We can't use c99 without enabling c99 support for older compilers
that don't enable c99 by default. So if you want to use c99 contructs
in binutils you'll need to first arrange for -std=c99 to be passed to
older compilers.
* elfxx-riscv.c (riscv_multi_letter_ext_valid_p): Don't use C99.
try_load_plugin is updated to take either plugin name or plugin entry.
load_plugin is updated to search bfd-plugins directories first to build
a list of plugins and call try_load_plugin with each plugin on the list.
When --plugin is used, the plugin list only has one entry.
* plugin.c (try_load_plugin): Make plugin_list_iter an argument
and use it if it isn't NULL. Remove has_plugin_p argument. Add
a build_list_p argument. Don't search plugin_list. Short circuit
when building the plugin list.
(has_plugin): Renamed to has_plugin_list.
(bfd_plugin_set_plugin): Don't set has_plugin.
(bfd_plugin_specified_p): Check plugin_list instead.
(build_plugin_list): New function.
(load_plugin): Call build_plugin_list and use plugin_list.
Since plugin treats each object as independent, we must do a fresh dlopen
of plugin for each object.
PR binutils/25355
* plugin.c (try_claim): Always clean up for LTO wrapper.
(try_load_plugin): Treat each object as independent. Create a
copy for plugin name.
GCC LTO wrapper is needed to extract real symbols from LTO IR objects.
This patch does the following:
1. Set up GCC LTO wrapper for each LTO IR object.
2. Run GCC LTO wrapper to get the real object.
3. Extract symbol info from the real object.
4. Cleanup afterwards.
bfd/
PR binutils/25355
* configure.ac (HAVE_EXECUTABLE_SUFFIX): New AC_DEFINE.
(EXECUTABLE_SUFFIX): Likewise.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c (bfd_plugin_close_and_cleanup): Removed.
(plugin_list_entry): Add all_symbols_read, cleanup_handler,
gcc, lto_wrapper, resolution_file, resolution_option, gcc_env,
real_bfd, real_nsyms, real_syms, lto_nsyms and lto_syms.
(get_lto_wrapper): New.
(setup_lto_wrapper_env): Likewise.
(current_plugin): Likewise.
(register_all_symbols_read): Likewise.
(register_cleanup): Likewise.
(get_symbols): Likewise.
(add_input_file): Likewise.
(bfd_plugin_close_and_cleanup): Likewise.
(claim_file): Removed.
(register_claim_file): Set current_plugin->claim_file.
(add_symbols): Make a copy of LTO symbols. Set lto_nsyms and
lto_syms in current_plugin.
(try_claim): Use current_plugin->claim_file. Call LTO plugin
all_symbols_read handler. Copy real symbols to plugin_data.
Call LTO plugin cleanup handler. Clean up for LTO wrapper.
(try_load_plugin): Don't reuse the previous plugin for LTO
wrapper. Set up GCC LTO wrapper if possible. Don't set
plugin_list_iter->claim_file.
(bfd_plugin_canonicalize_symtab): Use real LTO symbols if
possible.
* plugin.h (plugin_data_struct): Add real_bfd, real_nsyms and
real_syms.
ld/
PR binutils/25355
* testsuite/ld-plugin/lto.exp: Run PR binutils/25355 test.
* testsuite/ld-plugin/pr25355.c: New file.
* testsuite/ld-plugin/pr25355.d: Likewise.
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Support compile
only dump.
This patch fixes execution failures which occur when the BR in a
sequence such as:
J<cond> 1f
BR
1:
is relaxed to a JMP, and the pc-relative offset for the destination of
the J<cond> instruction is hard-coded to be 2 words ahead of the
instruction.
The hard-coded offset will cause execution to jump 1 word ahead of where
it should actually go.
Instead we now detect the hard-coded offset is one we inserted earlier,
and invert the condition, allowing us to remove the BR entirely.
bfd/ChangeLog:
2020-02-10 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* elf32-msp430.c (msp430_elf_relax_section): Before relaxing a branch,
check if previous instruction matches a conditional jump inserted
earlier. Invert conditional jump and delete branch in this case.
This patch fixes relocation overflows caused by an inability to relax
unconditional JMP instructions to BR instructions.
bfd/ChangeLog:
2020-02-10 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* elf32-msp430.c (msp430_elf_relax_add_two_words): Rename to
msp430_elf_relax_add_words. Support insertion of either one or two
words.
(msp430_elf_relax_section): Catch opcode of 0x3c00 when relocation
needs to be grown. Handle insertion of branch instruction to replace
jump.
bfd-in2.h didn't match what was in archures.c and reloc.c. This
fixes overlong comment lines and regenerates bfd-in2.h.
* archures.c: Wrap overlong z80 comments.
* bfd-in2.h: Regenerate.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
__patchable_function_entries section is generated by a compiler with
-fpatchable-function-entry=XX. The assembly code looks like this:
---
.text
.globl _start
.type _start, %function
_start:
.section __patchable_function_entries,"aw",%progbits
.dc.a .LPFE1
.text
.LPFE1:
.byte 0
---
But --gc-sections will silently remove __patchable_function_entries
section and generate corrupt result. This patch disallows garbage
collection on __patchable_function_entries section without linked-to
section.
bfd/
PR ld/25490
* elflink.c (_bfd_elf_gc_mark_extra_sections): Issue an error
for garbage collection on __patchable_function_entries section
without linked-to section.
ld/
PR ld/25490
* testsuite/ld-elf/pr25490-1.d: New file.
* testsuite/ld-elf/pr25490-1.s: Likewise.
As shown in
https://sourceware.org/bugzilla/show_bug.cgi?id=25490
--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result. This patch adds the section flag 'o' to
.section directive:
.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1
which specifies the symbol name which the section references. Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.
Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.
bfd/
PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.
gas/
PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This. Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.
ld/
PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.
Correctly point at `insn[2]' rather than `insn[4]' in determining that
the third instruction from where an R_V850_LONGJUMP relocation points at
is not a recognized one, fixing a problem with commit 86aba9dbfa ("Add
linker relaxation to v850 toolchain") resulting in a build failure like:
.../bfd/elf32-v850.c: In function 'v850_elf_relax_section':
.../bfd/elf32-v850.c:3854:5: error: 'insn[4]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
3854 | _bfd_error_handler
| ^~~~~~~~~~~~~~~~~~
3855 | /* xgettext:c-format */
| ~~~~~~~~~~~~~~~~~~~~~~~
3856 | (_("%pB: %#" PRIx64 ": warning: %s points to "
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3857 | "unrecognized insn %#x"),
| ~~~~~~~~~~~~~~~~~~~~~~~~~
3858 | abfd,
| ~~~~~
3859 | (uint64_t) (irel->r_offset + no_match),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3860 | "R_V850_LONGJUMP",
| ~~~~~~~~~~~~~~~~~~
3861 | insn[no_match]);
| ~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Makefile:1608: recipe for target 'elf32-v850.lo' failed
make[4]: *** [elf32-v850.lo] Error 1
with GCC 10.
bfd/
* elf32-v850.c (v850_elf_relax_section): Fix the index used for
reporting an unrecognized instruction with R_V850_LONGJUMP.
It is incorrect to "continue" in the ppc_elf_relocate_section reloc
processing loop except when editing or deleting relocs. The normal
loop processing arranges to write the relocs if shuffling them over a
deleted entry. Deleting only happens for debug sections currently and
those sections won't contain R_PPC_VLE_ADDR20 relocs, so this patch
doesn't fix a bug that would trigger with any normal object file.
* elf32-ppc.c (ppc_elf_relocate_section): After applying
R_PPC_VLE_ADDR20, goto copy_reloc.
Clang's integrated assembler supports multiple section with the same
name:
.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop
"unique,N" assigns the number, N, as the section ID, to a section. The
valid values of the section ID are between 0 and 4294967295. It can be
used to distinguish different sections with the same section name.
This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.
This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id. It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.
bfd/
PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.
binutils/
PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.
gas/
PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p. Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N". Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
ld/
PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
There's already existing logic to handle this on other targets, so
this patch just makes nios2 use it.
2020-01-31 Sandra Loosemore <sandra@codesourcery.com>
bfd/
* elf-eh-frame.c (_bfd_elf_write_section_eh_frame): DW_EH_PE_datarel
encodings are relative to the GOT on nios2, too.
This patch removes the leak of Nick's source directory into bfd.pot,
and emits #line for some generated files so that those files aren't
referenced by comments in the .pot file. You can see both of these
effects in the following diff. I've also removed use of an
unnecessary temp file in the make rules.
@@ -92,10 +92,8 @@ msgstr ""
#: elf64-nfp.c:238 elf64-ppc.c:1014 elf64-ppc.c:1349 elf64-ppc.c:1358
#: elf64-s390.c:328 elf64-s390.c:378 elf64-x86-64.c:285 elfn32-mips.c:3786
#: elfxx-ia64.c:324 elfxx-riscv.c:955 elfxx-sparc.c:589 elfxx-sparc.c:639
-#: elfxx-tilegx.c:912 elfxx-tilegx.c:952
-#: /work/sources/binutils/current/bfd/elfnn-aarch64.c:2215
-#: /work/sources/binutils/current/bfd/elfnn-aarch64.c:2313 elf32-ia64.c:214
-#: elf32-ia64.c:3862 elf64-ia64.c:214 elf64-ia64.c:3862
+#: elfxx-tilegx.c:912 elfxx-tilegx.c:952 elfnn-aarch64.c:2215
+#: elfnn-aarch64.c:2313 elfnn-ia64.c:214 elfnn-ia64.c:3862
#, c-format
msgid "%pB: unsupported relocation type %#x"
msgstr ""
* Makefile.am (elf32-target.h, elf64-target.h): Don't use a temp
file. Use $< and $@ in rules.
(elf32-aarch64.c, elf64-aarch64.c): Likewise.
(elf32-ia64.c, elf64-ia64.c): Likewise.
(elf32-riscv.c, elf64-riscv.c): Likewise.
(peigen.c, pepigen.c, pex64igen.c): Likewise.
(elf32-aarch64.c, elf64-aarch64.c): Don't emit $srcdir on #line.
(elf32-riscv.c, elf64-riscv.c): Likewise, and use $(SED).
(elf32-ia64.c, elf64-ia64.c): Do emit #line.
(peigen.c, pepigen.c, pex64igen.c): Likewise.
* Makefile.in: Regenerate.
We alloc, seek and read using section sizes in object files. Fuzzed
objects can have silly sizes, but that's OK if the system supports
memory over-commit. The read fails because we hit EOF and that
usually results in a graceful exit.
But if we memset before the read then the invalid size results in
attempting to write to a huge number of memory pages, and an eventual
Out Of Memory after probably swapping like crazy. So don't memset.
There really isn't a need to clear the section contents anyway. All
bytes are written with a good object file by the read and following
loop converting section index in target order to ELF section header
pointer, and the only untidy bytes are the 4 bytes past the group
flags when pointers are 8 bytes. Those don't matter but the patch
clears them for anyone poking around in a debugger. On error paths
it's as good to free section contents as it is to clear them.
Noticed when looking at PR4110 fourth test case.
PR 4110
* elf.c (setup_group): Don't clear entire section contents,
just the padding after group flags. Release alloc'd memory
after a seek or read failure.
These are produced by MSVC when the '/Brepro' flag is used.
To quote from the PE specification [1]:
"The presence of an entry of type IMAGE_DEBUG_TYPE_REPRO indicates the
PE file is built in a way to achieve determinism or reproducibility. If
the input does not change, the output PE file is guaranteed to be
bit-for-bit identical no matter when or where the PE is produced.
Various date/time stamp fields in the PE file are filled with part or
all the bits from a calculated hash value that uses PE file content as
input, and therefore no longer represent the actual date and time when a
PE file or related specific data within the PE is produced. The raw data
of this debug entry may be empty, or may contain a calculated hash value
preceded by a four-byte value that represents the hash value length."
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* peXXigen.c (pe_is_repro): New function.
(_bfd_XX_print_private_bfd_data_common): Note timestamp is
actually a build hash if PE_IMAGE_DEBUG_TYPE_REPRO is present.
IMAGE_DEBUG_TYPE_REPRO is defined in the latest version of the PE
specification [1]. The others are defined in Windows SDK headers and/or
reported by DUMPBIN.
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* peXXigen.c (debug_type_names): Add names for new debug data type
values.
include/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* coff/internal.h (PE_IMAGE_DEBUG_TYPE_VC_FEATURE)
(PE_IMAGE_DEBUG_TYPE_POGO, PE_IMAGE_DEBUG_TYPE_ILTCG)
(PE_IMAGE_DEBUG_TYPE_MPX, PE_IMAGE_DEBUG_TYPE_REPRO): Add.
Use a separate iteration variable for inner loop (😊). This
generally prevented any debug directory entries after a
IMAGE_DEBUG_TYPE_CODEVIEW entry from being reported.
Don't leak the memory allocated for the section containing the debug
directory.
bfd/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* peXXigen.c (pe_print_debugdata): Fix the iteration variable for
inner loop. Fix a memory leak.
Maciej reported a problem found by his RISC-V gdbserver port.
warning: while parsing target description (at line 4): Target description specified unknown architecture "riscv:rv64id"
warning: Could not load XML target description; ignoring
We only have two arches defined, riscv:rv32 and riscv:rv64. Both bfd and
gdb are creating arch strings that have extension letters added to the base
architecture. The bfd_default_scan function requires an exact match, so
these strings fail to map to a bfd_arch. I think we should ignore the
extension letters in a RISC-V specific scan function.
bfd/
* cpu-riscv.c (riscv_scan): New.
(N): Change bfd_default_scan to riscv_scan.
Change-Id: I096476705e1da5cb8934c5005b1eed2a8989f7a7
Looking at older versions of the patch, I confirmed that the odd comment
I referred to earlier was indeed from the removal of the sx support. It
also explains an oddly formatted switch statement. This patch fixes both
minor problems.
bfd/
* elfxx-riscv.c (riscv_get_prefix_class): Format s case like others.
(riscv_parse_prefixed_ext): Fix s extension comment and reword to
avoid over long line.
Change-Id: I1cb62e4a16188270f029b6376e4b1684000d6c7a
PR 25447
* coffgen.c (_bfd_coff_close_and_cleanup): Do not clear the keep
syms and keep strings flags as these may have been set in order to
prevent a bogus call to free.
bfd/
2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
* bfd/elfnn-riscv.c (riscv_skip_prefix): New.
(riscv_prefix_cmp): Likewise.
(riscv_non_std_ext_p): Deleted.
(riscv_std_sv_ext_p): Likewise.
(riscv_non_std_sv_ext_p): Likewise.
(riscv_merge_non_std_and_sv_ext): Rename to...
(riscv_merge_multi_letter_ext): and modified to use riscv_prefix_cmp.
(riscv_merge_arch_attr_info): Replace 3 calls to
riscv_merge_non_std_and_sv_ext with single call to
riscv_merge_multi_letter_ext.
* bfd/elfxx-riscv.c (riscv_parse_std_ext): Break if we
encounter a 'z' prefix.
(riscv_get_prefix_class): New function, return prefix class based
on first few characters of input string.
(riscv_parse_config): New structure to factor out minor differences
in extension class parsing behaviour.
(riscv_parse_sv_or_non_std_ext): Rename to...
(riscv_parse_prefixed_ext): and parameterise with
riscv_parse_config.
(riscv_std_z_ext_strtab, riscv_std_s_ext_strtab): New.
(riscv_multi_letter_ext_valid_p): New.
(riscv_ext_x_valid_p, riscv_ext_z_valid_p, riscv_ext_s_valid_p): New.
(riscv_parse_subset): Delegate all non-single-letter parsing work
to riscv_parse_prefixed_ext.
* bfd/elfxx-riscv.h (riscv_isa_ext_class): New type.
(riscv_get_prefix_class): Declare.
gas/
2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
* testsuite/gas/riscv/march-ok-s.d: sx is no longer valid and
s exts must be known, so rename *ok* to *fail*.
* testsuite/gas/riscv/march-ok-sx.d: Likewise.
* testsuite/gas/riscv/march-ok-s-with-version: Likewise.
* testsuite/gas/riscv/march-fail-s.l: Expected error messages for
above change.
* testsuite/gas/riscv/march-fail-sx.l: Likewise.
* testsuite/gas/riscv/march-fail-sx-with-version.l: Likewise.
Change-Id: Ic4d91a13d055a10d30ab28752a380a669b59f29c
This provides a linker generated __tls_get_addr_desc wrapper function
preserving registers around a __tls_get_addr call. The idea being to
support __tls_get_addr_desc without requiring a glibc update.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_group.
(ppc64_elf_archive_symbol_lookup): Extract __tls_get_addr_opt for
__tls_get_addr_desc.
(ppc64_elf_size_stubs): Add section for linker generated
__tls_get_addr_desc wrapper function. Loop at least once if
generating this function.
(emit_tga_desc, emit_tga_desc_eh_frame): New functions.
(ppc64_elf_build_stubs): Generate __tls_get_addr_desc.
ld/
* testsuite/ld-powerpc/tlsdesc3.d,
* testsuite/ld-powerpc/tlsdesc3.wf,
* testsuite/ld-powerpc/tlsdesc4.d,
* testsuite/ld-powerpc/tlsdesc4.s,
* testsuite/ld-powerpc/tlsdesc4.wf: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
This implements register saving and restoring in the __tls_get_addr
call stub, so that when glibc supports the optimized tls call stub gcc
can generate code that assumes only r0, r12 and of course r3 are
changed on a __tls_get_addr call. When gcc expects __tls_get_addr
calls to preserve registers the call will be to __tls_get_addr_desc,
which will be translated by the linker to a call to __tls_get_addr_opt.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add no_tls_get_addr_regsave.
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_desc and
tga_desc_fd.
(is_tls_get_addr): Match tga_desc and tga_desc_df too.
(STDU_R1_0R1, ADDI_R1_R1): Define.
(tls_get_addr_prologue, tls_get_addr_epilogue): New functions.
(ppc64_elf_tls_setup): Set up tga_desc and tga_desc_fd. Indirect
tga_desc_fd to opt_fd, and tga_desc to opt. Set
no_tls_get_addr_regsave.
(branch_reloc_hash_match): Add hash3 and hash4.
(ppc64_elf_tls_optimize): Handle tga_desc_fd and tga_desc too.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
(plt_stub_size, build_plt_stub): Likewise. Size regsave
__tls_get_addr stub.
(build_tls_get_addr_stub): Build regsave __tls_get_addr stub and
eh_frame.
(ppc_size_one_stub): Handle tga_desc_fd and tga_desc too. Size
eh_frame for regsave __tls_get_addr.
gas/
* config/tc-ppc.c (parse_tls_arg): Handle tls arg for
__tls_get_addr_desc and __tls_get_addr_opt.
ld/
* emultempl/ppc64elf.em (ppc64_opt, PARSE_AND_LIST_LONGOPTS),
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Support
--tls-get-addr-regsave and --no-tls-get-addr-regsave.
(params): Init new field.
* ld.texi (--tls-get-addr-regsave, --no-tls-get-addr-regsave):
Document.
* testsuite/ld-powerpc/tlsdesc.s,
* testsuite/ld-powerpc/tlsdesc.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsexenors.d,
* testsuite/ld-powerpc/tlsexenors.r,
* testsuite/ld-powerpc/tlsexers.d,
* testsuite/ld-powerpc/tlsexers.r,
* testsuite/ld-powerpc/tlsexetocnors.d,
* testsuite/ld-powerpc/tlsexetocrs.d,
* testsuite/ld-powerpc/tlsexetocrs.r,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
When linking with --no-tls-optimize the linker doesn't generate a call
or long branch stub to __tls_get_addr in some circumstances, giving:
relocation truncated to fit: R_PPC64_REL24 against symbol `__tls_get_addr'
* elf64-ppc.c (ppc64_elf_size_stubs): Correct condition under
which __tls_get_addr calls will be eliminated.
This modifies the special __tls_get_addr stub that checks for a
tlsdesc style __tls_index entry and returns early. Not using r11
isn't much benefit at the moment but a followup patch will preserve
regs around the first call to __tls_get_addr when the __tls_index
entry isn't yet set up for an early return.
bfd/
* elf64-ppc.c (LD_R11_0R3, CMPDI_R11_0, STD_R11_0R1, LD_R11_0R1),
(MTLR_R11): Don't define.
(LD_R0_0R3, CMPDI_R0_0): Define.
(build_tls_get_addr_stub): Don't use r11 in stub.
ld/
* testsuite/ld-powerpc/tlsexe.d: Match new __tls_get_addr stub.
* testsuite/ld-powerpc/tlsexeno.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsexetocno.d: Likewise.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
Function symbols of course don't normally want .dynbss copies but
with some old versions of gcc they are needed to copy the function
descriptor. This patch restricts the cases where they are useful to
compilers using dot-symbols, and enables the warning regardless of
whether a PLT entry is emitted in the executable. PLTs in shared
libraries are affected by a .dynbss copy in the executable.
bfd/
PR 25384
* elf64-ppc.c (ELIMINATE_COPY_RELOCS): Update comment.
(ppc64_elf_adjust_dynamic_symbol): Don't allow .dynbss copies
of function symbols unless dot symbols are present. Do warn
whenever one is created, regardles of whether a PLT entry is
also emitted for the function symbol.
ld/
* testsuite/ld-powerpc/ambiguousv1b.d: Adjust expected output.
* testsuite/ld-powerpc/funref.s: Align func_tab.
* testsuite/ld-powerpc/funref2.s: Likewise.
* testsuite/ld-powerpc/funv1.s: Add dot symbols.
I thought the fuzzers were really going overboard by defining
VMS_DEBUG but that wasn't the case. VMS_DEBUG is defined by
default. Let's not do that, and fix the segv as well.
* vms.h (VMS_DEBUG): Define as 0.
* vms-alpha.c (image_write): Move debug output after bounds check.
Tidy bounds check.
(_bfd_vms_slurp_eihd): Warning fix.
(_bfd_vms_slurp_etir): Init variables to avoid bogus warnings.
It's always a bad idea to perform arithmetic on an unknown value read
from an object file before comparing against bounds. Code like the
following attempting to bounds check "len", a 64-bit value, isn't
effective because the pointer arithmetic ignores the high 32 bits when
compiled for a 32-bit host.
READ_LEB128 (len, p, end);
if (p + len < p || p + len > end)
goto error_return;
Instead, perform any arithmetic on known values where we don't need to
worry about overflows:
READ_LEB128 (len, p, end);
if (len > (size_t) (end - p))
goto error_return;
I'll note that this check does do things the right way:
READ_LEB128 (symcount, p, end);
/* Sanity check: each symbol has at least two bytes. */
if (symcount > payload_size / 2)
return FALSE;
"symcount * 2 > payload_size" would be wrong since the multiply could
overflow.
* wasm-module.c (wasm_scan_name_function_section): Formatting.
Delete asect name check. Move asect NULL check to wasm_object_p.
Correct bounds check of sizes against end. Replace uses of
bfd_zalloc with bfd_alloc, zeroing only necessary bytes. Use
just one bfd_release.
(wasm_scan): Don't use malloc/strdup for section names,
bfd_alloc instead. Simplify code prefixing section name.
Formatting. Don't attempt to free memory here..
(wasm_object_p): ..do so here. Formatting.
With static PIE linking undefined weak symbols are resolved to 0, so no
dynamic relocation is needed for them. The UNDEFWEAK_NO_DYNAMIC_RELOC
macro was introduced so this case can be handled easily, but it was not
applied consistently in the first attempt to fix ld/22269 for arm:
commit 95b03e4ad6
arm: Check UNDEFWEAK_NO_DYNAMIC_RELOC
This patch fixes spurious relative relocs in static PIE binaries against
GOT entries created for undefined weak symbols on arm*-*, this fixes
FAIL: pr22269-1 (static pie undefined weak)
bfd/ChangeLog:
PR ld/22269
* elf32-arm.c (elf32_arm_final_link_relocate): Use
UNDEFWEAK_NO_DYNAMIC_RELOC.
(allocate_dynrelocs_for_symbol): Likewise.
This changes the fix to PR 25210 by removing the ELF class change.
As it turns out the correct change was only the change in compress.c.
Everything else is unneeded and setting the elf class is making the linker
behave very oddly under LTO. The first stub is correctly written out but for
the rest the suddenly don't have a pointer to the stub section anymore.
This caused SPEC to fail as the program would branch to the stub and it wouldn't
be filled in.
Committed to master under the trivial rule as this is partially reverting a previous commit.
bfd/ChangeLog:
PR 25210
* elfnn-aarch64.c (_bfd_aarch64_create_stub_section): Remove elfclass.
Since 1993-11-05 git commit c188b0bec3, bfd_check_format has failed
if any of the target object_p functions returns false with any error
but bfd_error_wrong_format. That's just weird. There is really no
reason why coff_real_object_p should be fixed to only return that
error instead of numerous other possible errors. Even an out of
memory condition for one target doesn't necessarily mean other targets
can't match, assuming the failing target nicely returns all memory it
might have used.
* format.c (bfd_check_format_matches): Ignore bfd_error on target
match failures. Don't init to bfd_error_wrong_format before
calling _bfd_check_format.
BFD is not supposed to exit or abort on anything the user can do.
* vms-alpha.c (_bfd_vms_push, _bfd_vms_pop): Return pass/fail
status rather than exiting on stack overflow or underflow.
(_bfd_vms_slurp_etir): Adjust to suit.
Fixes lots of places the fuzzers are going to find, and the one they
already hit.
* mach-o.c (bfd_mach_o_read_dylinker): Don't read past end of
command. Check name offset is within command.
(bfd_mach_o_read_dylib, bfd_mach_o_read_prebound_dylib),
(bfd_mach_o_read_prebind_cksum, bfd_mach_o_read_twolevel_hints),
(bfd_mach_o_read_fvmlib, bfd_mach_o_read_dysymtab),
(bfd_mach_o_read_symtab, bfd_mach_o_read_uuid),
(bfd_mach_o_read_linkedit, bfd_mach_o_read_str),
(bfd_mach_o_read_dyld_info, bfd_mach_o_read_version_min),
(bfd_mach_o_read_encryption_info, bfd_mach_o_read_source_version),
(bfd_mach_o_read_encryption_info_64, bfd_mach_o_read_main),
(bfd_mach_o_read_note, bfd_mach_o_read_build_version),
(bfd_mach_o_read_segment): Similarly.
(bfd_mach_o_read_thread): Properly bound check thread struct.
Don't repeat checks on second loop.
(bfd_mach_o_read_command): Fail on invalid command length.
It's a little tricky. We can release any memory back when we have a
match failure, but after a match success which we might want to
preserve for later use the high water mark must change to that of the
matched bfd.
* format.c (bfd_check_format_matches): Add preserve_match.
Save initial bfd state in "preserve", matched bfd state in
"preserve_match". Save just the first match. Release
bfd_alloc memory. Restore and finish preserved state as
appropriate on all function exit paths.
object_p functions cannot allocate memory by malloc and not free it
before returning. Even a successful target match may not be the best
match. If a match isn't used then those malloc'd blocks won't be
freed.
* coffgen.c (coff_real_object_p): Free malloc'd memory on target
match too.
PR 25307
(bfd_pef_parse_function_stubs): Correct the test that ensures that
there is enough data remaining in the code buffer before
attempting to read a function stub.
ld/PR25316
* elfnn-ia64.c (elfNN_ia64_merge_private_bfd_data): don't fail
on binary inputs ld/PR25316.
(is_ia64_elf): new helper to filter on ia64 objects.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
This fixes PR 25210 by specifying the the correct ELF class for AArch64 stubs.
After doing this the stub section starts behaving like a normal object file
loaded from disk. That is SEC_LINKER_CREATED causes us to have to write the
section manually.
This flag was added as a fix for PR 24753. I believe that
fix to still be correct as linker created sections don't have a size on disk
and it fixes the Arm bootstrap regression. But in this case specifying the
correct section class also makes the stub section not be considered by
compress.c.
So I'm partially revert this change so that we don't have to manage the section
manually as implied by SEC_LINKER_CREATED.
bfd/ChangeLog:
PR 25210
PR 24753
* elfnn-aarch64.c (_bfd_aarch64_create_stub_section): Set ELF class.
ld/ChangeLog:
PR 25210
PR 24753
* emultempl/aarch64elf.em (elf${ELFSIZE}_aarch64_add_stub_section):
Remove SEC_LINKER_CREATED.
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum835769-843419.
* testsuite/ld-aarch64/erratum835769-843419.d: New test.
This fixes yet more errors in the alpha-vms buffer size checks.
* vms-alpha.c (_bfd_vms_slurp_eisd): Don't overflow when checking
offset. Don't overflow when checking rec_size, and do allow
rec_size to the end of the buffer. Ensure eisd->type can be
accessed, not just the first 32 bytes. Don't call
_bfd_vms_save_counted_string with zero length remaining. Fail
on empty string section name.
(_bfd_vms_slurp_egsd): Formatting. Catch more reads past end
of record size. Correct remaining length calculation. Fail
on empty string section name. Consolidate error paths.
Quite a few bfd_zalloc calls are wasting time clearing memory, and
should be bfd_alloc instead.
* archive.c (do_slurp_bsd_armap): Use bfd_alloc rather than
bfd_zalloc when memory is all written after the call.
(do_slurp_coff_armap): Likewise. Set bfd_error on ridiculously
large allocations that overflow bfd_size_type. Use just one
bfd_release on error exit.
(_bfd_slurp_extended_name_table): Use bfd_alloc for extended_names,
clear last byte rather than the entire array. Use bfd_alloc for
string table. Rearrange and simplify code copying file names.
* vms-alpha.c (_bfd_vms_slurp_egsd): Make base_addr a bfd_vma.
Limit alignment power. Correct and simplify alignment expression.
(evax_bfd_print_relocation_records): Avoid signed shift left.
Triggered by overflow of size calulation resulting in a too small
buffer. The testcase found one of the som_bfd_count_ar_symbols
problems.
* som.c (setup_sections): Don't overflow space_strings_size. Use
bfd_malloc2 to catch overflow of size calculation.
(som_prep_for_fixups): Use bfd_zalloc2 to catch overflow of size
calculation.
(som_build_and_write_symbol_table): Similarly use bfd_zmalloc2.
(som_slurp_symbol_table): Similarly use bfd_zmalloc2, bfd_malloc2,
and bfd_zalloc2.
(bfd_som_attach_aux_hdr): Use size_t vars for string length.
(som_bfd_count_ar_symbols): Use bfd_malloc2 to catch overflow of
size calculation. Use size_t vars for length and catch overflow.
(som_slurp_armap): Use bfd_alloc2 to catch overflow of size
calculation.
(som_bfd_ar_write_symbol_stuff): Similarly use bfd_zmalloc2 and
bfd_malloc2. Perform size calculations in bfd_size_type.
Two buffer overflows, and some over restrictive length checks.
* vms-alpha.c (add_symbol): Add "max" parameter. Error on string
length larger than max.
(_bfd_vms_slurp_egsd): Ensure record is at least large enough to
read string length byte, error if not. Pass size to add_symbol.
(_bfd_vms_slurp_etir): Don't read past end of buffer when reading
type and length. Allow read of last byte in buffer.
"count * 8 >= size" might overflow, "count >= size / 8" doesn't.
* coff-rs6000.c (_bfd_xcoff_slurp_armap): Don't overflow when
checking symbol count against section size. Guard against strlen
running off end of buffer by allocating one more byte and zeroing.
* coff64-rs6000.c (xcoff64_slurp_armap): Likewise.
This is fussing about nothing really but since I was looking at signed
vs. unsigned issues, I decided to use the correct types here.
* elf32-ppc.c (ppc_elf_get_synthetic_symtab): Use size_t for vars.
* elf64-ppc.c (sym_exists_at): Use size_t for lo, hi and mid.
PR 25237
* elf.c (assign_file_positions_for_load_sections): Attempt to
keep meaningless p_offset for PT_LOAD segments without file
contents within file size.
In Operand_soffsetx4_decode:
soffsetx4_0 = 0x4 + ((((int) offset_0 << 14) >> 14) << 2);
and other places.
Don't sign extend with shifts! This file also has many occurrences of
truncation via shifts, which aren't a problem due to using uint32, but
I dislike on principle enough to fix.
* xtensa-modules.c (Field_* functions): Don't mask using shifts.
(Operand_soffsetx4_decode, Operand_simm4_decode),
(Operand_simm8_decode, Operand_simm8x256_decode),
(Operand_simm12b_decode, Operand_label8_decode),
(Operand_label12_decode, Operand_soffset_decode),
(Operand_xt_wbr15_label_decode, Operand_xt_wbr18_label_decode): Don't
sign extend using shifts.
(Operand_immrx4_decode, Operand_uimm16x4_decode): Avoid UB in
constant.
Here, since val is signed:
*valuep = (val << scale);
* cpu-ia64-opc.c (ext_imms_scaled): Avoid undefined left shift
of negative values by using unsigned vars.
In cases where a relocatable object file has a common symbol, no other
file has a definition, and there is a matching common symbol found in
a shared library then ld will output a definition using the largest of
size and alignment for the commons. This patch fixes a bug in ld that
ignored common symbols when assigning versions, resulting in such
symbols being given VER_NDX_LOCAL versions.
PR 25236
* elflink.c (_bfd_elf_link_assign_sym_version): Assign versions
for ELF_COMMON_DEF_P symbols.
(elf_link_output_extsym, _bfd_elf_add_default_symbol): Adjust to
suit.
This bug was observed on nios2-linux-gnu with some C++ programs
linked with -pie or -shared. The nios2 ABI doesn't include appropriate
relocations in this instance and GCC is also being patched not to pass
--eh-frame-hdr to the linker in those cases.
2019-12-05 Sandra Loosemore <sandra@codesourcery.com>
bfd/
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Make
FDE encoding warning conditional.
This patch remedies the following DW_FORM_GNU_ref_alt related problem:
/* FIXME: Do we need to locate the correct CU, in a similar
fashion to the code in the DW_FORM_ref_addr case above ? */
Without the correct CU the wrong abbrevs are used, resulting in
errors and/or wrong file names.
There is scope for further work here. Parsing of CUs should be a two
step process, with the first stage just finding the bounds of the CU.
This would allow find_abstract_instance to quickly find the CU
referenced by DW_FORM_ref_addr or DW_FORM_GNU_ref_alt, then take the
second stage of CU parsing where abbrevs, ranges and suchlike consume
time and memory. As it is, we just process CUs from the start of
.debug_info until we find the one of interest. The testcase in the PR
takes 98G of virtual memory.
PR 25230
* dwarf2.c (struct dwarf2_debug_file): Add line_table and
abbrev_offsets.
(struct abbrev_offset_entry): New.
(hash_abbrev, eq_abbrev, del_abbrev): New functions.
(read_abbrevs): Check whether we have already read abbrevs at
given offset, and add new offset/abbrev to hash table.
(decode_line_info): Keep line table at offset zero in file struct.
Return this for a cu reusing the same dir/file list.
(find_abstract_instance): Find cu for DW_FORM_GNU_ref_alt.
(_bfd_dwarf2_slurp_debug_info): Create offset/abbrev hash tables.
(_bfd_dwarf2_cleanup_debug_info): Adjust deletion of lines and
abbrevs.
read_section does offset checking, reporting an error on out of
bounds. There's no need to duplicate the check in functions calling
read_section. Also, I spotted a place where a pointer difference
expression was being cast to unsigned int, possibly truncating
relevant bits on a 64-bit host.
* dwarf2.c (read_indirect_string): Don't duplicate offset check
done in read_section.
(read_indirect_line_string): Likewise.
(read_alt_indirect_string): Likewise.
(read_alt_indirect_ref): Likewise.
(read_abbrevs): Likewise. Free memory on all failure paths.
Use correct unsigned type for pointer difference comparison.
These are unused. Remove them. Also fix the wrong sort of 0 being
returned from read_alt_indirect_ref.
* dwarf2.c (struct dwarf2_debug): Update comments. Remove sec
and sec_info_ptr.
(_bfd_dwarf2_slurp_debug_info): Don't set sec or sec_info_ptr.
(stash_comp_unit): Likewise.
(read_alt_indirect_ref): Return NULL not FALSE.
There were a number of problems with the previous patch. Firstly,
_bfd_dwarf2_stash_syms didn't do anything when the original file had
dynamic symbols, and secondly, info found by the symbol search didn't
make it out of _bfd_elf_find_nearest_line except in the case of DWARF
functions without external linkage.
PR 23652
* dwarf2.c (_bfd_dwarf2_stash_syms): Break out of loop on finding
matching section.
(_bfd_dwarf2_find_nearest_line): Return an int, with value 2 when
returning info from the symbol table. Do the _bfd_elf_find_function
search also when !found. Call _bfd_dwarf2_stash_syms regardless of
symbols.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Accept dwarf2
result of 1 only.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise.
* libbfd-in.h (_bfd_dwarf2_find_nearest_line): Update prototype.
* libbfd.h: Regenerate.
Sometimes DWARF info for a function is incomplete, and the function
can be retrieved by examining symbols. However, when separate debug
files are used it may be that the original file is completely
stripped of symbols. This patch teaches BFD to look at symbols from
the debug file in that case.
The patch also removes arm_elf_find_function, instead implementing
elf_backend_maybe_function_sym. arm_elf_find_function was written
before the generic _bfd_elf_find_function called maybe_function_sym.
aarch64 copied arm, so that file gets the same treatment. There is
some chance this will speed up arm and aarch64 lookup of function/line.
PR 23652
* dwarf2.c (_bfd_dwarf2_stash_syms): New function.
(_bfd_dwarf2_find_nearest_line): Use it here, passing syms to
_bfd_elf_find_function. Call _bfd_elf_find_function in cases
where _bfd_elf_find_nearest_line would do so.
* elf.c (_bfd_elf_find_nearest_line): Omit _bfd_elf_find_function
for dwarf2.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Similarly. Tidy.
* elf32-arm.c (elf32_arm_maybe_function_sym): New function.
(elf_backend_maybe_function_sym): Define.
(arm_elf_find_function, elf32_arm_find_nearest_line): Delete.
(bfd_elf32_find_nearest_line): Don't define.
* elfnn-aarch64.c (elfNN_aarch64_maybe_function_sym): New function.
(elf_backend_maybe_function_sym): Define.
(aarch64_elf_find_function, elfNN_aarch64_find_nearest_line): Delete.
(bfd_elfNN_find_nearest_line): Don't define.
Using bfd_vma for insn is to avoid having to worry about sign
propagation in expressions involving insn and sym_value when bfd_vma
is not the same as unsigned long.
* elf32-sh.c (sh_reloc): Use a bfd_vma insn.
(sh_reloc <R_SH_IND12W>): Divide calculated relocation value
by two before applying to insn. Correct overflow test.
* coff-sh.c (sh_reloc): Likewise.
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
This code in elf_link_add_object_symbols:
ret = elf_add_dt_needed_tag (abfd, info, soname, add_needed);
if (ret < 0)
goto error_return;
/* If we have already included this dynamic object in the
link, just ignore it. There is no reason to include a
particular dynamic object more than once. */
if (ret > 0)
return TRUE;
prevents a shared library from being loaded twice by ensuring that any
library soname doesn't match the soname of one already loaded. This
happens before sym_hashes are allocated, which leaves sym_hashes NULL.
cmse_scan looks at library symbols, and when attempting to look up a
global symbol will segfault if sym_hashes is zero.
* elf32-arm.c (elf32_arm_size_stubs): Exclude dynamic library
BFDs that have not been loaded.
The testcase in this PR triggered "BFD_ASSERT (p2->is_sym)" by
sneakily generating a C_FILE sym whose value pointed into auxents.
The fix then is in the last changed line of this patch, to check
p->is_sym as well as p->u.syment.n_sclass. The other changes fix
various overflow checks that weren't as solid as they could be.
PR 25197
* coffgen.c (coff_find_nearest_line_with_names): Check that C_FILE
u.syment.n_value does point at another C_FILE sym and not into
some auxent that happens to look like a C_FILE. Properly check
for integer overflow and avoid possible pointer wrap-around.
Simplify pr17512 checks.
This patch renames elf_backend_modify_program_headers and moves the
elf.c code tweaking the ELF file header for -pie -Ttext-segment to a
new function, _bfd_elf_modify_headers, which then becomes the default
elf_backed_modify_headers and is called from any other target
elf_backed_modify_headers.
* elf-bfd.h (struct elf_backend_data <elf_backend_modify_headers>):
Rename from elf_backend_modify_program_headers.
(_bfd_elf_modify_headers): Declare.
* elf.c (assign_file_positions_except_relocs): Set
elf_program_header_size. Always call elf_backend_modify_headers.
Extract code modifying file header..
(_bfd_elf_modify_headers): ..to here. New function.
* elf32-arm.c (elf_backend_modify_headers): Renamed from
elf_backend_modify_program_headers.
* elf32-i386.c: Similarly.
* elf64-x86-64.c: Similarly.
* elfxx-target.h: Similarly. Default elf_backend_modify_headers
to _bfd_elf_modify_headers.
* elf-nacl.h (nacl_modify_headers): Rename from
nacl_modify_program_headers.
* elf-nacl.c (nacl_modify_headers): Rename from
nacl_modify_program_headers and call _bfd_elf_modify_headers.
* elf32-rx.c (elf32_rx_modify_headers): Similarly.
* elf32-spu.c (spu_elf_modify_headers): Similarly.
* elfnn-ia64.c (elfNN_ia64_modify_headers): Similarly.
* elf32-sh.c (elf_backend_modify_program_headers): Don't undef.
This patch introduces a new "sorry, cannot handle this file" bfd error
status. The idea is to use this error in cases where bfd hasn't found
a bfd_bad_value error, ie. an input file or set of options that are
invalid, but rather an input file that is simply too difficult to
process. Typically this might happen with fuzzed object files such as
the one in the PR, a wildly improbable core file. Some things are
just not worth wasting time over to fix "properly".
PR 25196
* bfd.c (bfd_error_type): Add bfd_error_sorry.
(bfd_errmsgs): Likewise.
* elf.c (rewrite_elf_program_header): Don't abort on confused
lma/alignment. Replace bfd_error_bad_value with bfd_error_sorry.
(_bfd_elf_validate_reloc): Use bfd_error_sorry.
(_bfd_elf_final_write_processing): Likewise.
* bfd-in2.h: Regenerate.
Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
* doc/chew.c (add_to_definition): Use correct type when
calculating size of array reallocation.
(nextword): Always initialise the word return parameter.
(compile): Check return value of nextword().
* elf-bfd.h (elf_backend_data) <elf_backend_core_find_build_id>:
New field.
(_bfd_elf32_core_find_build_id, _bfd_elf64_core_find_build_id):
New functions.
(elf_read_notes): Add declaration.
* elf.c (elf_read_notes): Move elf-bfd.h.
(_bfd_elf_core_find_build_id): New function.
(bfd_section_from_phdr): Scan core file PT_LOAD segments for
build-id if none is known.
(elf_parse_notes): For core files, scan for notes.
* elfcore.h (elf_core_file_matches_executable_p): If both
BFDs have identical build-ids, then they match.
(_bfd_elf_core_find_build_id): New function.
* elfxx-target.h (elf_backend_core_find_build_id): Define.
(elfNN_bed): Add elf_backend_core_find_build_id.
* libcoff-in.h (struct pe_tdata): Add dos_message field.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Copy the
dos_message field rather than initialising it.
(_bfd_XX_bfd_copy_private_bfd_data_common): Copy the dos_message
field.
* peicode.h (pe_mkobject): Initialise the dos_message field.
(pe_mkobject_hook): Copy the dos_message field.
(pe_bfd_object_p): Copy the dos_message field.
This rewrites much of assign_file_positions_for_non_load_sections to
allow objcopy and strip to handle cases like that in PR4499 where
program headers were not in their usual position immediately after the
ELF file header, and PT_LOAD headers were not sorted by paddr.
PR 4499
include/
* elf/internal.h (struct elf_segment_map): Delete header_size.
Add no_sort_lma and idx.
bfd/
* elf-nacl.c (nacl_modify_segment_map): Set no_sort_lma for all
PT_LOAD segments.
* elf32-spu.c (spu_elf_modify_segment_map): Likewise on overlay
PT_LOAD segments.
* elf.c (elf_sort_segments): New function.
(assign_file_positions_except_relocs): Use shortcuts to elfheader
and elf_tdata. Seek to e_phoff not sizeof_ehdr to write program
headers. Move PT_PHDR check..
(assign_file_positions_for_non_load_sections): ..and code setting
PT_PHDR p_vaddr and p_paddr, and code setting __ehdr_start value..
(assign_file_positions_for_load_sections): ..to here. Sort
PT_LOAD headers. Delete header_pad code. Use actual number of
headers rather than allocated in calculating size for program
headers. Don't assume program headers follow ELF file header.
Simplify pt_load_count code. Only set "off" for PT_LOAD or
PT_NOTE in cores.
(rewrite_elf_program_header): Set p_vaddr_offset for segments
that include file and program headers.
(copy_elf_program_header): Likewise, replacing header_size code.
This patch extends "ar P" to allow creation of normal (as distinct
from thin) archives with full path names.
PR 452
PR 25104
bfd/
* archive.c (normalize): Return file unchanged when
BFD_ARCHIVE_FULL_PATH.
(_bfd_construct_extended_name_table): Pass abfd, the output
bfd, to normalize.
(_bfd_archive_bsd44_construct_extended_name_table): Likewise.
* bfd.c (struct bfd): Make flags a full flagword.
(BFD_ARCHIVE_FULL_PATH): Define.
* bfd-in2.h: Regenerate.
binutils/
* ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH.
* doc/binutils.texi (extract from archive): Mention
restrictions when extracting from archives with full paths.
(ar P): Update to current P support.
(ar -X32_64): Fix spelling.
This change increases the default alignment for the .plt section
from 4 bytes to 8 bytes. When function descriptors are 8-byte
aligned, they can be updated atomically on 32-bit hppa. This
helps with ordering issues on SMP machines. It also ensures
that descriptors reside on the same cache line. This reduces
the probability of a double TLB miss in a call.
2019-10-20 John David Anglin <danglin@gcc.gnu.org>
* elf32-hppa.c (elf32_hppa_size_dynamic_sections): Provide 8-byte
minimum alignment for .plt section.