Nowadays, set_breakpoint_at creates breakpoint of type
other_breakpoint, but we also use set_breakpoint_at
in set_reinsert_breakpoint to create breakpoint, so that
we have to overwrite the breakpoint type like this,
bp = set_breakpoint_at (stop_at, NULL);
bp->type = reinsert_breakpoint;
which looks not very good. This patch changes set_breakpoint_at
to receive breakpoint type. Since set_breakpoint_at is
used in many places, I rename it to set_breakpoint_type_at, and wrap
it with set_breakpoint_at, and pass other_breakpoint. In this way,
we can call set_breakpoint_type_at with reinsert_breakpoint in
set_reinsert_breakpoint too, and code looks cleaner.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* mem-break.c (set_breakpoint_at): Rename it to ...
(set_breakpoint_type_at): ... it.
(set_breakpoint_at): Call set_breakpoint_type_at.
(set_reinsert_breakpoint): Call set_breakpoint_type_at.
* mem-break.h (set_breakpoint_at): Update comments.
This commit fixes detaching on Linux when some thread exits the whole
thread group (process) just while we're detaching.
On Linux, a ptracer must detach from each LWP individually, with
PTRACE_DETACH. Since PTRACE_DETACH sets the thread running free, if
one of the already-detached threads causes the whole thread group to
exit (e.g., simply calls exit), the kernel force-kills the other
threads in the group, making them zombie, just as we're still
detaching them. Since PTRACE_DETACH against a zombie thread fails
with ESRCH, and gdb/gdbserver are not expecting this, the detach fails
with an error like: "Can't detach process: No such process.".
This patch detects this detach failure as normal, and instead of
erroring out, reaps the now-dead thread.
New test included, that exercises several different scenarios that
cause GDB/GDBserver to error out when it should not.
Tested on x86-64 GNU/Linux with {unix, native-gdbserver,
native-extended-gdbserver}
Note: without the previous fix, the "single-process + continue"
variant of the new test would fail with:
(gdb) PASS: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: switch to parent
continue
Continuing.
Warning:
Could not insert hardware watchpoint 3.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
(gdb) FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue
gdb/gdbserver/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* linux-low.c: Change interface to take the target lwp_info
pointer directly and return void. Handle detaching from a zombie
thread.
(linux_detach_lwp_callback): New function.
(linux_detach): Detach from the leader thread after detaching from
the clone threads.
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* inf-ptrace.c (inf_ptrace_detach_success): New function, factored
out from ...
(inf_ptrace_detach): ... here.
* inf-ptrace.h (inf_ptrace_detach_success): New declaration.
* linux-nat.c (get_pending_status): Rename to ...
(get_detach_signal): ... this, and return a host signal instead of
filling in a wait status.
(detach_one_lwp): New function, factored out from detach_callback
and adjusted to handle detaching from a zombie thread.
(detach_callback): Skip the leader thread.
(linux_nat_detach): No longer defer to inf_ptrace_detach to detach
the leader thread, nor build a signal string to pass down.
Instead, use target_announce_detach, detach_one_lwp and
inf_ptrace_detach_success.
gdb/testsuite/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* gdb.threads/process-dies-while-detaching.c: New file.
* gdb.threads/process-dies-while-detaching.exp: New file.
In AArch64 displaced stepping and fast tracepoint, GDB/GDBserver needs
to check whether the offset can fit in the range. We are using int32_t
for offset, it is sufficient to get an offset from an instruction, but
it is not enough to get an offset from two addresses. For example,
we have a BL in shared lib which is at 0x0000002000040774, and the
scratch pad for displaced stepping is at 0x400698. The offset can't
fit in 28 bit imm. However, since we are using int32_t for offset, GDB
thinks the offset can fit it, and generate the B instruction with wrong
offset.
It fixes the following fail,
-FAIL: gdb.base/dso2dso.exp: next over call to sub2
gdb:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
variable new_offset.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_ftrace_insn_reloc_b): Use int64_t
for variable new_offset.
(aarch64_ftrace_insn_reloc_b_cond): Likewise.
(aarch64_ftrace_insn_reloc_cb): Likewise.
(aarch64_ftrace_insn_reloc_tb): Likewise.
(aarch64_install_fast_tracepoint_jump_pad): Likewise. Use
PRIx64 instead of PRIx32.
When I implement linux_target_ops.get_syscall_trapinfo for aarch64 and arm,
I find the second parameter sysret isn't used at all. In RSP, we don't
need syscall return value either, because GDB can figure out the return
value from registers content got by 'g' packet.
This patch is to remove them.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-low.c (get_syscall_trapinfo): Remove parameter sysret.
Callers updated.
* linux-low.h (struct linux_target_ops) <get_syscall_trapinfo>:
Remove parameter sysno.
* linux-x86-low.c (x86_get_syscall_trapinfo): Remove parameter
sysret.
When a thread is doing step-over with reinsert breakpoint, and the
instruction executed is a syscall doing vfork, both parent and child
share the memory, so the reinsert breakpoint in the space is visible
to both of them. Also, removing the reinsert breakpoints from the
child will effectively remove them from the parent. We should
carefully manipulate reinsert breakpoints for both processes.
What we are doing here is that
- uninsert reinsert breakpoints from the parent before cloning the
breakpoint list. We use "uninsert" instead of "remove", because
we need to "reinsert" them back after vfork is done. In fact,
"uninsert" removes them from both child and parent process space.
- reinsert breakpoints in parent process are still copied to child's
breakpoint list,
- remove them from child's breakpoint list as what we did for fork,
at this point, reinsert breakpoints are removed from the child and
the parent, but they are still tracked by the parent's breakpoint
list,
- once vfork is done, "reinsert" them back to the parent,
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (handle_extended_wait): Call
uninsert_reinsert_breakpoints for the parent process. Remove
reinsert breakpoints from the child process. Reinsert them to
the parent process when vfork is done.
* mem-break.c (uninsert_reinsert_breakpoints): New function.
(reinsert_reinsert_breakpoints): New function.
* mem-break.h (uninsert_reinsert_breakpoints): Declare
(reinsert_reinsert_breakpoints): Declare.
When a thread is stepping over a syscall instruction with software
single step, GDBserver inserts reinsert breakpoints at the next pcs.
If the syscall call is fork, the forked child has reinsert breakpoint
in its space, and GDBserver clones parent's breakpoint list to child's.
When GDBserver resumes the child, its bp_reinsert is zero, but has
reinsert breakpoints, so the following assert is triggered if I apply
the patch extending step-over-syscall.exp.
gdb/gdbserver/linux-low.c:4292: A problem internal to GDBserver has been detected.^M
void linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*): Assertion `!has_reinsert_breakpoints (proc)' failed.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (handle_extended_wait): If the parent is doing
step-over, remove the reinsert breakpoints from the forked child.
This patch fixes a GDBserver crash when one thread is stepping over
a syscall instruction which is exit. Step-over isn't finished due
to the exit, but GDBserver doesn't clean up the state of step-over,
so in the wait next time, GDBserver will wait on step_over_bkpt,
which is already exited, and GDBserver crashes because
'requested_child' is NULL. See gdbserver logs below,
Need step over [LWP 14858]? yes, found breakpoint at 0x2aaaaad91307^M
proceed_all_lwps: found thread 14858 needing a step-over^M
Starting step-over on LWP 14858. Stopping all threads^M
>>>> entering void stop_all_lwps(int, lwp_info*)
....
<<<< exiting void stop_all_lwps(int, lwp_info*)^M
Done stopping all threads for step-over.^M
pc is 0x2aaaaad91307^M
Writing 0f to 0x2aaaaad91307 in process 14858^M
Could not find fast tracepoint jump at 0x2aaaaad91307 in list (uninserting).^M
pending reinsert at 0x2aaaaad91307^M
step from pc 0x2aaaaad91307^M
Resuming lwp 14858 (step, signal 0, stop not expected)^M
# Start step-over for LWP 14858
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
....
LLFE: 14858 exited.
...
<<<< exiting ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
# LWP 14858 exited
.....
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)^M
linux_wait_1: [<all threads>]^M
step_over_bkpt set [LWP 14858.14858], doing a blocking wait
# but step_over_bkpt is still LWP 14858, which is wrong
The fix is to finish step-over if it is ongoing, and unsuspend other
threads. Without the fix in linux-low.c, GDBserver will crash in
with running gdb.base/step-over-exit.exp.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (unsuspend_all_lwps): Declare.
(linux_low_filter_event): If thread exited, call finish_step_over.
If step-over is finished, unsuspend other threads.
gdb/testsuite:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* gdb.base/step-over-exit.c: New.
* gdb.base/step-over-exit.exp: New.
This patch adds more asserts, so the incorrect or sub-optimal
reinsert breakpoints manipulations (from the tests in the following
patches) can trigger them.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Assert
has_reinsert_breakpoints returns false.
* mem-break.c (delete_disabled_breakpoints): Assert
bp type isn't reinsert_breakpoint.
This patch adds some sanity check that reinsert breakpoints must be
there when doing step-over on software single step target. The check
triggers an assert when running forking-threads-plus-breakpoint.exp
on arm-linux target,
gdb/gdbserver/linux-low.c:4714: A problem internal to GDBserver has been detected.^M
int finish_step_over(lwp_info*): Assertion `has_reinsert_breakpoints ()' failed.
the error happens when GDBserver has already resumed a thread of
process A for step-over (and wait for it hitting reinsert breakpoint),
but receives detach request for process B from GDB, which is shown in
the backtrace below,
(gdb) bt
#2 0x000228aa in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4703
#3 0x00025a50 in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4749
#4 complete_ongoing_step_over () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4760
#5 linux_detach (pid=25228) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:1503
#6 0x00012bae in process_serial_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3974
#7 handle_serial_event (err=<optimized out>, client_data=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:4347
#8 0x00016d68 in handle_file_event (event_file_desc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:429
#9 0x000173ea in process_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:184
#10 start_event_loop () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:547
#11 0x0000aa2c in captured_main (argv=<optimized out>, argc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3719
#12 main (argc=<optimized out>, argv=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3804
the sanity check tries to find the reinsert breakpoint from process B,
but nothing is found. It is wrong, we need to search in process A,
since we started step-over of a thread of process A.
(gdb) p lwp->thread->entry.id
$3 = {pid = 25120, lwp = 25131, tid = 0}
(gdb) p current_thread->entry.id
$4 = {pid = 25228, lwp = 25228, tid = 0}
This patch switched current_thread to the thread we are doing step-over
in finish_step_over.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (maybe_hw_step): New function.
(linux_resume_one_lwp_throw): Call maybe_hw_step.
(finish_step_over): Switch current_thread to lwp temporarily,
and assert has_reinsert_breakpoints returns true.
(proceed_one_lwp): Call maybe_hw_step.
* mem-break.c (has_reinsert_breakpoints): New function.
* mem-break.h (has_reinsert_breakpoints): Declare.
gdb/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Return type of
gdb_signal_from_host() is gdb_signal, not an int.
(windows_get_exec_module_filename): Add pointer casts for C++.
gdb/gdbserver/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* win32-low.c (win32_create_inferior): Add pointer casts for C++.
This patch is to replace find_inferior (&all_threads, unsuspend_one_lwp, NULL)
with unsuspend_all_lwps (NULL), which is shorter. They are equivalent
to each other.
gdb/gdbserver:
2016-05-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_stabilize_threads): Call unsuspend_all_lwps
instead of find_inferior.
This patch initialize res to zero, otherwise, it may have some garbage
bits after the *the_target->read_memory call.
gdb/gdbserver:
2016-05-05 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_read_memory_unsigned_integer):
Initialize res to zero.
Variable cpsr holds the value of cpsr register, which is 32-bit. It
is better to explicitly use uint32_t.
gdb/gdbserver:
2016-05-05 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Change type of cpsr
to uint32_t.
ChangeLog:
* spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
(spu_bfd_open): Likewise.
gdbserver/ChangeLog:
* spu-low.c (fetch_ppc_register): Cast PowerPC-Linux-specific value
used as first ptrace argument to PTRACE_TYPE_ARG1 for C++.
(fetch_ppc_memory_1, store_ppc_memory_1): Likewise.
I am sending this fix on behalf of Par Olsson, as a follow-up of this
one:
https://www.sourceware.org/ml/gdb-patches/2015-10/msg00196.html
This problem is exposed when enabling/disabling fast tracepoints on big
endian machines. The flag is defined as an int8_t, but is written from
gdbserver as an integer (usually 32 bits). When the agent code reads it
as an int8_t, it only considers the most significant byte, which is
always 0.
Also, we were writing 32 bits in an 8 bits field, so the write would
overflow, but since the following bytes are padding (the next field is
an uint64_t), it luckily didn't cause any issue on little endian
systems.
The fix was originally tested on ARM big endian systems, but I don't
have access to such a system. However, thanks to Marcin's PowerPC fast
tracepoint patches and gcc110 (big endian Power7) on the gcc compile
farm, I was able to reproduce the problem, test the fix and write a
test (the following patch).
gdb/gdbserver/ChangeLog:
YYYY-MM-DD Par Olsson <par.olsson@windriver.com>
* tracepoint.c (write_inferior_int8): New function.
(cmd_qtenable_disable): Write enable flag using
write_inferior_int8.
Hi,
I happen to see that field need_step_over in struct lwp_info is only
used to print a debug info. need_step_over is set in linux_wait_1
when breakpoint_here is true, however, we check breakpoint_here too in
need_step_over_p and do the step over. I think we don't need field
need_step_over, and check breakpoint_here directly in need_step_over_p.
This field was added in this patch
https://sourceware.org/ml/gdb-patches/2010-03/msg00605.html and the code
wasn't changed much since then.
This patch is to remove it.
gdb/gdbserver:
2016-04-28 Yao Qi <yao.qi@linaro.org>
* linux-low.h (struct lwp_info) <need_step_over>: Remove.
* linux-low.c (linux_wait_1): Update.
(need_step_over_p): Likewise.
When GDBserver steps over a breakpoint using software single step, it
enqueues the signal, single step and deliver the signal in the next
resume if step over is not needed. In this way, the program won't
receive the signal if the conditional breakpoint is set a branch to
self instruction, because the step over is always needed.
This patch removes the restriction that don't deliver the signal to
the inferior if we are trying to reinsert a breakpoint for software
single step and change the decision on resume vs. step-over when the
LWP has pending signals to deliver.
gdb/gdbserver:
2016-04-25 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): Adjust.
(need_step_over_p): Return zero if the LWP has pending signals
can be delivered on software single step target.
GDBserver steps over a breakpoint while the single step breakpoint
is inserted at the same address, there are two breakpoint objects
using single raw breakpoint, which is inserted (for single step).
When step over is finished, GDBserver reinsert the breakpoint, but
it finds the raw breakpoint is already inserted, and error out
"Breakpoint already inserted at reinsert time." Even if I change the
order to delete reinsert breakpoints first (which only decreases the
refcount, but leave inserted flag unchanged), the error is still
there.
The fix is to remove the error and return instead.
gdb/gdbserver:
2016-04-25 Yao Qi <yao.qi@linaro.org>
* linux-low.c (reinsert_raw_breakpoint): If bp->inserted is true
return instead of error.
When GDBserver inserts a breakpoint, it looks for raw breakpoint, if
the raw breakpoint is found, increase its refcount, and return. This
doesn't work when it steps over a breakpoint using software single
step and the underneath instruction of breakpoint is branch to self.
When stepping over a breakpoint on ADDR using software single step,
GDBserver uninsert the breakpoint, so the corresponding raw breakpoint
RAW's 'inserted' flag is zero. Then, GDBserver insert single step
breakpoint at the same address ADDR because the instruction is branch
to self, the same raw brekapoint RAW is found, and increase the
refcount. However, the raw breakpoint is not inserted, and the
program won't stop.
gdb/gdbserver:
2016-04-25 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
object. Insert it if it is not inserted yet. Increase the
refcount and link it into the proc's raw breakpoint list.
Bits 20 ~ 23 of CPSR are reserved (RAZ, read as zero), but they are not
zero if the arm program runs on aarch64-linux. AArch64 tracer gets PSTATE
from arm 32-bit tracee as CPSR, but bits 20 ~ 23 are used in PSTATE. I
think kernel should clear these bits when it is read through ptrace, but
the fix in user space is still needed.
This patch fixes these two fails,
-FAIL: gdb.reverse/insn-reverse.exp: ext_reg_push_pop: compare registers on insn 0:vldr d7, [r11, #-12]
-FAIL: gdb.reverse/insn-reverse.exp: ext_reg_push_pop: compare registers on insn 0:vldr d7, [r7]
gdb:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
bits 20 to 23.
gdb/gdbserver:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (arm_store_gregset): Clear CPSR bits 20
to 23.
Simple exchange of mpx-avx for avx-mpx.
Other occurrences were not found.
2016-04-22 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* configure.srv (srv_amd64_xmlfiles): Exchange
i386/amd64-mpx-avx.xml for i386/amd64-avx-mpx.xml.
GDBserver doesn't deliver signal when stepping over a breakpoint even
hardware single step is used. When GDBserver started to step over
(thread creation) breakpoint for mutlit-threaded debugging in 2002 [1],
GDBserver behaves this way.
This behavior gets trouble on conditional breakpoints on branch to
self instruction like this,
0x00000000004005b6 <+29>: jmp 0x4005b6 <main+29>
and I set breakpoint
$(gdb) break branch-to-self.c:43 if counter > 3
and the variable counter will be set to 5 in SIGALRM signal handler.
Since GDBserver keeps stepping over breakpoint, the SIGALRM can never
be dequeued and delivered to the inferior, so the program can't stop.
The test can be found in gdb.base/branch-to-self.exp.
GDBserver didn't deliver signal when stepping over a breakpoint because
a tracepoint is collected twice if GDBserver does so in the following
scenario, which can be reproduced by gdb.trace/signal.exp.
- program stops at tracepoint, and tracepoint is collected,
- gdbserver starts a step-over,
- a signal arrives, step-over is canceled, and signal should be passed,
- gdbserver starts a new step-over again, pass the signal as well,
- program stops at the entry of signal handler, step-over finished,
- gdbserver proceeds,
- program returns from the signal handler, again to the tracepoint,
and thus is collected again.
The spurious collection isn't that harmful, IMO, so it should be OK
to let GDBserver deliver signal when stepping over a breakpoint.
gdb/gdbserver:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): Don't deliver
signal when stepping over breakpoint with software single
step.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.trace/signal.exp: Also pass if
$tracepoint_hits($i) > $iterations.
Now that gdb/gdbserver compile as C++ programs by default, the s390
GNU/Linux build started failing with:
In file included from ../../src/gdb/common/common-defs.h:64:0,
from ../../src/gdb/defs.h:28,
from ../../src/gdb/s390-linux-nat.c:22:
../../src/gdb/s390-linux-nat.c: In function ‘void fetch_regset(regcache*, int, int, int, const regset*)’:
../../src/gdb/../include/libiberty.h:711:38: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
# define alloca(x) __builtin_alloca(x)
^
../../src/gdb/s390-linux-nat.c:297:19: note: in expansion of macro ‘alloca’
gdb_byte *buf = alloca (regsize);
^
etc.
gdb/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
void * instead of gdb_byte *.
gdb/gdbserver/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* linux-s390-low.c (s390_collect_ptrace_register)
(s390_supply_ptrace_register, s390_get_hwcap): Use gdb_byte * and
add casts.
(s390_check_regset): Use void * instead of gdb_byte *.
This makes --enable-build-with-cxx be "yes" by default.
One must now configure with --enable-build-with-cxx=no in order to
build with a C compiler.
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
* configure: Renegerate.
gdb/gdbserver/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* configure: Renegerate.
This patch moves macro ARM_CPSR_GREGNUM to arch/arm-linux.h so that it
can be used in GDBserver side.
gdb:
2016-04-20 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
* arch/arm-linux.h: ... here.
gdb/gdbserver:
2016-04-20 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c: Include "arch/arm-linux.h".
(arm_fill_gregset): Use ARM_CPSR_GREGNUM rather than magic
number 16.
(arm_store_gregset): Likewise.
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
New include.
(amd64_linux_core_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
* amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
(amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
* common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
(X86_XSTATE_AVX_MPX_MASK): New case.
* features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
(i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
(i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
(i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
New expedites.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
include.
(i386_linux_core_read_description): Add case
X86_XSTATE_AVX_MPX_MASK.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_mpx_linux.
* i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
* i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
(i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
* x86-linux-nat.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
* features/i386/amd64-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx-linux.c: Generated.
* features/i386/amd64-avx-mpx.c: Generated.
* features/i386/i386-avx-mpx-linux.c: Generated.
* features/i386/i386-avx-mpx.c: Generated.
* regformats/i386/amd64-avx-mpx-linux.dat: Generated.
* regformats/i386/amd64-avx-mpx.dat: Generated.
* regformats/i386/i386-avx-mpx-linux.dat: Generated.
* regformats/i386/i386-avx-mpx.dat: Generated.
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Add removal for i386-avx-mpx.c,
i386-avx-mpx-linux.c, amd64-avx-mpx.c and amd64-avx-mpx-linux.c.
(i386-avx-mpx.c, i386-avx-mpx-linux.c, amd64-avx-mpx.c)
(amd64-avx-mpx-linux.c): New rules.
(amd64-avx-mpx-linux-ipa.o, i386-avx-mpx-linux-ipa.o): New rule.
* configure.srv (srv_i386_regobj): Add i386-avx-mpx.o.
(srv_i386_linux_regobj): Add i386-avx-mpx-linux.o.
(srv_amd64_regobj): Add amd64-avx-mpx.o.
(srv_amd64_linux_regobj): Add amd64-avx-mpx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-avx-mpx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx-mpx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-mpx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-mpx-linux.xml.
(ipa_i386_linux_regobj): Add i386-avx-mpx-linux-ipa.o.
(ipa_amd64_linux_regobj): Add amd64-avx-mpx-linux-ipa.o.
* linux-x86-low.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(x86_get_ipa_tdesc_idx): Add cases for avx_mpx.
(initialize_low_arch): Call init_registers_amd64_avx_mpx_linux and
init_registers_i386_avx_mpx_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_i386_avx_mpx_linux.
* linux-amd64-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_amd64_avx_mpx_linux.
* linux-x86-tdesc.h (X86_TDESC_AVX_MPX): New enum value.
(init_registers_amd64_avx_mpx_linux, tdesc_amd64_avx_mpx_linux)
(init_registers_i386_avx_mpx_linux, tdesc_i386_avx_mpx_linux): New
declarations.
The ptrace args/return types detection doesn't work properly in C++
mode, on non-GNU/Linux hosts. For example, on gcc70 (NetBSD 5.1),
where the prototype is:
int ptrace(int, __pid_t, void*, int);
configure misdetects it as:
$ grep PTRACE_TYPE config.h
#define PTRACE_TYPE_ARG1 int
#define PTRACE_TYPE_ARG3 int *
#define PTRACE_TYPE_ARG4 int
/* #undef PTRACE_TYPE_ARG5 */
#define PTRACE_TYPE_RET int
resulting in:
../../src/gdb/amd64bsd-nat.c: In function 'void amd64bsd_fetch_inferior_registers(target_ops*, regcache*, int)':
../../src/gdb/amd64bsd-nat.c:56: warning: dereferencing type-punned pointer will break strict-aliasing rules
../../src/gdb/amd64bsd-nat.c: In function 'void amd64bsd_store_inferior_registers(target_ops*, regcache*, int)':
../../src/gdb/amd64bsd-nat.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules
../../src/gdb/amd64bsd-nat.c:110: warning: dereferencing type-punned pointer will break strict-aliasing rules
We could address this [1], however despite ptrace.m4's claim:
# Needs to be tested in C++ mode, to detect whether we need to cast
# the first argument to enum __ptrace_request.
it appears that there's actually no need to test in C++ mode. Always
running the ptrace tests in C mode works just the same on GNU/Linux.
I remember experimenting with several different ways to handle the
original issue back then, and maybe that was needed in some other
attempt and then I didn't realize it ended up not really necessary.
Confirmed that this fixes the NetBSD 5.1 C++ build, and confirmed that
C and C++ builds on Fedora 23 are unaffected.
[1] - https://sourceware.org/ml/gdb-patches/2016-04/msg00374.html
gdb/ChangeLog:
2016-04-18 Pedro Alves <palves@redhat.com>
* ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-04-18 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
This patch fixes the following failure:
FAIL: gdb.trace/trace-condition.exp: ftrace: -(21 << 1) == -42: check 10
frames were collected.
This was due to aarch64_emit_sub using the wrong order in its operands, so the
operation would end up being 42 - 0 rather than 0 - 42.
This patch also fixes the order of aarch64_emit_add for clarity.
The test case for emit_sub is fixed so that the proper order of
the operands is needed for the test to pass.
Tested on aarch64-native-extended-gdbserver.
Note: trace-condition.exp was broken a bit so I had to modify it to run
the test. A fix is coming for that in another patch.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_emit_add): Switch x1 and x0.
(aarch64_emit_sub): Likewise.
gdb/testsuite/ChangeLog:
* gdb.trace/trace-condition.exp (foreach): Fix emit_sub testcase.
When we build a shared library for testing, it is built differently
whether it is meant for the local system or a remote one. When it is
for the local system, the library is built with no SONAME. So when the
executable is built, roughly in this way:
$ gcc testfile.c /path/to/library.so
the executable will contain an absolute reference to the library. For
example:
$ readelf -a testsuite/gdb.python/py-shared | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.python/py-shared-sl.sl]
When testing is done remotely, the absolute path obviously doesn't work.
Therefore, we build the library with an SONAME:
$ readelf -a testsuite/gdb.python/py-shared-sl.sl | grep SONAME
0x000000000000000e (SONAME) Library soname: [py-shared-sl.sl]
which ends up in the executable's NEEDED field:
$ readelf -a testsuite/gdb.python/py-shared | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [py-shared-sl.sl]
The executable and the library are then uploaded side-by-side on the
remote system. To allow the dynamic linker to find the shared library,
we have to add the special RPATH value $ORIGIN, which tells it to search
in the executable's directory:
$ readelf -a testsuite/gdb.python/py-shared | grep ORIGIN
0x000000000000000f (RPATH) Library rpath: [$ORIGIN]
The problem with the IPA library is that it doesn't have an SONAME,
making it very difficult to do testing on a remote board. When a
test executable is linked with it, it contains an absolute reference to
the library path. Therefore, unless the paths on the target are the
same as on the build system, it won't work.
To make it possible for tests using the IPA library to run test on
remote boards, I suggest adding an SONAME to libinproctrace.so. I don't
think it should be a big problem for users. All the libraries installed
on my system have an SONAME, so it should be fine if libinproctrace.so
does too.
As a consequence, native testing does not work anymore, since
executables do not contain the absolute path to the library anymore. To
keep them working, we can have gdb_load_shlibs copy the library to the
test directory when testing natively. That's done by modifying
gdb_load_shlibs. We also have to add RPATH=$ORIGIN to executables, even
when testing natively.
I think it's a good change in general, as it reduces the differences
between testing a native and a remote target. To further reduce those
differences, we can also always build test shared libraries with an
SONAME.
ftrace.exp and ftrace-lock.exp need to be modified slightly. The code
checks that the IPA library is loaded using the absolute path on the
build machine. That obviously doesn't work if the test is done
remotely, as the path will be different. I changed the tests to only
search for the library basename (e.g. libinproctrace.so).
gdb/gdbserver/ChangeLog:
* Makefile.in ($(IPA_LIB)): Set SONAME of the IPA lib.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace-lock.exp: Check for IPA basename instead of
absolute.
* gdb.trace/ftrace.exp: Likewise.
* lib/gdb.exp (gdb_compile): Set rpath $ORIGIN for non-remote
targets as well.
(gdb_compile_shlib): Set SONAME for non-remote targets as well.
(gdb_load_shlibs): Copy libraries to test directory when testing
natively. Only set solib-search-path if testing remotely.
* lib/mi-support.exp (mi_load_shlibs): Likewise.
The getauxval code was wrongly included in code area only compiled for
gdbserver. Move it to a #ifdef IN_PROCESS_AGENT area that already
contains lots of IPA-only code.
gdb/gdbserver/ChangeLog:
* tracepoint.c (getauxval): Move to #ifdef IN_PROCESS_AGENT.
These files need AT_PHDR, which is defined in elf.h. If HAVE_GETAUXVAL
is set, it's implicitely included by sys/auxv.h. Include it manually
for the opposite case.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <elf.h> include.
* linux-ppc-ipa.c: Add <elf.h> include.
* linux-s390-ipa.c: Add <elf.h> include.
These were introduced by 1cda151268
and a13c46966d . One is a simple
missing cast, the other is const usage on global function pointers
exported from IPA: in C++, consts are static, and thus won't be
exported from the DSO (the build error was because of non-applicable
visibility("default")).
gdb/gdbserver/ChangeLog:
* tracepoint.c (gdb_collect_ptr): Remove const qualifier.
(get_raw_reg_ptr): Likewise.
(get_trace_state_variable_value_ptr): Likewise.
(set_trace_state_variable_value_ptr): Likewise.
(initialize_tracepoint): Cast alloc_jump_pad_buffer result to
char *.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* linux-ppc-low.c (emit_insns): New function.
(__EMIT_ASM, _EMIT_ASM, EMIT_ASM): New macros.
(ppc_emit_prologue): New function.
(ppc_emit_epilogue): New function.
(ppc_emit_add): New function.
(ppc_emit_sub): New function.
(ppc_emit_mul): New function.
(ppc_emit_lsh): New function.
(ppc_emit_rsh_signed): New function.
(ppc_emit_rsh_unsigned): New function.
(ppc_emit_ext): New function.
(ppc_emit_zero_ext): New function.
(ppc_emit_log_not): New function.
(ppc_emit_bit_and): New function.
(ppc_emit_bit_or): New function.
(ppc_emit_bit_xor): New function.
(ppc_emit_bit_not): New function.
(ppc_emit_equal): New function.
(ppc_emit_less_signed): New function.
(ppc_emit_less_unsigned): New function.
(ppc_emit_ref): New function.
(ppc_emit_const): New function.
(ppc_emit_reg): New function.
(ppc_emit_pop): New function.
(ppc_emit_stack_flush): New function.
(ppc_emit_swap): New function.
(ppc_emit_stack_adjust): New function.
(ppc_emit_call): New function.
(ppc_emit_int_call_1): New function.
(ppc_emit_void_call_2): New function.
(ppc_emit_if_goto): New function.
(ppc_emit_goto): New function.
(ppc_emit_eq_goto): New function.
(ppc_emit_ne_goto): New function.
(ppc_emit_lt_goto): New function.
(ppc_emit_le_goto): New function.
(ppc_emit_gt_goto): New function.
(ppc_emit_ge_goto): New function.
(ppc_write_goto_address): New function.
(ppc_emit_ops_impl): New static variable.
(ppc64v1_emit_prologue): New function.
(ppc64v2_emit_prologue): New function.
(ppc64_emit_epilogue): New function.
(ppc64_emit_add): New function.
(ppc64_emit_sub): New function.
(ppc64_emit_mul): New function.
(ppc64_emit_lsh): New function.
(ppc64_emit_rsh_signed): New function.
(ppc64_emit_rsh_unsigned): New function.
(ppc64_emit_ext): New function.
(ppc64_emit_zero_ext): New function.
(ppc64_emit_log_not): New function.
(ppc64_emit_bit_and): New function.
(ppc64_emit_bit_or): New function.
(ppc64_emit_bit_xor): New function.
(ppc64_emit_bit_not): New function.
(ppc64_emit_equal): New function.
(ppc64_emit_less_signed): New function.
(ppc64_emit_less_unsigned): New function.
(ppc64_emit_ref): New function.
(ppc64_emit_const): New function.
(ppc64v1_emit_reg): New function.
(ppc64v2_emit_reg): New function.
(ppc64_emit_pop): New function.
(ppc64_emit_stack_flush): New function.
(ppc64_emit_swap): New function.
(ppc64v1_emit_call): New function.
(ppc64v2_emit_call): New function.
(ppc64v1_emit_int_call_1): New function.
(ppc64v2_emit_int_call_1): New function.
(ppc64v1_emit_void_call_2): New function.
(ppc64v2_emit_void_call_2): New function.
(ppc64_emit_if_goto): New function.
(ppc64_emit_eq_goto): New function.
(ppc64_emit_ne_goto): New function.
(ppc64_emit_lt_goto): New function.
(ppc64_emit_le_goto): New function.
(ppc64_emit_gt_goto): New function.
(ppc64_emit_ge_goto): New function.
(ppc64v1_emit_ops_impl): New static variable.
(ppc64v2_emit_ops_impl): New static variable.
(ppc_emit_ops): New function.
(linux_low_target): Wire in ppc_emit_ops.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* Makefile.in: Add powerpc-*-ipa.o
* configure.srv: Add ipa_obj for powerpc*-linux.
* linux-ppc-ipa.c: New file.
* linux-ppc-low.c: Added linux-ppc-tdesc.h, ax.h, tracepoint.h
includes.
(PPC_FIELD): New macro.
(PPC_SEXT): New macro.
(PPC_OP6): New macro.
(PPC_BO): New macro.
(PPC_LI): New macro.
(PPC_BD): New macro.
(init_registers_*): Move prototype to linux-ppc-tdesc.h.
(tdesc_*): Move declaration to linux-ppc-tdesc.h.
(ppc_get_hwcap): Rename to ppc_get_auxv and add type parameter.
(ppc_get_thread_area): New function.
(is_elfv2_inferior): New function.
(gen_ds_form): New function.
(GEN_STD): New macro.
(GEN_STDU): New macro.
(GEN_LD): New macro.
(GEN_LDU): New macro.
(gen_d_form): New function.
(GEN_ADDI): New macro.
(GEN_ADDIS): New macro.
(GEN_LI): New macro.
(GEN_LIS): New macro.
(GEN_ORI): New macro.
(GEN_ORIS): New macro.
(GEN_LWZ): New macro.
(GEN_STW): New macro.
(GEN_STWU): New macro.
(gen_xfx_form): New function.
(GEN_MFSPR): New macro.
(GEN_MTSPR): New macro.
(GEN_MFCR): New macro.
(GEN_MTCR): New macro.
(GEN_SYNC): New macro.
(GEN_LWSYNC): New macro.
(gen_x_form): New function.
(GEN_OR): New macro.
(GEN_MR): New macro.
(GEN_LWARX): New macro.
(GEN_STWCX): New macro.
(GEN_CMPW): New macro.
(gen_md_form): New function.
(GEN_RLDICL): New macro.
(GEN_RLDICR): New macro.
(gen_i_form): New function.
(GEN_B): New macro.
(GEN_BL): New macro.
(gen_b_form): New function.
(GEN_BNE): New macro.
(GEN_LOAD): New macro.
(GEN_STORE): New macro.
(gen_limm): New function.
(gen_atomic_xchg): New function.
(gen_call): New function.
(ppc_relocate_instruction): New function.
(ppc_install_fast_tracepoint_jump_pad): New function.
(ppc_get_min_fast_tracepoint_insn_len): New function.
(ppc_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in the new functions.
(initialize_low_arch) [!__powerpc64__]: Don'it initialize 64-bit
tdescs.
* linux-ppc-tdesc.h: New file.
Targets may have various requirements on the required location of the jump
pad area. Currently IPA allocates it at the lowest possible address,
so that it is reachable by branches from the executable. However, this
fails on powerpc, which has executable link address (0x10000000) much
larger than branch reach (+/- 32MiB).
This makes jump pad buffer allocation a target hook instead. The current
implementations are as follows:
- i386 and s390: Branches can reach anywhere, so just mmap it. This
avoids the linear search dance.
- x86_64: Branches have +/-2GiB of reach, and executable is loaded low,
so just call mmap with MAP_32BIT. Likewise avoids the linear search.
- aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB.
Do a linear search from 4MiB-size downwards to page_size.
- s390x: Branches have +-4GiB of reach, executable loaded at 2GiB.
Do like on aarch64.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* linux-amd64-ipa.c: Add <sys/mman.h> include.
(alloc_jump_pad_buffer): New function.
* linux-i386-ipa.c (alloc_jump_pad_buffer): New function.
* linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function.
(initialize_tracepoint): Delegate to alloc_jump_pad_buffer.
* tracepoint.h (alloc_jump_pad_buffer): New prototype.
(getauxval) [!HAVE_GETAUXVAL]: New prototype.
On powerpc64, qSymbol for a function returns the function code address,
and not the descriptor address. Since we emit code calling gdb_collect
and some other functions, we need the descriptor (no way to know the
proper TOC address without it). To get the descriptor address, make
global function pointer variables in the IPA pointing to the relevant
functions and read them instead of asking for them directly via qSymbol.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Rename gdb_agent_get_raw_reg to get_raw_reg.
* linux-amd64-ipa.c: Likewise.
* linux-i386-ipa.c: Likewise.
* linux-s390-ipa.c: Likewise.
* tracepoint.c: IPA-export gdb_collect_ptr instead of gdb_collect,
ditto for get_raw_reg_ptr, get_trace_state_variable_value_ptr,
set_trace_state_variable_value_ptr.
(struct ipa_sym_addresses): Likewise.
(symbol_list): Likewise.
(install_fast_tracepoint): Dereference gdb_collect_ptr instead of
accessing gdb_collect directly.
(gdb_collect_ptr_type): New typedef.
(get_raw_reg_ptr_type): New typedef.
(get_trace_state_variable_value_ptr_type): New typedef.
(set_trace_state_variable_value_ptr_type): New typedef.
(gdb_collect_ptr): New global.
(get_raw_reg_ptr): New global.
(get_trace_state_variable_value_ptr): New global.
(set_trace_state_variable_value_ptr): New global.
(get_raw_reg_func_addr): Dereference get_raw_reg_ptr instead of
accessing get_raw_reg directly.
(get_get_tsv_func_addr): Likewise for
get_trace_state_variable_value_ptr.
(get_set_tsv_func_addr): Likewise for
set_trace_state_variable_value_ptr.
* tracepoint.h: Rename gdb_agent_get_raw_reg to get_raw_reg.
On powerpc64, qSymbol query may require gdb to read a function
descriptor, sending a vFile packet to gdbserver. Thus, we need
to handle 'v' packet in look_up_one_symbol.
vFile replies may be quite long, and require reallocating own_buf.
Since handle_v_requests assumes the buffer is the static global own_buf
from server.c and reallocates it, we need to make own_buf global and
use it from look_up_one_symbol instead of using our own auto variable.
I've also done the same change in relocate_instruction, just in case.
On gdb side, in remote_check_symbols, rs->buf may be clobbered by vFile
handling, yet we need its contents for the reply (the symbol name is
stored there). Allocate a new buffer instead.
This broke fast tracepoints on powerpc64, due to errors in reading IPA
symbols.
gdb/ChangeLog:
* remote.c (remote_check_symbols): Allocate own buffer for reply.
gdbserver/ChangeLog:
* remote-utils.c (look_up_one_symbol): Remove own_buf, handle 'v'
packets.
(relocate_instruction): Remove own_buf.
* server.c (own_buf): Make global.
(handle_v_requests): Make global.
* server.h (own_buf): New declaration.
(handle_v_requests): New prototype.
These sequences assume a z900+ CPU, like the rest of fast tracepoint
support.
gdb/gdbserver/ChangeLog:
PR 18377
* linux-s390-low.c (add_insns): New function.
(s390_emit_prologue): New function.
(s390_emit_epilogue): New function.
(s390_emit_add): New function.
(s390_emit_sub): New function.
(s390_emit_mul): New function.
(s390_emit_lsh): New function.
(s390_emit_rsh_signed): New function.
(s390_emit_rsh_unsigned): New function.
(s390_emit_ext): New function.
(s390_emit_log_not): New function.
(s390_emit_bit_and): New function.
(s390_emit_bit_or): New function.
(s390_emit_bit_xor): New function.
(s390_emit_bit_not): New function.
(s390_emit_equal): New function.
(s390_emit_less_signed): New function.
(s390_emit_less_unsigned): New function.
(s390_emit_ref): New function.
(s390_emit_if_goto): New function.
(s390_emit_goto): New function.
(s390_write_goto_address): New function.
(s390_emit_litpool): New function.
(s390_emit_const): New function.
(s390_emit_call): New function.
(s390_emit_reg): New function.
(s390_emit_pop): New function.
(s390_emit_stack_flush): New function.
(s390_emit_zero_ext): New function.
(s390_emit_swap): New function.
(s390_emit_stack_adjust): New function.
(s390_emit_set_r2): New function.
(s390_emit_int_call_1): New function.
(s390_emit_void_call_2): New function.
(s390_emit_eq_goto): New function.
(s390_emit_ne_goto): New function.
(s390_emit_lt_goto): New function.
(s390_emit_le_goto): New function.
(s390_emit_gt_goto): New function.
(s390_emit_ge_goto): New function.
(s390x_emit_prologue): New function.
(s390x_emit_epilogue): New function.
(s390x_emit_add): New function.
(s390x_emit_sub): New function.
(s390x_emit_mul): New function.
(s390x_emit_lsh): New function.
(s390x_emit_rsh_signed): New function.
(s390x_emit_rsh_unsigned): New function.
(s390x_emit_ext): New function.
(s390x_emit_log_not): New function.
(s390x_emit_bit_and): New function.
(s390x_emit_bit_or): New function.
(s390x_emit_bit_xor): New function.
(s390x_emit_bit_not): New function.
(s390x_emit_equal): New function.
(s390x_emit_less_signed): New function.
(s390x_emit_less_unsigned): New function.
(s390x_emit_ref): New function.
(s390x_emit_if_goto): New function.
(s390x_emit_const): New function.
(s390x_emit_call): New function.
(s390x_emit_reg): New function.
(s390x_emit_pop): New function.
(s390x_emit_stack_flush): New function.
(s390x_emit_zero_ext): New function.
(s390x_emit_swap): New function.
(s390x_emit_stack_adjust): New function.
(s390x_emit_int_call_1): New function.
(s390x_emit_void_call_2): New function.
(s390x_emit_eq_goto): New function.
(s390x_emit_ne_goto): New function.
(s390x_emit_lt_goto): New function.
(s390x_emit_le_goto): New function.
(s390x_emit_gt_goto): New function.
(s390x_emit_ge_goto): New function.
(s390_emit_ops): New function.
(struct linux_target_ops): Fill in emit_ops hook.
Fast tracepoints will only work on 6-byte intructions, and assume at least
a z900 CPU. s390 also has 4-byte jump instructions, which also work on
pre-z900, but their range is limitted to +-64kiB, which is not very useful
(and wouldn't work at all with current jump pad allocation).
There's a little problem with s390_relocate_instruction function: it
converts BRAS/BRASL instructions to LARL of the return address + JG
to the target address. On 31-bit, this sets the high bit of the target
register to 0, while BRAS/BRASL would set it to 1. While this is not
a problem when the result is only used to address memory, it could
possibly break something that expects to compare such addresses for
equality without first masking the bit off. In particular, I'm not sure
whether leaving the return address high bit unset is ABI-compliant
(could confuse some unwinder?). If that's a problem, it could be fixed
by handling it in the jump pad (since at that point we can just modify
the GPRs in the save area without having to worry about preserving
CCs and only having that one GPR to work with - I'm not sure if it's
even possible to set the high bit with such constraints).
gdb/gdbserver/ChangeLog:
PR 18377
* Makefile.in: Add s390 IPA files.
* configure.srv: Build IPA for s390.
* linux-s390-ipa.c: New file.
* linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h.
(init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h.
(tdesc_s390_linux32): Likewise.
(init_registers_s390_linux32v1): Likewise.
(tdesc_s390_linux32v1): Likewise.
(init_registers_s390_linux32v2): Likewise.
(tdesc_s390_linux32v2): Likewise.
(init_registers_s390_linux64): Likewise.
(tdesc_s390_linux64): Likewise.
(init_registers_s390_linux64v1): Likewise.
(tdesc_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(tdesc_s390_linux64v2): Likewise.
(init_registers_s390_te_linux64): Likewise.
(tdesc_s390_te_linux64): Likewise.
(init_registers_s390_vx_linux64): Likewise.
(tdesc_s390_vx_linux64): Likewise.
(init_registers_s390_tevx_linux64): Likewise.
(tdesc_s390_tevx_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(tdesc_s390x_linux64v2): Likewise.
(init_registers_s390x_te_linux64): Likewise.
(tdesc_s390x_te_linux64): Likewise.
(init_registers_s390x_vx_linux64): Likewise.
(tdesc_s390x_vx_linux64): Likewise.
(init_registers_s390x_tevx_linux64): Likewise.
(tdesc_s390x_tevx_linux64): Likewise.
(have_hwcap_s390_vx): New static variable.
(s390_arch_setup): Fill have_hwcap_s390_vx.
(s390_get_thread_area): New function.
(s390_ft_entry_gpr_esa): New const.
(s390_ft_entry_gpr_zarch): New const.
(s390_ft_entry_misc): New const.
(s390_ft_entry_fr): New const.
(s390_ft_entry_vr): New const.
(s390_ft_main_31): New const.
(s390_ft_main_64): New const.
(s390_ft_exit_fr): New const.
(s390_ft_exit_vr): New const.
(s390_ft_exit_misc): New const.
(s390_ft_exit_gpr_esa): New const.
(s390_ft_exit_gpr_zarch): New const.
(append_insns): New function.
(s390_relocate_instruction): New function.
(s390_install_fast_tracepoint_jump_pad): New function.
(s390_get_min_fast_tracepoint_insn_len): New function.
(s390_get_ipa_tdesc_idx): New function.
(struct linux_target_ops): Wire in the above functions.
(initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs.
* linux-s390-tdesc.h: New file.
Also adds s390 support to gdb.trace testsuite.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_tracepoints): New function.
(struct linux_target_ops): Fill supports_tracepoints hook.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for s390.
* gdb.trace/mi-trace-frame-collected.exp: Expect 4 registers on s390.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for s390, add gpr0num
variable for GPR 0 instead of assuming it is register 0.
* gdb.trace/trace-common.h: Add s390 fast tracepoint placeholder.
* lib/trace-support.exp: Add s390 registers.
The enqueue and dequeue signals in linux_resume_one_lwp_throw use one
condition and its inverted one. This patch is to move the condition
into a function lwp_signal_can_be_delivered, so that the next patch can
change the condition in one place.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): New function.
(linux_resume_one_lwp_throw): Use lwp_signal_can_be_delivered.
Today, we enqueue signal in linux_resume_one_lwp_throw, but set
variable 'signal' many lines below with the comment
/* Postpone any pending signal. It was enqueued above. */
signal = 0;
I feel difficult to associate code across many lines, and we should
move the code close to enqueue_pending_signal call. This is what
this patch does in general. After this change, variable 'signal'
is set to zero very early, so the 'signal' value in the following
debugging message makes no sense, so I remove it from the debugging
message. The function returns early if lwp->status_pending_p is
true, so 'signal' value in the debugging message doesn't matter,
AFAICS. Also, I move one debugging message several lines below to
make it close the real ptrace call,
if (debug_threads)
debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
lwpid_of (thread), step ? "step" : "continue", signal,
lwp->stop_expected ? "expected" : "not expected");
so that the debugging message can reflect what GDBserver does. This
is a code refactor and only debugging messages are affected.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Set 'signal' to
0 if signal is enqueued. Remove 'signal' from one debugging
message. Move one debugging message to some lines below.
Remove code setting 'signal' to 0.
WIFSTOPPED is checked linux_wstatus_maybe_breakpoint, so WIFSTOPPED
in "WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat)"
is redundant. This patch removes WIFSTOPPED check.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_low_filter_event): Remove redundant
WIFSTOPPED check together with linux_wstatus_maybe_breakpoint.
gdb/gdbserver/ChangeLog:
* linux-ppc-low.c (ppc_supports_tracepoints): New function.
(struct linux_target_ops): Wire in the above.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for ppc.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for ppc.
* gdb.trace/pending.exp: Accept leading dot before function name.
* gdb.trace/trace-common.h: Add fast tracepoint dummy insn for ppc.
* lib/trace-support.exp: Set registers for ppc.
I happen to see that comments to start_step_over isn't in sync with
code, so this patch is to update the comments.
gdb/gdbserver:
2016-03-03 Yao Qi <yao.qi@linaro.org>
* linux-low.c: Update comments to start_step_over.
I see the following GDBserver internal error in two cases,
gdb/gdbserver/linux-low.c:1922: A problem internal to GDBserver has been detected.
unsuspend LWP 17200, suspended=-1
1. step over a breakpoint on fork/vfork syscall instruction,
2. step over a breakpoint on clone syscall instruction and child
threads hits a breakpoint,
the stack backtrace is
#0 internal_error (file=file@entry=0x44c4c0 "gdb/gdbserver/linux-low.c", line=line@entry=1922,
fmt=fmt@entry=0x44c7d0 "unsuspend LWP %ld, suspended=%d\n") at gdb/gdbserver/../common/errors.c:51
#1 0x0000000000424014 in lwp_suspended_decr (lwp=<optimised out>, lwp=<optimised out>) at gdb/gdbserver/linux-low.c:1922
#2 0x000000000042403a in unsuspend_one_lwp (entry=<optimised out>, except=0x66e8c0) at gdb/gdbserver/linux-low.c:2885
#3 0x0000000000405f45 in find_inferior (list=<optimised out>, func=func@entry=0x424020 <unsuspend_one_lwp>, arg=arg@entry=0x66e8c0)
at gdb/gdbserver/inferiors.c:243
#4 0x00000000004297de in unsuspend_all_lwps (except=0x66e8c0) at gdb/gdbserver/linux-low.c:2895
#5 linux_wait_1 (ptid=..., ourstatus=ourstatus@entry=0x665ec0 <last_status>, target_options=target_options@entry=0)
at gdb/gdbserver/linux-low.c:3632
#6 0x000000000042a764 in linux_wait (ptid=..., ourstatus=0x665ec0 <last_status>, target_options=0)
at gdb/gdbserver/linux-low.c:3770
#7 0x0000000000411163 in mywait (ptid=..., ourstatus=ourstatus@entry=0x665ec0 <last_status>, options=options@entry=0, connected_wait=connected_wait@entry=1)
at gdb/gdbserver/target.c:214
#8 0x000000000040b1f2 in resume (actions=0x66f800, num_actions=1) at gdb/gdbserver/server.c:2757
#9 0x000000000040f660 in handle_v_cont (own_buf=0x66a630 "vCont;c:p45e9.-1") at gdb/gdbserver/server.c:2719
when GDBserver steps over a thread, other threads have been suspended,
the "stepping" thread may create new thread, but GDBserver doesn't set
it suspend count to 1. When GDBserver unsuspend threads, the child's
suspend count goes to -1, and the assert is triggered. In fact, GDBserver
has already taken care of suspend count of new thread when GDBserver is
suspending all threads except the one GDBserver wants to step over by
https://sourceware.org/ml/gdb-patches/2015-07/msg00946.html
+ /* If we're suspending all threads, leave this one suspended
+ too. */
+ if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS)
+ {
+ if (debug_threads)
+ debug_printf ("HEW: leaving child suspended\n");
+ child_lwp->suspended = 1;
+ }
but that is not enough, because new thread is still can be spawned in
the thread which is being stepped over. This patch extends the
condition that GDBserver set child's suspend count to one if it is
suspending threads or stepping over the thread.
gdb/gdbserver:
2016-03-03 Yao Qi <yao.qi@linaro.org>
PR server/19736
* linux-low.c (handle_extended_wait): Set child suspended
if event_lwp->bp_reinsert isn't zero.
Replace the code which is exactly what enqueue_pending_signal does.
gdb/gdbserver:
2016-03-02 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Replace code with
enqueue_pending_signal.
Fixes rather embarassing gdb.trace regressions.
gdb/gdbserver/ChangeLog:
* tracepoint.c (cmd_qtstart): Only set ipa_tdesc_idx if agent
is actually loaded.
Currently, 31-bit gdbserver doesn't support collecting/supplying high
GPRs, VX registers, and TDB data. This is not much of a problem now,
since machines that have them usually have a 64-bit gdbserver that can
be used to debug 31-bit targets just fine. However, with fast
tracepoints, it's not possible to use a 64-bit gdbserver with a 31-bit
IPA (and thus a 31-bit target), so 31-bit gdbserver has to be used
for 31-bit targets. Thus, this patch is needed to allow collecting
high GPRs and VX registers on 31-bit targets via fast tracepoints.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_num_regs_3264): Define on 31-bit too.
(s390_regmap_3264) [!__s390x__]: New global.
(s390_collect_ptrace_register): Skip map entries containing -1.
(s390_supply_ptrace_register): Ditto.
(s390_fill_gprs_high): New function.
(s390_store_gprs_high): New function.
(s390_regsets): Add NT_S390_HIGH_GPRS.
(s390_get_hwcap): Enable on 31-bit.
(have_hwcap_s390_high_gprs): Enable on 31-bit.
(s390_arch_setup): Enable detection of high GPRs, TDB, VX on 31-bit.
Detect NT_S390_HIGH_GPRS.
(s390_usrregs_info_3264): Enable on 31-bit.
(s390_regs_info): Enable regs_info_3264 on 31-bit.
(initialize_low_arch): Initialize s390_regsets_info_3264 on 31-bit.
If gdbserver and IPA are using different tdesc, they will disagree
about 'R' trace packet size. This results in mangled traces.
To make sure they pick the same tdesc, gdbserver pokes the tdesc
(specified as an index in a target-specific list) into a global
variable in IPA. In theory, IPA could find out the tdesc on its
own, but that may be complex (in particular, I don't know how to
tell whether we have LAST_BREAK on s390 without messing with ptrace),
and we'd have to duplicate the logic.
Tested on i386 and x86_64. On i386, it fixes two FAILs in ftrace.exp.
On x86_64, these failures have been KFAILed - one of them works now,
but the other now fails due to an unrelated reason (ugh).
gdb/gdbserver/ChangeLog:
PR gdb/13808
* Makefile.in: Add i386-*-linux-ipa.o and amd64-*-linux-ipa.o.
* configure.srv: Ditto.
* linux-aarch64-ipa.c (get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment.
* linux-amd64-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_amd64_linux): Remove prototype.
(tdesc_amd64_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-i386-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_i386_linux): Remove prototype.
(tdesc_i386_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-low.c (linux_get_ipa_tdesc_idx): New function.
(linux_target_ops): wire in linux_get_ipa_tdesc_idx.
* linux-low.h (struct linux_target_ops): Add get_ipa_tdesc_idx.
* linux-x86-low.c: Move tdesc declarations to linux-x86-tdesc.h.
(x86_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in x86_get_ipa_tdesc_idx.
* linux-x86-tdesc.h: New file.
* target.h (struct target_ops): Add get_ipa_tdesc_idx.
(target_get_ipa_tdesc_idx): New macro.
* tracepoint.c (ipa_tdesc_idx): New macro.
(struct ipa_sym_addresses): Add addr_ipa_tdesc_idx.
(symbol_list): Add ipa_tdesc_idx.
(cmd_qtstart): Write ipa_tdesc_idx in the target.
(ipa_tdesc): Remove.
(ipa_tdesc_idx): New variable.
(get_context_regcache): Use get_ipa_tdesc.
(gdb_collect): Ditto.
(gdb_probe): Ditto.
* tracepoint.h (get_ipa_tdesc): New prototype.
(ipa_tdesc): Remove.
gdb/testsuite/ChangeLog:
PR gdb/13808
* gdb.trace/ftrace.exp (test_fast_tracepoints): Remove kfail.
This unbreaks pending/delayed breakpoints handling, as well as
hardware watchpoints, on MIPS.
Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html
The MIPS kernel reports SI_KERNEL for all kernel generated traps,
instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this.
Basically, this commit:
- Folds watchpoints logic into check_stopped_by_breakpoint, and
renames it to save_stop_reason.
- Adds GDB_ARCH_IS_TRAP_HWBKPT.
- Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and
GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we
handle the case of the same si_code returning true for both
TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers
say.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (save_sigtrap) Delete.
(stop_wait_callback): Call save_stop_reason instead of
save_sigtrap.
(check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Bits of save_sigtrap folded here.
Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_nat_filter_event): Call save_stop_reason instead of
save_sigtrap.
* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
si_code for MIPS.
* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
comments on MIPS behavior.
(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
gdb/gdbserver/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-low.c (check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and
handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.
Factor out common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_low_filter_event): Call save_stop_reason instead of
check_stopped_by_breakpoint and check_stopped_by_watchpoint.
Update comments.
(linux_wait_1): Update comments.
Support z-point, so tracepoints and breakpoints can be inserted at the same
location.
gdb/gdbserver/ChangeLog:
2016-02-24 Wei-cheng Wang <cole945@gmail.com>
* linux-ppc-low.c (ppc_supports_z_point_type): New function:
(ppc_insert_point, ppc_remove_point): Insert/remove z-packet breakpoints.
(ppc64_emit_ops_vector): Add target ops - ppc_supports_z_point_type,
ppc_insert_point, ppc_remove_point.
This is necessary for upcoming tracepoint support - otherwise, setting
a tracepoint and a breakpoint on the same address will fail, since gdbserver
won't know about gdb's breakpoint.
Tested on s390x-ibm-linux-gnu and s390-ibm-linux-gnu, RHEL 7.2.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_z_point_type): New function.
(struct linux_target_ops): Wire s390_supports_z_point_type in.
Method syscall_next_pc of struct arm_get_next_pcs_ops has an argument
PC, which is not necessary, because PC can be got from regcache in
'struct arm_get_next_pcs'. This patch removes the PC argument of
syscall_next_pc.
gdb:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
<syscall_next_pc>: Remove argument PC. Callers updated.
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Remove argument PC. Get pc from regcache_read_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
argument PC.
gdb/gdbserver:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_syscall_next_pc): Remove argument
PC. Get pc from regcache_read_pc.
We can use shared functions linux_{set,get}_pc_{64,32}bit in
linux-aarch64-low.c to write and read pc.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_get_pc): Call linux_get_pc_64bit
or linux_get_pc_32bit.
(aarch64_set_pc): Call linux_set_pc_64bit or linux_set_pc_32bit.
When I exercise GDBserver software single step, I see the following
error, which has been already handled by GDB properly.
In GDBserver log, we can see, GDBserver tries to single step instruction
on 0xb6e0a6e4, and destination address is 0xffff0fe0,
stop pc is 0xb6e0a6e4
Writing f001f0e7 to 0xffff0fe0 in process 7132
Failed to insert breakpoint at 0xffff0fe0 (Input/output error).
Failed to insert breakpoint at 0xffff0fe0 (-1).
(gdb) disassemble __aeabi_read_tp,+8
Dump of assembler code from 0xb6e0a6e0 to 0xb6e0a6e8:
0xb6e0a6e0 <__aeabi_read_tp+0>: mvn r0, #61440 ; 0xf000
0xb6e0a6e4 <__aeabi_read_tp+4>: sub pc, r0, #31
however, it fails inserting breakpoint there. This problem has already
fixed by GDB, see comments in arm-linux-tdep.c:arm_linux_software_single_step
/* The Linux kernel offers some user-mode helpers in a high page. We can
not read this page (as of 2.6.23), and even if we could then we
couldn't set breakpoints in it, and even if we could then the atomic
operations would fail when interrupted. They are all called as
functions and return to the address in LR, so step to there
instead. */
so we need to do the same thing in GDB side as well. This patch adds
a new field fixup in arm_get_next_pcs_ops, so that we can fix up PC
for arm-linux target. In this way, both GDB and GDBserver can single
step instructions going to kernel helpers.
gdb:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
self->ops->fixup if it isn't NULL.
* arch/arm-get-next-pcs.h: Include gdb_vecs.h.
(struct arm_get_next_pcs_ops) <fixup>: New field.
* arch/arm-linux.c: Include common-regcache.h and
arch/arm-get-next-pcs.h.
(arm_linux_get_next_pcs_fixup): New function.
* arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
* arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
it with arm_linux_get_next_pcs_fixup.
(arm_linux_software_single_step): Move code to
arm_linux_get_next_pcs_fixup.
* arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_ops): Initialize it with
arm_linux_get_next_pcs_fixup.
This function is now basically identical to write_inferior_data_pointer,
remove it and change all references.
gdb/gdbserver/ChangeLog:
* tracepoint.c (x_tracepoint_action_download): Change
write_inferior_data_ptr to write_inferior_data_pointer.
(cmd_qtstart): Likewise.
(write_inferior_data_ptr): Remove.
(download_agent_expr): Change write_inferior_data_ptr to
write_inferior_data_pointer.
(download_tracepoint_1): Likewise.
(download_tracepoint): Likewise.
(download_trace_state_variables): Likewise.
This patch removes 'ops' in tracepoint, and uses helper functions to
call action handler instead.
The object layout of tracepoint_action may differ in gdbserver and
inferior depend on the alignment rule of target ABI, so gdbserver cannot
simply copy the object from its memory to inferior memory.
For example,
struct collect_memory_action
{
struct tracepoint_action base;
{
#ifndef IN_PROCESS_AGENT
const struct tracepoint_action_ops *ops;
#if
- char type;
| }
| ULONGEST addr;
| ULONGEST len;
- int32_t basereg;
};
and on PowerPC,
Wihtout ops with ops
0 1 2 3 0 1 2 3
0 |type| PADDING... 0 |ops-------------|
4 ................. 4 |type|PADDING....|
8 |addr------------ 8 |addr-------------
c ----------------| c -----------------|
10 |len------------- 10 |len--------------
14 ----------------| 14 -----------------|
18 |basereg--------| 18 |basereg---------|
so we cannot directly copy the object.
In this patch, 'ops' is removed in order to make the objects identical.
gdb/gdbserver/ChangeLog:
2016-02-11 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
* tracepoint.c (struct tracepoint_action_ops): Remove.
(struct tracepoint_action): Remove ops.
(m_tracepoint_action_download, r_tracepoint_action_download)
(x_tracepoint_action_download, l_tracepoint_action_download): Adjust
size and offset accordingly.
(m_tracepoint_action_ops, r_tracepoint_action_ops)
(x_tracepoint_action_ops, l_tracepoint_action_ops): Remove.
(tracepoint_action_send, tracepoint_action_download): New functions.
Helpers for trace action handlers.
(add_tracepoint_action): Remove setup actions ops.
(download_tracepoint_1, tracepoint_send_agent): Call helper functions.
We have function regcache_raw_read_unsigned defined in both GDB and
GDBserver, so that it is used in common like this,
ULONGEST value;
status = regcache_raw_read_unsigned (regcache, regnum, &value);
'value' is correctly set in GDB side, but may not be correctly set
in GDBserver, because &value is passed in regcache_raw_read_unsigned
but collect_register may only set part of the whole variable. In my
test, I see the top half of 'value' is garbage. This patch fixes this
problem by clearing *VAL before calling collect_register.
gdb/gdbserver:
2016-02-10 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_raw_read_unsigned): Clear *VAL.
Using AC_OUTPUT with arguments has been deprecated for some time in
autoconf, even in version 2.64, which we are using. This change should
not affect functionality.
I also removed the "exit 0"'s, they shouldn't be necessary.
gdb/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT. Remove "exit 0" at the end.
* configure: Regenerate.
gdb/testsuite/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
Change the signature of gdbserver's siginfo_fixup functions so that it's
in line with gdb's. This gets rid of the following build error in C++:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c: In function ‘int x86_siginfo_fixup(siginfo_t*, void*, int)’:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:694:21: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
FIXUP_32);
^
In file included from /home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:31:0:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/amd64-linux-siginfo.h:52:5: error: initializing argument 2 of ‘int amd64_linux_siginfo_fixup_common(siginfo_t*, gdb_byte*, int, amd64_siginfo_fixup_mode)’ [-fpermissive]
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:698:20: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
FIXUP_X32);
^
In file included from /home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:31:0:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/amd64-linux-siginfo.h:52:5: error: initializing argument 2 of ‘int amd64_linux_siginfo_fixup_common(siginfo_t*, gdb_byte*, int, amd64_siginfo_fixup_mode)’ [-fpermissive]
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_siginfo_fixup): Change
void * to gdb_byte *.
* linux-low.c (siginfo_fixup): Likewise.
(linux_xfer_siginfo): Likewise.
* linux-low.h (struct linux_target_ops) <siginfo_fixup>:
Likewise.
* linux-x86-low.c (x86_siginfo_fixup): Likewise.
Add a cast to reinterpret a void* as a gdb_byte*.
2016-02-09 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_siginfo_fixup): Add cast to gdb_byte*.
For a forthcoming patch, I need a "skip_to_colon" function. I noticed
there are two skip_to_semicolon (one in gdb and one in gdbserver). I
thought we could put it in common/, and generalize it for any character.
It turns out that the strchrnul function does exactly that. I imported
the corresponding module from gnulib, for those systems that do not have
it.
There are probably more places where this function can be used instead
of doing the work by hand (I am looking at
remote-utils.c::look_up_one_symbol).
gdb/ChangeLog:
* remote.c (skip_to_semicolon): Remove.
(remote_parse_stop_reply): Use strchrnul instead of
skip_to_semicolon.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
strchrnul.
* gnulib/aclocal.m4: Regenerate.
* gnulib/config.in: Regenerate.
* gnulib/configure: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/import/m4/gnulib-comp.m4: Regenerate.
* gnulib/import/m4/rawmemchr.m4: New file.
* gnulib/import/m4/strchrnul.m4: New file.
* gnulib/import/rawmemchr.c: New file.
* gnulib/import/rawmemchr.valgrind: New file.
* gnulib/import/strchrnul.c: New file.
* gnulib/import/strchrnul.valgrind: New file.
gdb/gdbserver/ChangeLog:
* server.c (skip_to_semicolon): Remove.
(process_point_options): Use strchrnul instead of
skip_to_semicolon.
Nowadays, get_next_pcs in linux_target_ops has two parameters PC
and REGCACHE. Parameter PC looks redundant because it can be go
from REGCACHE. The patch is to remove PC from the arguments for
various functions.
gdb:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Remove argument pc. Get pc by regcache_read_pc. Callers updated.
(arm_deal_with_atomic_sequence_raw): Likewise.
(thumb_get_next_pcs_raw): Likewise.
(arm_get_next_pcs_raw): Likewise.
(arm_get_next_pcs): Remove argument pc. Callers updated.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Remove argument pc.
* linux-low.c (install_software_single_step_breakpoints): Don't
call regcache_read_pc.
* linux-low.h (struct linux_target_ops) <get_next_pcs>: Remove
argument pc.
In install_software_single_step_breakpoints, we've got the regcache
of current_thread, so we don't have to bother get_pc to get pc,
instead we can get pc from regcache directly. Note that the callers
of install_software_single_step_breakpoints have already switched
current_thread to LWP.
Since the pc is got from regcache_read_pc, in the next patch, we can
get pc inside the implementation of *the_low_target.get_next_pcs and
stop passing pc to *the_low_target.get_next_pcs.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (install_software_single_step_breakpoints): Call
regcache_read_pc instead of get_pc.
Nowadays, GDBserver disables async io (by ignoring SIGIO) when process
a serial event, and enables async io (by installing signal handler) when
resume the inferior and wait. GDBserver may miss SIGIO (by interrupt)
and doesn't process SIGIO in time, which is shown by
gdb.base/interrupt-noterm.exp. In the test, GDB sends "continue &" and
then "interrupt". if '\003' arrives at a period between GDBserver
receives vCont;c and enables async io, SIGIO is ignored because signal
handler isn't installed. GDBserver waits for the inferior and can not
notice '\003' until it returns from wait.
This patch changes the code to install SIGIO handler early, but block
and unblock SIGIO as needed. In this way, we don't remove SIGIO
handler, so SIGIO can't be ignored. However, GDBserver needs to
remove the signal handler when connection is closed.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (remote_close) [!USE_WIN32API]: Ignore SIGIO.
(unblock_async_io): Rename to ...
(block_unblock_async_io): ... it. New function.
(enable_async_io): Don't install SIGIO handler. Unblock it
instead.
(disable_async_io): Don't ignore SIGIO. Block it instead.
(initialize_async_io): Install SIGIO handler. Don't call
unblock_async_io.
GDBserver may read some packet together with '\003' in one go. We've
already checked '\003' first when reading packet by my patch,
Check input interrupt first when reading packet
https://sourceware.org/ml/gdb-patches/2016-01/msg00057.html
but if we don't check '\003' *after* each packet, the interrupt will
be processed next time GDBserver reads from the buffer, so that the
interrupt isn't processed in time. For example, GDB sends vCont;c and
interrupt (see gdb.base/interrupt-noterm.exp), we'll resume the
inferior and wait once packet vCont;c is seen. If we don't check the
interrupt character after vCont;c packet, interrupt character will stay
in the buffer unattended until GDBserver returns from the wait, which
may take a while. Note that since we've read '\003' from file
descriptor, SIGIO signal handler input_interrupt doesn't help either.
This issue can be exposed by hacking the end of getpkt like
@@ -1041,6 +1050,9 @@ getpkt (char *buf)
}
}
+ if (readchar_bufcnt > 0)
+ gdb_assert (*readchar_bufp != '\003');
+
return bp - buf;
}
and this can trigger internal error,
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
Remote connection closed^M
(gdb) FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT
Remote debugging from host 10.2.206.40^M
/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/remote-utils.c:1054: A problem internal to GDBserver has been detected.^M
getpkt: Assertion `*readchar_bufp != '\003'' failed.^M
This patch is to peek the buffer, if it is '\003', consume it and call
*the_target->request_interrupt.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If the buffer isn't empty, and the
first character is '\003', call *the_target->request_interrupt.
They were added by
PATCH: Multithreaded debugging for gdbserver
https://sourceware.org/ml/gdb-patches/2002-06/msg00157.html
but as a no-op, and the last usage of them was removed by
[gdbserver/RFC/RFA] Implement multiprocess extensions, add linux multiproces support.
https://sourceware.org/ml/gdb-patches/2009-03/msg00667.html
This patch is to remove them.
gdb/gdbserver:
2016-01-25 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (new_thread_notify): Remove.
(dead_thread_notify): Likewise.
* remote-utils.h (new_thread_notify): Remove declaration.
(dead_thread_notify): Likewise.
Missed one message in bd0a71fa16, since it
didn't trigger on s390x or amd64 (fast tracepoint out of range due to
shared library usage), noticed on s390.
Pushed as obvious.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Fix expected message on continue.
Noticed and tested on 31-bit s390. This bug caused completely broken
fast tracepoints.
gdb/gdbserver/ChangeLog:
* tracepoint.c (write_inferior_data_ptr): Cast to uintptr_t, so that
it works properly on big-endian machines where sizeof (CORE_ADDR)
!= sizeof (void *).
Currently, even when built with --enable-build-with-cxx, gdb uses
CFLAGS instead of CXXFLAGS. This commit fixes it.
CXXFLAGS set in the environment when configure was run is now honored
in the generated gdb/Makefile, and you can also override CXXFLAGS in
the command like at make time, with the usual 'make CXXFLAGS="..."'
Objects built with a C compiler (e.g., gnulib) still honor CFLAGS
instead.
gdb/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS, CXXFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use COMPILER_CFLAGS instead of CFLAGS.
* configure: Regenerate.
This patch fixes the following regression introduced by commit d0e59a68
step^M
39 } /* handler */^M
1: x/i $pc^M
=> 0x8740 <handler+80>: sub sp, r11, #0^M
(gdb) step^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
setitimer () at ../sysdeps/unix/syscall-template.S:81^M
81 ../sysdeps/unix/syscall-template.S: No such file or directory.^M
1: x/i $pc^M
=> 0xb6eff9c0 <setitimer>: push {r7}^M
(gdb) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
in my test setting, program is compiled in arm mode, but the glibc
is built in thumb mode, so when we do 'step' to step over syscall
instruction svc for SIGRETURN, GDB should set breakpoint for arm mode
in the program, even though the current program in glibc is in thumb
mode. Current GDB doesn't consider the case that the mode of program
SIGRETURN goes to can be different from current program mode.
In fact, GDB has taken care of this arm/thumb mode changes already,
see
/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
return 1. In addition, set IS_THUMB depending on whether we
will return to ARM or Thumb code. Return 0 if it is not a
rt_sigreturn/sigreturn syscall. */
static int
arm_linux_sigreturn_return_addr (struct frame_info *frame,
unsigned long svc_number,
CORE_ADDR *pc, int *is_thumb)
but in the commit d0e59a68
> - arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
> + if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
> + next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
the IS_THUMB setting is lost, so it is a regression.
gdb:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
gdb/gdbserver:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_sigreturn_next_pc.
This patch is the follow-up of
https://sourceware.org/ml/gdb-patches/2016-01/msg00164.html to provide
linux_{get,set}_pc_64bit functions.
Rebuild GDBserver with tilegx-linux-gcc. Not tested.
I think about pc in Tile-GX a little bit. Looks current Tile-GX
supports debugging 32-bit program (multi-arch), but PC is always
64-bit. See this thread
https://sourceware.org/ml/gdb-patches/2013-02/msg00113.html
and GDBserver reads PC as 64-bit through ptrace. However, if
the inferior is 32-bit, the PC in the target description and
regcache is 32-bit, so only 32-bit contents are sent back GDB.
Anyway, Tile-GX GDBserver may have some problems here, but this
patch doesn't change anything.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_set_pc_64bit): New function.
(linux_get_pc_64bit): New function.
* linux-low.h (linux_set_pc_64bit, linux_get_pc_64bit):
Declare.
* linux-sparc-low.c (debug_threads): Remove declaration.
(sparc_get_pc): Remove.
(the_low_target): Use linux_get_pc_64bit instead of
sparc_get_pc.
* linux-tile-low.c (tile_get_pc, tile_set_pc): Remove.
(the_low_target): Use linux_get_pc_64bit and
linux_set_pc_64bit.
This patch adds a pair of new functions linux_get_pc_32bit and
linux_set_pc_32bit which get and set 32-bit register "pc" from
regcache. This function can be used some targets and these own
$ARCH_{get,set}_pc are replaced by linux_{get,set}_pc_32bit
respectively.
This patch touches many targets, but I only have arm board to
test and no regression. I also rebuilt nios2-linux GDBserver.
If it is right to go, I'll post the 64-bit counterpart later.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (debug_threads): Remove declaration.
(arm_get_pc, arm_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-bfin-low.c (bfin_get_pc, bfin_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-cris-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc,): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-crisv32-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-low.c: Include inttypes.h.
(linux_get_pc_32bit, linux_set_pc_32bit): New functions.
* linux-low.h (linux_get_pc_32bit, linux_set_pc_32bit): Declare.
* linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-m68k-low.c (m68k_get_pc, m68k_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-nios2-low.c (nios2_get_pc, nios2_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-sh-low.c (sh_get_pc, sh_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-xtensa-low.c (xtensa_get_pc, xtensa_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
This commit fixes nat/linux-namespaces.c to build correctly on
targets without fork.
gdb/ChangeLog:
* nat/linux-namespaces.c (do_fork): New function.
(linux_mntns_get_helper): Use the above.
gdb/gdbserver/ChangeLog:
* configure.ac (AC_FUNC_FORK): New check.
* config.in: Regenerate.
* configure: Likewise.
This patch makes thumb2_breakpoint static. When writing this patch,
I find the only reason we keep thumb2_breakpoint extern is that it
is used as an argument passed to arm_gdbserver_get_next_pcs. However,
field arm_thumb2_breakpoint is only used in a null check in
thumb_get_next_pcs_raw, so I wonder why do need to pass thumb2_breakpoint
to arm_gdbserver_get_next_pcs.
thumb2_breakpoint was added by Daniel Jacobowitz in order to support
single-step IT block
https://sourceware.org/ml/gdb-patches/2010-01/msg00624.html the logic
there was if we have 32-bit thumb-2 breakpoint defined, we can safely
single-step IT block, otherwise, we can't. Daniel didn't want to use
16-bit thumb BKPT instruction, because it triggers even on instruction
which should be executed. Secondly, using 16-bit thumb illegal
instruction on top of 32-bit thumb instruction may break the meaning of
original IT blocks, because the other 16-bit can be regarded as an
instruction. See more explanations from Daniel's kernel patch
http://www.spinics.net/lists/arm-kernel/msg80476.html
Let us back to this patch, GDB/GDBserver can safely single step
IT block if thumb2_breakpoint is defined, but the single step logic
doesn't have to know the thumb-2 breakpoint instruction. Only
breakpoint insertion mechanism decides to use which breakpoint
instruction. In the software single step code, instead of pass
thumb2_breakpoint, we can pass a boolean variable
has_thumb2_breakpoint indicate whether the target has thumb-2
breakpoint defined, which is equivalent to the original code.
Regression tested on arm-linux. No regression.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
instead.
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
<arm_thumb2_breakpoint>: Remove.
<has_thumb2_breakpoint>: New field.
(arm_get_next_pcs_ctor): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass
1 to arm_get_next_pcs_ctor.
* arm-tdep.c (arm_software_single_step): Pass 0 to
arm_get_next_pcs_ctor.
gdb/gdbserver:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (thumb2_breakpoint): Make it static.
* linux-aarch32-low.h (thumb2_breakpoint): Remove declaration.
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Pass 1 to
arm_get_next_pcs_ctor.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
We need to use -Wno-missing-prototypes for now as much of the code
sticks externs in local files and not in common headers.
2016-01-11 Mike Frysinger <vapier@gentoo.org>
* acinclude.m4: Include new ../warning.m4 file.
* configure: Regenerated.
* configure.ac: Replace all warning logic with AM_GDB_WARNINGS.
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
Hi,
I see timeout in one of several runs of random-signal.exp like this,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In about every five runs, we can see a fail,
PASS: gdb.base/random-signal.exp: continue
^CFAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
after some investigation, I find '\003' may be discarded by GDBserver when
it is expecting '$'. In GDB side, both normal packets and '\003' are sent
via function send, but GDBserver may receive them at any time, that is to
say, in the receive buffer in GDBserver, '\003' may appear before or after
normal packet. However, current GDBserver doesn't handle this case.
With this patch applied, I don't see this fail in multiple runs.
Although there is still timeout fail, that is a different problem, the
next patch will fix it.
gdb/gdbserver:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If c is '\003', call target hook
request_interrupt.
This patch fixes gcc warning when build ARM GDBserver and AArch64
GDBserver,
AArch64 GDBserver:
gdb/gdbserver/linux-aarch32-low.h:36:29: error: 'thumb2_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
^
gdb/gdbserver/linux-aarch32-low.h:34:29: error: 'thumb_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb_breakpoint = 0xde01;
^
gdb/gdbserver/linux-aarch32-low.h:28:28: error: 'arm_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
^
cc1: all warnings being treated as errors
ARM GDBserver:
gdb/gdbserver/linux-aarch32-low.h:34:29: error: 'thumb_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb_breakpoint = 0xde01;
^~~~~~~~~~~~~~~~
gdb/gdbserver/linux-aarch32-low.h:28:28: error: 'arm_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
^~~~~~~~~~~~~~
by simply moving these macros and variables to
linux-aarch32-low.c and only declare thumb2_breakpoint in
linux-aarch32-low.h, which is not perfect, and reveals some issues
in recent arm GDBserver software single step changes. I'll post
follow-up patches.
gdb/gdbserver:
2016-01-06 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.h (arm_abi_breakpoint): Move to
linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
(thumb2_breakpoint): Declare.
* linux-aarch32-low.c (arm_abi_breakpoint): Moved from
linux-aarch32-low.h.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
gdb/ChangeLog:
* top.c (print_gdb_version): Change copyright year in version
message.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Change copyright year in
version message.
* server.c (gdbserver_version): Likewise.
Tested on x86_64-pc-linux-gnu native-gdbserver, no new regressions.
gdb/gdbserver/ChangeLog:
* server.c (crc32_table): Delete.
(crc32): Use libiberty's xcrc32 function.
With any program under GDBserver control on LynxOS, killing
the program from the debugger (using the "kill" command) causes
GDBserver to properly kill the inferior but GDBserver then hangs.
This change of behavior occured after the following change was
applied:
commit f0ea042932e6922c90df3fd0001497d287b97677
Date: Mon Nov 30 16:05:27 2015 +0000
Subject: gdbserver: don't exit until GDB disconnects
One of the changes introduced by the commit above is that
process_serial_event no longer calls exit after handling
the vKill packet. Instead, what happens is that we wait
until captured_main finds that we no longer have any inferior
to debug, at which point it throws_quit. This (normal) exception
is then expected to propagate all the way to the exception handle
in function "main", which calls exit.
However, before the exception gets propagated, the cleanups
are first executed, and one of the cleanups in question is
detach_or_kill_for_exit_cleanup, which was put in place by
captured_main. detach_or_kill_for_exit_cleanup is basically
a wrapper around detach_or_kill_for_exit, which iterates
over all inferiors, and kills them all.
In our case, we have only one inferior, which we have already
killed during the handling for the "vKill" packet. Unfortunately,
we did not properly clean our internal data for that inferior up,
and so detach_or_kill_for_exit thinks that we still have one inferior,
and therefore tries to kill it. This results in lynx_kill being
called, doing the following:
lynx_ptrace (PTRACE_KILL, ptid, 0, 0, 0);
lynx_wait (ptid, &status, 0);
the_target->mourn (process);
The hang is caused by the call to lynx_wait, which waits for
an event from a process which does not exist...
This patch fixes the issue by enhancing lynx_mourn to clean
the threads and process list up.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_delete_thread_callback): New function.
(lynx_mourn): Properly delete our process and all of its
threads. Remove call to clear_inferiors.
Connecting GDB to a LynxOS-178 GDBserver causes GDBserver to crash:
% gdbserver :4444 simple_main
Process simple_main created; pid = 19
Listening on port 4444
Remote debugging from host 205.232.38.10
Segmentation fault (core dumped)
The crash happens in thread_search_callback where the function
calls the_target->thread_stopped (via the thread_stopped macro)
without verifying whether the callback is NULL or not.
For the record, the regression was introduced by:
commit a67a9faef0
Date: Mon Nov 30 16:05:26 2015 +0000
Subject: gdbserver:prepare_access_memory: pick another thread
This patch avoids the crash by checking the value of the callback
first, before calling it.
gdb/gdbserver/ChangeLog:
* target.c (thread_search_callback): Add check that
the thread_stopped target callback is not NULL before
calling it.
This patch is to get b37a6290 back again, which was removed by
d9311bfa by mistake.
gdb/gdbserver:
2015-12-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.h [__aarch64__]: Use arm_abi_breakpoint
arm breakpoint.
This patch enables support for conditional breakpoints if the target supports
software single step.
This was disabled before as the implementations of software single step were too
simple as discussed in
https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html.
Since these issues are now fixed support can be added back.
New tests passing :
PASS: gdb.base/cond-eval-mode.exp: set breakpoint condition-evaluation
target and related...
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* server.c (handle_query): Call target_supports_software_single_step.
This patch enables software single stepping if the targets support it,
to do while-stepping actions.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (single_step): New function.
(linux_resume_one_lwp_throw): Call single_step.
(start_step_over): Likewise.
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
This patch is in preparation for software single step support on ARM in
GDBServer. It adds a new shared function regcache_raw_read_unsigned and
regcache_raw_get_unsigned so that GDB and GDBServer can use the same call
to fetch a raw register into an integer.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(COMMON_OBS): Append common/common-regcache.o.
(common-regcache.o): New rule.
* common/common-regcache.h (register_status) New enum.
(regcache_raw_read_unsigned): New declaration.
* common/common-regcache.c: New file.
* regcache.h (enum register_status): Move to common-regcache.h.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_get_unsigned): Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(OBS): Append common-regcache.o.
(common-regcache.o): New rule.
* regcache.c (init_register_cache): Initialize cache to
REG_UNAVAILABLE.
(regcache_raw_read_unsigned): New function.
* regcache.h (REG_UNAVAILABLE, REG_VALID): Replaced by shared
register_status enum.
This patch in preparation for software single step support on ARM. It refactors
breakpoint_reinsert_addr into get_next_pcs so that multiple location can be
returned.
When software single stepping there can be multiple possible next addresses
because we're stepping over a conditional branch instruction, for example.
The operation get_next_pcs handles that by returning a vector of all the
possible next addresses.
Software breakpoints are installed at each location returned.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (the_low_targets): Rename
breakpoint_reinsert_addr to get_next_pcs.
* linux-arm-low.c (the_low_targets): Likewise.
* linux-bfin-low.c (the_low_targets): Likewise.
* linux-cris-low.c (the_low_targets): Likewise.
* linux-crisv32-low.c (the_low_targets): Likewise.
* linux-low.c (can_software_single_step): Likewise.
(install_software_single_step_breakpoints): New function.
(start_step_over): Use install_software_single_step_breakpoints.
* linux-low.h: New CORE_ADDR vector.
(struct linux_target_ops) Rename breakpoint_reinsert_addr to
get_next_pcs.
* linux-mips-low.c (the_low_targets): Likewise.
* linux-nios2-low.c (the_low_targets): Likewise.
* linux-sparc-low.c (the_low_targets): Likewise.
Since we now rely on PTRACE_EVENT_CLONE being available (added in
Linux 2.5.46), we're relying on NPTL.
This commit removes the support for older LinuxThreads, as well as the
workarounds for vendor 2.4 kernels with NPTL backported.
- Rely on tkill being available.
- Assume gdb doesn't get cancel signals.
- Remove code that checks the LinuxThreads restart and cancel signals
in the inferior.
- Assume that __WALL is available.
- Assume that non-leader threads report WIFEXITED.
- Thus, no longer need to send signal 0 to check whether threads are
still alive.
- Update comments throughout.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
* configure.ac: Remove tkill checks.
* configure, config.in: Regenerate.
* linux-nat.c: Remove HAVE_TKILL_SYSCALL check. Update top level
comments.
(linux_nat_post_attach_wait): Remove 'cloned' parameter. Use
__WALL.
(attach_proc_task_lwp_callback): Don't set the cloned flag.
(linux_nat_attach): Adjust.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_handle_extended_wait): Use __WALL. Don't set the cloned
flag.
(wait_lwp): Use __WALL. Update comments.
(running_callback, stop_and_resume_callback): Delete.
(linux_nat_filter_event): Don't stop and resume all lwps. Don't
check if the event LWP has previously exited.
(check_zombie_leaders): Update comments.
(linux_nat_wait_1): Use __WALL.
(kill_wait_callback): Don't handle clone processes separately.
Use __WALL instead.
(linux_thread_alive): Delete.
(linux_nat_thread_alive): Return true as long as the LWP is in the
LWP list.
(linux_nat_update_thread_list): Assume the kernel supports
PTRACE_EVENT_CLONE.
(get_signo): Delete.
(lin_thread_get_thread_signals): Remove LinuxThreads references.
No longer check __pthread_sig_restart / __pthread_sig_cancel in
the inferior.
* linux-nat.h (struct lwp_info) <cloned>: Delete field.
* linux-thread-db.c: Update comments.
(_initialize_thread_db): Remove LinuxThreads references.
* nat/linux-waitpid.c (my_waitpid): No longer emulate __WALL.
Pass down flags unmodified.
* linux-waitpid.h (my_waitpid): Update documentation.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_kill_one_lwp): Remove references to
LinuxThreads.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_init_signals): Delete.
(initialize_low): Adjust.
* thread-db.c (thread_db_init): Remove LinuxThreads reference.
Ref: https://sourceware.org/ml/gdb/2015-12/msg00024.html
We have code in configure.ac that tries to detect whether the compiler
supports each warning and suppress it if not, but that doesn't work
with "-Wno-" options, because gcc doesn't error out for
-Wno-unknown-warning unless other diagnostics are being produced.
See https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html.
Handle this by checking whether -Wfoo works when we actually want
-Wno-foo.
gdb/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
This patch implements support for fork and exec events with target remote
mode Linux targets. For such targets with Linux kernels 2.5.46 and later,
this enables follow-fork-mode, detach-on-fork and fork and exec
catchpoints.
The changes required to implement this included:
* Don't exit from gdbserver if there are still active inferiors.
* Allow changing the active process in remote mode.
* Enable fork and exec events in remote mode.
* Print "Ending remote debugging" only when disconnecting.
* Combine remote_kill and extended_remote_kill into a single function
that can handle the multiple inferior case for target remote. Also,
the same thing for remote_mourn and extended_remote_mourn.
* Enable process-style ptids in target remote.
* Remove restriction on multiprocess mode in target remote.
gdb/gdbserver/ChangeLog:
* server.c (process_serial_event): Don't exit from gdbserver
in remote mode if there are still active inferiors.
gdb/ChangeLog:
* inferior.c (number_of_live_inferiors): New function.
(have_live_inferiors): Use number_of_live_inferiors in place
of duplicate code.
* inferior.h (number_of_live_inferiors): Declare new function.
* remote.c (set_general_process): Remove restriction on target
remote mode.
(remote_query_supported): Likewise.
(remote_detach_1): Exit in target remote mode only when there
is just one live inferior left.
(remote_disconnect): Unpush the target directly instead of
calling remote_mourn.
(remote_kill): Rewrite function to handle both target remote
and extended-remote. Call remote_kill_k.
(remote_kill_k): New function.
(extended_remote_kill): Delete function.
(remote_mourn, extended_remote_mourn): Combine functions into
one, remote_mourn, and enable extended functionality for target
remote.
(remote_pid_to_str): Enable "process" style ptid string for
target remote.
(remote_supports_multi_process): Remove restriction on target
remote mode.
AArch64 GDBserver can debug ARM program, and it should recognize
various arm breakpoint instructions. This patch should be included
in 17b1509a.
gdb/gdbserver:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_breakpoint_at): Call
arm_breakpoint_at if the process is 32-bit.
Nowdays, GDBserver chooses arm breakpoint instructions by checking
macro __ARM_EABI__. When aarch64 GDBserver debugs arm program,
arm_eabi_breakpoint is still needed, but __ARM_EABI__ isn't defined
in aarch64 compiler. This causes GDBserver chooses the wrong
breakpoint instruction for arm program. This patch fixes it.
gdb/gdbserver:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c [__aarch64__]: Use arm_abi_breakpoint
arm breakpoint.
In commit 6085d6f6, Z0 packet is disabled in aarch64 GDBserver if
the inferior is 32-bit or there may be multiple inferiors, because
Z0 packet isn't supported for arm then. Recently, Z0 packet
is supported in arm target, so we don't have such limitation in
aarch64 GDBserver, that is to say, aarch64 GDBserver can use Z0
packet in multi-arch/multi-inferior debugging when the inferior's
arch is arm.
Part of this patch is to revert 6085d6f6, and the rest of the patch
is to move some breakpoint related arm_* functions into
linux-aarch32-low.c in order to share them between arm and aarch64.
This patch is regression tested on aarch64-linux for debugging both
aarch64 programs and arm programs respectively.
gdb/gdbserver:
2015-12-07 Yao Qi <yao.qi@linaro.org>
* configure.srv: Append arm.o to srv_tgtobj for
aarch64*-*-linux* target.
* linux-aarch32-low.c (arm_abi_breakpoint): New macro. Moved
from linux-arm-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode, arm_breakpoint_at): Likewise.
(arm_breakpoint_kinds): Likewise.
(arm_breakpoint_kind_from_pc): Likewise.
(arm_sw_breakpoint_from_kind): Likewise.
(arm_breakpoint_kind_from_current_state): Likewise.
* linux-aarch32-low.h (arm_breakpoint_kind_from_pc): Declare.
(arm_sw_breakpoint_from_kind): Declare.
(arm_breakpoint_kind_from_current_state): Declare.
(arm_breakpoint_at): Declare.
* linux-aarch64-low.c (aarch64_sw_breakpoint_from_kind): Call
arm_sw_breakpoint_from_kind if process is 32-bit.
(aarch64_breakpoint_kind_from_pc): New function.
(aarch64_breakpoint_kind_from_current_state): New function.
(the_low_target): Initialize fields breakpoint_kind_from_pc
and breakpoint_kind_from_current_state.
* linux-arm-low.c (arm_breakpoint_kinds): Move to
linux-aarch32-low.c.
(arm_abi_breakpoint, arm_eabi_breakpoint): Likewise.
(arm_breakpoint, arm_breakpoint_len): Likewise.
(thumb_breakpoint, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Likewise.
(arm_breakpoint_at): Likewise.
(arm_breakpoint_kind_from_pc): Likewise.
(arm_sw_breakpoint_from_kind): Likewise.
(arm_breakpoint_kind_from_current_state): Likewise.
Revert:
2015-08-04 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_supports_z_point_type): Return
0 for Z_PACKET_SW_BP if it may be used in multi-arch debugging.
* server.c (extended_protocol): Remove "static".
* server.h (extended_protocol): Declare it.
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
A duplicate include arm/arm.h was introduced, remove it.
Pushed as obvious.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c: Remove duplicate arch/arm.h include.
This patch removes too simple implementations of the breakpoint_reinsert_addr
operation.
The only reason to keep them around was to support thread events when
PTRACE_EVENT_CLONE was not present but this support has been removed in a
previous patch.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Also compilation was tested on aarch64, bfin, cris, crisv32,
m32r, mips, nios2, ppc, s390, sparc, tic6x, tile, xtensa.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_reinsert_addr): Remove function.
(struct linux_target_ops <breakpoint_reinsert_addr>: Set to NULL.
* linux-cris-low.c (cris_reinsert_addr> Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-crisv32-low.c (cris_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-mips-low.c (mips_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-nios2-low.c (nios2_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-sparc-low.c (sparc_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
This patch removes support for thread events if PTRACE_EVENT_CLONE is not
supported in GDBServer.
Before, on systems that did not support PTRACE_EVENT_CLONE, both GDB and
GDBServer coordinated with libthread_db.so to insert breakpoints at magic
locations in libpthread.so, in order to break at thread creation and thread
death.
Simple software single stepping support was implemented to step over these
breakpoints in case there was no hardware single stepping support. However,
these simple software single stepping implementations were not fit for any other
use as discussed in :
https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html
These too simple implementations conflict with ongoing work to make proper
implementations of software single stepping in GDBServer.
The problem is that if some implementations are correct and others are not and
only there for the thread magic breakpoint, we can't enable features based
solely software single step support since some would be broken.
To keep the incorrect implementations and allow the new proper ones at the same
time we would need to implement fallback code and it quickly becomes ugly and
confusing with multiple checks for legacy software single step or proper
software single step.
However, PTRACE_EVENT_CLONE was first introduced in Linux 2.5.46,
released in November 2002.
So I think it's reasonable to just remove support for kernels that don't support
PTRACE_EVENT_CLONE, and sidestep the libthread_db breakpoints issues entirely.
This thread on the mailling list discusses the issue :
https://sourceware.org/ml/gdb/2015-10/msg00078.html
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_look_up_symbols): Don't call
linux_supports_traceclone.
* linux-low.h (thread_db_init): Remove use_events argument.
* thread-db.c (thread_db_use_event): Remove global variable.
(struct thread_db) <td_thr_event_enable_p>: Remove field.
(struct thread_db) <td_create_bp>: Remove field.
(thread_db_create_event): Remove function.
(thread_db_enable_reporting): Likewise.
(find_one_thread): Don't check for thread_db_use_events.
(attach_thread): Likewise.
(thread_db_load_search): Remove td_thr_event_enable_p initialization.
(try_thread_db_load_1): Don't check for thread_db_use_events.
(thread_db_init): Remove use_events argument and thread events
handling.
(remove_thread_event_breakpoints): Remove function.
(thread_db_detach): Remove call to remove_thred_event_breakpoints.
Before this patch there was only one call: can_hardware_single_step. Its
implementation was a check on breakpoint_reinsert_addr if NULL it assumed
that the target could hardware single step.
This patch prepares for the case where this is not true anymore.
In order to improve software single stepping in GDBServer the
breakpoint_reinsert_addr operation of targets that had a very simple
software implementation used only for stepping over thread creation events
will be removed.
This will create a case where a target does not support hardware single
step and has the operation breakpoint_reinsert_addr set to NULL, thus
can_hardware_single_step needs to be implemented another way.
A new target operation supports_hardware_single_step is introduced and is
to return true if the target does support such a feature, support for the
feature is manually hardcoded.
Note that the hardware single step support was enabled as per the current
behavior, I did not check if tile for example really has ptrace singlestep
support but since the current implementation assumed it had, I kept it
that way.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Compilation tested on: aarch64,arm,bfind,crisv32,m32r,ppc,s390,tic6x,tile,
xtensa.
Not tested : sh.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-arm-low.c (arm_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-bfin-low.c (bfin_supports_hardware_single_step): New function.
(struct linux_target_ops) <bfin_supports_hardware_single_step>:
Initialize.
* linux-crisv32-low.c (cris_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-low.c (can_hardware_single_step): Use
supports_hardware_single_step.
(can_software_single_step): New function.
(start_step_over): Call can_software_single_step.
(linux_supports_hardware_single_step): New function.
(struct target_ops) <supports_software_single_step>: Initialize.
* linux-low.h (struct linux_target_ops)
<supports_hardware_single_step>: Initialize.
* linux-m32r-low.c (m32r_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-ppc-low.c (ppc_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step> Initialize.
* linux-s390-low.c (s390_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-sh-low.c (sh_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-tic6x-low.c (tic6x_supports_hardware_single_step): New function.
(struct linux_target_ops) <tic6x_supports_hardware_single_step>:
Initialize.
* linux-tile-low.c (tile_supports_hardware_single_step): New function.
(struct linux_target_ops) <tile_supports_hardware_single_step>:
Initialize.
* linux-x86-low.c (x86_supports_hardware_single_step) New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-xtensa-low.c (xtensa_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* target.h (struct target_ops): <supports_software_single_step>:
New field.
(target_supports_software_single_step): New macro.
Without this patch, when doing a software single step, with for example
a conditional breakpoint, gdbserver would wrongly avance the pc of
breakpoint_len and skips an instruction.
This is due to gdbserver assuming that it's hardware single stepping.
When it resumes from the breakpoint address it expects the trap to be
caused by ptrace and if it's rather caused by a software breakpoint
it assumes this is a permanent breakpoint and that it needs to skip
over it.
However when software single stepping, this breakpoint is legitimate as
it's the reinsert breakpoint gdbserver has put in place to break at
the next instruction. Thus gdbserver wrongly advances the pc and skips
an instruction.
This patch fixes this behavior so that gdbserver checks if it is a
reinsert breakpoint from software single stepping. If it is it won't
advance the pc. And if there's no reinsert breakpoint there we assume
then that it's a permanent breakpoint and advance the pc.
Here's a commented log of what would happen before and after the fix on
gdbserver :
/* Here there is a conditional breakpoint at 0x10428 that needs to be
stepped over. */
Need step over [LWP 11204]? yes, found breakpoint at 0x10428
...
/* e7f001f0 is a breakpoint instruction on arm
Here gdbserver writes the software breakpoint we would like to hit
*/
Writing e7f001f0 to 0x0001042c in process 11204
...
Resuming lwp 11220 (continue, signal 0, stop not expected)
pending reinsert at 0x10428
stop pc is 00010428
continue from pc 0x10428
...
/* Here gdbserver hit the software breakpoint that was in place
for the step over */
stop pc is 0001042c
pc is 0x1042c
step-over for LWP 11220.11220 executed software breakpoint
Finished step over.
Could not find fast tracepoint jump at 0x10428 in list (reinserting).
/* Here gdbserver writes back the original instruction */
Writing e50b3008 to 0x0001042c in process 11220
Step-over finished.
Need step over [LWP 11220]? No
/* Here because gdbserver assumes this is a permenant breakpoint it advances
the pc of breakpoint_len, in this case 4 bytes, so we have just skipped
the instruction that was written back here :
Writing e50b3008 to 0x0001042c in process 11220
*/
stop pc is 00010430
pc is 0x10430
Need step over [LWP 11220]? No, no breakpoint found at 0x10430
Proceeding, no step-over needed
proceed_one_lwp: lwp 11220
stop pc is 00010430
This patch fixes this situation and we get the right behavior :
Writing e50b3008 to 0x0001042c in process 11245
Hit a gdbserver breakpoint.
Hit a gdbserver breakpoint.
Step-over finished.
proceeding all threads.
Need step over [LWP 11245]? No
stop pc is 0001042c
pc is 0x1042c
Need step over [LWP 11245]? No, no breakpoint found at 0x1042c
Proceeding, no step-over needed
proceed_one_lwp: lwp 11245
stop pc is 0001042c
pc is 0x1042c
Resuming lwp 11245 (continue, signal 0, stop not expected)
stop pc is 0001042c
continue from pc 0x1042c
It also works if the value at 0x0001042c is a permanent breakpoint.
If so gdbserver will finish the step over, remove the reinserted breakpoint,
resume at that location and on the next SIGTRAP gdbserver will trigger
the advance PC condition as reinsert_breakpoint_inserted_here will be false.
I also tested this against bp-permanent.exp on arm (with a work in progress
software single step patchset) without any regressions.
It's also tested against x86 bp-permanent.exp without any regression.
So both software and hardware single step are tested.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Fix pc advance condition.
* mem-break.c (reinsert_breakpoint_inserted_here): New function.
* mem-break.h (reinsert_breakpoint_inserted_here): New declaration.
When manually stepping over a permanent breakpoint on ARM we need to fetch the
right breakpoint size based on the current instruction set used.
Since this is not encoded in the stop_pc, the instruction mode needs to be
fetched from the CPSR register.
This is done by introducing a new target operation called :
breakpoint_kind_from_current_state.
For other targets that do not need this, breakpoint_kind_from_pc is used.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_is_thumb_mode): New function.
(arm_breakpoint_at): Use arm_is_thumb_mode.
(arm_breakpoint_kind_from_current_state): New function.
(struct linux_target_ops) <breakpoint_kind_from_current_state>:
Initialize.
* linux-low.c (linux_wait_1): Call breakpoint_kind_from_current_state.
(linux_breakpoint_kind_from_current_state): New function.
(struct target_ops <breakpoint_kind_from_current_state>: Initialize.
* linux-low.h (struct linux_target_ops)
<breakpoint_kind_from_current_state>: New field.
* target.h (struct target_ops): Likewise.
(target_breakpoint_kind_from_current_state): New macro.
When testing with "target remote" with "maint set target-non-stop on",
we regressions like this:
Running /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/continue-pending-after-query.exp ...
FAIL: gdb.threads/continue-pending-after-query.exp: iter 4: continue until exit
FAIL: gdb.threads/continue-pending-after-query.exp: iter 6: continue until exit
FAIL: gdb.threads/continue-pending-after-query.exp: iter 10: continue until exit
=== gdb Summary ===
# of expected passes 28
# of unexpected failures 3
where gdb.log shows:
continue
Continuing.
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) FAIL: gdb.threads/continue-pending-after-query.exp: iter 4: continue until exit
Enabling gdb + gdbserver debug logs we see:
gdbserver: <<<< exiting linux_wait_1
gdbserver: handling possible serial event
gdbserver: Writing resume reply for LWP 11089.11089:0
gdbserver: handling possible serial event
gdbserver: GDBserver exiting
GDB: Packet received: OK
GDB: infrun: prepare_to_wait
GDB: Sending packet: $vStopped#55...Packet received: W0;process:2b51
GDB: Sending packet: $vStopped#55...Packet received: OK
GDB: infrun: target_wait (-1.0.0, status) =
GDB: infrun: -1.0.0 [Thread 0],
GDB: infrun: status->kind = no-resumed
GDB: Sending packet: $Hgp2b51.2b51#41...Remote connection closed
(gdb) FAIL: gdb.threads/continue-pending-after-query.exp: iter 1: continue until exit
Notice the "Packet received: W0;process:2b51" followed by
vStopped->OK.
That means the process exit notification was successfully sent to GDB
and GDB fetched it. That makes gdbserver exit, in
server.c:process_serial_event:
if (!extended_protocol && have_ran && !target_running ())
{
/* In non-stop, defer exiting until GDB had a chance to query
the whole vStopped list (until it gets an OK). */
if (QUEUE_is_empty (notif_event_p, notif_stop.queue))
{
/* Be transparent when GDB is connected through stdio -- no
need to spam GDB's console. */
if (!remote_connection_is_stdio ())
fprintf (stderr, "GDBserver exiting\n");
remote_close ();
exit (0);
}
}
However, GDB is still busy processing an earlier "no-resumed" event,
and sends a "Hg" packet, which errors out with "Remote connection
closed". IOW, it's not enough to wait for GDB to query the whole
vStopped list, gdbserver needs to wait until the exit event is really
processed.
The fix is to make gdbserver not disconnect until gdb does.
Tested on x86_64 Fedora, native gdbserver, remote + extended-remote +
with and without "maint set target-non-stop on".
gdb/gdbserver/ChangeLog:
2015-10-14 Pedro Alves <palves@redhat.com>
* remote-utils.c (readchar): Don't print "Got EOF" unless
debugging gdbserver.
* server.c (captured_main): Exit gdbserver if gdb disconnects when
in "target remote" mode and there are no processes left to debug.
(process_serial_event): Remove 'have_ran' static local and remove
logic that exits gdbserver in "target remote" mode.
Running killed-outside.exp in with "maint set target-non-stop on"
hangs currently. This test has the inferior process die with a
SIGKILL while stopped. gdbserver gets a SIGCHLD and reacts by
retrieveing the SIGKILL events out of waitpid. But because the
process is not resumed from GDB's perspective, the event is left
pending. When GDB resumes the process afterwards, the process is not
really resumed because it already has the event pending. But nothing
wakes up the event loop to consume the event.
Handle this in the same way nat/linux-nat.c:linux_nat_resume handles
this.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_resume): Wake up the event loop before
returning.
Say GDB wants to access the inferior process's memory. The current
remote general thread is 3, but GDB's switched to thread 2. Because
both threads are of the same process, GDB skips making the remote
thread be thread 2 as well (sending an Hg packet) before accessing
memory (remote.c:set_general_process). However, if thread 3 has
exited meanwhile, thread 3 no longer exists on the server and
gdbserver points current_thread to NULL. The result is the memory
access fails, even through the process still exists.
Fix this by making prepare_to_access memory select the thread to
access memory through.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* mem-break.c (check_gdb_bp_preconditions): Remove current_thread
check.
(set_gdb_breakpoint): If prepare_to_access_memory fails, set *ERR
to -1.
* target.c (struct thread_search): New structure.
(thread_search_callback): New function.
(prev_general_thread): New global.
(prepare_to_access_memory, done_accessing_memory): New functions.
* target.h (prepare_to_access_memory, done_accessing_memory):
Replace macros with function declarations.
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
killed-outside.exp regresses with "maint set target-non-stop on". The
logs show:
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (Thread 9028.9028)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming Thread 9028.9028
Sending packet: $Z0,3615a03966,1#4b... Notification received: Stop:X9;process:2344
Packet received: E01
Sending packet: $Z0,3615a13970,1#47...Packet received: E01
Sending packet: $Z0,3615a14891,1#4a...Packet received: E01
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 9028.9028] at 0x4005e4
Sending packet: $vCont;c:p2344.2344#1a...Packet received: E.target not running.
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n</threads>\n
Sending packet: $vStopped#55...Packet received: OK
Unexpected vCont reply in non-stop mode: E.target not running.
(gdb) remote_async_inferior_event_handler
infrun: target_wait (-1.0.0, status) =
infrun: 9028.0.0 [process 9028],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
infrun: clear_step_over_info
infrun: stop_all_threads
remote_thread_exit_events(1)
Note the "Unexpected vCont reply" error.
I traced it to a problem in status_pending_p_callback. It resumes an
LWP when it shouldn't.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (thread_still_has_status_pending_p): Don't check
vCont;t here.
(lwp_resumed): New function.
(status_pending_p_callback): Return early if the LWP is not
supposed to be resumed.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
Running attach-many-short-lived-threads.exp with the extended-remote
board with "maint set target-non-stop on" times out -- the attach
never completes. Enabling infrun debug logs, we see that GDB is stuck
stopping all threads:
infrun: target_wait (-1.0.0, status) =
infrun: 1639.22213.0 [Thread 1639.22213],
infrun: status->kind = stopped, signal = GDB_SIGNAL_0
infrun: Thread 1639.22260 not executing
infrun: Thread 1639.22256 not executing
infrun: Thread 1639.22258 not executing
infrun: Thread 1639.22257 not executing
infrun: Thread 1639.22259 not executing
infrun: Thread 1639.22255 not executing
infrun: Thread 1639.22253 executing, already stopping
infrun: Thread 1639.22251 executing, already stopping
infrun: Thread 1639.22252 executing, already stopping
infrun: Thread 1639.22250 executing, already stopping
infrun: Thread 1639.22254 executing, already stopping
infrun: Thread 1639.22247 executing, already stopping
infrun: Thread 1639.22213 not executing
infrun: Thread 1639.22207 not executing
infrun: Thread 1639.22201 not executing
infrun: Thread 1639.22219 not executing
infrun: Thread 1639.1639 not executing
** HANG HERE **
GDB is waiting for the stop replies of any of those "already stopping"
threads. Take 22253 for example. On the gdbserver logs we see:
...
resume_stop request for LWP 22253
stopping LWP 22253
Sending sigstop to lwp 22253
linux_resume done
...
and:
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x80000001): status(3057f), 22253
LWFE: waitpid(-1, ...) returned 22253, ERRNO-OK
LLW: waitpid 22253 received Trace/breakpoint trap (stopped)
pc is 0x3615ef4ce1
HEW: Got clone event from LWP 22253, new child is LWP 22259
but from here on, we never see any other event for LWP 22253. In
particular, we never see the expected SIGSTOP (from "Sending sigstop"
above). The issue is that linux_resume_stopped_resumed_lwps never
re-resumes the 22253 after the clone event.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (resume_stopped_resumed_lwps): Don't check whether
the thread's last_resume_kind was resume_stop.
With "maint set target-non-stop on", the attach tests occasionally
crash gdbserver.
Basically, gdb attaches with vAttach;PID, and then shortly after reads
the xml target description for that process, to figure out the
process' architecture. On the gdbserver side, the target description
is only filled in when the first process/thread in the thread group
reports its initial PTRACE_ATTACH SIGSTOP. So if GDB is fast enough,
it can read the target description _before_ that initial stop, and
then gdbserver dies dereferencing a NULL tdesc pointer.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_attach): In non-stop mode, wait for one stop
before returning.
There's currently no non-stop equivalent of the all-stop ^C (\003)
"packet" that GDB sends when a ctrl-c is pressed while a foreground
command is active. There's vCont;t, but that's defined to cause a
"signal 0" stop.
This fixes many tests that type ^C, when testing with extended-remote
with "maint set target-non-stop on". E.g.:
Continuing.
talk to me baby
PASS: gdb.base/interrupt.exp: process is alive
a
a
PASS: gdb.base/interrupt.exp: child process ate our char
^C
[Thread 22730.22730] #1 stopped.
0x0000003615ee6650 in __read_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
(gdb) FAIL: gdb.base/interrupt.exp: send_gdb control C
p func1 ()
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New remote packets): Mention vCtrlC.
* remote.c (PACKET_vCtrlC): New enum value.
(async_remote_interrupt): Call target_interrupt instead of
target_stop.
(remote_interrupt_as): Remove 'ptid' parameter.
(remote_interrupt_ns): New function.
(remote_stop): Adjust.
(remote_interrupt): If the target is in non-stop mode, try
interrupting with vCtrlC.
(initialize_remote): Install set remote ctrl-c packet.
gdb/doc/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Bootstrapping): Add "interrupting remote targets"
anchor.
(Packets): Document vCtrlC.
gdb/gdbserver/
2015-11-30 Pedro Alves <palves@redhat.com>
* server.c (handle_v_requests): Handle vCtrlC.
This fixes a gdbserver crash when running
gdb.threads/non-ldr-exc-1.exp with "maint set target-non-stop on".
The problem is that qSymbol is called when gdbserver has
current_thread == NULL.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (find_any_thread_of_pid): Declare.
* inferiors.c (thread_of_pid, find_any_thread_of_pid): New
functions.
* server.c (handle_query): If current_thread is NULL, look for
another thread of the selected process.
This patch adds support for thread names in the remote protocol, and
updates gdb/gdbserver to use it. The information is added to the XML
description sent in response to the qXfer:threads:read packet.
gdb/ChangeLog:
* linux-nat.c (linux_nat_thread_name): Replace implementation by call
to linux_proc_tid_get_name.
* nat/linux-procfs.c (linux_proc_tid_get_name): New function,
implementation inspired by linux_nat_thread_name.
* nat/linux-procfs.h (linux_proc_tid_get_name): New declaration.
* remote.c (struct private_thread_info) <name>: New field.
(free_private_thread_info): Free name field.
(remote_thread_name): New function.
(thread_item_t) <name>: New field.
(clear_threads_listing_context): Free name field.
(start_thread): Get name xml attribute.
(thread_attributes): Add "name" attribute.
(remote_update_thread_list): Copy name field.
(init_remote_ops): Assign remote_thread_name callback.
* target.h (target_thread_name): Update comment.
* NEWS: Mention remote thread name support.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_target_ops): Use linux_proc_tid_get_name.
* server.c (handle_qxfer_threads_worker): Refactor to include thread
name in reply.
* target.h (struct target_ops) <thread_name>: New field.
(target_thread_name): New macro.
gdb/doc/ChangeLog:
* gdb.texinfo (Thread List Format): Mention thread names.
This crash is observable by debugging a threaded program on LynxOS.
On the GDB side, this is what we would see:
% gdb q
(gdb) target remote machine:4444
(gdb) break q.adb:6
(gdb) cont
[gdb hits breakpoint]
(gdb) cont
Remote connection closed <<<--- expected: [Inferior 1 (Remote target) exited normally]
On the gdbserver side, which was launched as usual:
% gdbserver --once :4444 q
Segmentation fault (core dumped)
Ooops!
The problem happens while GDB is trying to handle the thread termination
event of the thread that hit the breakpoint. It started happening after
the following change was made:
commit 96e7a1eb6d
Date: Fri Oct 16 11:08:38 2015 -0400
Subject: gdbserver: Reset current_thread when the thread is removed.
Reset current_thread and make sure 'remove_process' is used
after all associated threads have been removed first.
More precisely:
. GDBserver receives the execution-resume order;
. lynx-low resumes it succesfully, and then relies on lynx_wait_1
to wait for the next event;
. We quickly receive one, which lynx_wait_1 analyzes to be
a "thread exit" event, and therefore does...
case SIGTHREADEXIT:
remove_thread (find_thread_ptid (new_ptid));
lynx_continue (new_ptid);
goto retry;
=> remove_thread causes current_thread to be set to NULL...
(that's the recent change mentioned above)
=> ... which causes problems during lynx_continue, because
it calls lynx_resume, which calls regcache_invalidate,
which unfortunately assumes that CURRENT_THREAD is not NULL:
void
regcache_invalidate (void)
{
/* Only update the threads of the current process. */
SEGV!--> int pid = ptid_get_pid (current_thread->entry.id);
find_inferior (&all_threads, regcache_invalidate_one, &pid);
}
Since the problem at hand is caused by trying to figure out which
inferior to reset the regcache for, and since lynx_resume actually
had that info, this patch fixes the problem by introducing a new
routine called regcache_invalidate_pid, which invalidates the cache
of the given pid; and then modifies lynx_resume use that new routine
rather than relying on regcache_invalidate to invalidate the regcache
of the expected inferior.
gdb/gdbserver/ChangeLog:
* regcache.h (regcache_invalidate_pid): Add declaration.
* regcache.c (regcache_invalidate_pid): New function, extracted
from regcache_invalidate.
(regcache_invalidate): Reimplement using regcache_invalidate_pid.
Add trivial documentation comment.
* lynx-low.c: Use regcache_invalidate_pid instead of
regcache_invalidate.
See the comment added in configure.ac for more details behind
this change.
gdb/gdbserver/ChangeLog:
* configure.ac: Do not call AC_CHECK_TYPES for Elf32_auxv_t
and Elf64_auxv_t if the target is Android.
The target_process_qsupported method is called for each qSupported
feature that the common code does not recognize. The only current
implementation, for x86 Linux (x86_linux_process_qsupported), assumes
that it either is called with the "xmlRegisters=i386" feature, or that
it is isn't called at all, indicating the connected GDB predates x86
XML descriptions.
That's a bad assumption however. If GDB sends in a new/unknown (to
core gdbserver) feature after "xmlRegisters=i386", say, something like
qSupported:xmlRegisters=i386;UnknownFeature+, then when
target_process_qsupported is called for "UnknownFeature+",
x86_linux_process_qsupported clears the 'use_xml' global and calls
x86_linux_update_xmltarget, and gdbserver ends up _not_ reporting a
XML description...
This commit changes the target_process_qsupported API to instead pass
down a vector of unprocessed qSupported features in one go.
(There's an early call to target_process_qsupported(NULL) that
indicates "starting qSupported processing". There's no matching call
to mark the end of processing, though. I first fixed this by passing
(char *)-1 to indicate that, and adjusted the x86 backend to only
clear 'use_xml' when qSupported processing starts, and then only call
x86_linux_update_xmltarget() when (char *)-1 was passed. However, I
wasn't that happy with the hack and came up this alternative version.)
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_process_qsupported): Change prototype.
Adjust.
* linux-low.h (struct linux_target_ops) <process_qsupported>:
Change prototype.
* linux-x86-low.c (x86_linux_process_qsupported): Change prototype
and adjust to loop over all features.
* server.c (handle_query) <qSupported>: Adjust to call
target_process_qsupported once, passing it a vector of unprocessed
features.
* target.h (struct target_ops) <process_qsupported>: Change
prototype.
(target_process_qsupported): Adjust.
Both x86_64 GNU/Linux and x86_64 mingw-w64 build cleanly with
--enable-targets=all. This enables -Werror by default in C++ mode
too, in order to let the buildbot catch C++ build regressions for us.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
Both x86_64 GNU/Linux and x86_64 mingw-w64 build cleanly with
--enable-targets=all. Let's drop the -fpermissive hack, in order to
let the buildbot catch C++ build regressions for us.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Remove -fpermissive.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
The patch fixes the following errors in C++ build,
gdb/gdbserver/linux-aarch64-low.c: In function 'int emit_data_processing(uint32_t*, aarch64_opcodes, aarch64_register, aarch64_register, aarch64_operand)':
gdb/gdbserver/linux-aarch64-low.c:1071:52: error: invalid conversion from 'unsigned int' to 'aarch64_opcodes' [-fpermissive]
return emit_data_processing_reg (buf, opcode | operand_opcode, rd,
^
gdb/gdbserver:
2015-11-19 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (emit_data_processing_reg): Change opcode
type to uint32_t.
This patch moves the enum definition out of the scope of struct, and
fixes the following error.
gdb/gdbserver/linux-aarch64-low.c:681:18: error: 'OPERAND_REGISTER' was not declared in this scope
operand.type = OPERAND_REGISTER;
^
gdb/gdbserver:
2015-11-19 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (enum aarch64_operand_type): New.
(struct aarch64_operand): Move enum out.
Commit 91ee7171d0 (MinGW and attribute format(printf/gnu_printf))
made common/common-defs.h depend on gnulib's substitute headers.
Turns out that that broke the gdbserver/ipa build (as the buildbots
discovered) because nothing is making sure that gnulib is built before
the ipa is.
gdb/gdbserver/ChangeLog:
2015-11-18 Pedro Alves <palves@redhat.com>
* Makefile.in (all_object_files): Add $IPA_OBJS.
Building in C++ caught a buglet here:
../../../src/gdb/gdbserver/win32-low.c: In function 'void win32_resume(thread_resume*, size_t)':
../../../src/gdb/gdbserver/win32-low.c:929:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = resume_info[0].sig;
^
../../../src/gdb/gdbserver/win32-low.c:934:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = 0;
^
Signals in the "struct thread_resume" structure are host signals, not
gdb signals. The current code happens to work because the only
signals that the Windows port supports have the same number as the gdb
equivalent (see handle_exception for the win32 exception -> gdb signal
mapping).
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (win32_resume): Use gdb_signal_from_host,
GDB_SIGNAL_0 and gdb_signal_to_string.
Fixes:
../../../src/gdb/gdbserver/win32-low.c: In function 'int win32_kill(int)':
../../../src/gdb/gdbserver/win32-low.c:823:46: error: invalid conversion from 'int' to 'target_waitkind' [-fpermissive]
struct target_waitstatus our_status = { 0 };
^
handle_output_debug_string doesn't use the parameter for anything
(it's an output parameter in the gdb version), so just remove it.
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (handle_output_debug_string): Remove parameter.
(win32_kill): Remove our_status local and adjust call to
handle_output_debug_string.
(get_child_debug_event): Adjust call to
handle_output_debug_string.
Fixes
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-mips-low.c: In function ‘void mips_add_watchpoint(arch_process_info*, CORE_ADDR, int, int)’:
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-mips-low.c:368:19: error: invalid conversion from ‘int’ to ‘target_hw_bp_type’ [-fpermissive]
new_watch->type = watch_type;
^
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (mips_linux_new_thread): Change type of
watch_type to enum target_hw_bp_type.
Trivial casts for C++.
Fixes things like
In file included from /home/simark/src/binutils-gdb/gdb/gdbserver/../common/common-defs.h:39:0,
from /home/simark/src/binutils-gdb/gdb/gdbserver/server.h:22,
from /home/simark/src/binutils-gdb/gdb/gdbserver/linux-arm-low.c:19:
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-arm-low.c: In function ‘int arm_get_hwcap(long unsigned int*)’:
/home/simark/src/binutils-gdb/gdb/gdbserver/../../include/libiberty.h:711:38: error: invalid conversion from ‘void*’ to ‘unsigned char*’ [-fpermissive]
# define alloca(x) __builtin_alloca(x)
^
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-arm-low.c:807:25: note: in expansion of macro ‘alloca’
unsigned char *data = alloca (8);
^
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (arm_fill_gregset): Add cast.
(arm_store_gregset): Likewise.
* linux-arm-low.c (arm_get_hwcap): Likewise.
(arm_read_description): Likewise.
g++ doesn't like that we forward-declare a variable that is initialized
later in the file. It's easy enough to re-order things to fix it.
Fixes
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-ppc-low.c:663:28: error: redefinition of ‘usrregs_info ppc_usrregs_info’
static struct usrregs_info ppc_usrregs_info =
^
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-ppc-low.c:381:28: note: ‘usrregs_info ppc_usrregs_info’ previously declared here
static struct usrregs_info ppc_usrregs_info;
^
gdb/gdbserver/ChangeLog:
* linux-ppc-low.c (ppc_usrregs_info): Remove
forward-declaration.
(ppc_arch_setup): Move lower in file.
Fixes on i386:
../../../binutils-gdb/gdb/gdbserver/proc-service.c: In function ps_pdread:
../../../binutils-gdb/gdb/gdbserver/proc-service.c:83:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
../../../binutils-gdb/gdb/gdbserver/proc-service.c: In function ps_pdwrite:
../../../binutils-gdb/gdb/gdbserver/proc-service.c:93:30: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
I could have kept both casts:
(CORE_ADDR) (uintptr_t) addr
but it's cleaner this way. The uintptr_t implicitely gets promoted to a
CORE_ADDR, which is at least as long as uintptr_t.
gdb/gdbserver/ChangeLog:
* proc-service.c (ps_pdread): Change CORE_ADDR cast to uintptr_t.
(ps_pdwrite): Likewise.