linux/arch/arm/mach-omap2
Pali Rohár d1f1ca36b5 ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs
attribute if value is higher than max_current specified in board file. By default
global C variables are zero, so changing always failed. This patch adding missing
max_current and setting it to max safe value 100 (10 mA).

It is unclear which commit exactly caused this regression as the lp5523
driver was broken and was hiding the platform data breakage. Now
the driver is fixed so this should be fixed as well.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Joerg Reisenweber <joerg@openmoko.org>
[tony@atomide.com: updated comments to describe regression]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08 11:22:43 -07:00
..
include/mach ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S 2013-01-11 11:24:20 -08:00
Kconfig ARM: SoC platform changes for 3.12 2013-09-06 13:30:06 -07:00
Makefile ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data 2013-08-23 04:29:13 -06:00
Makefile.boot ARM: dtb: move all dtb targets to common Makefile 2012-09-20 22:58:17 -07:00
am33xx-restart.c ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards 2013-08-21 01:01:30 -07:00
am33xx.h ARM: OMAP2+: AM43x: early init 2013-06-12 08:00:35 -07:00
am35xx-emac.c ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default 2013-02-12 09:00:33 -08:00
am35xx-emac.h ARM: OMAP: move generic EMAC init to separate file 2012-03-05 11:08:36 -08:00
am35xx.h ARM: OMAP2+: Make am35xx.h local 2012-09-20 15:02:23 -07:00
board-2430sdp.c ARM: OMAP: 2430SDP: use new display drivers 2013-08-28 10:23:20 +03:00
board-3430sdp.c ARM: OMAP: 3430SDP: use new display drivers 2013-08-28 10:23:21 +03:00
board-3630sdp.c ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes 2013-04-02 09:59:54 -07:00
board-am3517crane.c ARM: OMAP2: remove useless variable 'ret' 2013-08-22 00:15:17 -07:00
board-am3517evm.c ARM: SoC cleanups for 3.12 2013-09-06 13:21:16 -07:00
board-cm-t35.c ARM: OMAP: cm-t35: use new display drivers 2013-08-28 10:23:21 +03:00
board-cm-t3517.c Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>: 2013-04-08 19:30:48 +02:00
board-devkit8000.c ARM: OMAP: devkit8000: use new display drivers 2013-08-28 10:23:20 +03:00
board-flash.c ARM: OMAP2+: nand: reorganize gpmc timing values 2013-05-16 08:49:02 -07:00
board-flash.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
board-generic.c ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree 2013-10-08 10:32:24 -07:00
board-h4.c ARM: OMAP: H4: use new display drivers 2013-08-28 10:23:21 +03:00
board-igep0020.c ARM: OMAP: igep0020: use new display drivers 2013-08-28 10:23:21 +03:00
board-ldp.c ARM: OMAP: LDP: use new display drivers 2013-08-28 10:23:20 +03:00
board-n8x0.c ARM: OMAP2: fix musb usage for n8x0 2013-08-16 09:39:56 -07:00
board-omap3beagle.c OMAP specific fbdev changes for 3.12: 2013-09-05 09:44:03 -07:00
board-omap3evm.c OMAP specific fbdev changes for 3.12: 2013-09-05 09:44:03 -07:00
board-omap3logic.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-omap3pandora.c OMAP specific fbdev changes for 3.12: 2013-09-05 09:44:03 -07:00
board-omap3stalker.c ARM: OMAP: omap3stalker: use new display drivers 2013-08-28 10:23:20 +03:00
board-omap3touchbook.c ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes 2013-04-02 10:00:01 -07:00
board-overo.c ARM: OMAP: overo: use new display drivers 2013-08-28 10:23:19 +03:00
board-rm680.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-rx51-peripherals.c ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config 2013-10-08 11:22:43 -07:00
board-rx51-video.c ARM: OMAP: rx51: use new display drivers 2013-08-28 10:23:19 +03:00
board-rx51.c ARM: OMAP: rx51: change musb mode to OTG 2013-08-16 09:40:01 -07:00
board-rx51.h ARM: OMAP2+: Make board-rx51.h local 2012-09-20 15:02:27 -07:00
board-ti8168evm.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-zoom-debugboard.c ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
board-zoom-display.c ARM: OMAP: Zoom: use new display drivers 2013-08-28 10:23:22 +03:00
board-zoom-peripherals.c ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight 2013-04-08 14:01:04 -07:00
board-zoom.c ARM: OMAP: zoom: Adapt to ehci-omap changes 2013-04-02 10:00:02 -07:00
board-zoom.h ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
cclock3xxx_data.c ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies 2013-06-09 01:05:34 -06:00
cclock33xx_data.c ARM: OMAP: AM33xx: clock: Add RNG clock data 2013-08-23 12:38:07 -06:00
cclock44xx_data.c ARM: OMAP4: Fix clock_get error for GPMC during boot 2013-09-18 12:01:58 -07:00
cclock2420_data.c ARM: OMAP2+: clock data: Remove CK_* flags 2013-03-18 09:57:39 -06:00
cclock2430_data.c ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod 2013-03-30 15:51:33 -06:00
clkt2xxx_apll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt2xxx_osc.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_sys.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_virt_prcm_set.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt34xx_dpll3m2.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt_clksel.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_dpll.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_iclk.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.c Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm 2013-05-03 09:13:19 -07:00
clock.h ARM: OMAP2+: clock data: Remove CK_* flags 2013-03-18 09:57:39 -06:00
clock2xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
clock2xxx.h ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
clock3xxx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.h
clock36xx.c ARM: omap3: clock: fix wrong container_of in clock36xx.c 2013-06-06 08:48:07 -06:00
clock36xx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock44xx.h ARM: OMAP4: clock: round_rate and recalc functions for DPLL_ABE 2011-10-07 00:52:58 -06:00
clock2430.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3517.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3517.h
clock_common_data.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clockdomain.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
clockdomain.h ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header 2013-08-23 04:28:36 -06:00
clockdomains2xxx_3xxx_data.c ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer 2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains7xx_data.c ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header 2013-08-23 04:28:36 -06:00
clockdomains33xx_data.c ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations 2012-06-18 12:08:06 -06:00
clockdomains44xx_data.c ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP 2012-10-29 22:02:13 -06:00
clockdomains54xx_data.c ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header 2013-06-08 11:56:15 -06:00
clockdomains2420_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2430_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
cm-regbits-7xx.h ARM: OMAP: DRA7: CM: Add minimal regbit shifts 2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h ARM: OMAP2: PRM/CM: Cleanup unused header 2013-07-21 21:13:59 -06:00
cm-regbits-33xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
cm-regbits-44xx.h ARM: OMAP4: PRM/CM: Cleanup unused header 2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h ARM: OMAP5: PRM/CM: Cleanup unused header 2013-07-21 22:10:25 -06:00
cm.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
cm1_7xx.h ARM: OMAP: DRA7: CM: Add DRA7XX register defines 2013-08-23 04:24:15 -06:00
cm1_44xx.h ARM: OMAP4+: CM: Move function prototypes to common header for re-use 2013-06-08 11:41:39 -06:00
cm1_54xx.h ARM: OMAP5: CM: Add OMAP54XX register and bitfield files 2013-06-08 11:46:09 -06:00
cm2_7xx.h ARM: OMAP: DRA7: CM: Add DRA7XX register defines 2013-08-23 04:24:15 -06:00
cm2_44xx.h ARM: OMAP4+: CM: Move function prototypes to common header for re-use 2013-06-08 11:41:39 -06:00
cm2_54xx.h ARM: OMAP5: CM: Add OMAP54XX register and bitfield files 2013-06-08 11:46:09 -06:00
cm2xxx.c ARM: OMAP2xxx: CM: remove autodep handling 2013-01-29 14:59:57 -07:00
cm2xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm3xxx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
cm3xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm33xx.c ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug 2013-02-08 08:21:13 -07:00
cm33xx.h ARM: OMAP2+: AM43x: kbuild 2013-06-12 07:55:32 -07:00
cm44xx.c ARM: OMAP2+: Move most of plat/io.h into local iomap.h 2012-02-24 10:34:35 -08:00
cm44xx.h OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros 2011-07-10 05:56:30 -06:00
cm_44xx_54xx.h ARM: OMAP4+: CM: Move function prototypes to common header for re-use 2013-06-08 11:41:39 -06:00
cm_common.c ARM: OMAP2: Fix compillation error in cm_common 2012-11-12 13:42:46 -08:00
cminst44xx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
cminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
common-board-devices.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
common-board-devices.h ARM: OMAP2+: nand: unify init functions 2012-10-15 12:00:44 +05:30
common.c ARM: OMAP2+: common: remove use of vram 2012-12-16 11:19:48 -08:00
common.h ARM: DRA7: Reuse io tables and add a new .init_early 2013-08-13 11:00:35 +05:30
control.c ARM: OMAP2+: control: add OMAP5 support for dsp boot programming 2013-05-16 08:46:28 -07:00
control.h ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature 2013-06-18 03:04:07 -07:00
cpuidle34xx.c ARM: arm-soc cleanup for 3.10 2013-05-02 09:03:55 -07:00
cpuidle44xx.c ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally 2013-09-18 12:02:00 -07:00
ctrl_module_core_44xx.h ARM: OMAP2+: Make ctrl_module_core_44xx.h local 2012-09-20 15:02:29 -07:00
ctrl_module_pad_core_44xx.h ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local 2012-09-20 15:02:30 -07:00
ctrl_module_pad_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local 2012-09-20 15:02:32 -07:00
ctrl_module_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local 2012-09-20 15:02:33 -07:00
devices.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2013-09-07 14:31:18 -07:00
devices.h
display.c OMAPDSS: fix DPI and SDI device ids 2013-08-29 16:21:51 +03:00
display.h ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader 2011-11-08 03:16:46 -07:00
dma.c dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver 2013-04-15 09:51:19 +05:30
dpll3xxx.c Merge branch 'for_3.10/omap5_generic_updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux into omap-for-v3.10/fixes-non-critical 2013-04-01 09:30:47 -07:00
dpll44xx.c ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
drm.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
dsp.c ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" 2013-04-01 08:52:50 -07:00
dss-common.c ARM: OMAP: 4430SDP: remove picodlp device data 2013-08-28 10:23:19 +03:00
dss-common.h ARM: OMAP2+: Remove legacy DSS initialization for omap4 2013-08-28 10:23:18 +03:00
emu.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
fb.c ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" 2013-07-04 05:10:51 -07:00
gpio.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
gpmc-nand.c ARM: dts: OMAP2+: Simplify NAND support 2013-05-16 09:21:19 -07:00
gpmc-nand.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-onenand.c ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT 2013-10-03 10:59:50 -07:00
gpmc-onenand.h ARM: OMAP2+: onenand: header cleanup 2012-10-15 14:42:03 +05:30
gpmc-smc91x.c ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings() 2013-04-01 14:53:43 -05:00
gpmc-smc91x.h ARM: OMAP2+: Make gpmc-smc91x.h local 2012-09-20 15:02:49 -07:00
gpmc-smsc911x.c ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-smsc911x.h ARM: OMAP2+: Make gpmc-smsc911x.h local 2012-09-20 15:03:55 -07:00
gpmc.c ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y 2013-09-18 12:01:59 -07:00
gpmc.h ARM: OMAP2+: Add function to read GPMC settings from device-tree 2013-04-01 14:53:45 -05:00
hdq1w.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
hdq1w.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
hsmmc.c ARM: OMAP2+: Remove omap4 pdata from hsmmc.c 2013-05-30 13:09:31 -07:00
hsmmc.h MMC highlights for 3.4: 2012-03-28 20:59:45 -07:00
hwspinlock.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
i2c.c PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. 2013-07-15 11:25:01 +09:30
i2c.h ARM: OMAP: Fix relative includes for shared i2c.h file 2012-10-31 15:37:13 -07:00
id.c ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' 2013-08-13 16:58:08 +05:30
id.h ARM: OMAP2+: Make id.h local 2012-09-20 15:02:22 -07:00
io.c ARM: OMAP: DRA7: Enable PM framework initializations 2013-08-23 04:29:37 -06:00
iomap.h ARM: OMAP5: Add minimal support for OMAP5430 SOC 2012-07-09 19:14:39 +05:30
irq.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
l3_2xxx.h ARM: OMAP2+: Make l3_2xxx.h local 2012-09-20 15:03:59 -07:00
l3_3xxx.h ARM: OMAP2+: Make l3_3xxx.h local 2012-09-20 15:04:00 -07:00
l4_2xxx.h ARM: OMAP2+: Make l4_2xxx.h local 2012-09-20 15:04:01 -07:00
l4_3xxx.h ARM: OMAP2+: Make l4_3xxx.h local 2012-09-20 15:04:03 -07:00
mcbsp.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
mmc.h ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
msdi.c ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code 2013-01-26 00:48:53 -07:00
mux.c ARM: OMAP2+: mux: correct wrong error messages 2013-03-04 11:37:31 -08:00
mux.h ARM: dts: Fix pinctrl mask for omap3 2013-10-08 10:37:29 -07:00
mux34xx.c ARM: OMAP2+: mux: fix trivial typo in name 2013-09-18 12:02:01 -07:00
mux34xx.h omap: mux: add AM/DM37x gpios 2013-05-08 17:07:40 -07:00
mux2420.c
mux2420.h
mux2430.c
mux2430.h Fix common misspellings 2011-03-31 11:26:23 -03:00
omap-headsmp.S arm: delete __cpuinit/__CPUINIT usage from all ARM users 2013-07-14 19:36:52 -04:00
omap-hotplug.c ARM: cpu hotplug: remove majority of cache flushing from platforms 2013-04-18 20:08:04 +01:00
omap-iommu.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
omap-mpuss-lowpower.c arm: delete __cpuinit/__CPUINIT usage from all ARM users 2013-07-14 19:36:52 -04:00
omap-pm-noop.c ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 2012-10-31 15:37:13 -07:00
omap-pm.h ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
omap-secure.c ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-secure.h ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-smc.S ARM: OMAP: Add Secure HAL and monitor mode API infrastructure. 2011-12-08 11:29:00 -08:00
omap-smp.c ARM: OMAP4 SMP: Corrected a typo fucntions to functions 2013-09-18 12:02:00 -07:00
omap-wakeupgen.c arm: delete __cpuinit/__CPUINIT usage from all ARM users 2013-07-14 19:36:52 -04:00
omap-wakeupgen.h ARM: OMAP2+: Make omap-wakeupgen.h local 2012-09-20 15:02:37 -07:00
omap2-restart.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap3-restart.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap4-common.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap4-keypad.h ARM: OMAP2+: Make omap4-keypad.h local 2012-09-20 15:04:04 -07:00
omap4-restart.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap4-sar-layout.h ARM: arm-soc cleanup for 3.10 2013-05-02 09:03:55 -07:00
omap24xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap34xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap44xx.h ARM: OMAP: Make use of available scu_a9_get_base() interface 2013-01-28 10:41:39 -07:00
omap54xx.h ARM: DRA7: Reuse io tables and add a new .init_early 2013-08-13 11:00:35 +05:30
omap_device.c ARM: OMAP: fix return value check in omap_device_build_from_dt() 2013-09-18 12:01:58 -07:00
omap_device.h arm: omap2+: omap_device: remove no_idle_on_suspend 2013-05-16 07:09:09 -07:00
omap_hwmod.c Add basic support for devices on dra7xx by adding the PRCM and hwmod 2013-08-29 16:46:14 -07:00
omap_hwmod.h ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data 2013-08-23 04:29:13 -06:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: OMAP2+: Remove dma.h 2013-06-18 00:12:34 -07:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod 2013-03-30 15:51:33 -06:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL 2013-07-30 05:13:35 -06:00
omap_hwmod_3xxx_data.c ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL 2013-07-30 05:13:35 -06:00
omap_hwmod_7xx_data.c ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data 2013-08-23 04:29:13 -06:00
omap_hwmod_33xx_data.c ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS 2013-08-23 04:44:09 -06:00
omap_hwmod_44xx_data.c ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL 2013-07-30 05:13:35 -06:00
omap_hwmod_54xx_data.c ARM: SoC late changes for v3.12 2013-09-09 16:35:29 -07:00
omap_hwmod_2420_data.c ARM: OMAP2+: add user and fifo info to mailbox platform data 2013-06-11 11:41:30 -05:00
omap_hwmod_2430_data.c ARM: OMAP2+: add user and fifo info to mailbox platform data 2013-06-11 11:41:30 -05:00
omap_hwmod_common_data.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod 2013-03-30 15:51:33 -06:00
omap_hwmod_reset.c ARM: omap2: include linux/errno.h in hwmod_reset 2013-02-15 13:36:47 +01:00
omap_opp_data.h Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
omap_phy_internal.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
omap_twl.c ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER 2012-12-17 10:50:41 -08:00
opp.c ARM: OMAP: Make omap_device local to mach-omap2 2012-10-17 12:08:40 -07:00
opp2xxx.h ARM: OMAP: am33xx: Update common omap platform files 2011-12-13 10:46:43 -08:00
opp3xxx_data.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
opp4xxx_data.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
opp2420_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp2430_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
pm-debug.c Merge branch 'cleanup' into for-linus 2013-05-02 21:31:29 +01:00
pm.c Power management and ACPI updates for 3.10-rc1 2013-04-30 15:21:02 -07:00
pm.h ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code 2013-01-29 14:59:57 -07:00
pm24xx.c ARM: OMAP2+: PM: Remove bogus fiq_[enable/disable] tuple 2013-03-28 12:55:58 +05:30
pm34xx.c ARM: OMAP3: Fix iva2_pwrdm settings for 3703 2013-05-30 12:44:47 -07:00
pm44xx.c OMAP PM cleanups for v3.10 2013-05-16 08:27:49 -07:00
pmu.c ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" 2013-07-04 05:10:51 -07:00
powerdomain-common.c ARM: OMAP2+: Fix build issues with missing include of linux/bug.h 2012-03-07 17:29:34 -08:00
powerdomain.c ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm 2013-06-17 07:25:14 -07:00
powerdomain.h ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header 2013-08-23 04:28:36 -06:00
powerdomains2xxx_3xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains3xxx_data.c ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX 2013-08-23 04:48:42 -06:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header 2013-08-23 04:28:36 -06:00
powerdomains33xx_data.c ARM: OMAP AM33xx: powerdomains: add AM335x support 2012-06-18 12:08:06 -06:00
powerdomains44xx_data.c OMAP4: powerdomain data: add voltage domains 2011-09-15 11:39:10 -07:00
powerdomains54xx_data.c ARM: OMAP5: PRM/CM: Cleanup unused header 2013-07-21 22:10:25 -06:00
prcm-common.h ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX 2013-08-23 04:48:42 -06:00
prcm44xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm_mpu44xx.h ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use 2013-06-08 11:54:40 -06:00
prcm_mpu54xx.h ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers 2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use 2013-06-08 11:54:40 -06:00
prm-regbits-24xx.h ARM: OMAP2: PRM/CM: Cleanup unused header 2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK 2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
prm-regbits-44xx.h ARM: OMAP4: PRM/CM: Cleanup unused header 2013-07-21 22:10:14 -06:00
prm.h ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count 2012-11-21 16:15:17 -07:00
prm2xxx.c Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test 2013-01-03 11:04:21 -08:00
prm2xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
prm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm3xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
prm3xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm7xx.h ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions 2013-08-23 04:04:23 -06:00
prm33xx.c ARM: AM33xx: Remove the unused voltagedomain data 2013-06-17 07:26:44 -07:00
prm33xx.h ARM: OMAP2+: AM33XX: Update the hardreset API 2013-02-08 07:25:28 -07:00
prm44xx.c ARM: OMAP: DRA7: Enable PM framework initializations 2013-08-23 04:29:37 -06:00
prm44xx.h ARM: OMAP4+: PRM: Move function prototypes to common header for re-use 2013-06-08 11:02:20 -06:00
prm44xx_54xx.h ARM: OMAP4+: PRM: Move function prototypes to common header for re-use 2013-06-08 11:02:20 -06:00
prm54xx.h ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files 2013-06-08 11:41:01 -06:00
prm_common.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
prminst44xx.c ARM: OMAP: DRA7: Reuse the omap44xx_restart and fix the device instance 2013-08-23 04:28:36 -06:00
prminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
scrm44xx.h ARM: OMAP4: clock: Add 44xx data using common struct clk 2012-11-12 19:10:20 -07:00
scrm54xx.h ARM: OMAP5: SCRM: Add OMAP54XX header file. 2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-nokia.c ARM: OMAP: remove plat/clock.h 2012-10-18 16:23:20 -07:00
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdrc.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
sdrc2xxx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
serial.c ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL 2013-07-30 05:13:35 -06:00
serial.h ARM: OMAP2+: Fix relative includes for serial.h 2012-10-31 15:37:14 -07:00
sleep24xx.S ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active 2013-02-06 13:48:14 -07:00
sleep34xx.S omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sleep44xx.S ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4 2013-07-04 05:10:51 -07:00
smartreflex-class3.c PM / AVS: SmartReflex: use omap_sr * for enable/disable interface 2013-06-10 10:46:18 -07:00
soc.h ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' 2013-08-13 16:58:08 +05:30
sr_device.c ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default 2013-02-12 09:00:33 -08:00
sram.c ARM: OMAP2+: AM43x: SRAM base and size 2013-06-12 08:07:23 -07:00
sram.h ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
sram34xx.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram242x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram243x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
ti81xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
timer.c ARM: mach-omap2: board-generic: fix undefined symbol 2013-10-08 10:40:36 -07:00
twl-common.c ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0 2013-06-12 06:59:40 -07:00
twl-common.h ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup 2013-01-22 10:34:50 +01:00
usb-host.c usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv 2013-08-09 17:26:00 +03:00
usb-musb.c ARM: OMAP2: fix musb usage for n8x0 2013-08-16 09:39:56 -07:00
usb-tusb6010.c ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings() 2013-04-01 14:53:43 -05:00
usb.h ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys() 2013-04-02 09:59:52 -07:00
vc.c Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm 2012-11-30 09:12:33 -08:00
vc.h ARM: OMAP3: VC: calculate ramp times 2012-11-05 15:08:23 -08:00
vc3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltage.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
voltage.h Merge branch 'omap/pm-voltdomain-cleanup' into next/soc 2013-06-20 17:35:16 +02:00
voltagedomains2xxx_data.c OMAP2: add voltage domains and connect to powerdomains 2011-09-15 11:39:10 -07:00
voltagedomains3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltagedomains44xx_data.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
voltagedomains54xx_data.c ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data 2013-06-25 17:11:06 -07:00
vp.c OMAP voltage layer updates towards supporting auto-retention/auto-off 2012-11-06 17:06:37 -08:00
vp.h ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
wd_timer.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
wd_timer.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00