This reverts commit 62e77f56f0.
(except for ChangeLog and a bugfix in minimal_symbol_reader::install)
As agreed on the mailing list, now that GDB 9 has branched, this patch
reverts the change to set worker-threads to zero. After this patch,
multithreaded minsym demangling will be enabled again by default.
gdb/ChangeLog:
2019-12-13 Christian Biesinger <cbiesinger@google.com>
* maint.c (n_worker_threads): Default to -1.
(worker_threads_disabled): Remove function.
* maint.h (worker_threads_disabled): Remove function.
* minsyms.c (minimal_symbol_reader::record_full): Don't call
symbol_set_names here if worker_threads_disabled () is true.
Change-Id: I5ff3e318d96f60968c8b8bedb84546ad2314d94b
ARI has a check for multiple calls to warning or error, suggesting
that they be combined into a single call. This triggers at three
places in gdb -- throw_bad_regnum_error, guile_repl_command, and the
end of value_cast -- and after examining these, I think they all make
sense as-is. Instead, it makes sense to remove this check from ARI.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove check for multiple calls to
warning or error.
Change-Id: I0618683623a3c7324460c7b9e5d7f252d88c2e8d
ARI has a "fix" call for "long long", but this call is incorrect.
This patch removes it.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove call to "fix" for "long long".
Change-Id: I97bca2dc04b579fcf7c9dba7fe7fd939451bcefa
This adds -Wno- support to ARI, so that warnings can be disabled
selectively. I use this to ignore "deprecated" warnings.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Handle -Wno- prefix.
Change-Id: I6919faedf920e857df4f597df66f0ba3943e0eac
This changes the ARI usage text to use the GNU style for
"metasyntactic variables".
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh (usage): Use GNU style.
Change-Id: Ibe5a867571382d2985d1b8b78dfef3ddd02291ff
A few spots can validly call vsprintf; this adds ARI markers to
suppress warnings at these places.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* gdbsupport/common-utils.c (string_printf, string_vprintf)
(string_vappendf): Add ARI comment.
Change-Id: Ia8665aa5d7b7331a3985b18626b19764a264447b
This silences ARI at the one spot that is permitted to call
floatformat_to_double, and also removes the corresponding "fix" call
from gdb_ari.sh -- it was incorrect, and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for
floatformat_to_double.
* target-float.c (host_float_ops<T>::from_target): Add ARI
comment.
Change-Id: I778a17a04da417c113194004dd7de3b1df381266
There are a handful of spots in gdb that validly call abort. This
patch adds the appropriate ARI marker to these lines, to silence the
ARI report. This also removes the "fix" call for "abort" from
gdb_ari.sh; it was incorrect and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for abort.
* utils.c (abort_with_message, dump_core, internal_vproblem): Add
ARI marker to abort.
* event-top.c (handle_sigsegv): Add ARI marker to abort.
Change-Id: I09ce6aa5010bbe4e5bb73ffdb727481be39d34d6
ARI reports the wrong substitution for floatformat_from_double.
"floatformat_from_doublest" was renamed in 2017.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Fix floatformat_from_double text.
Change-Id: Ibf1b194ea509b12ae8bc30ce285c809c96218557
The text for the ATTRIBUTE_UNUSED check in ARI is plainly incorrect
now -- gdb does in fact use ATTRIBUTE_UNUSED, and there's no issue in
doing so, when done properly.
This patch removes this check.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove ATTRIBUTE_UNUSED check.
Change-Id: I13fd8e9b40dbaab3978dbf9b6c4228b62299d944
The "boolean" and "var_boolean" checks from ARI seem only to generate
false reports.
Now that gdb is in C++, at least the "boolean" check seems unlikely to
ever generate a true report.
The "var_boolean" check likewise doesn't seem valuable any more --
presumably this refers to some ancient way of doing things in gdb, and
isn't likely to find a bug in the future.
Therefore, this patch removes these two checks.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "boolean" and "var_boolean"
checks.
Change-Id: Iaf449b51e8182ffa0b9ed25fe688e0ff64a07a67
The Solaris buildbot builder complained about some recent patches of
mine. Building with GCC 7 failed.
This patch fixes the bug. I'm checking it in.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* gdbsupport/safe-iterator.h (class basic_safe_range) <begin,
end>: No longer "const".
Change-Id: I5f428fab61087f467ac3b6475f4ef4dbd314fcb0
Many places in this file use spaces only for indentation. Fix them to
conform to GNU style.
gdb/ChangeLog:
* jit.c: Fix indentation, replace spaces with tabs where
applicable.
This enables support for the msp430-elfbare target being added to GCC.
gdb/ChangeLog:
2019-12-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* configure.tgt: Match msp430-*-elf* targets when configuring GDB.
PR 25237
* elf.c (assign_file_positions_for_load_sections): Attempt to
keep meaningless p_offset for PT_LOAD segments without file
contents within file size.
A plan I had a while ago was to write the DWARF index in a worker
thread. This is why objfile::partial_symtabs is a shared_ptr.
However, it turned out that doing this required keeping the objfile
alive as well. Now that objfiles are managed using shared_ptr,
there's no need for partial_symtabs to be one as well, so this patch
reverts that change.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile) <partial_symtabs>: Now a
unique_ptr.
Change-Id: I3d7831006c40d4c8f3173ba51c0c1b0a32021ae5
This changes objfiles to be managed using a shared_ptr. shared_ptr is
chosen because it enables the use of objfiles in background threads.
The simplest way to do this was to introduce a new iterator that will
return the underlying objfile, rather than a shared_ptr. (I also
tried changing the rest of gdb to use shared_ptr, but this was quite
large; and to using intrusive reference counting, but this also was
tricky.)
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (objfile_list): New typedef.
(class unwrapping_objfile_iterator)
(struct unwrapping_objfile_range): Newl
(struct program_space) <objfiles_range>: Change type.
<objfiles>: Change return type.
<add_objfile>: Change type of "objfile" parameter.
<objfiles_list>: Now a list of shared_ptr.
* progspace.c (program_space::add_objfile): Change type of
"objfile". Update.
(program_space::remove_objfile): Update.
* objfiles.h (struct objfile) <~objfile>: Make public.
* objfiles.c (objfile::make): Update.
(objfile::unlink): Don't call delete.
Change-Id: I6fb7fbf06efb7cb7474c525908365863eae27eb3
This changes free_all_objfiles to be a method on program_space, in
line with the other changes to treat program_space as a container for
objfiles.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_clear): Update.
* progspace.h (struct program_space) <free_all_objfiles>: Declare
method.
* progspace.c (program_space::free_all_objfiles): New method.
* objfiles.h (free_all_objfiles): Don't declare.
* objfiles.c (free_all_objfiles): Move to program_space.
Change-Id: I908b549d2981b6005f7ca181fc0e6d24fc8b7b6f
This introduces the basic_safe_range class, which can be used to
create a basic_safe_iterator. This also changes basic_safe_iterator
in two ways.
First, it simplifies the constructor. This seemed unnecessarily
complicated to me, and keeping it this way would prevent the second
change...
... which is to add a second constructor for initializing the
one-past-the-end iterator that is stored in basic_safe_iterator.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* gdbsupport/safe-iterator.h (basic_safe_iterator): Simplify. Add
second constructor.
(basic_safe_range): New class.
Change-Id: Ib351ef6fd435129a5053c64e5561877e1459ab37
This removes the MULTI_OBJFILE_P macro in favor of a method on the
program space.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.c (program_space::multi_objfile_p): New method.
* printcmd.c (info_symbol_command): Update.
* maint.c (maintenance_translate_address): Update.
* objfiles.h (MULTI_OBJFILE_P): Remove.
* progspace.h (struct program_space) <multi_objfile_p>: New
method.
Change-Id: I2779e26ea8909078d63fea8f13bce94cab73948c
This introduces a new method, program_space::remove_objfile, and
changes the objfile destructor not to unlink an objfile from the
program space's list.
This is cleaner because, like the previous patch, it treats the
program space more like a container for objfiles. Also, this makes it
possible to keep an objfile alive even though it has been unlinked
from the program space's list, which is important for processing in a
worker thread.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <remove_objfile>: Declare.
* progspace.c (program_space::remove_objfile): New method.
* objfiles.c (unlink_objfile): Remove.
(objfile::unlink): Call remove_objfile.
(objfile): Don't call unlink_objfile.
Change-Id: I22f768827723dce21886fae9b3664532c8349e68
This introduces a new method, program_space::add_objfile, that adds an
objfile to the program space's list of objfiles. It also changes the
obfile's constructor so that linking an objfile into this list is not
done here.
The former is an improvement because it makes more sense to treat the
program space as a container holding objfiles -- so manipulation of
the list belongs there.
The latter is not strictly needed, but seemed better both because it
is removing a global side effect from a constructor, and for symmetry
reasons, as a subsequent patch will remove unlinking from the
destructor.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <add_objfile>: Declare
method.
* progspace.c (program_space::add_objfile): New method.
* objfiles.c (~objfile): Don't unlink objfile.
(put_objfile_before): Remove.
(add_separate_debug_objfile): Don't call put_objfile_before.
(objfile::make): Call add_objfile. Set new_objfiles_available on
the per-program-space data.
Change-Id: I93e8525dda631cb89dcc2046a5c51c7c9f34ccfd
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Change-Id: I934bee70b26b8b24e1735828fb1e60fe8a05714f
This changes objfile::make to take a "parent" parameter, and makes
add_separate_debug_objfile static.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Pass "parent" to
objfile::make.
* objfiles.h (struct objjfile) <make>: No longer inline.
(add_separate_debug_objfile): Don't declare.
* objfiles.c (add_separate_debug_objfile): Now static.
(objfile::make): Move from objfiles.h. Call
add_separate_debug_objfile. Add "parent" parameter.
Change-Id: I631f43bb71738dea6ae0697317bf8ef4a0db4617
This changes the objfile constructor to be private, changing the
callers to use a factory method. This isn't perhaps strictly needed
for the goal of this series -- changing the container model of
objfiles -- but is a nice symmetry.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Use objfile::make.
* objfiles.h (struct objfile): Make constructor private.
<make>: New static method.
* jit.c (jit_object_close_impl): Update.
Change-Id: I42e07bc80a88cf3322ace94ffe869ae5788bcb29
Similar to SP, BP, SI and DI registers, R12-R15 registers must use REX
prefix for the low byte register when optimizing
test $imm7, %r64/%r32/%r16 -> test $imm7, %r8
PR gas/25274
* config/tc-i386.c (optimize_encoding): Also check R12-R15
registers for "test $imm7, %r64/%r32/%r16 -> test $imm7, %r8"
optimization.
* testsuite/gas/i386/x86-64-optimize-3.s: Add tests for test
with r12.
* testsuite/gas/i386/x86-64-optimize-3.d: Updated.
* testsuite/gas/i386/x86-64-optimize-3b.d: Likewise.
Add 3 command-line options to align branches within a fixed boundary
with segment prefixes or NOPs:
1. -malign-branch-boundary=NUM aligns branches within NUM byte boundary.
2. -malign-branch=TYPE[+TYPE...] specifies types of branches to align.
The supported branches are:
a. Conditional jump.
b. Fused conditional jump.
c. Unconditional jump.
d. Call.
e. Ret.
f. Indirect jump and call.
3. -malign-branch-prefix-size=NUM aligns branches with NUM segment
prefixes per instruction.
3 new rs_machine_dependent frag types are added:
1. BRANCH_PADDING. The variable size frag to insert NOP before branch.
2. BRANCH_PREFIX. The variable size frag to insert segment prefixes to
an instruction. The choices of prefixes are:
a. Use the existing segment prefix if there is one.
b. Use CS segment prefix in 64-bit mode.
c. In 32-bit mode, use SS segment prefix with ESP/EBP base register
and use DS segment prefix without ESP/EBP base register.
3. FUSED_JCC_PADDING. The variable size frag to insert NOP before fused
conditional jump.
The new rs_machine_dependent frags aren't inserted if the previous item
is a prefix or a constant directive, which may be used to hardcode an
instruction, since there is no clear instruction boundary. Segment
prefixes and NOP padding are disabled before relaxable TLS relocations
and tls_get_addr calls to keep TLS instruction sequence unchanged.
md_estimate_size_before_relax() and i386_generic_table_relax_frag() are
used to handled BRANCH_PADDING, BRANCH_PREFIX and FUSED_JCC_PADDING frags.
i386_generic_table_relax_frag() grows or shrinks sizes of segment prefix
and NOP to align the next branch frag:
1. First try to add segment prefixes to instructions before a branch.
2. If there is no sufficient room to add segment prefixes, NOP will be
inserted before a branch.
* config/tc-i386.c (_i386_insn): Add has_gotpc_tls_reloc.
(tls_get_addr): New.
(last_insn): New.
(align_branch_power): New.
(align_branch_kind): New.
(align_branch_bit): New.
(align_branch): New.
(MAX_FUSED_JCC_PADDING_SIZE): New.
(align_branch_prefix_size): New.
(BRANCH_PADDING): New.
(BRANCH_PREFIX): New.
(FUSED_JCC_PADDING): New.
(i386_generate_nops): Support BRANCH_PADDING and FUSED_JCC_PADDING.
(md_begin): Abort if align_branch_prefix_size <
MAX_FUSED_JCC_PADDING_SIZE.
(md_assemble): Set last_insn.
(maybe_fused_with_jcc_p): New.
(add_fused_jcc_padding_frag_p): New.
(add_branch_prefix_frag_p): New.
(add_branch_padding_frag_p): New.
(output_insn): Generate a BRANCH_PADDING, FUSED_JCC_PADDING or
BRANCH_PREFIX frag and terminate each frag to align branches.
(output_disp): Set i.has_gotpc_tls_reloc to TRUE for GOTPC and
relaxable TLS relocations.
(output_imm): Likewise.
(i386_next_non_empty_frag): New.
(i386_next_jcc_frag): New.
(i386_classify_machine_dependent_frag): New.
(i386_branch_padding_size): New.
(i386_generic_table_relax_frag): New.
(md_estimate_size_before_relax): Handle COND_JUMP_PADDING,
FUSED_JCC_PADDING and COND_JUMP_PREFIX frags.
(md_convert_frag): Handle BRANCH_PADDING, BRANCH_PREFIX and
FUSED_JCC_PADDING frags.
(OPTION_MALIGN_BRANCH_BOUNDARY): New.
(OPTION_MALIGN_BRANCH_PREFIX_SIZE): New.
(OPTION_MALIGN_BRANCH): New.
(md_longopts): Add -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_parse_option): Handle -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_show_usage): Display -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(i386_target_format): Set tls_get_addr.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
(i386_generic_table_relax_frag): New.
(md_generic_table_relax_frag): New.
(i386_tc_frag_data): Add u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
(TC_FRAG_INIT): Initialize u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
* doc/c-i386.texi: Document -malign-branch-boundary=,
-malign-branch= and -malign-branch-prefix-size=.
Add md_generic_table_relax_frag for TC_GENERIC_RELAX_TABLE targets so
that a backend can extend relax_frag beyond TC_GENERIC_RELAX_TABLE.
* write.c (md_generic_table_relax_frag): New. Defined to
relax_frag if not defined.
(relax_segment): Call md_generic_table_relax_frag instead of
relax_frag.
I'm currently studying that code and noticed this manual memory
management, which could easily be replaced with a vector, so here it is.
gdb/ChangeLog:
* jit.c (jit_reader_try_read_symtab): Replace xmalloc/xfree with
gdb::byte_vector.
I noticed a couple of spots that call malloc_failure, but that don't
need to.
* In xml-support.c, "concat" uses xmalloc, so cannot return NULL.
* In utils.c, "buildargv" also uses xmalloc, so can only return NULL
if the argument is empty.
Tested by the buildbot.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* xml-support.c (xml_fetch_content_from_file): Don't call
malloc_failure.
* utils.h (class gdb_argv): Remove malloc_failure comment.
* utils.c (gdb_argv::reset): Don't call malloc_failure.
Change-Id: I59483620deb6609ccf2f024d94a29113bb62d1a9
This adds Ravenscar support to gdb for RISC-V targets.
This was tested internally using AdaCore's test suite and qemu.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* Makefile.in (ALL_TARGET_OBS): Add riscv-ravenscar-thread.o.
(HFILES_NO_SRCDIR): Add riscv-ravenscar-thread.h.
(ALLDEPFILES): Add riscv-ravenscar-thread.c.
* configure.tgt (riscv-*-*): Add riscv-ravenscar-thread.o.
* riscv-ravenscar-thread.c: New file.
* riscv-ravenscar-thread.h: New file.
* riscv-tdep.c (riscv_gdbarch_init): Call
register_riscv_ravenscar_ops.
Change-Id: Ic47a3b3cfbbe80c2c82a5f48d2e0481845cac8b0
A recent commit removed DIAGNOSTIC_IGNORE_UNUSED_FUNCTION, which was
used in thread-pool.c. This patch changes this code to use
ATTRIBUTE_UNUSED instead.
Tested by rebuilding.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* gdbsupport/thread-pool.c (set_thread_name): Use
ATTRIBUTE_UNUSED.
Change-Id: I56d46eaac73690565d0e52db1791411567a918dd
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
This is likely the result of PR64079 in GCC, which was fixed by commit
9e96f1e1b9731c4e1ef4fbbbf0997319973f0537.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
include/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_FUNCTION). Remove
definitions.
Change-Id: Iad6123d61d76d111e3ef8d24aa8c60112304c749
This started out as fixing decode_16, which used a char to index a 256
byte decodings array. When char is signed that could result in an out
of bounds array access. The rest of the patch is for consistency and
just general cleanup.
* config/obj-evax.c (crc32, encode_32, encode_16, decode_16):
Remove unnecessary prototypes.
(number_of_codings): Delete, use ARRAY_SIZE instead throughout.
(codings, decodings): Make arrays of unsigned char.
(crc32): Use unsigned variables. Delete unnecessary mask.
(encode_32, encode_16): Return unsigned char*, and make static
buffer an unsigned char array.
(decode_16): Make arg an unsigned char*. Remove useless casts.
(shorten_identifier): Use unsigned char crc_chars.
(is_truncated_identifier): Make ptr an unsigned char*.
Testing on another TUI series showed that some of the regexps in the
TUI test suite have been incorrect for a while. In particular, "|"
was meant literally in these tests, but was interpreted as pattern
alternation due to lack of quoting.
This patch fixes the bad tests. I am checking this in.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Fix regexp.
* gdb.tui/regs.exp: Fix regexps.
* gdb.tui/main.exp: Fix regexp.
Change-Id: Ib6661361171ac120bb92f4a8aec7efa4bcaa36b9
The "winheight" command resizes a specified window, resizing the other
windows in the layout to adapt. In the current code, this is done by
examining each possible layout separately. The new layout code has a
more general approach to handling this, and this patch simply removes
the old code in favor of a call into the new layout engine.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_set_win_height_command): Call
tui_adjust_window_height.
(tui_adjust_win_heights, new_height_ok): Remove.
* tui/tui-layout.h (tui_adjust_window_height): Declare.
* tui/tui-layout.c (tui_adjust_window_height): New function.
Change-Id: I6bb681375a46adc8d29fd06f581deed4e078e78a
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_resize_all): Remove code, call
tui_apply_current_layout.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
Change-Id: I3dc6c02a753d495d9ab5e8213d550a147198ce6f
This patch introduces the first use of tui_layout, by changing
show_layout to clone and use the appropriate tui_layout.
This resulted in one minor layout change, and also in the unintended
-- but good -- side effect that the title of each boxed window is now
visible.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_apply_current_layout): Declare.
* tui/tui-layout.c (standard_layouts, applied_layout): New
globals.
(tui_apply_current_layout): New function.
(show_layout): Set applied_layout. Call
tui_apply_current_layout.
(show_source_command, show_disasm_command)
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Remove.
(initialize_layouts): New function.
(_initialize_tui_layout): Call initialize_layouts.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/regs.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
* gdb.tui/basic.exp: Update.
* lib/tuiterm.exp (_check_box): Don't check bottom border.
Change-Id: If1ee06ee58f4803e8c213f4ab0f5bb59f4650ec2
This introduces a new approach to window layout for the TUI. The idea
behind this code is that a layout should be specified in a declarative
way, and then be applied by generic code that does not need to know
the specifics of every possible layout.
This patch itself does not change any behavior, because the new layout
engine isn't yet connected to anything. That is, this merely
introduces the implementation.
This generic approach makes the code more maintainable. It also
enables some future changes:
* New window types are simpler to add;
* User-specified layouts are possible; and
* Horizontal layouts are more attainable
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_base)
(class tui_layout_window, class tui_layout_split): New.
* tui/tui-layout.c (tui_get_window_by_name)
(tui_layout_window::clone, tui_layout_window::apply)
(tui_layout_window::get_sizes, tui_layout_window::add_split)
(tui_layout_split::add_window, tui_layout_split::clone)
(tui_layout_split::get_sizes)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::adjust_size, tui_layout_split::apply): New
functions.
(tui_layout_split::add_split, tui_layout_split::add_split)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::set_weights_from_heights): New functions.
Change-Id: I3a4cae666327b617d862aaa356f8179f945c6a4e
struct tui_point does not help very much. It is only used for
storage, and never passed between functions. I think it makes the
code more verbose without any corresponding benefit, so this patch
removes it.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (tui_gen_win_info::make_window): Update.
* tui/tui-win.c (tui_adjust_win_heights, tui_resize_all): Update.
* tui/tui-layout.c (tui_gen_win_info::resize): Update.
* tui/tui-data.h (struct tui_point): Remove.
(struct tui_gen_win_info) <origin>: Remove.
<x, y>: New fields.
* tui/tui-command.c (tui_cmd_window::resize): Update.
Change-Id: I3f77920585b9ea9e2b4b189f3f3ae32d4da0c252
This introduces a new method, tui_gen_win_info::min_height, to fetch
the minimum height of a window. This is used in the subsequent
unified layout patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <min_height>:
Implement.
* tui/tui-regs.h (struct tui_data_item_window) <min_height>:
Implement.
* tui/tui-data.h (struct tui_gen_win_info) <min_height>: New
method.
(struct tui_win_info) <min_height>: Implement.
Change-Id: Id33baffdf041fde072e15c1ff89b75f8b8118adb
GDB Administrator
Christian Biesinger
Tom Tromey
Simon Marchi
Jozef Lawrynowicz
Alan Modra
Tom Tromey
H.J. Lu
Luis Machado