The 64-bit version of binutils got support for the PE COFF BIG OBJ format a
couple of years ago. The BIG OBJ format is a slightly different COFF format
which extends the size of the number of section field in the header from a
uint16_t to a uint32_t and so greatly increases the number of sections allowed.
However the 32-bit version of bfd never got support for this. The GHC Haskell
compiler generates a great deal of symbols due to it's use of
-ffunction-sections and -fdata-sections.
This meant that we could not build the 32-bit version of the GHC Compiler for
many releases now as binutils didn't have this support.
This patch adds the support to the 32-bit port of binutils as well and also does
come cleanup in the code.
bfd/ChangeLog:
* coff-i386.c (COFF_WITH_PE_BIGOBJ): New.
* coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New.
* config.bfd (targ_selvecs): Rename x86_64_pe_be_vec
to x86_64_pe_big_vec as it not a big-endian format.
(vec i386_pe_big_vec): New.
* configure.ac: Likewise.
* targets.c: Likewise.
* configure: Regenerate.
* pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG,
COFF_WITH_PE_BIGOBJ): New.
* pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG):
New.
(x86_64_pe_be_vec): Moved.
gas/ChangeLog:
* NEWS: Add news entry for big-obj.
* config/tc-i386.c (i386_target_format): Support new format.
* doc/c-i386.texi: Add i386 support.
* testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
* testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
ld/ChangeLog:
* pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
* config/obj-elf.c (elf_frob_symbol): Unconditionally remove
symbol for ".symver .. remove".
* doc/as.texi (.symver): Update.
* testsuite/gas/symver/symver11.s: Make foo weak.
* testsuite/gas/symver/symver11.d: Expect an error.
* testsuite/gas/symver/symver7.d: Allow other random symbols.
Extend .symver directive to update visibility of the original symbol and
assign one original symbol to different versioned symbols:
.symver foo, foo@VERS_1, local # Change foo to a local symbol.
.symver foo, foo@VERS_2, hidden # Change foo to a hidden symbol.
.symver foo, foo@@VERS_3, remove # Remove foo from symbol table.
.symver foo, bar@V1 # Assign foo to bar@V1 and baz@V2.
.symver foo, baz@V2
PR gas/23840
PR gas/25295
* NEWS: Mention .symver extension.
* config/obj-elf.c (obj_elf_find_and_add_versioned_name): New
function.
(obj_elf_symver): Call obj_elf_find_and_add_versioned_name to
add a version name. Add local, hidden and remove visibility
support.
(elf_frob_symbol): Handle the list of version names. Update the
original symbol to local, hidden or remove it from the symbol
table.
(elf_frob_file_before_adjust): Handle the list of version names.
* config/obj-elf.h (elf_visibility): New.
(elf_versioned_name_list): Likewise.
(elf_obj_sy): Change local to bitfield. Add rename, bad_version
and visibility. Change versioned_name pointer to struct
elf_versioned_name_list.
* doc/as.texi: Update .symver directive.
* testsuite/gas/symver/symver.exp: Run all *.d tests. Add more
error checking tests.
* testsuite/gas/symver/symver6.d: New file.
* testsuite/gas/symver/symver7.d: Likewise.
* testsuite/gas/symver/symver7.s: Likewise.
* testsuite/gas/symver/symver8.d: Likewise.
* testsuite/gas/symver/symver8.s: Likewise.
* testsuite/gas/symver/symver9.s: Likewise.
* testsuite/gas/symver/symver9a.d: Likewise.
* testsuite/gas/symver/symver9b.d: Likewise.
* testsuite/gas/symver/symver10.s: Likewise.
* testsuite/gas/symver/symver10a.d: Likewise.
* testsuite/gas/symver/symver10b.d: Likewise.
* testsuite/gas/symver/symver11.d: Likewise.
* testsuite/gas/symver/symver11.s: Likewise.
* testsuite/gas/symver/symver12.d: Likewise.
* testsuite/gas/symver/symver12.s: Likewise.
* testsuite/gas/symver/symver13.d: Likewise.
* testsuite/gas/symver/symver13.s: Likewise.
* testsuite/gas/symver/symver14.d: Likewise.
* testsuite/gas/symver/symver14.l: Likewise.
* testsuite/gas/symver/symver15.d: Likewise.
* testsuite/gas/symver/symver15.l: Likewise.
* testsuite/gas/symver/symver6.l: Removed.
* testsuite/gas/symver/symver6.s: Updated.
Fix
gas/doc/c-z80.texi:244: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:278: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:284: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:291: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:295: warning: `.' or `,' must follow @xref, not )
* doc/c-z80.texi: Fix @xref warnings.
Add 3 command-line options to generate lfence for load, indirect near
branch and ret to help mitigate:
https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00334.htmlhttp://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-0551
1. -mlfence-after-load=[no|yes]:
-mlfence-after-load=yes generates lfence after load instructions.
2. -mlfence-before-indirect-branch=[none|all|memory|register]:
a. -mlfence-before-indirect-branch=all generates lfence before indirect
near branches via register and a warning before indirect near branches
via memory.
b. -mlfence-before-indirect-branch=memory issue a warning before
indirect near branches via memory.
c. -mlfence-before-indirect-branch=register generates lfence before
indirect near branches via register.
Note that lfence won't be generated before indirect near branches via
register with -mlfence-after-load=yes since lfence will be generated
after loading branch target register.
3. -mlfence-before-ret=[none|or|not]
a. -mlfence-before-ret=or generates or with lfence before ret.
b. -mlfence-before-ret=not generates not with lfence before ret.
A warning will be issued and lfence won't be generated before indirect
near branch and ret if the previous item is a prefix or a constant
directive, which may be used to hardcode an instruction, since there
is no clear instruction boundary.
* config/tc-i386.c (lfence_after_load): New.
(lfence_before_indirect_branch_kind): New.
(lfence_before_indirect_branch): New.
(lfence_before_ret_kind): New.
(lfence_before_ret): New.
(last_insn): New.
(load_insn_p): New.
(insert_lfence_after): New.
(insert_lfence_before): New.
(md_assemble): Call insert_lfence_before and insert_lfence_after.
Set last_insn.
(OPTION_MLFENCE_AFTER_LOAD): New.
(OPTION_MLFENCE_BEFORE_INDIRECT_BRANCH): New.
(OPTION_MLFENCE_BEFORE_RET): New.
(md_longopts): Add -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
(md_parse_option): Handle -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
(md_show_usage): Display -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
* doc/c-i386.texi: Document -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
PR 25611
PR 25614
* dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
li_segment_size fields.
* dwarf.c (read_debug_line_header): Record the address size and
segment selector size values (if present) in the lineinfo
structure.
(display_formatted_table): Warn if the format count is empty but
the table itself is not empty.
Display the format count and entry count at the start of the table
dump.
(display_debug_lines_raw): Display the address size and segement
selector size fields, if present.
* testsuite/binutils-all/dw5.W: Update expected output.
gas * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1.
(DWARF2_FILE_SIZE_NAME): Default to -1.
(DWARF2_LINE_VERSION): Default to the current dwarf level or 3,
whichever is higher.
(DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1.
(NUM_MD5_BYTES): Define.
(struct file entry): Add md5 field.
(get_filenum): Delete and replace with...
(get_basename): New function.
(get_directory_table_entry): New function.
(allocate_filenum): New function.
(allocate_filename_to_slot): New function.
(dwarf2_where): Use new functions.
(dwarf2_directive_filename): Add support for extended .file
pseudo-op.
(dwarf2_directive_loc): Allow the use of file number zero with
DWARF 5 or higher.
(out_file_list): Rename to...
(out_dir_and_file_list): Add DWARF 5 support.
(out_debug_line): Emit extra values into the section header for
DWARF 5.
(out_debug_str): Allow for file 0 to be used with DWARF 5.
* doc/as.texi (.file): Update the description of this pseudo-op.
* testsuite/gas/elf-dwarf-5-file0.s: Add more lines.
* testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output.
* testsuite/gas/lns/lns-diag-1.l: Update expected error message.
* NEWS: Mention the new feature.
PR 25614
* dwarf2dbg.c (dwarf2_directive_filename): Allow a file number of
0 if the dwarf_level is 5 or more. Complain if a filename follows
a file 0.
* testsuite/gas/elf/dwarf-5-file0.s: New test.
* testsuite/gas/elf/dwarf-5-file0.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
PR 25612
* config/tc-ia64.h (DWARF2_VERISION): Fix typo.
* doc/as.texi: Fix another typo.
PR 25612
* as.c (dwarf_level): Define.
(show_usage): Add --gdwarf-3, --gdwarf-4 and --gdwarf-5.
(parse_args): Add support for the new options.
as.h (dwarf_level): Prototype.
* dwarf2dbg.c (DWARF2_VERSION): Use dwarf_level as default version
value.
* config/tc-ia64.h (DWARF2_VERISION): Update definition.
(DWARF2_LINE_VERSION): Remove definition.
* doc/as.texi: Document the new options.
gas/
* config/tc-riscv.c: Support the modifier %got_pcrel_hi.
* doc/c-riscv.texi: Add documentation.
* testsuite/gas/riscv/no-relax-reloc.d: Add test case for the new
modifier %got_pcrel_hi.
* testsuite/gas/riscv/no-relax-reloc.s: Likewise.
* testsuite/gas/riscv/relax-reloc.d: Likewise.
* testsuite/gas/riscv/relax-reloc.s: Likewise.
gas/
* doc/c-riscv.texi (relocation modifiers): Add documentation.
(RISC-V-Formats): Update the section name from "Instruction Formats"
to "RISC-V Instruction Formats".
Add new .option `csr-check/no-csr-check` and GAS option `-mcsr-check
/-mno-csr-check` to enbale/disable the CSR checking. Disable the CSR
checking by default.
gas/
* config/tc-riscv.c: Add new .option and GAS options to enbale/disable
the CSR checking. We disable the CSR checking by default.
(reg_lookup_internal): Check the `riscv_opts.csr_check`
before we doing the CSR checking.
* doc/c-riscv.texi: Add description for the new .option and assembler
options.
* testsuite/gas/riscv/priv-reg-fail-fext.d: Add `-mcsr-check` to enable
the CSR checking.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
AMD ABM has 2 instructions: popcnt and lzcnt. ABM CPUID feature bit has
been reused for lzcnt and a POPCNT CPUID feature bit is added for popcnt
which used to be the part of SSE4.2. This patch removes CpuABM and adds
CpuPOPCNT. It changes ABM to enable both lzcnt and popcnt, changes SSE4.2
to also enable popcnt.
gas/
* config/tc-i386.c (cpu_arch): Add .popcnt.
* doc/c-i386.texi: Remove abm and .abm. Add popcnt and .popcnt.
Add a tab before @samp{.sse4a}.
opcodes/
* i386-gen.c (cpu_flag_init): Replace CpuABM with
CpuLZCNT|CpuPOPCNT. Add CpuPOPCNT to CPU_SSE4_2_FLAGS. Add
CPU_POPCNT_FLAGS.
(cpu_flags): Remove CpuABM. Add CpuPOPCNT.
* i386-opc.h (CpuABM): Removed.
(CpuPOPCNT): New.
(i386_cpu_flags): Remove cpuabm. Add cpupopcnt.
* i386-opc.tbl: Replace CpuABM|CpuSSE4_2 with CpuPOPCNT on
popcnt. Remove CpuABM from lzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
commit 7deea9aad8 changed nosse4 to include CpuSSE4a. But AMD SSE4a is
a superset of SSE3 and Intel SSE4 is a superset of SSSE3. Disable Intel
SSE4 shouldn't disable AMD SSE4a. This patch restores nosse4. It also
adds .sse4a and nosse4a.
gas/
* config/tc-i386.c (cpu_arch): Add .sse4a and nosse4a. Restore
nosse4.
* doc/c-i386.texi: Document sse4a and nosse4a.
opcodes/
* i386-gen.c (cpu_flag_init): Add CPU_ANY_SSE4A_FLAGS. Remove
CPU_ANY_SSE4_FLAGS.
Document different mnemonics of movsx, movsxd and movzx in AT&T syntax.
PR gas/25438
* doc/c-i386.texi: Document movsx, movsxd and movzx for AT&T
syntax.
AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
Commit d835a58baa disabled sysenter/sysenter in 64-bit mode by
default. By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.
gas/
PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.
opcodes/
PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64. Update sysenter/sysenter with
Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
As shown in
https://sourceware.org/bugzilla/show_bug.cgi?id=25490
--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result. This patch adds the section flag 'o' to
.section directive:
.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1
which specifies the symbol name which the section references. Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.
Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.
bfd/
PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.
gas/
PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This. Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.
ld/
PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.
Clang's integrated assembler supports multiple section with the same
name:
.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop
"unique,N" assigns the number, N, as the section ID, to a section. The
valid values of the section ID are between 0 and 4294967295. It can be
used to distinguish different sections with the same section name.
This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.
This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id. It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.
bfd/
PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.
binutils/
PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.
gas/
PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p. Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N". Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
ld/
PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
movsxd is a 64-bit only instruction. It supports both 16-bit and 32-bit
destination registers. Its AT&T mnemonic is movslq which only supports
64-bit destination register. There is also a discrepancy between AMD64
and Intel64 on movsxd with 16-bit destination register. AMD64 supports
32-bit source operand and Intel64 supports 16-bit source operand.
This patch updates movsxd encoding and decoding to alow 16-bit and 32-bit
destination registers. It also handles movsxd with 16-bit destination
register for AMD64 and Intel 64.
gas/
PR binutils/25445
* config/tc-i386.c (check_long_reg): Also convert to QWORD for
movsxd.
* doc/c-i386.texi: Add a node for AMD64 vs. Intel64 ISA
differences. Document movslq and movsxd.
* testsuite/gas/i386/i386.exp: Run PR binutils/25445 tests.
* testsuite/gas/i386/x86-64-movsxd-intel.d: New file.
* testsuite/gas/i386/x86-64-movsxd-intel64-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd.s: Likewise.
opcodes/
PR binutils/25445
* i386-dis.c (MOVSXD_Fixup): New function.
(movsxd_mode): New enum.
(x86_64_table): Use MOVSXD_Fixup and movsxd_mode on movsxd.
(intel_operand_size): Handle movsxd_mode.
(OP_E_register): Likewise.
(OP_G): Likewise.
* i386-opc.tbl: Remove Rex64 and allow 32-bit destination
register on movsxd. Add movsxd with 16-bit destination register
for AMD64 and Intel64 ISAs.
* i386-tbl.h: Regenerated.
Commit b76bc5d54e ("x86: don't default variable shift count insns to
8-bit operand size") pointed out a very bad case, but the underlying
problem is, as mentioned on various occasions, much larger: Silently
selecting a (nowhere documented afaict) certain default operand size
when there's no "sizing" suffix and no suitable register operand(s) is
simply dangerous (for the programmer to make mistakes).
While in Intel syntax mode such mistakes already lead to an error (which
is going to remain that way), AT&T syntax mode now gains warnings in
such cases by default, which can be suppressed or promoted to an error
if so desired by the programmer. Furthermore at least general purpose
insns now consistently have a default applied (alongside the warning
emission), rather than accepting some and refusing others.
No warnings are (as before) to be generated for "DefaultSize" insns as
well as ones acting on selector and other fixed-width values. For
SYSRET, however, the DefaultSize needs to be dropped - it had been
wrongly put there in the first place, as it's unrelated to .code16gcc
(no stack accesses involved).
As set forth as a prereq when I first mentioned this intended change a
few years back, Linux as well as gcc have meanwhile been patched to
avoid (emission of) ambiguous operands (and hence triggering of the new
warning).
Note that I think that in 64-bit mode IRET and far RET would better get
a diagnostic too, as it's reasonably likely that a suffix-less instance
really is meant to be a 64-bit one. But I guess I better make this a
separate follow-on patch.
Note further that floating point operations with integer operands are an
exception for now: They continue to use short (16-bit) operands by
default even in 32- and 64-bit modes.
Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also
need to be diagnosed, with their 64-bit forms not being very useful I
think it is better to continue to avoid warning about them (by way of
them carrying IgnoreSize attributes).
PR 25377
gas * config/tc-z80.c: Add support for half precision, single
precision and double precision floating point values.
* config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes.
* doc/as.texi: Add new z80 command line options.
* doc/c-z80.texi: Document new z80 command line options.
* testsuite/gas/z80/ez80_pref_dis.s: New test.
* testsuite/gas/z80/ez80_pref_dis.d: New test driver.
* testsuite/gas/z80/z80.exp: Run the new test.
* testsuite/gas/z80/fp_math48.d: Use correct command line option.
* testsuite/gas/z80/fp_zeda32.d: Likewise.
* testsuite/gas/z80/strings.d: Update expected output.
opcodes * z80-dis.c (suffix): Use .db instruction to generate double
prefix.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
Add 3 command-line options to align branches within a fixed boundary
with segment prefixes or NOPs:
1. -malign-branch-boundary=NUM aligns branches within NUM byte boundary.
2. -malign-branch=TYPE[+TYPE...] specifies types of branches to align.
The supported branches are:
a. Conditional jump.
b. Fused conditional jump.
c. Unconditional jump.
d. Call.
e. Ret.
f. Indirect jump and call.
3. -malign-branch-prefix-size=NUM aligns branches with NUM segment
prefixes per instruction.
3 new rs_machine_dependent frag types are added:
1. BRANCH_PADDING. The variable size frag to insert NOP before branch.
2. BRANCH_PREFIX. The variable size frag to insert segment prefixes to
an instruction. The choices of prefixes are:
a. Use the existing segment prefix if there is one.
b. Use CS segment prefix in 64-bit mode.
c. In 32-bit mode, use SS segment prefix with ESP/EBP base register
and use DS segment prefix without ESP/EBP base register.
3. FUSED_JCC_PADDING. The variable size frag to insert NOP before fused
conditional jump.
The new rs_machine_dependent frags aren't inserted if the previous item
is a prefix or a constant directive, which may be used to hardcode an
instruction, since there is no clear instruction boundary. Segment
prefixes and NOP padding are disabled before relaxable TLS relocations
and tls_get_addr calls to keep TLS instruction sequence unchanged.
md_estimate_size_before_relax() and i386_generic_table_relax_frag() are
used to handled BRANCH_PADDING, BRANCH_PREFIX and FUSED_JCC_PADDING frags.
i386_generic_table_relax_frag() grows or shrinks sizes of segment prefix
and NOP to align the next branch frag:
1. First try to add segment prefixes to instructions before a branch.
2. If there is no sufficient room to add segment prefixes, NOP will be
inserted before a branch.
* config/tc-i386.c (_i386_insn): Add has_gotpc_tls_reloc.
(tls_get_addr): New.
(last_insn): New.
(align_branch_power): New.
(align_branch_kind): New.
(align_branch_bit): New.
(align_branch): New.
(MAX_FUSED_JCC_PADDING_SIZE): New.
(align_branch_prefix_size): New.
(BRANCH_PADDING): New.
(BRANCH_PREFIX): New.
(FUSED_JCC_PADDING): New.
(i386_generate_nops): Support BRANCH_PADDING and FUSED_JCC_PADDING.
(md_begin): Abort if align_branch_prefix_size <
MAX_FUSED_JCC_PADDING_SIZE.
(md_assemble): Set last_insn.
(maybe_fused_with_jcc_p): New.
(add_fused_jcc_padding_frag_p): New.
(add_branch_prefix_frag_p): New.
(add_branch_padding_frag_p): New.
(output_insn): Generate a BRANCH_PADDING, FUSED_JCC_PADDING or
BRANCH_PREFIX frag and terminate each frag to align branches.
(output_disp): Set i.has_gotpc_tls_reloc to TRUE for GOTPC and
relaxable TLS relocations.
(output_imm): Likewise.
(i386_next_non_empty_frag): New.
(i386_next_jcc_frag): New.
(i386_classify_machine_dependent_frag): New.
(i386_branch_padding_size): New.
(i386_generic_table_relax_frag): New.
(md_estimate_size_before_relax): Handle COND_JUMP_PADDING,
FUSED_JCC_PADDING and COND_JUMP_PREFIX frags.
(md_convert_frag): Handle BRANCH_PADDING, BRANCH_PREFIX and
FUSED_JCC_PADDING frags.
(OPTION_MALIGN_BRANCH_BOUNDARY): New.
(OPTION_MALIGN_BRANCH_PREFIX_SIZE): New.
(OPTION_MALIGN_BRANCH): New.
(md_longopts): Add -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_parse_option): Handle -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_show_usage): Display -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(i386_target_format): Set tls_get_addr.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
(i386_generic_table_relax_frag): New.
(md_generic_table_relax_frag): New.
(i386_tc_frag_data): Add u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
(TC_FRAG_INIT): Initialize u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
* doc/c-i386.texi: Document -malign-branch-boundary=,
-malign-branch= and -malign-branch-prefix-size=.
Add md_generic_table_relax_frag for TC_GENERIC_RELAX_TABLE targets so
that a backend can extend relax_frag beyond TC_GENERIC_RELAX_TABLE.
* write.c (md_generic_table_relax_frag): New. Defined to
relax_frag if not defined.
(relax_segment): Call md_generic_table_relax_frag instead of
relax_frag.
Add a flag to control the version of CIE that is generated. By
default gas produces CIE version 1, and this continues to be the
default after this patch.
However, a user can now provide --gdwarf-cie-version=NUMBER to switch
to either version 3 or version 4 of CIE, version 2 was never released,
and so causes an error as does any number less than 1 or greater than
4.
Producing version 4 CIE requires two new fields to be added to the
CIE, an address size field, and an segment selector field. For a flat
address space the DWARF specification indicates that the segment
selector should be 0, and the address size fields just contains the
address size in bytes. For now we support 4 or 8 byte addresses, and
the segment selector is always produced as 0. At some future time we
might need to allow targets to override this.
gas/ChangeLog:
* as.c (parse_args): Parse --gdwarf-cie-version option.
(flag_dwarf_cie_version): New variable.
* as.h (flag_dwarf_cie_version): Declare.
* dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to
flag_dwarf_cie_version.
* doc/as.texi (Overview): Document --gdwarf-cie-version.
* NEWS: Likewise.
* testsuite/gas/cfi/cfi.exp: Add new tests.
* testsuite/gas/cfi/cie-version-0.d: New file.
* testsuite/gas/cfi/cie-version-1.d: New file.
* testsuite/gas/cfi/cie-version-2.d: New file.
* testsuite/gas/cfi/cie-version-3.d: New file.
* testsuite/gas/cfi/cie-version-4.d: New file.
* testsuite/gas/cfi/cie-version.s: New file.
include/ChangeLog:
* dwarf2.h (DW_CIE_VERSION): Delete.
Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
So far z15 was identified as arch13. After the machine has been
announced we can now add the real name.
gas/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z15 as alternate CPU
name.
* doc/as.texi: Add z15 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Enable z15 as CPU string in the opcode
table.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
Nick Clifton
Tamar Christina
liuhongt
Alan Modra
H.J. Lu
Cui,Lili
Sergey Belyashov
Nelson Chu
Jan Beulich
Matthew Malcomson
Andrew Burgess
Andreas Krebbel
Jozef Lawrynowicz