* wrapper.h: Remove definitions of internal functions.
* wrapper.c: Remove definitions of exported functions (which are
already in wrapper.h) and make static all internal wrap_* functions.
Don't include "bfd-elf.h".
(address_significant_size): Delete variable.
(dwarf2_build_psymtabs_hard): Don't set it, or check for
consistency between it and the Dwarf 2 compilation unit header
address size.
(read_address): Don't mask off bits above
address_significant_size.
* Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
(elf_bfd_h): Remove variable; it's no longer used.
* ChangeLog: Correct date on last entry.
* arm-linux-tdep.c (arm_linux_push_arguments): New function.
* config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
* config/arm/tm-embed: Fix build warning from redefinition of
LOWEST_PC.
* config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
* config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
override default in tm-arm.h. Use default target byte order
from tm-arm.h.
of PROC_SERVICE_IS_OLD.
(ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
rw_common): Change argument type from psaddr_t to gdb_ps_addr_t.
(NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
* acconfig.h (_MSE_INT_H): Define on Solaris 7.
* configure: Regenerate.
* config.in: Regenerate.
Change to rely on PIDGET etc.
* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
define. Allow target to use procfs hardware watchpoints.
* config/sparc/nm-sun4sol2.h: ditto.
* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
definitions to use 16 bits for the pid, 15 bits for the tid, and
1 bit for the flag.
* config/sparc/tm-sun4sol2.h: ditto.
(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
for more than 15 thread increments.
* arm-linux-tdep.c: Resolve implicit function declarations by
including target.h and value.h. Inclusion of symtab.h is
no longer needed.
* ChangeLog: Fix formatting of previous entry.
dependencies. Created ARM Linux specific arm-linux-tdep.c file and moved
missing code into it from arm-linux-nat.c.
2000-04-05 Scott Bambrough <scottb@netwinder.org>
* arm-linux-tdep.c: New file.
* arm-linux-nat.c (fetch_fpregs): Remove unused code.
(arm_get_longjmp_target): Moved it and all defines
it uses to arm-linux-tdep.c.
(arm_linux_extract_return_value): Moved to
arm-linux-tdep.c.
* config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
below the code to sort out additions and removals. That way, we
always catch all loaded shared libraries whose symbols we haven't
grabbed yet.
* solib.c (solib_add): Don't try to free a shared object's objfile
if it doesn't have one. Duh.
* solib.c (solib_add): If a pattern was given, but it doesn't
match any currently loaded shared libraries, print a message;
don't just be silent.
* config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
definition (and use the common one in tm-i386.h).
(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
(I386_DJGPP_TARGET): Don't define, it's no longer required.
(LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
i386-tdep.c defines it for all x86 targets.
(LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
* config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
* config/djgpp/djcheck.sh: Edit the copyright year out of the test
results. Fix editing of `main' arguments for non-GNU Sed.
error() during parse_and_eval_type().
(check_stub_method): Call safe_parse_type instead of
parse_and_eval_type().
* wrapper.c (gdb_parse_and_eval_type): New wrapper function.
(wrap_parse_and_eval_type): New support function.
* wrapper.h (gdb_parse_and_eval_type): Prototype.
(wrap_parse_and_eval_type): Prototype.
values that can be represented exactly.
* gdb.base/call-ar-st.exp (print print_small_structs): Fixed to match
above change, and to not check against the directory part of the source
file name.
(step into print_long_arg_list): Likewise.
(print print_small_structs from print_long_arg_list): Likewise.
(print print_long_arg_list): Likewise.
* wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
Safe version of value_subscript.
* varobj.c (): Use gdb_value_subscript() to get an array element value.
* ui-file.c: Include "gdb_string.h"
* cli-out.c: Include gdb_string.h to avoid compiler warnings.
* wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into
unions, since they are all used to hold both pointers and ints
at various times. Casting pointer to int and vice versa gives
warnings (and is not safe) if they are not the same size.
* defs.h (struct continuation_arg): make 'data' a union, to avoid
casting problems when int and pointer are not the same size.
* event-top.c (command_handler): use data as a union.
(command_line_handler_continuation): ditto.
* infcmd.c (step_1_continuation): use data as a union. Re-indent.
(step_once): ditto. (finish_command_continuation): ditto.
(finish_command): ditto.
* breakpoint.c (until_break_command): use data as a union.
(until_break_command_continuation): ditto.
* utils.c (add_intermediate_continuation): fix typo in comment.
breakpoint.c, breakpoint.h (remove_hw_watchpoints): New function.
infrun.c (resume): Remove hardware watchpoints before stepping
when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
* breakpoint.c (insert_breakpoints, do_enable_breakpoint):
Reselect the saved frame silently after frame selection for
watchpoint evaluation.
(insert_breakpoints): Add missing space in `Hardware watchpoint
deleted' message. Do not reinsert hardware watchpoint if it is
already marked for deletion at next stop.
expectation of additional changes before release), update
ISBN, add copy of top-level menu for @ifhtml, remove explicit
node links, rephrase and/or shorten lines to fix formatting
problem in both regular and @smallbook formats.
* annotate.texi: Shorten lines in example, use smallexample
consistently everywhere.
* Makefile.in: Add comment about texinfo 4.0 html generation.
(SFILES_INCLUDED): Add annotate.texi.
and P_LINK_W.
(P_PEA_FP, P_MOVL_SP_FP): New macros.
(P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
P_MOVM_L.
(altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
constants.
(delta68_in_sigtramp): New function.
(delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
(m68k_skip_prologue): Use P_* macros, not hex constants.
(m68k_find_saved_regs): Do not expect a fixed sequence of register save
instructions, but accept them in any order; use P_* macros, not octal
or hex constants; recognize also `fmovemx to (fp + displacement)' and
`moveml to (fp + displacement)'.
* m68/tm-delta68.h (IN_SIGTRAMP): New macro.
(FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
* annotate.texi (Annotations): When GDBN omit @chapter and @node entry.
* gdb.texinfo: Check for @ifinfo instead of @ifnottex.
(rluser.texinfo, inc-hist.texinfo, annotate.texi): Add local @chapter
and @node entries.
* gdb.texinfo: Link all top-level nodes.
* inc-hist.texinfo: When GDBN omit the chapter/node.
* rluser.texinfo (Command Line Editing): Ditto.
From David Whedon <dwhedon@gordian.com>
* top.c (execute_command): Checks all commands beore executing
to see if the user needs to be warned that the command is
deprecated, warns user if appropriate.
(add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
return values from void to struct cmd_list_element *.
* command.c (lookup_cmd_1): Check aliases before following link
in case user needs to be warned about a deprecated alias.
(deprecate_cmd): new exported function for command deprecation,
sets flags and posibly a replacement string.
(deprecated_cmd_warning): New exported funciton to warn user about
a deprecated command.
(lookup_cmd_composition): New exported function that determines
alias, prefix_command, and cmd based on a string. This is useful
is we want to full name of a command.
* command.h : Added prototypes for deprecate_cmd,
deprecated_warn_user and lookup_cmd_composition, added flags to
the cmd_list_element structure, changed return values for
add_com_* and add_info_* from void to cmd_list_element.
* maint.c : (maintenance_deprecate): New function to deprecate a
command. This exists only so that the testsuite can deprecate
commands at runtime and check the warning behavior.
(maintenance_undeprecate) : New function, drops deprecated flags.
(maintenance_do_deprecate): Actually does the (un)deprecation.
(initialize_maint_cmds): Added the above new deprecate commands.
* sol-thread.c (ps_pglobal_lookup): Change argument type from
paddr_t to psaddr_t. This mistake appears to date from an
erroneous man page in Solaris 2.5 -- the correct type from the
system headers has always been psaddr_t.
(ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): ditto.
(rw_common): ditto.
From Philippe De Muyter <phdm@macqel.be>
* event-loop.c (sys/types.h): File now included unconditionally.
(use_poll): New variable..
(gdb_notifier): poll- and select-versions merged.
(add_file_handler): If HAVE_POLL, check whether poll is usable,
and reset `use_poll' if not.
(create_file_handler): Select poll- or select-version according to
`use_poll'.
(delete_file_handler, handle_file_event): Likewise.
(gdb_wait_for_event, poll_timers): Likewise.
* config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
* config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
Remove
* i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
(i386_extract_return_value): Rewritten. Correctly support all
floating-point types and large integer types on targets that use
the standard i386 GDB register layout and return floating-point
values in the FPU.
* breakpoint.c (insert_breakpoints, remove_breakpoint)
(bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
remove, or check status of hardware watchpoints for entire structs
and arrays unless the user explicitly asked to watch that struct
or array.
(insert_breakpoints): Try to insert watchpoints for all the values
on the value chain, even if some of them fail to insert.
* values.c (value_primitive_field): Set the offset in struct value
we return when the field is a packed bitfield.
* remote.c (remote_threads_extra_info): new function.
Implement the extra thread info query for "info threads".
(remote_threads_info): clean up a bit.
(use_threadinfo_query, use_threadextra_query): new variables.
Control whether GDB will use the new or old protocol for
thread info queries.
(remote_open_1): initialize new variables.
(remote_async_open_1): ditto.
(remote_cisco_open): ditto.
(LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
out that these are target-dependent, and useful in non-native
configurations. Moved to...
* i386-linux-tdep.c: ... Here, a new file.
* Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
(i386-linux-tdep.o): New rule.
(i386-linux-nat.o): We no longer depend on frame.h.
* config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
* event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
Print an error at compile time if we are to use select, but FD_SET
is not available.
(SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
if HAVE_POLL is not defined and NO_FD_SET *is* defined.
(create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
(delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
(gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
instead of using memcpy and memset. Use FD_ISSET.
* config/i386/xm-go32.h (fd_mask): Remove typedef.
it:
* config/djgpp/djconfig.sh: New file.
* config/djgpp/config.sed: New file.
* config/djgpp/README: New file.
* config/djgpp/fnchange.lst: New file.
* config/djgpp/djcheck.sh: New file.
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. These all implement
Linux-specific signal trampoline detection, and should be moved to...
* i386-linux-nat.c: ... here.
* config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
this any more, since we're not enabling OS-specific code in a
OS-independent file.
(File Options): Add @cindex entries for each command-line option.
Document --epoch, --annotate, --async, --interpreter, --write,
--statistics, and --version.
* annotate.texi: Convert to a chapter. Use @value{GDBN} instead
of GDB.
* solib.c (current_sos): New function, replacing find_solib.
(find_solib): Deleted.
(free_so): New function.
(clear_solib): Call free_so, instead of writing it out.
(solib_add): Rewritten: compare the inferior's current list of
shared objects with GDB's list, and do the required loads and
unloads.
(info_sharedlibrary_command, solib_address): Don't use find_solib
to walk the list of shared libraries: call solib_add, and then
walk the list at so_list_head normally.
* objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
detach the core target. These tasks are taken care of elsewhere.
* target.c (remove_target_sections): New function.
* target.h (remove_target_sections): New declaration.
* solib.c (symbol_add_stub): Check whether we've already created
an objfile for this shared object first, before doing all that
work to compute section addresses, etc.
* objfiles.c (unlink_objfile): Report an internal error if objfile
doesn't occur in the object_files list.
* solib.c (special_symbol_handling): Delete argument; it's not
used.
* solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
from solib structures. Use it throughout solib.c, get rid of all
CORE_ADDR casts.
(struct so_list): Change type of lmaddr to CORE_ADDR.
(first_link_map_member): Change return value type to CORE_ADDR,
update callers.
(solib_add_common_symbols): Change parameter type to CORE_ADDR,
update callers.
(open_symbol_file_object, find_solib): Change type of lm variable
to CORE_ADDR.
(dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
to ISO C. Use ATTRIBUTE_UNUSED to avoid compiler warnings.
(dos_info): Avoid compiler warning when printing a ptrdiff_t.
* eval.c (evaluate_subexp_with_coercion): Add call to
check_typedef, to handle typedeffed vars correctly.
* gdb.base/printcmds.c: Add typedeffed arrays.
* gdb.base/printcmds.exp (test_print_typedef_arrays): New
procedure to test arrays that are typedef'd.
Add support for a variable object that tries to evaluate itself in
the currently selected frame, rather than in a fixed frame.
* wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
gdb_parse_exp_1.
* varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n
of varobj_create.
* varobj.c (varobj_list): Return type indicates whether the
variable's type has changed (for current frame variables).
(varobj_update): Handle the case where the variable's type has
changed.
(delete_variable_1): Allow for deletion of variables that have not
been installed yet.
(new_root_variable): Initialize use_selected_frame variable.
(value_of_root): This is where most of the work to handle "current
frame" variables was added. Most of the complexity involves
handling the case where the type of the variable has changed.
(varobj_create): Add a "type" argument, to tell if the
variable is one of these "current frame" variables. Also protect
call to parse_exp_1 from long jumping.
* mi-var-block.exp: The error report from varobj_create changed
since I am now trapping parse_exp_1 errors. Change the tests to
match the new error message.
* mi-var-child.exp: Ditto.
* mi-var-cmd.exp: Ditto.
* lib/gdb.exp: Fix the gdbtk_start routine to correctly find all
the library directories.
* gdbtk-varobj.c (variable_create): Pass the correct
"how_specified" flag to the varobj_create routine.
(print_387_status, i386_go32_float_info): Remove redundant
functions.
(regno_mapping, sig_map, excepn_map): Add braces around inner
initializers.
(many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
fix code which mixed signed with unsigned.
(go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
(go32_wait): Initialize INT3_addr.
(go32_fetch_registers): Extend all FP registers that are shorter
than 4 bytes to 32 bits. Support 32 standard FP registers defined
on config/i386/tm-i386.h.
(store_register): Support 32 FP registers.
(go32_create_inferior): Don't crash if handed a NULL pointer
instead of exec file name.
(ignore): Remove unused function.
(go32_insert_hw_breakpoint): Remove unused variables.
(init_go32_ops): Set value of processing_gcc_compilation to 2.
* gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
a binary operator.
(gnu_attach): Change error message for missing
argument to be identical to the corresponding message in
`inftarg.c'. This makes the testsuite happy.
* i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
%eflags isn't modified. This fixes a bug where every call to a
function in the program beyond the first call would fail.
* gdb.base/long_long.exp: Correct test suite failure when printing
a long long value as a double on ARM platforms.
ARM doubles use a hybrid endian format. It is not strictly little or big
endian. It is little endian with the words swapped.
* minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
(compact_minimal_symbols): Added `objfile' argument.
Put symbols in the objfile's hash table.
(install_minimal_symbols): Put symbols in the objfile's demangled
hash table.
(lookup_minimal_symbol): Use hash table to find symbol in
objfile.
(msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
functions.
(prim_record_minimal_symbol_and_info): Initialize the
hash link fields of the new minimal symbol.
* symtab.h (struct minimal_symbol): New fields `hash_next',
`demangled_hash_next'.
(msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
* objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
(struct objfile): New fields `msymbol_hash',
`msymbol_demangled_hash'.
* mi-cmds.h: Export mi_cmd_data_write_register_values.
* mi-cmds.c (mi_cmds): Implement data-write-register-values with
mi_cmd_data_write_register_values.
* mi-main.c (mi_cmd_data_write_register_values): New
function. Write a value into a register.
* mi-disassemble.exp: Don't assume numbers for the offset
values. They can be different depending on the architecture.
* mi-watch.exp (test_watchpoint_triggering): In same cases the
type can be 'hw wathcpoint' not just 'watchpoint'. Adjust for that.
* basics.c (callee4): Make the function return something,
otherwise the return value is undefined.
Daniel Berlin
Mark Kettenis
Fernando Nasser
Andrew Cagney
Scott Bambrough
Jim Blandy
Peter Schauer
J.T. Conklin
Nicholas Duffek
Eli Zaretskii
H.J. Lu
Kevin Buettner
Philippe De Muyter
Michael Snyder
Jason Merrill
Christopher Faylor
Stan Shebs
Elena Zannoni
Jonathan Larmour
Jim Ingham