture everything but end of line
characters.
The output of the puts becomes:
<{a = 0, b = 1, c = 2}>
I tested this by running gdb.dwarf2/implref-array.exp and
gdb.dwarf2/implref-struct.exp, the two only current users of that
procedure.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (get_valueof): Don't capture end-of-line
characters.
When synthesizing symbols for PLT entries, allocate space for symbol
names with @plt suffixes together with symbol table so that all memory
is returned when symbol table is freed.
PR binutils/21943
* elf32-i386.c (elf_i386_get_synthetic_symtab): Allocate space
for @plt suffixes first.
* elf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Likewise.
* emultempl/elf32.em (handle_option): Accept the -z globalaudit
command line option.
* lexsup.c (elf_static_list_options): Add -z globalaudit.
* ld.texinfo: Document the support for the new command line
option.
* NEWS: Mention the new feature.
* testsuite/ld-elf/audit.exp: Add a test of the -z globalaudit
command line option.
* testsuite/ld-elf/globalaudit.rd: New file: Expected output from
readelf.
We can't create alias of common symbol. Local alias of common symbol has
been disallowed. But global alias of common symbol is disallowed when the
common symbol is seen first and silently dropped otherwise. This patch
disallows alias of common symbol in all cases.
gas/
PR gas/21667
* read.c (pseudo_set): Update error message for alias of common
symbol.
* write.c (write_object_file): Disallow both local and global
aliases of common symbol.
* testsuite/gas/elf/common5a.d: New file.
* testsuite/gas/elf/common5a.l: Likewise.
* testsuite/gas/elf/common5a.s: Likewise.
* testsuite/gas/elf/common5b.d: Likewise.
* testsuite/gas/elf/common5b.l: Likewise.
* testsuite/gas/elf/common5b.s: Likewise.
* testsuite/gas/elf/common5c.d: Likewise.
* testsuite/gas/elf/common5c.s: Likewise.
* testsuite/gas/elf/common5d.d: Likewise.
* testsuite/gas/elf/common5d.s: Likewise.
* testsuite/gas/elf/elf.exp: Run common5a, common5b, common5c
and common5d.
- Make skiplist_entry a class with private data members.
- Move all construction logic to the ctor.
- Make skip_file_p etc be methods of skiplist_entry.
- Use std::list for the skip entries chain. Make the list own its
elements.
- Get rid of the ALL_SKIPLIST_ENTRIES/ALL_SKIPLIST_ENTRIES_SAFE
macros, use range-for / iterators instead.
- function_name_is_marked_for_skip 'function_sal' argument must be
non-NULL, so make it a reference instead.
All skiplist_entry invariants are now controlled by skiplist_entry
methods/internals. Some gdb_asserts disappear for being redundant.
gdb/ChangeLog:
2017-08-11 Pedro Alves <palves@redhat.com>
* infrun.c (process_event_stop_test): Adjust
function_name_is_marked_for_skip call.
* skip.c: Include <list>.
(skiplist_entry): Make it a class with private fields, and
getters/setters.
(skiplist_entry_chain): Delete.
(skiplist_entries): New.
(skiplist_entry_count): Delete.
(highest_skiplist_entry_num): New.
(ALL_SKIPLIST_ENTRIES, ALL_SKIPLIST_ENTRIES_SAFE): Delete.
(add_skiplist_entry): Delete.
(skiplist_entry::skiplist_entry): New.
(skiplist_entry::add_entry): New.
(skip_file_command, skip_function): Adjust.
(compile_skip_regexp): Delete.
(skip_command): Don't compile regexp here. Adjust to use
skiplist_entry::add_entry.
(skip_info): Adjust to use range-for and getters.
(skip_enable_command, skip_disable_command): Adjust to use
range-for and setters.
(skip_delete_command): Adjust to use std::list.
(add_skiplist_entry): Delete.
(skip_file_p): Delete, refactored as ...
(skiplist_entry::do_skip_file_p): ... this new method.
(skip_gfile_p): Delete, refactored as ...
(skiplist_entry::do_gskip_file_p): ... this new method.
(skip_function_p, skip_rfunction_p): Delete, refactored as ...
(skiplist_entry::skip_function_p): ... this new method.
(function_name_is_marked_for_skip): Now returns bool, and takes
the function sal by const reference. Adjust to use range-for and
skiplist_entry methods.
(_initialize_step_skip): Remove references to
skiplist_entry_chain, skiplist_entry_count.
* skip.h (function_name_is_marked_for_skip): Now returns bool, and
takes the function sal by const reference.
It is required that unwinder->sniffer should set *this_cache to NULL if
the unwinder is not applicable or exception is thrown, so
78ac5f8316 adds clear_pointer_cleanup to set
*this_cache to NULL in case of exception in order to fix PR 14100.
https://sourceware.org/ml/gdb-patches/2012-08/msg00075.html
This patch removes that clear_pointer_cleanup, and catch all exception in
the caller of unwinder->sniffer. In case of exception, reset *this_case.
gdb:
2017-08-11 Yao Qi <yao.qi@linaro.org>
* dwarf2-frame.c (clear_pointer_cleanup): Remove.
(dwarf2_frame_cache): Remove reset_cache_cleanup.
(dwarf2_frame_cache):
* frame-unwind.c (frame_unwind_try_unwinder): Catch
RETURN_MASK_ALL and set *this_case to NULL.
* frame-unwind.h: Update comments.
