rawmemchr is a dependency of strchrnul, so it should be explicitly
listed.
gdb/ChangeLog:
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
For a forthcoming patch, I need a "skip_to_colon" function. I noticed
there are two skip_to_semicolon (one in gdb and one in gdbserver). I
thought we could put it in common/, and generalize it for any character.
It turns out that the strchrnul function does exactly that. I imported
the corresponding module from gnulib, for those systems that do not have
it.
There are probably more places where this function can be used instead
of doing the work by hand (I am looking at
remote-utils.c::look_up_one_symbol).
gdb/ChangeLog:
* remote.c (skip_to_semicolon): Remove.
(remote_parse_stop_reply): Use strchrnul instead of
skip_to_semicolon.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
strchrnul.
* gnulib/aclocal.m4: Regenerate.
* gnulib/config.in: Regenerate.
* gnulib/configure: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/import/m4/gnulib-comp.m4: Regenerate.
* gnulib/import/m4/rawmemchr.m4: New file.
* gnulib/import/m4/strchrnul.m4: New file.
* gnulib/import/rawmemchr.c: New file.
* gnulib/import/rawmemchr.valgrind: New file.
* gnulib/import/strchrnul.c: New file.
* gnulib/import/strchrnul.valgrind: New file.
gdb/gdbserver/ChangeLog:
* server.c (skip_to_semicolon): Remove.
(process_point_options): Use strchrnul instead of
skip_to_semicolon.
In vla.f90, this single line of source is compiled to many instructions,
vla2(:, :, :) = 1311 ! vla2-allocated
it is quite slow (about several minutes in my testing) to step over this
source line without range stepping. This patch is to increase the timeout
value by 15 times, which is a magic number to make sure timeout disappears
in my testing with a slow arm-linux board.
gdb/testsuite:
2016-01-28 Yao Qi <yao.qi@linaro.org>
* gdb.fortran/vla-value.exp: Wrap test with with_timeout_factor.
I see GDB crashes in dprintf.exp on aarch64-linux testing,
(gdb) PASS: gdb.base/dprintf.exp: agent: break 29
set dprintf-style agent^M
(gdb) PASS: gdb.base/dprintf.exp: agent: set dprintf style to agent
continue^M
Continuing.
ASAN:SIGSEGV
=================================================================
==22475==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x000000494820 sp 0x7fff389b83a0 bp 0x62d000082417 T0)
#0 0x49481f in remote_add_target_side_commands /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:9190^M
#1 0x49e576 in remote_add_target_side_commands /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:9174^M
#2 0x49e576 in remote_insert_breakpoint /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:9240^M
#3 0x5278b7 in insert_bp_location /home/yao/SourceCode/gnu/gdb/git/gdb/breakpoint.c:2734^M
#4 0x52ac09 in insert_breakpoint_locations /home/yao/SourceCode/gnu/gdb/git/gdb/breakpoint.c:3159^M
#5 0x52ac09 in update_global_location_list /home/yao/SourceCode/gnu/gdb/git/gdb/breakpoint.c:12686
the root cause of this problem in this case is about linespec and
symtab which produces additional incorrect location and a NULL is added to
bp_tgt->tcommands. I posted a patch
https://sourceware.org/ml/gdb-patches/2015-12/msg00321.html to fix it
in linespec (the fix causes regression), but GDB still shouldn't add
NULL into bp_tgt->tcommands. The logic of build_target_command_list
looks odd to me. If we get something wrong in parse_cmd_to_aexpr (it
returns NULL), we shouldn't continue, instead we should set flag
null_command_or_parse_error. This is what this patch does. In the
meantime, we find build_target_condition_list has the same problem, so
fix it too.
gdb:
2016-01-28 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (build_target_command_list): Don't call continue
if aexpr is NULL.
(build_target_condition_list): Likewise.
Nowadays, get_next_pcs in linux_target_ops has two parameters PC
and REGCACHE. Parameter PC looks redundant because it can be go
from REGCACHE. The patch is to remove PC from the arguments for
various functions.
gdb:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Remove argument pc. Get pc by regcache_read_pc. Callers updated.
(arm_deal_with_atomic_sequence_raw): Likewise.
(thumb_get_next_pcs_raw): Likewise.
(arm_get_next_pcs_raw): Likewise.
(arm_get_next_pcs): Remove argument pc. Callers updated.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Remove argument pc.
* linux-low.c (install_software_single_step_breakpoints): Don't
call regcache_read_pc.
* linux-low.h (struct linux_target_ops) <get_next_pcs>: Remove
argument pc.
In install_software_single_step_breakpoints, we've got the regcache
of current_thread, so we don't have to bother get_pc to get pc,
instead we can get pc from regcache directly. Note that the callers
of install_software_single_step_breakpoints have already switched
current_thread to LWP.
Since the pc is got from regcache_read_pc, in the next patch, we can
get pc inside the implementation of *the_low_target.get_next_pcs and
stop passing pc to *the_low_target.get_next_pcs.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (install_software_single_step_breakpoints): Call
regcache_read_pc instead of get_pc.
Nowadays, GDBserver disables async io (by ignoring SIGIO) when process
a serial event, and enables async io (by installing signal handler) when
resume the inferior and wait. GDBserver may miss SIGIO (by interrupt)
and doesn't process SIGIO in time, which is shown by
gdb.base/interrupt-noterm.exp. In the test, GDB sends "continue &" and
then "interrupt". if '\003' arrives at a period between GDBserver
receives vCont;c and enables async io, SIGIO is ignored because signal
handler isn't installed. GDBserver waits for the inferior and can not
notice '\003' until it returns from wait.
This patch changes the code to install SIGIO handler early, but block
and unblock SIGIO as needed. In this way, we don't remove SIGIO
handler, so SIGIO can't be ignored. However, GDBserver needs to
remove the signal handler when connection is closed.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (remote_close) [!USE_WIN32API]: Ignore SIGIO.
(unblock_async_io): Rename to ...
(block_unblock_async_io): ... it. New function.
(enable_async_io): Don't install SIGIO handler. Unblock it
instead.
(disable_async_io): Don't ignore SIGIO. Block it instead.
(initialize_async_io): Install SIGIO handler. Don't call
unblock_async_io.
GDBserver may read some packet together with '\003' in one go. We've
already checked '\003' first when reading packet by my patch,
Check input interrupt first when reading packet
https://sourceware.org/ml/gdb-patches/2016-01/msg00057.html
but if we don't check '\003' *after* each packet, the interrupt will
be processed next time GDBserver reads from the buffer, so that the
interrupt isn't processed in time. For example, GDB sends vCont;c and
interrupt (see gdb.base/interrupt-noterm.exp), we'll resume the
inferior and wait once packet vCont;c is seen. If we don't check the
interrupt character after vCont;c packet, interrupt character will stay
in the buffer unattended until GDBserver returns from the wait, which
may take a while. Note that since we've read '\003' from file
descriptor, SIGIO signal handler input_interrupt doesn't help either.
This issue can be exposed by hacking the end of getpkt like
@@ -1041,6 +1050,9 @@ getpkt (char *buf)
}
}
+ if (readchar_bufcnt > 0)
+ gdb_assert (*readchar_bufp != '\003');
+
return bp - buf;
}
and this can trigger internal error,
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
Remote connection closed^M
(gdb) FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT
Remote debugging from host 10.2.206.40^M
/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/remote-utils.c:1054: A problem internal to GDBserver has been detected.^M
getpkt: Assertion `*readchar_bufp != '\003'' failed.^M
This patch is to peek the buffer, if it is '\003', consume it and call
*the_target->request_interrupt.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If the buffer isn't empty, and the
first character is '\003', call *the_target->request_interrupt.
GCC6 will warn about misleading indentation issues like:
gdb/ada-lang.c: In function ‘ada_evaluate_subexp’:
ada-lang.c:11423:9: error: statement is indented as if it were guarded by...
arg1 = unwrap_value (arg1);
^~~~
gdb/ada-lang.c:11421:7: note: ...this ‘else’ clause, but it is not
else
^~~~
In this case it would be a bug except for the fact the if clause already
returned early. So this misindented statement really only got executed
for the else case. But it could easily mislead a reader, so adding a
proper else block is the correct solution.
In case of c-typeprint.c (c_type_print_base) the if statement is indeed
misleadingly indented, but not a bug. Just indent correctly. The inflow.c
(terminal_ours_1) misindented block comes from the removal of an if clause
in commit d9d2d8b which looks correct. Just introduce an else to fixup the
indentation of the block. The linux-record.c misleadingly indented return
statements are just that. Misleading to the reader, but not actual bugs.
Just unindent them so they don't look like they fall under the wrong if
clause.
They were added by
PATCH: Multithreaded debugging for gdbserver
https://sourceware.org/ml/gdb-patches/2002-06/msg00157.html
but as a no-op, and the last usage of them was removed by
[gdbserver/RFC/RFA] Implement multiprocess extensions, add linux multiproces support.
https://sourceware.org/ml/gdb-patches/2009-03/msg00667.html
This patch is to remove them.
gdb/gdbserver:
2016-01-25 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (new_thread_notify): Remove.
(dead_thread_notify): Likewise.
* remote-utils.h (new_thread_notify): Remove declaration.
(dead_thread_notify): Likewise.
If you have "set follow-fork child" set, then if you do "info threads"
right after a fork, and before the child reports any other event to
GDB core, you'll see:
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 31875) "fork-plus-threa" (running)
2.1 process 31879 "fork-plus-threa" Selected thread is running.
(gdb)
The "Selected thread is running." bit is a bogus error. That was GDB
trying to fetch the current frame of thread 2.1, because the external
runnning state is "stopped", and then throwing an error because the
thread is actually running.
This actually affects all-stop + schedule-multiple as well.
The problem here is that on a fork event, GDB doesn't update the
external parent/child running states.
New comprehensive test included. The "kill inferior 1" / "kill
inferior 2" bits also trip on PR gdb/19494 (hang killing unfollowed
fork children), which was fixed by the previous patch.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* infrun.c (handle_inferior_event_1) <fork/vfork>: Update
parent/child running states.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* gdb.base/fork-running-state.c: New file.
* gdb.base/fork-running-state.exp: New file.
linux_nat_kill relies on get_last_target_status to determine whether
the current inferior is stopped at a unfollowed fork/vfork event.
This is bad because many things can happen ever since we caught the
fork/vfork event... This commit rewrites that code to instead walk
the thread list looking for unfollowed fork events, similarly to what
was done for remote.c.
New test included. The main idea of the test is make sure that when
the program stops for a fork catchpoint, and the user kills the
parent, gdb also kills the unfollowed fork child. Since the child
hasn't been added as an inferior at that point, we need some other
portable way to detect that the child is gone. The test uses a pipe
for that. The program forks twice, so you have grandparent, child and
grandchild. The grandchild inherits the write side of the pipe. The
grandparent hangs reading from the pipe, since nothing ever writes to
it. If, when GDB kills the child, it also kills the grandchild, then
the grandparent's pipe read returns 0/EOF and the test passes.
Otherwise, if GDB doesn't kill the grandchild, then the pipe read
never returns and the test times out, like:
FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: kill parent (timeout)
FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: kill parent (timeout)
No regressions on x86_64 Fedora 20. New test passes with gdbserver as
well.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* linux-nat.c (kill_one_lwp): New, factored out from ...
(kill_callback): ... this.
(kill_wait_callback): New, factored out from ...
(kill_wait_one_lwp): ... this.
(kill_unfollowed_fork_children): New function.
(linux_nat_kill): Use it.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* gdb.base/catch-fork-kill.c: New file.
* gdb.base/catch-fork-kill.exp: New file.
These two tests collect 64 words from $sp onwards, hoping that's enough
to capture a few whole stack frames. Unfortunately, that's not enough
for s390, which tends to have large frame sizes - minimum 24 words on
s390, 20 on s390x (which just barely passes). Bump it to 128 words,
let's hope no machine needs more.
Tested on x86_64, s390, s390x.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Bump stack collection fudge factor.
* gdb.trace/entry-values.exp: Bump stack collection fudge factor.
The test constructs fake DWARF info for a C structure involving bitfields.
DWARF bitfields are always counted from LSB, while the order in which
bitfields are allocated in a C struct depends on the target endianness -
thus the generated DWARF marks different bitfields as unavailable when
target is big endian. Accordingly, we need different expected outputs.
Tested on s390 and s390x, no regression on x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/unavailable-dwarf-piece.exp: Fix bitfield handling on big
endian targets.
Missed one message in bd0a71fa16, since it
didn't trigger on s390x or amd64 (fast tracepoint out of range due to
shared library usage), noticed on s390.
Pushed as obvious.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Fix expected message on continue.
Pedro Alves:
Looks like you forgot to amend before pushing though -- the version
checked in still had "Thread 1".
gdb/testsuite/ChangeLog
2016-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
Fix testsuite compatibility with Guile.
* gdb.gdb/selftest.exp (send ^C to child process): Drop expected Thread
number.
The PR threads/19422 patchset added a new regression.
Additionally below it there was already a regression if --with-guile (which is
default if Guile is found) was used.
racy case #1:
(xgdb) PASS: gdb.gdb/selftest.exp: Set xgdb_prompt
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff583bfdd in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process
signal SIGINT^M
Continuing with signal SIGINT.^M
^C^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff5779da0 in sigprocmask () from /lib64/libc.so.6^M
(gdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
backtrace^M
errstring=errstring@entry=0x7e0e6c "", mask=mask@entry=RETURN_MASK_ALL) at exceptions.c:240^M
errstring=errstring@entry=0x7e0e6c "", mask=mask@entry=RETURN_MASK_ALL) at exceptions.c:240^M
(gdb) PASS: gdb.gdb/selftest.exp: backtrace through signal handler
racy case #2:
(xgdb) PASS: gdb.gdb/selftest.exp: Set xgdb_prompt
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff583bfdd in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process
signal SIGINT^M
Continuing with signal SIGINT.^M
^C^M
Thread 2 "xgdb" received signal SIGINT, Interrupt.^M
[Switching to Thread 0x7ffff3b7f700 (LWP 13227)]^M
0x00007ffff6b88b10 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0^M
(gdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
backtrace^M
(gdb) FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
Pedro Alves:
Not all targets support thread names, and even those that do, not all
use the program name as default thread name -- I think that's only true
for GNU/Linux, actually. So I think it's best to not expect that, like:
-re "(Thread .*|Program) received signal SIGINT.*$gdb_prompt $" {
gdb/testsuite/ChangeLog
2016-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix testsuite compatibility with Guile.
* gdb.gdb/selftest.exp (send ^C to child process): Accept also Thread.
(thread 1): New test for backtrace through signal handler.
The prior format led to confusing messages when threads were created
or added such as "[New process 14757, LWP 100537]". The new format
reports this as "[New LWP 100434 of process 15652]".
gdb/ChangeLog:
* fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
Noticed and tested on 31-bit s390. This bug caused completely broken
fast tracepoints.
gdb/gdbserver/ChangeLog:
* tracepoint.c (write_inferior_data_ptr): Cast to uintptr_t, so that
it works properly on big-endian machines where sizeof (CORE_ADDR)
!= sizeof (void *).
This patch unbuffer the output of the program so that the test harness
can count the number of "done" from output correctly.
gdb/testsuite:
2016-01-22 Yao Qi <yao.qi@linaro.org>
PR testsuite/19491
* gdb.base/multi-forks.c: Include
../lib/unbuffer_output.c
(main): Call gdb_unbuffer_output.
I see the following test fail on native arm-linux gdb testing...
(gdb) PASS: gdb.base/killed-outside.exp: registers: get pid of inferior
Executing on target: kill -9 2346 (timeout = 300)
spawn kill -9 2346^M
flushregs^M
Register cache flushed.^M
warning: Unable to fetch general registers.^M
PC not available^M
(gdb) PASS: gdb.base/killed-outside.exp: registers: flushregs
info threads^M
Id Target Id Frame ^M
* 1 process 2346 "killed-outside" (gdb) FAIL: gdb.base/killed-outside.exp: registers: info threads (timeout)
since the inferior disappeared, ptrace will fail. In that case, the
exception should be thrown, so that the caller can handle that.
gdb:
2016-01-22 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (fetch_fpregs): Call perror_with_name
instead of warning.
(store_fpregs, fetch_regs, store_regs): Likewise.
(fetch_wmmx_regs, store_wmmx_regs): Likewise.
(fetch_vfp_regs, store_vfp_regs): Likewise.
String collection always used ref32 to fetch the string pointer. Make it
use gen_fetch instead.
As a side effect, this patch changes dup+const+trace+pop sequence used
for collecting the string's address to a trace_quick opcode. This
results in a shorter agent expression.
This appeared to work on x86_64 since it's a little-endian platform, and
malloc (used in gdb.trace/collection.exp) returns addresses in low 4GB.
Noticed and tested on s390x-ibm-linux-gnu, also tested on
i686-unknown-linux-gnu and x86_64-unknown-linux-gnu.
gdb/ChangeLog:
* ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
Give the function a better name (drop "maybe_") and update the header
comment.
gdb/ChangeLog:
* disasm.c (maybe_add_dis_line_entry): Rename to...
(add_dis_line_entry): ...this, and update header comment.
(do_mixed_source_and_assembly): Now use add_dis_line_entry.
Currently, even when built with --enable-build-with-cxx, gdb uses
CFLAGS instead of CXXFLAGS. This commit fixes it.
CXXFLAGS set in the environment when configure was run is now honored
in the generated gdb/Makefile, and you can also override CXXFLAGS in
the command like at make time, with the usual 'make CXXFLAGS="..."'
Objects built with a C compiler (e.g., gnulib) still honor CFLAGS
instead.
gdb/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS, CXXFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use COMPILER_CFLAGS instead of CFLAGS.
* configure: Regenerate.
A relatively recent patch support for explicit locations, and part
of that patch cleaned up the way we parse breakpoint locations.
Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint
locations. In particular, on PIE programs, one can see the issue by
doing the following, with any program:
(gdb) b *main
Breakpoint 1 at 0x51a: file hello.c, line 3.
(gdb) run
Starting program: /[...]/hello
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Just for the record, this regression was introduced by:
commit a06efdd6ef
Date: Tue Aug 11 17:09:35 2015 -0700
Subject: Explicit locations: introduce address locations
What happens is that the patch makes the implicit assumption that
the address computed the first time is static, as if it was designed
to only support litteral expressions (Eg. "*0x1234"). This allows
the shortcut of not re-computing the breakpoint location's address
when re-setting breakpoints.
However, this does not work in general, as demonstrated in the example
above.
This patch plugs that hole simply by saving the original expression
used to compute the address as part of the address location, so as
to then re-evaluate that expression during breakpoint re-set.
gdb/ChangeLog:
* location.h (new_address_location): Add new parameters
"addr_string" and "addr_string_len".
(get_address_string_location): Add declaration.
* location.c (new_address_location): Add new parameters
"addr_string" and "addr_string_len". If not NULL, store
a copy of the addr_string in the new location as well.
(get_address_string_location): New function.
(string_to_event_location): Update call to new_address_location.
* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
Save the event location in the parser's state before
passing it to convert_address_location_to_sals.
* breakpoint.c (create_thread_event_breakpoint): Update call
to new_address_location.
(init_breakpoint_sal): Get the event location's string, if any,
and use it to update call to new_address_location.
* python/py-finishbreakpoint.c (bpfinishpy_init):
Update call to new_address_location.
* spu-tdep.c (spu_catch_start): Likewise.
* config/djgpp/fnchange.lst: Add entries for
gdb/testsuite/gdb.base/break-fun-addr1.c and
gdb/testsuite/gdb.base/break-fun-addr2.c.
gdb/testsuite/ChangeLog:
* gdb.base/break-fun-addr.exp: New file.
* gdb.base/break-fun-addr1.c: New file.
* gdb.base/break-fun-addr2.c: New file.
This patch fixes the following regression introduced by commit d0e59a68
step^M
39 } /* handler */^M
1: x/i $pc^M
=> 0x8740 <handler+80>: sub sp, r11, #0^M
(gdb) step^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
setitimer () at ../sysdeps/unix/syscall-template.S:81^M
81 ../sysdeps/unix/syscall-template.S: No such file or directory.^M
1: x/i $pc^M
=> 0xb6eff9c0 <setitimer>: push {r7}^M
(gdb) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
in my test setting, program is compiled in arm mode, but the glibc
is built in thumb mode, so when we do 'step' to step over syscall
instruction svc for SIGRETURN, GDB should set breakpoint for arm mode
in the program, even though the current program in glibc is in thumb
mode. Current GDB doesn't consider the case that the mode of program
SIGRETURN goes to can be different from current program mode.
In fact, GDB has taken care of this arm/thumb mode changes already,
see
/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
return 1. In addition, set IS_THUMB depending on whether we
will return to ARM or Thumb code. Return 0 if it is not a
rt_sigreturn/sigreturn syscall. */
static int
arm_linux_sigreturn_return_addr (struct frame_info *frame,
unsigned long svc_number,
CORE_ADDR *pc, int *is_thumb)
but in the commit d0e59a68
> - arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
> + if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
> + next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
the IS_THUMB setting is lost, so it is a regression.
gdb:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
gdb/gdbserver:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_sigreturn_next_pc.
The lambda function used to sort the enumerator list does not work
properly. This list consists of tuples, (enum label, enum value). The
key function returns x.enumval. enumval not being defined for a tuple,
we see this exception in the test log:
Python Exception <class 'AttributeError'> 'tuple' object has no attribute 'enumval'
The function should return the second item of the tuple, which is the
enumval.
The pretty-printer still worked mostly correctly, except that the
enumeration values were not sorted. The test still passed because the
enumeration values are already sorted where they are defined. The test
also passed despite the exception being printed, because the right output
was printed after the exception:
print (enum flag_enum) (FLAG_1)
Python Exception <type 'exceptions.AttributeError'> 'tuple' objecthas no attribute 'enumval':M
$7 = 0x1 [FLAG_1]
(gdb) PASS: gdb.python/py-pp-maint.exp: print FLAG_1
New in v2:
- Improved test case, I stole Pedro's example directly. It verifies
that the sorting of enumerators by value works, by checking that
printing FOO_MASK appears as FOO_1 | FOO_2 | FOO_3.
I noticed that I could change the regexps to almost anything and the
tests would still pass. I think it was because of the | in there. I
made them more robust by using string_to_regexp. I used curly braces
{ } instead of quoting marks " " for strings, so that I could use
square brackets [ ] in them without having to escape them all. I also
removed the "message" part of the tests, since they are redundant with
the command, and it's just more maintenance to have to update them.
Tested with Python 2.7 and 3.5.
gdb/ChangeLog:
* python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
Fix enumerators sort key function.
gdb/testsuite/ChangeLog:
* gdb.python/py-pp-maint.exp: Change/add enum flag tests.
* gdb.python/py-pp-maint.c (enum flag_enum): Use more complex
enum flag values.
The gnu_vector test case yields a new FAIL on s390x:
FAIL: gdb.base/gnu_vector.exp: verify vector return value
It was introduced by commit 77ae9c1933 "gdb.base/gnu_vector.exp:
Don't test output from the inferior". That commit dropped the special
handling for GDB's inability (on some targets) to set the return value.
This change re-establishes the logic from before, converting the above
FAIL to a KFAIL (PRMS gdb/8549).
gdb/testsuite/ChangeLog:
* gdb.base/gnu_vector.exp: Re-establish handling for should_kfail
when GDB can not set the vector return value. Add more comments
for clarification.
On Ubuntu 14.04 the following failure would be seen when running the
tspeed.exp test on a target that supports fast tracepoints like x86_64:
Target returns error code '.In-process agent library not loaded in
process. Fast and static tracepoints unavailable.'.
(gdb) FAIL: gdb.trace/tspeed.exp: start trace experiment
This is because the default is to link with --as-needed and the
gdb_compile for the test is using the libs argument instead of shlib which
corrects this issue since 6ebea266fd by
adding -Wl,--no-as-needed.
This patch fixes the issue by passing the lib as the shlib argument to
gdb_compile.
Tested on Ubuntu 14.04 x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/tspeed.exp: Use shlib instead of libs in gdb_compile
command.
(GNU Coding Standard...)
gdb/ChangeLog:
* printcmd.c (print_scalar_formatted): move binary operator from
end of line to beginning of next line. Adjust formatting
accordingly.
gdb/ChangeLog:
* fbsd-tdep.c (find_stop_signal): Remove.
(struct fbsd_collect_regset_section_cb) <lwp>: New field.
<stop_signal>: New field.
<abort_iteration>: New field.
(fbsd_collect_regset_section_cb): Use new fields.
(fbsd_collect_thread_registers): New function.
(struct fbsd_corefile_thread_data): New structure.
(fbsd_corefile_thread): New function.
(fbsd_make_corefile_notes): Use new function to dump notes for each
non-exited thread in a process.
Older versions of FreeBSD supported userland threading via a pure
user-space threading library (N threads scheduled on 1 process) and
a N:M model (N threads scheduled on M LWPs). However, modern FreeBSD
versions only support a M:M threading model where each user thread is
backed by a dedicated LWP. This thread target only supports this
threading model. It also uses ptrace to query and alter LWP state
directly rather than using libthread_db to simplify the implementation.
FreeBSD recently gained support for reporting LWP events (birth and death
of LWPs). GDB will use LWP events when present. For older systems it
fetches the list of LWPs in the to_update_thread_list target op to update
the list of threads on each stop.
This target supports scheduler locking by using ptrace to suspend
individual LWPs as necessary before resuming a process.
gdb/ChangeLog:
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
This allows gdb to fetch per-thread registers for multi-threaded FreeBSD
processes.
Export get_ptrace_pid() from inf-ptrace.c and use it to determine the PID
to pass to ptrace in pan-BSD native targets. NetBSD and OpenBSD also accept
LWP IDs for ptrace requests to fetch per-thread state.
gdb/ChangeLog:
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
get_ptrace_pid.
(amd64bsd_store_inferior_registers): Use get_ptrace_pid.
(amd64bsd_dr_get): Use get_ptrace_pid.
(amd64bsd_dr_set): Use get_ptrace_pid.
* i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
(i386bsd_store_inferior_registers): Use get_ptrace_pid.
(i386bsd_dr_get): Use get_ptrace_pid.
(i386bsd_dr_set): Use get_ptrace_pid.
* inf-ptrace.c (get_ptrace_pid): Export.
* inf-ptrace.h (get_ptrace_pid): Declare.
* ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
(ppcfbsd_store_inferior_registers): Use lwp id.
Display the LWP ID of each thread in a FreeBSD core. Extract thread
names from the per-thread THRMISC note.
gdb/ChangeLog:
* fbsd_tdep.c (fbsd_core_pid_to_str): New function.
(fbsd_core_thread_name): New function.
(fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
Add "core_thread_name" gdbarch method.
Add a new gdbarch method to extract a thread name from a core for a
given thread. Use this new method in core_thread_name to implement the
to_thread_name target op.
gdb/ChangeLog:
* corelow.c (core_thread_name): New function.
(init_core_ops): Use "core_thread_name" for the "to_thread_name"
target op.
* gdbarch.sh (core_thread_name): New gdbarch callback.
* gdbarch.h: Re-generate.
* gdbarch.c: Re-generate.
Using Python 3.5 (I assume it's the same with 3.4 and lower, but I didn't
test), I see this:
print (enum flag_enum) (FLAG_1)^M
Python Exception <class 'TypeError'> %x format: an integer is required, not gdb.Value: ^M
$7 = ^M
(gdb) FAIL: gdb.python/py-pp-maint.exp: print FLAG_1
Apparently, this idiom, where v is a gdb.Value, was possible with Python 2,
but not with Python 3:
'%x' % v
In Python 2, it would automatically get converted to an integer. To solve
it, I simply added wrapped v in a call to int().
'%x' % int(v)
In Python 2, the int type is implemented with a "long" in C, so on x86-32 it's
32-bits. I was worried that doing int(v) would truncate the value and give
wrong results for enum values > 32-bits. However, the int type != the int
function. The int function does the right thing, selecting the right integer
type for the given value. I tested with large enum values on x86-32 and
Python 2, and everything works as expected.
gdb/ChangeLog:
* python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
convert gdb.Value to integer type using int().
By default, if a test driver (a test .exp) ends with an uncaught
error/exception, the runtest command will still have a return code of 0
(success). However, if a test (or the environment) is broken and does
not work properly, it should be considered as failed so that we can
notice it and fix it.
Passing the --status flag to runtest will make it return an error if one
of the test it runs ends up with an uncaught error.
gdb/testsuite/ChangeLog:
* Makefile.in (check-single): Pass --status to runtest.
(check/%.exp): Likewise.
When using the check-parallel target, the return code of make is always 0,
regardless of test results. This patch makes it return the same code as
the "make do-check-parallel" sub-command. So if there is a FAIL somewhere,
non-zero will be returned by make.
For the sake of example, I introduced a failure in gdb.base/break.exp.
$ make check-single TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Fail :(
I think the parallel run should do the same. Currently:
$ make check-parallel TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Success :D
And with the patch (no big surprises there):
$ make check-parallel TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Fail :(
What do you think?
gdb/testsuite/ChangeLog:
* Makefile.in (check-parallel): Propagate return code from make
do-check-parallel.
Include <sys/types.h> as a prerequisite for <machine/reg.h> when checking
for the r_fs and r_gs members in struct reg. Note that the previous test
for <machine/reg.h> already includes <sys/types.h> as a prerequisite.
gdb/ChangeLog:
* configure.ac: Include <sys/types.h when checking for "r_fs" in
"struct reg".
* configure: Regenerate.
Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
This is fallout from f303dbd60d.
The testcases themselves are single-threaded, but they load the IPA library,
which injects a thread in the inferior - making them multithreaded.
This results in printing the thread numbers in breakpoint messages.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Fix expected message on continue.
* gdb.trace/pending.exp: Fix expected message on continue.
* gdb.trace/trace-break.exp: Fix expected message on continue.
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
Fix a bug in `micromips_insn_at_pc_has_delay_slot' in instruction size
determination via `mips_insn_size'. In the microMIPS case the latter
function expects a lone 16-bit instruction word containing the major
opcode regardless of whether the opcode requires another 16-bit word to
follow, to form a complete 32-bit instruction. Code however passes the
16-bit word previously retrieved shifted left by 16 bits. Consequently
`mips_insn_size', which examines the low 16-bit only, always sees 0.
By pure coincidence a major opcode of 0 denotes a 32-bit instruction in
the microMIPS instruction set, so the size of 4 is always returned here,
and the following 16-bit word is then merged in the low 16 bits of the
instruction previously shifted by 16 bits. The resulting 32-bit value
is then passed to `micromips_instruction_has_delay_slot' for delay slot
presence determination. This function in turn first examines the high
16 bits of the instruction word received and ignores the low 16 bits for
16-bit instructions.
Consequently the only effect of this bug is an extraneous memory read
issued to retrieve a subsequent 16-bit word where a 16-bit instruction
is being examined. Which in turn may fail if the instruction is located
right at the end of a readable memory area, in which case the lack of a
delay slot will be reported to the caller, which may be incorrect.
This code is used in breakpoint maintenance, for delay slot avoidance,
so the bug would only trigger for the unlikely case of someone placing
a breakpoint in a delay slot of an instruction which is at the end of
readable memory. Which explains why the bug remained unnoticed so long.
gdb/
* mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
Those are unused since gdb_test_multiple was added, factoring out most
of the content of gdb_test.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_test): Remove unused global references.
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
This patch is the follow-up of
https://sourceware.org/ml/gdb-patches/2016-01/msg00164.html to provide
linux_{get,set}_pc_64bit functions.
Rebuild GDBserver with tilegx-linux-gcc. Not tested.
I think about pc in Tile-GX a little bit. Looks current Tile-GX
supports debugging 32-bit program (multi-arch), but PC is always
64-bit. See this thread
https://sourceware.org/ml/gdb-patches/2013-02/msg00113.html
and GDBserver reads PC as 64-bit through ptrace. However, if
the inferior is 32-bit, the PC in the target description and
regcache is 32-bit, so only 32-bit contents are sent back GDB.
Anyway, Tile-GX GDBserver may have some problems here, but this
patch doesn't change anything.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_set_pc_64bit): New function.
(linux_get_pc_64bit): New function.
* linux-low.h (linux_set_pc_64bit, linux_get_pc_64bit):
Declare.
* linux-sparc-low.c (debug_threads): Remove declaration.
(sparc_get_pc): Remove.
(the_low_target): Use linux_get_pc_64bit instead of
sparc_get_pc.
* linux-tile-low.c (tile_get_pc, tile_set_pc): Remove.
(the_low_target): Use linux_get_pc_64bit and
linux_set_pc_64bit.
This patch adds a pair of new functions linux_get_pc_32bit and
linux_set_pc_32bit which get and set 32-bit register "pc" from
regcache. This function can be used some targets and these own
$ARCH_{get,set}_pc are replaced by linux_{get,set}_pc_32bit
respectively.
This patch touches many targets, but I only have arm board to
test and no regression. I also rebuilt nios2-linux GDBserver.
If it is right to go, I'll post the 64-bit counterpart later.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (debug_threads): Remove declaration.
(arm_get_pc, arm_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-bfin-low.c (bfin_get_pc, bfin_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-cris-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc,): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-crisv32-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-low.c: Include inttypes.h.
(linux_get_pc_32bit, linux_set_pc_32bit): New functions.
* linux-low.h (linux_get_pc_32bit, linux_set_pc_32bit): Declare.
* linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-m68k-low.c (m68k_get_pc, m68k_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-nios2-low.c (nios2_get_pc, nios2_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-sh-low.c (sh_get_pc, sh_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-xtensa-low.c (xtensa_get_pc, xtensa_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
The ARM assembler has "@" as a comment character, so there are compile
errors in {py,scm}-section-script.c,
gdb compile failed, /tmp/ccHEzYqy.s: Assembler messages:
/tmp/ccHEzYqy.s:19: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:24: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:29: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:41: Error: junk at end of line, first unrecognized character is `,'
This patch replaces @progbits with %progbits.
gdb/testsuite:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* gdb.guile/scm-section-script.c: Replace @progbits with
%progbits.
* gdb.python/py-section-script.c: Likewise.
This commit fixes nat/linux-namespaces.c to build correctly on
targets without fork.
gdb/ChangeLog:
* nat/linux-namespaces.c (do_fork): New function.
(linux_mntns_get_helper): Use the above.
gdb/gdbserver/ChangeLog:
* configure.ac (AC_FUNC_FORK): New check.
* config.in: Regenerate.
* configure: Likewise.
This patch fixes a SIGSEGV when trying to open a Fortran program
compiled with ifort (reproduced using version using version 16.0.1.150).
The error can be reproduce with most, if not any program. For instance,
a single file only containing "end", compiled with no additional flag,
suffices.
gdb/ChangeLog:
PR gdb/19208
* dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
if the function has no name.
2016-01-15 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
Conditionalize for Windows host.
(GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
(phony_iconv_open): Handle both UTF-32 endiannesses.
(phony_iconv): Likewise. Check for output overflow and clean up
out-of-input cases. Correct adjustment to input buffer pointer.
(set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
phony_iconv_open.
Add support for specifying "all threads of inferior N", by writing "*"
as thread number/range in thread ID lists.
E.g., "info threads 2.*" or "thread apply 2.* bt".
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* NEWS: Mention star wildcard ranges.
* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
(number_range_setup_range): New function.
* cli/cli-utils.h (number_range_setup_range): New declaration.
* thread.c (thread_apply_command): Support star TID ranges.
* tid-parse.c (tid_range_parser_finished)
(tid_range_parser_string, tid_range_parser_skip)
(get_tid_or_range, get_tid_or_range): Handle
TID_RANGE_STATE_STAR_RANGE.
(tid_range_parser_star_range): New function.
* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
New value.
(tid_range_parser_star_range): New declaration.
gdb/doc/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads) <thread ID lists>: Document star ranges.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test star wildcard ranges.
This fixes a few bugs in "thread apply".
While this works:
(gdb) thread apply 1 p 1234
Thread 1 (Thread 0x7ffff7fc1740 (LWP 14048)):
$1 = 1234
This doesn't:
(gdb) thread apply $thr p 1234
Thread 1 (Thread 0x7ffff7fc1740 (LWP 12039)):
Invalid thread ID: p 1234
(gdb)
~~~~
Also, while this works:
(gdb) thread apply 1
Please specify a command following the thread ID list
This doesn't:
(gdb) thread apply $thr
Thread 1 (Thread 0x7ffff7fc1740 (LWP 12039)):
[Current thread is 1 (Thread 0x7ffff7fc1740 (LWP 12039))]
(gdb)
~~~~
And, while this works:
(gdb) thread apply
Please specify a thread ID list
This obviously bogus invocation is just silent:
(gdb) thread apply bt
(gdb)
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* thread.c (thread_apply_command): Use the tid range parser to
advance past the thread ID list.
* tid-parse.c (get_positive_number_trailer): New function.
(parse_thread_id): Use it.
(get_tid_or_range): Use it. Return 0 instead of throwing invalid
thread ID error.
(get_tid_or_range): Detect negative values. Return 0 instead of
throwing invalid thread ID error.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp (thr_apply_info_thr_error): Remove "p 1234"
command from "thread apply" invocation.
(thr_apply_info_thr_invalid): Default the expected output to the
input tid list.
(top level): Add tests that use convenience variables. Add tests
for "thread apply" with a valid TID list, but missing the command.
Field syscall_next_pc in struct gdbarch_tdep was to calculate the
next pc of syscall instruction. On linux target, syscall_next_pc
is set to arm_linux_syscall_next_pc, to do linux specific things.
However, after we have struct arm_get_next_pcs_ops, we can do the
same thing in struct arm_get_next_pcs_ops field syscall_next_pc,
so syscall_next_pc in struct gdbarch_tdep is not needed any more.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Declare.
(arm_linux_get_next_pcs_ops): Install
arm_linux_get_next_pcs_syscall_next_pc.
(arm_linux_syscall_next_pc): Change to ...
(arm_linux_get_next_pcs_syscall_next_pc): ... it.
(arm_linux_init_abi): Don't set tdep->syscall_next_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
(arm_get_next_pcs_syscall_next_pc): Make it static. Don't
call tdep->syscall_next_pc.
* arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
(arm_get_next_pcs_syscall_next_pc): Remove.
Two recent patches breaks GDB C++ mode build,
https://sourceware.org/ml/gdb-patches/2016-01/msg00150.htmlhttps://sourceware.org/ml/gdb-patches/2016-01/msg00086.html
gdb/remote.c: In function 'int remote_set_syscall_catchpoint(target_ops*, int, int, int, int, int*)':
gdb/remote.c:2036:39: error: invalid conversion from 'void*' to 'char*' [-fpermissive]
catch_packet = xmalloc (maxpktsz);
^
gdb/thread.c: In function 'int do_captured_thread_select(ui_out*, void*)':
gdb/git/gdb/thread.c:1999:24: error: invalid conversion from 'void*' to 'const char*' [-fpermissive]
const char *tidstr = tidstr_v;
^
this patch fixes them by casting void * to the right type.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* remote.c (remote_set_syscall_catchpoint): Cast to char *.
* thread.c (do_captured_thread_select): Cast to const char *.
This patch makes thumb2_breakpoint static. When writing this patch,
I find the only reason we keep thumb2_breakpoint extern is that it
is used as an argument passed to arm_gdbserver_get_next_pcs. However,
field arm_thumb2_breakpoint is only used in a null check in
thumb_get_next_pcs_raw, so I wonder why do need to pass thumb2_breakpoint
to arm_gdbserver_get_next_pcs.
thumb2_breakpoint was added by Daniel Jacobowitz in order to support
single-step IT block
https://sourceware.org/ml/gdb-patches/2010-01/msg00624.html the logic
there was if we have 32-bit thumb-2 breakpoint defined, we can safely
single-step IT block, otherwise, we can't. Daniel didn't want to use
16-bit thumb BKPT instruction, because it triggers even on instruction
which should be executed. Secondly, using 16-bit thumb illegal
instruction on top of 32-bit thumb instruction may break the meaning of
original IT blocks, because the other 16-bit can be regarded as an
instruction. See more explanations from Daniel's kernel patch
http://www.spinics.net/lists/arm-kernel/msg80476.html
Let us back to this patch, GDB/GDBserver can safely single step
IT block if thumb2_breakpoint is defined, but the single step logic
doesn't have to know the thumb-2 breakpoint instruction. Only
breakpoint insertion mechanism decides to use which breakpoint
instruction. In the software single step code, instead of pass
thumb2_breakpoint, we can pass a boolean variable
has_thumb2_breakpoint indicate whether the target has thumb-2
breakpoint defined, which is equivalent to the original code.
Regression tested on arm-linux. No regression.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
instead.
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
<arm_thumb2_breakpoint>: Remove.
<has_thumb2_breakpoint>: New field.
(arm_get_next_pcs_ctor): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass
1 to arm_get_next_pcs_ctor.
* arm-tdep.c (arm_software_single_step): Pass 0 to
arm_get_next_pcs_ctor.
gdb/gdbserver:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (thumb2_breakpoint): Make it static.
* linux-aarch32-low.h (thumb2_breakpoint): Remove declaration.
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Pass 1 to
arm_get_next_pcs_ctor.
When reading instruction, we should use byte_order_for_code instead
of byte_order.
gdb:
2016-01-13 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
byte_order_for_code to read instruction.
This commit adds a new $_gthread convenience variable, that is like
$_thread, but holds the current thread's global thread id.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_gthread.
* gdbthread.h (struct thread_info) <global_num>: Mention
$_gthread.
* thread.c (thread_num_make_value_helper): New function.
(thread_id_make_value): Delete.
(thread_id_per_inf_num_make_value, global_thread_id_make_value):
New.
(thread_funcs): Adjust.
(gthread_funcs): New.
(_initialize_thread): Register $_gthread variable.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Expect $_gthread as well.
* gdb.multi/tids.exp: Test $_gthread.
* gdb.threads/thread-specific.exp: Test $_gthread.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document the $_gthread convenience
variable.
(Convenience Vars): Likewise.
This commit adds a new Python InferiorThread.global_num attribute.
This can be used to pass the correct thread ID to Breakpoint.thread,
which takes a global thread ID, not a per-inferior thread number.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.global_num.
* python/py-infthread.c (thpy_get_global_num): New function.
(thread_object_getset): Register "global_num".
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test InferiorThread.global_num and
Breakpoint.thread.
* gdb.python/py-infthread.exp: Test InferiorThread.global_num.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* python.texi (Breakpoints In Python) <Breakpoint.thread>: Add
anchor.
(Threads In Python): Document new InferiorThread.global_num
attribute.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
Add a new function to print a thread ID, in the style of paddress,
plongest, etc. and adjust all CLI-reachable paths to use it.
This gives us a single place to tweak to print inferior-qualified
thread IDs later:
- [Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 8155))]
+ [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
etc., though for now, this has no user-visible change.
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_threaded_breakpoints)
(print_one_breakpoint_location): Use print_thread_id.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Use print_thread_id.
* common/print-utils.c (CELLSIZE): Delete.
(get_cell): Rename to ...
(get_print_cell): ... this and made extern. Adjust call callers.
Adjust to use PRINT_CELL_SIZE.
* common/print-utils.h (get_print_cell): Declare.
(PRINT_CELL_SIZE): New.
* gdbthread.h (print_thread_id): Declare.
* infcmd.c (signal_command): Use print_thread_id.
* inferior.c (print_inferior): Use print_thread_id.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe)
(print_signal_received_reason): Use print_thread_id.
* record-btrace.c (record_btrace_info)
(record_btrace_resume_thread, record_btrace_cancel_resume)
(record_btrace_step_thread, record_btrace_wait): Use
print_thread_id.
* thread.c (thread_apply_all_command): Use print_thread_id.
(print_thread_id): New function.
(thread_apply_command): Use print_thread_id.
(thread_command, thread_find_command, do_captured_thread_select):
Use print_thread_id.
So a script can easily get at a thread's inferior and its number.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.inferior.
* python/py-infthread.c (thpy_get_inferior): New.
(thread_object_getset): Register "inferior".
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.python/py-infthread.exp: Test InferiorThread.inferior.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* python.texi (Threads In Python): Document
InferiorThread.inferior.
This commit merges both the registers and $_siginfo "thread
running/executing" checks into a single function.
Accessing $_siginfo from a "catch signal" breakpoint condition doesn't
work. The condition always fails with "Selected thread is running":
(gdb) catch signal
Catchpoint 3 (standard signals)
(gdb)
condition $bpnum $_siginfo.si_signo == 5
(gdb) continue
Continuing.
Error in testing breakpoint condition:
Selected thread is running.
Catchpoint 3 (signal SIGUSR1), 0x0000003615e35877 in __GI_raise (sig=10) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(gdb)
When accessing the $_siginfo object, we check whether the thread is
marked running (external/public) state and refuse the access if so.
This is so "print $_siginfo" at the prompt fails nicelly when the
current thread is running. While evaluating breakpoint conditionals,
we haven't decided yet whether the thread is going to stop, so
is_running still returns true, and we thus always error out.
Evaluating an expression that requires registers access is really
conceptually the same -- we could think of $_siginfo as a pseudo
register. However, in that case we check whether the thread is marked
executing (internal/private state), not running (external/public
state). Changing the $_siginfo validation to check is_executing as
well fixes the bug in question.
Note that checking is_executing is not fully correct, not even for
registers. See PR 19389. However, I think this is the lesser of two
evils and ends up as an improvement. We at least now have a single
place to fix.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* frame.c (get_current_frame): Use validate_registers_access.
* gdbthread.h (validate_registers_access): Declare.
* infrun.c (validate_siginfo_access): Delete.
(siginfo_value_read, siginfo_value_write): Use
validate_registers_access.
* thread.c (validate_registers_access): New function.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* gdb.base/catch-signal-siginfo-cond.c: New file.
* gdb.base/catch-signal-siginfo-cond.exp: New file.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
This patch fixes the following GDB build error in C++ mode.
gdb/nat/linux-ptrace.c: In function 'int linux_child_function(void*)':
gdb/nat/linux-ptrace.c:323:65: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
linux_fork_to_function (child_stack, linux_grandchild_function);
^
gdb:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* nat/linux-ptrace.c (linux_child_function): Cast child_stack
to gdb_byte * and pass to linux_fork_to_function.
We need to use -Wno-missing-prototypes for now as much of the code
sticks externs in local files and not in common headers.
2016-01-11 Mike Frysinger <vapier@gentoo.org>
* acinclude.m4: Include new ../warning.m4 file.
* configure: Regenerated.
* configure.ac: Replace all warning logic with AM_GDB_WARNINGS.
I see the following compile error with an old bfin-uclinux gcc to
build GDBserver,
cc1: warnings being treated as errors
gdb/gdbserver/../nat/linux-ptrace.c: In function 'linux_fork_to_function':
gdb/gdbserver/../nat/linux-ptrace.c:283: error: passing argument 1 of 'clone' from incompatible pointer type
in glibc, clone's prototype is like this, and in uClibc, it is the same,
int clone(int (*fn)(void *), void *child_stack,
int flags, void *arg, ...
/* pid_t *ptid, struct user_desc *tls, pid_t *ctid */ );
so this patch changes function signature from 'void (*function) (gdb_byte *)'
to 'int (*function) (void *)'.
Note that I find Pedro advised to change argument type from 'void *'
to 'gdb_byte *' during the patch review
https://sourceware.org/ml/gdb-patches/2013-08/msg00611.html however,
I think fix compile error can justify the change back to 'void *'.
gdb:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* nat/linux-ptrace.c (linux_fork_to_function): Change type
of argument 'function'.
(linux_grandchild_function): Change return type to 'int'.
Change child_stack's type to 'void *'.
(linux_child_function): Likewise.
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
This patch changes the document that interrupt (ctrl-c) is not ignored
when the program is stopped.
When the interrupt was supported in remote target, people thought interrupt
is meaningless when the program is stopped. See
https://www.sourceware.org/ml/gdb/2005-11/msg00349.htmlhttps://www.sourceware.org/ml/gdb-patches/2005-11/msg00307.html
recently we find it is hard to preserve this feature "ignore interrupt
while program is stopped" when we fix some other bugs. See
https://sourceware.org/ml/gdb-patches/2016-01/msg00039.html
so we think we can go to the simpler approach "not ignoring ctrl-c when
program is stopped". As a result, we tweak the documentation here.
gdb/doc:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Interrupts): Update the document on handling
interrupt when program is stopped.
This exposes the issued fixed by 2f99e8fc9cb8:
https://sourceware.org/ml/gdb-patches/2015-12/msg00423.html
to native debugging as well.
gdb/testsuite/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
* gdb.base/random-signal.exp (do_test): New procedure, with body
of testcase moved in.
(top level) Call it twice, once with "run" and once with "attach".
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
3ca22649a6 is the first bad commit
commit 3ca22649a6
Author: Simon Marchi <simon.marchi@polymtl.ca>
Date: Mon Dec 21 12:51:54 2015 -0500
Remove HP-UX references fom testsuite
@@ -1013,13 +1013,6 @@ proc localvars_in_indirect_call { } {
#
gdb_test_multiple "finish" "finish from indirectly called function" {
- -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*First.*$gdb_prompt $" {
- #On hppa2.0w-hp-hpux11.00, gdb finishes at one line earlier than
- #hppa1.1-hp-hpux11.00. Therefore, an extra "step" is necessary
- #to continue the test.
- send_gdb "step\n"
- exp_continue
- }
-re ".*\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*Second.*$gdb_prompt $" {
pass "finish from indirectly called function"
}
->
finish^M
Run till exit from #0 call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
0x0804a189 in main () at ./gdb.base/funcargs.c:583^M
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */^M
-(gdb) step^M
-584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
-(gdb) PASS: gdb.base/funcargs.exp: finish from indirectly called function
+(gdb) FAIL: gdb.base/funcargs.exp: finish from indirectly called function
step^M
-call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
-82 c = 'a';^M
-(gdb) PASS: gdb.base/funcargs.exp: stepping into indirectly called function
+584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
+(gdb) FAIL: gdb.base/funcargs.exp: stepping into indirectly called function
At least on x86_64 with testsuite in -m32 (expecting native i386 would be the
same).
Pedro Alves:
The difference is that with newer GCC there's an extra instruction
after the call which is still assigned to line 583:
$ diff -up /tmp/4.8.3 /tmp/6.0.0 -U 1000
--- /tmp/4.8.3 2016-01-11 12:37:39.611089156 +0000
+++ /tmp/6.0.0 2016-01-11 13:21:00.021127976 +0000
@@ -1,27 +1,30 @@
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
+
I don't know why -m32 changed to push/add instead of mov while 64-bit hasn't.
This is most likely needed on non-x86 ports as well.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/funcargs.exp (finish from indirectly called function):
Reintroduce the case for 'First'.
fe33faff35 is the first bad commit
commit fe33faff35
Author: Simon Marchi <simon.marchi@ericsson.com>
Date: Tue Dec 22 10:52:31 2015 -0500
Remove HP-UX reference in foll-vfork.exp
FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork child follow, finish after tcatch vfork: continue to vfork
It happens for plain gdb.base/foll-vfork.exp runtest on Fedora 23 x86_64.
-Temporary catchpoint 2 (vforked process 24562), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25345), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
-Temporary catchpoint 2 (vforked process 24629), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25411), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
So I have reverted it and just simplified the comment.
The third case is not necessary during testing but I have changed back all the
3 cases.
Pedro Alves:
I know it was that way before, but would you mind moving this to a helper
proc.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
(tcatch_vfork_then_child_follow_exec)
(tcatch_vfork_then_child_follow_exit): Revert back DWARF vfork
identification.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
Regressed by:
commit 762f774785
Author: Pedro Alves <palves@redhat.com>
Date: Thu Dec 10 16:21:06 2015 +0000
Stop using nowarnings in gdb/testsuite/gdb.multi/
+gdb compile failed, gdb/testsuite/gdb.multi/hello.c: In function 'commonfun':
+gdb/testsuite/gdb.multi/hello.c:24:19: warning: implicit declaration of function 'bar' [-Wimplicit-function-declaration]
+ int commonfun() { bar(); } /* from hello */
+ ^
+gdb/testsuite/gdb.multi/hello.c: At top level:
+gdb/testsuite/gdb.multi/hello.c:26:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ bar()
+ ^
+gdb/testsuite/gdb.multi/hello.c:32:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ hello(int x)
+ ^
+gdb/testsuite/gdb.multi/hello.c:38:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ main()
+ ^
+UNTESTED: gdb.multi/base.exp: base.exp
gdb/testsuite/ChangeLog
2016-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.multi/goodbye.c: Fix compilation warnings by adding return types
and reordering the functions.
* gdb.multi/hangout.c: Likewise.
* gdb.multi/hello.c: Likewise.
There are a few errors when trying to run the performance testsuite with
Python 3. This commit fixes them.
In Python 2, it was possible to use relative imports (importing a module
relative to the current one). In Python 3 it isn't. So I use
absolute_import from the __future__ module, which allows Python 2 to
behave like Python 3, and use the Python 3 syntax.
In Python 3, dict.iterkeys doesn't exist anymore. Using dict.keys is a
good compromise in this case.
gdb/testsuite/ChangeLog:
* gdb.perf/lib/perftest/perftest.py: Change relative imports to
absolute.
(SingleStatisticTestResult.report): Use dict.keys instead of
dict.iterkeys.
I see a timeout in gdb.base/random-signal.exp,
Continuing.^M
PASS: gdb.base/random-signal.exp: continue
^CPython Exception <type 'exceptions.KeyboardInterrupt'> <type
exceptions.KeyboardInterrupt'>: ^M
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
it can be reproduced by running random-signal.exp with native-gdbserver
in a loop, like this, and the fail will be shown in about 20 runs,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In the test, the program is being single-stepped for software watchpoint,
and in each internal stop, python unwinder sniffer is used,
#0 pyuw_sniffer (self=<optimised out>, this_frame=<optimised out>, cache_ptr=0xd554f8) at /home/yao/SourceCode/gnu/gdb/git/gdb/python/py-unwind.c:608
#1 0x00000000006a10ae in frame_unwind_try_unwinder (this_frame=this_frame@entry=0xd554e0, this_cache=this_cache@entry=0xd554f8, unwinder=0xecd540)
at /home/yao/SourceCode/gnu/gdb/git/gdb/frame-unwind.c:107
#2 0x00000000006a143f in frame_unwind_find_by_frame (this_frame=this_frame@entry=0xd554e0, this_cache=this_cache@entry=0xd554f8)
at /home/yao/SourceCode/gnu/gdb/git/gdb/frame-unwind.c:163
#3 0x000000000069dc6b in compute_frame_id (fi=0xd554e0) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:454
#4 get_prev_frame_if_no_cycle (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1781
#5 0x000000000069fdb9 in get_prev_frame_always_1 (this_frame=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1955
#6 get_prev_frame_always (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1971
#7 0x00000000006a04b1 in get_prev_frame (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:2213
when GDB goes to python extension, or other language extension, the
SIGINT handler is changed, and is restored when GDB leaves extension
language. GDB only stays in extension language for a very short period
in this case, but if ctrl-c is pressed at that moment, python extension
will handle the SIGINT, and exceptions.KeyboardInterrupt is shown.
Language extension is used in GDB side rather than inferior side,
so GDB should only change SIGINT handler for extension language when
the terminal is ours (not inferior's). This is what this patch does.
With this patch applied, I run random-signal.exp in a loop for 18
hours, and no fail is shown.
gdb:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* extension.c: Include target.h.
(set_active_ext_lang): Only call install_gdb_sigint_handler,
check_quit_flag, and set_quit_flag if target_terminal_is_ours
returns false.
(restore_active_ext_lang): Likewise.
* target.c (target_terminal_is_ours): New function.
* target.h (target_terminal_is_ours): Declare.
Hi,
I see timeout in one of several runs of random-signal.exp like this,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In about every five runs, we can see a fail,
PASS: gdb.base/random-signal.exp: continue
^CFAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
after some investigation, I find '\003' may be discarded by GDBserver when
it is expecting '$'. In GDB side, both normal packets and '\003' are sent
via function send, but GDBserver may receive them at any time, that is to
say, in the receive buffer in GDBserver, '\003' may appear before or after
normal packet. However, current GDBserver doesn't handle this case.
With this patch applied, I don't see this fail in multiple runs.
Although there is still timeout fail, that is a different problem, the
next patch will fix it.
gdb/gdbserver:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If c is '\003', call target hook
request_interrupt.
Complement commit d09f2c3f [target_read_memory&co: no longer return
target_xfer_status] and apply the same change made to the big-endian leg
of the function to the little-endian leg as well.
gdb/
* mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
to `err' in the little-endian leg.
This patch makes arm_get_next_pcs_raw and thumb_get_next_pcs_raw
static.
gdb:
2016-01-06 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
lines below.
(thumb_get_next_pcs_raw): Make it static.
(arm_get_next_pcs_raw): Likewise.
* arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
declaration.
(arm_get_next_pcs_raw): Likewise.
This patch fixes gcc warning when build ARM GDBserver and AArch64
GDBserver,
AArch64 GDBserver:
gdb/gdbserver/linux-aarch32-low.h:36:29: error: 'thumb2_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
^
gdb/gdbserver/linux-aarch32-low.h:34:29: error: 'thumb_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb_breakpoint = 0xde01;
^
gdb/gdbserver/linux-aarch32-low.h:28:28: error: 'arm_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
^
cc1: all warnings being treated as errors
ARM GDBserver:
gdb/gdbserver/linux-aarch32-low.h:34:29: error: 'thumb_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb_breakpoint = 0xde01;
^~~~~~~~~~~~~~~~
gdb/gdbserver/linux-aarch32-low.h:28:28: error: 'arm_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
^~~~~~~~~~~~~~
by simply moving these macros and variables to
linux-aarch32-low.c and only declare thumb2_breakpoint in
linux-aarch32-low.h, which is not perfect, and reveals some issues
in recent arm GDBserver software single step changes. I'll post
follow-up patches.
gdb/gdbserver:
2016-01-06 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.h (arm_abi_breakpoint): Move to
linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
(thumb2_breakpoint): Declare.
* linux-aarch32-low.c (arm_abi_breakpoint): Moved from
linux-aarch32-low.h.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
There has never been a GNU/sim port for the S+Core architecture.
It was added to support private code that has (and most likely
never will) see the light of day [1]. Punt this as we don't do
this for other people. If you want to maintain a proprietary
internal build, then that's not really our problem.
[1] https://sourceware.org/ml/gdb-patches/2009-03/msg00390.html
Multitarget builds currently fail when:
(1) simulator support is enabled (the main --target supports target sim)
(2) powerpc is included in the --enable-targets list
(3) powerpc is not the main/default target (--target)
This is because the powerpc sim provides a non-standard API function
sim_spr_register_name which gdb/rs6000-tdep.c utilizes. Since the sim
does not yet support multitarget, only the sim (if one exists) for the
main target is built. When that target isn't powerpc, this function
is not available leading to linking errors:
rs6000-tdep.c:(.text+0x1e34d): undefined reference to
`sim_spr_register_name'
Fix this by only using that API if the sim linked in is the powerpc
sim.
gdb/ChangeLog:
2016-01-05 Pedro Alves <palves@redhat.com>
PR sim/13418
* configure.ac: Define WITH_PPC_SIM when linking in the sim and
the target is powerpc*.
* configure: Regenerate.
* config.in: Regenerate.
In btrace_pt_readmem_callback, we read memory inside TRY/CATCH and return in
case of an error return value. This corrupts the cleanup chain, which
eventually results in a SEGV when doing or discarding cleanups later on.
gdb/
* btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
testsuite/
* gdb.btrace/dlopen.exp: New.
* gdb.btrace/dlopen.c: New.
* gdb.btrace/dlopen-dso.c: New.
gdb/ChangeLog:
* top.c (print_gdb_version): Change copyright year in version
message.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Change copyright year in
version message.
* server.c (gdbserver_version): Likewise.
Per GDB the "Start of New Year Procedure", this patch
- renames the current ChangeLog into ChangeLog-2015;
- starts a new ChangeLog file.
gdb/ChangeLog:
* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
Tested on x86_64-pc-linux-gnu native-gdbserver, no new regressions.
gdb/gdbserver/ChangeLog:
* server.c (crc32_table): Delete.
(crc32): Use libiberty's xcrc32 function.
2015-12-25 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* lib/gdb.exp (gdb_test): Update comments to clarify that the
PATTERN argument is optional.
The current approach when building Ada programs for testing is
based on the use of a project file (testsuite/gdb.ada/gnat_ada.gpr).
To do that, we pass a number of additional arguments to target_compile,
one of them being the project file (via "-P/path/to/gnat_ada.gpr").
This used to work well-enough, but AdaCore is currently working towards
removing project-file support from gnatmake (the prefered tool for
using project files is gprbuild). So, we need to either switch
the compilation to gprbuild, or stop using project files.
First, using gprbuild is not always what users will be using to
build their applications. So having the option of using gnatmake
provides more flexibility towards exactly reproducing past bugs.
If we ever need a testcase that requires the use of gprbuild, then
I believe support for a new target needs to be added to dejagnu's
target_compile.
Also, the only real reason behind using a project file in the first
place is that we wanted to make it easy to specify the directory
where all compilation artifacts get stored. This is a consequence
of the organization choice we made for gdb.ada to keep each testcase
well organized. It is very easy to achieve that goal without using
project files.
This is therefore what this patch does: It change gdb_compile_ada
to build any program using gnatmake without using a project file
(by temporarily changing the current working directory).
There is a small (beneficial) side-effect; in the situation where
GDB is built in-tree, gnatmake is called as...
% gnatmake [...] unit.adb
... which means that the debugging info in unit.o will say contain
a filename whose name is 'unit.adb', rather than '/path/to/unit.adb'.
This also better matches what users might typically do. But the side-
effect is that the unit name in the GDB output is not always a full
path. This patch tweaks a couple of testcases to make the path part
optional.
gdb/testsuite:
* lib/ada.exp (target_compile_ada_from_dir): New function.
(gdb_compile_ada): Reimplement avoiding the use of project files.
* gdb.ada/gnat_ada.gpr: Delete.
* gdb.ada/cond_lang.exp: Adjust test to make path before
filename optional.
* gdb.ada/small_reg_param.exp: Likewise.
Tested on x86_64-linux, with both in-tree and out-of-tree builds.
One more I just found.
Tested with native, native-gdbserver and native-extended-gdbserver on
Linux.
gdb/testsuite/ChangeLog:
* gdb.base/foll-vork.exp: Remove HP-UX special case.
With any program under GDBserver control on LynxOS, killing
the program from the debugger (using the "kill" command) causes
GDBserver to properly kill the inferior but GDBserver then hangs.
This change of behavior occured after the following change was
applied:
commit f0ea042932e6922c90df3fd0001497d287b97677
Date: Mon Nov 30 16:05:27 2015 +0000
Subject: gdbserver: don't exit until GDB disconnects
One of the changes introduced by the commit above is that
process_serial_event no longer calls exit after handling
the vKill packet. Instead, what happens is that we wait
until captured_main finds that we no longer have any inferior
to debug, at which point it throws_quit. This (normal) exception
is then expected to propagate all the way to the exception handle
in function "main", which calls exit.
However, before the exception gets propagated, the cleanups
are first executed, and one of the cleanups in question is
detach_or_kill_for_exit_cleanup, which was put in place by
captured_main. detach_or_kill_for_exit_cleanup is basically
a wrapper around detach_or_kill_for_exit, which iterates
over all inferiors, and kills them all.
In our case, we have only one inferior, which we have already
killed during the handling for the "vKill" packet. Unfortunately,
we did not properly clean our internal data for that inferior up,
and so detach_or_kill_for_exit thinks that we still have one inferior,
and therefore tries to kill it. This results in lynx_kill being
called, doing the following:
lynx_ptrace (PTRACE_KILL, ptid, 0, 0, 0);
lynx_wait (ptid, &status, 0);
the_target->mourn (process);
The hang is caused by the call to lynx_wait, which waits for
an event from a process which does not exist...
This patch fixes the issue by enhancing lynx_mourn to clean
the threads and process list up.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_delete_thread_callback): New function.
(lynx_mourn): Properly delete our process and all of its
threads. Remove call to clear_inferiors.
Connecting GDB to a LynxOS-178 GDBserver causes GDBserver to crash:
% gdbserver :4444 simple_main
Process simple_main created; pid = 19
Listening on port 4444
Remote debugging from host 205.232.38.10
Segmentation fault (core dumped)
The crash happens in thread_search_callback where the function
calls the_target->thread_stopped (via the thread_stopped macro)
without verifying whether the callback is NULL or not.
For the record, the regression was introduced by:
commit a67a9faef0
Date: Mon Nov 30 16:05:26 2015 +0000
Subject: gdbserver:prepare_access_memory: pick another thread
This patch avoids the crash by checking the value of the callback
first, before calling it.
gdb/gdbserver/ChangeLog:
* target.c (thread_search_callback): Add check that
the thread_stopped target callback is not NULL before
calling it.
The following change...
commit 43499ea30d
Date: Tue Nov 17 15:17:44 2015 +0000
Subject: [C++/mingw] windows-nat.c casts
... causes a small regression in GDB, where we get the following
warning at startup:
% gdb
C:\[...]\gdb.exe: warning: cannot automatically find executable file or library to read symbols.
Use "file" or "dll" command to load executable/libraries directly.
GNU gdb (GDB) 7.10.50.20151218-cvs (with AdaCore local changes)
[...]
(gdb)
The warning comes from _initialize_loadable which tries to dynamically
load some symbols from kernel32.dll and psapi.dll, and in particular:
hm = LoadLibrary ("psapi.dll");
if (hm)
{
GPA (hm, EnumProcessModules);
GPA (hm, GetModuleInformation);
GPA (hm, GetModuleFileNameEx);
}
The problem is that the new GPA macro assumes that the name of
the variable we use to point to the function, and the name of
its associated symbol are the same. This is mostly the case,
except for GetModuleFileNameEx, where the name is provided by
the GetModuleFileNameEx_name macro (defined differently depending
on whether we are on cygwin or not). As a result, the dynamic
resolution for GetModuleFileNameEx returns NULL, and we trip
the following check which leads to the warning:
if (!EnumProcessModules || !GetModuleInformation || !GetModuleFileNameEx)
{
[...]
warning(_("[...]"));
}
This patch fixes the problem by calling GetProcAddress directly,
rather than through the GPA macro, but in a way which hopefully
avoids the C++ compilation warning that the previous patch was
trying to get rid of.
gdb/ChangeLog:
* windows-nat.c (_initialize_loadable): Fix computing of
GetModuleFileNameEx.
This patch removes cases from the testsuite that are not posssibly used. The
messages "Catch of * not yet implemented" were removed here:
https://www.sourceware.org/ml/gdb-patches/2004-01/msg00679.html
I changed the regexp at the same time to match the string more closely.
gdb/testsuite/ChangeLog:
* gdb.base/break.exp: Remove dead code.
* gdb.base/sepdebug.exp: Likewise.
This patch removes all special cases for HP-UX, for which support has
been removed earlier, that I found in the testsuite. Note that the hppa
architecture != HP-UX, since other OSes can run on hppa, so I tried to
leave everything that is not HP-UX specific.
Two complete tests were completely HP-UX specific, so I removed them.
I ran the testsuite on Linux x86-64, native and native-gdbserver, and
noticed no regressions.
gdb/testsuite/ChangeLog:
* gdb.asm/asm-source.exp: Remove HP-UX references.
* gdb.base/annota1.exp: Likewise.
* gdb.base/annota3.exp: Likewise.
* gdb.base/attach.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/catch-fork-static.exp: Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec-mode.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/inferior-died.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/solib1.c: Likewise.
* gdb.base/step-test.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.multi/bkpt-multi-exec.ex: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* lib/future.exp: Likewise.
* lib/gdb.exp: Likewise.
* gdb.base/so-indr-cl.c: Remove.
* gdb.base/so-indr-cl.exp: Likewise.
* gdb.base/solib.c: Likewise.
* gdb.base/solib.exp: Likewise.
* gdb.base/solib2.c: Likewise.
This patch is to get b37a6290 back again, which was removed by
d9311bfa by mistake.
gdb/gdbserver:
2015-12-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.h [__aarch64__]: Use arm_abi_breakpoint
arm breakpoint.
2015-12-18 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* event-top.c (command_handler): Don't require stdin to be a tty
for call to reinitialize_more_filter.
* top.c (command_loop): Likewise.
This patch fixes the cxx build broken by commit : d9311bfaf5.
Pushed as obvious.
gdb/ChangeLog:
* arm-tdep.c (arm_get_next_pcs_read_memory_unsigned_integer): Cast
to enum bfd_endian)
This patch adds some documentation to gdb_compile. It describes the
various options that can influence compilation. Most of them are
handled by DejaGnu, but are not really documented anywhere, so I think
it's good to have a quick reference. Not all possible options are
described, that would add way to much noise. I chose those that I think
are relevant in the context of writing a test case.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_compile): Add function doc.
This patch enables support for conditional breakpoints if the target supports
software single step.
This was disabled before as the implementations of software single step were too
simple as discussed in
https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html.
Since these issues are now fixed support can be added back.
New tests passing :
PASS: gdb.base/cond-eval-mode.exp: set breakpoint condition-evaluation
target and related...
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* server.c (handle_query): Call target_supports_software_single_step.
This patch enables software single stepping if the targets support it,
to do while-stepping actions.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (single_step): New function.
(linux_resume_one_lwp_throw): Call single_step.
(start_step_over): Likewise.
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
This patch is in preparation for software single step support on ARM in
GDBServer. It adds a new shared function regcache_raw_read_unsigned and
regcache_raw_get_unsigned so that GDB and GDBServer can use the same call
to fetch a raw register into an integer.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(COMMON_OBS): Append common/common-regcache.o.
(common-regcache.o): New rule.
* common/common-regcache.h (register_status) New enum.
(regcache_raw_read_unsigned): New declaration.
* common/common-regcache.c: New file.
* regcache.h (enum register_status): Move to common-regcache.h.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_get_unsigned): Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(OBS): Append common-regcache.o.
(common-regcache.o): New rule.
* regcache.c (init_register_cache): Initialize cache to
REG_UNAVAILABLE.
(regcache_raw_read_unsigned): New function.
* regcache.h (REG_UNAVAILABLE, REG_VALID): Replaced by shared
register_status enum.
This patch is in preparation for software single step support on ARM in
GDBServer. It refactors arm_*_software_single_step and sub-functions to
use regcache instead of frame to access registers so that the code can be
shared more easily between GDB and GDBServer.
Note also that since the intention is at some point to get rid of frame
completely in that function, memory reads have also been replaced by
read_memory_unsigned_integer rather than get_frame_memory_unsigned.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc_offset): New function.
(arm_linux_sigreturn_next_pc): Likewise.
(arm_linux_syscall_next_pc): Use regcache instead of frame.
(arm_linux_software_single_step): Likewise.
* arm-tdep.c (arm_is_thumb): New function.
(shifted_reg_va): Use regcache instead of frame.
(thumb_get_next_pc_raw): Likewise.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_software_single_step): Likewise.
* arm-tdep.h (struct gdbarch_tdep): Use regcache for syscall_next_pc.
(arm_get_next_pc): Use regcache.
(arm_deal_with_atomic_sequence): Likewise.
(arm_is_thumb): New declaration.
* regcache.c (regcache_raw_get_unsigned): New function.
* regcache.h (regcache_raw_get_unsigned): New function declaration.
This patch is in preparation for software single stepping support on ARM
it shares some functions and definitions that will be needed.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Not tested: wince/bsd build.
gdb/ChangeLog:
* arch/arm.c (bitcount): Move from arm-tdep.c.
(condition_true): Likewise.
* arch/arm.h (Instruction Definitions): Move form arm-tdep.h.
(condition_true): Move defenition from arm-tdep.h.
(bitcount): Likewise.
* arm-tdep.c (condition_true): Move to arch/arm.c.
(bitcount): Likewise.
* arm-tdep.h (Instruction Definitions): Move to arch/arm.h.
* arm-wince-tdep.c: Include arch/arm.h.
* armnbsd-tdep.c: Likewise.
This patch in preparation for software single step support on ARM. It refactors
breakpoint_reinsert_addr into get_next_pcs so that multiple location can be
returned.
When software single stepping there can be multiple possible next addresses
because we're stepping over a conditional branch instruction, for example.
The operation get_next_pcs handles that by returning a vector of all the
possible next addresses.
Software breakpoints are installed at each location returned.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (the_low_targets): Rename
breakpoint_reinsert_addr to get_next_pcs.
* linux-arm-low.c (the_low_targets): Likewise.
* linux-bfin-low.c (the_low_targets): Likewise.
* linux-cris-low.c (the_low_targets): Likewise.
* linux-crisv32-low.c (the_low_targets): Likewise.
* linux-low.c (can_software_single_step): Likewise.
(install_software_single_step_breakpoints): New function.
(start_step_over): Use install_software_single_step_breakpoints.
* linux-low.h: New CORE_ADDR vector.
(struct linux_target_ops) Rename breakpoint_reinsert_addr to
get_next_pcs.
* linux-mips-low.c (the_low_targets): Likewise.
* linux-nios2-low.c (the_low_targets): Likewise.
* linux-sparc-low.c (the_low_targets): Likewise.
Note: this applies on top of:
[PATCH] Remove support for LinuxThreads and vendor 2.4 kernels w/ backported NPTL
https://sourceware.org/ml/gdb-patches/2015-12/msg00214.html
We try to avoid using libthread_db.so to list threads in the inferior
when debugging live processes, but the code that decides whether to
use it decides incorrectly if you have more than one inferior, and the
current inferior doesn't have execution yet. The result is visible
as:
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 15397 /home/pedro/gdb/tests/threads
* 2 <null>
(gdb) info threads
Cannot find new threads: generic error
(gdb)
Fix this by checking whether each inferior has execution rather than
just the current inferior.
By moving the core updating to linux-nat.c's update_thread_list
implementation, this also ends up fixing the
lwp-last-seen-running-on-core updating in the case we're debugging a
program that uses raw clone rather than pthreads, as linux-thread-db.c
isn't pushed in the target stack in that scenario.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-12-17 Pedro Alves <palves@redhat.com>
PR threads/19354
* linux-nat.c (linux_nat_update_thread_list): Update process cores
each lwp was last seen running on here.
* linux-thread-db.c (update_thread_core): Delete.
(thread_db_update_thread_list_td_ta_thr_iter): Rename to ...
(thread_db_update_thread_list): ... this. Skip inferiors with
execution. Also call the target beneath.
(thread_db_update_thread_list): Delete.
gdb/testsuite/ChangeLog:
2015-12-17 Pedro Alves <palves@redhat.com>
PR threads/19354
* gdb.multi/info-threads.exp: New file.
Since we now rely on PTRACE_EVENT_CLONE being available (added in
Linux 2.5.46), we're relying on NPTL.
This commit removes the support for older LinuxThreads, as well as the
workarounds for vendor 2.4 kernels with NPTL backported.
- Rely on tkill being available.
- Assume gdb doesn't get cancel signals.
- Remove code that checks the LinuxThreads restart and cancel signals
in the inferior.
- Assume that __WALL is available.
- Assume that non-leader threads report WIFEXITED.
- Thus, no longer need to send signal 0 to check whether threads are
still alive.
- Update comments throughout.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
* configure.ac: Remove tkill checks.
* configure, config.in: Regenerate.
* linux-nat.c: Remove HAVE_TKILL_SYSCALL check. Update top level
comments.
(linux_nat_post_attach_wait): Remove 'cloned' parameter. Use
__WALL.
(attach_proc_task_lwp_callback): Don't set the cloned flag.
(linux_nat_attach): Adjust.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_handle_extended_wait): Use __WALL. Don't set the cloned
flag.
(wait_lwp): Use __WALL. Update comments.
(running_callback, stop_and_resume_callback): Delete.
(linux_nat_filter_event): Don't stop and resume all lwps. Don't
check if the event LWP has previously exited.
(check_zombie_leaders): Update comments.
(linux_nat_wait_1): Use __WALL.
(kill_wait_callback): Don't handle clone processes separately.
Use __WALL instead.
(linux_thread_alive): Delete.
(linux_nat_thread_alive): Return true as long as the LWP is in the
LWP list.
(linux_nat_update_thread_list): Assume the kernel supports
PTRACE_EVENT_CLONE.
(get_signo): Delete.
(lin_thread_get_thread_signals): Remove LinuxThreads references.
No longer check __pthread_sig_restart / __pthread_sig_cancel in
the inferior.
* linux-nat.h (struct lwp_info) <cloned>: Delete field.
* linux-thread-db.c: Update comments.
(_initialize_thread_db): Remove LinuxThreads references.
* nat/linux-waitpid.c (my_waitpid): No longer emulate __WALL.
Pass down flags unmodified.
* linux-waitpid.h (my_waitpid): Update documentation.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_kill_one_lwp): Remove references to
LinuxThreads.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_init_signals): Delete.
(initialize_low): Adjust.
* thread-db.c (thread_db_init): Remove LinuxThreads reference.
Hi,
AddressSanitizer reports an error like this,
(gdb) PASS: gdb.base/call-ar-st.exp: continue to tbreak9
print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
=================================================================
==6236==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60200008eb50 at pc 0x89e432 bp 0x7fffa3df9080 sp 0x7fffa3df9078
READ of size 5 at 0x60200008eb50 thread T0
#0 0x89e431 in memory_xfer_partial gdb/target.c:1264
#1 0x89e6c7 in target_xfer_partial gdb/target.c:1320
#2 0x89f267 in target_write_partial gdb/target.c:1595^M
#3 0x8a014b in target_write_with_progress gdb/target.c:1889^M
#4 0x8a0262 in target_write gdb/target.c:1914^M
#5 0x89ee59 in target_write_memory gdb/target.c:1492^M
#6 0x9a1c74 in write_memory gdb/corefile.c:393^M
#7 0x467ea5 in aarch64_push_dummy_call gdb/aarch64-tdep.c:1388
The problem is that an instance of stack_item_t is created to adjust
stack for alignment, the item.len is correct, but item.data is buf,
which is wrong, because item.len can be greater than the length of
buf. This patch sets item.data to NULL, and only update sp (no
inferior memory writes on stack for this item).
gdb:
2015-12-17 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (struct stack_item_t): Update comments.
(pass_on_stack): Set item.data to NULL.
(aarch64_push_dummy_call): Call write_memory if si->data
isn't NULL.
Ref: https://sourceware.org/ml/gdb/2015-12/msg00024.html
We have code in configure.ac that tries to detect whether the compiler
supports each warning and suppress it if not, but that doesn't work
with "-Wno-" options, because gcc doesn't error out for
-Wno-unknown-warning unless other diagnostics are being produced.
See https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html.
Handle this by checking whether -Wfoo works when we actually want
-Wno-foo.
gdb/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
Ref: https://sourceware.org/ml/gdb/2015-12/msg00014.html
Fixes the build in C++ mode with g++ 4.4:
gdb/btrace.h: In function ‘size_t VEC_btrace_insn_s_embedded_size(int)’:
gdb/btrace.h:84: error: invalid access to non-static data member ‘VEC_btrace_insn_s::vec’ of NULL object
gdb/btrace.h:84: error: (perhaps the ‘offsetof’ macro was used incorrectly)
gdb/btrace.h: In function ‘VEC_btrace_insn_s* VEC_btrace_insn_s_alloc(int)’:
gdb/btrace.h:84: error: invalid access to non-static data member ‘VEC_btrace_insn_s::vec’ of NULL object
gdb/btrace.h:84: error: (perhaps the ‘offsetof’ macro was used incorrectly)
gdb/btrace.h: In function ‘VEC_btrace_insn_s* VEC_btrace_insn_s_copy(VEC_btrace_insn_s*)’:
gdb/btrace.h:84: error: invalid access to non-static data member ‘VEC_btrace_insn_s::vec’ of NULL object
gdb/btrace.h:84: error: (perhaps the ‘offsetof’ macro was used incorrectly)
gdb/btrace.h: In function ‘VEC_btrace_insn_s* VEC_btrace_insn_s_merge(VEC_btrace_insn_s*, VEC_btrace_insn_s*)’:
gdb/btrace.h:84: error: invalid access to non-static data member ‘VEC_btrace_insn_s::vec’ of NULL object
gdb/btrace.h:84: error: (perhaps the ‘offsetof’ macro was used incorrectly)
gdb/btrace.h: In function ‘int VEC_btrace_insn_s_reserve(VEC_btrace_insn_s**, int, const char*, unsigned int)’:
gdb/btrace.h:84: error: invalid access to non-static data member ‘VEC_btrace_insn_s::vec’ of NULL object
gdb/btrace.h:84: error: (perhaps the ‘offsetof’ macro was used incorrectly)
gdb/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* common/vec.h (vec_offset): New macro.
(DEF_VEC_ALLOC_FUNC_I, DEF_VEC_ALLOC_FUNC_O): Use it instead of
offsetof.
Some tests are skipped on aarch64 unexpectedly because arg0exp isn't
set. This patch is to set arg0exp to "$x0" for aarch64.
gdb/testsuite:
2015-12-15 Yao Qi <yao.qi@linaro.org>
* gdb.trace/ftrace.exp: Set arg0exp to "$x0" if target
is aarch64*-*-*.
This patch implements documentation updates for target remote mode fork and
exec events. A summary of the rationale for the changes made here:
* Connecting to a remote target -- explain that the two protocols exist.
* Connecting in target remote mode -- explain invoking gdbserver for target
remote mode, and move remote-specific text from original "Connecting to a
remote target" section.
* Connecting in target extended-remote mode -- promote this section from
"Using the gdbserver Program | Running gdbserver | Multi-Process Mode for
gdbserver". Put it next to the target remote mode section.
* Host and target files -- collect paragraphs dealing with how to locate
symbol files from original sections "Connecting to a remote target" and
"Using the gdbserver program | Connecting to gdbserver".
* Steps for connecting to a remote target -- used to be "Using the
gdbserver program | Connecting to gdbserver"
* Remote connection commands -- used to be the bulk of "Connecting to a
remote target". Added "target extended-remote" commands and information.
gdb/ChangeLog:
* NEWS: Announce fork and exec event support for target remote.
gdb/doc/ChangeLog:
* gdb.texinfo (Forks): Correct Linux kernel version where
fork and exec events are supported, add notes about support
of these events in target remote mode.
(Connecting): Reorganize and clarify distinctions between
target remote, extended-remote, and multiprocess.
Reorganize related text from separate sections into new
sections.
(Server): Note effects of target extended-remote mode.
Delete section on Multi-Process Mode for gdbserver.
Move some text to "Connecting" node.
This patch implements support for fork and exec events with target remote
mode Linux targets. For such targets with Linux kernels 2.5.46 and later,
this enables follow-fork-mode, detach-on-fork and fork and exec
catchpoints.
The changes required to implement this included:
* Don't exit from gdbserver if there are still active inferiors.
* Allow changing the active process in remote mode.
* Enable fork and exec events in remote mode.
* Print "Ending remote debugging" only when disconnecting.
* Combine remote_kill and extended_remote_kill into a single function
that can handle the multiple inferior case for target remote. Also,
the same thing for remote_mourn and extended_remote_mourn.
* Enable process-style ptids in target remote.
* Remove restriction on multiprocess mode in target remote.
gdb/gdbserver/ChangeLog:
* server.c (process_serial_event): Don't exit from gdbserver
in remote mode if there are still active inferiors.
gdb/ChangeLog:
* inferior.c (number_of_live_inferiors): New function.
(have_live_inferiors): Use number_of_live_inferiors in place
of duplicate code.
* inferior.h (number_of_live_inferiors): Declare new function.
* remote.c (set_general_process): Remove restriction on target
remote mode.
(remote_query_supported): Likewise.
(remote_detach_1): Exit in target remote mode only when there
is just one live inferior left.
(remote_disconnect): Unpush the target directly instead of
calling remote_mourn.
(remote_kill): Rewrite function to handle both target remote
and extended-remote. Call remote_kill_k.
(remote_kill_k): New function.
(extended_remote_kill): Delete function.
(remote_mourn, extended_remote_mourn): Combine functions into
one, remote_mourn, and enable extended functionality for target
remote.
(remote_pid_to_str): Enable "process" style ptid string for
target remote.
(remote_supports_multi_process): Remove restriction on target
remote mode.
Iain Buclaw
Simon Marchi
Yao Qi
Kevin Buettner
Joel Brobecker
John Baldwin
Mark Wielaard
Pedro Alves
Marcin Kościelnicki
Jan Kratochvil
Doug Evans
Andrew Burgess
Simon Marchi
Andreas Arnez
Antoine Tremblay
Maciej W. Rozycki
Gary Benson
Jonas Hahnfeld
Sandra Loosemore
Ulrich Weigand
Josh Stone
Mike Frysinger
Thomas Schwinge
Markus Metzger
Patrick Palka
Thomas Preud'homme
Don Breazeal