qemu-e2k/hw/pci-host/piix.c

781 lines
24 KiB
C
Raw Normal View History

/*
* QEMU i440FX/PIIX3 PCI Bridge Emulation
*
* Copyright (c) 2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw/hw.h"
#include "hw/i386/pc.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_host.h"
#include "hw/isa/isa.h"
#include "hw/sysbus.h"
#include "qemu/range.h"
#include "hw/xen/xen.h"
#include "hw/pci-host/pam.h"
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
#include "sysemu/sysemu.h"
#include "hw/i386/ioapic.h"
#include "qapi/visitor.h"
/*
* I440FX chipset data sheet.
* http://download.intel.com/design/chipsets/datashts/29054901.pdf
*/
#define TYPE_I440FX_PCI_HOST_BRIDGE "i440FX-pcihost"
#define I440FX_PCI_HOST_BRIDGE(obj) \
OBJECT_CHECK(I440FXState, (obj), TYPE_I440FX_PCI_HOST_BRIDGE)
typedef struct I440FXState {
PCIHostState parent_obj;
PcPciInfo pci_info;
uint64_t pci_hole64_size;
uint32_t short_root_bus;
} I440FXState;
#define PIIX_NUM_PIC_IRQS 16 /* i8259 * 2 */
#define PIIX_NUM_PIRQS 4ULL /* PIRQ[A-D] */
#define XEN_PIIX_NUM_PIRQS 128ULL
#define PIIX_PIRQC 0x60
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
/*
* Reset Control Register: PCI-accessible ISA-Compatible Register at address
* 0xcf9, provided by the PCI/ISA bridge (PIIX3 PCI function 0, 8086:7000).
*/
#define RCR_IOPORT 0xcf9
typedef struct PIIX3State {
PCIDevice dev;
/*
* bitmap to track pic levels.
* The pic level is the logical OR of all the PCI irqs mapped to it
* So one PIC level is tracked by PIIX_NUM_PIRQS bits.
*
* PIRQ is mapped to PIC pins, we track it by
* PIIX_NUM_PIRQS * PIIX_NUM_PIC_IRQS = 64 bits with
* pic_irq * PIIX_NUM_PIRQS + pirq
*/
#if PIIX_NUM_PIC_IRQS * PIIX_NUM_PIRQS > 64
#error "unable to encode pic state in 64bit in pic_levels."
#endif
uint64_t pic_levels;
qemu_irq *pic;
/* This member isn't used. Just for save/load compatibility */
int32_t pci_irq_levels_vmstate[PIIX_NUM_PIRQS];
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
/* Reset Control Register contents */
uint8_t rcr;
/* IO memory region for Reset Control Register (RCR_IOPORT) */
MemoryRegion rcr_mem;
} PIIX3State;
#define TYPE_I440FX_PCI_DEVICE "i440FX"
#define I440FX_PCI_DEVICE(obj) \
OBJECT_CHECK(PCII440FXState, (obj), TYPE_I440FX_PCI_DEVICE)
struct PCII440FXState {
/*< private >*/
PCIDevice parent_obj;
/*< public >*/
MemoryRegion *system_memory;
MemoryRegion *pci_address_space;
MemoryRegion *ram_memory;
PAMMemoryRegion pam_regions[13];
MemoryRegion smram_region;
MemoryRegion smram, low_smram;
};
#define I440FX_PAM 0x59
#define I440FX_PAM_SIZE 7
#define I440FX_SMRAM 0x72
static void piix3_set_irq(void *opaque, int pirq, int level);
static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pci_intx);
static void piix3_write_config_xen(PCIDevice *dev,
uint32_t address, uint32_t val, int len);
/* return the global irq number corresponding to a given device irq
pin. We could also use the bus number to have a more precise
mapping. */
static int pci_slot_get_pirq(PCIDevice *pci_dev, int pci_intx)
{
int slot_addend;
slot_addend = (pci_dev->devfn >> 3) - 1;
return (pci_intx + slot_addend) & 3;
}
static void i440fx_update_memory_mappings(PCII440FXState *d)
{
int i;
PCIDevice *pd = PCI_DEVICE(d);
memory_region_transaction_begin();
for (i = 0; i < 13; i++) {
pam_update(&d->pam_regions[i], i,
pd->config[I440FX_PAM + ((i + 1) / 2)]);
}
memory_region_set_enabled(&d->smram_region,
!(pd->config[I440FX_SMRAM] & SMRAM_D_OPEN));
memory_region_set_enabled(&d->smram,
pd->config[I440FX_SMRAM] & SMRAM_G_SMRAME);
memory_region_transaction_commit();
}
static void i440fx_write_config(PCIDevice *dev,
uint32_t address, uint32_t val, int len)
{
PCII440FXState *d = I440FX_PCI_DEVICE(dev);
/* XXX: implement SMRAM.D_LOCK */
pci_default_write_config(dev, address, val, len);
if (ranges_overlap(address, len, I440FX_PAM, I440FX_PAM_SIZE) ||
range_covers_byte(address, len, I440FX_SMRAM)) {
i440fx_update_memory_mappings(d);
}
}
static int i440fx_load_old(QEMUFile* f, void *opaque, int version_id)
{
PCII440FXState *d = opaque;
PCIDevice *pd = PCI_DEVICE(d);
int ret, i;
uint8_t smm_enabled;
ret = pci_device_load(pd, f);
if (ret < 0)
return ret;
i440fx_update_memory_mappings(d);
qemu_get_8s(f, &smm_enabled);
if (version_id == 2) {
for (i = 0; i < PIIX_NUM_PIRQS; i++) {
qemu_get_be32(f); /* dummy load for compatibility */
}
}
return 0;
}
static int i440fx_post_load(void *opaque, int version_id)
{
PCII440FXState *d = opaque;
i440fx_update_memory_mappings(d);
return 0;
}
static const VMStateDescription vmstate_i440fx = {
.name = "I440FX",
.version_id = 3,
.minimum_version_id = 3,
.minimum_version_id_old = 1,
.load_state_old = i440fx_load_old,
.post_load = i440fx_post_load,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(parent_obj, PCII440FXState),
/* Used to be smm_enabled, which was basically always zero because
* SeaBIOS hardly uses SMM. SMRAM is now handled by CPU code.
*/
VMSTATE_UNUSED(1),
VMSTATE_END_OF_LIST()
}
};
static void i440fx_pcihost_get_pci_hole_start(Object *obj, Visitor *v,
void *opaque, const char *name,
Error **errp)
{
I440FXState *s = I440FX_PCI_HOST_BRIDGE(obj);
uint32_t value = s->pci_info.w32.begin;
visit_type_uint32(v, &value, name, errp);
}
static void i440fx_pcihost_get_pci_hole_end(Object *obj, Visitor *v,
void *opaque, const char *name,
Error **errp)
{
I440FXState *s = I440FX_PCI_HOST_BRIDGE(obj);
uint32_t value = s->pci_info.w32.end;
visit_type_uint32(v, &value, name, errp);
}
static void i440fx_pcihost_get_pci_hole64_start(Object *obj, Visitor *v,
void *opaque, const char *name,
Error **errp)
{
PCIHostState *h = PCI_HOST_BRIDGE(obj);
Range w64;
pci_bus_get_w64_range(h->bus, &w64);
visit_type_uint64(v, &w64.begin, name, errp);
}
static void i440fx_pcihost_get_pci_hole64_end(Object *obj, Visitor *v,
void *opaque, const char *name,
Error **errp)
{
PCIHostState *h = PCI_HOST_BRIDGE(obj);
Range w64;
pci_bus_get_w64_range(h->bus, &w64);
visit_type_uint64(v, &w64.end, name, errp);
}
static void i440fx_pcihost_initfn(Object *obj)
{
PCIHostState *s = PCI_HOST_BRIDGE(obj);
I440FXState *d = I440FX_PCI_HOST_BRIDGE(obj);
memory_region_init_io(&s->conf_mem, obj, &pci_host_conf_le_ops, s,
"pci-conf-idx", 4);
memory_region_init_io(&s->data_mem, obj, &pci_host_data_le_ops, s,
"pci-conf-data", 4);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_START, "int",
i440fx_pcihost_get_pci_hole_start,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_END, "int",
i440fx_pcihost_get_pci_hole_end,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_START, "int",
i440fx_pcihost_get_pci_hole64_start,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_END, "int",
i440fx_pcihost_get_pci_hole64_end,
NULL, NULL, NULL, NULL);
d->pci_info.w32.end = IO_APIC_DEFAULT_ADDRESS;
}
static void i440fx_pcihost_realize(DeviceState *dev, Error **errp)
{
PCIHostState *s = PCI_HOST_BRIDGE(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
sysbus_add_io(sbd, 0xcf8, &s->conf_mem);
sysbus_init_ioports(sbd, 0xcf8, 4);
sysbus_add_io(sbd, 0xcfc, &s->data_mem);
sysbus_init_ioports(sbd, 0xcfc, 4);
}
static void i440fx_realize(PCIDevice *dev, Error **errp)
{
dev->config[I440FX_SMRAM] = 0x02;
}
PCIBus *i440fx_init(PCII440FXState **pi440fx_state,
int *piix3_devfn,
ISABus **isa_bus, qemu_irq *pic,
MemoryRegion *address_space_mem,
MemoryRegion *address_space_io,
ram_addr_t ram_size,
ram_addr_t below_4g_mem_size,
ram_addr_t above_4g_mem_size,
MemoryRegion *pci_address_space,
MemoryRegion *ram_memory)
{
DeviceState *dev;
PCIBus *b;
PCIDevice *d;
PCIHostState *s;
PIIX3State *piix3;
PCII440FXState *f;
unsigned i;
I440FXState *i440fx;
dev = qdev_create(NULL, TYPE_I440FX_PCI_HOST_BRIDGE);
s = PCI_HOST_BRIDGE(dev);
b = pci_bus_new(dev, NULL, pci_address_space,
address_space_io, 0, TYPE_PCI_BUS);
s->bus = b;
object_property_add_child(qdev_get_machine(), "i440fx", OBJECT(dev), NULL);
qdev_init_nofail(dev);
d = pci_create_simple(b, 0, TYPE_I440FX_PCI_DEVICE);
*pi440fx_state = I440FX_PCI_DEVICE(d);
f = *pi440fx_state;
f->system_memory = address_space_mem;
f->pci_address_space = pci_address_space;
f->ram_memory = ram_memory;
i440fx = I440FX_PCI_HOST_BRIDGE(dev);
i440fx->pci_info.w32.begin = below_4g_mem_size;
/* setup pci memory mapping */
pc_pci_as_mapping_init(OBJECT(f), f->system_memory,
f->pci_address_space);
/* if *disabled* show SMRAM to all CPUs */
memory_region_init_alias(&f->smram_region, OBJECT(d), "smram-region",
f->pci_address_space, 0xa0000, 0x20000);
memory_region_add_subregion_overlap(f->system_memory, 0xa0000,
&f->smram_region, 1);
memory_region_set_enabled(&f->smram_region, true);
/* smram, as seen by SMM CPUs */
memory_region_init(&f->smram, OBJECT(d), "smram", 1ull << 32);
memory_region_set_enabled(&f->smram, true);
memory_region_init_alias(&f->low_smram, OBJECT(d), "smram-low",
f->ram_memory, 0xa0000, 0x20000);
memory_region_set_enabled(&f->low_smram, true);
memory_region_add_subregion(&f->smram, 0xa0000, &f->low_smram);
object_property_add_const_link(qdev_get_machine(), "smram",
OBJECT(&f->smram), &error_abort);
init_pam(dev, f->ram_memory, f->system_memory, f->pci_address_space,
&f->pam_regions[0], PAM_BIOS_BASE, PAM_BIOS_SIZE);
for (i = 0; i < 12; ++i) {
init_pam(dev, f->ram_memory, f->system_memory, f->pci_address_space,
&f->pam_regions[i+1], PAM_EXPAN_BASE + i * PAM_EXPAN_SIZE,
PAM_EXPAN_SIZE);
}
/* Xen supports additional interrupt routes from the PCI devices to
* the IOAPIC: the four pins of each PCI device on the bus are also
* connected to the IOAPIC directly.
* These additional routes can be discovered through ACPI. */
if (xen_enabled()) {
piix3 = DO_UPCAST(PIIX3State, dev,
pci_create_simple_multifunction(b, -1, true, "PIIX3-xen"));
pci_bus_irqs(b, xen_piix3_set_irq, xen_pci_slot_get_pirq,
piix3, XEN_PIIX_NUM_PIRQS);
} else {
piix3 = DO_UPCAST(PIIX3State, dev,
pci_create_simple_multifunction(b, -1, true, "PIIX3"));
pci_bus_irqs(b, piix3_set_irq, pci_slot_get_pirq, piix3,
PIIX_NUM_PIRQS);
pci_bus_set_route_irq_fn(b, piix3_route_intx_pin_to_irq);
}
piix3->pic = pic;
*isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
*piix3_devfn = piix3->dev.devfn;
ram_size = ram_size / 8 / 1024 / 1024;
if (ram_size > 255) {
ram_size = 255;
}
d->config[0x57] = ram_size;
i440fx_update_memory_mappings(f);
return b;
}
PCIBus *find_i440fx(void)
{
PCIHostState *s = OBJECT_CHECK(PCIHostState,
object_resolve_path("/machine/i440fx", NULL),
TYPE_PCI_HOST_BRIDGE);
return s ? s->bus : NULL;
}
/* PIIX3 PCI to ISA bridge */
static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
{
qemu_set_irq(piix3->pic[pic_irq],
!!(piix3->pic_levels &
(((1ULL << PIIX_NUM_PIRQS) - 1) <<
(pic_irq * PIIX_NUM_PIRQS))));
}
static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level)
{
int pic_irq;
uint64_t mask;
pic_irq = piix3->dev.config[PIIX_PIRQC + pirq];
if (pic_irq >= PIIX_NUM_PIC_IRQS) {
return;
}
mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
piix3->pic_levels &= ~mask;
piix3->pic_levels |= mask * !!level;
}
static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level)
{
int pic_irq;
pic_irq = piix3->dev.config[PIIX_PIRQC + pirq];
if (pic_irq >= PIIX_NUM_PIC_IRQS) {
return;
}
piix3_set_irq_level_internal(piix3, pirq, level);
piix3_set_irq_pic(piix3, pic_irq);
}
static void piix3_set_irq(void *opaque, int pirq, int level)
{
PIIX3State *piix3 = opaque;
piix3_set_irq_level(piix3, pirq, level);
}
static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
{
PIIX3State *piix3 = opaque;
int irq = piix3->dev.config[PIIX_PIRQC + pin];
PCIINTxRoute route;
if (irq < PIIX_NUM_PIC_IRQS) {
route.mode = PCI_INTX_ENABLED;
route.irq = irq;
} else {
route.mode = PCI_INTX_DISABLED;
route.irq = -1;
}
return route;
}
/* irq routing is changed. so rebuild bitmap */
static void piix3_update_irq_levels(PIIX3State *piix3)
{
int pirq;
piix3->pic_levels = 0;
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
piix3_set_irq_level(piix3, pirq,
pci_bus_get_irq_level(piix3->dev.bus, pirq));
}
}
static void piix3_write_config(PCIDevice *dev,
uint32_t address, uint32_t val, int len)
{
pci_default_write_config(dev, address, val, len);
if (ranges_overlap(address, len, PIIX_PIRQC, 4)) {
PIIX3State *piix3 = DO_UPCAST(PIIX3State, dev, dev);
int pic_irq;
pci_bus_fire_intx_routing_notifier(piix3->dev.bus);
piix3_update_irq_levels(piix3);
for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) {
piix3_set_irq_pic(piix3, pic_irq);
}
}
}
static void piix3_write_config_xen(PCIDevice *dev,
uint32_t address, uint32_t val, int len)
{
xen_piix_pci_write_config_client(address, val, len);
piix3_write_config(dev, address, val, len);
}
static void piix3_reset(void *opaque)
{
PIIX3State *d = opaque;
uint8_t *pci_conf = d->dev.config;
pci_conf[0x04] = 0x07; /* master, memory and I/O */
pci_conf[0x05] = 0x00;
pci_conf[0x06] = 0x00;
pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */
pci_conf[0x4c] = 0x4d;
pci_conf[0x4e] = 0x03;
pci_conf[0x4f] = 0x00;
pci_conf[0x60] = 0x80;
pci_conf[0x61] = 0x80;
pci_conf[0x62] = 0x80;
pci_conf[0x63] = 0x80;
pci_conf[0x69] = 0x02;
pci_conf[0x70] = 0x80;
pci_conf[0x76] = 0x0c;
pci_conf[0x77] = 0x0c;
pci_conf[0x78] = 0x02;
pci_conf[0x79] = 0x00;
pci_conf[0x80] = 0x00;
pci_conf[0x82] = 0x00;
pci_conf[0xa0] = 0x08;
pci_conf[0xa2] = 0x00;
pci_conf[0xa3] = 0x00;
pci_conf[0xa4] = 0x00;
pci_conf[0xa5] = 0x00;
pci_conf[0xa6] = 0x00;
pci_conf[0xa7] = 0x00;
pci_conf[0xa8] = 0x0f;
pci_conf[0xaa] = 0x00;
pci_conf[0xab] = 0x00;
pci_conf[0xac] = 0x00;
pci_conf[0xae] = 0x00;
d->pic_levels = 0;
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
d->rcr = 0;
}
static int piix3_post_load(void *opaque, int version_id)
{
PIIX3State *piix3 = opaque;
int pirq;
/* Because the i8259 has not been deserialized yet, qemu_irq_raise
* might bring the system to a different state than the saved one;
* for example, the interrupt could be masked but the i8259 would
* not know that yet and would trigger an interrupt in the CPU.
*
* Here, we update irq levels without raising the interrupt.
* Interrupt state will be deserialized separately through the i8259.
*/
piix3->pic_levels = 0;
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
piix3_set_irq_level_internal(piix3, pirq,
pci_bus_get_irq_level(piix3->dev.bus, pirq));
}
return 0;
}
static void piix3_pre_save(void *opaque)
{
int i;
PIIX3State *piix3 = opaque;
for (i = 0; i < ARRAY_SIZE(piix3->pci_irq_levels_vmstate); i++) {
piix3->pci_irq_levels_vmstate[i] =
pci_bus_get_irq_level(piix3->dev.bus, i);
}
}
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
static bool piix3_rcr_needed(void *opaque)
{
PIIX3State *piix3 = opaque;
return (piix3->rcr != 0);
}
static const VMStateDescription vmstate_piix3_rcr = {
.name = "PIIX3/rcr",
.version_id = 1,
.minimum_version_id = 1,
.needed = piix3_rcr_needed,
.fields = (VMStateField[]) {
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
VMSTATE_UINT8(rcr, PIIX3State),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_piix3 = {
.name = "PIIX3",
.version_id = 3,
.minimum_version_id = 2,
.post_load = piix3_post_load,
.pre_save = piix3_pre_save,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(dev, PIIX3State),
VMSTATE_INT32_ARRAY_V(pci_irq_levels_vmstate, PIIX3State,
PIIX_NUM_PIRQS, 3),
VMSTATE_END_OF_LIST()
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
},
.subsections = (const VMStateDescription*[]) {
&vmstate_piix3_rcr,
NULL
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
}
};
static void rcr_write(void *opaque, hwaddr addr, uint64_t val, unsigned len)
{
PIIX3State *d = opaque;
if (val & 4) {
qemu_system_reset_request();
return;
}
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
d->rcr = val & 2; /* keep System Reset type only */
}
static uint64_t rcr_read(void *opaque, hwaddr addr, unsigned len)
{
PIIX3State *d = opaque;
return d->rcr;
}
static const MemoryRegionOps rcr_ops = {
.read = rcr_read,
.write = rcr_write,
.endianness = DEVICE_LITTLE_ENDIAN
};
static void piix3_realize(PCIDevice *dev, Error **errp)
{
PIIX3State *d = DO_UPCAST(PIIX3State, dev, dev);
isa_bus_new(DEVICE(d), get_system_memory(),
pci_address_space_io(dev));
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
memory_region_init_io(&d->rcr_mem, OBJECT(dev), &rcr_ops, d,
"piix3-reset-control", 1);
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set Traditional PCI config space access is achieved by writing a 32 bit value to io port 0xcf8 to identify the bus, device, function and config register. Port 0xcfc then contains the register in question. But if you write the appropriate pair of magic values to 0xcf9, the machine will reboot. Spectacular! And not standardised in any way (certainly not part of the PCI spec), so different chipsets may have different requirements. Booo. In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control Register. Bit 1 (System Reset, SRST) would normally differentiate between soft reset and hard reset, but we ignore the difference beyond allowing the guest to read it back. RHBZ reference: 890459 This patch introduces the following overlap between the preexistent "pci-conf-idx" region and the "piix3-reset-control" region just being added. Partial output from "info mtree": I/O 0000000000000000-000000000000ffff (prio 0, RW): io 0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx 0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control I sanity-checked the patch by booting a RHEL-6.3 guest and found no problems. I summoned gdb and set a breakpoint on rcr_write() in order to gather a bit more confidence. Relevant frames of the stack: kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1, count=1) [kvm-all.c:1422] cpu_outb (addr=3321, val=6 '\006') [ioport.c:289] ioport_write (index=0, address=3321, data=6) [ioport.c:83] ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6) [ioport.c:212] memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0, width=1, data=6) [memory.c:439] access_with_adjusted_size (addr=0, value=0x7f3f531fbac0, size=1, access_size_min=1, access_size_max=4, access=0x7f3f5f6e0f90 <memory_region_write_accessor>, opaque=0x7f3f6227b668) [memory.c:364] memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0, value=0x7f3f531fbac0, size=1, shift=0, mask=255) [memory.c:334] rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1) [hw/piix_pci.c:498] The dispatch happens in ioport_write(); "index=0" means byte-wide access: static void ioport_write(int index, uint32_t address, uint32_t data) { static IOPortWriteFunc * const default_func[3] = { default_ioport_writeb, default_ioport_writew, default_ioport_writel }; IOPortWriteFunc *func = ioport_write_table[index][address]; if (!func) func = default_func[index]; func(ioport_opaque[address], address, data); } The "ioport_write_table" and "ioport_opaque" arrays describe the flattened IO port space. The first array is less interesting (it selects a thunk function). The "ioport_opaque" array is interesting because it decides how writing to the port is implemented ultimately. 4-byte wide access to 0xcf8 (pci-conf-idx): (gdb) print ioport_write_table[2][0xcf8] $1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write $2 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f5575cb <pci_host_config_write> 1-byte wide access to 0xcf9 (piix3-reset-control): (gdb) print ioport_write_table[0][0xcf9] $3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk> (gdb) print \ ((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write $4 = (void (*)(void *, hwaddr, uint64_t, unsigned int)) 0x7f3f5f6b42f1 <rcr_write> The higher priority of "piix3-reset-control" ensures that the 0xcf9 entries in ioport_write_table / ioport_opaque will always belong to it, independently of its relative registration order versus "pci-conf-idx". Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
memory_region_add_subregion_overlap(pci_address_space_io(dev), RCR_IOPORT,
&d->rcr_mem, 1);
qemu_register_reset(piix3_reset, d);
}
static void piix3_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
dc->desc = "ISA bridge";
dc->vmsd = &vmstate_piix3;
dc->hotpluggable = false;
k->realize = piix3_realize;
k->config_write = piix3_write_config;
k->vendor_id = PCI_VENDOR_ID_INTEL;
/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0;
k->class_id = PCI_CLASS_BRIDGE_ISA;
/*
* Reason: part of PIIX3 southbridge, needs to be wired up by
* pc_piix.c's pc_init1()
*/
dc->cannot_instantiate_with_device_add_yet = true;
}
static const TypeInfo piix3_info = {
.name = "PIIX3",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(PIIX3State),
.class_init = piix3_class_init,
};
static void piix3_xen_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
dc->desc = "ISA bridge";
dc->vmsd = &vmstate_piix3;
dc->hotpluggable = false;
k->realize = piix3_realize;
k->config_write = piix3_write_config_xen;
k->vendor_id = PCI_VENDOR_ID_INTEL;
/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0;
k->class_id = PCI_CLASS_BRIDGE_ISA;
/*
* Reason: part of PIIX3 southbridge, needs to be wired up by
* pc_piix.c's pc_init1()
*/
dc->cannot_instantiate_with_device_add_yet = true;
};
static const TypeInfo piix3_xen_info = {
.name = "PIIX3-xen",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(PIIX3State),
.class_init = piix3_xen_class_init,
};
static void i440fx_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->realize = i440fx_realize;
k->config_write = i440fx_write_config;
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->device_id = PCI_DEVICE_ID_INTEL_82441;
k->revision = 0x02;
k->class_id = PCI_CLASS_BRIDGE_HOST;
dc->desc = "Host bridge";
dc->vmsd = &vmstate_i440fx;
/*
* PCI-facing part of the host bridge, not usable without the
* host-facing part, which can't be device_add'ed, yet.
*/
dc->cannot_instantiate_with_device_add_yet = true;
dc->hotpluggable = false;
}
static const TypeInfo i440fx_info = {
.name = TYPE_I440FX_PCI_DEVICE,
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(PCII440FXState),
.class_init = i440fx_class_init,
};
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
static const char *i440fx_pcihost_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
I440FXState *s = I440FX_PCI_HOST_BRIDGE(host_bridge);
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
/* For backwards compat with old device paths */
if (s->short_root_bus) {
return "0000";
}
return "0000:00";
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
}
static Property i440fx_props[] = {
DEFINE_PROP_SIZE(PCI_HOST_PROP_PCI_HOLE64_SIZE, I440FXState,
pci_hole64_size, DEFAULT_PCI_HOLE64_SIZE),
DEFINE_PROP_UINT32("short_root_bus", I440FXState, short_root_bus, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void i440fx_pcihost_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
hc->root_bus_path = i440fx_pcihost_root_bus_path;
dc->realize = i440fx_pcihost_realize;
dc->fw_name = "pci";
dc->props = i440fx_props;
}
static const TypeInfo i440fx_pcihost_info = {
.name = TYPE_I440FX_PCI_HOST_BRIDGE,
.parent = TYPE_PCI_HOST_BRIDGE,
.instance_size = sizeof(I440FXState),
.instance_init = i440fx_pcihost_initfn,
.class_init = i440fx_pcihost_class_init,
};
static void i440fx_register_types(void)
{
type_register_static(&i440fx_info);
type_register_static(&piix3_info);
type_register_static(&piix3_xen_info);
type_register_static(&i440fx_pcihost_info);
}
type_init(i440fx_register_types)