qemu-e2k/Makefile

1098 lines
42 KiB
Makefile
Raw Normal View History

# Makefile for QEMU.
# Always point to the root of the build tree (needs GNU make).
BUILD_DIR=$(CURDIR)
# Before including a proper config-host.mak, assume we are in the source tree
SRC_PATH=.
UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
html info pdf txt \
help check-help print-% \
docker docker-% vm-test vm-build-%
print-%:
@echo '$*=$($*)'
# All following code might depend on configuration variables
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all:
include config-host.mak
git-submodule-update:
.PHONY: git-submodule-update
git_module_status := $(shell \
cd '$(SRC_PATH)' && \
GIT="$(GIT)" ./scripts/git-submodule.sh status $(GIT_SUBMODULES); \
echo $$?; \
)
ifeq (1,$(git_module_status))
build: allow automatic git submodule updates to be disabled Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26 14:52:26 +02:00
ifeq (no,$(GIT_UPDATE))
git-submodule-update:
$(call quiet-command, \
echo && \
echo "GIT submodule checkout is out of date. Please run" && \
echo " scripts/git-submodule.sh update $(GIT_SUBMODULES)" && \
echo "from the source directory checkout $(SRC_PATH)" && \
echo && \
exit 1)
else
git-submodule-update:
$(call quiet-command, \
(cd $(SRC_PATH) && GIT="$(GIT)" ./scripts/git-submodule.sh update $(GIT_SUBMODULES)), \
"GIT","$(GIT_SUBMODULES)")
endif
endif
.git-submodule-status: git-submodule-update config-host.mak
# Check that we're not trying to do an out-of-tree build from
# a tree that's been used for an in-tree build.
ifneq ($(realpath $(SRC_PATH)),$(realpath .))
ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
$(error This is an out of tree build but your source tree ($(SRC_PATH)) \
seems to have been used for an in-tree build. You can fix this by running \
"$(MAKE) distclean && rm -rf *-linux-user *-softmmu" in your source tree)
endif
endif
CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_LIST)),y)
CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_LIST)),y)
CONFIG_XEN := $(CONFIG_XEN_BACKEND)
CONFIG_ALL=y
-include config-all-devices.mak
-include config-all-disas.mak
config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios
@echo $@ is out-of-date, running configure
@# TODO: The next lines include code which supports a smooth
@# transition from old configurations without config.status.
@# This code can be removed after QEMU 1.7.
@if test -x config.status; then \
./config.status; \
else \
sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh; \
fi
else
config-host.mak:
ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
@echo "Please call configure before running make!"
@exit 1
endif
endif
include $(SRC_PATH)/rules.mak
GENERATED_FILES = qemu-version.h config-host.h qemu-options.def
GENERATED_FILES += qapi/qapi-builtin-types.h qapi/qapi-builtin-types.c
GENERATED_FILES += qapi/qapi-types.h qapi/qapi-types.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-types-block-core.h qapi/qapi-types-block-core.c
GENERATED_FILES += qapi/qapi-types-block.h qapi/qapi-types-block.c
GENERATED_FILES += qapi/qapi-types-char.h qapi/qapi-types-char.c
GENERATED_FILES += qapi/qapi-types-common.h qapi/qapi-types-common.c
GENERATED_FILES += qapi/qapi-types-crypto.h qapi/qapi-types-crypto.c
GENERATED_FILES += qapi/qapi-types-introspect.h qapi/qapi-types-introspect.c
GENERATED_FILES += qapi/qapi-types-job.h qapi/qapi-types-job.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-types-migration.h qapi/qapi-types-migration.c
GENERATED_FILES += qapi/qapi-types-misc.h qapi/qapi-types-misc.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-types-net.h qapi/qapi-types-net.c
GENERATED_FILES += qapi/qapi-types-rocker.h qapi/qapi-types-rocker.c
GENERATED_FILES += qapi/qapi-types-run-state.h qapi/qapi-types-run-state.c
GENERATED_FILES += qapi/qapi-types-sockets.h qapi/qapi-types-sockets.c
GENERATED_FILES += qapi/qapi-types-tpm.h qapi/qapi-types-tpm.c
GENERATED_FILES += qapi/qapi-types-trace.h qapi/qapi-types-trace.c
GENERATED_FILES += qapi/qapi-types-transaction.h qapi/qapi-types-transaction.c
GENERATED_FILES += qapi/qapi-types-ui.h qapi/qapi-types-ui.c
GENERATED_FILES += qapi/qapi-builtin-visit.h qapi/qapi-builtin-visit.c
GENERATED_FILES += qapi/qapi-visit.h qapi/qapi-visit.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-visit-block-core.h qapi/qapi-visit-block-core.c
GENERATED_FILES += qapi/qapi-visit-block.h qapi/qapi-visit-block.c
GENERATED_FILES += qapi/qapi-visit-char.h qapi/qapi-visit-char.c
GENERATED_FILES += qapi/qapi-visit-common.h qapi/qapi-visit-common.c
GENERATED_FILES += qapi/qapi-visit-crypto.h qapi/qapi-visit-crypto.c
GENERATED_FILES += qapi/qapi-visit-introspect.h qapi/qapi-visit-introspect.c
GENERATED_FILES += qapi/qapi-visit-job.h qapi/qapi-visit-job.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-visit-migration.h qapi/qapi-visit-migration.c
GENERATED_FILES += qapi/qapi-visit-misc.h qapi/qapi-visit-misc.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-visit-net.h qapi/qapi-visit-net.c
GENERATED_FILES += qapi/qapi-visit-rocker.h qapi/qapi-visit-rocker.c
GENERATED_FILES += qapi/qapi-visit-run-state.h qapi/qapi-visit-run-state.c
GENERATED_FILES += qapi/qapi-visit-sockets.h qapi/qapi-visit-sockets.c
GENERATED_FILES += qapi/qapi-visit-tpm.h qapi/qapi-visit-tpm.c
GENERATED_FILES += qapi/qapi-visit-trace.h qapi/qapi-visit-trace.c
GENERATED_FILES += qapi/qapi-visit-transaction.h qapi/qapi-visit-transaction.c
GENERATED_FILES += qapi/qapi-visit-ui.h qapi/qapi-visit-ui.c
GENERATED_FILES += qapi/qapi-commands.h qapi/qapi-commands.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-commands-block-core.h qapi/qapi-commands-block-core.c
GENERATED_FILES += qapi/qapi-commands-block.h qapi/qapi-commands-block.c
GENERATED_FILES += qapi/qapi-commands-char.h qapi/qapi-commands-char.c
GENERATED_FILES += qapi/qapi-commands-common.h qapi/qapi-commands-common.c
GENERATED_FILES += qapi/qapi-commands-crypto.h qapi/qapi-commands-crypto.c
GENERATED_FILES += qapi/qapi-commands-introspect.h qapi/qapi-commands-introspect.c
GENERATED_FILES += qapi/qapi-commands-job.h qapi/qapi-commands-job.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-commands-migration.h qapi/qapi-commands-migration.c
GENERATED_FILES += qapi/qapi-commands-misc.h qapi/qapi-commands-misc.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-commands-net.h qapi/qapi-commands-net.c
GENERATED_FILES += qapi/qapi-commands-rocker.h qapi/qapi-commands-rocker.c
GENERATED_FILES += qapi/qapi-commands-run-state.h qapi/qapi-commands-run-state.c
GENERATED_FILES += qapi/qapi-commands-sockets.h qapi/qapi-commands-sockets.c
GENERATED_FILES += qapi/qapi-commands-tpm.h qapi/qapi-commands-tpm.c
GENERATED_FILES += qapi/qapi-commands-trace.h qapi/qapi-commands-trace.c
GENERATED_FILES += qapi/qapi-commands-transaction.h qapi/qapi-commands-transaction.c
GENERATED_FILES += qapi/qapi-commands-ui.h qapi/qapi-commands-ui.c
GENERATED_FILES += qapi/qapi-events.h qapi/qapi-events.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-events-block-core.h qapi/qapi-events-block-core.c
GENERATED_FILES += qapi/qapi-events-block.h qapi/qapi-events-block.c
GENERATED_FILES += qapi/qapi-events-char.h qapi/qapi-events-char.c
GENERATED_FILES += qapi/qapi-events-common.h qapi/qapi-events-common.c
GENERATED_FILES += qapi/qapi-events-crypto.h qapi/qapi-events-crypto.c
GENERATED_FILES += qapi/qapi-events-introspect.h qapi/qapi-events-introspect.c
GENERATED_FILES += qapi/qapi-events-job.h qapi/qapi-events-job.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-events-migration.h qapi/qapi-events-migration.c
GENERATED_FILES += qapi/qapi-events-misc.h qapi/qapi-events-misc.c
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
GENERATED_FILES += qapi/qapi-events-net.h qapi/qapi-events-net.c
GENERATED_FILES += qapi/qapi-events-rocker.h qapi/qapi-events-rocker.c
GENERATED_FILES += qapi/qapi-events-run-state.h qapi/qapi-events-run-state.c
GENERATED_FILES += qapi/qapi-events-sockets.h qapi/qapi-events-sockets.c
GENERATED_FILES += qapi/qapi-events-tpm.h qapi/qapi-events-tpm.c
GENERATED_FILES += qapi/qapi-events-trace.h qapi/qapi-events-trace.c
GENERATED_FILES += qapi/qapi-events-transaction.h qapi/qapi-events-transaction.c
GENERATED_FILES += qapi/qapi-events-ui.h qapi/qapi-events-ui.c
GENERATED_FILES += qapi/qapi-introspect.c qapi/qapi-introspect.h
GENERATED_FILES += qapi/qapi-doc.texi
GENERATED_FILES += trace/generated-tcg-tracers.h
GENERATED_FILES += trace/generated-helpers-wrappers.h
GENERATED_FILES += trace/generated-helpers.h
GENERATED_FILES += trace/generated-helpers.c
ifdef CONFIG_TRACE_UST
GENERATED_FILES += trace-ust-all.h
GENERATED_FILES += trace-ust-all.c
endif
GENERATED_FILES += module_block.h
TRACE_HEADERS = trace-root.h $(trace-events-subdirs:%=%/trace.h)
TRACE_SOURCES = trace-root.c $(trace-events-subdirs:%=%/trace.c)
TRACE_DTRACE =
ifdef CONFIG_TRACE_DTRACE
TRACE_HEADERS += trace-dtrace-root.h $(trace-events-subdirs:%=%/trace-dtrace.h)
TRACE_DTRACE += trace-dtrace-root.dtrace $(trace-events-subdirs:%=%/trace-dtrace.dtrace)
endif
ifdef CONFIG_TRACE_UST
TRACE_HEADERS += trace-ust-root.h $(trace-events-subdirs:%=%/trace-ust.h)
endif
GENERATED_FILES += $(TRACE_HEADERS)
GENERATED_FILES += $(TRACE_SOURCES)
GENERATED_FILES += $(BUILD_DIR)/trace-events-all
GENERATED_FILES += .git-submodule-status
trace-group-name = $(shell dirname $1 | sed -e 's/[^a-zA-Z0-9]/_/g')
tracetool-y = $(SRC_PATH)/scripts/tracetool.py
tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
%/trace.h: %/trace.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=h \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
%/trace.c: %/trace.c-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace.c-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=c \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
%/trace-ust.h: %/trace-ust.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace-ust.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=ust-events-h \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
%/trace-dtrace.dtrace: %/trace-dtrace.dtrace-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace-dtrace.dtrace-timestamp: $(SRC_PATH)/%/trace-events $(BUILD_DIR)/config-host.mak $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=d \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
%/trace-dtrace.h: %/trace-dtrace.dtrace $(tracetool-y)
$(call quiet-command,dtrace -o $@ -h -s $<, "GEN","$@")
%/trace-dtrace.o: %/trace-dtrace.dtrace $(tracetool-y)
trace-root.h: trace-root.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=h \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
trace-root.c: trace-root.c-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-root.c-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=c \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
trace-ust-root.h: trace-ust-root.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-ust-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=ust-events-h \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
trace-ust-all.h: trace-ust-all.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-ust-all.h-timestamp: $(trace-events-files) $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=ust-events-h \
--backends=$(TRACE_BACKENDS) \
$(trace-events-files) > $@,"GEN","$(@:%-timestamp=%)")
trace-ust-all.c: trace-ust-all.c-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-ust-all.c-timestamp: $(trace-events-files) $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=ust-events-c \
--backends=$(TRACE_BACKENDS) \
$(trace-events-files) > $@,"GEN","$(@:%-timestamp=%)")
trace-dtrace-root.dtrace: trace-dtrace-root.dtrace-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-dtrace-root.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=d \
--backends=$(TRACE_BACKENDS) \
$< > $@,"GEN","$(@:%-timestamp=%)")
trace-dtrace-root.h: trace-dtrace-root.dtrace
$(call quiet-command,dtrace -o $@ -h -s $<, "GEN","$@")
trace-dtrace-root.o: trace-dtrace-root.dtrace
KEYCODEMAP_GEN = $(SRC_PATH)/ui/keycodemapdb/tools/keymap-gen
KEYCODEMAP_CSV = $(SRC_PATH)/ui/keycodemapdb/data/keymaps.csv
KEYCODEMAP_FILES = \
ui/input-keymap-atset1-to-qcode.c \
ui: convert common input code to keycodemapdb Replace the number_to_qcode, qcode_to_number and linux_to_qcode tables with automatically generated tables. Missing entries in linux_to_qcode now fixed: KEY_LINEFEED -> Q_KEY_CODE_LF KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS KEY_COMPOSE -> Q_KEY_CODE_COMPOSE KEY_AGAIN -> Q_KEY_CODE_AGAIN KEY_PROPS -> Q_KEY_CODE_PROPS KEY_UNDO -> Q_KEY_CODE_UNDO KEY_FRONT -> Q_KEY_CODE_FRONT KEY_COPY -> Q_KEY_CODE_COPY KEY_OPEN -> Q_KEY_CODE_OPEN KEY_PASTE -> Q_KEY_CODE_PASTE KEY_CUT -> Q_KEY_CODE_CUT KEY_HELP -> Q_KEY_CODE_HELP KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT In addition, some fixes: - KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes sets, while KEY_PLAYCD only appears in AT set1, so the former is a more useful mapping. Missing entries in qcode_to_number now fixed: Q_KEY_CODE_AGAIN -> 0x85 Q_KEY_CODE_PROPS -> 0x86 Q_KEY_CODE_UNDO -> 0x87 Q_KEY_CODE_FRONT -> 0x8c Q_KEY_CODE_COPY -> 0xf8 Q_KEY_CODE_OPEN -> 0x64 Q_KEY_CODE_PASTE -> 0x65 Q_KEY_CODE_CUT -> 0xbc Q_KEY_CODE_LF -> 0x5b Q_KEY_CODE_HELP -> 0xf5 Q_KEY_CODE_COMPOSE -> 0xdd Q_KEY_CODE_KP_EQUALS -> 0x59 Q_KEY_CODE_MEDIASELECT -> 0xed In addition, some fixes: - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xdd) and is now mapped to 0x9e - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead of to 0xe041 (Find) - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana) instead of of 0x77 (Hirigana) - Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined scan code in AT set 1, it is now mapped to 0x54 (sysrq) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-5-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29 12:11:59 +02:00
ui/input-keymap-linux-to-qcode.c \
hw: convert ps2 device to keycodemapdb Replace the qcode_to_keycode_set1, qcode_to_keycode_set2, and qcode_to_keycode_set3 tables with automatically generated tables. Missing entries in qcode_to_keycode_set1 now fixed: - Q_KEY_CODE_SYSRQ -> 0x54 - Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case) - Q_KEY_CODE_AGAIN -> 0xe005 - Q_KEY_CODE_PROPS -> 0xe006 - Q_KEY_CODE_UNDO -> 0xe007 - Q_KEY_CODE_FRONT -> 0xe00c - Q_KEY_CODE_COPY -> 0xe078 - Q_KEY_CODE_OPEN -> 0x64 - Q_KEY_CODE_PASTE -> 0x65 - Q_KEY_CODE_CUT -> 0xe03c - Q_KEY_CODE_LF -> 0x5b - Q_KEY_CODE_HELP -> 0xe075 - Q_KEY_CODE_COMPOSE -> 0xe05d - Q_KEY_CODE_PAUSE -> 0xe046 - Q_KEY_CODE_KP_EQUALS -> 0x59 And some mistakes corrected: - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana) instead of of 0x77 (Hirigana) - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xe05d) and is now mapped to 0xe01e - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead of to 0xe041 (Find) - Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0 as the prefix Missing entries in qcode_to_keycode_set2 now fixed: - Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case) - Q_KEY_CODE_COMPOSE -> 0xe02f - Q_KEY_CODE_PAUSE -> 0xe077 - Q_KEY_CODE_KP_EQUALS -> 0x0f And some mistakes corrected: - Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana) instead of of 0x62 (Hirigana) - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xe02f) and is now not mapped - Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now not mapped. - Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0 as the prefix Missing entries in qcode_to_keycode_set3 now fixed: - Q_KEY_CODE_ASTERISK -> 0x7e - Q_KEY_CODE_SYSRQ -> 0x57 - Q_KEY_CODE_LESS -> 0x13 - Q_KEY_CODE_STOP -> 0x0a - Q_KEY_CODE_AGAIN -> 0x0b - Q_KEY_CODE_PROPS -> 0x0c - Q_KEY_CODE_UNDO -> 0x10 - Q_KEY_CODE_COPY -> 0x18 - Q_KEY_CODE_OPEN -> 0x20 - Q_KEY_CODE_PASTE -> 0x28 - Q_KEY_CODE_FIND -> 0x30 - Q_KEY_CODE_CUT -> 0x38 - Q_KEY_CODE_HELP -> 0x09 - Q_KEY_CODE_COMPOSE -> 0x8d - Q_KEY_CODE_AUDIONEXT -> 0x93 - Q_KEY_CODE_AUDIOPREV -> 0x94 - Q_KEY_CODE_AUDIOSTOP -> 0x98 - Q_KEY_CODE_AUDIOMUTE -> 0x9c - Q_KEY_CODE_VOLUMEUP -> 0x95 - Q_KEY_CODE_VOLUMEDOWN -> 0x9d - Q_KEY_CODE_CALCULATOR -> 0xa3 - Q_KEY_CODE_AC_HOME -> 0x97 And some mistakes corrected: - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0x8d) and is now 0x91 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20180117164118.8510-2-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-17 17:41:15 +01:00
ui/input-keymap-qcode-to-atset1.c \
ui/input-keymap-qcode-to-atset2.c \
ui/input-keymap-qcode-to-atset3.c \
ui/input-keymap-qcode-to-linux.c \
ui: convert common input code to keycodemapdb Replace the number_to_qcode, qcode_to_number and linux_to_qcode tables with automatically generated tables. Missing entries in linux_to_qcode now fixed: KEY_LINEFEED -> Q_KEY_CODE_LF KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS KEY_COMPOSE -> Q_KEY_CODE_COMPOSE KEY_AGAIN -> Q_KEY_CODE_AGAIN KEY_PROPS -> Q_KEY_CODE_PROPS KEY_UNDO -> Q_KEY_CODE_UNDO KEY_FRONT -> Q_KEY_CODE_FRONT KEY_COPY -> Q_KEY_CODE_COPY KEY_OPEN -> Q_KEY_CODE_OPEN KEY_PASTE -> Q_KEY_CODE_PASTE KEY_CUT -> Q_KEY_CODE_CUT KEY_HELP -> Q_KEY_CODE_HELP KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT In addition, some fixes: - KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes sets, while KEY_PLAYCD only appears in AT set1, so the former is a more useful mapping. Missing entries in qcode_to_number now fixed: Q_KEY_CODE_AGAIN -> 0x85 Q_KEY_CODE_PROPS -> 0x86 Q_KEY_CODE_UNDO -> 0x87 Q_KEY_CODE_FRONT -> 0x8c Q_KEY_CODE_COPY -> 0xf8 Q_KEY_CODE_OPEN -> 0x64 Q_KEY_CODE_PASTE -> 0x65 Q_KEY_CODE_CUT -> 0xbc Q_KEY_CODE_LF -> 0x5b Q_KEY_CODE_HELP -> 0xf5 Q_KEY_CODE_COMPOSE -> 0xdd Q_KEY_CODE_KP_EQUALS -> 0x59 Q_KEY_CODE_MEDIASELECT -> 0xed In addition, some fixes: - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xdd) and is now mapped to 0x9e - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead of to 0xe041 (Find) - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana) instead of of 0x77 (Hirigana) - Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined scan code in AT set 1, it is now mapped to 0x54 (sysrq) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-5-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29 12:11:59 +02:00
ui/input-keymap-qcode-to-qnum.c \
ui/input-keymap-qcode-to-sun.c \
ui: convert common input code to keycodemapdb Replace the number_to_qcode, qcode_to_number and linux_to_qcode tables with automatically generated tables. Missing entries in linux_to_qcode now fixed: KEY_LINEFEED -> Q_KEY_CODE_LF KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS KEY_COMPOSE -> Q_KEY_CODE_COMPOSE KEY_AGAIN -> Q_KEY_CODE_AGAIN KEY_PROPS -> Q_KEY_CODE_PROPS KEY_UNDO -> Q_KEY_CODE_UNDO KEY_FRONT -> Q_KEY_CODE_FRONT KEY_COPY -> Q_KEY_CODE_COPY KEY_OPEN -> Q_KEY_CODE_OPEN KEY_PASTE -> Q_KEY_CODE_PASTE KEY_CUT -> Q_KEY_CODE_CUT KEY_HELP -> Q_KEY_CODE_HELP KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT In addition, some fixes: - KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes sets, while KEY_PLAYCD only appears in AT set1, so the former is a more useful mapping. Missing entries in qcode_to_number now fixed: Q_KEY_CODE_AGAIN -> 0x85 Q_KEY_CODE_PROPS -> 0x86 Q_KEY_CODE_UNDO -> 0x87 Q_KEY_CODE_FRONT -> 0x8c Q_KEY_CODE_COPY -> 0xf8 Q_KEY_CODE_OPEN -> 0x64 Q_KEY_CODE_PASTE -> 0x65 Q_KEY_CODE_CUT -> 0xbc Q_KEY_CODE_LF -> 0x5b Q_KEY_CODE_HELP -> 0xf5 Q_KEY_CODE_COMPOSE -> 0xdd Q_KEY_CODE_KP_EQUALS -> 0x59 Q_KEY_CODE_MEDIASELECT -> 0xed In addition, some fixes: - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xdd) and is now mapped to 0x9e - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead of to 0xe041 (Find) - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana) instead of of 0x77 (Hirigana) - Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined scan code in AT set 1, it is now mapped to 0x54 (sysrq) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-5-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29 12:11:59 +02:00
ui/input-keymap-qnum-to-qcode.c \
ui/input-keymap-usb-to-qcode.c \
ui/input-keymap-win32-to-qcode.c \
ui/input-keymap-x11-to-qcode.c \
ui/input-keymap-xorgevdev-to-qcode.c \
ui/input-keymap-xorgkbd-to-qcode.c \
ui/input-keymap-xorgxquartz-to-qcode.c \
ui/input-keymap-xorgxwin-to-qcode.c \
ui/input-keymap-osx-to-qcode.c \
$(NULL)
GENERATED_FILES += $(KEYCODEMAP_FILES)
ui/input-keymap-%.c: $(KEYCODEMAP_GEN) $(KEYCODEMAP_CSV) $(SRC_PATH)/ui/Makefile.objs
$(call quiet-command,\
stem=$* && src=$${stem%-to-*} dst=$${stem#*-to-} && \
test -e $(KEYCODEMAP_GEN) && \
$(PYTHON) $(KEYCODEMAP_GEN) \
--lang glib2 \
--varname qemu_input_map_$${src}_to_$${dst} \
code-map $(KEYCODEMAP_CSV) $${src} $${dst} \
> $@ || rm -f $@, "GEN", "$@")
$(KEYCODEMAP_GEN): .git-submodule-status
$(KEYCODEMAP_CSV): .git-submodule-status
# Don't try to regenerate Makefile or configure
# We don't generate any of them
Makefile: ;
configure: ;
.PHONY: all clean cscope distclean html info install install-doc \
pdf txt recurse-all dist msi FORCE
$(call set-vpath, $(SRC_PATH))
LIBS+=-lz $(LIBS_TOOLS)
HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = qemu-bridge-helper$(EXESUF)
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8
DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
DOCS+=docs/qemu-block-drivers.7
ifdef CONFIG_VIRTFS
DOCS+=fsdev/virtfs-proxy-helper.1
endif
else
DOCS=
endif
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR)
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_LIST))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %-config-devices.mak.d, $(TARGET_LIST))
ifeq ($(SUBDIR_DEVICES_MAK),)
config-all-devices.mak:
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,echo '# no devices' > $@,"GEN","$@")
else
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
$(call quiet-command, sed -n \
's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
$(SUBDIR_DEVICES_MAK) | sort -u > $@, \
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
"GEN","$@")
endif
-include $(SUBDIR_DEVICES_MAK_DEP)
%/config-devices.mak: default-configs/%.mak $(SRC_PATH)/scripts/make_device_config.sh
$(call quiet-command, \
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $< $*-config-devices.mak.d $@ > $@.tmp,"GEN","$@.tmp")
$(call quiet-command, if test -f $@; then \
if cmp -s $@.old $@; then \
mv $@.tmp $@; \
cp -p $@ $@.old; \
else \
if test -f $@.old; then \
echo "WARNING: $@ (user modified) out of date.";\
else \
echo "WARNING: $@ out of date.";\
fi; \
echo "Run \"$(MAKE) defconfig\" to regenerate."; \
rm $@.tmp; \
fi; \
else \
mv $@.tmp $@; \
cp -p $@ $@.old; \
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
fi,"GEN","$@");
defconfig:
rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
endif
dummy := $(call unnest-vars,, \
stub-obj-y \
chardev-obj-y \
util-obj-y \
qga-obj-y \
ivshmem-client-obj-y \
ivshmem-server-obj-y \
libvhost-user-obj-y \
vhost-user-scsi-obj-y \
vhost-user-blk-obj-y \
qga-vss-dll-obj-y \
block-obj-y \
block-obj-m \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m \
ui-obj-y \
ui-obj-m \
audio-obj-y \
audio-obj-m \
trace-obj-y)
include $(SRC_PATH)/tests/Makefile.include
all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all modules
qemu-version.h: FORCE
$(call quiet-command, \
(cd $(SRC_PATH); \
if test -n "$(PKGVERSION)"; then \
pkgvers="$(PKGVERSION)"; \
else \
if test -d .git; then \
pkgvers=$$(git describe --match 'v*' 2>/dev/null | tr -d '\n');\
if ! git diff-index --quiet HEAD &>/dev/null; then \
pkgvers="$${pkgvers}-dirty"; \
fi; \
fi; \
fi; \
printf "#define QEMU_PKGVERSION \"$${pkgvers}\"\n"; \
if test -n "$${pkgvers}"; then \
printf '#define QEMU_FULL_VERSION QEMU_VERSION " (" QEMU_PKGVERSION ")"\n'; \
else \
printf '#define QEMU_FULL_VERSION QEMU_VERSION\n'; \
fi; \
) > $@.tmp)
$(call quiet-command, if ! cmp -s $@ $@.tmp; then \
mv $@.tmp $@; \
else \
rm $@.tmp; \
fi)
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_LIST))
SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
subdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt
DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt
subdir-dtc: .git-submodule-status dtc/libfdt dtc/tests
$(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,)
dtc/%: .git-submodule-status
@mkdir -p $@
# Overriding CFLAGS causes us to lose defines added in the sub-makefile.
# Not overriding CFLAGS leads to mis-matches between compilation modes.
# Therefore we replicate some of the logic in the sub-makefile.
# Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
# no need to annoy QEMU developers with such things.
CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS))
CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
CAP_CFLAGS += -DCAPSTONE_HAS_ARM
CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
CAP_CFLAGS += -DCAPSTONE_HAS_X86
subdir-capstone: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) $(chardev-obj-y) \
$(qom-obj-y) $(crypto-aes-obj-$(CONFIG_USER_ONLY))
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
# Only keep -O and -g cflags
romsubdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/" CFLAGS="$(filter -O% -g%,$(CFLAGS))",)
ALL_SUBDIRS=$(TARGET_LIST) $(patsubst %,pc-bios/%, $(ROMS))
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
Makefile: $(version-obj-y)
######################################################################
# Build libraries
libqemuutil.a: $(util-obj-y) $(trace-obj-y) $(stub-obj-y)
libvhost-user.a: $(libvhost-user-obj-y)
######################################################################
COMMON_LDADDS = libqemuutil.a
qemu-img.o: qemu-img-cmds.h
qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o $(COMMON_LDADDS)
qemu-keymap$(EXESUF): qemu-keymap.o ui/input-keymap.o $(COMMON_LDADDS)
fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o $(COMMON_LDADDS)
fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
ifdef CONFIG_MPATH
scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
endif
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
qemu-ga$(EXESUF): LIBS = $(LIBS_QGA)
qemu-ga$(EXESUF): QEMU_CFLAGS += -I qga/qapi-generated
qemu-keymap$(EXESUF): LIBS += $(XKBCOMMON_LIBS)
qemu-keymap$(EXESUF): QEMU_CFLAGS += $(XKBCOMMON_CFLAGS)
qapi-py = $(SRC_PATH)/scripts/qapi/commands.py \
$(SRC_PATH)/scripts/qapi/events.py \
$(SRC_PATH)/scripts/qapi/introspect.py \
$(SRC_PATH)/scripts/qapi/types.py \
$(SRC_PATH)/scripts/qapi/visit.py \
$(SRC_PATH)/scripts/qapi/common.py \
$(SRC_PATH)/scripts/qapi/doc.py \
$(SRC_PATH)/scripts/qapi-gen.py
qga/qapi-generated/qga-qapi-types.c qga/qapi-generated/qga-qapi-types.h \
qga/qapi-generated/qga-qapi-visit.c qga/qapi-generated/qga-qapi-visit.h \
qga/qapi-generated/qga-qapi-commands.h qga/qapi-generated/qga-qapi-commands.c \
qga/qapi-generated/qga-qapi-doc.texi: \
qga/qapi-generated/qapi-gen-timestamp ;
qga/qapi-generated/qapi-gen-timestamp: $(SRC_PATH)/qga/qapi-schema.json $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-gen.py \
-o qga/qapi-generated -p "qga-" $<, \
"GEN","$(@:%-timestamp=%)")
@>$@
qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json $(SRC_PATH)/qapi/common.json \
$(SRC_PATH)/qapi/block.json $(SRC_PATH)/qapi/block-core.json \
$(SRC_PATH)/qapi/char.json \
$(SRC_PATH)/qapi/crypto.json \
$(SRC_PATH)/qapi/introspect.json \
$(SRC_PATH)/qapi/job.json \
$(SRC_PATH)/qapi/migration.json \
$(SRC_PATH)/qapi/misc.json \
$(SRC_PATH)/qapi/net.json \
$(SRC_PATH)/qapi/rocker.json \
$(SRC_PATH)/qapi/run-state.json \
$(SRC_PATH)/qapi/sockets.json \
$(SRC_PATH)/qapi/tpm.json \
$(SRC_PATH)/qapi/trace.json \
$(SRC_PATH)/qapi/transaction.json \
$(SRC_PATH)/qapi/ui.json
qapi/qapi-builtin-types.c qapi/qapi-builtin-types.h \
qapi/qapi-types.c qapi/qapi-types.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-types-block-core.c qapi/qapi-types-block-core.h \
qapi/qapi-types-block.c qapi/qapi-types-block.h \
qapi/qapi-types-char.c qapi/qapi-types-char.h \
qapi/qapi-types-common.c qapi/qapi-types-common.h \
qapi/qapi-types-crypto.c qapi/qapi-types-crypto.h \
qapi/qapi-types-introspect.c qapi/qapi-types-introspect.h \
qapi/qapi-types-job.c qapi/qapi-types-job.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-types-migration.c qapi/qapi-types-migration.h \
qapi/qapi-types-misc.c qapi/qapi-types-misc.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-types-net.c qapi/qapi-types-net.h \
qapi/qapi-types-rocker.c qapi/qapi-types-rocker.h \
qapi/qapi-types-run-state.c qapi/qapi-types-run-state.h \
qapi/qapi-types-sockets.c qapi/qapi-types-sockets.h \
qapi/qapi-types-tpm.c qapi/qapi-types-tpm.h \
qapi/qapi-types-trace.c qapi/qapi-types-trace.h \
qapi/qapi-types-transaction.c qapi/qapi-types-transaction.h \
qapi/qapi-types-ui.c qapi/qapi-types-ui.h \
qapi/qapi-builtin-visit.c qapi/qapi-builtin-visit.h \
qapi/qapi-visit.c qapi/qapi-visit.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-visit-block-core.c qapi/qapi-visit-block-core.h \
qapi/qapi-visit-block.c qapi/qapi-visit-block.h \
qapi/qapi-visit-char.c qapi/qapi-visit-char.h \
qapi/qapi-visit-common.c qapi/qapi-visit-common.h \
qapi/qapi-visit-crypto.c qapi/qapi-visit-crypto.h \
qapi/qapi-visit-introspect.c qapi/qapi-visit-introspect.h \
qapi/qapi-visit-job.c qapi/qapi-visit-job.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-visit-migration.c qapi/qapi-visit-migration.h \
qapi/qapi-visit-misc.c qapi/qapi-visit-misc.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-visit-net.c qapi/qapi-visit-net.h \
qapi/qapi-visit-rocker.c qapi/qapi-visit-rocker.h \
qapi/qapi-visit-run-state.c qapi/qapi-visit-run-state.h \
qapi/qapi-visit-sockets.c qapi/qapi-visit-sockets.h \
qapi/qapi-visit-tpm.c qapi/qapi-visit-tpm.h \
qapi/qapi-visit-trace.c qapi/qapi-visit-trace.h \
qapi/qapi-visit-transaction.c qapi/qapi-visit-transaction.h \
qapi/qapi-visit-ui.c qapi/qapi-visit-ui.h \
qapi/qapi-commands.h qapi/qapi-commands.c \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-commands-block-core.c qapi/qapi-commands-block-core.h \
qapi/qapi-commands-block.c qapi/qapi-commands-block.h \
qapi/qapi-commands-char.c qapi/qapi-commands-char.h \
qapi/qapi-commands-common.c qapi/qapi-commands-common.h \
qapi/qapi-commands-crypto.c qapi/qapi-commands-crypto.h \
qapi/qapi-commands-introspect.c qapi/qapi-commands-introspect.h \
qapi/qapi-commands-job.c qapi/qapi-commands-job.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-commands-migration.c qapi/qapi-commands-migration.h \
qapi/qapi-commands-misc.c qapi/qapi-commands-misc.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-commands-net.c qapi/qapi-commands-net.h \
qapi/qapi-commands-rocker.c qapi/qapi-commands-rocker.h \
qapi/qapi-commands-run-state.c qapi/qapi-commands-run-state.h \
qapi/qapi-commands-sockets.c qapi/qapi-commands-sockets.h \
qapi/qapi-commands-tpm.c qapi/qapi-commands-tpm.h \
qapi/qapi-commands-trace.c qapi/qapi-commands-trace.h \
qapi/qapi-commands-transaction.c qapi/qapi-commands-transaction.h \
qapi/qapi-commands-ui.c qapi/qapi-commands-ui.h \
qapi/qapi-events.c qapi/qapi-events.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-events-block-core.c qapi/qapi-events-block-core.h \
qapi/qapi-events-block.c qapi/qapi-events-block.h \
qapi/qapi-events-char.c qapi/qapi-events-char.h \
qapi/qapi-events-common.c qapi/qapi-events-common.h \
qapi/qapi-events-crypto.c qapi/qapi-events-crypto.h \
qapi/qapi-events-introspect.c qapi/qapi-events-introspect.h \
qapi/qapi-events-job.c qapi/qapi-events-job.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-events-migration.c qapi/qapi-events-migration.h \
qapi/qapi-events-misc.c qapi/qapi-events-misc.h \
qapi: Generate separate .h, .c for each module Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-11 10:36:00 +01:00
qapi/qapi-events-net.c qapi/qapi-events-net.h \
qapi/qapi-events-rocker.c qapi/qapi-events-rocker.h \
qapi/qapi-events-run-state.c qapi/qapi-events-run-state.h \
qapi/qapi-events-sockets.c qapi/qapi-events-sockets.h \
qapi/qapi-events-tpm.c qapi/qapi-events-tpm.h \
qapi/qapi-events-trace.c qapi/qapi-events-trace.h \
qapi/qapi-events-transaction.c qapi/qapi-events-transaction.h \
qapi/qapi-events-ui.c qapi/qapi-events-ui.h \
qapi/qapi-introspect.h qapi/qapi-introspect.c \
qapi/qapi-doc.texi: \
qapi-gen-timestamp ;
qapi-gen-timestamp: $(qapi-modules) $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-gen.py \
-o "qapi" -b $<, \
"GEN","$(@:%-timestamp=%)")
@>$@
QGALIB_GEN=$(addprefix qga/qapi-generated/, qga-qapi-types.h qga-qapi-visit.h qga-qapi-commands.h)
$(qga-obj-y): $(QGALIB_GEN)
qemu-ga$(EXESUF): $(qga-obj-y) $(COMMON_LDADDS)
build: qemu-ga: add 'qemu-ga' build target for w32 Currently POSIX builds rely on 'qemu-ga' target to do qga-only distributable build. On w32, as with most standalone binary targets, we rely on 'qemu-ga.exe' target. Unlike with POSIX, qemu-ga for w32 has a number of related targets such as VSS DLL and MSI package. We can do the full distributable qga-only build on w32 with: make qemu-ga.exe or: make msi To make that work, we tie VSS dependencies onto qemu-ga.exe. However, in reality the DLL isn't part of the binary, so we use a filter to pull them out of the LINK recipe, which attempts to link against prereqs for binary targets. Additionally, it could be argued that VSS is a separate distributable, and shouldn't be implied by qemu-ga.exe binary target. To avoid this, we can tie the VSS dependencies only to the 'msi' target, but that would make it impossible to do a qga-only build of the w32 distributable without building the 'msi' package, which was supported in the past. An alternative approach is to add a new target to build the whole distributable. w32 allows us to use the same build target we use on POSIX, 'qemu-ga', since the current binary-only target on w32 is 'qemu-ga.exe'. To further simplify the build, we also make 'qemu-ga' build the MSI package if the appropriate ./configure options are set, making the full qga-only build the same on both POSIX and w32: `make qemu-ga` Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-08 01:47:05 +02:00
$(call LINK, $^)
ifdef QEMU_GA_MSI_ENABLED
QEMU_GA_MSI=qemu-ga-$(ARCH).msi
msi: $(QEMU_GA_MSI)
build: qemu-ga: add 'qemu-ga' build target for w32 Currently POSIX builds rely on 'qemu-ga' target to do qga-only distributable build. On w32, as with most standalone binary targets, we rely on 'qemu-ga.exe' target. Unlike with POSIX, qemu-ga for w32 has a number of related targets such as VSS DLL and MSI package. We can do the full distributable qga-only build on w32 with: make qemu-ga.exe or: make msi To make that work, we tie VSS dependencies onto qemu-ga.exe. However, in reality the DLL isn't part of the binary, so we use a filter to pull them out of the LINK recipe, which attempts to link against prereqs for binary targets. Additionally, it could be argued that VSS is a separate distributable, and shouldn't be implied by qemu-ga.exe binary target. To avoid this, we can tie the VSS dependencies only to the 'msi' target, but that would make it impossible to do a qga-only build of the w32 distributable without building the 'msi' package, which was supported in the past. An alternative approach is to add a new target to build the whole distributable. w32 allows us to use the same build target we use on POSIX, 'qemu-ga', since the current binary-only target on w32 is 'qemu-ga.exe'. To further simplify the build, we also make 'qemu-ga' build the MSI package if the appropriate ./configure options are set, making the full qga-only build the same on both POSIX and w32: `make qemu-ga` Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-08 01:47:05 +02:00
$(QEMU_GA_MSI): qemu-ga.exe $(QGA_VSS_PROVIDER)
$(QEMU_GA_MSI): config-host.mak
$(QEMU_GA_MSI): $(SRC_PATH)/qga/installer/qemu-ga.wxs
$(call quiet-command,QEMU_GA_VERSION="$(QEMU_GA_VERSION)" QEMU_GA_MANUFACTURER="$(QEMU_GA_MANUFACTURER)" QEMU_GA_DISTRO="$(QEMU_GA_DISTRO)" BUILD_DIR="$(BUILD_DIR)" \
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
wixl -o $@ $(QEMU_GA_MSI_ARCH) $(QEMU_GA_MSI_WITH_VSS) $(QEMU_GA_MSI_MINGW_DLL_PATH) $<,"WIXL","$@")
else
msi:
@echo "MSI build not configured or dependency resolution failed (reconfigure with --enable-guest-agent-msi option)"
endif
build: qemu-ga: add 'qemu-ga' build target for w32 Currently POSIX builds rely on 'qemu-ga' target to do qga-only distributable build. On w32, as with most standalone binary targets, we rely on 'qemu-ga.exe' target. Unlike with POSIX, qemu-ga for w32 has a number of related targets such as VSS DLL and MSI package. We can do the full distributable qga-only build on w32 with: make qemu-ga.exe or: make msi To make that work, we tie VSS dependencies onto qemu-ga.exe. However, in reality the DLL isn't part of the binary, so we use a filter to pull them out of the LINK recipe, which attempts to link against prereqs for binary targets. Additionally, it could be argued that VSS is a separate distributable, and shouldn't be implied by qemu-ga.exe binary target. To avoid this, we can tie the VSS dependencies only to the 'msi' target, but that would make it impossible to do a qga-only build of the w32 distributable without building the 'msi' package, which was supported in the past. An alternative approach is to add a new target to build the whole distributable. w32 allows us to use the same build target we use on POSIX, 'qemu-ga', since the current binary-only target on w32 is 'qemu-ga.exe'. To further simplify the build, we also make 'qemu-ga' build the MSI package if the appropriate ./configure options are set, making the full qga-only build the same on both POSIX and w32: `make qemu-ga` Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-08 01:47:05 +02:00
ifneq ($(EXESUF),)
.PHONY: qemu-ga
qemu-ga: qemu-ga$(EXESUF) $(QGA_VSS_PROVIDER) $(QEMU_GA_MSI)
endif
ifdef CONFIG_IVSHMEM
ivshmem-client$(EXESUF): $(ivshmem-client-obj-y) $(COMMON_LDADDS)
$(call LINK, $^)
ivshmem-server$(EXESUF): $(ivshmem-server-obj-y) $(COMMON_LDADDS)
$(call LINK, $^)
endif
vhost-user-scsi$(EXESUF): $(vhost-user-scsi-obj-y) libvhost-user.a
$(call LINK, $^)
vhost-user-blk$(EXESUF): $(vhost-user-blk-obj-y) libvhost-user.a
$(call LINK, $^)
module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
$(call quiet-command,$(PYTHON) $< $@ \
$(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
"GEN","$@")
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
rm -f *.msi
find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f -exec rm {} +
qemu-ga: Add Windows VSS provider and requester as DLL Adds VSS provider and requester as a qga-vss.dll, which is loaded by Windows VSS service as well as by qemu-ga. "provider.cpp" implements a basic stub of a software VSS provider. Currently, this module only relays a frozen event from VSS service to the agent, and thaw event from the agent to VSS service, to block VSS process to keep the system frozen while snapshots are taken at the host. To register the provider to the guest system as COM+ application, the type library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl), VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also adds pre-compiled .tlb file in the repository in order to enable cross-compile qemu-ga.exe for Windows with VSS support. "requester.cpp" provides the VSS requester to kick the VSS snapshot process. Qemu-ga.exe works without the DLL, although fsfreeze features are disabled. These functions are only supported in Windows 2003 or later. In older systems, fsfreeze features are disabled. In several versions of Windows which don't support attribute VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error. To solve this fundamentally, we need a framework to handle mount writable snapshot on guests, which is required by VSS auto-recovery feature (cleanup phase after a snapshot is taken). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-08-07 17:40:18 +02:00
rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
rm -f fsdev/*.pod scsi/*.pod
rm -f qemu-img-cmds.h
rm -f ui/shader/*-vert.h ui/shader/*-frag.h
@# May not be present in GENERATED_FILES
rm -f trace/generated-tracers-dtrace.dtrace*
rm -f trace/generated-tracers-dtrace.h*
rm -f $(foreach f,$(GENERATED_FILES),$(f) $(f)-timestamp)
rm -f qapi-gen-timestamp
rm -rf qga/qapi-generated
for d in $(ALL_SUBDIRS); do \
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
rm -f $$d/qemu-options.def; \
done
Remove config-devices.mak on 'make clean' Our dependency mechanism works like this: * on first build there is neither a .o nor a .d * we create the .d as a side effect of creating the .o * for rebuilds we know when we need to update the .o, which also updates the .d This system requires that you're never in a situation where there is a .o file but no .d (because then we will never realise we need to build the .d, and we will not have the dependency information about when to rebuild the .o). This is working fine for our object files, but we also try to use it for $TARGET/config-devices.mak (where the dependency file is in $TARGET-config-devices.mak.d). Unfortunately "make clean" doesn't remove config-devices.mak, which means that it puts us in the forbidden situation of "object file exists but not its .d file". This in turn means that we will fail to notice when we need to rebuild: mkdir build/depbug (cd build/depbug && '../../configure') make -C build/depbug -j8 make -C build/depbug clean echo "CONFIG_CANARY = y" >> default-configs/arm-softmmu.mak make -C build/depbug grep CANARY build/depbug/aarch64-softmmu/config-devices.mak The CANARY token should show up in config-devices.mak but does not. Fix this bug by making "make clean" delete the config-devices.mak files. config-all-devices.mak doesn't have the same problem since it has no .d file, but delete it too, since it is created by "make" and logically should be removed by "make clean". (Note that it is important not to remove config-devices.mak until after we have recursively run 'make clean' in the subdirectories.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1463484451-22979-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-17 13:27:31 +02:00
rm -f $(SUBDIR_DEVICES_MAK) config-all-devices.mak
VERSION ?= $(shell cat VERSION)
dist: qemu-$(VERSION).tar.bz2
qemu-%.tar.bz2:
$(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi qemu-monitor-info.texi
rm -f config-all-devices.mak config-all-disas.mak config.status
rm -f po/*.mo tests/qemu-iotests/common.env
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps
rm -f qemu-doc.fn qemu-doc.fns qemu-doc.info qemu-doc.ky qemu-doc.kys
rm -f qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp
rm -f qemu-doc.vr qemu-doc.txt
rm -f config.log
rm -f linux-headers/asm
rm -f docs/version.texi
rm -f docs/interop/qemu-ga-qapi.texi docs/interop/qemu-qmp-qapi.texi
rm -f docs/interop/qemu-qmp-ref.7 docs/interop/qemu-ga-ref.7
rm -f docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
rm -f docs/qemu-block-drivers.7
for d in $(TARGET_LIST); do \
rm -rf $$d || exit 1 ; \
done
rm -Rf .sdk
if test -f dtc/version_gen.h; then $(MAKE) $(DTC_MAKE_ARGS) clean; fi
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
ar de en-us fi fr-be hr it lv nl pl ru th \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr \
bepo cz
ifdef INSTALL_BLOBS
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
efi-e1000e.rom efi-vmxnet3.rom \
qemu-icon.bmp qemu_logo_no_text.svg \
bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
s390-ccw.img s390-netboot.img \
spapr-rtas.bin slof.bin skiboot.lid \
palcode-clipper \
u-boot.e500 u-boot-sam460-20100605.bin \
qemu_vga.ndrv \
hppa-firmware.img
else
BLOBS=
endif
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) qemu-doc.html "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) qemu-doc.txt "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.html "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.txt "$(DESTDIR)$(qemu_docdir)"
ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
ifneq ($(TOOLS),)
$(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
ifneq (,$(findstring qemu-ga,$(TOOLS)))
$(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7"
endif
endif
ifdef CONFIG_VIRTFS
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
endif
install-datadir:
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
install-localstatedir:
ifdef CONFIG_POSIX
ifneq (,$(findstring qemu-ga,$(TOOLS)))
$(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
endif
endif
install: all $(if $(BUILD_DOCS),install-doc) install-datadir install-localstatedir
ifneq ($(TOOLS),)
$(call install-prog,$(subst qemu-ga,qemu-ga$(EXESUF),$(TOOLS)),$(DESTDIR)$(bindir))
endif
ifneq ($(CONFIG_MODULES),)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
for s in $(modules-m:.mo=$(DSOSUF)); do \
t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
$(INSTALL_LIB) $$s "$$t"; \
test -z "$(STRIP)" || $(STRIP) "$$t"; \
done
endif
ifneq ($(HELPERS-y),)
$(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir))
endif
ifneq ($(BLOBS),)
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
done
endif
ifdef CONFIG_GTK
$(MAKE) -C po $@
endif
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
done
$(INSTALL_DATA) $(BUILD_DIR)/trace-events-all "$(DESTDIR)$(qemu_datadir)/trace-events-all"
for d in $(TARGET_LIST); do \
$(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
done
.PHONY: ctags
ctags:
rm -f tags
find "$(SRC_PATH)" -name '*.[hc]' -exec ctags --append {} +
.PHONY: TAGS
TAGS:
rm -f TAGS
find "$(SRC_PATH)" -name '*.[hc]' -exec etags --append {} +
cscope:
rm -f "$(SRC_PATH)"/cscope.*
find "$(SRC_PATH)/" -name "*.[chsS]" -print | sed 's,^\./,,' > "$(SRC_PATH)/cscope.files"
cscope -b -i"$(SRC_PATH)/cscope.files"
# opengl shader programs
ui/shader/%-vert.h: $(SRC_PATH)/ui/shader/%.vert $(SRC_PATH)/scripts/shaderinclude.pl
@mkdir -p $(dir $@)
$(call quiet-command,\
perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
"VERT","$@")
ui/shader/%-frag.h: $(SRC_PATH)/ui/shader/%.frag $(SRC_PATH)/scripts/shaderinclude.pl
@mkdir -p $(dir $@)
$(call quiet-command,\
perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
"FRAG","$@")
ui/shader.o: $(SRC_PATH)/ui/shader.c \
ui/shader/texture-blit-vert.h \
ui/shader/texture-blit-flip-vert.h \
ui/shader/texture-blit-frag.h
# documentation
MAKEINFO=makeinfo
MAKEINFOINCLUDES= -I docs -I $(<D) -I $(@D)
MAKEINFOFLAGS=--no-split --number-sections $(MAKEINFOINCLUDES)
TEXI2PODFLAGS=$(MAKEINFOINCLUDES) "-DVERSION=$(VERSION)"
TEXI2PDFFLAGS=$(if $(V),,--quiet) -I $(SRC_PATH) $(MAKEINFOINCLUDES)
docs/version.texi: $(SRC_PATH)/VERSION
$(call quiet-command,echo "@set VERSION $(VERSION)" > $@,"GEN","$@")
%.html: %.texi docs/version.texi
$(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
--html $< -o $@,"GEN","$@")
%.info: %.texi docs/version.texi
$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) $< -o $@,"GEN","$@")
%.txt: %.texi docs/version.texi
$(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
--plaintext $< -o $@,"GEN","$@")
%.pdf: %.texi docs/version.texi
$(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@")
qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi
@cp -p $< $@
docs/interop/qemu-ga-qapi.texi: qga/qapi-generated/qga-qapi-doc.texi
@cp -p $< $@
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi qemu-monitor-info.texi
qemu.1: qemu-option-trace.texi
qemu-img.1: qemu-img.texi qemu-option-trace.texi qemu-img-cmds.texi
fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
qemu-nbd.8: qemu-nbd.texi qemu-option-trace.texi
qemu-ga.8: qemu-ga.texi
docs/qemu-block-drivers.7: docs/qemu-block-drivers.texi
html: qemu-doc.html docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
info: qemu-doc.info docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info
pdf: qemu-doc.pdf docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
txt: qemu-doc.txt docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
qemu-doc.html qemu-doc.info qemu-doc.pdf qemu-doc.txt: \
qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-option-trace.texi \
qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \
qemu-monitor-info.texi docs/qemu-block-drivers.texi
docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \
docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \
docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7: \
docs/interop/qemu-ga-ref.texi docs/interop/qemu-ga-qapi.texi
docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \
docs/interop/qemu-qmp-ref.info docs/interop/qemu-qmp-ref.pdf \
docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \
docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi
ifdef CONFIG_WIN32
INSTALLER = qemu-setup-$(VERSION)$(EXESUF)
nsisflags = -V2 -NOCD
ifneq ($(wildcard $(SRC_PATH)/dll),)
ifeq ($(ARCH),x86_64)
# 64 bit executables
DLL_PATH = $(SRC_PATH)/dll/w64
nsisflags += -DW64
else
# 32 bit executables
DLL_PATH = $(SRC_PATH)/dll/w32
endif
endif
.PHONY: installer
installer: $(INSTALLER)
INSTDIR=/tmp/qemu-nsis
$(INSTALLER): $(SRC_PATH)/qemu.nsi
$(MAKE) install prefix=${INSTDIR}
ifdef SIGNCODE
(cd ${INSTDIR}; \
for i in *.exe; do \
$(SIGNCODE) $${i}; \
done \
)
endif # SIGNCODE
(cd ${INSTDIR}; \
for i in qemu-system-*.exe; do \
arch=$${i%.exe}; \
arch=$${arch#qemu-system-}; \
echo Section \"$$arch\" Section_$$arch; \
echo SetOutPath \"\$$INSTDIR\"; \
echo File \"\$${BINDIR}\\$$i\"; \
echo SectionEnd; \
done \
) >${INSTDIR}/system-emulations.nsh
makensis $(nsisflags) \
$(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
$(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
-DBINDIR="${INSTDIR}" \
$(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
-DSRCDIR="$(SRC_PATH)" \
-DOUTFILE="$(INSTALLER)" \
-DDISPLAYVERSION="$(VERSION)" \
$(SRC_PATH)/qemu.nsi
rm -r ${INSTDIR}
ifdef SIGNCODE
$(SIGNCODE) $(INSTALLER)
endif # SIGNCODE
endif # CONFIG_WIN
# Add a dependency on the generated files, so that they are always
# rebuilt before other object files
ifneq ($(wildcard config-host.mak),)
ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
Makefile: $(GENERATED_FILES)
endif
endif
.SECONDARY: $(TRACE_HEADERS) $(TRACE_HEADERS:%=%-timestamp) \
$(TRACE_SOURCES) $(TRACE_SOURCES:%=%-timestamp) \
$(TRACE_DTRACE) $(TRACE_DTRACE:%=%-timestamp)
# Include automatically generated dependency files
# Dependencies in Makefile.objs files come from our recursive subdir rules
-include $(wildcard *.d tests/*.d)
include $(SRC_PATH)/tests/docker/Makefile.include
include $(SRC_PATH)/tests/vm/Makefile.include
.PHONY: help
help:
@echo 'Generic targets:'
@echo ' all - Build all'
ifdef CONFIG_MODULES
@echo ' modules - Build all modules'
endif
@echo ' dir/file.o - Build specified target only'
@echo ' install - Install QEMU, documentation and tools'
@echo ' ctags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ''
@$(if $(TARGET_LIST), \
echo 'Architecture specific targets:'; \
$(foreach t, $(TARGET_LIST), \
printf " %-30s - Build for %s\\n" $(patsubst %,subdir-%,$(t)) $(t);) \
echo '')
@echo 'Cleaning targets:'
@echo ' clean - Remove most generated files but keep the config'
@echo ' distclean - Remove all generated files'
@echo ' dist - Build a distributable tarball'
@echo ''
@echo 'Test targets:'
@echo ' check - Run all tests (check-help for details)'
@echo ' docker - Help about targets running tests inside Docker containers'
@echo ' vm-test - Help about targets running tests inside VM'
@echo ''
@echo 'Documentation targets:'
@echo ' html info pdf txt'
@echo ' - Build documentation in specified format'
@echo ''
ifdef CONFIG_WIN32
@echo 'Windows targets:'
@echo ' installer - Build NSIS-based installer for QEMU'
ifdef QEMU_GA_MSI_ENABLED
@echo ' msi - Build MSI-based installer for qemu-ga'
endif
@echo ''
endif
@echo ' $(MAKE) [targets] (quiet build, default)'
@echo ' $(MAKE) V=1 [targets] (verbose build)'