The vdso.exp test checks that we can access the VDSO memory when replaying.
Depending on the line information generated by the compiler, runto_main may run
to the line marked with bp.1 or stop before that line. The test incorrectly
assumes that it will always run to the marked line and fails if it doesn't.
The test does not really care about what is traced. It does care that GDB is
replaying when capturing the second disassemble output.
Reflect that in the test by ignoring the output of the stepping and record goto
begin commands and by checking that GDB is actually replaying.
testsuite/
* gdb.btrace/vdso.c (main): Remove breakpoint markers.
* gdb.btrace/vdso.exp: Change stepping command to "next" and ignore
its output. Ignore the output of "record goto begin" and instead
check that GDB is replaying.
This patch fixes this racy failure, with the native-extended-gdbserver
board:
(gdb) run
Starting program: build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run
Remote debugging from host 127.0.0.1
Process build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run created; pid = 23832
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading /lib64/libm.so.6 from remote target...
Reading /lib64/libc.so.6 from remote target...
[Inferior 1 (process 23832) exited with code 01]
(gdb) FAIL: gdb.base/a2-run.exp: run "a2-run" with no args
PASS: gdb.base/a2-run.exp: no spurious messages at program exit
run 5
Starting program: build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run 5
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
usage: factorial <number>
Child exited with status 1
Note that the output is correct; it's just that inferior output
appeared after gdb's output, and the test doesn't handle that
correctly.
This comment isn't really correct, unfortunately:
# waiting. If we had already seen the status wrapper exit,
# gdb_test_multiple/expect has no spawn ids left, and thus
# returns.
That's true of expect in general, but I had missed / forgot that
gdb_test_multiple internally has extra matches using "-i
$gdb_spawn_id", so even if the caller clears all the indirect spawn id
lists, gdb_test_multiple will continue waiting.
So do a conditional exp_continue manually instead.
gdb/testsuite/ChangeLog:
2015-10-09 Pedro Alves <palves@redhat.com>
* gdb.base/a2-run.exp (maybe_exp_continue): New procedure.
(top level): Use it in the run with no args test.
gdb/ChangeLog:
* d-exp.y: (UnaryExpression): Support `type.sizeof' expressions.
(PostfixExpression): Support `expr.sizeof' expressions.
(PrimaryExpression): Support `typeof(expr)' expressions.
gdb/testsuite/ChangeLog:
* gdb.dlang/properties.exp: New file.
record_btrace_resume returns the void return from the to_resume method of the
target beneath. Split this into calling to_resume and return.
gdb/
* record-btrace.c (record_btrace_resume): Fix void return.
'template' is used in include/opcode/aarch64.h as below,
typedef struct
{
const char *template;
uint32_t value;
int has_xt;
} aarch64_sys_ins_reg;
and it triggers compilation errors when GDB is built in C++ mode.
In file included from git/gdb/aarch64-tdep.c:62:0:
git/gdb/../include/opcode/aarch64.h:651:15: error: expected unqualified-id before 'template'
const char *template;
This patch is to rename field template to name.
gas/
* config/tc-aarch64.c (md_begin): Access field 'name' rather
than 'template'.
include/opcode/
* aarch64.h (aarch64_sys_ins_reg) <template>: Removed.
<name>: New field.
opcodes/
* aarch64-dis.c (aarch64_ext_sysins_op): Access field
'name' rather than 'template'.
* aarch64-opc.c (aarch64_print_operand): Likewise.
This is sufficient to link an aarch64 GDB built in C++ mode. Pedro
did something similar in Feb
https://sourceware.org/ml/binutils/2015-02/msg00176.html
include/opcode/
2015-10-07 Yao Qi <yao.qi@linaro.org>
* aarch64.h [__cplusplus]: Wrap in extern "C".
In this patch, we start to use aarch64_decode_insn to decode instructions
in aarch64_software_single_step.
gdb:
2015-10-07 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c: Include opcode/aarch64.h.
(submask): Move it above.
(bit): Likewise.
(bits): Likewise.
(aarch64_software_single_step): Call aarch64_decode_insn.
Decode instruction by aarch64_inst instead of using
aarch64_decode_bcond and decode_masked_match.
When applying a GOTDATA_OP* relocation to a local symbol, the addend
is being applied after getting the value of the symbol. When the
relocation refers to a merge section, however, the addend must be
provided when computing the symbol value, since the contents of
the section may have been rearranged.
gold/
PR gold/18855
* sparc.cc (Sparc_relocate_functions::gdop_hix22): Remove addend
parameter.
(Sparc_relocate_functions::gdop_lox10): Likewise.
(Target_sparc::Relocate::relocate): Use addend when computing
symbol value for R_SPARC_GOTDATA_OP*.
It is better to clear the ch_reserved field of Elf64_External_Chdr
in 64-bit output.
* bfd.c (bfd_update_compression_header): Clear the ch_reserved
field in 64-bit output.
(bfd_convert_section_contents): Likewise.
Following failures are noticed for avr-gdb. This may be the case
for targets like AVR which has integer_to_address hook defined.
FAIL: gdb.base/dump.exp: struct copy, srec; value restored ok
FAIL: gdb.base/dump.exp: struct copy, ihex; value restored ok
FAIL: gdb.base/dump.exp: struct copy, tekhex; value restored ok
These tests are failed because load_offset(bias) of restore command
parsed as address.
command: restore filename [binary] bias start end
Except binary, other BFDs have a built-in location; gdb restores content
at offset 'bias' from that location. So, 'bias' of 'restore' command should
be parsed as address only when the file is binary.
Below patch changes gdb to parse 'bias' as long if the file is not binary.
gdb/ChangeLog
2015-10-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* cli/cli-dump.c (restore_command): Parse load_offset (bias) as address
only when the file is binary.
For ELF linker, a common symbol isn't a definition. When we decide if a
symbol should be re-exported, we should check if the symbol isn't
undefined, not if it is a definition.
bfd/
PR ld/18914
* elflink.c (elf_link_add_object_symbols): Don't re-export a
symbol if it isn't undefined.
ld/testsuite/
PR ld/18914
* ld-elf/exclude.exp: Also check exclude_common.
* ld-elf/exclude2.s: Add exclude_common.
The ch_type field in struct Chdr_data<64> is 4 bytes, followed by a
4-byte padding. This change doesn't introduce any functional change
since only the lower 32 bits of the ch_type field are used.
PR gold/19060
* elfcpp.h (Chdr::get_ch_type): Change return type to Elf_Word.
* elfcpp_internal.h (Chdr_data<64>): Change ch_type to 4 bytes
and add ch_reserved.
The stack unwinder did not understand the function prologs
generated by gcc with -Os. Add code to recognize and interpret the
prolog calls.
[gdb]
2015-10-02 James Bowman <james.bowman@ftdichip.com>
* ft32-tdep.c (ft32_analyze_prologue): Add function prolog
subroutine handling.
2015-10-02 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.dwarf2/staticvirtual.exp: Generalize regexp so it can match
whether or not address 0x1000 is mapped on the target.
bfd/
2015-10-02 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Add
TLSIE_MOVW_GOTTPREL_G1.
(aarch64_tls_transition_without_check): Add
TLSIE_MOVW_GOTTPREL_G1 to TLSLE_MOVW_TPREL_G2
transition for local symbol.
(elfNN_aarch64_tls_relax): Add a argument to pass tp offset.
Add TLSIE_MOVW_GOTTPREL_G1 relaxation.
(elfNN_aarch64_relocate_section): Call elfNN_aarch64_tls_relax
with new argument.
ld/testsuite/
2015-10-02 Renlin Li <renlin.li@arm.com>
* ld-aarch64/aarch64-elf.exp (tls-relax-large-le-ie): Run new test.
* ld-aarch64/tls-relax-large-ie-le.d: New.
* ld-aarch64/tls-relax-large-ie-le.s: New.
bfd/
2015-10-02 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c(IS_AARCH64_TLS_RELAX_RELOC):
Add relaxation support for TLSGD_MOVW_G0_NC and TLSGD_MOVW_G1.
(aarch64_tls_transition_without_check): Likewise
(elfNN_aarch64_tls_relax): Likwise.
ld/testsuite/
2015-10-02 Renlin Li <renlin.li@arm.com>
* ld-aarch64/aarch64-elf.exp: run new test
* ld-aarch64/tls-relax-large-gd-ie.d: New.
* ld-aarch64/tls-relax-large-gd-ie.s: New.
* ld-aarch64/tls-relax-large-gd-le.d: New.
* ld-aarch64/tls-relax-large-gd-le.s: New.
We want to use disas_aarch64_insn inside GDB to decode instructions, so
this patch exposes it and rename it to aarch64_decode_insn to follow
the conventions of other interfaces.
include/opcode:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Declare it.
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove static. Change
argument insn type to aarch64_insn. Rename to ...
(aarch64_decode_insn): ... it.
(print_insn_aarch64_word): Caller updated.
I happen to see that argument pc is not used inside disas_aarch64_insn
at all. This patch is to remove it.
OK to apply?
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove argument PC.
(print_insn_aarch64_word): Caller updated.
Since something like ".long foo - ." may be used as pointer, we make
sure that PLT is used if foo is a function defined in a shared library.
bfd/
PR ld/19031
* elf64-x86-64.c (elf_x86_64_check_relocs): Set
pointer_equality_needed for R_X86_64_PC32 reloc in non-code
sections.
ld/testsuite/
PR ld/19031
* ld-x86-64/x86-64.exp: Run PR ld/19031 test.
* ld-x86-64/pr19031.out: New file.
* ld-x86-64/pr19031a.c: Likewise.
* ld-x86-64/pr19031b.S: Likewise.
* ld-x86-64/pr19031c.c: Likewise.
Eli Zaretskii
Markus Metzger
Pedro Alves
GDB Administrator
Iain Buclaw
Maciej W. Rozycki
Nick Clifton
Yao Qi
Andreas Schwab
Cary Coutant
H.J. Lu
Pitchumani Sivanupandi
jamesbowman
Sandra Loosemore
Renlin Li
Simon Marchi