2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (struct elf32_arm_params): Define.
(bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Use a struct
elf32_arm_params to pass all parameters but the bfd and bfd_link_info.
* bfd-in2.h: Regenerate.
* elf32-arm.c (bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Pass all values via a struct
elf32_arm_params rather than as individual parameters.
ld/
* emultempl/armelf.em (params): New static variable.
(thumb_entry_symbol, byteswap_code, target1_is_rel, target2_type,
fix_v4bx, use_blx, vfp11_denorm_fix, stm32l4xx_fix, fix_cortex_a8,
no_enum_size_warning, no_wchar_size_warning, pic_veneer,
merge_exidx_entries, fix_arm1176, cmse_implib): move as part of the
above new structure.
(arm_elf_before_allocation): Access static variable from the params
structure.
(gld${EMULATION_NAME}_finish): Likewise.
(arm_elf_create_output_section_statements): Likewise and pass the
address of that structure to bfd_elf32_arm_set_target_relocs instead
of the static variables.
(PARSE_AND_LIST_ARGS_CASES): Access static variable from the params
structure.
bfd/
* elf32-arm.c (elf32_arm_get_stub_entry): Assert that we don't access
passed the end of htab->stub_group array.
(elf32_arm_create_or_find_stub_sec): Likewise.
(elf32_arm_create_stub): Likewise.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS,
PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and
their lowecase counterpart special registers. Write register
identifier in hex.
* testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per
operation, special register and then case. Use different register for
each operation. Add tests for new special registers.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result
accordingly.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
opcodes/
* arm-dis.c (psr_name): Use hex as case labels. Add detection for
MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS,
FAULTMASK_NS, CONTROL_NS and SP_NS special registers.
Forgot to set should_relocate to TRUE in case of GOT and TLS relocations of
undefined symbols for shared libraries.
In dynamic libraries if symbol is not known the instruction relocation would
not be resolved to point to the respective .got entry.
A test was created to detect similar future mistakes.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (elf_arc_relocate_section): Changed. Set should_relocate
to TRUE for GOT and TLS relocs.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* ld/testsuite/ld-arc/tls_gd-01.s: Added a testcase for this patch.
* ld/testsuite/ld-arc/tls_gd-01.d: Likewise.
ARC was overloading this options by forcing DT_INIT AND DT_FINI
to always point to _init and _fini, respectively.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synospsys.com>
* elf32-arc.c (elf_arc_finish_dynamic_sections): Changed.
Fixed conditions related to dynamic relocs relative offset patching.
Added arc_link_hash_table to be able to always generate and track
.rela.bss section.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf-bfd.h: Added ARC_ELF_DATA to enum elf_target_id.
* elf32-arc.c (struct elf_arc_link_hash_entry): Added.
(struct elf_arc_link_hash_table): Likewise.
(elf_arc_link_hash_newfunc): Likewise.
(elf_arc_link_hash_table_free): Likewise.
(arc_elf_link_hash_table_create): Likewise.
(elf_arc_relocate_section): Fixed conditions related to dynamic
(elf_arc_check_relocs): Likewise.
(arc_elf_create_dynamic_sections): Added
(elf_arc_adjust_dynamic_symbol): Changed access to .rela.bss to be done
through the hash table.
When no dynamic relocation was generated the .got content would not be
updated for the TLS_IE_GOT relocation addresses.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h (relocate_fix_got_relocs_for_got_info): Fixed addresses in
debug comments. Fixed address in .got related to TLS_IE_GOT dynamic
relocation.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* testsuite/ld-arc/tls_ie-01.s: Added to verify associated fix.
* testsuite/ld-arc/tls_ie-01.d: Likewise
Added support for ARC_SDA_12 reloc.
Fixed ARC_N32_ME.
Added ME (middle-endian) to ARC_SDA_12 reloc.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12
relocation.
* bfd-in2.h: Regenerated from the previous changes.
* libbfd.h: Regenerated from the previous changes.
include/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12,
SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations.
* opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_set_target_relocs): Add a new parameter for
the input import library bfd.
* bfd-in2.h: Regenerate.
* elf32-arm.c (struct elf32_arm_link_hash_table): New in_implib_bfd
and new_cmse_stub_offset fields.
(stub_hash_newfunc): Initialize stub_offset and stub_template_size to
-1.
(elf32_arm_add_stub): Likewise for stub_offset.
(arm_new_stubs_start_offset_ptr): New function.
(arm_build_one_stub): Only allocate a stub_offset if it is -1. Allow
empty SG veneers to have zero relocations.
(arm_size_one_stub): Only initialize stub size and template
information for non empty veneers. Do not update veneer section size
if veneer already has an offset.
(elf32_arm_create_stub): Return the stub entry pointer or NULL instead
of a boolean indicating success or failure.
(cmse_scan): Change stub_changed parameter into an integer pointer
parameter cmse_stub_created to count the number of stub created and
adapt to change of return value in elf32_arm_create_stub.
(cmse_entry_fct_p): New function.
(arm_list_new_cmse_stub): Likewise.
(set_cmse_veneer_addr_from_implib): Likewise.
(elf32_arm_size_stubs): Define cmse_stub_created, pass its address to
cmse_scan instead of that of cmse_stub_changed to compute the number
of stub created and use it to initialize stub_changed. Call
set_cmse_veneer_addr_from_implib after all cmse_scan. Adapt to change
of return value in elf32_arm_create_stub. Use
arm_stub_section_start_offset () if not NULL to initialize size of
secure gateway veneers section. Initialize stub_offset of Cortex-A8
erratum fix to -1. Use ret to hold return value.
(elf32_arm_build_stubs): Use arm_stub_section_start_offset () if not
NULL to initialize size of secure gateway veneers section. Adapt
comment to stress the importance of zeroing veneer section content.
(bfd_elf32_arm_set_target_relocs): Add new in_implib_bfd parameter to
initialize eponymous field in struct elf32_arm_link_hash_table.
ld/
* emultempl/armelf.em (in_implib_filename): Declare and initialize new
variable.
(arm_elf_create_output_section_statements): Open import input library
file for writing and pass resulting in_implib_bfd to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_IN_IMPLIB option.
(PARSE_AND_LIST_LONGOPTS): Define --in-implib option.
(PARSE_AND_LIST_OPTIONS): Add help message for --in-implib option.
(PARSE_AND_LIST_ARGS_CASES): Handle new OPTION_IN_IMPLIB case.
* ld.texinfo (--cmse-implib): Update to mention --in-implib.
(--in-implib): Document new option.
* NEWS: Likewise.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): add --defsym VER=1 to gas
CLI.
(Secure gateway import library generation: errors): Likewise.
(Input secure gateway import library): New test.
(Input secure gateway import library: no output import library):
Likewise.
(Input secure gateway import library: not an SG input import library):
Likewise.
(Input secure gateway import library: earlier stub section base):
Likewise.
(Input secure gateway import library: later stub section base):
Likewise.
(Input secure gateway import library: veneer comeback): Likewise.
(Input secure gateway import library: entry function change):
Likewise.
* testsuite/ld-arm/cmse-implib.s: Add input import library testing.
* testsuite/ld-arm/cmse-implib.rd: Update accordingly.
* testsuite/ld-arm/cmse-new-implib.out: New file.
* testsuite/ld-arm/cmse-new-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-implib-no-output.out: Likewise.
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-earlier-later-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-comeback-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-wrong-implib.out: Likewise.
This enhances the 32-bit and 64-bit s390 ELF backends with support for
reading and writing the core dump note sections NT_PRSTATUS and
NT_PRPSINFO. Byte swapping is done as appropriate, such that core files
can now be processed correctly on non-s390 platforms.
bfd/ChangeLog:
* elf32-s390.c (stdarg.h): New include.
(elf_s390_grok_psinfo): New function.
(elf_s390_write_core_note): New function.
(elf_backend_grok_psinfo): Declare backend hook.
(elf_backend_write_core_note): Likewise.
* elf64-s390.c (stdarg.h): New include.
(elf_s390_grok_prstatus): New function.
(elf_s390_grok_psinfo): New function.
(elf_s390_write_core_note): New function.
(elf_backend_grok_prstatus): Declare backend hook.
(elf_backend_grok_psinfo): Likewise.
(elf_backend_write_core_note): Likewise.
C++ does not officially support designators in initializer lists. Thus
some compilers may issue errors when encountering them. Modern versions
of GCC seem to allow them by default, as a GCC extension, even though
the GCC documentation explicitly states otherwise: "[...] This extension
is not implemented in GNU C++." But some older GCC versions (like
4.4.7) did indeed emit an error instead, like this:
.../gdb/xtensa-config.c:219: error: expected primary-expression before
‘.’ token
This patch removes the only such instance I've seen when building with
'--enable-targets=all'.
gdb/ChangeLog:
* xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
designated initializer list by plain initializer list, for C++
compliance.
This fixes a few problems in the powerpc ld configury.
1) Using powerpc*le-* to test for powerpcle and powerpc64le would
incorrectly match a target triple like powerpc-apple-elf.
2) In the same vein, *64* could match 64 in the user supplied MANUF-OS
part of the target triple.
3) tooldir vars were missing, and some target aliases would result in
ridiculous values for those tdir_* vars given.
4) Since 2016-04-25, BE support was added automatically when asking
for an LE target. If that is a good idea, then so is adding LE
support when asking for BE.
* configure.tgt (powerpc*-*-linux* et al): Rewrite, adding LE
support for BE. First output all target endian configury
values, then opposite endian. Handle more tooldirs. Fix
bogus matches with strings in MANUF-OS part of target triple.
GLIBC BZ#20311 [1] proc_service.h install patch also remove 'const'
attributes from ps_get_thread_area and comment #15 discuss why to remove
the const attribute (basically since it a callback with the struct
ps_prochandle owned by the client it should be able to modify it if
it the case).
On default build this is not the issue and current g++ does not trigger
any issue with this mismatch declaration. However, on some bootstrap
build configuration where gdbserver is build with gcc instead this
triggers:
error: conflicting types for 'ps_get_thread_area'
This patch fixes it by syncing the declaration with GLIBC.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=20311
gdb/ChangeLog:
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64-linux-nat.c (ps_get_thread_area): Remove const from
struct ps_prochandle.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* arm-linux-nat.c (ps_get_thread_area): Likewise.
* gdb_proc_service.h (ps_get_thread_area): Likewise.
* i386-linux-nat.c (ps_get_thread_area): Likewise.
* m68klinux-nat.c (ps_get_thread_area): Likewise.
* mips-linux-nat.c (ps_get_thread_area): Likewise.
* nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
* nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
* xtensa-linux-nat.c (ps_get_thread_area): Likewise.
gdb/gdbserver/ChangeLog:
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
PR server/20491
* gdb_proc_service.h (ps_get_thread_area): Remove const from struct
ps_prochandle.
* linux-aarch64-low.c (ps_get_thread_area): Likewise.
* linux-arm-low.c (ps_get_thread_area): Likewise.
* linux-crisv32-low.c (ps_get_thread_area): Likewise.
* linux-m68k-low.c (ps_get_thread_area): Likewise.
* linux-mips-low.c (ps_get_thread_area): Likewise.
* linux-nios2-low.c (ps_get_thread_area): Likewise.
* linux-tic6x-low.c (ps_get_thread_area): Likewise.
* linux-x86-low.c (ps_get_thread_area): Likewise.
* linux-xtensa-low.c (ps_get_thread_area): Likewise.
This test case verifies that GDB will not attempt to invoke a python
unwinder recursively.
At the moment, the behavior exhibited by GDB looks like this:
(gdb) source py-recurse-unwind.py
Python script imported
(gdb) b ccc
Breakpoint 1 at 0x4004bd: file py-recurse-unwind.c, line 23.
(gdb) run
Starting program: py-recurse-unwind
TestUnwinder: Recursion detected - returning early.
TestUnwinder: Recursion detected - returning early.
TestUnwinder: Recursion detected - returning early.
TestUnwinder: Recursion detected - returning early.
Breakpoint 1, ccc (arg=<unavailable>) at py-recurse-unwind.c:23
23 }
(gdb) bt
#-1 ccc (arg=<unavailable>) at py-recurse-unwind.c:23
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
[I've shortened pathnames for easier reading.]
The desired / expected behavior looks like this:
(gdb) source py-recurse-unwind.py
Python script imported
(gdb) b ccc
Breakpoint 1 at 0x4004bd: file py-recurse-unwind.c, line 23.
(gdb) run
Starting program: py-recurse-unwind
Breakpoint 1, ccc (arg=789) at py-recurse-unwind.c:23
23 }
(gdb) bt
#0 ccc (arg=789) at py-recurse-unwind.c:23
#1 0x00000000004004d5 in bbb (arg=456) at py-recurse-unwind.c:28
#2 0x00000000004004ed in aaa (arg=123) at py-recurse-unwind.c:34
#3 0x00000000004004fe in main () at py-recurse-unwind.c:40
Note that GDB's problems go well beyond the fact that it invokes the
unwinder recursively. In the process it messes up some internal state
(the frame stash) leading to display of (only) the sentinel frame in
the backtrace.
gdb/testsuite/ChangeLog:
* gdb.python/py-recurse-unwind.c: New file.
* gdb.python/py-recurse-unwind.py: New file.
* gdb.python/py-recurse-unwind.exp: New file.
This patch allows the user to set the inferior-tty to "empty", in order
to come back to the default behaviour of using the same tty as gdb is
using.
This is already supported in MI (and tested in gdb.mi/mi-basics.exp).
I added a new test, set-inferior-tty.exp, where I test only the setting
and unsetting of the parameter. It would be nice to actually test that
the inferior output properly goes to the separate tty, but that will be
for another day.
gdb/ChangeLog:
* infcmd.c (set_inferior_io_terminal): Set inferior terminal to
NULL if terminal_name is an empty string.
(_initialize_infcmd): Make the argument of "set inferior-tty"
optional, mention it in the help doc.
gdb/doc/ChangeLog:
* gdb.texinfo (Input/Output): Mention possibility to unset
inferior-tty.
gdb/testsuite/ChangeLog:
* gdb.base/set-inferior-tty.exp: New file.
* gdb.base/set-inferior-tty.c: New file.
It is my understanding that GDB used to require each architecture to
define a Frame Pointer (fp). However, this functionality was deprecated
some time ago so the call to setup the fp_reg was changed to deprecated
(set_gdbarch_deprecated_fp_regnum). It should have been removed from the
Power code.
That said, the code "set_gdbarch_deprecated_fp_regnum
(gdbarch, PPC_R0_REGNUM + 1);" sets up register r1 as the frame pointer.
Register r1 is no longer used to hold the frame pointer on Power. By
removing the fp definition for Power in GDB, it causes GDB to fall back
to the call get_frame_base_address (frame) which returns the correct value
depending on the specific senario but most of the time is the DWARF
canonical frame address.
gdb/ChangeLog
2016-08-24 Carl Love <cel@us.ibm.com>
* rs6000-tdep.c (rs6000_gdbarch_init): Remove call
set_gdbarch_deprecated_fp_regnum() from initialization function.
This patch adds function elf32_arc_grok_parse to parse NOTE section of core
dump files. GDB requires this to work properly with core dumps.
bfd/
2016-08-24 Anton Kolesov <Anton.Kolesov@synopsys.com>
* elf32-arc.c (elf32_arc_grok_prstatus): New function.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
This patch fixes a problem that problem triggers if you start an
inferior, e.g., with the "start" command, in a UI created with the
new-ui command, and then run a foreground execution command in the
main UI. Once the program stops for the latter command, typing in the
main UI no longer echoes back to the user.
The problem revolves around this:
- gdb_has_a_terminal computes its result lazily, on first call.
that is what saves gdb's initial main UI terminal state (the UI
associated with stdin):
our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
This is the state that target_terminal_ours() restores.
- In this scenario, the gdb_has_a_terminal function happens to be
first ever called from within the target_terminal_init call in
startup_inferior:
(top-gdb) bt
#0 gdb_has_a_terminal () at src/gdb/inflow.c:157
#1 0x000000000079db22 in child_terminal_init_with_pgrp () at src/gdb/inflow.c:217
[...]
#4 0x000000000065bacb in target_terminal_init () at src/gdb/target.c:456
#5 0x00000000004676d2 in startup_inferior () at src/gdb/fork-child.c:531
[...]
#7 0x000000000046b168 in linux_nat_create_inferior () at src/gdb/linux-nat.c:1112
[...]
#9 0x00000000005f20c9 in start_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:657
If the command to start the inferior is issued on the main UI, then
readline will have deprepped the terminal when we reach the above, and
the problem doesn't appear.
If however the command is issued on a non-main UI, then when we reach
that gdb_has_a_terminal call, the main UI's terminal state is still
set to whatever readline has sets it to in rl_prep_terminal, which
happens to have echo disabled. Later, when the following synchronous
execution command finishes, we'll call target_terminal_ours to restore
gdb's the main UI's terminal settings, and that restores the terminal
state with echo disabled...
Conceptually, the fix is to move the gdb_has_a_terminal call earlier,
to someplace during GDB initialization, before readline/ncurses have
had a chance to change terminal settings. Turns out that
"set_initial_gdb_ttystate" is exactly such a place.
I say conceptually, because the fix actually inlines the
gdb_has_a_terminal part that saves the terminal state in
set_initial_gdb_ttystate and then simplifies gdb_has_a_terminal, since
there's no point in making gdb_has_a_terminal do lazy computation.
gdb/ChangeLog:
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* inflow.c (our_terminal_info, initial_gdb_ttystate): Update
comments.
(enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
Delete.
(set_initial_gdb_ttystate): Record our_terminal_info here too,
instead of ...
(gdb_has_a_terminal): ... here. Reimplement in terms of
initial_gdb_ttystate. Make static.
* terminal.h (gdb_has_a_terminal): Delete declaration.
(set_initial_gdb_ttystate): Add comment.
* top.c (show_interactive_mode): Use input_interactive_p instead
of gdb_has_a_terminal.
gdb/testsuite/ChangeLog:
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* gdb.base/new-ui-echo.c: New file.
* gdb.base/new-ui-echo.exp: New file.
PR gprof/20499
* corefile.c (BUFSIZE): Define.
(STR_BUFSIZE): Define.
(read_function_mappings): Use BUFSIZE and STR)BUFSIZE.
(num_of_syms_in): Move buf, address and name arrays out of
function and declare as static BUFSIZE arrays.
Use STR_BUFSIZE when scanning for name and address.
(core_create_syms_from): Revert previous delta. Instead
short circuit the parsing of a symbol if all three fields
could not be found.
Hi,
I happen to see gdbserver is spawned like this in gdb.log,
spawn /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../../gdb/gdbserver/gdbserver --once :2346 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.s
erver/connect-stopped-target/connect-stopped-target /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/connect-stopped-target/connect-stopped-t
arget
spawn /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../../gdb/gdbserver/gdbserver --once :2347 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.s
erver/connect-stopped-target/connect-stopped-target /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/connect-stopped-target/connect-stopped-t
arget
as we can see, there are two instances of connect-stopped-target or
connect-stopped-target in the command line spawning gdbserver, but
none of these gets parameters from command line. In these two
tests, gdbserver is spawned via "gdbserver_spawn ${binfile}". However,
the argument of gdbserver_spawn is the argument passed the child
inferior, not the program itself.
# Start a gdbserver process running SERVER_EXEC, and connect GDB
# to it. CHILD_ARGS are passed to the inferior.
#
# Returns the target protocol and socket to connect to.
proc gdbserver_spawn { child_args } {
set target_exec [gdbserver_download_current_prog]
GDBserver gets the program via last_loaded_file, which is set by
gdb_file_cmd. In each test, we don't need to pass ${binfile}.
gdb/testsuite:
2016-08-23 Yao Qi <yao.qi@linaro.org>
* gdb.server/connect-stopped-target.exp (do_test): Pass "" to
gdbserver_spawn.
* gdb.server/connect-without-multi-process.exp (do_test):
Likewise.
Remote testing isn't considered in signals-state-child.exp, so the it
fails like
shell diff -s /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.base/signals-state-child/standalone.txt /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.base/signals-state-child/gdb.txt^M
diff: /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.base/signals-state-child/standalone.txt: No such file or directory^M
(gdb) FAIL: gdb.base/signals-state-child.exp: signals states are identical
This patch is to fix it.
gdb/testsuite:
2016-08-23 Yao Qi <yao.qi@linaro.org>
* gdb.base/signals-state-child.exp: Set variables gdb_txt and
standalone_txt. Delete gdb_txt and standalone_txt on host
and target. Spawn the binary on target. Copy files from
target to host.
For consistency with the previous two patches, this one
adds a macro for the two ARMv8.2 table entries. Both table
entries need a non-null aarch64_op field.
I haven't added macros for the RAS and STAT_PROFILE entries
since there's only one of each. The series isn't getting
rid of braced entries altogether, so I've only looked at
replacing things that occur more than once.
opcodes/
* aarch64-tbl.h (V8_2_INSN): New macro.
(aarch64_opcode_table): Use it.
After the previous patch, this one makes all CORE, FP
and SIMD table entries with null "verify" fields use
the associated macros.
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Make more use of
CORE_INSN, __FP_INSN and SIMD_INSN.
Nick recently wrapped most of aarch64-tbl.h entries in macros
like CORE_INSN. These new macros assumed that the aarch64_op
"op" field of aarch64_opcode is 0 and that the new "verifier"
field is NULL.
However, there are a lot of CORE, SIMD and FP insns whose table
entries need a nonzero aarch64_op field, so these entries
continued to use a braced list instead of a macro. This makes
the table entries less consistent and means that there are still
quite a few braced entries that need to be updated when making
further changes to the aarch64_opcode structure.
I think the number of entries that need a nonzero aarch64_op
field is high enough to justify having an explicit aarch64_op
entry for all CORE, SIMD and FP entries. This patch adds
one and updates all existing uses of the macros. A following
patch makes more use of the macros.
I've followed existing practice by using 0 instead of OP_NIL
for empty aarch64_op fields. Empty fields are still the norm
and you need to know what the fields are when reading the table
anyway, so it was hard to justify an additional patch to replace
all 0 op fields with OP_NIL.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN): Add OP parameter.
(aarch64_opcode_table): Update uses accordingly.
Loading a core dump that was either generated on a system running
pristine glibc master, or on a Fedora/RHEL system with LD_DEBUG=unused
set in the environment, solib-svr4.c:svr4_current_sos fails to filter
out the vDSO, resulting in:
(gdb) core-file corefile.core^M
[New LWP 2362]^M
warning: Could not load shared library symbols for linux-vdso.so.1.^M
Do you need "set solib-search-path" or "set sysroot"?^M
Core was generated by `build-gdb/gdb/testsuite/outputs/gdb.base/corefile/'.^M
...
The problem is that gdbarch_vsyscall_range does not support core
inferiors at all.
When live debugging, we're finding the vDSO's start address with
auxv/AT_SYSINFO_EHDR, and then we find the vDSO's size by look for the
corresponding mapping, by parsing /proc/PID/maps. When debugging a
core dump, we can also determine the starting address from
auxv/AT_SYSINFO_EHDR. However, we obviously can't read the core
mappings out of the host's /proc. But we can instead look for a
corresponding load segment in the core's bfd.
gdb/ChangeLog:
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
find the vDSO's start address with AT_SYSINFO_EHDR too, and
determine the vDSO's size by finding the PT_LOAD segment that
matches AT_SYSINFO_EHDR.
gdb/testsuite/ChangeLog:
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* gdb.base/vdso-warning.exp: Test core dumps too. Use
with_test_prefix. Factor out bits to ...
(test_no_vdso): ... this new procedure.
The pr19784 tests fail on ppc32 due to a gcc bug. The failure should
be noticed when building both libpr19784a.so and libpr19784b.so,
rather than ld building a buggy libpr19784a.so that fails at run time.
This patch fixes that by moving the @local ifunc check out of
check_relocs, where a call destination may not yet be known to be
ifunc. The patch also adds a related error for -mbss-plt code.
* elf32-ppc.c (ppc_elf_check_relocs): Move error for @local ifunc..
(ppc_elf_relocate_section): ..to here. Comment. Error on
detecting -mbss-plt -fPIC local ifuncs too.
(ppc_elf_size_dynamic_sections): Comment on unnecessary glink
branch table entries.
This patch fixes an issues with six test suite expect files that do not
run correctly when the test suite is not built in the source directory. The
issue is these tests are not using the current "standard_testfile" call
but rather using the older set command to initialize the "testfile",
"srcfile" and "binprefix" variables or are missing the set for the
"binprefix" variable.
-----------------------------------------------
gdb/testsuite/ChangeLog
2016-08-19 Carl Love <cel@us.ibm.com>
* gdb.arch/altivec-regs.exp: Use standard_testfile instead of
maintaining separate logic for constructing the output path.
* gdb.arch/powerpc-d128-regs.exp: Likewise.
* gdb.arch/ppc-dfp.exp: Likewise.
* gdb.arch/ppc-fp.exp: Likewise.
* gdb.arch/vsx-regs.exp: Likewise.
* gdb.arch/altivec-abi.exp: Likewise, plus added local variable
binprefix for generating the additional binary files.
Nowadays, we only match pre-indexed STP in prologue. Due to the change
in gcc, https://gcc.gnu.org/ml/gcc-patches/2016-07/msg01933.html, it
may generate "STP with base register" in prologue, which GDB doesn't
handle. That is to say, previously GCC generates prologue like this,
sub sp, sp, #490
stp x29, x30, [sp, #-96]!
mov x29, sp
with the gcc patch above, GCC generates prologue like like this,
sub sp, sp, #4f0
stp x29, x30, [sp]
mov x29, sp
This patch is to teach GDB to recognize this instruction in prologue
analysis.
gdb:
2016-08-19 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Handle register
based STP instruction.
If I build gdb with -fsanitize=address and run tests, I get error,
malformed linespec error: unexpected colon^M
(gdb) PASS: gdb.linespec/ls-errs.exp: lang=C: break :
break :=================================================================^M
==3266==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000051451 at pc 0x2b5797a972a8 bp 0x7fffd8e0f3c0 sp 0x7fffd8e0f398^M
READ of size 2 at 0x602000051451 thread T0
#0 0x2b5797a972a7 in __interceptor_strlen (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x322a7)^M
#1 0x7bd004 in compare_filenames_for_search(char const*, char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:316^M
#2 0x7bd310 in iterate_over_some_symtabs(char const*, char const*, int (*)(symtab*, void*), void*, compunit_symtab*, compunit_symtab*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:411^M
#3 0x7bd775 in iterate_over_symtabs(char const*, int (*)(symtab*, void*), void*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:481^M
#4 0x7bda15 in lookup_symtab(char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:527^M
#5 0x7d5e2a in make_file_symbol_completion_list_1 /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:5635^M
#6 0x7d61e1 in make_file_symbol_completion_list(char const*, char const*, char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:5684^M
#7 0x88dc06 in linespec_location_completer /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:288
....
0x602000051451 is located 0 bytes to the right of 1-byte region [0x602000051450,0x602000051451)^M
mallocated by thread T0 here:
#0 0x2b5797ab97ef in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x547ef)^M
#1 0xbbfb8d in xmalloc /home/yao/SourceCode/gnu/gdb/git/gdb/common/common-utils.c:43^M
#2 0x88dabd in linespec_location_completer /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:273^M
#3 0x88e5ef in location_completer(cmd_list_element*, char const*, char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:531^M
#4 0x8902e7 in complete_line_internal /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:964^
The code in question is here
file_to_match = (char *) xmalloc (colon - text + 1);
strncpy (file_to_match, text, colon - text + 1);
it is likely that file_to_match is not null-terminated. The patch is
to strncpy 'colon - text' bytes and explicitly set '\0'.
gdb:
2016-08-19 Yao Qi <yao.qi@linaro.org>
* completer.c (linespec_location_completer): Make file_to_match
null-terminated.
gdb.trace/mi-trace-frame-collected.exp has a couple failures on x32:
FAIL: gdb.trace/mi-trace-frame-collected.exp: live: -trace-frame-collected (register)
FAIL: gdb.trace/mi-trace-frame-collected.exp: tfile: -trace-frame-collected (register)
gdb.log:
-trace-frame-collected
^done,explicit-variables=[{name="gdb_char_test",value="0 '\\000'"}],computed-expressions=[],registers=[{number="16",value="0x4004dc"},{number="204",value="0x4004dc"}],tvars
=[],memory=[{address="0x00601060",length="1"}]
(gdb)
FAIL: gdb.trace/mi-trace-frame-collected.exp: live: -trace-frame-collected (register)
[...]
-trace-frame-collected
^done,explicit-variables=[{name="gdb_char_test",value="0 '\\000'"}],computed-expressions=[],registers=[{number="16",value="0x4004dc"},{number="204",value="0x4004dc"}],tvars
=[],memory=[{address="0x00601060",length="1"}]
(gdb)
FAIL: gdb.trace/mi-trace-frame-collected.exp: tfile: -trace-frame-collected (register)
This test only collects the PC, and thus expects to only see one
register in the output of -trace-frame-collected. However, while on
the 64-bit ABI gdb only exposes 64-bit $pc/$rip (register 16 above),
on x32, GDB exposes 32-bit $eip as well, as a pseudo-register
(register 204 above). Thus, collecting $pc/$rip automatically always
collects $eip as well.
gdb/testsuite/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* gdb.trace/mi-trace-frame-collected.exp
(test_trace_frame_collected): On x32, expect two registers.