bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use bfd_reloc_dangerous
when pcrel_lo reloc has an addend. Use reloc_dangerous callback for
bfd_reloc_dangerous. Use einfo instead of warning callback for errors.
Add %X%P to error messages.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend test.
* testsuite/ld-riscv-elf/pcrel-lo-addend.d: New.
* testsuite/ld-riscv-elf/pcrel-lo-addend.s: New.
Correct a commit 9d06997adb ("RISC-V: Relax RISCV_PCREL_* to
RISCV_GPREL_*") regression and remove a `-Wmissing-field-initializers'
compilation error:
cc1: warnings being treated as errors
.../bfd/elfnn-riscv.c: In function '_bfd_riscv_relax_pc':
.../bfd/elfnn-riscv.c:3117: error: missing initializer
.../bfd/elfnn-riscv.c:3117: error: (near initialization for 'hi_reloc.hi_addend')
make[4]: *** [elf64-riscv.lo] Error 1
which for versions of GCC before 4.7 prevents support for RISC-V targets
from being built. See also GCC PR c/36750.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc): Use `memset' to
initialize `hi_reloc'.
bfd/
PR ld/22756
* elfnn-riscv.c (riscv_relax_delete_bytes): New parameter link_info.
If link_info->wrap_hash, check for a duplicate symbol and ignore.
(_bfd_riscv_relax_call, bfd_riscv_relax_lui, _bfd_riscv_relax_tls_le):
Pass new argument to riscv_relax_delete_bytes.
(_bfd_riscv_relax_align, _bfd_riscv_relax_delete): Likewise. Remove
ATTRIBUTE_UNUSED from link_info parameter.
Many targets define their own dyn_relocs struct when they could use
struct elf_dyn_relocs. This patch tidies that, and uses
readonly_dynrelocs in a few more places.
The SH adjust_dynamic_symbol had some really weird code dating back to
2002 that looked over dynamic relocations for any in SEC_HAS_CONTENTS
or SEC_READONLY sections, rather than just the usual SEC_READONLY
sections. So basically any dynamic relocation. What's more, the SH
relocate_section has no support for emitting dynamic relocations in
non-PIC. In other words, SH has no support for avoiding copy relocs
in non-PIC. I've made that more obvious by using "if (0 && ..)" in
asjust_dynamic_symbol.
Unfortunately, LM32, M32R, NDS32, and OR1K copied the bogus SH
adjust_dynamic_symbol code. So none of those targets would have
avoided copy relocs. LM32, M32R, NDS32 get the "if (0)" treatment
too. (LM32 is even more broken in that non_got_ref is never set.)
OR1K relocate_section looks like it might support dynamic relocs in
non-PIC, so I've enabled the copy reloc avoidance code for that
target.
* elf32-hppa.c (struct elf32_hppa_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf32_hppa_adjust_dynamic_symbol): Comment tidy.
* elf32-lm32.c (struct elf_lm32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(lm32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-m32r.c (struct elf_m32r_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(m32r_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-metag.c (struct elf_metag_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf_metag_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-microblaze.c (struct elf32_mb_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(readonly_dynrelocs): New function.
(microblaze_elf_adjust_dynamic_symbol): Use it.
* elf32-nds32.c (struct elf_nds32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(nds32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-nios2.c (struct elf32_nios2_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
* elf32-or1k.c (struct elf_or1k_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(or1k_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-sh.c (struct elf_sh_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(sh_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-tilepro.c (struct tilepro_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilepro_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfnn-riscv.c (struct riscv_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(riscv_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-sparc.c (struct _bfd_sparc_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(_bfd_sparc_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-tilegx.c (struct tilegx_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilegx_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
This makes the elf_link_hash_entry weakdef field, currently used to
point from a weak symbol to a strong alias, a circular list so that
all aliases can be found from any of them. A new flag, is_weakalias,
distinguishes the weak symbol from a strong alias, and is used in all
places where we currently test u.weakdef != NULL.
With the original u.weakdef handling it was possible to have two or
more weak symbols pointing via u.weakdef to a strong definition.
Obviously that situation can't map to a circular list; One or more of
the weak symbols must point at another weak alias rather than the
strong definition. To handle that, I've added an accessor function to
return the strong definition.
* elf-bfd.h (struct elf_link_hash_entry): Add is_weakalias.
Rename u.weakdef to u.alias and update comment.
(weakdef): New static inline function.
* elflink.c (bfd_elf_record_link_assignment) Test is_weakalias
rather than u.weakdef != NULL, and use weakdef function.
(_bfd_elf_adjust_dynamic_symbol): Likewise.
(_bfd_elf_fix_symbol_flags): Likewise. Clear is_weakalias on
all aliases if def has been overridden in a regular object, not
u.weakdef.
(elf_link_add_object_symbols): Delete new_weakdef flag. Test
is_weakalias and use weakdef. Set is_weakalias and circular
u.alias. Update comments.
(_bfd_elf_gc_mark_rsec): Test is_weakalias rather than
u.weakdef != NULL and use weakdef function.
* elf-m10300.c (_bfd_mn10300_elf_adjust_dynamic_symbol): Test
is_weakalias rather than u.weakdef != NULL and use weakdef
function. Assert that def is strong defined.
* elf32-arc.c (elf_arc_adjust_dynamic_symbol): Likewise.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Likewise.
* elf32-bfin.c (elf32_bfinfdpic_adjust_dynamic_symbol): Likewise.
(bfin_adjust_dynamic_symbol): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_adjust_dynamic_symbol): Likewise.
* elf32-cris.c (elf_cris_adjust_dynamic_symbol): Likewise.
* elf32-frv.c (elf32_frvfdpic_adjust_dynamic_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol): Likewise.
* elf32-i370.c (i370_elf_adjust_dynamic_symbol): Likewise.
* elf32-lm32.c (lm32_elf_adjust_dynamic_symbol): Likewise.
* elf32-m32r.c (m32r_elf_adjust_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol): Likewise.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Likewise.
* elf32-nds32.c (nds32_elf_adjust_dynamic_symbol): Likewise.
* elf32-nios2.c (nios2_elf32_adjust_dynamic_symbol): Likewise.
* elf32-or1k.c (or1k_elf_adjust_dynamic_symbol): Likewise.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Likewise.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf32-score.c (s3_bfd_score_elf_adjust_dynamic_symbol): Likewise.
* elf32-score7.c (s7_bfd_score_elf_adjust_dynamic_symbol): Likewise.
* elf32-sh.c (sh_elf_adjust_dynamic_symbol): Likewise.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol): Likewise.
* elf32-tilepro.c (tilepro_elf_gc_mark_hook): Likewise.
(tilepro_elf_adjust_dynamic_symbol): Likewise.
* elf32-vax.c (elf_vax_adjust_dynamic_symbol): Likewise.
* elf32-xtensa.c (elf_xtensa_adjust_dynamic_symbol): Likewise.
* elf64-alpha.c (elf64_alpha_adjust_dynamic_symbol): Likewise.
* elf64-hppa.c (elf64_hppa_adjust_dynamic_symbol): Likewise.
* elf64-ia64-vms.c (elf64_ia64_adjust_dynamic_symbol): Likewise.
* elf64-ppc.c (ppc64_elf_gc_mark_hook): Likewise.
(ppc64_elf_adjust_dynamic_symbol): Likewise.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf64-sh64.c (sh64_elf64_adjust_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol): Likewise.
* elfnn-ia64.c (elfNN_ia64_adjust_dynamic_symbol): Likewise.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Likewise.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_gc_mark_hook): Likewise.
(_bfd_sparc_elf_adjust_dynamic_symbol): Likewise.
* elfxx-tilegx.c (tilegx_elf_gc_mark_hook): Likewise.
(tilegx_elf_adjust_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Likewise.
This matches the ISA specification. This also adds two tests: one to
make sure the assembler rejects invalid 'c.lui's, and one to make sure
we only relax valid 'c.lui's.
bfd/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Don't relax to c.lui
when rd is x0.
include/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* opcode/riscv.h (VALID_RVC_LUI_IMM): c.lui can't load the
immediate 0.
gas/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* testsuite/gas/riscv/c-lui-fail.d: New testcase.
gas/testsuite/gas/riscv/c-lui-fail.l: Likewise.
gas/testsuite/gas/riscv/c-lui-fail.s: Likewise.
gas/testsuite/gas/riscv/riscv.exp: Likewise.
ld/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* ld/testsuite/ld-riscv-elf/c-lui.d: New testcase.
ld/testsuite/ld-riscv-elf/c-lui.s: Likewise.
ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: New test suite.
In the medany code model the compiler generates PCREL_HI20+PCREL_LO12
relocation pairs against local symbols because HI20+LO12 relocations
can't reach high addresses. We relax HI20+LO12 pairs to GPREL
relocations when possible, which is an important optimization for
Dhrystone. Without this commit we are unable to relax
PCREL_HI20+PCREL_LO12 pairs to GPREL when possible, causing a 10%
permormance hit on Dhrystone on Rocket.
Note that we'll now relax
la gp, __global_pointer$
to
mv gp, gp
which probably isn't what you want in your entry code. Users who want
gp-relative symbols to continue to resolve should add ".option norelax"
accordingly. Due to this, the assembler now pairs PCREL relocations
with RELAX relocations when they're expected to be relaxed just like
every other relaxable relocation.
bfd/ChangeLog
2017-10-19 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (riscv_pcgp_hi_reloc): New structure.
(riscv_pcgp_lo_reloc): Likewise.
(riscv_pcgp_relocs): Likewise.
(riscv_init_pcgp_relocs): New function.
(riscv_free_pcgp_relocs): Likewise.
(riscv_record_pcgp_hi_reloc): Likewise.
(riscv_record_pcgp_lo_reloc): Likewise.
(riscv_delete_pcgp_hi_reloc): Likewise.
(riscv_use_pcgp_hi_reloc): Likewise.
(riscv_record_pcgp_lo_reloc): Likewise.
(riscv_find_pcgp_lo_reloc): Likewise.
(riscv_delete_pcgp_lo_reloc): Likewise.
(_bfd_riscv_relax_pc): Likewise.
(_bfd_riscv_relax_section): Handle R_RISCV_PCREL_* relocations
via the new functions above.
gas/ChangeLog
2017-10-19 Palmer Dabbelt <palmer@dabbelt.com>
* config/tc-riscv.c (md_apply_fix): Mark
BFD_RELOC_RISCV_PCREL_HI20 as relaxable when relaxations are
enabled.
We currently delete bytes by shifting an entire BFD backwards to
overwrite the bytes we no longer need. The result is that relaxing a
BFD is quadratic time.
This patch adds an additional relocation that specifies a byte range
that will be deleted from the final object file, and adds a relaxation
pass (between the existing passes that delete bytes and the alignment
pass) that actually deletes the bytes. Note that deletion is still
quadratic time, and nothing uses R_RISCV_DELETE yet.
I've been meaning to go convert all the other relaxations to use
R_RISCV_DELETE and then make it faster, but this patch has been sitting
around for months so it looks like that won't happen for a bit. The
PCREL->GPREL relaxation that comes next uses this, and since we've been
using these two patches out of tree since I wrote them months ago I
figure it's better to just get them in now. I (or someone else :)) can
convert all the relocations later...
R_RISCV_DELETE will never be emitted into ELF objects, so therefor isn't
exposed to the rest of binutils. As such, we're not considering this as
part of the ABI.
bfd/ChangeLog
2017-10-19 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv (R_RISCV_DELETE): New define.
(_bfd_riscv_relax_delete): New function.
(perform_relocation): Handle R_RISCV_DELETE.
(_bfd_riscv_relax_section): Likewise.
ld/ChangeLog
2017-10-19 Palmer Dabbelt <palmer@dabbelt.com>
* emultempl/riscvelf.em (riscv_elf_before_allocation): Add a
third relaxation pass.
Cache the max alignment of output sections instead of scanning all
output sections for each input section, which can take a very long
time if there are millions of input/output sections.
PR ld/22274
* elfnn-riscv.c (riscv_elf_link_hash_table): Add max_alignment.
(riscv_elf_link_hash_table_create): Initialize max_alignment to
(bfd_vma) -1.
(_bfd_riscv_relax_section): Cache the max alignment of output
sections if possible.
This used to just print "can't relax section: Success", which is a silly
error message.
bfd/ChangeLog
2017-09-07 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (_bfd_riscv_relax_align): Call bfd_set_error and
print an error message when unable to relax a .align directive.
I recently modified our Linux port's base address such the absolute
address 0 is no longer addressable as a 32-bit PC-relative offset.
Since Linux links a weak undefined symbol in an intermediate binary, it
needs to be able to reference absolute address 0.
This patch changes R_RISCV_PCREL_* relocations to absolute relocations
while resolving them in order to allow these symbols to be referenced in
PC-relative programs linked at high addresses. Note that this doesn't
apply to PIC, which also uses PC-relative relocations, just to
position-dependent objects, which we use to allow programs to be linked
at high addresses.
In case some of our embedded users are using R_RISCV_PCREL_* as a hacked
up method of getting position-independent binaries (which can work if
you have very simple programs), we only convert the relocations when the
PC-relative version would overflow.
bfd/ChangeLog:
2017-09-07 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (riscv_zero_pcrel_hi_reloc): New function.
(riscv_record_pcrel_hi_reloc): Add absolute argument.
(riscv_elf_relocate_section): Call riscv_zero_pcrel_hi_reloc for
R_RISCV_PCREL_HI20 relocs, and pass the result to
riscv_record_pcrel_hi_reloc.
The dynrelro introduction wasn't implemented quite right for RISC-V,
as it didn't consider TLS copy relocs.
bfd/ChangeLog
2017-06-29 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Fix TLS copy
relocs.
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
I'd made this dynamic section read-only so a flag test distinguished
it from .dynbss, but like any other .data.rel.ro section it really
should be marked read-write. (It is read-only after relocation, not
before.) When using the standard linker scripts this usually doesn't
matter since the output section is among other read-write sections and
not page aligned. However, it might matter in the extraordinary case
of the dynamic section being the only .data.rel.ro section with the
output section just happening to be page aligned and a multiple of a
page in size. In that case the output section would be read-only, and
live it its own read-only PT_LOAD segment, which is incorrect.
* elflink.c (_bfd_elf_create_dynamic_sections): Don't make
dynamic .data.rel.ro read-only.
* elf32-arm.c (elf32_arm_finish_dynamic_symbol): Compare section
rather than section flags when deciding where copy reloc goes.
* elf32-cris.c (elf_cris_finish_dynamic_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_finish_dynamic_symbol): Likewise.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Likewise.
* elf32-metag.c (elf_metag_finish_dynamic_symbol): Likewise.
* elf32-microblaze.c (microblaze_elf_finish_dynamic_symbol): Likewise.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol): Likewise.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol): Likewise.
* elf32-ppc.c (ppc_elf_finish_dynamic_symbol): Likewise.
* elf32-s390.c (elf_s390_finish_dynamic_symbol): Likewise.
* elf32-tic6x.c (elf32_tic6x_finish_dynamic_symbol): Likewise.
* elf32-tilepro.c (tilepro_elf_finish_dynamic_symbol): Likewise.
* elf64-ppc.c (ppc64_elf_finish_dynamic_symbol): Likewise.
* elf64-s390.c (elf_s390_finish_dynamic_symbol): Likewise.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol): Likewise.
* elfnn-riscv.c (riscv_elf_finish_dynamic_symbol): Likewise.
* elfxx-mips.c (_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): Likewise.
* elfxx-tilegx.c (tilegx_elf_finish_dynamic_symbol): Likewise.
bfd/ChangeLog:
2017-02-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (GP_NAME): New macro.
(riscv_global_pointer_value): Use it.
(_bfd_riscv_relax_lui): If symbol and global pointer are in same
output section, consider only that section's alignment.
"_gp" could conflict with ABI-complient code. While it's probably OK
because MIPS uses this name, we figured it'd be good to clean this up
before a release with RISC-V in it.
ld/ChangeLog:
2017-02-13 Palmer Dabbelt <palmer@dabbelt.com>
* emulparams/elf32lriscv-defs.sh (SDATA_START_SYMBOLS): Change
_gp to __global_pointer$.
bfd/ChangeLog:
2017-02-13 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (riscv_global_pointer_value): Change _gp to
__global_pointer$.
bfd/ChangeLog
2017-02-07 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (riscv_elf_finish_dynamic_sections): Only write PLT
entry size if PLT header is written.
Variables defined in shared libraries are copied into an executable's
.bss section when code in the executable is non-PIC and thus would
require dynamic text relocations to access the variable directly in
the shared library. Recent x86 toolchains also copy variables into
the executable to gain a small speed improvement.
The problem is that if the variable was originally read-only, the copy
in .bss is writable, potentially opening a security hole. This patch
cures that problem by putting the copy in a section that becomes
read-only after ld.so relocation, provided -z relro is in force.
The patch also fixes a microblaze linker segfault on attempting to
use dynamic bss variables.
bfd/
PR ld/20995
* elf-bfd.h (struct elf_link_hash_table): Add sdynrelro and
sreldynrelro.
(struct elf_backend_data): Add want_dynrelro.
* elfxx-target.h (elf_backend_want_dynrelro): Define.
(elfNN_bed): Update initializer.
* elflink.c (_bfd_elf_create_dynamic_sections): Create
sdynrelro and sreldynrelro sections.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Place variables
copied into the executable from read-only sections into sdynrelro.
(elf32_arm_size_dynamic_sections): Handle sdynrelro.
(elf32_arm_finish_dynamic_symbol): Select sreldynrelro for
dynamic relocs in sdynrelro.
(elf_backend_want_dynrelro): Define.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol)
(elf32_hppa_size_dynamic_sections, elf32_hppa_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol)
(elf_i386_size_dynamic_sections, elf_i386_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol)
(elf_metag_size_dynamic_sections, elf_metag_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol)
(microblaze_elf_size_dynamic_sections)
(microblaze_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol)
(nios2_elf32_adjust_dynamic_symbol)
(nios2_elf32_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol)
(or1k_elf_adjust_dynamic_symbol, or1k_elf_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol)
(ppc_elf_size_dynamic_sections, ppc_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol)
(elf32_tic6x_size_dynamic_sections)
(elf32_tic6x_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tilepro.c (tilepro_elf_adjust_dynamic_symbol)
(tilepro_elf_size_dynamic_sections)
(tilepro_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol)
(ppc64_elf_size_dynamic_sections, ppc64_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol)
(elf_x86_64_size_dynamic_sections)
(elf_x86_64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol)
(elfNN_aarch64_size_dynamic_sections)
(elfNN_aarch64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol)
(riscv_elf_size_dynamic_sections, riscv_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol)
(_bfd_mips_elf_size_dynamic_sections)
(_bfd_mips_vxworks_finish_dynamic_symbol): As above.
* elfxx-sparc.c (_bfd_sparc_elf_adjust_dynamic_symbol)
(_bfd_sparc_elf_size_dynamic_sections)
(_bfd_sparc_elf_finish_dynamic_symbol): As above.
* elfxx-tilegx.c (tilegx_elf_adjust_dynamic_symbol)
(tilegx_elf_size_dynamic_sections)
(tilegx_elf_finish_dynamic_symbol): As above.
* elf32-mips.c (elf_backend_want_dynrelro): Define.
* elf64-mips.c (elf_backend_want_dynrelro): Define.
* elf32-sparc.c (elf_backend_want_dynrelro): Define.
* elf64-sparc.c (elf_backend_want_dynrelro): Define.
* elf32-tilegx.c (elf_backend_want_dynrelro): Define.
* elf64-tilegx.c (elf_backend_want_dynrelro): Define.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Tidy.
(microblaze_elf_size_dynamic_sections): Handle sdynbss.
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Make use
of linker shortcuts to dynamic sections rather than comparing
names. Correctly set "got" flag.
ld/
PR ld/20995
* testsuite/ld-arm/farcall-mixed-app-v5.d: Update to suit changed
stub hash table traversal caused by section id increment. Accept
the previous output too.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib.d: Likewise.
* testsuite/ld-elf/pr20995a.s, * testsuite/ld-elf/pr20995b.s,
* testsuite/ld-elf/pr20995.r: New test.
* testsuite/ld-elf/elf.exp: Run it.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Before this commit we didn't cleanly support CFI directives because the
internal offsets used to get relaxed which broke them. This patch
significantly reworks how we handle linker relaxations:
* DWARF is now properly supported
* There is a ".option norelax" to disable relaxations, for when users
write assembly that can't be relaxed (if it's to be later patched up,
for example).
* There is an additional _RELAX relocation that specifies when previous
relocations can be relaxed.
We're in the process of documenting the RISC-V ELF ABI, which will
include documentation of our relocations
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
but we expect that this relocation set will remain ABI compatible in the
future (ie, it's safe to release).
Thanks to Kuan-Lin Chen for figuring out how to correctly relax the
debug info!
include/
* elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32.
bfd/
* reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation.
(BFD_RELOC_RISCV_TPREL_S): Likewise.
(BFD_RELOC_RISCV_RELAX): Likewise.
(BFD_RELOC_RISCV_CFA): Likewise.
(BFD_RELOC_RISCV_SUB6): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET16): Likewise.
(BFD_RELOC_RISCV_SET32): Likewise.
* elfnn-riscv.c (perform_relocation): Handle the new
relocations.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Likewise.
(howto_table): Likewise.
(riscv_reloc_map): Likewise.
(relax_func_t): New type.
(_bfd_riscv_relax_call): Add reserve_size argument, which
controls the maximal offset pessimism. Correct type of max_alignment.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Compute the required reserve size
when relocating and use it to when calling relax_func.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
gas/
* config/tc-riscv.c (riscv_set_options): Add relax.
(riscv_opts): Likewise.
(s_riscv_option): Add relax and norelax.
(riscv_apply_const_reloc): New function.
(append_insn): Move constant relocation handling to
riscv_apply_const_reloc.
(md_pcrel_from): Likewise.
(parse_relocation): Skip BFD_RELOC_UNUSED.
(md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6,
BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA.
(md_apply_fix): Likewise.
(riscv_pre_output_hook): New function.
* config/tc-riscv.h (md_pre_output_hook): Define.
(riscv_pre_output_hook): Declare.
(DWARF_CIE_DATA_ALIGNMENT): Always -4.
This is a mixed bag of format changes:
* Replacing constants with macros (0xffffffff with MINUS_ONE, for
example). There's one technically functional change in here (some
MINUS_ONEs are changed to 0), but it only changes the behavior of an
otherwise-unused field.
* Using 0 instead of 0x0 in the relocation table.
* There were some missing spaces before parens, the spaces have been
added.
* A handful of comments are now more descriptive.
* A bunch of whitespace-only changes, mostly alignment and brace
newlines.
bfd/
* elfnn-riscv.c: Formatting and comment fixes throughout.
* elfxx-riscv.c: Likewise.
(howto_table): Change the src_mask field from MINUS_ONE to 0 for
R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPMOD64, R_RISCV_TLS_DTPREL32,
R_RISCV_TLS_DTPREL64, R_RISCV_TLS_TPREL32, R_RISCV_TLS_TPREL64.
opcodes/
* riscv-opc.c: Formatting fixes.
gas/
* config/tc-riscv.c: Formatting and comment fixes throughout.