Double-quoted words in Tcl have substitutions performed on them, including
backslash substitutions. That isn't terribly nice for regular expressions,
so use braced words instead.
2015-09-28 Segher Boessenkool <segher@kernel.crashing.org>
gcc/testsuite/
* gcc.dg/asm-4.c: Use braced words for the regular expressions.
From-SVN: r228227
2015-09-28 Paul Thomas <pault@gcc.gnu.org>
PR fortran/40054
PR fortran/63921
* decl.c (get_proc_name): Return if statement function is
found.
* expr.c (gfc_check_vardef_context): Add error return for
derived type expression lacking the derived type itself.
* match.c (gfc_match_ptr_fcn_assign): New function.
* match.h : Add prototype for gfc_match_ptr_fcn_assign.
* parse.c : Add static flag 'in_specification_block'.
(decode_statement): If in specification block match a statement
function, then, if no error arising from statement function
matching, try to match pointer function assignment.
(parse_interface): Set 'in_specification_block' on exiting from
parse_spec.
(parse_spec): Set and then reset 'in_specification_block'.
(gfc_parse_file): Set 'in_specification_block'.
* resolve.c (get_temp_from_expr): Extend to include functions
and array constructors as rvalues..
(resolve_ptr_fcn_assign): New function.
(gfc_resolve_code): Call it on finding a pointer function as an
lvalue. If valid or on error, go back to start of resolve_code.
* symbol.c (gfc_add_procedure): Add a sentence to the error to
flag up the ambiguity between a statement function and pointer
function assignment at the end of the specification block.
2015-09-28 Paul Thomas <pault@gcc.gnu.org>
PR fortran/40054
PR fortran/63921
* gfortran.dg/fmt_tab_1.f90: Change from run to compile and set
standard as legacy.
* gfortran.dg/fmt_tab_2.f90: Add extra tab error.
* gfortran.dg/function_types_3.f90: Change error message to
"Type inaccessible...."
* gfortran.dg/ptr_func_assign_1.f08: New test.
* gfortran.dg/ptr_func_assign_2.f08: New test.
2015-09-25 Mikael Morin <mikael.morin@sfr.fr>
PR fortran/40054
PR fortran/63921
* gfortran.dg/ptr_func_assign_3.f08: New test.
* gfortran.dg/ptr_func_assign_4.f08: New test.
From-SVN: r228222
Re: [PATCH] Fix undefined behaviour in arc port
* config/arc/arc.c (arc_legitimize_reload_address): Fix stupid
thinko in last change.
* config/arc/constraints.md (C2a): Fix typos in last change.
From-SVN: r228219
Redesign Graphite scop detection for faster compiler time and detecting more SCoPs.
Existing algorithm for SCoP detection in graphite was based on dominator tree
where a tree (CFG) traversal was required for analyzing an SESE. The tree
traversal is linear in the number of basic blocks and SCoP detection is
(probably) linear in number of instructions. That algorithm utilized a generic
infrastructure of SESE which does not directly represent loops. With regards to
graphite framework, we are only interested in subtrees with loops. The new
algorithm is geared towards tree traversal on loop structure. The algorithm is
linear in number of loops which is faster than the previous algorithm.
Briefly, we start the traversal at a loop-nest and analyze it recursively for
validity. Once a valid loop is found we find a valid adjacent loop. If an
adjacent loop is found and is valid, we merge both loop nests otherwise we form
a SCoP from the previous loop nest, and resume the algorithm from the adjacent
loop nest. The data structure to represent an SESE is an ordered pair of edges
(entry, exit). The new algoritm can extend a SCoP in both the directions. With
this approach, the number of instructions to be analyzed for validity reduces to
a minimal set. We start by analyzing those statements which are inside a loop,
because validity of those statements is necessary for the validity of loop. The
statements outside the loop nest can be just excluded from the SESE if they are
not valid.
This patch depends on: https://gcc.gnu.org/ml/gcc-patches/2015-09/msg02024.html
Passes (c,c++,fortran) regtest and bootstrap.
gcc/ChangeLog:
2015-09-27 Aditya Kumar <hiraditya@msn.com>
Sebastian Pop <s.pop@samsung.com>
* graphite-optimize-isl.c (optimize_isl):
* graphite-scop-detection.c (struct sese_l): New type.
(get_entry_bb): API for getting entry bb of SESE.
(get_exit_bb): API for getting exit bb of SESE.
(class debug_printer): New type. Simple printer in debug mode.
(trivially_empty_bb_p): New. Return true when BB is empty or
contains only debug instructions.
(graphite_can_represent_expr): Call scalar_evoution_in_region
instead of analyze_scalar_evolution. Pass in scop instead of only
the scop entry.
(stmt_has_simple_data_refs_p): Pass in scop instead of only the
scop entry.
(stmt_simple_for_scop_p): Same.
(harmful_stmt_in_bb): Same.
(graphite_can_represent_loop): Deleted.
(struct scopdet_info): Deleted.
(scopdet_basic_block_info): Deleted.
(build_scops_1): Deleted.
(bb_in_sd_region): Deleted.
(find_single_entry_edge): Deleted.
(find_single_exit_edge): Deleted.
(create_single_entry_edge): Deleted.
(sd_region_without_exit): Deleted.
(create_single_exit_edge): Deleted.
(unmark_exit_edges): Deleted.
(mark_exit_edges): Deleted.
(create_sese_edges): Deleted.
(build_graphite_scops): Deleted.
(canonicalize_loop_closed_ssa): Recompute all dominators at the
end.
(build_scops): Use the new scop_builder to build scops.
(dot_all_scops_1): Use the new pretty printer. Print loop father
as well.
(loop_body_is_valid_scop): New. Return true if loop body is a
valid scop.
(class scop_builder): New. Builds SCoPs for polyhedral
optimizatios.
(scop_builder): New. Constructor.
(static sese_l invalid_sese): sese_l with invalid edges.
(get_sese): Get an sese (from a loop) if possible, invalid_sese
otherwise.
(get_nearest_dom_with_single_entry): Get nearest dominator of a
basic_block with single entry. Return NULL if we get to the
beginning of a function.
(get_nearest_pdom_with_single_exit): Get nearest post-dominator of
a basic_block with single exit. Return NULL if we get to the
beginning of a function.
(print_sese): Pretty-print SESE.
(merge_sese): Merge two SESEs if possible and return the new SESE.
(build_scop_depth): Start building the SCoP within a loop nest.
(build_scop_breadth): Start building the SCoP at a single loop
depth. Merge adjacent SESEs if valid.
(can_represent_loop_1): Returns true if Graphite can represent
loop inside SCoP. Helper for can_represent_loop.
(can_represent_loop): Returns true if Graphite can represent LOOP
and all its nested loops in SCoP.
(loop_is_valid_scop): Returns true if LOOP and all its nests
constitute a valid SCoP.
(region_has_one_loop): Returns true of a region has only one loop.
(add_scop): Add SCoP to the list of valid scops. Removes an
already existing scop if it intersects with or subsumed by this
one.
(harmful_stmt_in_region): Returns true if SCoP has any statment
which cannot be represented by Graphite.
(subsumes): Returns true of SCoP S1 subsumes SCoP S2.
(remove_subscops): Remove any SCoP from the list of already found
SCoPs, if subsumed by S1.
(intersects): Return true if region bounded by SCoPs S1 and S2
intersect.
(remove_intersecting_scops): Remove any SCoP which intersects with
S1.
* graphite.c (print_graphite_scop_statistics):
(print_graphite_statistics): Print SCoP info while debugging.
(graphite_initialize): Early exit in case number of loops in a
function is less than PARAM_GRAPHITE_MIN_LOOPS_PER_FUNCTION or
basic blocks are more than PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION.
(graphite_finalize):
* params.def: Add PARAM_GRAPHITE_MIN_LOOPS_PER_FUNCTION.
* sese.h (sese_loop_depth): Remove unnecessary gcc_assert.
(recompute_all_dominators): Recalculate POST_DOMINATORS.
* tree-cfg.c (print_loops): Print the function name while printing
loops.
gcc/testsuite/ChangeLog:
2015-09-27 Aditya Kumar <hiraditya@msn.com>
Sebastian Pop <s.pop@samsung.com>
* gcc.dg/graphite/block-1.c: Modified to match the pattern.
* gcc.dg/graphite/block-3.c: Same.
* gcc.dg/graphite/block-4.c: Same.
* gcc.dg/graphite/block-5.c: Same.
* gcc.dg/graphite/block-6.c: Same.
* gcc.dg/graphite/block-7.c: Same.
* gcc.dg/graphite/block-8.c: Same.
* gcc.dg/graphite/block-pr47654.c: Same.
* gcc.dg/graphite/interchange-0.c: Same.
* gcc.dg/graphite/interchange-1.c: Same.
* gcc.dg/graphite/interchange-10.c: Same.
* gcc.dg/graphite/interchange-11.c: Same.
* gcc.dg/graphite/interchange-12.c: Same.
* gcc.dg/graphite/interchange-13.c: Same.
* gcc.dg/graphite/interchange-14.c: Same.
* gcc.dg/graphite/interchange-15.c: Same.
* gcc.dg/graphite/interchange-3.c: Same.
* gcc.dg/graphite/interchange-4.c: Same.
* gcc.dg/graphite/interchange-5.c: Same.
* gcc.dg/graphite/interchange-6.c: Same.
* gcc.dg/graphite/interchange-7.c: Same.
* gcc.dg/graphite/interchange-8.c: Same.
* gcc.dg/graphite/interchange-9.c: Same.
* gcc.dg/graphite/interchange-mvt.c: Same.
* gcc.dg/graphite/pr35356-1.c (foo): Same.
* gcc.dg/graphite/pr35356-3.c: Same.
* gcc.dg/graphite/pr37485.c: Same.
* gcc/testsuite/gcc.dg/graphite/run-id-pr67700-1.c: New test case.
* gcc.dg/graphite/scop-1.c (int toto): Modified to match the pattern.
* gcc.dg/graphite/scop-11.c: Same.
* gcc.dg/graphite/scop-5.c: Same.
* gcc.dg/graphite/uns-block-1.c: Same.
* gcc.dg/graphite/uns-interchange-9.c: Same.
* gfortran.dg/graphite/block-1.f90: Same.
* gfortran.dg/graphite/interchange-3.f90: Same.
* gfortran.dg/graphite/pr14741.f90: Same.
From-SVN: r228215
fix PR67700
The patch makes the detection of scop parameters in parameter_index_in_region a
bit more conservative by discarding scalar variables defined in function of data
references defined in the scop.
2015-09-25 Aditya Kumar <aditya.k7@samsung.com>
Sebastian Pop <s.pop@samsung.com>
PR tree-optimization/67700
* graphite-sese-to-poly.c (parameter_index_in_region): Call
invariant_in_sese_p_rec.
(extract_affine): Same.
(rewrite_cross_bb_scalar_deps): Call update_ssa.
* sese.c (invariant_in_sese_p_rec): Export. Handle vdefs and vuses.
* sese.h (invariant_in_sese_p_rec): Declare.
* testsuite/gcc.dg/graphite/run-id-pr67700.c: New.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r228214
Now that muser-mode is default the multilib definitions does not require to
specify that switch any more. Add UT699 to multilib after recent patches. Add
AT697F multilib since there are many LEON2 users running RTEMS. Add leon to
multilib too.
gcc/
* config/sparc/t-rtems: Remove -muser-mode. Add ut699, at697f and leon.
From-SVN: r228204
PR rtl-optimization/67456
PR rtl-optimization/67464
PR rtl-optimization/67465
* ifcvt.c (noce_try_cmove_arith): Bail out if cannot conditionally
move in the mode of x. Handle combination of complex and simple
block pairs as well as the case when one is empty.
* gcc.dg/pr67465.c: New test.
From-SVN: r228194
2015-09-28 Daniel Cederman <cederman@gaisler.com>
Use leon3 target for native LEON on Linux. Linux requires LEON version 3 or
above with CASA support.
gcc/
* config/sparc/driver-sparc.c: map LEON to leon3
From-SVN: r228185
2015-09-28 Daniel Cederman <cederman@gaisler.com>
Make muser-mode the default for LEON3
The muser-mode flag causes the CASA instruction for LEON3 to use the
user mode ASI. This is the correct behavior for almost all LEON3 targets.
For this reason it makes sense to make user mode the default.
gcc/
* config/sparc/sparc.opt: Rename mask from USER_MODE to SV_MODE
and make it inverse to change default
* config/sparc/sync.md: Only use supervisor ASI for CASA when in
supervisor mode
* doc/invoke.texi: Document change of default
From-SVN: r228184
2015-09-28 Daniel Cederman <cederman@gaisler.com>
Do not use floating point registers when compiling with -msoft-float for SPARC
__builtin_apply* and __builtin_return accesses the floating point registers on
SPARC even when compiling with -msoft-float.
gcc/
* config/sparc/sparc.c (sparc_function_value_regno_p): Do not return
true on %f0 for a target without FPU.
* config/sparc/sparc.md (untyped_call): Do not save %f0 for a target
without FPU.
(untyped_return): Do not load %f0 for a target without FPU.
From-SVN: r228183
2015-09-28 Andrew Pinski <apinski@cavium.com>
* config/aarch64/aarch64.md (prefetch):
Change the predicate of operand 0 to register_operand.
From-SVN: r228182
* config/i386/predicates.md (register_sse4nonimm_operand): New
predicate.
* config/i386/sse.md (PEXTR_MODE12): New mode iterator.
(*vec_extract<mode>): Use PEXTR_MODE12 instead of VI12_128 mode.
Use register_sse4nonimm_operand as operand 0 predicate.
(*vec_extractv8hi_sse2): Remove insn pattern.
(*vec_extract<PEXTR_MODE12:mode>_zext): Merge insn pattern from
*vec_extractv8hi_zext and *vec_extractv16qi_zext patterns.
From-SVN: r228178
gcc/
PR target/67391
* config/sh/sh-protos.h (sh_lra_p): Declare.
* config/sh/sh.c (sh_lra_p): Make non-static.
* config/sh/sh.md (addsi3): Use arith_reg_dest for operands[0] and
arith_reg_operand for operands[1]. Remove TARGET_SHMEDIA case.
Expand into addsi3_scr if operands[2] if needed.
(*addsi3_compact): Rename to *addsi3_compact_lra. Use
arith_reg_operand for operands[1]. Allow it only when LRA is enabled.
(addsi3_scr, *addsi3): New insn_and_split patterns.
Co-Authored-By: Kaz Kojima <kkojima@gcc.gnu.org>
From-SVN: r228176
Revert the fragile and complicated changes to assign_parms designed to
enable it to use RTL assigments chosen by cfgexpand, and instead have
cfgexpand use the RTL assignments by assign_parms, keying them off of
the default defs that are now necessarily introduced for each parm and
result. The possible lack of a default def was already a problem, and
the fallbacks in place were not enough, as shown by PR67312. We now
have checking asserts in set_rtl that verify that we're assigning to
each var a piece of RTL that matches the expectations set forth by
use_register_for_decl.
for gcc/ChangeLog
PR rtl-optimization/64164
PR tree-optimization/67312
PR middle-end/67340
PR middle-end/67490
PR bootstrap/67597
* cfgexpand.c (parm_in_stack_slot_p): Remove.
(ssa_default_def_partition): Remove.
(get_rtl_for_parm_ssa_default_def): Remove.
(set_rtl): Check that RTL assignments match expectations.
Loop on SUBREGs, CONCATs and PARALLELs subexprs. Set only the
default def location for params and results. Record SSA names
or types in REG and MEM attrs, respectively.
(set_parm_rtl): New.
(expand_one_ssa_partition): Drop logic that assigned MEMs with
unassigned addresses.
(adjust_one_expanded_partition_var): Don't accept NULL RTL on
deferred stack alloc vars.
(expand_used_vars): Skip partitions holding parm default defs.
Move adjust_one_expanded_partition_var loop...
(pass_expand::execute): ... here. Drop redundant assert.
Adjust comments before the final loop over all ssa names.
Require assigned rtl of parms and results to match exactly.
Reset its attributes to match them, not any other variables in
the same partition.
(expand_debug_expr): Use entry value for PARM's default defs
only iff they have zero nondebug uses.
* cfgexpand.h (parm_in_stack_slot_p): Remove.
(get_rtl_for_parm_ssa_default_def): Remove.
(set_parm_rtl): Declare.
* doc/invoke.texi: Improve wording.
* explow.c (promote_decl_mode): Fix promote_function_mode for
result decls not by reference.
(promote_ssa_mode): Disregard BLKmode from promote_decl, and
bypass TYPE_MODE to get the actual vector mode.
* function.c: Include tree-dfa.h. Revert 2015-08-14's and
2015-08-19's changes as follows. Drop include of
basic-block.h and df.h.
(rtl_for_parm): Remove.
(maybe_reset_rtl_for_parm): Remove.
(parm_in_unassigned_mem_p): Remove.
(use_register_for_decl): Add logic for RESULT_DECLs matching
assign_parms' behavior.
(split_complex_args): Revert.
(assign_parms_augmented_arg_list): Revert. Add comment
referencing the logic above.
(assign_parm_adjust_stack_rtl): Revert.
(assign_parm_setup_block): Revert. Use set_parm_rtl instead
of SET_DECL_RTL. Set up a REG if the parm demands so.
(assign_parm_setup_reg): Revert. Consolidated SET_DECL_RTL
calls into a single set_parm_rtl. Set up a temporary RTL
temporarily for expand_assignment.
(assign_parm_setup_stack): Revert. Use set_parm_rtl.
(assign_parms_unsplit_complex): Revert. Use set_parm_rtl.
(assign_bounds): Revert.
(assign_parms): Revert. Use set_parm_rtl.
(allocate_struct_function): Relayout result and parms of
non-abstruct functions.
(expand_function_start): Revert. Use set_parm_rtl. If the
result is not a hard reg, create a pseudo from the promoted
mode of the default def. Promote static chain mode.
* tree-outof-ssa.c (remove_ssa_form): Drop unused
partition_has_default_def. Set up
partitions_for_parm_default_defs.
(finish_out_of_ssa): Remove partition_has_default_def.
Release partitions_for_parm_default_defs.
* tree-outof-ssa.h (struct ssaexpand): Remove
partition_has_default_def. Add
partitions_for_parm_default_defs.
* tree-ssa-coalesce.c: Include tree-dfa.h, tm_p.h and
stor-layout.h.
(build_ssa_conflict_graph): Fix conflict-detection of default
defs of even unused default defs of params and results.
(for_all_parms): New.
(create_default_def): New.
(register_default_def): New.
(coalesce_with_default): New.
(create_outofssa_var_map): Create default defs for all parms
and results, and register their partitions. Add GIMPLE_RETURN
operands as coalesce candidates with results. Add default
defs of each parm or result as coalesce candidates with its
other defs. Mark each result def, and each default def of
parms, as used_in_copy.
(gimple_can_coalesce_p): Call it. Call use_register_for_decl
with the ssa names, even anonymous ones. Drop
parm_in_stack_slot_p calls. Require same signedness and
alignment.
(coalesce_ssa_name): Add coalesce candidates for all defs of
each parm and result, even unused ones.
(parm_default_def_partition_arg): New type.
(set_parm_default_def_partition): New.
(get_parm_default_def_partitions): New.
* tree-ssa-coalesce.h (get_parm_default_def_partitions): New.
* tree-ssa-live.c (partition_view_init): Regard unused defs of
parms and results as used.
(verify_live_on_entry): Don't error out just because they're
not live.
for gcc/testsuite/ChangeLog
PR rtl-optimization/64164
PR tree-optimization/67312
* gcc.dg/pr67312.c: New. From Zdenek Sojka.
* gcc.target/i386/stackalign/return-4.c: Add -O.
From-SVN: r228175
This adds the missing deep copy when assiging a constructor of a derived
type with allocatable components to an array.
The check for constantness is removed so that the deep_copy argument passed
to gfc_trans_scalar_assign is set to true.
PR fortran/67721
gcc/fortran/
* trans-expr.c (gfc_trans_assignment_1): Remove the non-constantness
condition guarding deep copy.
gcc/testsuite/
* gfortran.dg/alloc_comp_deep_copy_3.f03: New.
From-SVN: r228170
2013-09-26 Paul Thomas <pault@gcc.gnu.org>
PR fortran/67567
* resolve.c (resolve_fl_procedure): For module procedures, take
the parent module name and the submodule name from the name of
the namespace.
From-SVN: r228169
* dwarf2out.c (XCOFF_DEBUGGING_INFO): Default 0 definition.
(HAVE_XCOFF_DWARF_EXTRAS): Default to 0 definition.
(output_fde): Don't output length for debug_frame on AIX.
(output_call_frame_info): Don't output length for debug_frame on AIX.
(have_macinfo): Force to False for XCOFF_DEBUGGING_INFO and not
HAVE_XCOFF_DWARF_EXTRAS.
(add_AT_loc_list): Return early if XCOFF_DEBUGGING_INFO and not
HAVE_XCOFF_DWARF_EXTRAS.
(output_compilation_unit_header): Don't output length on AIX.
(output_pubnames): Don't output length on AIX.
(output_aranges): Delete argument. Compute length locally. Don't
output length on AIX.
(output_line_info): Don't output length on AIX.
(dwarf2out_finish): Don't compute aranges_length.
* dwarf2asm.c (XCOFF_DEBUGGING_INFO): Default 0 definition.
(dw2_asm_output_nstring): Emit .byte not .ascii on AIX.
* config/rs6000/rs6000.c (rs6000_output_dwarf_dtprel): Emit correct
symbol decoration for AIX.
(rs6000_xcoff_debug_unwind_info): New.
(rs6000_xcoff_asm_named_section): Emit .dwsect pseudo-op
for SECTION_DEBUG.
(rs6000_xcoff_declare_function_name): Emit different
.function pseudo-op when DWARF2_DEBUG. Don't call
xcoffout_declare_function for DWARF2_DEBUG.
* config/rs6000/xcoff.h (TARGET_DEBUG_UNWIND_INFO):
Redefine.
* config/rs6000/aix71.h: New.
* configure.ac (gcc_cv_as_aix_dwloc): Check AIX as for DWARF
locations support.
* configure: Regenerate.
* config.gcc (powerpc-ibm-aix[789]+): New stanza for AIX 7.1+ with
DWARF support.
From-SVN: r228167
2015-09-25 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/67614
* resolve.c (gfc_resolve_code): Prevent ICE for invalid EXPR_NULL.
2015-09-25 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/67614
* gfortran.dg/pr67614.f90: New test.
From-SVN: r228156
2015-09-25 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/67525
* parse.c (match_deferred_characteristics): Remove an assert, which
allows an invalid SELECT TYPE selector to be detected.
2015-09-25 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/67525
* gfortran.dg/pr67525.f90: New test.
From-SVN: r228155
2015-09-25 Vladimir Makarov <vmakarov@redhat.com>
PR target/61578
* lra-constarints.c (match_reload): Check presence of the input pseudo
in the output pseudo.
From-SVN: r228153
