Complement commit 74ed0bb414 ("Replace current_gdbarch in *mips*"),
<https://sourceware.org/ml/gdb-patches/2008-06/msg00490.html>, and
consistently use the MIPS_FPU_TYPE macro to access the `->mips_fpu_type'
target-dependent `gdbarch' member. No functional change.
gdb/
* mips-tdep.c (mips_gdbarch_init): Use MIPS_FPU_TYPE to access
`->mips_fpu_type'.
This fixes a segfault when trying to access the local_plt field in the
s390 specific elf data althoug the underlaying object is a generic elf
object.
This fixes the following testsuite failures:
< FAIL: plugin claimfile replace symbol with source
< FAIL: plugin claimfile resolve symbol with source
< FAIL: plugin claimfile replace file with source
< FAIL: plugin set symbol visibility with source
< FAIL: plugin ignore lib with source
< FAIL: plugin claimfile replace lib with source
< FAIL: plugin 2 with source lib
< FAIL: load plugin 2 with source
< FAIL: plugin 3 with source lib
< FAIL: load plugin 3 with source
bfd/ChangeLog:
2017-08-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf32-s390.c (elf_s390_finish_dynamic_sections): Skip if it
isn't the S/390 specific elf data.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.
There is a very small but non-zero probability that a stub group
contains stubs on one relax pass, but does not on the next. In that
case we would get an FDE covering a zero length address range.
(Actually, it's even worse. Alignment padding for stubs can mean the
address for the non-existent stubs is past the end of the original
section to which stubs are attached, and due to the way
do_plt_fde_location calculates the length we can get a negative
length.) Fixing this properly requires removing the FDE.
Also, I have been implementing the __tls_get_addr_opt support for
gold, and that stub needs something other than the default FDE. The
necessary FDE will depend on the offset to the __tls_get_addr_opt
stub, which of course can change during relaxation. That means at the
very least, rewriting the FDE on each pass, possibly changing the FDE
size. I think that is better done by completely recreating PLT
eh_frame FDEs.
* ehframe.cc (Fde::operator==): New.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): New.
* ehframe.h (Fde::operator==): Declare.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): Likewise.
* layout.cc (Layout::remove_eh_frame_for_plt): New.
* layout.h (Layout::remove_eh_frame_for_plt): Declare.
* powerpc.cc (Target_powerpc::do_relax): Remove old eh_frame FDEs.
(Stub_table::add_eh_frame): Delete eh_frame_added_ condition.
Don't add eh_frame for empty stub section.
(Stub_table::remove_eh_frame): New.
This adds a --no-tls-optimize option for people who want to keep
__tls_get_addr calls in an executable rather than optimizing such code
sequences to IE/LE.
Also tidy some formatting errors, rename a variable to better reflect
its use, and tweak two functions that create pairs of GOT entries to
first check whether the GOT entry already exists before potentially
inserting the header via reserve(2). Without the check it is possible
to waste one GOT entry.
* options.h (no_tls_optimize): New powerpc option.
* powerpc.cc (Target_powerpc::abiversion, set_abiversion): Formatting.
(Target_powerpc::stk_toc): Formatting, fix comment.
(Target_powerpc::Track_tls::tls_get_addr_state): Rename from
tls_get_addr.
(Target_powerpc::optimize_tls_gd, optimize_tls_ld, optimize_tls_ie):
Return TLSOPT_NONE when !tls_optimize.
(Target_powerpc::add_global_pair_with_rel): Check
for existing reloc before reserving.
(Target_powerpc::add_local_tls_pair): Likewise.
The rot agent expression bytecode rotates the three items on the top of
the stack. It is not clear which way the rotation is. However, the
documentation currently shows this as the effect of the instructions:
a b c => c b a
which doesn't make sense, since the value b doesn't move. The two
valid possibilities I see are
a b c => b c a
a b c => c a b
depending on which way you rotate.
When looking at the gdbserver code, the top of the stack becomes the
third item, and the next-to-top item becomes the top. So the second
form would be the right one, since in this notation the top of the stack
is the rightmost element:
a b c => c a b
I adjusted the symbolic description and added a bit of text to make it
more obvious.
gdb/doc/ChangeLog:
* agentexpr.texi (rot): Fix symbolic description, improve
textual description.
This makes ld warn about --plt-localentry if a version of glibc
without the necessary ld.so checks is detected, and revises the
documentation.
bfd/
* elf64-ppc.c (ppc64_elf_tls_setup): Warn on --plt-localentry
without ld.so checks.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Warn on --plt-localentry
without ld.so checks.
ld/
* ld.texinfo (plt-localentry): Revise.
The big comment in ppc64_elf_tls_setup says why. I've also added some
code to the bfd linker that catches the -lpthread -lc symbol
differences and disable generation of optimized call stubs even when
--plt-localentry is activated. Gold doesn't yet have that.
PR 21847
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Add non_zero_localentry.
(ppc64_elf_merge_symbol): Set non_zero_localentry.
(is_elfv2_localentry0): Test non_zero_localentry.
(ppc64_elf_tls_setup): Default to --no-plt-localentry.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Default to
--no-plt-localentry.
ld/
* ld.texinfo (plt-localentry): Document.
The 64-bit ELF compression header has a reserved field. It should be
cleared to avoid random bits in it.
elfcpp/
PR gold/21857
* elfcpp.h (Chdr_write): Add put_ch_reserved.
(Chdr_write<64, true>::put_ch_reserved): New.
(Chdr_write<64, false>::put_ch_reserved): Likewise.
gold/
PR gold/21857
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Call put_ch_reserved to clear the reserved field for 64-bit ELF.
* ldgram.y (ldgram_had_keep): Make static.
(ldgram_vers_current_lang): Likewise.
(filename_spec): New rule.
(input_section_spec_no_keep): Use filename_spec.
(wildcard_maybe_exclude): New rule.
(wildcard_spec): Rename to...
(section_name_spec): ...this.
(section_NAME_list): Rename to...
(section_name_list): ...this.
(section_name_spec): Simplifiy and use wildcard_maybe_exclude.
* ldlang.c (placed_commons): Delete.
(lang_add_wild): No longer set placed_commons.
(print_wild_statement): Use full names for SORT specifiers.
* testsuite/ld-scripts/align.exp: Run new tests.
* testsuite/ld-scripts/align3.d: New file.
* testsuite/ld-scripts/align3.t: New file.
* testsuite/ld-scripts/align4.d: New file.
* testsuite/ld-scripts/align4.t: New file.
* testsuite/ld-scripts/align5.d: New file.
* testsuite/ld-scripts/align5.t: New file.
* testsuite/ld-scripts/exclude-file-5.d: New file.
* testsuite/ld-scripts/exclude-file-5.map: New file.
* testsuite/ld-scripts/exclude-file-5.t: New file.
* testsuite/ld-scripts/exclude-file-6.d: New file.
* testsuite/ld-scripts/exclude-file-6.map: New file.
* testsuite/ld-scripts/exclude-file-6.t: New file.
* NEWS: Mention the changes.
PR 21840
* mach-o.c (bfd_mach_o_read_symtab_strtab): Fail if the symtab
size is -1.
* nlmcode.h (nlm_swap_auxiliary_headers_in): Replace assertion
with error return.
* section.c (bfd_make_section_with_flags): Fail if the name or bfd
are NULL.
* vms-alpha.c (bfd_make_section_with_flags): Correct computation
of end pointer.
(evax_bfd_print_emh): Check for invalid string lengths.
GCC 4.2 fails to compile "(uint64_t) 0x800080008000" with
error: integer constant is too large for ‘long’ type
This patch adds "llu" suffix to 0x800080008000 for GCC 4.2.
* mips.cc (Mips_relocate_functions): Add "llu" suffix to
0x800080008000.
Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions. These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).
This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.
gdb/testsuite:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".
Instead of using pre-generated target descriptions, this patch
changes GDB to lazily and dynamically create target descriptions
according to the target hardware capability (xcr0 in i386).
This support any combination of target features.
Some reg in target description has "regnum" attribute, so its register
number is got from the attribute value instead from sequential allocation.
<reg name="xmm0" bitsize="128" type="vec128" regnum="32"/>
when target description is created, it should match the regnum, so this
patch adds a new field m_next_regnum to track it, if attribute number is
greater than the m_next_regnum, print the code to set register number
explicitly.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* i386-linux-tdep.c: Don't include features/i386/i386-*linux.c.
Include features/i386/32bit-*.c.
(i386_linux_read_description): Generate target description if it
doesn't exist.
(_initialize_i386_linux_tdep): Don't call _initialize_tdesc_i386
functions.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-sse.c: Likewise.
* target-descriptions.c (print_c_feature::visit): Print code to
set register number if needed.
(print_c_feature) <m_next_regnum>: New field.
This patch changes Makefile and command "maint print c-files" so
that GDB can print c files for features instead target description.
Previously, we feed GDB a target description xml file, which generate
c files including multiple features.
With this patch, in Makefile, we wrap each feature xml file, and
create a temp target description which include only one feature.
Then, adjust the target description printer for them, and print
a c function for each given feature, so that we can use these
c functions later to create target description in a flexible way.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* features/Makefile (CFILES): Rename with TDESC_CFILES.
(FEATURE_XMLFILES): New.
(FEATURE_CFILES): New.
New rules.
(clean-cfiles): Remove generated c files.
* features/i386/32bit-avx.c: Generated.
* features/i386/32bit-avx512.c: Generated.
* features/i386/32bit-core.c: Generated.
* features/i386/32bit-linux.c: Generated.
* features/i386/32bit-mpx.c: Generated.
* features/i386/32bit-pkeys.c: Generated.
* features/i386/32bit-sse.c: Generated.
* target-descriptions.c: Include algorithm.
(tdesc_element_visitor): Add method visit_end.
(print_c_tdesc): Implement visit_end.
(print_c_tdesc:: m_filename_after_features): Move it to
protected.
(print_c_feature): New class.
(maint_print_c_tdesc_cmd): Use print_c_feature if XML file
name starts with "i386/32bit-".
This patch moves all the tdesc_i386*_linux target descriptions to a
function i386_linux_read_description, which returns the right target
description according to xcr0. This also remove the duplication in
getting target descriptions in corefile and native target.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* i386-linux-tdep.c (i386_linux_read_description): New function.
(i386_linux_core_read_description): Call
i386_linux_read_description.
* i386-linux-tdep.h (i386_linux_read_description): Declare.
(tdesc_i386_linux, tdesc_i386_mmx_linux): Remove declarations.
(tdesc_i386_avx_linux, tdesc_i386_mpx_linux): Likewise
(tdesc_i386_avx_mpx_linux, tdesc_i386_avx_avx512_linux): Likewise.
(tdesc_i386_avx_mpx_avx512_pku_linux): Likewise.
* x86-linux-nat.c (x86_linux_read_description): Call
i386_linux_read_description.
Nowadays, we need two steps to print c files for xml target description,
that is, 1) read xml target description in, update the current tdesc,
2) visit the current tdesc, print the c file. It is unnecessary to
involve in current tdesc, and some validations in each gdbarch are
performed unnecessarily, which will reject some target descriptions if
they are missing some mandatory feature.
This patch adds an optional argument to "maint print c-tdesc", which
is an XML file target description, so that we can combine the two
steps above into one step, and don't have to involve in global current
tdesc.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention it.
* features/Makefile (%.c: %.xml): Pass the xml file name to
command "maint print c-tdesc".
* target-descriptions.c (maint_print_c_tdesc_cmd): Get file
name from 'arg'.
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document optional
argument of "maint print c-tdesc".
This patch adds ctor and dtor in target_desc.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* target-descriptions.c (target_desc): Add ctor and dtor. Do
in-class initialization.
(tdesc_create_feature): Call new instead of XCNEW.
(free_target_description): Ue delete.
I got confused by the result value of fast_tracepoint_collecting, while
it sounds like it would return true/false (whether the thread is
collecting or not), it actually returns:
0: not collecting
1: in the jump pad, before the relocated instruction
2: in the jump pad, at or after the relocated instruction
To avoid confusion, I think it would be nice to make it return an enum.
If you can help find a shorter but still relavant name, it would be
awesome. Otherwise, we'll go with that, fast_tpoint_collect_result,
which is at least consistent with the existing
fast_tpoint_collect_status.
gdb/gdbserver/ChangeLog:
* tracepoint.h (enum class fast_tpoint_collect_result): New
enumeration.
(fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
* tracepoint.c (fast_tracepoint_collecting): Likewise.
* linux-low.h: Include tracepoint.h.
(struct lwp_info) <collecting_fast_tracepoint>: Change type to
fast_tpoint_collect_result.
* linux-low.c (handle_tracepoints): Adjust.
(linux_fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
(maybe_move_out_of_jump_pad, linux_wait_for_event_filtered,
linux_wait_1, stuck_in_jump_pad_callback,
lwp_signal_can_be_delivered, linux_resume_one_lwp_throw,
proceed_one_lwp): Adjust to type change.
- Add the '-lkvm' library requirement for NetBSD/sparc64.
- Fix spelling of 'nbsdelf' host.
gdb/Changelog:
* configure.nat: Add "-lkvm" for NetBSD/sparc64 and fix typo.
H.J. Lu
Nick Clifton
Max Filippov
Alan Modra
GDB Administrator
Maciej W. Rozycki
Andreas Krebbel
Richard Henderson
John David Anglin
Kuan-Lin Chen
Xavier Roirand
Marty Plummer
Simon Marchi
Andrew Burgess
Andrew Waterman
Georg-Johann Lay
Yao Qi
John Baldwin