This is one of the rare to_fetch/store_registers implementations that will
still rely (for now) on inferior_ptid (because of the memory read/write
operations). We therefore have to add a save/restore of inferior_ptid. We'll
be able to remove it when we make the memory operations accept the ptid as a
parameter.
gdb/ChangeLog:
* bsd-uthread.c (bsd_uthread_fetch_registers,
bsd_uthread_store_registers): Use ptid from regcache, set and
restore inferior_ptid.
As Gareth McMullin <gareth@blacksphere.co.nz> reports at
<https://sourceware.org/ml/gdb-patches/2017-02/msg00560.html>, the
timeout mechanism in ser-unix.c was broken by commit 048094acc
("target remote: Don't rely on immediate_quit (introduce quit
handlers)").
Instead of applying a local fix, and since we now finally always use
interrupt_select [1], let's get rid of hardwire_readchar entirely, and
use ser_base_readchar instead, which has similar timeout handling,
except for the bug.
Smoke tested with:
$ socat -d -d pty,raw,echo=0 pty,raw,echo=0
2017/03/14 14:08:13 socat[4994] N PTY is /dev/pts/14
2017/03/14 14:08:13 socat[4994] N PTY is /dev/pts/15
2017/03/14 14:08:13 socat[4994] N starting data transfer loop with FDs [3,3] and [5,5]
$ gdbserver /dev/pts/14 PROG
$ gdb PROG -ex "tar rem /dev/pts/15"
and then a few continues/ctrl-c's, plus killing gdbserver and socat.
[1] - See FIXME comments being removed.
gdb/ChangeLog:
2017-03-17 Pedro Alves <palves@redhat.com>
PR remote/21188
* ser-base.c (ser_base_wait_for): Add comment.
(do_ser_base_readchar): Improve comment based on the ser-unix.c's
version.
* ser-unix.c (hardwire_raw): Remove reference to
scb->current_timeout.
(wait_for, do_hardwire_readchar, hardwire_readchar): Delete.
(hardwire_ops): Install ser_base_readchar instead of
hardwire_readchar.
* serial.h (struct serial) <current_timeout, timeout_remaining>:
Remove fields.
Fix this the same way gdb/python/lib/gdb/printing.py handles it.
gdb/Changelog:
2017-03-17 Jonah Graham <jonah@kichwacoders.com>
PR gdb/19637
* python/lib/gdb/printer/bound_registers.py: Add support for
Python 3.
Recently I fixed a bug that caused a DW_OP_implicit_pointer with non-zero
offset into a DW_OP_implicit_value to be handled incorrectly on big-endian
targets. GDB ignored the offset and copied the wrong bytes:
https://sourceware.org/ml/gdb-patches/2017-01/msg00251.html
But there is still a similar issue when a DW_OP_implicit_pointer points
into a DW_OP_stack_value instead; and again, the offset is ignored. There
is an important difference, though: While implicit values are treated like
blocks of data and anchored at the lowest-addressed byte, stack values
traditionally contain integer numbers and are anchored at the *least
significant* byte. Also, stack values do not come in varying sizes, but
are cut down appropriately when used. Thus, on big-endian targets the
scenario looks like this (higher addresses shown right):
|<- - - - - Stack value - - - - - - ->|
| |
|<- original object ->|
|
| offset ->|####|
^^^^
de-referenced
implicit pointer
(Note how the original object's size influences the position of the
de-referenced implicit pointer within the stack value. This is not the
case for little-endian targets, where the original object starts at offset
zero within the stack value.)
This patch implements the logic indicated in the above diagram and adds an
appropriate test case. A new function dwarf2_fetch_die_type_sect_off is
added; it is used for retrieving the original object's type, so its size
can be determined. That type is passed to dwarf2_evaluate_loc_desc_full
via a new parameter.
gdb/ChangeLog:
* dwarf2loc.c (indirect_synthetic_pointer): Get data type of
pointed-to DIE and pass it to dwarf2_evaluate_loc_desc_full.
(dwarf2_evaluate_loc_desc_full): New parameter subobj_type; rename
byte_offset to subobj_byte_offset. Fix the handling of
DWARF_VALUE_STACK on big-endian targets when coming via an
implicit pointer.
(dwarf2_evaluate_loc_desc): Adjust call to
dwarf2_evaluate_loc_desc_full.
* dwarf2loc.h (dwarf2_fetch_die_type_sect_off): New declaration.
* dwarf2read.c (dwarf2_fetch_die_type_sect_off): New function.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp: Add support for DW_OP_implicit_pointer.
* gdb.dwarf2/nonvar-access.exp: Add test for stack value location
and implicit pointer into such a location.
This patch adds the support for these instructions in arm process
record.
gdb:
2017-03-16 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_record_misc): Decode CBNZ, CBZ, REV16,
and REVSH instructions.
I look at some fails in gdb.reverse/solib-precsave.exp in -mthumb,
they are caused by some bugs on decoding these three instructions,
uxtb, ldr and mrc. This patch adds unit tests against these three
instructions, and fix these bugs by re-organizing the code to match
the table in ARM ARM.
gdb:
2017-03-16 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c [GDB_SELF_TEST]: include "selftests.h".
(arm_record_test): Declare.
(_initialize_arm_tdep) [GDB_SELF_TEST]: call register_self_test.
(thumb_record_ld_st_reg_offset): Rewrite the opcode matching to
align with the manual.
(thumb_record_misc): Adjust the code order to align with the
manual.
(thumb2_record_decode_insn_handler): Fix instruction matching.
(instruction_reader_thumb): New class.
(arm_record_test): New function.
This patch adds an abstract class abstract_memory_reader a
and pass it to the code reading instructions in arm process record,
rather than using target_read_memory to read from real target. This
paves the way for adding more unit tests to arm process record.
gdb:
2017-03-16 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (abstract_memory_reader): New class.
(instruction_reader): New class.
(extract_arm_insn): Add argument 'reader'. Callers updated.
(decode_insn): Likewise.
This patch keeps the Scheme side of lazy string handling in sync
with the python size, bringing over fixes for
PRs python/17728, python/18439, python/18779.
gdb/ChangeLog:
* guile/scm-lazy-string.c (lazy_string_smob): Clarify use of LENGTH
member. Change type of TYPE member to SCM. All uses updated.
(lsscm_make_lazy_string_smob): Add assert.
(lsscm_make_lazy_string): Flag bad length values.
(lsscm_elt_type): New function.
(gdbscm_lazy_string_to_value): Rewrite to use
lsscm_safe_lazy_string_to_value.
(lsscm_safe_lazy_string_to_value): Fix handling of TYPE_CODE_PTR.
* guile/scm-value.c (gdbscm_value_to_lazy_string): Flag bad length
values. Fix TYPE_CODE_PTR. Handle TYPE_CODE_ARRAY. Handle typedefs
in incoming type.
* guile/guile-internal.h (tyscm_scm_to_type): Declare.
* guile/scm-type.c (tyscm_scm_to_type): New function.
gdb/testsuite/ChangeLog:
* gdb.guile/scm-value.c (main) Delete locals sptr, sn.
* gdb.guile/scm-lazy-string.c: New file.
* gdb.guile/scm-value.exp: Move lazy string tests to ...
* gdb.guile/scm-lazy-string.exp: ... here, new file. Add more tests
for pointer, array, typedef lazy strings.
gdb/ChangeLog:
PR python/17728, python/18439, python/18779
* python/py-lazy-string.c (lazy_string_object): Clarify use of LENGTH
member. Change type of TYPE member to PyObject *. All uses updated.
(stpy_convert_to_value): Fix handling of TYPE_CODE_PTR.
(gdbpy_create_lazy_string_object): Flag bad length values.
Handle TYPE_CODE_ARRAY with possibly different user-provided length.
Handle typedefs in incoming type.
(stpy_lazy_string_elt_type): New function.
(gdbpy_extract_lazy_string): Call it.
* python/py-value.c (valpy_lazy_string): Flag bad length values.
Fix handling of TYPE_CODE_PTR. Handle TYPE_CODE_ARRAY. Handle
typedefs in incoming type.
gdb/testsuite/ChangeLog:
PR python/17728, python/18439, python/18779
* gdb.python/py-value.c (main) Delete locals sptr, sn.
* gdb.python/py-lazy-string.c (pointer): New typedef.
(main): New locals ptr, array, typedef_ptr.
* gdb.python/py-value.exp: Move lazy string tests to ...
* gdb.python/py-lazy-string.exp: ... here. Add more tests for pointer,
array, typedef lazy strings.
When inf_ptrace_xfer_partial performs a memory transfer via ptrace with
PT_READ_I, PT_WRITE_I (aka PTRACE_PEEKTEXT, PTRACE_POKETEXT), etc., then
it currently transfers at most one word. This behavior yields degraded
performance, particularly if the caller has significant preparation work
for each invocation. And indeed it has for writing, in
memory_xfer_partial in target.c, where all of the remaining data to be
transferred is copied to a temporary buffer each time, for breakpoint
shadow handling. Thus large writes have quadratic runtime and can take
hours.
Note: On GNU/Linux targets GDB usually does not use
inf_ptrace_xfer_partial for large memory transfers, but attempts a single
read/write from/to /proc/<pid>/mem instead. However, the kernel may
reject writes to /proc/<pid>/mem (such as kernels prior to 2.6.39), or
/proc may not be mounted. In both cases GDB falls back to the ptrace
mechanism.
This patch fixes the performance issue by attempting to fulfill the whole
transfer request in inf_ptrace_xfer_partial, using a loop around the
ptrace call.
gdb/ChangeLog:
PR gdb/21220
* inf-ptrace.c (inf_ptrace_xfer_partial): In "case
TARGET_OBJECT_MEMORY", extract the logic for ptrace peek/poke...
(inf_ptrace_peek_poke): ...here. New function. Now also loop
over ptrace peek/poke until end of buffer or error.
It isn't used anywhere else than the file it's defined in.
gdb/ChangeLog:
* parse.c (length_of_subexp): Make static.
* parser-defs.h (length_of_subexp): Remove.
So far linux_proc_xfer_partial refused to handle write requests. This is
still based on the assumption that the Linux kernel does not support
writes to /proc/<pid>/mem. That used to be true, but has changed with
Linux 2.6.39 released in May 2011.
This patch lifts this restriction and now exploits /proc/<pid>/mem for
writing to inferior memory as well, if possible.
gdb/ChangeLog:
* linux-nat.c (linux_proc_xfer_partial): Handle write operations
as well.
Commit c8b23b3f89 ("Add constructor and destructor to
demangle_parse_info") a while ago broke the "test-cp-name-parser"
build:
$ make test-cp-name-parser
[...]
src/gdb/cp-name-parser.y: In function ‘int main(int, char**)’:
src/gdb/cp-name-parser.y:2190:9: error: cannot convert ‘std::unique_ptr<demangle_parse_info>’ to ‘demangle_parse_info*’ in assignment
result = cp_demangled_name_to_comp (str2, &errmsg);
^
src/gdb/cp-name-parser.y:2199:38: error: ‘cp_demangled_name_parse_free’ was not declared in this scope
cp_demangled_name_parse_free (result);
^
src/gdb/cp-name-parser.y:2211:14: error: cannot convert ‘std::unique_ptr<demangle_parse_info>’ to ‘demangle_parse_info*’ in assignment
result = cp_demangled_name_to_comp (argv[arg], &errmsg);
^
src/gdb/cp-name-parser.y:2219:43: error: ‘cp_demangled_name_parse_free’ was not declared in this scope
cp_demangled_name_parse_free (result);
^
Makefile:2107: recipe for target 'test-cp-name-parser.o' failed
make: *** [test-cp-name-parser.o] Error 1
This commit restores it.
gdb/ChangeLog:
2017-03-14 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (cp_demangled_name_to_comp): Update comment.
(main): Use std::unique_ptr. Remove calls to
cp_demangled_name_parse_free.
gdb/ChangeLog:
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers,
amd64_linux_fetch_inferior_registers): Use regcache->ptid
instead of inferior_ptid.
We are currently assuming that regcache->ptid is equal to inferior_ptid
when we call target_fetch/store_registers. These asserts just validate
that assumption. Also, since the following patches will change target
code to use regcache->ptid instead of inferior_ptid, asserting that they
are the same should ensure that our changes don't have any unintended
consequences.
gdb/ChangeLog:
* target.c (target_fetch_registers, target_store_registers): Add
assert.
This patch introduces the regcache_get_ptid function, which can be used
to retrieve the ptid a regcache is connected to. It is used in
subsequent patches.
gdb/ChangeLog:
* regcache.h (regcache_get_ptid): New function.
* regcache.c (regcache_get_ptid): New function.
While integrating the d_printing recursion guard change into gdb I
noticed we forgot to initialize the demangle_component d_printing
field in cplus_demangle_fill_{name,extended_operator,ctor,dtor}.
As is done in cplus_demangle_fill_{component,builtin_type,operator}.
It happened to work because in gcc all demangle_components were
allocated through d_make_empty. But gdb has its own allocation
mechanism (as might other users).
libiberty/ChangeLog:
* cp-demangle.c (cplus_demangle_fill_name): Initialize
demangle_component d_printing.
(cplus_demangle_fill_extended_operator): Likewise.
(cplus_demangle_fill_ctor): Likewise.
(cplus_demangle_fill_dtor): Likewise.
gdb/ChangeLog:
* cp-name-parser.y (make_empty): Initialize d_printing to zero.
For a long time now, c++/8218 has noted that GDB is printing argument types
for destructors:
(gdb) ptype A
type = class A {
public:
~A(int);
}
This happens because cp_type_print_method_args doesn't ignore artificial
arguments. [It ignores the first `this' pointer because it simply skips
the first argument for any non-static function.]
This patch fixes this:
(gdb) ptype A
type = class A {
public:
~A();
}
I've adjusted gdb.cp/templates.exp to account for this and added a new
passing regexp.
gdb/ChangeLog
PR c++/8218
* c-typeprint.c (cp_type_print_method_args): Skip artificial arguments.
gdb/testsuite/ChangeLog
PR c++/8128
* gdb.cp/templates.exp (test_ptype_of_templates): Remove argument
type from destructor regexps.
Add a branch which actually passes the test.
Adjust "ptype t5i" test names.
If you do "interrupt -a" just while some thread is stepping over a
breakpoint, gdb trips on an internal error.
The test added by this patch manages to trigger this consistently by
spawning a few threads that are constantly tripping on a conditional
breakpoint whose condition always evaluates to false. With current
gdb, you get:
~~~
interrupt -a
.../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=on: iter=0: interrupt -a (GDB internal error)
[...]
.../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops (GDB internal error)
~~~
The assertion triggers because we're processing a stop for a thread
that had already stopped before and thus had already its inline-frame
state filled in.
Calling handle_inferior_event_1 directly within a
"thread_stop_requested" observer is something that I've wanted to get
rid of before, for being fragile. Nowadays, infrun is aware of
threads with pending events, so we can use that instead, and let the
normal fetch_inferior_event -> handle_inferior_event code path handle
the forced stop.
The change to finish_step_over is necessary because sometimes a thread
that was told to PTRACE_SINGLESTEP reports back a SIGSTOP instead of a
SIGTRAP (i.e., we tell it to single-step, and then interrupt it quick
enough that on the kernel side the thread dequeues the SIGTOP before
ever having had a chance of executing the instruction to be stepped).
SIGSTOP gets translated to a GDB_SIGNAL_0. And then finish_step_over
would miss calling clear_step_over_info, and thus miss restarting the
other threads (which in this case of threads with pending events,
means setting their "resumed" flag, so their pending events can be
consumed).
And now that we always restart threads in finish_step_over, we no
longer need to do that in handle_signal_stop.
Tested on x86_64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR gdb/18360
* infrun.c (start_step_over, do_target_resume, resume)
(restart_threads): Assert we're not resuming a thread that is
meant to be stopped.
(infrun_thread_stop_requested_callback): Delete.
(infrun_thread_stop_requested): If the thread is internally
stopped, queue a pending stop event and clear the thread's
inline-frame state.
(handle_stop_requested): New function.
(handle_syscall_event, handle_inferior_event_1): Use
handle_stop_requested.
(handle_stop_requested): New function.
(handle_signal_stop): Set the thread's stop_signal here instead of
at caller.
(finish_step_over): Clear step over info unconditionally.
(handle_signal_stop): If the user had interrupted the event
thread, consider the stop a random signal.
(handle_signal_stop) <signal arrived while stepping over
breakpoint>: Don't restart threads here.
(stop_waiting): Don't clear step-over info here.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR gdb/18360
* gdb.threads/interrupt-while-step-over.c: New file.
* gdb.threads/interrupt-while-step-over.exp: New file.
Should fix the build failure with Clang mentioned at
<https://sourceware.org/bugzilla/show_bug.cgi?id=21206#c2>:
In file included from ../../binutils-gdb/gdb/dwarf2read.c:72:
../../binutils-gdb/gdb/common/gdb_unlinker.h:35:35: error: '__nonnull__' attribute is invalid for the implicit this argument
unlinker (const char *filename) ATTRIBUTE_NONNULL (1)
^ ~
../../binutils-gdb/gdb/../include/ansidecl.h:169:48: note: expanded from macro 'ATTRIBUTE_NONNULL'
# define ATTRIBUTE_NONNULL(m) __attribute__ ((__nonnull__ (m)))
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR 21206
* common/gdb_unlinker.h (unlinker::unlinker): Attribute nonnull
goes to argument 2, not 1.
With commit 3b12939dfc ("Replace the sync_execution global with a
new enum prompt_state tristate"), GDB started aborting if you try
splitting an input line with a continuation char (backslash) while in
a multi-line command:
(gdb) commands
Type commands for breakpoint(s) 1, one per line.
End with a line saying just "end".
>print \
(gdb) 1 # note "(gdb)" incorrectly printed here.
>end
readline: readline_callback_read_char() called with no handler!
$
That abort is actually a symptom of an old problem introduced when
gdb_readline_wrapper was rewritten to use asynchronous readline, back
in 2007. Note how the "(gdb)" prompt is printed above in the "(gdb)
1" line. Clearly it shouldn't be there, but it already was before the
commit mentioned above. Fixing that also fixes the readline abort
shown above.
The problem starts when command_line_input passes a NULL prompt to
gdb_readline_wrapper when it finds previous incomplete input due to a
backslash, trying to fetch more input without printing another ">"
secondary prompt. That itself should not be a problem, because
passing NULL to gdb_readline_wrapper has the same meaning as passing a
pointer to empty string, since gdb_readline_wrapper exposes the same
interface as 'readline(char *)'. However, gdb_readline_wrapper passes
the prompt argument directly to display_gdb_prompt, and for the
latter, a NULL prompt argument has a different meaning - it requests
printing the primary prompt.
Before commit 782a7b8ef9c096 (which rewrote gdb_readline_wrapper to
use asynchronous readline), GDB behaved like this:
(gdb) commands
[....]
>print \
1
>end
(gdb)
The above is what this commit restores GDB back to.
New test included.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR cli/21218
* top.c (gdb_readline_wrapper): Avoid passing NULL to
display_gdb_prompt.
(command_line_input): Add comment.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR cli/21218
* gdb.base/commands.exp (backslash_in_multi_line_command_test):
New proc.
(top level): Call it.
Commit d7e747318f ("Eliminate make_cleanup_ui_file_delete / make
ui_file a class hierarchy") regressed the TUI's command window.
Newlines miss doing a "carriage return", resulting in output like:
~~~~~~~~~~~~~~~~~~
(gdb) helpList of classes of commands:
aliases -- Aliases of other commands
breakpoints -- Making program stop at certain points
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Before the commit mentioned above, the default ui_file->to_write
implementation had a hack that would defer into the ui_file->to_fputs
method. The TUI's ui_file did not implement the to_write method, so
all writes would end up going to the ncurses window via tui_file_fputs
-> tui_puts.
After the commit above, the hack is gone, but the TUI's ui_file still
does not implement the ui_file::write method. Since tui_file inherits
from stdio_file, writing to a tui_file ends up doing fwrite on the
FILE stream the TUI is "associated" with, via stdio_file::write,
instead of writing to the ncurses window.
The fix is to have tui_file override the "write" method.
New test included.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR tui/21216
* tui/tui-file.c (tui_file::write): New.
* tui/tui-file.h (tui_file): Override "write".
* tui/tui-io.c (do_tui_putc, update_start_line): New functions,
factored out from ...
(tui_puts): ... here.
(tui_putc): Use them.
(tui_write): New function.
* tui/tui-io.h (tui_write): Declare.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR tui/21216
* gdb.tui/tui-nl-filtered-output.exp: New file.
We will need access to the environment functions when we share
fork_inferior between GDB and gdbserver, therefore we simply make the
API on gdb/environ.[ch] available on common/. No extra adjustments
are needed to make it compile on gdbserver.
gdb/ChangeLog:
2017-03-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Replace "environ.c" with
"common/environ.c".
(HFILES_NO_SRCDIR): Likewise, for "environ.h".
* environ.c: Include "common-defs.h" instead of "defs.h. Moved
to...
* common/environ.c: ... here.
* environ.h: Moved to...
* common/environ.h: ... here.
gdb/gdbserver/ChangeLog:
2017-03-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/environ.c".
(OBJS): Add "common/environ.h".
gdb/
* gdbarch.sh (pstring_ptr): New static function.
(gdbarch_disassembler_options): Use it.
(gdbarch_verify_disassembler_options): Print valid_disassembler_options,
not valid_disassembler_option->name.
* gdbarch.c: Regenerate.
Commit d7e747318f ("Eliminate make_cleanup_ui_file_delete / make
ui_file a class hierarchy") introduced a problem when using "layout
regs", that leads gdb to crash when issuing:
./gdb ./a.out -ex 'layout regs' -ex start
From the backtrace, it's caused by this 'delete' on tui_restore_gdbout():
(gdb) bt
#0 0x00007ffff6b962b2 in free () from /lib64/libc.so.6
#1 0x000000000059fa47 in tui_restore_gdbout (ui=0x22997b0) at ../../gdb/tui/tui-regs.c:714
#2 0x0000000000619996 in do_my_cleanups (pmy_chain=pmy_chain@entry=0x1e08320 <cleanup_chain>, old_chain=old_chain@entry=0x235b4b0) at ../../gdb/common/cleanups.c:154
#3 0x0000000000619b1d in do_cleanups (old_chain=old_chain@entry=0x235b4b0) at ../../gdb/common/cleanups.c:176
#4 0x000000000059fb0d in tui_register_format (frame=frame@entry=0x22564e0, regnum=regnum@entry=0) at ../../gdb/tui/tui-regs.c:747
#5 0x000000000059ffeb in tui_get_register (data=0x2434d18, changedp=0x0, regnum=0, frame=0x22564e0) at ../../gdb/tui/tui-regs.c:768
#6 tui_show_register_group (refresh_values_only=<optimized out>, frame=0x22564e0, group=0x1e09250 <general_group>) at ../../gdb/tui/tui-regs.c:287
#7 tui_show_registers (group=0x1e09250 <general_group>) at ../../gdb/tui/tui-regs.c:156
#8 0x00000000005a07cf in tui_check_register_values (frame=frame@entry=0x22564e0) at ../../gdb/tui/tui-regs.c:496
#9 0x00000000005a3e65 in tui_check_data_values (frame=frame@entry=0x22564e0) at ../../gdb/tui/tui-windata.c:232
#10 0x000000000059cf65 in tui_refresh_frame_and_register_information (registers_too_p=1) at ../../gdb/tui/tui-hooks.c:156
#11 0x00000000006d5c05 in generic_observer_notify (args=0x7fffffffdbe0, subject=<optimized out>) at ../../gdb/observer.c:167
#12 observer_notify_normal_stop (bs=<optimized out>, print_frame=print_frame@entry=1) at ./observer.inc:61
#13 0x00000000006a6409 in normal_stop () at ../../gdb/infrun.c:8364
#14 0x00000000006af8f5 in fetch_inferior_event (client_data=<optimized out>) at ../../gdb/infrun.c:3990
#15 0x000000000066f0fd in gdb_wait_for_event (block=block@entry=0) at ../../gdb/event-loop.c:859
#16 0x000000000066f237 in gdb_do_one_event () at ../../gdb/event-loop.c:322
#17 0x000000000066f386 in gdb_do_one_event () at ../../gdb/event-loop.c:353
#18 0x00000000007411bc in wait_sync_command_done () at ../../gdb/top.c:570
#19 0x0000000000741426 in maybe_wait_sync_command_done (was_sync=0) at ../../gdb/top.c:587
#20 execute_command (p=<optimized out>, p@entry=0x7fffffffe43a "start", from_tty=from_tty@entry=1) at ../../gdb/top.c:676
#21 0x00000000006c2048 in catch_command_errors (command=0x741200 <execute_command(char*, int)>, arg=0x7fffffffe43a "start", from_tty=1) at ../../gdb/main.c:376
#22 0x00000000006c2b60 in captured_main_1 (context=0x7fffffffde70) at ../../gdb/main.c:1119
#23 captured_main (data=0x7fffffffde70) at ../../gdb/main.c:1140
#24 gdb_main (args=args@entry=0x7fffffffdf90) at ../../gdb/main.c:1158
#25 0x0000000000408cf5 in main (argc=<optimized out>, argv=<optimized out>) at ../../gdb/gdb.c:32
(gdb) f 1
#1 0x000000000059fa47 in tui_restore_gdbout (ui=0x22997b0) at ../../gdb/tui/tui-regs.c:714
714 delete gdb_stdout;
The problem is simply that the commit mentioned above made the ui_file
that gdb_stdout is temporarily set to be a stack-allocated
string_file, while before it used to be a heap-allocated ui_file. The
fix is simply to remove the now-incorrect delete.
New test included, which exercises enabling all TUI layouts, with and
without execution. (This particular crash only triggers with
execution.)
gdb/ChangeLog:
2017-03-07 Pedro Alves <palves@redhat.com>
* tui/tui-regs.c (tui_restore_gdbout): Don't delete gdb_stdout.
gdb/testsuite/ChangeLog:
2017-03-07 Pedro Alves <palves@redhat.com>
* gdb.base/tui-layout.c: New file.
* gdb.base/tui-layout.exp: New file.
This patch initializes the BND registers before executing the inferior
call. BND registers can be in arbitrary values at the moment of the
inferior call. In case the function being called uses as part of the
parameters BND register, e.g. when passing a pointer as parameter, the
current value of the register will be used. This can cause boundary
violations that are not due to a real bug or even desired by the user.
In this sense the best to be done is set the BND registers to allow
access to the whole memory, i.e. initialized state, before pushing the
inferior call.
2017-03-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* i387-tdep.h (i387_reset_bnd_regs): Add function definition.
* i387-tdep.c (i387_reset_bnd_regs): Add function implementation.
* i386-tdep.c (i386_push_dummy_call): Call i387_reset_bnd_regs.
* amd64-tdep (amd64_push_dummy_call): Call i387_reset_bnd_regs.
gdb/testsuite/ChangeLog:
* i386-mpx-call.c: New file.
* i386-mpx-call.exp: New file.
gdb/doc/ChangeLog:
* Memory Protection Extensions: Add information about inferior
calls.
As reported in PR 21165,
(gdb) info locals^M
gv = /home/yao/SourceCode/gnu/gdb/git/gdb/value.c:372: internal-error: int value_bits_any_optimized_out(const value*, int, int): Assertion `!value->lazy' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.ada/info_locals_renaming.exp: info locals (GDB internal error)
Resyncing due to internal error.
This internal error is caused by e8b24d9 (Remove parameter valaddr from
la_val_print). Commit e8b24d9 removes some calls to
value_contents_for_printing, but value_fetch_lazy is not called, so the
internal error above is triggered. This patch adds value_fetch_lazy
call before val_print.
gdb:
2017-03-03 Yao Qi <yao.qi@linaro.org>
PR gdb/21165
* ada-valprint.c (ada_val_print_ref): Call value_fetch_lazy if
value is lazy.
* valprint.c (common_val_print): Likewise.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
The previous patch introduced this error with recent-ish GCCs:
../../binutils-gdb/gdb/remote.c: In function ‘int remote_add_target_side_condition(gdbarch*, bp_target_info*, char*, char*)’:
../../binutils-gdb/gdb/remote.c:9668:8: error: types may not be defined in a for-range-declaration [-Werror]
for (struct agent_expr *aexpr : bp_tgt->conditions)
^~~~~~
Removing the struct keyword fixes the error.
gdb/ChangeLog:
* remote.c (remote_add_target_side_condition): Remove "struct"
keyword from range-based for loop.
Using a range based for loop makes this code a bit more clean and
readable.
The comment above is clearly erroneous, so I've updated it.
gdb/ChangeLog:
* remote.c (remote_add_target_side_condition): Use range-based
for loop. Update comment.
ASAN reports the following error,
(gdb) PASS: gdb.fortran/vla-ptr-info.exp: continue to breakpoint: pvla-associated
print &pvla^M
=================================================================^M
^[[1m^[[31m==14331==ERROR: AddressSanitizer: global-buffer-overflow on address 0x000000ea569f at pc 0x0000008eb546 bp 0x7ffde0c1dc70 sp 0x7ffde0c1dc60^M
^[[1m^[[0m^[[1m^[[34mREAD of size 1 at 0x000000ea569f thread T0^[[1m^[[0m^M
#0 0x8eb545 in f_print_type(type*, char const*, ui_file*, int, int, type_print_options const*) ../../binutils-gdb/gdb/f-typeprint.c:89^M
#1 0xb611e2 in type_print(type*, char const*, ui_file*, int) ../../binutils-gdb/gdb/typeprint.c:365^M
#2 0x7b3471 in c_value_print(value*, ui_file*, value_print_options const*) ../../binutils-gdb/gdb/c-valprint.c:650^M
#3 0xb99517 in value_print(value*, ui_file*, value_print_options const*) ../../binutils-gdb/gdb/valprint.c:1233^M
#4 0xa42be8 in print_formatted ../../binutils-gdb/gdb/printcmd.c:321^M
#5 0xa46ac9 in print_value(value*, format_data const*) ../../binutils-gdb/gdb/printcmd.c:1233^M
#6 0xa46d82 in print_command_1 ../../binutils-gdb/gdb/printcmd.c:1261^M
#7 0xa46e3e in print_command ../../binutils-gdb/gdb/printcmd.c:1267
on this line of code
demangled_args = varstring[strlen (varstring) - 1] == ')';
because varstring is an empty string and strlen () is 0, so "strlen () - 1"
is definitely out of the bound of "varstring",
(gdb) bt 10
at /home/yao/SourceCode/gnu/gdb/git/gdb/f-typeprint.c:56
at /home/yao/SourceCode/gnu/gdb/git/gdb/typeprint.c:365
at /home/yao/SourceCode/gnu/gdb/git/gdb/c-valprint.c:650
at /home/yao/SourceCode/gnu/gdb/git/gdb/valprint.c:1236
This patch adds a pre-check that varstring is empty or not.
gdb:
2017-02-27 Yao Qi <yao.qi@linaro.org>
* f-typeprint.c (f_print_type): Check "varstring" is empty first.
gcc-6.3.1-1.fc25.x86_64
dwarf2read.c: In function ‘void create_debug_type_hash_table(dwo_file*, dwarf2_section_info*, htab*&, rcuh_kind)’:
dwarf2read.c:4776:32: error: ‘header.comp_unit_head::type_offset_in_tu.cu_offset::cu_off’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
dwarf2read.c:4816:21: error: ‘header.comp_unit_head::signature’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cc1plus: all warnings being treated as errors
gdb/ChangeLog
2017-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (create_debug_type_hash_table): Initialize
header.signature and header.type_offset_in_tu.
add_symtab_completions does the exact same as the code that it is
replacing.
gdb/ChangeLog:
2017-02-24 Pedro Alves <palves@redhat.com>
* symtab.c (make_file_symbol_completion_list_1): Use
add_symtab_completions.
I wanted to pass a lambda to iterate_over_symtabs (see following
patch), so I converted it to function_view, and then the rest is
cascaded from that.
This gets rid of a bunch of single-use callback functions and
corresponding manually managed callback capture types
(add_partial_datum, search_symbols_data, etc.) in favor of letting the
compiler generate them for us by using lambdas with a capture. In a
couple cases, it was more natural to convert the existing function
callbacks to function objects (i.e., operator(), e.g.,
decode_compound_collector).
gdb/ChangeLog:
2017-02-23 Pedro Alves <palves@redhat.com>
* ada-lang.c: Include "common/function-view.h".
(ada_iterate_over_symbols): Adjust to use function_view as
callback type.
(struct add_partial_datum, ada_complete_symbol_matcher): Delete.
(ada_make_symbol_completion_list): Use a lambda.
(ada_exc_search_name_matches): Delete.
(name_matches_regex): New.
(ada_add_global_exceptions): Use a lambda and name_matches_regex.
* compile/compile-c-support.c: Include "common/function-view.h".
(print_one_macro): Change prototype to accept a ui_file pointer.
(write_macro_definitions): Use a lambda.
* dwarf2read.c: Include "common/function-view.h".
(dw2_map_expand_apply, dw2_map_symtabs_matching_filename)
(dw2_expand_symtabs_matching): Adjust to use function_view as
callback type.
* language.h: Include "common/function-view.h".
(struct language_defn) <la_iterate_over_symbols>: Adjust to use
function_view as callback type.
(LA_ITERATE_OVER_SYMBOLS): Remove DATA parameter.
* linespec.c: Include "common/function-view.h".
(collect_info::add_symbol): New method.
(struct symbol_and_data_callback, iterate_inline_only, struct
symbol_matcher_data, iterate_name_matcher): Delete.
(iterate_over_all_matching_symtabs): Adjust to use function_view
as callback type and lambdas.
(iterate_over_file_blocks): Adjust to use function_view as
callback type.
(decode_compound_collector): Now a class with private fields.
(decode_compound_collector::release_symbols): New method.
(collect_one_symbol): Rename to...
(decode_compound_collector::operator()): ... this and adjust.
(lookup_prefix_sym): decode_compound_collector construction bits
move to decode_compound_collector ctor. Pass the
decode_compound_collector object directly as callback. Remove
cleanups and use decode_compound_collector::release_symbols
instead.
(symtab_collector): Now a class with private fields.
(symtab_collector::release_symtabs): New method.
(add_symtabs_to_list): Rename to...
(symtab_collector::operator()): ... this and adjust.
(collect_symtabs_from_filename): symtab_collector construction
bits move to symtab_collector ctor. Pass the symtab_collector
object directly as callback. Remove cleanups and use
symtab_collector::release_symtabs instead.
(collect_symbols): Delete.
(add_matching_symbols_to_info): Use lambdas.
* macrocmd.c (print_macro_callback): Delete.
(info_macro_command): Use a lambda.
(info_macros_command): Pass print_macro_definition as callable
directly.
(print_one_macro): Remove 'ignore' parameter.
(macro_list_command): Adjust.
* macrotab.c (macro_for_each_data::fn): Now a function_view.
(macro_for_each_data::user_data): Delete field.
(foreach_macro): Adjust to call the function_view.
(macro_for_each): Adjust to use function_view as callback type.
(foreach_macro_in_scope): Adjust to call the function_view.
(macro_for_each_in_scope): Adjust to use function_view as callback
type.
* macrotab.h: Include "common/function-view.h".
(macro_callback_fn): Declare a prototype instead of a pointer.
Remove "user_data" parameter.
(macro_for_each, macro_for_each_in_scope): Adjust to use
function_view as callback type.
* psymtab.c (partial_map_expand_apply)
(psym_map_symtabs_matching_filename, recursively_search_psymtabs):
Adjust to use function_view as callback type and to return bool.
(psym_expand_symtabs_matching): Adjust to use function_view as
callback types.
* symfile-debug.c (debug_qf_map_symtabs_matching_filename): Adjust
to use function_view as callback type and to return bool.
(debug_qf_expand_symtabs_matching): Adjust to use function_view as
callback types.
* symfile.c (expand_symtabs_matching): Adjust to use function_view
as callback types.
* symfile.h: Include "common/function-view.h".
(expand_symtabs_file_matcher_ftype)
(expand_symtabs_symbol_matcher_ftype)
(expand_symtabs_exp_notify_ftype): Remove "data" parameter and
return bool.
(quick_symbol_functions::map_symtabs_matching_filename)
(quick_symbol_functions::expand_symtabs_matching): Adjust to use
function_view as callback type and return bool.
(expand_symtabs_matching): Adjust to use function_view as callback
type.
(maintenance_expand_name_matcher)
(maintenance_expand_file_matcher): Delete.
(maintenance_expand_symtabs): Use lambdas.
* symtab.c (iterate_over_some_symtabs): Adjust to use
function_view as callback types and return bool.
(iterate_over_symtabs): Likewise. Use unique_xmalloc_ptr instead
of a cleanup.
(lookup_symtab_callback): Delete.
(lookup_symtab): Use a lambda.
(iterate_over_symbols): Adjust to use function_view as callback
type.
(struct search_symbols_data, search_symbols_file_matches)
(search_symbols_name_matches): Delete.
(search_symbols): Use a pair of lambdas.
(struct add_name_data, add_macro_name, symbol_completion_matcher)
(symtab_expansion_callback): Delete.
(default_make_symbol_completion_list_break_on_1): Use lambdas.
* symtab.h: Include "common/function-view.h".
(iterate_over_some_symtabs): Adjust to use function_view as
callback type and return bool.
(iterate_over_symtabs): Adjust to use function_view as callback
type.
(symbol_found_callback_ftype): Remove 'data' parameter and return
bool.
(iterate_over_symbols): Adjust to use function_view as callback
type.
This commit adds a new function_view type. This type holds a
non-owning reference to a callable. It is meant to be used as
callback type of functions, instead of using the C-style pair of
function pointer and 'void *data' arguments. function_view allows
passing references to stateful function objects / lambdas with
captures as callbacks efficiently, while function pointer + 'void *'
does not.
See the intro in the new function-view.h header for more.
Unit tests included, put into a new gdb/unittests/ subdir.
gdb/ChangeLog:
2017-02-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS): New.
(%.o) <unittests/%.c>: New pattern.
* configure.ac ($development): Add $(SUBDIR_UNITTESTS_OBS) to
CONFIG_OBS, and $(SUBDIR_UNITTESTS_SRCS) to CONFIG_SRCS.
* common/function-view.h: New file.
* unittests/function-view-selftests.c: New file.
* configure: Regenerate.
While inspecting some target code, I noticed that in these two
implementations of thread_alive, inferior_ptid is referenced directly
instead of using the ptid passed as parameters. I guess that it is
wrong, although I can't really test it in both cases.
gdb/ChangeLog:
* bsd-uthread.c (bsd_uthread_thread_alive): Use ptid instead of
inferior_ptid.
* go32-nat.c (go32_thread_alive): Likewise.
ASAN reports an error,
-var-create container @ c^M
=================================================================^M
^[[1m^[[31m==21639==ERROR: AddressSanitizer: alloc-dealloc-mismatch (malloc vs operator delete) on 0x6030000805c0^M
^[[1m^[[0m #0 0x7f2449b01b2a in operator delete(void*) (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x99b2a)^M
#1 0xbb601d in update_dynamic_varobj_children ../../binutils-gdb/gdb/varobj.c:794^M
#2 0xbb6556 in varobj_get_num_children(varobj*) ../../binutils-gdb/gdb/varobj.c:854^M
#3 0x580cb4 in print_varobj ../../binutils-gdb/gdb/mi/mi-cmd-var.c:61^M
#4 0x58138b in mi_cmd_var_create(char*, char**, int) ../../binutils-gdb/gdb/mi/mi-cmd-var.c:145^M
#5 0x5967ce in mi_cmd_execute ../../binutils-gdb/gdb/mi/mi-main.c:2301^M
#6 0x594b05 in captured_mi_execute_command ../../binutils-gdb/gdb/mi/mi-main.c:2001
....
^M
^[[1m^[[32m0x6030000805c0 is located 0 bytes inside of 32-byte region [0x6030000805c0,0x6030000805e0)^M
^[[1m^[[0m^[[1m^[[35mallocated by thread T0 here:^[[1m^[[0m^M
#0 0x7f2449b00602 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x98602)^M
#1 0x7d1596 in xmalloc ../../binutils-gdb/gdb/common/common-utils.c:43^M
#2 0x604176 in py_varobj_iter_new ../../binutils-gdb/gdb/python/py-varobj.c:159^M
#3 0x6042da in py_varobj_get_iterator(varobj*, _object*) ../../binutils-gdb/gdb/python/py-varobj.c:198^M
#4 0xbb5806 in varobj_get_iterator ../../binutils-gdb/gdb/varobj.c:720^M
#5 0xbb5b9b in update_dynamic_varobj_children ../../binutils-gdb/gdb/varobj.c:758^M
gdb:
2017-02-23 Yao Qi <yao.qi@linaro.org>
* varobj-iter.h (varobj_iter_delete): Call xfree instead of
delete.
In commit 2f408ec (Use ui_file_as_string throughout more), we start to
new varobj_item,
> - vitem = XNEW (struct varobj_item);
> + vitem = new varobj_item ();
but we still use xfree. This causes some ASAN errors,
-var-update container^M
=================================================================^M
^[[1m^[[31m==20660==ERROR: AddressSanitizer: alloc-dealloc-mismatch (operator new vs free) on 0x602000090c10^M
^[[1m^[[0m #0 0x2baa77d03631 in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x54631)^M
#1 0x80e0c8 in xfree(void*) /home/yao/SourceCode/gnu/gdb/git/gdb/common/common-utils.c:100^M
#2 0xc13670 in varobj_clear_saved_item /home/yao/SourceCode/gnu/gdb/git/gdb/varobj.c:727^M
#3 0xc13957 in update_dynamic_varobj_children /home/yao/SourceCode/gnu/gdb/git/gdb/varobj.c:752^M
#4 0xc1841c in varobj_update(varobj**, int) /home/yao/SourceCode/gnu/gdb/git/gdb/varobj.c:1699^M
#5 0x5a2bf7 in varobj_update_one /home/yao/SourceCode/gnu/gdb/git/gdb/mi/mi-cmd-var.c:712^M
#6 0x5a2a41 in mi_cmd_var_update(char*, char**, int) /home/yao/SourceCode/gnu/gdb/git/gdb/mi/mi-cmd-var.c:695^
........
^M
^[[1m^[[32m0x602000090c10 is located 0 bytes inside of 16-byte region [0x602000090c10,0x602000090c20)^M
^[[1m^[[0m^[[1m^[[35mallocated by thread T0 here:^[[1m^[[0m^M
#0 0x2baa77d0415f in operator new(unsigned long) (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x5515f)^M
#1 0x63613e in py_varobj_iter_next /home/yao/SourceCode/gnu/gdb/git/gdb/python/py-varobj.c:112^M
#2 0xc13b89 in update_dynamic_varobj_children /home/yao/SourceCode/gnu/gdb/git/gdb/varobj.c:776^M
#3 0xc1841c in varobj_update(varobj**, int) /home/yao/SourceCode/gnu/gdb/git/gdb/varobj.c:1699^M
#4 0x5a2bf7 in varobj_update_one /home/yao/SourceCode/gnu/gdb/git/gdb/mi/mi-cmd-var.c:712^M
#5 0x5a2a41 in mi_cmd_var_update(char*, char**, int) /home/yao/SourceCode/gnu/gdb/git/gdb/mi/mi-cmd-var.c:695^M
gdb:
2017-02-23 Yao Qi <yao.qi@linaro.org>
* varobj.c (varobj_clear_saved_item): Use delete instead of
xfree.
(update_dynamic_varobj_children): Likewise.
On some Fedora 23 systems an internal error has been printed.
gdb/ChangeLog
2017-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dwarf2_record_block_ranges): Add forgotten BASEADDR.
... so that we don't need to do it manually, and potentially forget.
For example, this allows to do:
my_flags flags;
...
flags |= some_flag;
gdb/ChangeLog:
* common/enum-flags.h (enum_flags::enum_flags): Initialize
m_enum_value to 0 in default constructor.
gdb/
2017-02-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (LOAD_AND_RESERVE_MASK): Rename from LWARX_MASK.
(STORE_CONDITIONAL_MASK): Rename from STWCX_MASK.
(LBARX_INSTRUCTION, LHARX_INSTRUCTION, LQARX_INSTRUCTION,
STBCX_INSTRUCTION, STHCX_INSTRUCTION, STQCX_INSTRUCTION): New defines.
(IS_LOAD_AND_RESERVE_INSN, IS_STORE_CONDITIONAL_INSN): New macros.
(ppc_displaced_step_copy_insn): Use IS_LOAD_AND_RESERVE_INSN.
(ppc_deal_with_atomic_sequence): Use IS_LOAD_AND_RESERVE_INSN and
IS_STORE_CONDITIONAL_INSN.
gdb/testsuite/
2017-02-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* gdb.arch/ppc64-isa207-atomic-inst.exp: New testcase based on
gdb.arch/ppc64-atomic-inst.exp. Add tests for lbarx/stbcx, lharx/sthcx
and lqarx/stqcx.
* gdb.arch/ppc64-isa207-atomic-inst.S: New file.
* gdb.arch/ppc64-isa207-atomic-inst.c: Likewise.
gcc-4.8.5-11.el7.x86_64
dwarf2read.c: In function ‘pc_bounds_kind dwarf2_get_pc_bounds(die_info*, CORE_ADDR*, CORE_ADDR*, dwarf2_cu*, partial_symtab*)’:
dwarf2read.c:12134:7: error: ‘range_end’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
dwarf2read.c:12133:7: error: ‘range_beginning’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
gdb/ChangeLog
2017-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2_rnglists_process: Initialize range_beginning and range_end.
DWARF-5 has new form DW_FORM_data16. The problem is that GDB cannot pass
16-byte constant as a constant value as that would require GDB to use GCC
extension __int128.
Formerly such data was coded as DW_FORM_block* so GDB still decodes
DW_FORM_data16 like DW_FORM_block*.
gdb/ChangeLog
2017-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (skip_one_die, read_attribute_value)
(dwarf2_const_value_attr, dump_die_shallow)
(dwarf2_get_attr_constant_value, dwarf2_fetch_constant_bytes)
(skip_form_bytes, attr_form_is_constant): Handle DW_FORM_data16.
gdb/testsuite/ChangeLog
2017-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.dwarf2/formdata16.c: New file.
* gdb.dwarf2/formdata16.exp: New file.
* lib/dwarf.exp (Dwarf): Add DW_FORM_data16.
I find it as an improvement on its own, it prevents more code duplication in
a future patch.
gdb/ChangeLog
2017-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (abbrev_table_read_table): Read the data only once.
DWARF-5 has .debug_rnglists which is somehow similar to .debug_ranges.
This patch converts dwarf2_ranges_read to dwarf2_ranges_process which can work
with both DWARF kinds of range lists through a callback.
It also simplifies dwarf2_record_block_ranges which can benefit from it.
gdb/ChangeLog
2017-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dwarf2_ranges_process): New function from
dwarf2_ranges_read.
(dwarf2_ranges_read, dwarf2_record_block_ranges): Use
dwarf2_ranges_process.
DWARF-5 moved .debug_types into .debug_info and so the types reading code needs
to be reused more (in a future patch).
gdb/ChangeLog
2017-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (create_debug_type_hash_table): New function from
create_debug_types_hash_table.
(create_debug_types_hash_table): Call create_debug_type_hash_table.
(create_all_type_units, open_and_init_dwo_file): Update
create_debug_types_hash_table callers.
On fork-child.c:trace_start_error, va_end should refer to 'ap', not
'args. This fixes it.
Sorry about the breakage.
gdb/ChangeLog:
2017-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/16188
* fork-child.c (trace_start_error): Fix thinko. va_end should
refer to 'ap', not 'args'.
This patch fixes PR gdb/16188, which is about the fact that
fork_inferior doesn't verify the return value of the "traceme_fun"
callback. On most targets, this callback is actually a wrapper to a
ptrace call that does a PTRACE_TRACEME on the forked GDB process that
will eventually become the inferior.
Thanks to Pedro, this second version of the patch is simpler and more
more logical. Basically, two helper functions are added:
trace_start_error and trace_start_error_with_name. The former can be
used when there is a customized error message to be printed to the
user. The latter works like perror_with_name, so you just need to
pass the function that error'd.
Both helper functions mentioned above do basically the same thing:
print the error message to stderr and call _exit, properly terminating
the forked inferior.
Most of the patch takes care of guarding the necessary system calls
against errors on the "traceme_fun" callbacks. It is not right to
call error on these situations, so I've replaced these calls with the
proper helper function call.
Regression-tested on BuildBot.
Thanks,
gdb/ChangeLog:
2017-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
PR gdb/16188
* darwin-nat.c (darwin_ptrace_me): Check if calls to system
calls succeeded.
* fork-child.c (trace_start_error): New function.
(trace_start_error_with_name): Likewise.
* gnu-nat.c (gnu_ptrace_me): Check if call to PTRACE succeeded.
* inf-ptrace.c (inf_ptrace_me): Likewise.
* inferior.h (trace_start_error): New prototype.
(trace_start_error_with_name): Likewise.
This is a fix for PR gdb/21164. The problem started to happen after:
commit 34c41c681f
Author: Doug Evans <xdje42@gmail.com>
AuthorDate: Mon Dec 19 08:33:46 2016 -0800
New syntax for mt print symbols,msymbols,psymbols.
This change introduced new syntax for the mentioned commands, and
improved the parsing of arguments by using 'gdb_buildargv'. However,
it is necessary to check if the argv being built is not NULL, which
can happen if the user doesn't provide any arguments to these
commands.
gdb/ChangeLog:
2017-02-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21164
* psymtab.c (maintenance_print_psymbols): Verify if 'argv' is not
NULL before using it.
* symmisc.c (maintenance_print_symbols): Likewise.
(maintenance_print_msymbols): Likewise.
gdb/testsuite/ChangeLog:
gdb/ChangeLog:
2017-02-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21164
* gdb.base/maint.exp: Add testcases for when the commands do
not have arguments.
This adds an event that is emitted just before GDB presents a prompt
to the user. This provides Python code a way to react to whatever
changes might have been made by the previous command. For example, in
my GUI I use this to track changes to the selected frame and reflect
them in the UI.
Built and regtested on x86-64 Fedora 23.
gdb/ChangeLog
2017-02-14 Tom Tromey <tom@tromey.com>
PR python/13598:
* python/python.c (gdbpy_before_prompt_hook): Emit before_prompt
event.
* python/py-evts.c (gdbpy_initialize_py_events): Add
before_prompt registry.
* python/py-events.h (events_object) <before_prompt>: New field.
gdb/doc/ChangeLog
2017-02-14 Tom Tromey <tom@tromey.com>
PR python/13598:
* python.texi (Events In Python): Document events.before_prompt.
gdb/testsuite/ChangeLog
2017-02-14 Tom Tromey <tom@tromey.com>
PR python/13598:
* gdb.python/py-events.exp: Add before_prompt event tests.
On 64-bit FC25, the _dl_runtime_resolve function uses a conditional branch to
'call' a particular variant optimized for that system:
(gdb) disas _dl_runtime_resolve_avx_opt
Dump of assembler code for function _dl_runtime_resolve_avx_opt:
0x00007ffff7deeb60 <+0>: push %rax
0x00007ffff7deeb61 <+1>: push %rcx
0x00007ffff7deeb62 <+2>: push %rdx
0x00007ffff7deeb63 <+3>: mov $0x1,%ecx
0x00007ffff7deeb68 <+8>: xgetbv
0x00007ffff7deeb6b <+11>: mov %eax,%r11d
0x00007ffff7deeb6e <+14>: pop %rdx
0x00007ffff7deeb6f <+15>: pop %rcx
0x00007ffff7deeb70 <+16>: pop %rax
0x00007ffff7deeb71 <+17>: and $0x4,%r11d
0x00007ffff7deeb75 <+21>: bnd je 0x7ffff7def4a0 <_dl_runtime_resolve_sse_vex>
End of assembler dump.
When computing the function-level trace, btrace treats this as a switch from
_dl_runtime_resolve_avx_opt to _dl_runtime_resolve_sse_vex. We know that we
switched functions but we can't really say in which caller/callee relationship
those two functions are.
In addition to preserving the indentaion level, also preserve the caller
information. This is a heuristic since we don't really know. But at least in
this case, this seems to be the right thing to do.
This fixes a fail in gdb.btrace/rn-dl-bind.exp on 64-bit FC25.
gdb/
* btrace.c (ftrace_new_switch): Preserve up link and flags.
This fairly obvious patch adds usage text to the load command's help text.
Originally it did not have usage and mentioned things like FILE and OFFSET
without explaining how those should be passed in the command.
gdb/ChangeLog:
2017-02-13 Luis Machado <lgustavo@codesourcery.com>
* symfile (_initialize_symfile): Add usage text to the load command's
help text.
gdb/doc/ChangeLog:
2017-02-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (Target Commands): Document the optional offset
argument for the load command.
This is a follow-up to
https://sourceware.org/ml/gdb-patches/2017-02/msg00261.html
This patch restricts queries to the main UI, which allows to avoid two
different problems.
The first one is that GDB is issuing queries on secondary MI channels
for which a TTY is allocated. The second one is that GDB is not able to
handle queries on two (CLI) UIs simultaneously. Restricting queries to
the main UI allows to bypass these two problems.
More details on how/why these two problems happen:
1. Queries on secondary MI UI
The current criterion to decide if we should query the user is whether
the input stream is a TTY. The original way to start GDB in MI mode
from a front-end was to create a subprocess with pipes to its
stdin/stdout. In this case, the input was considered non-interactive
and queries were auto-answered. Now that front-ends can create the MI
channel as a separate UI connected to a dedicated TTY, GDB now
considers this input stream as interactive and sends queries to it.
By restricting queries to the main UI, we make sure we never query on
the secondary MI UI.
2. Simultaneous queries
As Pedro stated it, when you have two queries on two different CLI UIs
at the same time, you end up with the following pseudo stack:
#0 gdb_readline_wrapper
#1 defaulted_query // for UI #2#2 handle_command
#3 execute_command ("handle SIGTRAP" ....
#4 stdin_event_handler // input on UI #2#5 gdb_do_one_event
#7 gdb_readline_wrapper
#8 defaulted_query // for UI #1#9 handle_command
#10 execute_command ("handle SIGINT" ....
#11 stdin_event_handler // input on UI #1#12 gdb_do_one_event
#13 gdb_readline_wrapper
trying to answer the query on UI #1 will therefore answer for UI #2.
By restricting the queries to the main UI, we ensure that there will
never be more than one pending query, since you can't have two queries
on a UI at the same time.
I added a snippet to gdb.base/new-ui.exp to verify that we get a query
on the main UI, but that we don't on the secondary one (or, more
precisely, that it gets auto-answered).
gdb/ChangeLog:
* utils.c (defaulted_query): Don't query on secondary UIs.
gdb/testsuite/ChangeLog:
* gdb.base/new-ui.exp (do_test): Test queries behavior on main
and extra UIs.
I found another unused "cleanup" local variable, this time in
rust-lang.c. This patch removes it. Committing as obvious.
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_get_disr_info): Remove unused variable.
I found an unused local variables in a couple of places in the Python
code; this removes them.
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* python/py-value.c (valpy_richcompare_throw): Remove unnecessary
"cleanup" local.
* python/py-type.c (typy_legacy_template_argument): Remove
unnecessary "cleanup" local.
This patch slightly refactors a couple of spots in the Python code to
avoid some gotos.
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* python/python.c (do_start_initialization): New function, from
_initialize_python.
(_initialize_python): Call do_start_initialization.
* python/py-linetable.c (ltpy_iternext): Use explicit returns, not
goto.
This patch changes one more spot in the Python layer to use gdbpy_ref.
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (pretty_print_one_value): Use
gdbpy_ref.
This uses the new gdbpy_ref template to simplify logic in various
parts of the Python layer; for example removing repeated error code or
removing gotos.
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_destroyer): Use gdbpy_ref.
* python/py-breakpoint.c (gdbpy_breakpoint_deleted): Use
gdbpy_ref.
* python/py-type.c (field_new): Use gdbpy_ref.
* python/py-symtab.c (symtab_and_line_to_sal_object): Use
gdbpy_ref.
* python/py-progspace.c (pspy_new): Use gdbpy_ref.
(py_free_pspace): Likewise.
(pspace_to_pspace_object): Likewise.
* python/py-objfile.c (objfpy_new): Use gdbpy_ref.
(py_free_objfile): Likewise.
(objfile_to_objfile_object): Likewise.
* python/py-inferior.c (delete_thread_object): Use
gdbpy_ref.
(infpy_read_memory): Likewise.
(py_free_inferior): Likewise.
* python/py-evtregistry.c (create_eventregistry_object): Use
gdbpy_ref.
* python/py-event.c (create_event_object): Use gdbpy_ref.
This turns gdbpy_ref into a template class, so that it can be used to
wrap subclasses of PyObject. The default argument remains PyObject;
and this necessitated renaming uses of "gdbpy_ref" to "gdbpy_ref<>".
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* python/py-ref.h (gdbpy_ref_policy): Now a template.
(gdbpy_ref): Now a template; allow subclasses of PyObject to be
used.
* python/py-arch.c, python/py-bpevent.c, python/py-breakpoint.c,
python/py-cmd.c, python/py-continueevent.c, python/py-event.c,
python/py-exitedevent.c, python/py-finishbreakpoint.c,
python/py-framefilter.c, python/py-function.c,
python/py-inferior.c, python/py-infevents.c,
python/py-linetable.c, python/py-newobjfileevent.c,
python/py-param.c, python/py-prettyprint.c, python/py-ref.h,
python/py-signalevent.c, python/py-stopevent.c,
python/py-symbol.c, python/py-threadevent.c, python/py-type.c,
python/py-unwind.c, python/py-utils.c, python/py-value.c,
python/py-varobj.c, python/py-xmethods.c, python/python.c,
varobj.c: Change gdbpy_ref to gdbpy_ref<>.
This patch introduces a bit of infrastructure -- namely, a minimal
std::optional analogue called gdb::optional, and an RAII template
class that works like make_cleanup_ui_out_tuple_begin_end or
make_cleanup_ui_out_list_begin_end -- and then uses these in the
Python code. This removes a number of cleanups and generally
simplifies this code.
std::optional is only available in C++17. Normally I would have had
this code check __cplusplus, but my gcc apparently isn't new enough to
find <optional>, even with -std=c++1z; so, because I could not test
it, the patch does not do this.
gdb/ChangeLog
2017-02-10 Tom Tromey <tom@tromey.com>
* ui-out.h (ui_out_emit_type): New class.
(ui_out_emit_tuple, ui_out_emit_list): New typedefs.
* python/py-framefilter.c (py_print_single_arg): Use gdb::optional
and ui_out_emit_tuple.
(enumerate_locals): Likewise.
(py_mi_print_variables, py_print_locals, py_print_args): Use
ui_out_emit_list.
(py_print_frame): Use gdb::optional, ui_out_emit_tuple,
ui_out_emit_list.
* common/gdb_optional.h: New file.
Currently, the breakpoint documentation refers to some commands taking breakpoint
"ranges" as arguments. We discussed this with Pedro and concluded that it would
be more accurate to speak in terms of breakpoint "lists", whose elements can optionally
be ranges. I also fixed a couple of minor mistakes in the docs.
gdb/ChangeLog:
* breakpoint.c (_initialize_breakpoint): Update the help description
of the 'commands' command to indicate that it takes a list argument.
gdb/doc/ChangeLog:
* gdb.texinfo (Breakpoints): Reword documentation to speak in terms of
space-separated breakpoint lists. Also add a missing @table command
and @cindex for breakpoint lists.
gdb/testsuite/ChangeLog:
* gdb.base/help.exp: Update match pattern for testing 'help commands'.
This commit fixes a segmentation fault on tab completion when
certain debuginfo is installed:
https://bugzilla.redhat.com/show_bug.cgi?id=1398387
gdb/ChangeLog:
* symtab.c (add_symtab_completions): Prevent NULL pointer
dereference.
This commit removes interp::quiet_p / interp_quiet_p /
interp_set_quiet, because AFAICS, it doesn't really do anything.
interp_quiet is only ever checked inside interp_set nowadays:
if (!first_time && !interp_quiet_p (interp))
{
xsnprintf (buffer, sizeof (buffer),
"Switching to interpreter \"%.24s\".\n", interp->name);
current_uiout->text (buffer);
}
I did a bit of archaelogy, and found that back in 4a8f6654 (2003), it
was also called in another place, to decide whether to print the CLI
prompt.
AFAICS, that condition is always false today, making that if/then
block always dead code. If we remove that code, then there are no
interp_quiet_p uses left in the tree, so we can remove it all.
There are two paths that lead to interp_set calls:
#1 - When installing the top level interpreter. In this case,
FIRST_TIME is true.
#2 - In interpreter_exec_cmd. In this case, the interpreter is always
set quiet before interp_set is called.
Grepping a gdb.log of an x86_64 GNU/Linux run for "Switching to
interpreter" (before this patch) doesn't find any hits.
I suspect the intention of this message was to support something like
a "set interpreter ..." command that would change the interpreter
permanently. But there's no such command.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2017-02-08 Pedro Alves <palves@redhat.com>
* interps.c (interp::interp): Remove reference to quiet_p.
(interp_set): Make static. Remove dead "Switching to" output
code.
(interp_quiet_p, interp_set_quiet): Delete.
(interpreter_exec_cmd): Don't set the interpreter quiet.
* interps.h (interp_quiet_p): Make static.
(class interp) <quiet_p>: Remove field
When defining a new macro, "command" is not recognized as an alias for
"commands":
(gdb) define breakmain
Type commands for definition of "breakmain".
End with a line saying just "end".
>break main
>command
>echo "IN MAIN\n"
>end
(gdb)
There is a special case for while-stepping, where 'ws' and 'stepping' are
recognized explicitely. Instead of adding more special cases, this change
uses cli-decode.
gdb/ChangeLog:
* cli/cli-decode.c (find_command_name_length): Make it extern.
* cli/cli-decode.h (find_command_name_length): Declare.
* cli/cli-script.c (command_name_equals, line_first_arg):
New functions.
(process_next_line): Use cli-decode to parse command names.
(build_command_line): Make args a constant pointer.
gdb/testsuite/ChangeLog:
* gdb.base/define.exp: Add test for command abbreviations
in define.
Case-insensitive search for command names is an obscure undocumented
feature, which seems to be unused, is not tested and not quite
consistent. Remove it.
gdb/ChangeLog:
* cli-decode.c (lookup_cmd_1, lookup_cmd_composition):
Remove case-insensitive search.
gdb/ChangeLog:
2017-02-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-tdep.c (sparc32_gdbarch_init): Do not place a + operator
at the end of the line.
This patch addresses BZ 21005, which is gdb failing to recognize an rdrand
instruction.
It enables support for both rdrand and rdseed and handles extended register
addressing (R8~R15) for 16-bit, 32-bit and 64-bit.
gdb/ChangeLog
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* NEWS: Mention support for record/replay of Intel 64 rdrand and
rdseed instructions.
i386-tdep.c (i386_process_record): Handle Intel 64 rdrand and rseed.
gdb/testsuite/ChangeLog:
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/insn-reverse.c: Include insn-reverse-x86.c.
* gdb.reverse/insn-reverse-x86.c: New file.
gdb/ChangeLog:
2017-02-06 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20936
Provide and use sparc32 and sparc64 target description XML files.
* features/sparc/sparc32-cp0.xml, features/sparc/sparc32-cpu.xml,
features/sparc/sparc32-fpu.xml: New files for sparc 32-bit.
* features/sparc/sparc64-cp0.xml, features/sparc/sparc64-cpu.xml,
features/sparc/sparc64-fpu.xml: New files for sparc 64-bit.
* features/sparc/sparc32-solaris.xml: New file.
* features/sparc/sparc64-solaris.xml: New file.
* features/sparc/sparc32-solaris.c: Generated.
* features/sparc/sparc64-solaris.c: Generated.
* sparc-tdep.h: Account for differences in target descriptions.
* sparc-tdep.c (sparc32_register_name): Use target provided registers.
(sparc32_register_type): Use target provided registers.
(validate_tdesc_registers): New function.
(sparc32_gdbarch_init): Use tdesc_has_registers.
Set pseudoregister functions.
* sparc64-tdep.c (sparc64_register_name): Use target provided registers.
(sparc64_register_type): Use target provided registers.
(sparc64_init_abi): Set pseudoregister functions.
gdb/doc/ChangeLog:
2017-02-06 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20936
* gdb.texinfo: (Standard Target Features): Document SPARC features.
(Sparc Features): New node.
gdb/testsuite/ChangeLog:
2017-02-06 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20936
* gdb.xml/tdesc-regs.exp: Provide sparc core registers for the tests.
While looking into PR rust/21097, I found that ptype of a
single-element enum in Rust did not always format the result properly.
In particular, it would leave out the members of a tuple struct.
Further testing showed that it also did the wrong thing for ordinary
struct members as well.
This patch fixes these problems. I'm marking it as being associated
with the PR, since that is where the discovery was made; but this
doesn't actually fix that PR (which I think ultimately is due to a
Rust compiler bug).
Built and regtested on x86-64 Fedora 25, using the system Rust
compiler. I'm checking this in.
2017-02-03 Tom Tromey <tom@tromey.com>
PR rust/21097:
* rust-lang.c (rust_print_type) <TYPE_CODE_UNION>: Handle enums
with a single member.
2017-02-03 Tom Tromey <tom@tromey.com>
PR rust/21097:
* gdb.rust/simple.exp: Add new tests.
- The interp->data field disappears, since we can put data in the
interpreter directly now. The "init" method remains in place, but
it now returns void.
- A few places check if the interpreter method is NULL before calling
it, and also check whether the method returns true/false. For some
of those methods, all current implementations always return true.
In those cases, this commit makes the C++-fied method return void
instead and cleans up the callers.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2017-02-03 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp_base::cli_interp_base)
(cli_interp_base::~cli_interp_base): New.
(cli_interp): New struct.
(as_cli_interp): Cast the interp itself to cli_interp.
(cli_interpreter_pre_command_loop): Rename to ...
(cli_interp_base::pre_command_loop): ... this. Remove 'self'
parameter.
(cli_interpreter_init): Rename to ...
(cli_interp::init): ... this. Remove 'self' parameter. Use
boolean. Make extern.
(cli_interpreter_resume): Rename to ...
(cli_interp::resume): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_suspend): Rename to ...
(cli_interp::suspend): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_exec): Rename to ...
(cli_interp::exec): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_supports_command_editing): Rename to ...
(cli_interp_base::supports_command_editing): ... this. Remove
'interp' parameter. Make extern.
(cli_ui_out): Rename to ...
(cli_interp::interp_ui_out): ... this. Remove 'interp' parameter.
Make extern.
(cli_set_logging): Rename to ...
(cli_interp_base::set_logging): ... this. Remove 'interp'
parameter. Make extern.
(cli_interp_procs): Delete.
(cli_interp_factory): Adjust to use "new".
* cli/cli-interp.h: Include "interps.h".
(struct cli_interp_base): New struct.
* interps.c (struct interp): Delete. Fields moved to interps.h.
(interp_new): Delete.
(interp::interp, interp::~interp): New.
(interp_set): Use bool, and return void. Assume the interpreter
has suspend, init and resume methods, and that the all return
void.
(set_top_level_interpreter): interp_set returns void.
(interp_ui_out): Adapt.
(current_interp_set_logging): Adapt.
(interp_data): Delete.
(interp_pre_command_loop, interp_supports_command_editing): Adapt.
(interp_exec): Adapt.
(top_level_interpreter_data): Delete.
* interps.h (interp_init_ftype, interp_resume_ftype)
(interp_suspend_ftype, interp_exec_ftype)
(interp_pre_command_loop_ftype, interp_ui_out_ftype): Delete.
(class interp): New.
(interp_new): Delete.
(interp_set): Now returns void. Use bool.
(interp_data, top_level_interpreter_data): Delete.
* mi/mi-common.h: Include interps.h.
(class mi_interp): Inherit from interp. Define a ctor. Declare
init, resume, suspect, exec, interp_ui_out, set_logging and
pre_command_loop methods.
* mi/mi-interp.c (as_mi_interp): Cast the interp itself.
(mi_interpreter_init): Rename to ...
(mi_interp::init): ... this. Remove the 'interp' parameter, use
bool, return void and make extern. Adjust.
(mi_interpreter_resume): ... Rename to ...
(mi_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_suspend): ... Rename to ...
(mi_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_exec): ... Rename to ...
(mi_interp::exec): ... this. Remove the 'data' parameter and make
extern. Adjust.
(mi_interpreter_pre_command_loop): ... Rename to ...
(mi_interp::pre_command_loop): ... this. Remove the 'self'
parameter and make extern.
(mi_on_normal_stop_1): Adjust.
(mi_ui_out): Rename to ...
(mi_interp::interp_ui_out): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_set_logging): Rename to ...
(mi_interp::set_logging): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_interp_procs): Delete.
(mi_interp_factory): Adjust to use 'new'.
* mi/mi-main.c (mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_execute_command, mi_load_progress):
Adjust.
* tui/tui-interp.c (tui_interp): New class.
(as_tui_interp): Return a tui_interp pointer.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history, tui_on_user_selected_context_changed): Adjust
to use interp::interp_ui_out.
(tui_init): Rename to ...
(tui_interp::init): ... this. Remove the 'self' parameter, use
bool, return void and make extern. Adjust.
(tui_resume): Rename to ...
(tui_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_suspend): Rename to ...
(tui_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_ui_out): Rename to ...
(tui_interp::interp_ui_out): ... this. Remove the 'self'
parameter, and make extern. Adjust.
(tui_exec): Rename to ...
(tui_interp::exec): ... this. Remove the 'data' parameter and
make extern.
(tui_interp_procs): Delete.
(tui_interp_factory): Use "new".
This changes various functions in the Rust code to use a bool rather
than an int when a boolean is intended.
2017-02-02 Tom Tromey <tom@tromey.com>
* rust-exp.y (ends_raw_string, space_then_number)
(rust_identifier_start_p): Return bool.
* rust-lang.c (rust_tuple_type_p, rust_underscore_fields)
(rust_tuple_struct_type_p, rust_tuple_variant_type_p)
(rust_slice_type_p, rust_range_type_p, rust_u8_type_p)
(rust_chartype_p): Return bool.
(val_print_struct, rust_print_struct_def, rust_print_type):
Update.
* rust-lang.h (rust_tuple_type_p, rust_tuple_struct_type_p):
Return bool.
This changes a couple of spots in the Rust support to use std::string.
In one spot this removes some manual memory management; in the other
spot this allows the removal of a call to xstrdup.
2017-02-02 Tom Tromey <tom@tromey.com>
* rust-lang.h (rust_crate_for_block): Update.
* rust-lang.c (rust_crate_for_block): Return std::string.
(rust_get_disr_info): Use std:;string, not
gdb::unique_xmalloc_ptr.
* rust-exp.y (crate_name): Update.
The "maintenance selftest" command is printing odd bits of stray
instructions like:
~~~
brkwarning: A handler for the OS ABI "GNU/Linux" is not built into this configuration
of GDB. Attempting to continue with the default HS settings.
brkmov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0breakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakM3.L = 0xffff;/* ( -1) M3=0x0xffff(65535) */break 8break 8warning: A handler for the OS ABI "GNU/Linux" is not built into this configuration
of GDB. Attempting to continue with the default cris:common_v10_v32 settings.
~~~
etc. Those appear because here:
class gdb_disassembler_test : public gdb_disassembler
{
public:
const bool verbose = false;
explicit gdb_disassembler_test (struct gdbarch *gdbarch,
const gdb_byte *insn,
size_t len)
: gdb_disassembler (gdbarch,
(verbose ? gdb_stdout : &null_stream),
gdb_disassembler_test::read_memory),
specifically in this line:
(verbose ? gdb_stdout : &null_stream),
"verbose" has not been initialized yet, because the order of
initialization is base classes first, then members. I.e. "verbose" is
only initialized after the base constructor is called. Since the
gdb_disassembler_test object is created on the stack, "verbose" has
garbage at that point. If the gargage is non-zero, then we end up
with the gdb_disassembler_test's stream incorrectly pointing to
gdb_stdout.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm-selftests.c (print_one_insn_test): Move the "verbose"
field out of gdb_disassembler_test and make it static.
This patch gets rid of this hack in mi_set_logging:
/* The tee created already is based on gdb_stdout, which for MI
is a console and so we end up in an infinite loop of console
writing to ui_file writing to console etc. So discard the
existing tee (it hasn't been used yet, and MI won't ever use
it), and create one based on raw_stdout instead. */
By pushing down responsibility for the tee creation to the
interpreter. I.e., pushing the CLI bits out of handle_redirections
down to the CLI interpreter's set_logging_proc method.
This fixes a few leaks that I spotted, and then confirmed with
"valgrind --leak-check=full":
[...]
==21429== 56 (32 direct, 24 indirect) bytes in 1 blocks are definitely lost in loss record 30,243 of 34,980
==21429== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334)
==21429== by 0x62D9A9: mi_set_logging(interp*, int, ui_file*, ui_file*) (mi-interp.c:1395)
==21429== by 0x810B8A: current_interp_set_logging(int, ui_file*, ui_file*) (interps.c:360)
==21429== by 0x61C537: handle_redirections(int) (cli-logging.c:162)
==21429== by 0x61C6EC: set_logging_on(char*, int) (cli-logging.c:190)
==21429== by 0x6163BE: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:105)
==21429== by 0x6193C1: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1913)
==21429== by 0x8DB790: execute_command(char*, int) (top.c:674)
==21429== by 0x632AE6: mi_execute_cli_command(char const*, int, char const*) (mi-main.c:2343)
==21429== by 0x6329BA: mi_cmd_execute(mi_parse*) (mi-main.c:2306)
==21429== by 0x631E19: captured_mi_execute_command(ui_out*, mi_parse*) (mi-main.c:1998)
==21429== by 0x632389: mi_execute_command(char const*, int) (mi-main.c:2163)
==21429==
[...]
==26635== 24 bytes in 1 blocks are definitely lost in loss record 20,740 of 34,995
==26635== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334)
==26635== by 0x61C355: handle_redirections(int) (cli-logging.c:131)
==26635== by 0x61C6EC: set_logging_on(char*, int) (cli-logging.c:190)
==26635== by 0x6163BE: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:105)
==26635== by 0x6193C1: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1913)
==26635== by 0x8DB7BC: execute_command(char*, int) (top.c:674)
==26635== by 0x7B9132: command_handler(char*) (event-top.c:590)
==26635== by 0x7B94F7: command_line_handler(char*) (event-top.c:780)
==26635== by 0x7B8ABB: gdb_rl_callback_handler(char*) (event-top.c:213)
==26635== by 0x933CE9: rl_callback_read_char (callback.c:220)
==26635== by 0x7B89ED: gdb_rl_callback_read_char_wrapper_noexcept() (event-top.c:175)
==26635== by 0x7B8A49: gdb_rl_callback_read_char_wrapper(void*) (event-top.c:192)
One is fixed by transfering ownership of the log file to the tee. In
pseudo-patch, since the code was moved at the same time:
- out = new tee_file (curr_output, false, logfile.get (), false);
+ out = new tee_file (curr_output, false, logfile.get (), true);
The other is this bit in mi_set_logging:
else
{
+ delete mi->raw_stdout;
I tried to split the leak fixes to a smaller preparatory patch, but
that was difficult exactly because of the tee hack in
handle_redirections -> mi_set_logging.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (struct saved_output_files, saved_output):
Moved from cli/cli-logging.c.
(cli_set_logging): New function.
(cli_interp_procs): Install cli_set_logging.
* cli/cli-interp.h (make_logging_output, cli_set_logging):
Declare.
* cli/cli-logging.c (struct saved_output_files, saved_output):
Moved to cli/cli-interp.c.
(pop_output_files): Don't save outputs here.
(make_logging_output): New function.
(handle_redirections): Don't build tee nor save previous outputs
here.
* interps.c (current_interp_set_logging): Change prototype.
Assume there's always a set_logging_proc method installed.
* interps.h (interp_set_logging_ftype): Change prototype.
(current_interp_set_logging): Change prototype and adjust comment.
* mi/mi-interp.c (mi_set_logging): Change protototype. Adjust to
use make_logging_output.
* tui/tui-interp.c (tui_interp_procs): Install cli_set_logging.
This commit fixes a "-gdb-set logging redirect on" crash by not
handling "logging redirect on" on the fly.
Previous discussion here:
https://sourceware.org/ml/gdb-patches/2017-01/msg00467.html
Code for handling "logging redirect on" on the fly was added here:
https://sourceware.org/ml/gdb-patches/2010-08/msg00202.html
Meanwhile, MI gained support for logging, but flipping redirect "on"
on the fly was not considered. The result is that this sequence of
commands crashes GDB:
-gdb-set logging on
-gdb-set logging redirect on
Program received signal SIGSEGV, Segmentation fault.
0x00000000008dd7bc in gdb_flush (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95
194 file->to_flush (file);
(top-gdb) bt
#0 0x00000000008dd7bc in gdb_flush(ui_file*) (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95
#1 0x00000000007b5f34 in gdb_wait_for_event(int) (block=0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:752
#2 0x00000000007b52b6 in gdb_do_one_event() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:322
#3 0x00000000007b5362 in start_event_loop() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:371
#4 0x000000000082704a in captured_command_loop(void*) (data=0x0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:325
#5 0x00000000007b8d7c in catch_errors(int (*)(void*), void*, char*, return_mask) (func=0x827008 <captured_command_loop(void*)>, func_args=0x0, errstring=0x11dee51 "", mask=RETURN_MASK_ALL) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/exceptions.c:236
#6 0x000000000082839b in captured_main(void*) (data=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1148
During symbol reading, cannot get low and high bounds for subprogram DIE at 24065.
#7 0x00000000008283c4 in gdb_main(captured_main_args*) (args=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1158
#8 0x0000000000412d4d in main(int, char**) (argc=4, argv=0x7fffffffd928) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/gdb.c:32
The handling of redirect on the fly is not really a use case we need
to handle, IMO. Its inconsistent (other "set logging foo" commands
aren't handled on the fly), and complicates the code significantly.
Instead of complicating it further for MI, go back to the original
idea of warning, only:
https://sourceware.org/ml/gdb-patches/2010-08/msg00083.html
New test included.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* cli/cli-logging.c (maybe_warn_already_logging): New factored out
from ...
(set_logging_overwrite): ... here.
(logging_no_redirect_file): Delete.
(set_logging_redirect): Don't handle redirection on the fly.
Instead warn that "logging off" / "logging on" is necessary.
(pop_output_files): Delete references to logging_no_redirect_file.
(show_logging_command): Always speak in terms of what will happen
once logging is reenabled.
gdb/testsuite/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-logging.exp: Add "redirect while already logging"
tests.
gdb_pretty_print_insn allocates and destroys a couple local buffers
each time it is called, which can be many times when disassembling a
region of memory. Avoid that overhead by adding a new class that
holds the buffers and making gdb_pretty_print_insn a method of that
class, so that the buffers can be reused across calls.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_pretty_print_insn): Rename to ...
(gdb_pretty_print_disassembler::pretty_print_insn): ... this.
Remove gdbarch parameter. Adapt to clear the object's buffers
instead of allocating new buffers, and to print using the object's
gdb_disassembler instead of calling gdb_print_insn.
(dump_insns): Use gdb_pretty_print_disassembler.
* disasm.h (gdb_pretty_print_insn): Delete declaration.
(gdb_pretty_print_disassembler): New class.
* record-btrace.c (btrace_insn_history): Use
gdb_pretty_print_disassembler.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
ui_file_rewind is a ui_file method that only really works with mem
buffer files, and is a nop on other ui_file types. It'd be desirable
to eliminate it from the base ui_file interface, and move it to the
"mem_fileopen" subclass of ui_file instead. A following patch does
just that.
Unfortunately, there are a couple references to ui_file_rewind inside
gdb_disassembler::pretty_print_insn that were made harder to eliminate
with the recent addition of the gdb_disassembler wrapper.
Before the gdb_disassembler wrapper was added, in commit
e47ad6c0bd ("Refactor disassembly code"), gdb_pretty_print_insn
used to be passed a ui_file pointer as argument, and it was simple to
adjust that pointer be a "mem_fileopen" ui_file pointer instead, since
there's only one gdb_pretty_print_insn caller.
That commit made gdb_pretty_print_insn be a method of
gdb_disassembler, and removed the method's ui_file parameter at the
same time, replaced by referencing the gdb_disassembler's stream
instead. The trouble is that a gdb_disassembler can be instantiated
with a pointer any kind of ui_file. Casting the gdb_disassembler's
stream to a mem_fileopen ui_file inside
gdb_disassembler::pretty_print_insn in order to call the reset method
would be gross hack.
The fix here is to:
- make gdb_disassembler::pretty_print_insn a be free function again
instead of a method of gdb_disassembler. I.e., bring back
gdb_pretty_print_insn.
- but, don't add back the ui_file * parameter. Instead, move the
mem_fileopen allocation inside. That is a better interface, given
that the ui_file is only ever used as temporary scratch buffer as
an implementation detail of gdb_pretty_print_insn. The function's
real "where to send output" parameter is the ui_out pointer. (A
following patch will add back buffer reuse across invocations
differently).
- don't add back a disassemble_info pointer either. That used to be
necessary for this bit:
err = m_di.read_memory_func (pc, &data, 1, &m_di);
if (err != 0)
m_di.memory_error_func (err, pc, &m_di);
... but AFAIK, it's not really necessary. We can replace those
three lines with a call to read_code. This seems to fix a
regression even, because before commit d8b49cf0c8 ("Don't throw
exception in dis_asm_memory_error"), that memory_error_func call
would throw an error/exception, but now it only records the error
in the gdb_disassembler's m_err_memaddr field. (read_code throws
on error.)
With all these, gdb_pretty_print_insn is completely layered on top of
gdb_disassembler only using the latter's public API.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_disassembler::pretty_print_insn): Rename to...
(gdb_pretty_print_insn): ... this. Now a free function. Add back
a 'gdbarch' parameter. Allocate a mem_fileopen stream here.
Adjust to call gdb_print_insn instead of
gdb_disassembler::print_insn.
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only): Add back a
'gdbarch' parameter. Remove gdb_disassembler parameter.
(gdb_disassembly): Don't allocate a gdb_disassembler here.
* disasm.h (gdb_disassembler::pretty_print_insn): Delete
declaration.
(gdb_pretty_print_insn): Re-add declaration.
* record-btrace.c (btrace_insn_history): Don't allocate a
gdb_disassembler here. Adjust to call gdb_pretty_print_insn.
The file_string parameter was added in 8f0eea0 (sorry, no title back
then) and has never actually been used.
gdb/ChangeLog:
* disasm.h (gdb_disassembly): Remove file_string parameter.
* disasm.c (gdb_disassembly): Likewise.
* cli/cli-cmds.c (print_disassembly): Adapt.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* stack.c (do_gdb_disassembly): Likewise.
When a variable's location is expressed as DW_OP_implicit_value, but the
given value is longer than needed, which bytes should be used? GDB's
current logic was introduced with a patch from 2011 and uses the "least
significant" bytes:
https://sourceware.org/ml/gdb-patches/2011-08/msg00123.html
Now consider a sub-value from such a location at a given offset, accessed
through DW_OP_implicit_pointer. Which bytes should be used for that? The
patch above *always* uses the last bytes on big-endian targets, ignoring
the offset.
E.g., given the code snippet
const char foo[] = "Hello, world!";
const char *a = &foo[0];
const char *b = &foo[7];
assume that `foo' is described as DW_OP_implicit_value and `a' and `b'
each as DW_OP_implicit_pointer into that value. Then with current GDB
`*a' and `*b' yield the same result -- the string's zero terminator.
This patch basically reverts the portion of the patch above that deals
with DW_OP_implicit_value. This fixes the offset handling and also goes
back to dropping the last instead of the first bytes on big-endian targets
if the implicit value is longer than needed. The latter aspect of the
change probably doesn't matter for actual programs, but simplifies the
logic.
The patch also cleans up the original code a bit and adds appropriate test
cases.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-op-stack-value.exp: Adjust expected result of
taking a 2-byte value out of a 4-byte DWARF implicit value on
big-endian targets.
* gdb.dwarf2/nonvar-access.exp: Add more comments to existing
logic. Add test cases for DW_OP_implicit.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): For
DWARF_VALUE_LITERAL, no longer ignore the offset on big-endian
targets. And if the implicit value is longer than needed, extract
the first bytes instead of the "least significant" ones.
When recording is started for a running thread, GDB was able to start tracing
but then failed to read registers to insert the initial entry for the current
PC. We don't really need that initial entry if we don't know where exactly we
started recording. Skip that step to allow recording to be started while
threads are running.
If we do run into errors, we need to undo the tracing enable to not leak this
thread. The operation did not complete so our caller won't clean up this
thread.
For the BTRACE_FORMAT_PT btrace format, we don't need that initial entry since
it will be recorded in the trace. We can omit the call to btrace_add_pc.
gdb/
* btrace.c (btrace_enable): Do not call btrace_add_pc for
BTRACE_FORMAT_PT or if can_access_registers_ptid returns false.
(btrace_fetch): Assert can_access_registers_ptid.
* record-btrace.c (require_btrace_thread, record_btrace_info): Call
validate_registers_access.
testsuite/
* gdb.btrace/enable-running.c: New.
* gdb.btrace/enable-running.exp: New.
Add a function can_access_registers_ptid that behaves like
validate_registers_access but returns a boolean value instead of throwing an
exception.
gdb/
* gdbthread.h (can_access_registers_ptid): New.
* thread.c (can_access_registers_ptid): New.
Whoops, this function returns a std::string.
gdb/ChangeLog:
2017-01-31 Pedro Alves <palves@redhat.com>
* varobj.c (varobj_value_get_print_value): Remove xstrdup call.
A following patch will want to do
string_file str_file;
scoped_restore save_stdout
= make_scoped_restore (&gdb_stdout, &str_file);
where gdb_stdout is a ui_file *, and string_file is a type that
inherits from ui_file, but that doesn't compile today:
src/gdb/top.c: In function ‘std::__cxx11::string execute_command_to_string(char*, int)’:
src/gdb/top.c:710:50: error: no matching function for call to ‘make_scoped_restore(ui_file**, string_file*)’
= make_scoped_restore (&gdb_stdout, &str_file);
^
[...]
In file included from src/gdb/utils.h:25:0,
from src/gdb/defs.h:732,
from src/gdb/top.c:20:
src/gdb/common/scoped_restore.h:94:24: note: candidate: template<class T> scoped_restore_tmpl<T> make_scoped_restore(T*, T)
scoped_restore_tmpl<T> make_scoped_restore (T *var, T value)
^
src/gdb/common/scoped_restore.h:94:24: note: template argument deduction/substitution failed:
src/gdb/top.c:710:50: note: deduced conflicting types for parameter ‘T’ (‘ui_file*’ and ‘string_file*’)
= make_scoped_restore (&gdb_stdout, &str_file);
^
This commit makes code such as the above possible.
gdb/ChangeLog:
2017-01-31 Pedro Alves <palves@redhat.com>
* common/scoped_restore.h
(scoped_restore_tmpl::scoped_restore_tmpl): Template on T2, and
change the value's parameter type to T2.
(make_scoped_restore): Likewise.
This patch allows examination of the registers FS_BASE and GS_BASE
for Linux Systems running on 64bit. Tests for simple read and write
of the new registers is also added with this patch.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
Richard Henderson <rth@redhat.com>
gdb/ChangeLog:
* amd64-linux-nat.c (PTRACE_ARCH_PRCTL): New define.
(amd64_linux_fetch_inferior_registers): Add case to fetch FS_BASE
GS_BASE for older kernels.
(amd64_linux_store_inferior_registers): Add case to store FS_BASE
GS_BASE for older kernels.
* amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Add FS_BASE
and GS_BASE to the offset table.
(amd64_linux_register_reggroup_p): Add FS_BASE and GS_BASE to the
system register group.
* amd64-nat.c (amd64_native_gregset_reg_offset): Implements case
for older kernels.
* amd64-tdep.c (amd64_init_abi): Add segment registers for the
amd64 ABI.
* amd64-tdep.h (amd64_regnum): Add AMD64_FSBASE_REGNUM and
AMD64_GSBASE_REGNUM.
(AMD64_NUM_REGS): Set to AMD64_GSBASE_REGNUM + 1.
* features/Makefile (amd64-linux.dat, amd64-avx-linux.dat)
(amd64-mpx-linux.dat, amd64-avx512-linux.dat, x32-linux.dat)
(x32-avx-linux.dat, x32-avx512-linux.dat): Add
i386/64bit-segments.xml in those rules.
* features/i386/64bit-segments.xml: New file.
* features/i386/amd64-avx-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx.c: Regenerated.
* features/i386/amd64-avx512-linux.c: Regenerated.
* features/i386/amd64-linux.c: Regenerated.
* features/i386/amd64-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx.c: Regenerated.
* features/i386/x32-avx-linux.c: Regenerated.
* features/i386/x32-avx512-linux.c: Regenerated.
* regformats/i386/amd64-avx-linux.dat: Regenerated.
* regformats/i386/amd64-avx-mpx-linux.dat: Regenerated.
* regformats/i386/amd64-avx512-linux.dat: Regenerated.
* regformats/i386/amd64-linux.dat: Regenerated.
* regformats/i386/amd64-mpx-linux.dat: Regenerated.
* regformats/i386/x32-avx-linux.dat: Regenerated.
* regformats/i386/x32-avx512-linux.dat: Regenerated.
* regformats/i386/x32-linux.dat: Regenerated.
gdb/doc/ChangeLog:
* gdb.texinfo (i386 Features): Add system segment registers
as feature.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_64_regmap): Add fs_base and gs_base
to the register table.
(x86_fill_gregset): Add support for old kernels for the
fs_base and gs_base system registers.
(x86_store_gregset): Likewise.
* configure.srv (srv_i386_64bit_xmlfiles): Add 64bit-segments.xml.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-gs_base.c: New file.
* gdb.arch/amd64-gs_base.exp: New file.
Change-Id: I2e0eeb93058a2320d4d3b045082643cfe4aff963
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
The purpose of this patch is only simplify the addition of new registers.
ORIG_RAX is kept as last register and any addition is done right before it.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM):
Set to AMD64_NUM_REGS.
Second part of the && is already guaranteed in the "regnum < num_regs"
due to comparison above.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-nat.c (amd64_native_gregset_reg_offset): Simplify logic
that checks validity of a register number.
When running a 32-bit ARM inferior with a 32-bit ARM GDB on a 64-bit
AArch64 host, only VFP registers (NT_ARM_VFP) are available. The FPA
registers (NT_PRFPREG) are not available so GDB must not request them, as
this will fail with -EINVAL. This is most noticeably exposed when running
"generate-core-file":
(gdb) generate-core-file myprog.core
Unable to fetch the floating point registers.: Invalid argument.
ptrace(PTRACE_GETREGSET, 27642, NT_FPREGSET, 0xffcc67f0) = -1 EINVAL (Invalid argument)
gdb/ChangeLog:
2017-01-27 Kees Cook <keescook@google.com>
* gdb/arm-linux-nat.c (arm_linux_fetch_inferior_registers): Call
fetch_fpregs if target has fpa registers.
(arm_linux_store_inferior_registers): Call store_fpregs if target
has fpa registers.
The all-architectures-1.exp test case currently yields 66 FAILs on s390x,
because the "set architecture" command fails each time when attempting to
switch to "cris", "crisv32", or "cris:common_v10_v32". Actually, the
command would succeed if the endianness had been set to "little" before.
Instead, the test case sets the endianness to "auto", which results in
"big" on s390x.
So on x86_64:
(gdb) set endian auto
The target endianness is set automatically (currently little endian)
(gdb) set architecture cris
warning: A handler for the OS ABI "AIX" is not built into this configuration
of GDB. Attempting to continue with the default cris settings.
The target architecture is assumed to be cris
But on s390x:
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture cris
Architecture `cris' not recognized.
See also the test results for s390x and ppc64be:
https://sourceware.org/ml/gdb-testers/2016-q4/msg05150.htmlhttps://sourceware.org/ml/gdb-testers/2016-q4/msg05713.html
Indeed, cris_gdbarch_init in cris-tdep.c returns a failure unless the
user-specified endianness is "little". Other architectures usually ignore
the user-specified endianness and return a valid gdbarch anyhow, even if
they can not really cope with the given endianness.
This patch removes the check in cris-tdep.c and forces little-endian byte
order instead.
gdb/ChangeLog:
* cris-tdep.c (cris_gdbarch_init): Remove check for
info.byte_order and force it to BFD_ENDIAN_LITTLE.
When loading a core without an executable like so:
$ gdb --core core
for example often the gdbarch won't contain the
iterate_over_regset_sections method. For example on ARM.
This will generate a call to get_core_register_section with a NULL regset
like at corelow.c:628
get_core_register_section (regcache, NULL, ".reg", 0, 0, "general-purpose", 1);
However a check for REGSET_VARIABLE_SIZE in get_core_register_section
assumes that regset is != NULL thus leading to a crash with this backtrace:
(gdb) bt
#0 0x000000000065907b in get_core_register_section
(regcache=regcache@entry=0x2c26260, regset=regset@entry=0x0,
name=name@entry=0xdbf7b2 ".reg", min_size=min_size@entry=0,
which=which@entry=0, human_name=human_name@entry=0xdbac28
"general-purpose", required=1)
at ../../gdb/corelow.c:542
#1 0x0000000000659b70 in get_core_registers (ops=<optimized out>,
regcache=0x2c26260, regno=<optimized out>) at ../../gdb/corelow.c:628
#2 0x000000000076e5fb in target_fetch_registers
(regcache=regcache@entry=0x2c26260, regno=regno@entry=15)
at ../../gdb/target.c:3590
Note that commit: f962539ad2 ("Warn if core file register
section is larger than expected") introduced this issue.
Thus releases > 7.8.2 are affected.
Also, this would have been caught by gdb.base/corefile.exp but the
problem is that this triggers only if the core dump is missing some data
so that it's not recognized as a linux core dump, or it's not a linux core
dump and the core file register section is larger than expected.
So if you just create a core and read it on linux with ARM the osabi is
detected properly and iterate_over_regset_sections is present and so the
problem is not triggered.
Thus creating a linux test for this with a crafted core that meets the
problem requirements is non-trivial.
This patch fixes this crash by adding a check for regset existence before
running the condition.
gdb/ChangeLog:
* corelow.c (get_core_register_section): Check for regset
existence before checking for REGSET_VARIABLE_SIZE.
Hi,
GDB calls some APIs from opcodes to do disassembly and provide some
call backs. This model makes troubles on C++ exception unwinding,
because GDB is a C++ program, and opcodes is still compiled as C.
As we can see, frame #10 and #12 are C++, while #frame 11 is C,
#10 0x0000000000544228 in memory_error (err=TARGET_XFER_E_IO, memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:237
#11 0x00000000006b0a54 in print_insn_aarch64 (pc=0, info=0xffffffffeeb0) at ../../binutils-gdb/opcodes/aarch64-dis.c:3185
#12 0x0000000000553590 in gdb_pretty_print_insn (gdbarch=gdbarch@entry=0xbbceb0, uiout=uiout@entry=0xbc73d0, di=di@entry=0xffffffffeeb0,
insn=0xffffffffed40, insn@entry=0xffffffffed90, flags=flags@entry=0,
C++ exception unwinder can't go across frame #11 unless it has
unwind table. However, C program on many architectures doesn't
have it in default. As a result, GDB aborts, which is described
in PR 20939.
This is not the first time we see this kind of problem. We've
had a commit 89525768cd
"Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH".
We can fix the disassembly bug in a similar way, this is the option one.
Since opcodes is built with gdb, we fix this problem in a different
way as we did for the same issue with readline. Instead of throwing
exception in dis_asm_memory_error, we record the failed memory
address, and throw exception when GDB returns from opcodes disassemblers.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
PR gdb/20939
* disasm.c (gdb_disassembler::dis_asm_memory_error): Don't
call memory_error, save memaddr instead.
(gdb_disassembler::print_insn): If gdbarch_print_insn returns
negative, cal memory_error.
* disasm.h (gdb_disassembler) <m_err_memaddr>: New field.
gdb/testsuite:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in (do_arch_tests): Test
disassemble on address 0.
This patch adds a unit test about memory error occurs on reading
memory, and check MEMORY_ERROR exception is always thrown.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm-selftests.c (memory_error_test): New function.
(_initialize_disasm_selftests): Register memory_error_test.
This patch adds one unit test, which disassemble one instruction for
every gdbarch if available. The test needs one valid instruction of
each gdbarch, and most of them are got from breakpoint instruction.
For the rest gdbarch whose breakpoint instruction isn't a valid
instruction, I copy one instruction from the gas/testsuite/gas/
directory.
I get the valid instruction of most gdbarch except ia64, mep, mips,
tic6x, and xtensa. People familiar with these arch should be easy
to extend the test.
In order to achieve "do the unit test for every gdbarch", I add
selftest-arch.[c,h], so that we can register a function pointer,
which has one argument gdbarch. selftest.c will iterate over all
gdbarches to call the registered function pointer.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add disasm-selftests.c and
selftest-arch.c.
(COMMON_OBS): Add disasm-selftests.o and selftest-arch.o.
* disasm-selftests.c: New file.
* selftest-arch.c: New file.
* selftest-arch.h: New file.
opcodes/mep-dis.c:mep_print_insn has already had the code to
handle the case when info->section is NULL,
/* Picking the right ISA bitmask for the current context is tricky. */
if (info->section)
{
}
else /* sid or gdb */
{
}
so that we can still cal print_insn_mep even section can't be found.
On the other hand, user can disassemble an arbitrary address which
doesn't map to any section at all.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* mep-tdep.c (mep_gdb_print_insn): Set info->arch
to bfd_arch_mep. Don't return 0 if section is not
found. Call print_insn_mep.
This patch addes class gdb_disassembler, and refactor
code to use it. The gdb_disassembler object is saved
in disassember_info.application_data. However,
disassember_info.application_data is already used by
gdb for arm, mips spu, and scm-disasm. In arm and mips,
.application_data is gdbarch, but we can still get gdbarch
from gdb_disassember.
The use of application_data in spu is a little bit
complicated. It creates its own disassemble_info, and
save spu_dis_asm_data in .application_data. This will
overwrite the pointer to gdb_disassembler, so we need
to find another place to save spu_dis_asm_data. I
extend disassemble_info, and put "id" there.
gdb:
2017-01-26 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Include "disasm.h".
(gdb_print_insn_arm): Update code to get gdbarch.
* disasm.c (dis_asm_read_memory): Change it to
gdb_disassembler::dis_asm_read_memory.
(dis_asm_memory_error): Likewise.
(dis_asm_print_address): Likewise.
(gdb_pretty_print_insn): Change it to
gdb_disassembler::pretty_print_insn.
(dump_insns): Add one argument gdb_disassemlber. All
callers updated.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
(do_assembly_only): Likewise.
(gdb_disassembler::gdb_disassembler): New.
(gdb_disassembler::print_insn): New.
* disasm.h (class gdb_disassembler): New.
(gdb_pretty_print_insn): Remove declaration.
(gdb_disassemble_info): Likewise.
* guile/scm-disasm.c (class gdbscm_disassembler): New.
(gdbscm_disasm_read_memory_worker): Update.
(gdbscm_disasm_read_memory): Update.
(gdbscm_disasm_memory_error): Remove.
(gdbscm_disasm_print_address): Remove.
(gdbscm_disassembler::gdbscm_disassembler): New.
(gdbscm_print_insn_from_port): Update.
* mips-tdep.c: Include disasm.h.
(gdb_print_insn_mips): Update code to get gdbarch.
* record-btrace.c (btrace_insn_history): Update.
* spu-tdep.c: Include disasm.h.
(struct spu_dis_asm_data): Remove.
(struct spu_dis_asm_info): New.
(spu_dis_asm_print_address): Use spu_dis_asm_info to get
SPU id.
(gdb_print_insn_spu): Cast disassemble_info to
spu_dis_asm_info.
This patch adds a new function null_stream, which returns a null
stream. The null stream can be used in multiple places. It is
used in gdb_insn_length, and the following patches will use it too.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm.c (do_ui_file_delete): Delete.
(gdb_insn_length): Move code creating stream to ...
* utils.c (null_stream): ... here. New function.
* utils.h (null_stream): Declare.
Since the reference to the Inferior Python object is managed by
gdbpy_ref (RAII), we can return directly from the loop. It's just a
leftover from the cleanups era.
gdb/ChangeLog:
* python/py-inferior.c (find_thread_object): Return directly
from the loop. Remove "found" variable.
When the gdbpy_ref objects get destroyed, they call Py_DECREF to
decrement the reference counter of the python object they hold a
reference to. Any time we call into the Python API, we should be
holding the GIL. The gdbpy_enter object does that for us in an
RAII-fashion.
However, if gdbpy_enter is declared after a gdbpy_ref object in a
function, gdbpy_enter's destructor will be called (and the GIL will be
released) before gdbpy_ref's destructor is called. Therefore, we will
end up calling Py_DECREF without holding the GIL.
This became obvious with Python 3.6, where memory management functions
have asserts to make sure that the GIL is held. This was exposed by
tests py-as-string.exp, py-function.exp and py-xmethods. For example:
(gdb) p $_as_string(enum_valid)
Fatal Python error: Python memory allocator called without holding the GIL
Current thread 0x00007f7f7b21c780 (most recent call first):
[1] 18678 abort (core dumped) ./gdb -nx testsuite/outputs/gdb.python/py-as-string/py-as-string
#0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457
#3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994
#5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442
#6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369
#7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431
#8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#9 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e652c0 <_PyMem_Debug+96>, ptr=0x7ffff46b6040) at Objects/obmalloc.c:1994
#10 0x00007ffff6a38f55 in PyObject_Free (ptr=<optimized out>) at Objects/obmalloc.c:503
#11 0x00007ffff6a5f27e in unicode_dealloc (unicode=unicode@entry=0x7ffff46b6040) at Objects/unicodeobject.c:1794
#12 0x00007ffff6a352a9 in _Py_Dealloc (op=0x7ffff46b6040) at Objects/object.c:1786
#13 0x000000000063f28b in gdb_Py_DECREF (op=0x7ffff46b6040) at /home/emaisin/src/binutils-gdb/gdb/python/python-internal.h:192
#14 0x000000000063fa33 in gdbpy_ref_policy::decref (ptr=0x7ffff46b6040) at /home/emaisin/src/binutils-gdb/gdb/python/py-ref.h:35
#15 0x000000000063fa77 in gdb::ref_ptr<_object, gdbpy_ref_policy>::~ref_ptr (this=0x7fffffffcdf0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/common/gdb_ref_ptr.h:91
#16 0x000000000064d8b8 in fnpy_call (gdbarch=0x2b50010, language=0x115d2c0 <c_language_defn>, cookie=0x7ffff46b7468, argc=1, argv=0x7fffffffcf48)
at /home/emaisin/src/binutils-gdb/gdb/python/py-function.c:145
The fix is to place the gdbpy_enter first in the function. I also
cleaned up the comments a bit and removed the unnecessary initialization
of the value variable.
gdb/ChangeLog:
* python/py-function.c (fnpy_call): Reorder declarations to have
the gdbpy_enter object declared first.
* python/py-xmethods.c (gdbpy_get_xmethod_arg_types): Likewise.
New in v2:
- Define PyMem_RawMalloc as PyMem_Malloc for Python < 3.4 and use
PyMem_RawMalloc in the code.
Since Python 3.4, the callback installed in PyOS_ReadlineFunctionPointer
should return a value allocated with PyMem_RawMalloc instead of
PyMem_Malloc. The reason is that PyMem_Malloc must be called with the
Python Global Interpreter Lock (GIL) held, which is not the case in the
context where this function is called. PyMem_RawMalloc was introduced
for cases like this.
In Python 3.6, it looks like they added an assert to verify that
PyMem_Malloc was not called without the GIL. The consequence is that
typing anything in the python-interactive mode of gdb crashes the
process. The same behavior was observed with the official package on
Arch Linux as well as with a manual Python build on Ubuntu 14.04.
This is what is shown with a debug build of Python 3.6 (the error with a
non-debug build is far less clear):
(gdb) pi
>>> print(1)
Fatal Python error: Python memory allocator called without holding the GIL
Current thread 0x00007f1459af8780 (most recent call first):
[1] 21326 abort ./gdb
and the backtrace:
#0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457
#3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994
#5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442
#6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369
#7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431
#8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#9 0x00007ffff6a37aa3 in _PyMem_DebugMalloc (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, nbytes=5) at Objects/obmalloc.c:1980
#10 0x00007ffff6a38d91 in PyMem_Malloc (size=<optimized out>) at Objects/obmalloc.c:418
#11 0x000000000064dbe2 in gdbpy_readline_wrapper (sys_stdin=0x7ffff6514640 <_IO_2_1_stdin_>, sys_stdout=0x7ffff6514400 <_IO_2_1_stdout_>, prompt=0x7ffff4d4f7d0 ">>> ")
at /home/emaisin/src/binutils-gdb/gdb/python/py-gdb-readline.c:75
The documentation is very clear about it [1] and it was also mentioned
in the "What's New In Python 3.4" page [2].
[1] https://docs.python.org/3/c-api/veryhigh.html#c.PyOS_ReadlineFunctionPointer
[2] https://docs.python.org/3/whatsnew/3.4.html#changes-in-the-c-api
gdb/ChangeLog:
* python/python-internal.h (PyMem_RawMalloc): Define for
Python < 3.4.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Use
PyMem_RawMalloc instead of PyMem_Malloc.
Changes in v4:
- Replaced phex call with hex_string.
Changes in v3:
- Addressed comments by Pedro.
- Output of memory region size now in hex format.
- Misc formatting fixups.
- Addressed Simon's comments on formatting.
- Adjusted command text in the manual entry.
- Fixed up ChangeLog.
- Renamed flash_erase_all_command to flash_erase_command.
Changes in v2:
- Added NEWS entry.
- Fixed long lines.
- Address printing with paddress.
Years ago we contributed flash programming patches upstream. The following
patch is a leftover one that complements that functionality by adding a new
command to erase all reported flash memory blocks.
The command is most useful when we're dealing with flash-enabled targets
(mostly bare-metal) and we need to reset the board for some reason.
The wiping out of flash memory regions should help the target come up with a
known clean state from which the user can load a new image and resume
debugging. It is convenient enough to do this from the debugger, and there is
also an MI command to expose this functionality to the IDE's.
gdb/doc/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (-target-flash-erase): New MI command description.
(flash-erase): New CLI command description.
gdb/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* NEWS (New commands): Mention flash-erase.
(New MI commands): Mention target-flash-erase.
* mi/mi-cmds.c (mi_cmd_target_flash_erase): Add target-flash-erase MI
command.
* mi/mi-cmds.h (mi_cmd_target_flash_erase): New declaration.
* mi/mi-main.c (mi_cmd_target_flash_erase): New function.
* target.c (flash_erase_command): New function.
(initialize_targets): Add new flash-erase command.
* target.h (flash_erase_command): New declaration.
The following change replaced an include of gregset.h by
an include of <sys/procfs.h>:
commit 39b2247157
Date: Thu Aug 11 12:01:22 2016 +0100
Subject: Fix fallout from gdb/20413's fix
(x32: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER)
Unfortunately, this broke gdbserver on Android, because that file
does not exist on this platform. This patch fixes the issue by
conditionalizing its include with HAVE_SYS_PROCFS_H (which we check
both in gdb/configure and gdbserver/configure).
gdb/ChangeLog:
* nat/linux-ptrace.c: Only include <sys/procfs.h> if
HAVE_SYS_PROCFS_H is defined.
Tested by rebuilding gdbserver on arm-android and GNU/Linux.
2017-01-18 Alan Hayward <alan.hayward@arm.com>
* remote.c (struct cached_reg): Change data into a pointer.
* (stop_reply_dtr): Free data pointers before deleting vector.
(process_stop_reply): Likewise.
(remote_parse_stop_reply): Allocate space for data
gdb/ChangeLog:
2017-01-16 Ivo Raisr <ivo.raisr@oracle.com>
Split real and pseudo registers.
* sparc-tdep.h (SPARC_CORE_REGISTERS): New macro.
(sparc32_pseudo_regnum): New enum.
* sparc64-tdep.h (sparc64_pseudo_regnum): New enum.
* sparc-tdep.c (SPARC32_FPU_REGISTERS): New macro.
(SPARC32_CP0_REGISTERS): New macro.
(sparc32_pseudo_register_name): New function.
(sparc32_register_name): Use sparc32_pseudo_register_name.
(sparc32_pseudo_register_type): New function.
(sparc32_register_type): Use sparc32_pseudo_register_type.
(sparc32_pseudo_register_read, sparc32_pseudo_register_write): Handle
pseudo register numbers.
* sparc64-tdep.c SPARC64_FPU_REGISTERS): New macro.
(SPARC64_CP0_REGISTERS): New macro.
(sparc64_pseudo_register_name): New function.
(sparc64_register_name): Use sparc64_pseudo_register_name.
(sparc64_pseudo_register_type): New function.
(sparc64_register_type): Use sparc64_pseudo_register_type.
(sparc64_pseudo_register_read, sparc64_pseudo_register_write): Handle
pseudo register numbers.
(sparc64_store_floating_fields, sparc64_extract_floating_fields,
sparc64_store_arguments): Handle pseudo register numbers.
If we turn "remote debug" on and GDB does some vFile operations,
a lot of things will be printed in the screen, which makes
"remote debug" useless.
This patch changes the code that we only print 512 chars in max in
debugging messages, like this,
Sending packet: $qXfer:features:read:target.xml:0,fff#7d...Packet received: l<?xml version="1.0"?>\n<!-- Copyright (C) 2010-2016 Free Software Foundation, Inc.\n\n Copying and distribution of this file, with or without modification,\n are permitted in any medium without royalty provided the copyright\n notice and this notice are preserved. -->\n\n<!-- AMD64 with AVX - Includes Linux-only special "register". -->\n\n<!DOCTYPE target SYSTEM "gdb-target.dtd">\n<target>\n <architecture>i386:x86-64</architecture>\n <osabi>GNU/Linux</osabi>\n <xi:include href="64bit-core.xml"/>\n <xi:[14 bytes omitted]
Sending packet: $qXfer:auxv:read::0,1000#6b...Packet received: l!\000\000\000\000\000\000\000\000d\000\000\000\000\000\000\000\003\000\000\000\000\000\000\000@\000@\000\000\000\000\000\004\000\000\000\000\000\000\0008\000\000\000\000\000\000\000\005\000\000\000\000\000\000\000\t\000\000\000\000\000\000\000\a\000\000\000\000\000\000\000\177\000\000\b\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\t\000\000\000\000\000\000\000\000\004@\000\000\000\000\000\013\000\000\000\000\000\000\003\000\000\000\000\000\000\f\000\000\000\000\000\000\003\000\000\000\000\000\000\r\000\000\000\000\000\000\003\000\000\000\000\000\000\016\000\000\000\000\000\000\003\000\000\000\000\000\000\027\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\031\000\000\000\000\000\000\177\000\000\037\000\000\000\000\000\000\000\000\017\000\000\000\000\000\000\00\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000[582 bytes omitted]
gdb:
2017-01-13 Yao Qi <yao.qi@linaro.org>
* remote.c (REMOTE_DEBUG_MAX_CHAR): New macro.
(putpkt_binary): Print only REMOTE_DEBUG_MAX_CHAR chars in debug
output.
(getpkt_or_notif_sane_1): Likewise.
If I run 'make check-headers', I get these errors,
....
In file included from ../../binutils-gdb/gdb/common/common-defs.h:78:0,
from ../../binutils-gdb/gdb/defs.h:28,
from <command-line>:0:
../../binutils-gdb/gdb/common/common-utils.h:23:18: fatal error: string: No such file or directory
#include <string>
^
because we still parse headers as c file with a c compiler, which is no
longer true after we moved to C++. This patch changes it to use C++
compiler and parse headers as c++ headers.
gdb:
2017-01-13 Yao Qi <yao.qi@linaro.org>
* Makefile.in (checker-headers): Use CXX and CXX_DIALET instead
of CC. Pass "-x c++-header" instead of "-x c".
I find this comment counter intuitive, and it probably predates the
always-target-async change. AFAIK, remote will always be async, unless
the user explicitly prevents it with "maint set target-async off".
gdb/ChangeLog:
* remote.c (remote_can_async_p): Update comment.
I think this comment is outdated. Nowadays, linux-nat is always async,
unless the user has explictly turned it off with
"maint set target-async off".
gdb/ChangeLog:
* linux-nat.c (linux_nat_can_async_p): Update comment.
By inspecting the serial_add_interface calls, I found that the serial
interface names that we have today are:
- hardwire
- terminal
- pipe
- tcp
- event
The calls to serial_interface_lookup with any other names are most
likely leftovers which can be removed since these serial interfaces
don't exist anymore. The commits that removed the "pc" and "parallel"
interfaces are respectively:
cb2a4ac5da
and
e386d4d2fb
gdb/ChangeLog:
* serial.c (serial_open): Forget about "pc" and "lpt" serial interface.
This adds a constructor and destructor to demangle_parse_info, and
then changes all the users to use them. This removes
make_cleanup_cp_demangled_name_parse_free and its single use.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-type.c (typy_legacy_template_argument): Update.
* cp-support.h (struct demangle_parse_info) (demangle_parse_info,
~demangle_parse_info): Declare new members.
(cp_demangled_name_to_comp): Return unique_ptr.
(cp_demangled_name_parse_free)
(make_cleanup_cp_demangled_name_parse_free)
(cp_new_demangle_parse_info): Remove.
* cp-support.c (do_demangled_name_parse_free_cleanup)
(make_cleanup_cp_demangled_name_parse_free): Remove.
(inspect_type, cp_canonicalize_string_full)
(cp_canonicalize_string): Update.
(mangled_name_to_comp): Change return type.
(cp_class_name_from_physname, method_name_from_physname)
(cp_func_name, cp_remove_params): Update.
* cp-name-parser.y (demangle_parse_info): New constructor, from
cp_new_demangle_parse_info.
(~demangle_parse_info): New destructor, from
cp_demangled_name_parse_free.
(cp_merge_demangle_parse_infos): Update.
(cp_demangled_name_to_comp): Change return type.
This replaces a cleanup in execute_gdb_command with an instance of
std::string.
Testing showed that this originally missed a cleanup that was returned
by prevent_dont_repeat. This version of the patch changes
prevent_dont_repeat to return a scoped_restore rather than a cleanup.
2017-01-10 Tom Tromey <tom@tromey.com>
* top.c (prevent_dont_repeat): Change return type.
* python/python.c (execute_gdb_command): Use std::string.
Update.
* guile/guile.c (gdbscm_execute_gdb_command): Update.
* command.h (prevent_dont_repeat): Change return type.
* breakpoint.c (bpstat_do_actions_1): Update.
This changes dwarf2_evaluate_loc_desc_full to use scoped_value_mark.
Note that this function previously called do_cleanup using the same
cleanup multiple times. I had thought this was buggy, but re-reading
make_my_cleanup2 indicates that it is not. Nevertheless it is
surprising, and at least one of the calls (the one that is completely
removed in this patch) seems to have been done under the assumption
that it would still have some effect.
2017-01-10 Tom Tromey <tom@tromey.com>
* value.h (scoped_value_mark::~scoped_value_mark): Call
free_to_mark.
(scoped_value_mark::free_to_mark): New method.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use
scoped_value_mark.
This adds a scoped_value_mark class, that records the value mark in
the constructor and then calls value_free_to_mark in the destructor.
It then updates various spots in gdb to use this class, rather than a
cleanup.
It would be better overall to replace "struct value *" with a
shared_ptr, maybe eliminating the need for this class (watchpoints
would perhaps need some new mechanism as well). However, that's
difficult to do.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-value.c (valpy_dereference, valpy_referenced_value)
(valpy_reference_value, valpy_const_value, valpy_get_address)
(valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast)
(valpy_getitem, valpy_call, valpy_binop_throw, valpy_negative)
(valpy_absolute, valpy_richcompare_throw): Use scoped_value_mark.
* dwarf2loc.c (dwarf2_loc_desc_get_symbol_read_needs): Use
scoped_value_mark.
* dwarf2-frame.c (execute_stack_op): Use scoped_value_mark.
* value.h (scoped_value_mark): New class.
This removes make_cleanup_discard_psymtabs in favor of a new class.
2017-01-10 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_build_psymtabs): Use psymtab_discarder.
* psympriv.h (make_cleanup_discard_psymtabs): Don't declare.
* psymtab.c (discard_psymtabs_upto): Remove.
(make_cleanup_discard_psymtabs): Remove.
(struct psymtab_state): Remove.
This introduces a new class, gdb::unlinker, that unlinks a file in the
destructor. The user of this class has the option to preserve the
file instead, by calling the "keep" method.
This patch then changes the spots in gdb that use unlink in a cleanup
to use this class instead. In one spot I went ahead and removed all
the cleanups from the function.
This fixes one latent bug -- do_bfd_delete_cleanup could refer to
freed memory, by decref'ing the BFD before using its filename.
2017-01-10 Tom Tromey <tom@tromey.com>
* record-full.c (record_full_save_cleanups): Remove.
(record_full_save): Use gdb::unlinker.
* gcore.c (do_bfd_delete_cleanup): Remove.
(gcore_command): Use gdb::unlinker, unique_xmalloc_ptr. Remove
cleanups.
* dwarf2read.c (unlink_if_set): Remove.
(write_psymtabs_to_index): Use gdb::unlinker.
* common/gdb_unlinker.h: New file.
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
This adds a new gdb_ref_ptr.h, that implements a reference-counting
smart pointer class, where the user of the class supplies a
reference-counting policy object.
This class will be used in the next patch, which changes most explicit
BFD reference counts to use this new type. Meanwhile, this patch
changes gdbpy_ref to be a specialization of this new class.
This change required adding new nullptr_t overloads some operators in
gdb_ref_ptr.h. I suspect this was needed because some Python header
redefines NULL, but I'm not certain.
2017-01-10 Tom Tromey <tom@tromey.com>
* common/gdb_ref_ptr.h: New file.
* python/py-ref.h (struct gdbpy_ref_policy): New.
(gdbpy_ref): Now a typedef.
This removes make_cleanup_htab_delete in favor of destructors,
building on an earlier patch that added the htab_up typedef.
Testing revealed that more cleanup-removal work was needed in
dwarf2loc.c, so this version of the patch changes code there to use
unordered_set and vector, removing some more cleanups.
2017-01-10 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_htab_delete): Don't declare.
* utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete):
Remove.
* linespec.c (decode_compound_collector): Add constructor,
destructor.
(lookup_prefix_sym): Remove cleanup.
(symtab_collector): Add constructor, destructor.
(collect_symtabs_from_filename): Remove cleanup.
* disasm.c (do_mixed_source_and_assembly): Use htab_up.
* compile/compile-c-symbols.c (generate_c_for_variable_locations):
Use htab_up.
* gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up.
* dwarf2read.c (dw2_expand_symtabs_matching)
(dw2_map_symbol_filenames, dwarf_decode_macros)
(write_psymtabs_to_index): Use htab_up.
* dwarf2loc.c (func_verify_no_selftailcall)
(call_site_find_chain_1, func_verify_no_selftailcall)
(chain_candidate, call_site_find_chain_1): Use std::unordered_set,
std::vector, gdb::unique_xmalloc_ptr.
(call_sitep): Remove typedef.
(dwarf2_locexpr_baton_eval): Remove unused variable.
make_cleanup_py_decref and make_cleanup_py_xdecref are now unused, so
this patch removes themm. Future Python changes should use gdbpy_ref
instead.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python-internal.h (make_cleanup_py_decref)
(make_cleanup_py_xdecref): Don't declare.
* python/py-utils.c (py_decref, make_cleanup_py_decref)
(py_xdecref, make_cleanup_py_xdecref): Remove.
This changes some spots in py-framefilter.c to use gdbpy_ref rather
than make_cleanup_py_decref or make_cleanup_py_xdecref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_mi_print_variables): Use gdbpy_ref.
(py_print_locals, enumerate_locals, py_print_args): Use gdbpy_ref.
This changes enumerate_args to use gdbpy_ref, and gets rid of many
gotos.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (enumerate_args): Use gdbpy_ref.
This changes more places in py-utils.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-utils.c (unicode_to_encoded_string)
(python_string_to_target_string)
(python_string_to_target_python_string)
(python_string_to_host_string, gdbpy_obj_to_string)
(get_addr_from_python): Use gdbpy_ref.
This changes pyuw_object_attribute_to_pointer to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-unwind.c (pyuw_object_attribute_to_pointer): Use
gdbpy_ref.
This changes more places in python.c to use gdbpy_ref.
Additionally, previously gdbpy_apply_type_printers would return
EXT_LANG_RC_ERROR if a type printer returned None. However, that
doesn't seem correct to me; this patch changes it to return
EXT_LANG_RC_NOP in this case.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (eval_python_command, gdbpy_decode_line)
(gdbpy_run_events, gdbpy_start_type_printers)
(gdbpy_apply_type_printers): Use gdbpy_ref.
This changes py-param.c to use gdbpy_ref in a couple more spots.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-param.c (get_doc_string, compute_enum_values): Use
gdbpy_ref.
This changes py-inferior.c to use gdbpy_ref in more places.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-inferior.c (find_thread_object, build_inferior_list):
Use gdbpy_ref.
This changes py_print_frame to use gdbpy_ref in more places.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Use gdbpy_ref.
This changes bpfinishpy_out_of_scope to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-finishbreakpoint.c (bpfinishpy_out_of_scope): Use
gdbpy_ref.
This changes py-cmd.c to use gdbpy_ref in more places. This also
fixes a latent memory leak in cmdpy_completer_helper, which
unnecessarily increfs the result of PyObject_CallMethodObjArgs. This
is not needed because that function returns a new reference.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_completer_helper): Use gdbpy_ref. Remove
extra incref.
(cmdpy_completer_handle_brkchars, cmdpy_completer, cmdpy_init):
Use gdbpy_ref.
This changes gdbpy_breakpoint_cond_says_stop to use gdbpy_ref rather
than explicit reference management.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
gdbpy_ref.
This changes archpy_disassemble to use gdbpy_ref. It also fixes a
latent bug where archpy_disassemble was decref'ing the results of a
all to PyArg_ParseTupleAndKeywords. This is incorrect because
PyArg_ParseTupleAndKeywords returns borrowed references.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-arch.c (archpy_disassemble): Use gdbpy_ref. Don't
decref results of PyArg_ParseTupleAndKeywords.
This changes python_run_simple_file to use gdbpy_ref and
unique_xmalloc_ptr. Thi fixes a latent bug in this function, where
the error path previously ran the cleanups and then referred to one of
the objects just freed.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (python_run_simple_file): Use
unique_xmalloc_ptr, gdbpy_ref.
This changes some spots in py-prettyprint.c to use gdbpy_ref. It also
changes push_dummy_python_frame to be a class, rather than having it
create a cleanup.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (print_stack_unless_memory_error)
(print_string_repr, print_children): Use gdbpy_ref.
(dummy_python_frame): New class.
(dummy_python_frame::dummy_python_frame): Rename from
push_dummy_python_frame.
(py_restore_tstate): Remove.
This changes py_print_frame to use gdbpy_ref in a few spots.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Use gdbpy_ref.
All of gdb has been converted away from ensure_python_env and
varobj_ensure_python_env now; so remove them.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (ensure_python_env, restore_python_env):
Remove.
* python/python-internal.h (ensure_python_env): Don't declare.
* varobj.h (varobj_ensure_python_env): Don't declare.
* varobj.c (varobj_ensure_python_env): Remove.
This changes the last function in varobj.c to use gdbpy_enter_varobj.
2017-01-10 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_value_get_print_value): Use
gdbpy_enter_varobj.
This changes gdbpy_extract_lazy_string's "encoding" argument to be a
unique_xmalloc_ptr. I chose this rather than std::string because it
can sometimes be NULL.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (print_string_repr, print_children):
Update.
* python/py-lazy-string.c (gdbpy_extract_lazy_string): Change type
of "encoding".
* varobj.c (varobj_value_get_print_value): Update.
* python/python-internal.h (gdbpy_extract_lazy_string): Update.
This converts most of the remaining functions in varobj.c to use
gdbpy_enter_varobj.
2017-01-10 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_get_display_hint)
(dynamic_varobj_has_child_method, install_new_value_visualizer)
(varobj_set_visualizer, free_variable): Use
gdbpy_enter_varobj.
This changes the last functions in python.c to use gdbpy_enter. I
split gdbpy_finish_initialization into two functions in order to avoid
some "goto"s.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (python_command): Use gdbpy_enter, gdbpy_ref.
(do_finish_initialization): New function. Use gdbpy_ref.
(gdbpy_finish_initialization): Use gdbpy_enter. Call
do_finish_initialization.
This converts the remaining functions in py-param.c to use
gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-param.c (get_set_value, get_show_value): Use
gdbpy_enter, gdbpy_ref.
This changes fnpy_call to use gdbpy_enter and gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-function.c (fnpy_call): Use gdbpy_enter, gdbpy_ref.
This changes cmdpy_function to use gdbpy_enter and gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_function): Use gdbpy_enter, gdbpy_ref.
This converts the remaining functions in py-varobj.c to use
gdbpy_enter_varobj.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-varobj.c (py_varobj_iter_dtor, py_varobj_iter_next):
Use gdbpy_enter_varobj.
This introduces gdbpy_enter_varobj, a subclass of gdbpy_enter; then
changes one function in py-varobj.c to use it. gdbpy_enter_varobj
takes a varobj as an argument, similar to varobj_ensure_python_env.
2017-01-10 Tom Tromey <tom@tromey.com>
* varobj.c (gdbpy_enter_varobj): New constructor.
* python/python-internal.h (gdbpy_enter_varobj): New class.
* python/py-varobj.c (py_varobj_get_iterator): Use
gdbpy_enter_varobj.
This changes the remaining functions in py-xmethod.c to use
gdbpy_enter; using gdbpy_ref and unique_xmalloc_ptr as
appropriate.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (gdbpy_get_xmethod_result_type): Use
gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr.
(gdbpy_invoke_xmethod): Use gdbpy_ref, gdbpy_enter.
(gdbpy_get_xmethod_arg_types): Use gdbpy_ref,
unique_xmalloc_ptr.
(gdbpy_get_xmethod_arg_types): Use gdbpy_ref, gdbpy_enter.
Change invoke_match_method to use gdbpy_ref.
I neglected to convert this function in my earlier series.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (invoke_match_method): Use
gdbpy_ref.
Change gdbpy_get_matching_xmethod_workers to use gdbpy_enter and
gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): use
gdbpy_enter, gdbpy_ref.
This changes python_interactive_command to use gdbpy_enter.
Previously this function was leaving a dangling cleanup -- this is
sort of ok in a command function, but IMO it's still better to clean
up.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (python_interactive_command): Use gdbpy_enter.
Change gdbpy_before_prompt_hook to use gdbpy_enter and gdbpy_ref.
This also rearranges the function a tiny bit to make it more clear.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_before_prompt_hook): Use gdbpy_enter,
gdbpy_ref.
Change py-prettyprint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Use
gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr.
This introduces a new "htab_up" typedef, which is a std::unique_ptr
that can call htab_delete. Then it changes some code in
py-framefilter.c to use both gdbpy_enter and the new htab_up.
2017-01-10 Tom Tromey <tom@tromey.com>
* utils.h (htab_deleter): New struct.
(htab_up): New typedef.
* python/py-framefilter.c (gdbpy_apply_frame_filter): Use
gdbpy_enter, gdbpy_ref, htab_up.
Change py-unwind.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-unwind.c (pending_frame_invalidate): Remove.
(pyuw_sniffer): Use gdbpy_enter and gdbpy_ref.
Change the simple parts of py-xmethods.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (gdbpy_free_xmethod_worker_data)
(gdbpy_clone_xmethod_worker_data): Use gdbpy_enter.
Change the simple parts of python.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_eval_from_control_command)
(gdbpy_source_script, gdbpy_run_events)
(gdbpy_source_objfile_script, gdbpy_execute_objfile_script)
(gdbpy_free_type_printers, gdbpy_finish_initialization): Use
gdbpy_enter.
Change py-finishbreakpoint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-finishbreakpoint.c (bpfinishpy_handle_stop)
(bpfinishpy_handle_exit): Use gdbpy_enter.
Change py-cmd.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_destroyer)
(cmdpy_completer_handle_brkchars, cmdpy_completer): Use
gdbpy_enter.
Change py-breakpoint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
gdbpy_enter.
(gdbpy_breakpoint_has_cond): Likewise.
This introduces gdbpy_enter, a class that can be used to acquire and
release the Python GIL, and also set other Python-related globals used
by gdb. ensure_python_env is rewritten in terms of this new class.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_enter): New constructor.
(~gdbpy_enter): New destructor.
(restore_python_env, ensure_python_env): Rewrite.
* python/python-internal.h (gdbpy_enter): New class.
This changes a few functions in py-value.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-value.c (value_has_field, get_field_flag)
(get_field_type, valpy_getitem, convert_value_from_python): Use
gdbpy_ref.
This changes a couple of functions in python.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_progspaces, gdbpy_objfiles): Use
gdbpy_ref.
This changes several functions in py-prettyprint.c to use
gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (search_pp_list)
(find_pretty_printer_from_objfiles)
(find_pretty_printer_from_progspace)
(find_pretty_printer_from_gdb, find_pretty_printer)
(gdbpy_get_display_hint, gdbpy_get_varobj_pretty_printer): Use
gdbpy_ref.
This changes some code in py-linetable.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-linetable.c (build_line_table_tuple_from_pcs)
(ltpy_get_all_source_lines): Use gdbpy_ref.
This changes some code in py-framefilter.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (extract_sym, extract_value)
(get_py_iter_from_func, bootstrap_python_frame_filters): Use
gdbpy_ref.
This changes some code in py-function.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-function.c (convert_values_to_python, fnpy_init): Use
gdbpy_ref.
This changes py-type.c to use gdbpy_ref.
This results in simpler logic and the removal of "goto"s.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-type.c (convert_field, make_fielditem, typy_fields)
(typy_range): Use gdbpy_ref.
This changes the event code in the Python layer to use
gdbpy_ref, simplifying the logic in many places.
It also changes evpy_emit_event not to steal a reference to its
argument. This is simpler to do now that gdbpy_ref is in use;
it's also a reasonable cleanup in its own right. While doing this I
realized that evpy_emit_event should not be calling gdbpy_print_stack
(all the outermost callers do this if needed), so I removed this as
well.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-threadevent.c (create_thread_event_object): Use
gdbpy_ref.
* python/py-stopevent.c (create_stop_event_object): Simplify.
(emit_stop_event): Use gdbpy_ref.
* python/py-signalevent.c (create_signal_event_object): Use
gdbpy_ref.
* python/py-newobjfileevent.c (create_new_objfile_event_object)
(emit_new_objfile_event, create_clear_objfiles_event_object)
(emit_clear_objfiles_event): Use gdbpy_ref.
* python/py-infevents.c (create_inferior_call_event_object)
(create_register_changed_event_object)
(create_memory_changed_event_object, emit_inferior_call_event)
(emit_memory_changed_event, emit_register_changed_event): Use
gdbpy_ref.
* python/py-exitedevent.c (create_exited_event_object)
(emit_exited_event): Use gdbpy_ref.
* python/py-event.h (evpy_emit_event): Remove
CPYCHECKER_STEALS_REFERENCE_TO_ARG annotation.
* python/py-event.c (evpy_emit_event): Use gdbpy_ref.
* python/py-continueevent.c (emit_continue_event): Use
gdbpy_ref.
* python/py-breakpoint.c (gdbpy_breakpoint_created)
(gdbpy_breakpoint_deleted, gdbpy_breakpoint_modified): Use
gdbpy_ref.
* python/py-bpevent.c (create_breakpoint_event_object): Use
gdbpy_ref.
This patch introduces class gdbpy_ref, which is a sort of smart
pointer that owns a single Python reference to a PyObject. This class
acts a bit like unique_ptr, but also a bit like shared_ptr (in that
copies do what you might expect); I considered going solely with
unique_ptr but it seemed quite strange to have a unique_ptr that
actually manages a shared resource.
Subsequent patches use this new class to simplify logic in the Python
layer.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-ref.h: New file.
All implementations of redirect/do_redirect in the ui_out subsystem
always return 0 (success). We can therefore clean it up and make them
return void.
gdb/ChangeLog:
* cli-out.c (cli_ui_out::do_redirect): Change return type to
void.
* cli-out.h (cli_ui_out::do_redirect): Likewise.
* mi/mi-out.c (mi_ui_out::do_redirect): Likewise.
* mi/mi-out.h (mi_ui_out::do_redirect): Likewise.
* ui-out.c (ui_out::redirect): Likewise.
* ui-out.h (ui_out::redirect, ui_out::do_redirect): Likewise.
* cli/cli-logging.c (set_logging_redirect): Update call site of
ui_out::redirect.
(handle_redirections): Likewise.
* scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* top.c (execute_command_to_string): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
The help message of the "frame" command states that nothing is printed
if the command is executed from the command file or user-defined
command. My testing leads me to think that this is not true (at least
today).
(gdb) bt
#0 bar (n=17) at test.c:9
#1 0x00000000004006e0 in foo (v=17) at test.c:13
#2 0x00000000004006f0 in main () at test.c:21
(gdb) frame
#0 bar (n=17) at test.c:9
9 baz(n);
(gdb) define foo
Type commands for definition of "foo".
End with a line saying just "end".
>frame 1
>end
(gdb) foo
#1 0x00000000004006e0 in foo (v=17) at test.c:13
13 bar(v);
This patch simply removes that bit from the help message. I didn't find
anything corresponding to this in the documentation that needs to be
fixed.
The behavior change corresponding to this documentation change was done
in commit b00771232f.
gdb/ChangeLog:
* stack.c (_initialize_stack): Update "frame" command help message.
While casting works as expected with expression debugging turned off,
this seems to be an indication that the D language parser function is
doing something wrong in the building of the expression.
Without changing the grammar, using UNOP_CAST_TYPE is the right thing to
do here, as the TypeExp handler has already wrapped the type around a
pair of OP_TYPE opcodes.
gdb/ChangeLog:
* d-exp.y (CastExpression): Emit UNOP_CAST_TYPE.
gdb/testsuite/ChangeLog:
* gdb.dlang/debug-expr.exp: New file.
$ make check-headers CHECK_HEADERS="x86-linux-nat.h"
...
../../binutils-gdb/gdb/x86-linux-nat.h:29:8: error: 'ps_err_e' does not name a type
extern ps_err_e x86_linux_get_thread_area (pid_t pid, void *addr,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* x86-linux-nat.h: Include gdb_proc_service.h.
$ make check-headers CHECK_HEADERS="ser-base.h"
...
../../binutils-gdb/gdb/ser-base.h:33:8: error: 'serial_ttystate' does not name a type
extern serial_ttystate ser_base_get_tty_state (struct serial *scb);
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* ser-base.h: Include serial.h.
$ make check-headers CHECK_HEADERS="ppc-linux-tdep.h"
...
../../binutils-gdb/gdb/ppc-linux-tdep.h:34:24: error: 'PPC_NUM_REGS' was not declared in this scope
PPC_ORIG_R3_REGNUM = PPC_NUM_REGS,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* ppc-linux-tdep.h: Include ppc-tdep.h.
$ make check-headers CHECK_HEADERS="nat/amd64-linux-siginfo.h"
....
../../binutils-gdb/gdb/nat/amd64-linux-siginfo.h:52:39: error: 'siginfo_t' was not declared in this scope
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* nat/amd64-linux-siginfo.h: Include signal.h.
$ make check-headers CHECK_HEADERS="nat/aarch64-linux-hw-point.h"
...
../../binutils-gdb/gdb/nat/aarch64-linux-hw-point.h:169:37: error: use of enum 'target_hw_bp_type' without previous declaration
int aarch64_handle_breakpoint (enum target_hw_bp_type type, CORE_ADDR addr,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* nat/aarch64-linux-hw-point.h: Include break-common.h.
$ make check-headers CHECK_HEADERS="mi/mi-parse.h"
...
../../binutils-gdb/gdb/mi/mi-parse.h:77:6: error: use of enum 'print_values' without previous declaration
enum print_values mi_parse_print_values (const char *name);
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* mi/mi-parse.h: Include mi-cmds.h.
$ make check-headers CHECK_HEADERS="target.h inf-loop.h"
...
../../binutils-gdb/gdb/inf-loop.h:23:42: error: use of enum 'inferior_event_type' without previous declaration
extern void inferior_event_handler (enum inferior_event_type event_type,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* inf-loop.c: Don't include "target.h".
* inf-loop.h: Include it here.
$ make check-headers CHECK_HEADERS="dfp.h"
...
../../binutils-gdb/gdb/dfp.h:39:8: error: 'DOUBLEST' does not name a type
extern DOUBLEST decimal_to_doublest (const gdb_byte *from, int len,
^
../../binutils-gdb/gdb/dfp.h:41:33: error: use of enum 'exp_opcode' without previous declaration
extern void decimal_binop (enum exp_opcode,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* dfp.h: Include "dboulest.h" and "expression.h".
$ make check-headers CHECK_HEADERS="ax-gdb.h"
...
../../binutils-gdb/gdb/ax-gdb.h:104:8: error: 'agent_expr_up' does not name a type
extern agent_expr_up gen_trace_for_expr (CORE_ADDR, struct expression *,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* ax-gdb.h: Include "ax.h"
Commit e379037 (Move gdb_ptrace.h to nat/), so we should update
file name in HFILES_NO_SRCDIR too. Otherwise, 'make tags' complains,
$ make tags
make: *** No rule to make target `gdb_ptrace.h', needed by `TAGS'. Stop.
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Replace gdb_ptrace.h
with nat/gdb_ptrace.h.
This patch splits the expression before the && operator instead of
after it.
gdb:
2017-01-05 Yao Qi <yao.qi@linaro.org>
* mips-fbsd-tdep.c (mips_fbsd_sigframe_init): Move && to
new line.
(mips64_fbsd_sigframe_init): Likewise.
This has been tested for the n64 and o32 ABIs. Signal frame unwinders for
both ABIs are provided. FreeBSD/mips requires custom linkmap offsets since
it contains an additional l_off member in 'struct link_map' that other
FreeBSD platforms do not have. Support for collecting and supplying
general purpose and floating point register sets are provided. Common
routines for working with native format register sets are exported for
use by the native target.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add mips-fbsd-tdep.o.
(ALLDEPFILES): Add mips-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/mips target.
* configure.tgt: Add mips*-*-freebsd*.
* mips-fbsd-tdep.c: New file.
* mips-fbsd-tdep.h: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Contributors): Add SRI International and University
of Cambridge for FreeBSD/mips.
In ee40d8d (Move computed value's frame id to piece_closure), I only
updated read_pieced_value to use frame_id from piece_closure, but
forgot to update write_pieced_value, so it causes the following
internal error on arm-linux,
set variable l = 4^M
gdb/git/gdb/value.c:1579: internal-error: frame_id* deprecated_value_next_frame_id_hack(value*): Assertion `value->lval == lval_register' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.base/store.exp: var longest l; setting l to 4 (GDB internal error)
This patch fixes the internal error.
gdb:
2017-01-04 Yao Qi <yao.qi@linaro.org>
* dwarf2loc.c (write_pieced_value): Don't use VALUE_FRAME_ID (to),
use c->frame_id when the piece location is DWARF_VALUE_REGISTER.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This patch rotates the GDB main ChangeLog file as per our "Start
of New Year Procedure".
2017-01-01 Joel Brobecker <brobecker@adacore.com>
* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2016.
Nowadays, GDB propagates C++ exceptions across readline using
setjmp/longjmp 89525768cd ("Propagate GDB/C++ exceptions across
readline using sj/lj-based TRY/CATCH") because DWARF-based unwinding
can't cross C functions compiled without -fexceptions (see details
from the commit above).
Unfortunately, toolchains that use SjLj-based C++ exceptions got
broken with that fix, because _Unwind_SjLj_Unregister, which is put at
the exit of a function, is not executed due to the longjmp added by
that commit.
(gdb) [New Thread 2936.0xb80]
kill
Thread 1 received signal SIGSEGV, Segmentation fault.
0x03ff662b in ?? ()
top?bt 15
#0 0x03ff662b in ?? ()
#1 0x00526b92 in stdin_event_handler (error=0, client_data=0x172ed8)
at ../../binutils-gdb/gdb/event-top.c:555
#2 0x00525a94 in handle_file_event (ready_mask=<optimized out>,
file_ptr=0x3ff5cb8) at ../../binutils-gdb/gdb/event-loop.c:733
#3 gdb_wait_for_event (block=block@entry=1)
at ../../binutils-gdb/gdb/event-loop.c:884
#4 0x00525bfb in gdb_do_one_event ()
at ../../binutils-gdb/gdb/event-loop.c:347
#5 0x00525ce5 in start_event_loop ()
at ../../binutils-gdb/gdb/event-loop.c:371
#6 0x0051fada in captured_command_loop (data=0x0)
at ../../binutils-gdb/gdb/main.c:324
#7 0x0051cf5d in catch_errors (
func=func@entry=0x51fab0 <captured_command_loop(void*)>,
func_args=func_args@entry=0x0,
errstring=errstring@entry=0x7922bf <VEC_interp_factory_p_quick_push(VEC_inte rp_factory_p*, interp_factory*, char const*, unsigned int)::__PRETTY_FUNCTION__+351> "", mask=mask@entry=RETURN_MASK_ALL)
at ../../binutils-gdb/gdb/exceptions.c:236
#8 0x00520f0c in captured_main (data=0x328feb4)
at ../../binutils-gdb/gdb/main.c:1149
#9 gdb_main (args=args@entry=0x328feb4) at ../../binutils-gdb/gdb/main.c:1159
#10 0x0071e400 in main (argc=1, argv=0x171220)
at ../../binutils-gdb/gdb/gdb.c:32
Fix this by making the functions involved in setjmp/longjmp as
noexcept, so that the compiler knows it doesn't need to emit the
_Unwind_SjLj_Register / _Unwind_SjLj_Unregister calls for C++
exceptions.
Tested on x86_64 Fedora 23 with:
- GCC 5.3.1 w/ DWARF-based exceptions.
- GCC 7 built with --enable-sjlj-exceptions.
gdb/ChangeLog:
2016-12-20 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
PR gdb/20977
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept): New
noexcept function, factored out from ...
(gdb_rl_callback_read_char_wrapper): ... this.
(gdb_rl_callback_handler): Mark noexcept.
Since GDB has switched to C++ but the file names are still .c emacs does
not load the proper mode when opening files in the gdb directory.
This patch fixes that by enabling c++ mode.
This patch also fixes indentation tweaks as discussed in this thread:
https://sourceware.org/ml/gdb-patches/2016-12/msg00074.html
Indent with gdb-code-style.el included and the .dir-locals.el is as such:
namespace TestNameSpace {
class test
{
public:
test test() {}
int m_a;
};
struct teststruct
{
int a;
}
}
gdb/ChangeLog:
* .dir-locals.el: Set c++ mode for the directory and set indent
properly.
* gdb-code-style.el: Set c-set-offset 'innamespace as a safe value
to be used in .dir-locals.el.
Due to changes introduced by
commit 4d01a485d2
('struct expression *' -> gdb::unique_xmalloc_ptr<expression>)
compilation is broken on Darwin.
../gdb/darwin-nat-info.c:733:8: error: assigning to 'struct expression *'
from incompatible type
'expression_up' (aka 'std::__1::unique_ptr<expression, gdb::xfree_deleter<expression> >')
expr = parse_expression (exp);
Beside compilation, memory leak was solved as 'make_clean_up' was not called in previous
version.
2016-12-16 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Changelog:
* darwin-nat-info.c (info_mach_region_command): Use expression_up.
cris_delayed_get_disassembler has an assert that exec_bfd can't be
NULL, but this assert can be triggered like this,
(gdb) set architecture cris
The target architecture is assumed to be cris
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000:
../../binutils-gdb/gdb/cris-tdep.c:3798: internal-error: int cris_delayed_get_disassembler(bfd_vma, disassemble_info*): Assertion `exec_bfd != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
however, cris_get_disassembler does have code to handle the case that
bfd is NULL,
/* If there's no bfd in sight, we return what is valid as input in all
contexts if fed back to the assembler: disassembly *with* register
prefix. Unfortunately this will be totally wrong for v32. */
if (abfd == NULL)
return print_insn_cris_with_register_prefix;
This patch is to remove this assert.
gdb:
2016-12-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20955
* cris-tdep.c (cris_delayed_get_disassembler): Remove the
assert.
This patch change aarch prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved when
the program is compiled without debug information.
Original Patched Original Patched
without dbg without dbg with dbg with dbg
/ 11.1635239124 9.99472999573 9.65339517593 9.66648793221
-fstack-protector-all 11.2560930252 9.338118 9.63896489143 9.59474396706
gdb:
2016-12-9 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (instruction_reader::read): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
This patch change arm prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved a lot,
Original Patched Original Patched
without dbg without dbg with dbg with dbg
-marm 14.166741848 9.32852292061 11.4908499718 9.16302204132
-marm 14.6705040932 9.34849786758 18.2788009644 9.14823913574
\-fstack-protector-all
-mthumb 34.4391930103 10.6062178612 13.7886838913 10.3094120026
-mthumb
\-fstack-protector-all 34.9310460091 10.6413481236 25.3875930309 10.6294929981
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (skip_prologue_function): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
(thumb_analyze_prologue): Likewise.
(arm_analyze_load_stack_chk_guard): Likewise.
(arm_skip_stack_protector): Likewise.
(arm_analyze_prologue):Likewise.
(extend_buffer_earlier): Call target_read_code instead
of target_read_memory.
(arm_adjust_breakpoint_address): Likewise.
For "info threads", we currently run into:
$ gdb/gdb -q -nw -nx --batch -ex start -ex info\ threads bfd/doc/chew
Temporary breakpoint 1 at 0x80486e0: file ../../../W._C._Handy/bfd/doc/chew.c, line 1535.
[New Thread 10656.5]
Thread 4 hit Temporary breakpoint 1, main (ac=1, av=0x102cd84) at ../../../W._C._Handy/bfd/doc/chew.c:1535
1535 {
Id Target Id Frame
1 bogus thread id 1 Can't fetch registers from thread bogus thread id 1: No such thread
Before commit e8032dde10,
gdb/thread.c:update_thread_list used to call prune_threads, after that change
it doesn't anymore, and we don't implement the to_update_thread_list target
method where the prune_threads call got moved. For now, apply a fix, related
to commit c82f56d9d7 "Hurd: Adjust to
startup-with-shell changes", which restores the previous behavior:
Id Target Id Frame
* 4 Thread 10688.4 main (ac=1, av=0x102cd84) at ../../../W._C._Handy/bfd/doc/chew.c:1535
5 Thread 10688.5 0x0106096c in ?? () from /lib/i386-gnu/libc.so.0.3
Not perfect, but at least better.
gdb/
* gnu-nat.c (gnu_create_inferior): After startup_inferior, call
prune_threads.
Follow-up to commit 14f6890677.
global_thread_id_to_ptid expects global thread numbers, which are nowadays only
used in MI, never presented to the user in the CLI. Since this is a CLI
command, it should accept the inferior-qualified format instead.
gdb/
* gnu-nat.c (set_sig_thread_cmd): Use parse_thread_id instead of
global_thread_id_to_ptid.
..., so handle these in "C" mode still:
gdb/
* config/i386/i386gnu.mh (%_S.o %_U.o): Add "-x c" to
"COMPILE.post".
* gnu-nat.c: #include Mach/Hurd headers before all others. Wrap
Mach/Hurd headers and MIG stubs' prototypes in 'extern "C"'.
* i386-gnu-nat.c: Likewise.
GNU/Hurd uses its own "typedef enum __error_t_codes error_t;"
([glibc]/sysdeps/mach/hurd/bits/errno.h), contrary to the default
"typedef int error_t;" ([glibc]/stdlib/errno.h).
The Mach/Hurd RPCs return kern_return_t values, for which, upon assigning them
to an error_t variable, GCC in C++ mode tells us "error: invalid conversion
from 'kern_return_t {aka int}' to 'error_t {aka __error_t_codes}'". Instead of
casting all these RPC return values to "error_t", just use "kern_return_t"
variables:
gdb/
* gnu-nat.c (proc_get_exception_port, proc_set_exception_port)
(INF_RESUME_MSGPORT_RPC, proc_get_state, _proc_get_exc_port)
(proc_steal_exc_port, proc_restore_exc_port, make_proc)
(inf_startup, inf_set_pid, inf_validate_procinfo)
(inf_validate_task_sc, inf_set_traced, inf_validate_procs)
(inf_signal, inf_continue, gnu_wait, S_exception_raise_request)
(do_mach_notify_dead_name, S_proc_wait_reply)
(S_msg_sig_post_untraced_reply, S_msg_sig_post_reply)
(port_msgs_queued, gnu_read_inferior, gnu_write_inferior)
(gnu_find_memory_regions, steal_exc_port, thread_takeover_sc_cmd)
(flush_inferior_icache): Instead of "error_t" use "kern_return_t".
* i386-gnu-nat.c (fetch_fpregs, store_fpregs, i386_gnu_dr_get)
(i386_gnu_dr_set): Likewise.
... by a bit of code refactoring:
gdb/
* gnu-nat.c (set_task_pause_cmd, set_signals_cmd)
(set_exceptions_cmd): Add variants taking an "int arg" instead of
a "char *". Make the "char *" variants use the former.
(set_noninvasive_cmd): Also use the "int arg" variants.