Nowadays, both aarch64 GDB and linux kernel assumes that address for
setting breakpoint should be 4-byte aligned. However that is not true
after we support multi-arch, because thumb instruction can be at 2-byte
aligned address. Patch http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/375141.html
to linux kernel is to teach kernel to handle 2-byte aligned address for
HW breakpoint, while this patch is to teach aarch64 GDB handle 2-byte
aligned address.
First of all, we call gdbarch_breakpoint_from_pc to get the instruction
length rather than using hard-coded 4. Secondly, in GDBserver, we set
length back to 2 if it is 3, because GDB encode 3 in it to indicate it
is a 32-bit thumb breakpoint. Then we relax the address alignment
check from 4-byte aligned to 2-byte aligned.
This patch enables some tests (such as gdb.base/break-idempotent.exp,
gdb.base/cond-eval-mode.exp, gdb.base/watchpoint-reuse-slot.exp,) and
fixes many fails (such as gdb.base/hbreak2.exp) when the program is
compiled in thumb mode on aarch64.
Regression tested on aarch64-linux, both native and gdbserver. This
is the last patch of multi-arch work.
gdb:
2015-10-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint):
Call gdbarch_breakpoint_from_pc to instruction length.
(aarch64_linux_remove_hw_breakpoint): Likewise.
* common/common-regcache.h (regcache_register_size): Declare.
* nat/aarch64-linux-hw-point.c: Include "common-regcache.h".
(aarch64_point_is_aligned): Set alignment to 2 for breakpoint if
the process is 32bit, otherwise set alignment to 4.
(aarch64_handle_breakpoint): Update comments.
* regcache.c (regcache_register_size): New function.
gdb/gdbserver:
2015-10-15 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_insert_point): Set len to 2
if it is 3.
(aarch64_remove_point): Likewise.
* regcache.c (regcache_register_size): New function.
The main aim of this patch is to perform more objcopy tests when we
can build executables but not run them. ie. non-native with cross
compiler available.
* binutils-all/objcopy.exp: Delete trailing whitespace. Use
"string equal" rather than "string match" when making simple
string comparisons. Revert 2008-07-08 host_triplet checks.
Perform non-run tests when we can build executable.
(strip_executable, strip_executable_with_saving_a_symbol): Move
run test later. Take extra param on whether to perform run test.
Update callers.
(keep_debug_symbols_and_test_copy): Delete unused vars.
Run the test for more than just ELF. Shows that objcopy --extract-symbol
isn't working on PE, mips, mmix and some aout targets.
* config/default.exp (size): New global.
* ld-elf/extract-symbol-1.s,
* ld-elf/extract-symbol-1.ld,
* ld-elf/extract-symbol-1sec.d,
* ld-elf/extract-symbol-1sym.d: Delete.
* ld-scripts/script.exp (extract_symbol_test): New.
Calling bfd_copy_private_bfd_data is necessary to copy ELF file header
info.
binutils/
* objcopy.c (copy_object): Don't omit bfd_copy_private_bfd_data
call when extract_symbol.
bfd/
* elf32-v850.c (v850_elf_copy_private_bfd_data): Remove assertion
that input and output .note.renesas sections are same size.
Instead, only copy input to output if they are.
opcodes/ChangeLog:
2015-10-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Fix comment.
* s390-opc.txt: Change instruction type for troo, trot, trto, and
trtt to RRF_U0RER since the second parameter does not need to be a
register pair.
gas/testsuite/ChangeLog:
2015-10-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/esa-g5.d: Use odd GPR for the second operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
This patch moves the definition of enum out of the scope of struct
aarch64_memory_operand, otherwise it breaks GDB build in c++ mode.
gdb:
2015-10-14 Yao Qi <yao.qi@linaro.org>
* arch/aarch64-insn.h (struct aarch64_memory_operand): Move enum
out of it.
(enum aarch64_memory_operand_type): New.
This fixes a few build errors like these in C++ mode:
src/gdb/reverse.c: In function ‘void exec_reverse_once(char*, char*, int)’:
src/gdb/reverse.c:49:34: error: invalid conversion from ‘int’ to ‘exec_direction_kind’ [-fpermissive]
enum exec_direction_kind dir = execution_direction;
^
make: *** [reverse.o] Error 1
gdb/ChangeLog:
2015-10-13 Pedro Alves <palves@redhat.com>
* infrun.c (restore_execution_direction): New function.
(fetch_inferior_event): Use it instead of
make_cleanup_restore_integer.
(execution_direction): Change type to enum
exec_direction_kind.
* infrun.h (execution_direction): Likewise.
No functional changes here.
* elf.c (_bfd_elf_map_sections_to_segments): Don't set
PT_GNU_RELRO p_flags.
(assign_file_positions_for_non_load_sections): Set PT_GNU_RELRO
flags to PF_R here.
Remove an unneeded parameter from parse_frame_specification, replace
with a fixed string within parse_frame_specification. The message was
the same in every place that parse_frame_specification was used anyway.
gdb/ChangeLog:
* stack.c (parse_frame_specification): Remove message parameter,
replace with fixed string in function body, update function
comment.
(frame_info): Remove message to parse_frame_specification.
(select_frame_command): Likewise.
Within the stack command there are a couple of places where fixed
strings are passed into functions that are really intended for
processing user input. These fixed strings are then processed and the
result returned.
Given that the input strings in these cases are fixed, and are always
"0", then the result will always be the same, the current frame. By
switching to using get_current_frame instead the code can be simplified,
and the intention of the code is clearer.
gdb/ChangeLog:
* stack.c (parse_frame_specification): Delete.
(parse_frame_specification_1): Rename to
parse_frame_specification.
(frame_info): Use parse_frame_specification.
(select_frame_command): Likewise.
(return_command): Use select_frame and print_stack_frame rather
than frame_command and select_frame_command.
(func_command): Use get_current_frame rather than
parse_frame_specification.
The func command, available when starting gdb in dbx mode, is supposed
to take a function name and locate the frame for that function in the
stack. This has been broken for a while due to an invalid check of the
arguments within the worker function. Fixed in this commit.
gdb/ChangeLog:
* stack.c (func_command): Return early when there is no ARG
string.
gdb/testsuite/ChangeLog:
* gdb.base/dbx.exp (test_func): Remove xfails, update expected
results.
The 'frame' command is documented in two places. The 'select-frame'
command is only mentioned in one of these places.
Of the two places, having the description of 'frame' and 'select-frame'
in the section 'Selecting a Frame' seems like the most obvious choice,
which is where things like 'up' and 'down' are also documented.
This commit moves the documentation of 'frame' and 'select-frame' into
the 'Selecting a Frame' section, and removes the duplicate documentation
of the 'frame' command.
At the same time I have reordered the sections in the 'Examining the
Stack' chapter, moving the discussion of frame filters to the end of the
chapter; it feels odd that we talk about frame filters before such basic
things like navigating the stack, or examining stack frames in general.
gdb/doc/ChangeLog:
* gdb.texinfo (Frames): Remove 'frame' and 'select-frame'
description.
(Frame Filter Management): Move to later in the 'Examining the
Stack' chapter.
(Selection): Add entry for 'select-frame'.
In stack.c switch to using safe-ctype.h instead of ctype.h, update code
as required.
gdb/ChangeLog:
* stack.c: Include safe-ctype.h not ctype.h.
(parse_frame_specification): Use ISSPACE not isspace.
(backtrace_command): Use TOLOWER not tolower.
This allows to avoid casting away the const qualification in
m32c_pseudo_register_write (which is the entry points for all other
register read/write functions).
Also, use gdb_byte* instead of void* to avoid casts when calling gdb
common memory functions. It also allows to remove those "For adderss
arithmetic" local variables.
gdb/ChangeLog:
* m32c-tdep.c (m32c_move_reg_t): Replace with...
(m32c_write_reg_t): ...this and...
(m32c_read_reg_t): ...this.
(struct m32c_reg): Update types of read and write.
(m32c_raw_read): Change declaration type to m32c_read_reg_t and
adjust definition.
(m32c_banked_read): Likewise.
(m32c_sb_read): Likewise.
(m32c_part_read): Likewise.
(m32c_cat_read): Likewise.
(m32c_r3r2r1r0_read): Likewise.
(m32c_raw_write): Change declaration type to m32c_write_reg_t
and adjust definition.
(m32c_banked_write): Likewise.
(m32c_sb_write): Likewise.
(m32c_part_write): Likewise.
(m32c_cat_write): Likewise.
(m32c_r3r2r1r0_write): Likewise.
We may see an unversioned definition after the default version. We
should skip the unversioned definition in this case.
bfd/
PR ld/19073
* elflink.c (_bfd_elf_add_default_symbol): Skip the unversioned
definition after the default version.
ld/testsuite/
PR ld/19073
* ld-elf/pr19073.map: New file.
* ld-elf/pr19073.rd: Likewise.
* ld-elf/pr19073.s: Likewise.
* ld-elf/shared.exp (build_tests): Add tests for PR ld/19073.
* config/tc-msp430.c (msp430_mcu_names): Rename to
msp430_mcu_data. Add fields for the ISA and hardware multiply
support. Update with information from the latest devices.csv
file.
(md_parse_option): Make use of the new array.
Likewise, this patch renames emit_load_store to
aarch64_emit_load_store.
gdb:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* arch/aarch64-insn.c (emit_load_store): Rename to ...
(aarch64_emit_load_store): ... it. All callers updated.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c: Update all callers as emit_load_store
is renamed to aarch64_emit_load_store.
As emit_insn becomes extern, the prefix "aarch64_" is needed. This
patch renames emit_insn to aarch64_emit_insn.
gdb:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* arch/aarch64-insn.c (emit_insn): Rename to ...
(aarch64_emit_insn): ... it. All callers updated.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c: Update all callers of function renaming
from emit_insn to aarch64_emit_insn.
This patch adds a new test case which uses gdb.arch/insn-reloc.c too
to test displaced stepping. Nowadays, tests are for x86, x86_64 and
aarch64.
gdb/testsuite:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* gdb.arch/disp-step-insn-reloc.exp: New test case.
This patch is to support displaced stepping in aarch64-linux. A
visitor is implemented for displaced stepping, and used to record
information to fixup pc after displaced stepping if needed. Some
emit_* functions are converted to macros, and moved to
arch/aarch64-insn.{c,h} so that they can be shared.
gdb:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c: Include arch-utils.h.
(aarch64_linux_init_abi): Call set_gdbarch_max_insn_length,
set_gdbarch_displaced_step_copy_insn,
set_gdbarch_displaced_step_fixup,
set_gdbarch_displaced_step_free_closure,
set_gdbarch_displaced_step_location,
and set_gdbarch_displaced_step_hw_singlestep.
* aarch64-tdep.c (struct displaced_step_closure): New.
(struct aarch64_displaced_step_data): New.
(aarch64_displaced_step_b): New function.
(aarch64_displaced_step_b_cond): Likewise.
(aarch64_register): Likewise.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
(aarch64_displaced_step_adr): Likewise.
(aarch64_displaced_step_ldr_literal): Likewise.
(aarch64_displaced_step_others): Likewise.
(aarch64_displaced_step_copy_insn): Likewise.
(aarch64_displaced_step_fixup): Likewise.
(aarch64_displaced_step_hw_singlestep): Likewise.
* aarch64-tdep.h (DISPLACED_MODIFIED_INSNS): New macro.
(aarch64_displaced_step_copy_insn): Declare.
(aarch64_displaced_step_fixup): Declare.
(aarch64_displaced_step_hw_singlestep): Declare.
* arch/aarch64-insn.c (emit_insn): Moved from
gdbserver/linux-aarch64-low.c.
(emit_load_store): Likewise.
* arch/aarch64-insn.h (enum aarch64_opcodes): Moved from
gdbserver/linux-aarch64-low.c.
(struct aarch64_register): Likewise.
(struct aarch64_memory_operand): Likewise.
(ENCODE): Likewise.
(can_encode_int32): New macro.
(emit_b, emit_bcond, emit_cb, emit_ldr, emit_ldrsw): Likewise.
(emit_tb, emit_nop): Likewise.
(emit_insn): Declare.
(emit_load_store): Declare.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (enum aarch64_opcodes): Move to
arch/aarch64-insn.h.
(struct aarch64_memory_operand): Likewise.
(ENCODE): Likewise.
(emit_insn): Move to arch/aarch64-insn.c.
(emit_b, emit_bcond, emit_cb, emit_tb): Remove.
(emit_load_store): Move to arch/aarch64-insn.c.
(emit_ldr, emit_ldrb, emit_ldrsw, emit_nop): Remove.
(can_encode_int32): Remove.
This patch moves aarch64_relocate_instruction and visitor class to
arch/aarch64-insn.c, so that both GDB and GDBserver can use it.
gdb:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* arch/aarch64-insn.c (aarch64_decode_ldr_literal): Moved from
gdbserver/linux-aarch64-low.c.
(aarch64_relocate_instruction): Likewise.
* arch/aarch64-insn.h (aarch64_decode_ldr_literal): Declare.
(struct aarch64_insn_data): Moved from
gdbserver/linux-aarch64-low.c.
(struct aarch64_insn_visitor): Likewise.
(aarch64_relocate_instruction): Declare.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (extract_signed_bitfield): Remove.
(aarch64_decode_ldr_literal): Move to gdb/arch/aarch64-insn.c.
(aarch64_relocate_instruction): Likewise.
(struct aarch64_insn_data): Move to gdb/arch/aarch64-insn.h.
(struct aarch64_insn_visitor): Likewise.
Nowadays, the instruction decodings and handling are mixed together
inside aarch64_relocate_instruction. The patch decouples instruction
decoding and instruction handling by using visitor pattern. That is,
aarch64_relocate_instruction decode instructions and visit each
instruction by different visitor methods. Each visitor defines the
concrete things to different instructions. Fast tracepoint instruction
relocation and displaced stepping can define their own visitors,
sub-class of struct aarch64_insn_data.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (struct aarch64_insn_data): New.
(struct aarch64_insn_visitor): New.
(struct aarch64_insn_relocation_data): New.
(aarch64_ftrace_insn_reloc_b): New function.
(aarch64_ftrace_insn_reloc_b_cond): Likewise.
(aarch64_ftrace_insn_reloc_cb): Likewise.
(aarch64_ftrace_insn_reloc_tb): Likewise.
(aarch64_ftrace_insn_reloc_adr): Likewise.
(aarch64_ftrace_insn_reloc_ldr_literal): Likewise.
(aarch64_ftrace_insn_reloc_others): Likewise.
(visitor): New.
(aarch64_relocate_instruction): Use visitor.
aarch64_relocate_instruction should only decode instructions, and other
operations should be done out side of it. This patch moves append_insns
out of aarch64_relocate_instruction, to its caller.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_relocate_instruction): Return
int. Add argument buf.
(aarch64_install_fast_tracepoint_jump_pad): Pass buf to
aarch64_relocate_instruction.
GDB Administrator
H.J. Lu
Yao Qi
Alan Modra
Simon Marchi
Aleksandar Ristovski
Simon Dardis
Riku Voipio
Rich Felker
Andreas Krebbel
Nick Clifton
David Edelsohn
Pedro Alves
Simon Marchi
James Bowman
Andrew Burgess