Correct a regression introduced with commit 919731affb ("Add MIPS
.module directive") causing code like:
.set mips3
dli $2, 0x9000000080000000
to fail assembly with the following error message produced:
Error: number (0x9000000080000000) larger than 32 bits
if built with `mips3' selected as the global ISA (e.g. `-march=mips3').
This is because a `.set' directive doing an ISA override does not lift
the ABI restriction on register sizes if the ISA remains unchanged.
Previously the directive always set register sizes from the ISA chosen,
which is what some code expects. Restore the old semantics then.
gas/
* config/tc-mips.c (code_option_type): New enum.
(parse_code_option): Return status indicating option type.
(s_mipsset): Update `parse_code_option' call site accordingly.
Always set register sizes from the ISA with ISA overrides.
(s_module): Update `parse_code_option' call site.
* testsuite/gas/mips/isa-override-1.d: New test.
* testsuite/gas/mips/micromips@isa-override-1.d: New test.
* testsuite/gas/mips/mips1@isa-override-1.d: New test.
* testsuite/gas/mips/mips2@isa-override-1.d: New test.
* testsuite/gas/mips/mips32@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r2@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r3@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r5@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r6@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r2@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r3@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r5@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r6@isa-override-1.d: New test.
* testsuite/gas/mips/r3000@isa-override-1.d: New test.
* testsuite/gas/mips/r3900@isa-override-1.d: New test.
* testsuite/gas/mips/r5900@isa-override-1.d: New test.
* testsuite/gas/mips/octeon@isa-override-1.d: New test.
* testsuite/gas/mips/octeon3@isa-override-1.d: New test.
* testsuite/gas/mips/isa-override-2.l: New list test.
* testsuite/gas/mips/mips1@isa-override-2.l: New list test.
* testsuite/gas/mips/mips2@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r2@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r3@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r5@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r6@isa-override-2.l: New list test.
* testsuite/gas/mips/r3000@isa-override-2.l: New list test.
* testsuite/gas/mips/r3900@isa-override-2.l: New list test.
* testsuite/gas/mips/octeon3@isa-override-2.l: New list test.
* testsuite/gas/mips/octeon3@isa-override-1.l: New stderr
output.
* testsuite/gas/mips/isa-override-1.s: New test source.
* testsuite/gas/mips/r5900@isa-override-1.s: New test source.
* testsuite/gas/mips/isa-override-2.s: New test source.
* testsuite/gas/mips/mips1@isa-override-2.s: New test source.
* testsuite/gas/mips/mips2@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r2@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r3@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r5@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r6@isa-override-2.s: New test source.
* testsuite/gas/mips/r3000@isa-override-2.s: New test source.
* testsuite/gas/mips/r3900@isa-override-2.s: New test source.
* testsuite/gas/mips/octeon3@isa-override-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add nps400 to the list of acceptable values for the -mcpu command line
switch, and to the .cpu directive.
I've added an extra cross reference from -mcpu to .cpu to improve
navigation of the documentation.
gas/ChangeLog:
* doc/c-arc.texi (ARC Options): Add nps400 to list of valus for
-mcpu. Add cross reference to .cpu directive from -mcpu option.
(ARC Directives): Add NPS400 to .cpu directive list.
The RAS extension was introduced as part of the ARMv8.2 architecture
where it is a required feature. It is also available as an optional
feature for ARMv8 and ARMv8.1. In binutils, the RAS extension is
currently enabled by default for -march=armv8.2-a but is not available
for -march=armv8 or -march=armv8.1-a.
This patch adds the feature extension '+ras' to enable the RAS extension
for ARMv8 and ARMv8.1, it is disabled by default.
gas/
2016-04-20 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "ras".
* doc/c-aarch64.texi (AArch64 Extensions): Add "ras".
* testsuite/gas/aarch64/armv8-ras-1.d: New.
* testsuite/gas/aarch64/armv8-ras-1.s: New.
* testsuite/gas/aarch64/illegal-ras-1.d: New.
* testsuite/gas/aarch64/illegal-ras-1.s: New.
Change-Id: I824fb9bc8cf846bcc03aa17a726efb1350d78b9d
This reverts commit 9a452709fe.
This change was committed as obvious, but it has been rightly been
pointed out to me that this change is not obvious, and as such I am
reverting it.
gas/ChangeLog:
Revert prevous change.
* config/tc-arc.c (arc_option): Make .cpu directive
case-sensitive again.
Presumably this was supposed to be regname[sizeof (regname) - 1] but was typoed
to regname[sizeof (rename) - 1]. However that should be unnecessary because
sprintf should null terminate. As is this assignment is invalid ISO C because
rename refers to the function rename (), and sizeof on functions is undefined.
In GNU C C the size of functions is 1 so the expression is the same as
regname[0]. The following call to sprintf () clearly will over right that, so
the statement either has no effect or is invalid. Given that it seems safe to
just remove it. While we are there correct the size of regname, and switch
from snprintf to sprintf since we know the exact length of the result.
gas/ChangeLog:
2016-04-15 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-mips.c (md_begin): Remove useless assignment.
They are only used in one file, so we might as well restrict there scope to
that file, and theoretically this might slightly improve compilers ability to
optimize usage of these variables.
gas/ChangeLog:
2016-04-14 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-nios2.c (nios2_as_options): Make file static.
* config/tc-ppc.c (toc_reloc_ypes): Likewise.
* config/tc-sparc.c (native_op_table): Likewise.
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
We were running a slightly different set of assembler tests on big and
little endian arc targets. This commit unifies the set of tests run.
gas/ChangeLog:
* testsuite/gas/arc/add_s-err.s: Update target pattern.
* testsuite/gas/arc/warn.s: Likewise.
* testsuite/gas/elf/elf.exp: Run test for arc.
PR target/19938
bfd * elf-bbfd.h (struct elf_backend_data): New field:
elf_strtab_flags.
New field: elf_backend_set_special_section_info_and_link
* elfxx-target.h (elf_backend_strtab_flags): Define if not already
defined.
(elf_backend_set_special_section_info_and_link): Define if not
already defined.
(elfNN_bed): Use elf_backend_set_special_section_info_and_link and
elf_backend_strtab_flags macros to initialise fields in structure.
* elf.c (_bfd_elf_make_section_from_shdr): Check for SHF_STRINGS
being set even if SHF_MERGE is not set.
(elf_fake_sections): Likewise.
(section_match): New function. Matches two ELF sections based
upon fixed characteristics.
(find_link): New function. Locates a section in a BFD that
matches a section in a different BFD.
(_bfd_elf_copy_private_bfd_data): Copy the sh_info and sh_link
fields of reserved sections.
(bfd_elf_compute_section_file_positions): Set the flags for the
.shstrtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
(swap_out_syms): Likewise for the .strtab section.
* elflink.c (bfd_elf_final_link): Set the flags for the
.strtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
* elf32-i386.c (elf32_i386_set_special_info_link): New function.
(elf_backend_strtab_flags): Set to SHF_STRINGS for Solaris
targets.
(elf_backend_set_special_section_info_and_link): Define for
Solaris targets.
* elf32-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.
binutils* testsuite/binutils-all/i386/compressed-1b.d: Allow for the
string sections possibly having the SHF_STRINGS flag bit set.
* testsuite/binutils-all/i386/compressed-1c.d: Likewise.
* testsuite/binutils-all/readelf.s: Likewise.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/x86-64/compressed-1b.d: Likewise.
* testsuite/binutils-all/x86-64/compressed-1c.d: Likewise.
gas * testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string
sections possibly having the SHF_STRINGS flag bit set.
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
gas/
2016-04-12 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (mach_type_specified_p): Change type to
bfd_boolean.
(arc_option): Set private flags when parsing cpu pseudo-op.
(md_parse_option): Set mach_type_specified_p to TRUE.
PR target/19937
opcode * v850-opc.c (v850_opcodes): Correct masks for long versions of
the LD.B and LD.BU instructions.
gas * testsuite/gas/v850/pr19937.s: New test.
* testsuite/gas/v850/pr19937.d: New test control file.
* testsuite/gas/v850/basic.exp: Run the new test.
Weak symbols can be preempted at link time so always choose the longer
sequence in branch relaxation, according to the relaxation level chosen,
so that any symbol finally used as the branch target is reachable.
2016-04-13 Maciej W. Rozycki <macro@imgtec.com>
Andrew Bennett <andrew.bennett@imgtec.com>
gas/
* config/tc-mips.c (relaxed_branch_length): Use the long
sequence where the target is a weak symbol.
(relaxed_micromips_32bit_branch_length): Likewise.
(relaxed_micromips_16bit_branch_length): Likewise.
* testsuite/gas/mips/branch-weak-1.d: New test.
* testsuite/gas/mips/branch-weak-2.d: New test.
* testsuite/gas/mips/branch-weak-3.d: New test.
* testsuite/gas/mips/branch-weak-4.d: New test.
* testsuite/gas/mips/branch-weak-5.d: New test.
* testsuite/gas/mips/branch-weak.l: New stderr output.
* testsuite/gas/mips/branch-weak.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Where branch relaxation is enabled emit the long sequence for branches
whose distance cannot be determined, i.e. to symbols that are undefined
or in a different segment. These symbols are only resolved at link time
and therefore the longer sequence ensures the branch target is in range,
which cannot be guaranteed with a direct branch.
This is the opposite to the current implementation, originally proposed
here: <https://sourceware.org/ml/binutils/2002-09/msg00218.html>. The
proposal was then extensively discussed before the final version was
posted here: <https://sourceware.org/ml/binutils/2002-10/msg00191.html>
and eventually committed:
commit 4a6a3df43d
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Sat Oct 12 05:23:33 2002 +0000
The case considered here was not commented in the review however and the
original version remains. With branch relaxation enabled it makes more
sense to do it consistently, so that all code impure with respect to
branch distances can be linked. Direct branches are still produced for
the cases concerned where branch relaxation is disabled, which is the
default.
gas/
* config/tc-mips.c (relaxed_branch_length): Use the long
sequence where the distance cannot be determined.
(relaxed_micromips_32bit_branch_length): Likewise.
* testsuite/gas/mips/branch-extern-1.d: New test.
* testsuite/gas/mips/branch-extern-2.d: New test.
* testsuite/gas/mips/branch-extern-3.d: New test.
* testsuite/gas/mips/branch-extern-4.d: New test.
* testsuite/gas/mips/branch-extern.l: New stderr output.
* testsuite/gas/mips/branch-extern.s: New test source.
* testsuite/gas/mips/branch-section-1.d: New test.
* testsuite/gas/mips/branch-section-2.d: New test.
* testsuite/gas/mips/branch-section-3.d: New test.
* testsuite/gas/mips/branch-section-4.d: New test.
* testsuite/gas/mips/branch-section.l: New stderr output.
* testsuite/gas/mips/branch-section.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
gas/
* config/tc-mips.c (s_option): Sanitize `.option picX'
pseudo-op.
* testsuite/gas/mips/option-pic-1.d: New test.
* testsuite/gas/mips/option-pic-2.l: New list test.
* testsuite/gas/mips/option-pic-1.s: New test source.
* testsuite/gas/mips/option-pic-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
gas/
* config/tc-mips.c (s_option): Reject `.option picX' if VxWorks
PIC.
* testsuite/gas/mips/option-pic-vxworks-1.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-2.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-1.s: New test source.
* testsuite/gas/mips/option-pic-vxworks-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add some new control instructions to the opcodes library, and a new test
for these new instructions to the assembler. The new instructions use
an instruction flag longer than any seen before (on arc), and so the max
flag length is extended to accommodate this.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
* testsuite/gas/arc/nps400-2.d: New file.
* testsuite/gas/arc/nps400-2.s: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
* arc-opc.c (arc_flag_operands): Add new flags.
(arc_flag_classes): Add new classes.
This commit completes support for having multiple instructions with the
same mnemonic in non-contiguous blocks within the arc_opcodes table.
The commit adds an iterator mechanism for the arc_opcode_hash_entry
structure, which is then used in find_opcode_match to consider all
arc_opcode entries with the same mnemonic, even when these instructions
are stored in non-contiguous blocks.
I extend the comment on the arc_opcodes table to discuss how entries
within the table are organised, and to mention how instructions can be
split into multiple groups if needed, but that the table is still
searched in table order.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New
structure.
(arc_opcode_hash_entry_iterator_init): New function.
(arc_opcode_hash_entry_iterator_next): New function.
(find_opcode_match): Iterate over all arc_opcode entries
referenced by the arc_opcode_hash_entry passed in as a parameter.
opcodes/ChangeLog:
* arc-opc.c (arc_opcodes): Extend comment to discus table layout.
Building on earlier commits, this commit moves along support for having
multiple arc_opcode entries in the arc_opcodes table that have the same
mnemonic (name) field, but are not stored in a contiguous block in the
table.
In this commit we support looking up the arc_opcode_hash_entry from the
hash table, and passing this along to the find_opcode_match function,
which then finds the specific arc_opcode that we're assembling. We
still don't actually support the multiple chains of arc_opcode entries
in this commit, but the limitation is now isolated to the
find_opcode_match function.
There is no user visible change after this commit.
gas/ChangeLog:
* config/tc-arc.c (arc_find_opcode): Now returns
arc_opcode_hash_entry pointer.
(find_opcode_match): Update argument type, extract arc_opcode from
incoming arc_opcode_hash_entry.
(find_special_case_pseudo): Update return type.
(find_special_case_flag): Update return type.
(find_special_case): Update return type.
(assemble_tokens): Lookup arc_opcode_hash_entry based on
instruction mnemonic, then use find_opcode_match to identify
specific arc_opcode.
The arc assembler builds a hash table to hold references to arc_opcode
entries in the arc_opcodes table. This hash assumes that each mnemonic
will always appear in a contiguous blocks within the arc_opcodes table;
all ADD instruction will be together, all AND instructions will likewise
be together and so on.
The problem with this is that as different variations of arc are added,
then it is often more convenient to split instructions apart, so all the
base ADD instructions are together, but, variants of ADD specific to one
variation of arc are grouped with other instructions specific to that
arc variant. The current data structures don't support splitting the
instructions in this way.
This commit is a first step towards addressing this limitation. In this
commit the hash table that currently holds arc_opcode pointers directly,
instead holds a pointer to a new, intermediate, data structure. This
new data structure holds the pointer to the arc_opcode. In this way, we
can, in the future support having the intermediate structure hold
multiple pointers to different arc_opcode groups.
There should be no visible functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry): New structure.
(arc_find_opcode): New function.
(find_special_case_pseudo): Use arc_find_opcode.
(find_special_case_flag): Likewise.
(assemble_tokens): Likewise.
(md_begin): Build hash using struct arc_opcode_hash_entry.
An upcoming commit will add a new arc instruction flag that uses
characters that have never appeared in an arc instruction flag before.
Currently the assembler is very conservative about which characters can
or cannot appear in an instruction flag.
This commit relaxes these constraints a little. After this commit all
alpha-numeric characters are now allowed into instruction flags. This
complete set is not required for the upcoming change, however, having
this slightly larger set does not impact the assemblers ability to
correctly parse input, but does make it easier to add new flag to the
instruction table.
gas/ChangeLog:
* config/tc-arc.c (tokenize_flags): Allow greater range of
characters into flag names.
The preprocess_operands function changes the incoming list of assembler
tokens based on the assumption that the first arc_operand found will be
the same instruction class as all of the arc_operands for the same
mnemonic.
Though this assumption is probably fine, removing this assumption, and
pushing the token change down into assemble_tokens makes the code no
more complex, and might even be easier to follow.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Handle O_symbol case, add
new de_fault label.
(preprocess_operands): Delete.
(assemble_tokens): Remove call to preprocess_operands.
PR gas/19910
* config/tc-sparc.c (sparc_ip): Report an error if the expression
inside a %-macro could not be fully parsed.
* expr.c (integer_constant): Accept and ignore U suffixes to
integers.
(operand): When a missing closing parenthesis is encountered,
report the character that was found instead.
* testsuite/gas/mips/tls-ill.l: Update expected error message.
* testsuite/gas/sparc/pr19910-1.d: New test driver.
* testsuite/gas/sparc/pr19910-1.s: New test.
* testsuite/gas/sparc/pr19910-2.l: Expected error output.
* testsuite/gas/sparc/pr19910-2.s: New test.
* testsuite/gas/sparc/sparc.exp: Run the new tests.
* config/tc-msp430.c (msp430_operands): Check for a NOP preceding
an EINT instruction. Warn/fix as necessary.
* testsuite/gas/msp430/bad.s: Add test of EINT without preceding NOP.
* testsuite/gas/msp430/bad.l: Update expected messages.
Claudiu Zissulescu
Pitchumani Sivanupandi
Alan Modra
Maciej W. Rozycki
Trevor Saunders
Andrew Burgess
Matthew Wahab
Martin Galvan
H.J. Lu
Nick Clifton
James Greenhalgh