This patch removes the target macro LIBGCC2_LONG_DOUBLE_TYPE_SIZE.
After recent changes, this macro was used in two ways in libgcc: to
determine the mode of long double in dfp-bit.h, and to determine
whether a particular mode has excess precision for use in complex
multiplication.
The former is concerned specifically with long double: it relates to
use of strtold for converting between decimal and binary floating
point. This is replaced by comparing __LDBL_MANT_DIG__ with the
appropriate __LIBGCC_*_MANT_DIG__ macro. The latter is replaced
__LIBGCC_*_EXCESS_PRECISION__ predefined macros.
Remarks:
* Comparing (__LDBL_MANT_DIG__ == __LIBGCC_XF_MANT_DIG__) is more
fragile than it looks; it's possible for XFmode to have 53-bit
mantissa (TARGET_96_ROUND_53_LONG_DOUBLE, on FreeBSD and
DragonFlyBSD 32-bit), in which case such a comparison would not
distinguish XFmode and DFmode as possible modes for long double.
Fortunately, no target supporting that form of XFmode also supports
long double = double (but if some target did, we'd need e.g. an
additional macro giving the exponent range of each mode).
Furthermore, this code doesn't actually get used for x86 (or any
other target with XFmode support), because x86 uses BID not DPD and
BID has its own conversion code (which handles conversions for both
XFmode and TFmode without needing to go via strtold). And FreeBSD
and DragonFlyBSD aren't among the targets with DFP support. So
while in principle this code is fragile and it's a deficiency that
it can't support both XFmode and TFmode at once (something that
can't be solved with the string conversion approach without libc
having TS 18661 functions such as strtof128), all these issues
should not be a problem in practice.
* If other cases of excess precision are supported in future, the code
for defining __LIBGCC_*_EXCESS_PRECISION__ may need updating.
Although the most likely such cases might not actually involve
excess precision for any mode used in libgcc - FLT_EVAL_METHOD being
32 to do _Float16 arithmetic on _Float32 should have the effect of
_Complex _Float16 arithmetic using __mulsc3 and __divsc3, rather
than currently nonexistent __mulhc3 and __divhc3 as in bug 63250 for
ARM.
* As has been noted in the context of simultaneous support for
__float128 and __ibm128 on Power, the semantics of macros such as
LONG_DOUBLE_TYPE_SIZE are problematic because they rely on a
poorly-defined precision value for floating-point modes (which seems
to be intended as the number of significant bits in the
representation, e.g. 80 for XFmode which may be either 12 or 16
bytes) uniquely identifying a mode (although defining an arbitrarily
different value for one of the modes you wish to distinguish may
work as a hack). It would be cleaner to have a target hook that
gives a machine mode directly for float, double and long double,
rather than going via these precision values. By eliminating all
use of these macros (FLOAT_TYPE_SIZE, DOUBLE_TYPE_SIZE,
LONG_DOUBLE_TYPE_SIZE) from code built for the target, this patch
facilitates such a conversion to a hook (which I suppose would take
some suitable enum as an argument to identify which of the three
types to return a mode for).
(The issue of multiple type support for DFP conversions would apply
in that Power case.
<https://gcc.gnu.org/ml/gcc-patches/2014-07/msg01084.html> doesn't
seem to touch on it, but it would seem reasonable to punt on it
initially as hard to fix. There would also be the issue of getting
functions such as __powikf2, __mulkc3, __divkc3 defined, but that's
rather easier to address.)
Bootstrapped with no regressions on x86_64-unknown-linux-gnu.
gcc:
* doc/tm.texi.in (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* doc/tm.texi: Regenerate.
* system.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Poison.
* config/alpha/alpha.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/i386/i386-interix.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE):
Remove.
* config/i386/i386.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/i386/rtemself.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/ia64/ia64.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/m68k/m68k.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/m68k/netbsd-elf.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE):
Remove.
* config/mips/mips.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/mips/n32-elf.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/msp430/msp430.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/rl78/rl78.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/rs6000/rs6000.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/rx/rx.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/s390/s390.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/sparc/freebsd.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/sparc/linux.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/sparc/linux64.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
* config/sparc/netbsd-elf.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE):
Remove.
gcc/c-family:
* c-cppbuiltin.c (c_cpp_builtins): Define
__LIBGCC_*_EXCESS_PRECISION__ macros for supported floating-point
modes.
libgcc:
* dfp-bit.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
(__LIBGCC_XF_MANT_DIG__): Define if not already defined.
(LONG_DOUBLE_HAS_XF_MODE): Define in terms of
__LIBGCC_XF_MANT_DIG__.
(__LIBGCC_TF_MANT_DIG__): Define if not already defined.
(LONG_DOUBLE_HAS_TF_MODE): Define in terms of
__LIBGCC_TF_MANT_DIG__.
* libgcc2.c (NOTRUNC): Define in terms of
__LIBGCC_*_EXCESS_PRECISION__, not LIBGCC2_LONG_DOUBLE_TYPE_SIZE.
* libgcc2.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Remove.
From-SVN: r215491
If the compiler inlines this function into kickoff, it may reuse
the TLS block address to load g. However, this is not necessarily
correct, as the call to g->entry in kickoff may cause the TLS
address to change. If the wrong value is loaded for g->status in
runtime_goexit, it may cause a runtime panic.
By marking the function as noinline we prevent the compiler from
reusing the TLS address.
From-SVN: r215484
* charset.c (conversion): Rename to ...
(cpp_conversion): ... this one; update.
* files.c (file_hash_entry): Rename to ...
(cpp_file_hash_entry): ... this one ; update.
From-SVN: r215482
2014-09-22 Richard Biener <rguenther@suse.de>
* gimplify.c (gimplify_init_constructor): Do not leave
non-GIMPLE vector constructors around.
* tree-cfg.c (verify_gimple_assign_single): Verify that
CONSTRUCTORs have gimple elements.
From-SVN: r215461
PR debug/63328
* omp-low.c (ipa_simd_modify_stmt_ops): For debug stmts
insert a debug source bind stmt setting DEBUG_EXPR_DECL
instead of a normal gimple assignment stmt.
* c-c++-common/gomp/pr63328.c: New test.
From-SVN: r215454
gcc/
* hard-reg-set.h: Include hash-table.h.
(target_hard_regs): Add a finalize method and a x_simplifiable_subregs
field.
* target-globals.c (target_globals::~target_globals): Call
hard_regs->finalize.
* rtl.h (subreg_shape): New structure.
(shape_of_subreg): New function.
(simplifiable_subregs): Declare.
* reginfo.c (simplifiable_subreg): New structure.
(simplifiable_subregs_hasher): Likewise.
(simplifiable_subregs): New function.
(invalid_mode_changes): Delete.
(alid_mode_changes, valid_mode_changes_obstack): New variables.
(record_subregs_of_mode): Remove subregs_of_mode parameter.
Record valid mode changes in valid_mode_changes.
(find_subregs_of_mode): Remove subregs_of_mode parameter.
Update calls to record_subregs_of_mode.
(init_subregs_of_mode): Remove invalid_mode_changes and bitmap
handling. Initialize new variables. Update call to
find_subregs_of_mode.
(invalid_mode_change_p): Check new variables instead of
invalid_mode_changes.
(finish_subregs_of_mode): Finalize new variables instead of
invalid_mode_changes.
(target_hard_regs::finalize): New function.
* ira-costs.c (print_allocno_costs): Call invalid_mode_change_p
even when CLASS_CANNOT_CHANGE_MODE is undefined.
From-SVN: r215449
* hard-reg-set.h (COPY_HARD_REG_SET, COMPL_HARD_REG_SET)
(AND_HARD_REG_SET, AND_COMPL_HARD_REG_SET, IOR_HARD_REG_SET)
(IOR_COMPL_HARD_REG_SET): Allow the "from" set to be constant.
From-SVN: r215446
* configure.ac (target_header_dir): Move block defining
this to before the block setting inhibit_libc.
(inhibit_libc): When considering $with_headers, just
check it it's explicitly "no". If not, also check if
$target_header_dir/stdio.h is present. If not, set
inhibit_libc=true.
* configure: Regenerate.
From-SVN: r215439
2014-09-21 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md (div<mode>3): Fix comment. Use a different
insn for divides by integer powers of two.
(div<mode>3_sra, *div<mode>3_sra_dot, *div<mode>3_sra_dot2): New.
(mod<mode>3): Fix formatting.
(three anonymous define_insn and two define_split): Delete.
From-SVN: r215437
2014-09-21 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md (strlensi): Don't use subsi3 with a
constant, use addsi3 directly.
(three anonymous define_insn, two define_split): Delete.
(sub<mode>3): Move. Do not allow constant second operand.
Generate different insn for constant first operand.
(*subf<mode>3, *subf<mode>3_dot, *subf<mode>3_dot2): New.
(subf<mode>3_imm): New.
(ctz<mode>2, ffs<mode>2): Clobber CA_REGNO where required.
(*plus_ltu<mode>): Only handle registers.
(*plus_ltu<mode>_1): New. Handle integer third operand.
(*plus_gtu<mode>): Only handle registers.
(*plus_gtu<mode>_1): New. Handle integer third operand.
From-SVN: r215434
2014-09-21 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/predicates.md (ca_operand): Allow subregs.
(input_operand): Do not allow ca_operand.
* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): For the
carry bit, allow SImode and Pmode.
(rs6000_init_hard_regno_mode_ok): Make the carry bit class NO_REGS.
From-SVN: r215429
Alexander Ivchenko
Joseph Myers
GCC Administrator
Ian Lance Taylor
Jan Hubicka
Jason Merrill
Paolo Carlini
Alan Lawrence
James Greenhalgh
Jonathan Wakely
Peter A. Bigot
Jonathan Wakely
Tom de Vries
Richard Biener
Jakub Jelinek
Dominique d'Humieres
Martin Liska
Richard Sandiford
Eric Botcazou
Zhenqiang Chen
Hans-Peter Nilsson
Patrick Oppenlander
Segher Boessenkool