(_initialize_values): Mention convenience functions in the help text
for "show convenience".
doc/
* gdb.texinfo (Convenience Vars): Update text for "show convenience"
to include functions.
testsuite/
* gdb.base/default.exp: Update expected output of "show convenience".
(Sized_relobj_file::find_special_sections): New function.
* object.cc (Sized_relobj_file::find_shdr): New function.
(Sized_relobj_file::find_eh_frame): Use find_shdr.
(Sized_relobj_file::find_special_sections): New function, split out..
(Sized_relobj_file::do_read_symbols): ..from here.
* output.h (Output_data_got::replace_constant): New function.
(Output_data_got::num_entries): New function.
(Output_data_got::last_got_offset,set_got_size): Use num_entries.
(Output_data_got::got_offset): Protected rather than private.
(Output_data_got::replace_got_entry): New function.
* output.cc (Output_data_got::replace_got_entry): New function.
* powerpc.cc (class Powerpc_relobj): New.
(class Powerpc_relocate_functions): Delete all psymval variants or
convert to value,addend type. Delete pcrela, pcrela_unaligned.
Implement _ha functions using corresponding _hi function.
(Powerpc_relobj::find_special_sections): New function.
(Target_powerpc::do_make_elf_object): New function.
(class Output_data_got_powerpc): New.
(class Output_data_glink): New.
(class Powerpc_scan_relocatable_reloc): New.
Many more changes througout file.
The command line completion has spoiled me. Thus the lack of completion with
the "handle" command annoys me. Patch!
This does a few things:
- adds a VEC_merge helper
- adds a generic signal completer
- adds a completion handler for the "handle" command
- sets the completion handler for the "signal" command
URL: http://sourceware.org/bugzilla/show_bug.cgi?id=10436
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* elf.c (IS_VALID_GROUP_SECTION_HEADER) Add minsize param.
(setup_group): Adjust uses.
(bfd_section_from_shdr): Allow SHT_GROUP sections with just a flag
word.
Remove macros, folding them into...
(LA25_LUI_MICROMIPS): ... this new macro.
(LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise into...
(LA25_J_MICROMIPS): ... this new macro.
(LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise
into...
(LA25_ADDIU_MICROMIPS): ... this new macro.
(bfd_put_micromips_32, bfd_get_micromips_32): New functions.
(mips_elf_create_la25_stub): Use them.
(check_br32_dslot, check_br32, check_relocated_bzc): Likewise.
(_bfd_mips_elf_relax_section): Likewise.
* cli/cli-cmds.c (enablebreaklist): Move it to breakpoint.c.
(skiplist): Move it to skip.c.
(init_cmd_lists): Remove code setting enablebreaklist and
skiplist to NULL.
* breakpoint.c (enablebreaklist): Moved from cli/cli-cmds.c.
* cli/cli-cmds.h: Remove declaration of enablebreaklist and
skiplist.
* gdbcmd.h: Likewise.
* skip.c (_initialize_step_skip): Move 'skiplist' from
cli/cli-cmds.c.
(make_command_stats_cleanup): Initialize it.
(report_command_stats): Subtract time waiting for user.
(prompt_for_continue): Track time waiting for user.
(defaulted_query): Track time waiting for user.
UNOP_MEMVAL_TYPE.
* expprint.c (print_subexp_standard, case OP_TYPE): New.
(print_subexp_standard, case UNOP_CAST_TYPE): Don't increment pos.
(print_subexp_standard, case UNOP_DYNAMIC_CAST): Ditto.
(print_subexp_standard, case UNOP_REINTERPRET_CAST): Ditto.
(print_subexp_standard, case UNOP_MEMVAL_TYPE): Ditto.
(dump_subexp_body_standard, case UNOP_DYNAMIC_CAST): Don't increment
elt.
(dump_subexp_body_standard, case UNOP_REINTERPRET_CAST): Ditto.
(dump_subexp_body_standard, case UNOP_CAST_TYPE): Ditto.
(dump_subexp_body_standard, case UNOP_MEMVAL_TYPE): Ditto.
(dump_prefix_expression): Handle OP_TYPE.
testsuite/
* gdb.base/debug-expr.c: New file.
* gdb.base/debug-expr.exp: New file.
* gdb.base/exprs.exp: Test {type} casts.
* gdb.cp/debug-expr.exp: New file.
* common/gdb_string.h: ... here.
* common/vec.h: Remove #ifndef GDBSERVER conditional inclusion of
gdb_string.h and gdb_assert.h.
gdbserver/
* configure.ac: Add check for strstr.
* config.in: Regenerate.
* configure: Regenerate.
* linux-thread-db.c: #include "gdb_vecs.h".
(try_thread_db_load_from_pdir_1): New arg "subdir". All callers
updated.
(try_thread_db_load_from_pdir): New arg "subdir". All callers updated.
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
gdbserver/
* Makefile.in (SFILES): Add gdb_vecs.c.
(OBS): Add gdb_vecs.o.
(gdb_vecs_h, host_defs_h): New variables.
(thread-db.o): Add $(gdb_vecs_h) dependency.
(gdb_vecs.o): New rule.
* thread-db.c: #include "gdb_vecs.h".
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
* gas/i386/prefetch.s: New file.
* gas/i386/prefetch.d: New file.
* gas/i386/prefetch-intel.d: New file.
* gas/i386/x86-64-prefetch.d: New file.
* gas/i386/x86-64-prefetch-intel.d: New file.
* gas/i386/i386.exp: Run them.
opcodes/
* i386-dis.c (reg_table): Fill out REG_0F0D table with
AMD-reserved cases as "prefetch".
(MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
(MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
(reg_table): Use those under REG_0F18.
(mod_table): Add those cases as "nop/reserved".
* gdb.base/valgrind-infcall.exp (continue #$continue_count): Use
global variable loop, not a 'break'. Add loop count limit to 100.
Add new fail case for terminated vgdb.
prefixes for other than FS/GS in 64-bit mode. If doing so at all, it
should clearly do this correctly. Determining the default segment,
however, requires to take into consideration RegRex (so far, RSP, RBP,
R12, and R13 were all treated equally here).
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386-intel.c (build_modrm_byte): Split determining
default segment from figuring out encoding. Honor RegRex for
the former.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/x86-64-segovr.{s,l}: New.
* gas/i386/i386.exp: Run new test.
xmm/ymm registers are distinct. This patch adds code to check for this,
and at once eliminates a superfluous check for not using PC-relative
addressing for these instructions (the fact that an index register is
required here already excludes valid PC-relative addresses). The
severity of the resulting diagnostics can be controlled via command
line option or directive.
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (set_check): Renamed from set_sse_check.
Generalize to also handle operand checking option.
(enum i386_error): New enumerator 'invalid_vector_register_set'.
(match_template): Handle it.
(enum check_kind): Give it a tag. Drop sse_ prefixes from
enumerators.
(operand_check): New.
(md_pseudo_table): Add "operand_check".
(check_VecOperands): Don't special case RIP addressing. Check
that vSIB operands use distinct vector registers unless no
checking was requested.
(OPTION_MOPERAND_CHECK): New.
(md_parse_option): Handle it.
(OPTION_MAVXSCALAR, OPTION_X32): Adjust.
(md_longopts): Add "moperand-check".
(md_show_usage): Add help text for it.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/vgather-check-error.{s,l}: New.
* gas/i386/vgather-check-none.{s,d}: New.
* gas/i386/vgather-check-warn.{d,e}: New.
* gas/i386/vgather-check.{s,d}: New.
* gas/i386/x86-64-vgather-check-error.{s,l}: New.
* gas/i386/x86-64-vgather-check-none.{s,d}: New.
* gas/i386/x86-64-vgather-check-warn.{d,e}: New.
* gas/i386/x86-64-vgather-check.{s,d}: New.
* gas/i386/i386.exp: Run new tests.
got treated identically to the ones in the base range, due to not
paying attention to the fact that reg_entry's reg_num field doesn't
fully specify the register number (reg_flags also needs to be checked
for RegRex). This patch introduces and uses a new (inline) function to
obtain the full register number, and uses it to fix all those cases.
It additionally adds the missing operand checks for SVME instructions
(which match the monitor/mwait ones).
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (register_number): New function.
(build_vex_prefix, process_immext, process_operands,
build_modrm_byte, i386_index_check): Use it.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/x86-64-specific-reg.{s,l}: New.
* gas/i386/i386.exp: Run new test.
opcodes/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl: Remove "FIXME" comments from SVME instructions.
PR 11804
* defs.h (find_memory_region_ftype): New comment. New arg modified.
* fbsd-nat.c (fbsd_find_memory_regions): Add the passed modified value.
* gcore.c (gcore_create_callback): New function comment. Add modified
parameter. Only write modified regions. Set SEC_READONLY exactly
according to MODIFIED.
(objfile_find_memory_regions): Ignore separate debug info files. Ass
the passed modified value to FUNC.
* gnu-nat.c (gnu_find_memory_regions): Add the passed modified value.
* linux-tdep.c (linux_find_memory_regions): Try to reads smaps file
first. New variables modified and has_anonymous. Parse the lines of
smaps file. Add the passed MODIFIED value to FUNC.
* procfs.c (find_memory_regions_callback): Add the passed modified
value.
gdb/testsuite/
PR 11804
* gdb.base/gcore-relro.exp: New file.
* gdb.base/gcore-relro-main.c: New file.
* gdb.base/gcore-relro-lib.c: New file.
