Be careful not to change linux_dirent64, which is a host structure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Be careful not to change linux_dirent64, which is a host structure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These definitions are in sparc/signal.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Untabify and re-indent.
We had a mix of 2, 3, 4, and 8 space indentation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make the PSW look more similar to the real s390x userspace PSW.
Except for being there, the newly added bits should not affect the
userspace code execution.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds the new syscall for the
"RISC-V Hardware Probing Interface"
(https://docs.kernel.org/riscv/hwprobe.html).
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Robbin Ehn <rehn@rivosinc.com>
Message-Id: <06a4543df2aa6101ca9a48f21a3198064b4f1f87.camel@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Make the strace look nicer for those two syscalls.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Linux accept4() syscall allows two flags only: SOCK_NONBLOCK and
SOCK_CLOEXEC, and returns -EINVAL if any other bits have been set.
Change the qemu implementation accordingly, which means we can not use
the fcntl_flags_tbl[] translation table which allows too many other
values.
Beside the correction in behaviour, this actually fixes the accept4()
emulation for hppa, mips and alpha targets for which SOCK_NONBLOCK is
different than TARGET_SOCK_NONBLOCK (aka O_NONBLOCK).
The fix can be verified with the testcase of the debian lwt package,
which hangs forever in a read() syscall without this patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When running a 32-bit guest on a 64-bit host, fcntl[64](F_GETFL) should
return with the TARGET_O_LARGEFILE flag set, because all 64-bit hosts
support large files unconditionally.
But on 64-bit hosts, O_LARGEFILE has the value 0, so the flag
translation can't be done with the fcntl_flags_tbl[]. Instead add the
TARGET_O_LARGEFILE flag afterwards.
Note that for 64-bit guests the compiler will optimize away this code,
since TARGET_O_LARGEFILE is zero.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
/proc/self/smaps is an extension of /proc/self/maps: it provides the
same lines, plus additional information about each range.
GDB uses /proc/self/smaps when available, which means that
generate-core-file tries it first before falling back to
/proc/self/maps. This, in turn, causes it to dump the host mappings,
since /proc/self/smaps is not emulated and is just passed through.
Fix by emulating /proc/self/smaps. Provide true values only for
Size, KernelPageSize, MMUPageSize and VmFlags. Leave all other values
at 0, which is a valid conservative estimate.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-34-alex.bennee@linaro.org>
gdbstub cannot meaningfully handle QEMU_ERESTARTSYS, and it doesn't
need to. Add a parameter to do_guest_openat() that makes it use
openat() instead of safe_openat(), so that it becomes usable from
gdbstub.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-33-alex.bennee@linaro.org>
These functions will be required by the GDB stub in order to provide
the guest view of /proc to GDB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-32-alex.bennee@linaro.org>
There is an overflow problem in mmap_find_vma_reserved:
when reserved_va == UINT32_MAX, end may overflow to 0.
Rather than a larger rewrite at this time, simply avoid
the final byte of the VA, which avoids searching the
final page, which avoids the overflow.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1741
Fixes: 95059f9c ("include/exec: Change reserved_va semantics to last byte")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20230629080835.71371-1-richard.henderson@linaro.org>
32-bit binaries can run on a long mode processor even if the kernel
is 64-bit, of course, and this can have slightly different behavior;
for example, SYSCALL is allowed on Intel processors.
Allow reporting LM to programs running under user mode emulation,
so that "-cpu" can be used with named CPU models even for qemu-i386
and even without disabling LM by hand.
Fortunately, most of the runtime code in QEMU has to depend on HF_LMA_MASK
or on HF_CS64_MASK (which is anyway false for qemu-i386's 32-bit code
segment) rather than TARGET_X86_64, therefore all that is needed is an
update of linux-user's ring 0 setup.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not reverse the order of environment variables in the target environ
array relative to the incoming environ order. Some testsuites depend on a
specific order, even though it is not defined by any standard.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <mvmlejfsivd.fsf@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Given several different concepts are suggested for investigation, let's
not confuse e.g. ulimit's -R with what was actually intended.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As-is the error message can cause some confusion as the mentioned sysctl
attribute name is wrong:
https://www.kernel.org/doc/html/latest/admin-guide/sysctl/vm.html#mmap-min-addr
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Coverity doesn't like the way we might end up calling getgroups()
with a NULL grouplist pointer. This is fine for the special case
of gidsetsize == 0, but we will also do it if the guest passes
us a negative gidsetsize. (CID 1512465)
Explicitly fail the negative gidsetsize with EINVAL, as the kernel
does. This means we definitely only call the libc getgroups()
with valid parameters. It also brings the getgroups() code in
to line with the setgroups() code.
Possibly Coverity may still complain about getgroups(0, NULL), but
that would be a false positive.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are 2 pairs of identical code (with different types)
for TARGET_NR_setgroups & TARGET_NR_setgroups32, and
for TARGET_NR_getgroups & TARGET_NR_getgroups32. Add
comments stating this fact, so that further modifications
are done in two places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is required for implementing /proc/cpuinfo emulation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605113950.1169228-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is required for implementing /proc/cpuinfo emulation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605113950.1169228-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently single-stepping SVC executes two instructions. The reason is
that EXCP_DEBUG for the SVC instruction itself is masked by EXCP_SVC.
Fix by re-raising EXCP_DEBUG.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230510230213.330134-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
=1CyJ
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230518-1' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
Hexagon (linux-user/hexagon): handle breakpoints
Hexagon (gdbstub): add HVX support
Hexagon (gdbstub): fix p3:0 read and write via stub
Hexagon: add core gdbstub xml data for LLDB
gdbstub: add test for untimely stop-reply packets
gdbstub: only send stop-reply packets when allowed to
Remove test_vshuff from hvx_misc tests
Hexagon (decode): look for pkts with multiple insns at the same slot
Hexagon (iclass): update J4_hintjumpr slot constraints
Hexagon: append eflags to unknown cpu model string
Hexagon: list available CPUs with `-cpu help`
Hexagon (target/hexagon/*.py): raise exception on reg parsing error
target/hexagon: fix = vs. == mishap
Hexagon (target/hexagon) Additional instructions handled by idef-parser
Hexagon (target/hexagon) Move items to DisasContext
Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
Hexagon (target/hexagon) Move pred_written to DisasContext
Hexagon (target/hexagon) Move new_pred_value to DisasContext
Hexagon (target/hexagon) Move new_value to DisasContext
Hexagon (target/hexagon) Make special new_value for USR
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This enables LLDB to work with hexagon linux-user mode through the GDB
remote protocol.
Helped-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <c287a129dcbe7d974d8b7608e8672d34a3c91c04.1683214375.git.quic_mathbern@quicinc.com>
Running qemu-hexagon with a binary that was compiled for an arch version
unknown by qemu can produce a somewhat confusing message:
qemu-hexagon: unable to find CPU model 'unknown'
Let's give a bit more info by appending the eflags so that the message
becomes:
qemu-hexagon: unable to find CPU model 'unknown (0x69)'
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <8a8d013cc619b94fd4fb577ae6a8df26cedb972b.1683225804.git.quic_mathbern@quicinc.com>
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"
The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
linux-user getgroups(), setgroups(), getgroups32() and setgroups32()
used alloca() to allocate grouplist arrays, with unchecked gidsetsize
coming from the "guest". With NGROUPS_MAX being 65536 (linux, and it
is common for an application to allocate NGROUPS_MAX for getgroups()),
this means a typical allocation is half the megabyte on the stack.
Which just overflows stack, which leads to immediate SIGSEGV in actual
system getgroups() implementation.
An example of such issue is aptitude, eg
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=811087#72
Cap gidsetsize to NGROUPS_MAX (return EINVAL if it is larger than that),
and use heap allocation for grouplist instead of alloca(). While at it,
fix coding style and make all 4 implementations identical.
Try to not impose random limits - for example, allow gidsetsize to be
negative for getgroups() - just do not allocate negative-sized grouplist
in this case but still do actual getgroups() call. But do not allow
negative gidsetsize for setgroups() since its argument is unsigned.
Capping by NGROUPS_MAX seems a bit arbitrary, - we can do more, it is
not an error if set size will be NGROUPS_MAX+1. But we should not allow
integer overflow for the array being allocated. Maybe it is enough to
just call g_try_new() and return ENOMEM if it fails.
Maybe there's also no need to convert setgroups() since this one is
usually smaller and known beforehand (KERN_NGROUPS_MAX is actually 63, -
this is apparently a kernel-imposed limit for runtime group set).
The patch fixes aptitude segfault mentioned above.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20230409105327.1273372-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If a program requires fr1, we should set the FR bit of CP0 control status
register and add F64 hardware flag. The corresponding `else if` branch
statement is copied from the linux kernel sources (see `arch_check_elf` function
in linux/arch/mips/kernel/elf.c).
Signed-off-by: Daniil Kovalev <dkovalev@compiler-toolchain-for.me>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230404052153.16617-1-dkovalev@compiler-toolchain-for.me>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The kernel does not require PROT_READ for addresses passed to mincore.
For example the fincore(1) tool from util-linux uses PROT_NONE and
currently does not work under qemu-user.
Example (with fincore(1) from util-linux 2.38):
$ fincore /proc/self/exe
RES PAGES SIZE FILE
24K 6 22.1K /proc/self/exe
$ qemu-x86_64 /usr/bin/fincore /proc/self/exe
fincore: failed to do mincore: /proc/self/exe: Cannot allocate memory
With this patch:
$ ./build/qemu-x86_64 /usr/bin/fincore /proc/self/exe
RES PAGES SIZE FILE
24K 6 22.1K /proc/self/exe
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230422100314.1650-3-thomas@t-8ch.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This can be used to validate that an address range is mapped but without
being readable or writable.
It will be used by an updated implementation of mincore().
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230422100314.1650-2-thomas@t-8ch.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This way we can get rid of the if'deffery and the XXX comment
here (it's repeated in the list_cpus() function anyway).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230424122126.236586-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230424153429.276788-2-thomas@t-8ch.de>
[lv: move declaration at the beginning of the block,
define syscall]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The correct error number for unknown ioctls is ENOTTY.
ENOSYS would mean that the ioctl() syscall itself is not implemented,
which is very improbable and unexpected for userspace.
ENOTTY means "Inappropriate ioctl for device". This is what the kernel
returns on unknown ioctls, what qemu is trying to express and what
userspace is prepared to handle.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230426070659.80649-1-thomas@t-8ch.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
RISC-V does not expose all extensions via hwcaps, thus some userspace
applications may want to query these via /proc/cpuinfo.
Currently when querying this file the host's file is shown instead
which is slightly confusing. Emulate a basic /proc/cpuinfo file
with mmu info and an ISA string.
Signed-off-by: Afonso Bordado <afonsobordado@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <167873059442.9885.15152085316575248452-0@git.sr.ht>
[lv: removed the test that fails in CI for unknown reason]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Expose qemu_cpu_list_lock globally so that we can use
WITH_QEMU_LOCK_GUARD and QEMU_LOCK_GUARD to simplify a few code paths
now and in future.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-2-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use uint64_t for the pc, and size_t for the size.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-2-gaosong@loongson.cn>
The bits in cr reg are grouped into eight 4-bit fields represented
by env->crf[8] and the related calculations should be abstracted to
keep the calling routines simpler to read. This is a step towards
cleaning up the related/calling code for better readability.
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503093619.2530487-2-harshpb@linux.ibm.com>
[danielhb: add 'const' modifier to fix linux-user build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The '-singlestep' option is confusing, because it doesn't actually
have anything to do with single-stepping the CPU. What it does do
is force TCG emulation to put one guest instruction in each TB,
which can be useful in some situations.
Create a new command line argument -one-insn-per-tb, so we can
document that -singlestep is just a deprecated synonym for it,
and eventually perhaps drop it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-5-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This commit adds 'one-insn-per-tb' as a property on the TCG
accelerator object, so you can enable it with
-accel tcg,one-insn-per-tb=on
It has the same behaviour as the existing '-singlestep' command line
option. We use a different name because 'singlestep' has always been
a confusing choice, because it doesn't have anything to do with
single-stepping the CPU. What it does do is force TCG emulation to
put one guest instruction in each TB, which can be useful in some
situations (such as analysing debug logs).
The existing '-singlestep' commandline options are decoupled from the
global 'singlestep' variable and instead now are syntactic sugar for
setting the accel property. (These can then go away after a
deprecation period.)
The global variable remains for the moment as:
* what the TCG code looks at to change its behaviour
* what HMP and QMP use to query and set the behaviour
In the following commits we'll clean those up to not directly
look at the global variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230417164041.684562-2-peter.maydell@linaro.org
This reverts commit 4f5c67f8df.
This exposes bugs in target_mmap et al with respect to overflow
with the final page of the guest address space. To be fixed in
the next development cycle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Per the release 6.06 revision history:
5.03 August 21, 2013
• ABS2008 and NAN2008 fields of Table 5.7 “FCSR RegisterField
Descriptions” were optional in release 3 and could be R/W,
but as of release 5 are required, read-only, and preset by
hardware.
The P5600 core implements the release 5, and has the ABS2008
and NAN2008 bits set in CP1_fcr31. Therefore it is able to run
ELF binaries compiled with EF_MIPS_NAN2008, such the CIP United
Debian NaN2008 distribution:
http://repo.oss.cipunited.com/mipsel-nan2008/README.txt
In order to run such compiled binaries, select by default the
P5600 core when the ELF 'MIPS_NAN2008' flag is set.
Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230327162444.388-1-philmd@linaro.org>
The 64-bit SPARC V9 syscall ABI uses 32-bit UIDs. Only enable
the 16-bit UID wrappers for 32-bit SPARC (V7 and V8).
Possibly missed in commit 992f48a036 ("Support for 32 bit
ABI on 64 bit targets (only enabled Sparc64)").
Reported-by: Gregor Riepl <onitake@gmail.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Zach van Rijn <me@zv.io>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1394
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230327131910.78564-1-philmd@linaro.org>
User setting of -R reserved_va can lead to an assertion
failure in page_set_flags. Sanity check the value of
reserved_va and print an error message instead. Do not
allocate a commpage at all for m-profile cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the semantics to be the last byte of the guest va, rather
than the following byte. This avoids some overflow conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte of the image, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1528
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been enforcing host page alignment for the non-R
fallback of MAX_RESERVED_VA, but failing to enforce for -R.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
On linux user mode, CPUX86State::gdt::base from Different CPUX86State
Objects have same value, It is incorrect! Every CPUX86State::gdt::base
Must points to independent memory space.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1405
Signed-off-by: fanwenjie <fanwj@mail.ustc.edu.cn>
Message-Id: <4172b90.58b08.18631b77860.Coremail.fanwj@mail.ustc.edu.cn>
[lv: remove unnecessary casts, split overlong line]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This trap is raised by taddcctv and tsubcctv insns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Raise SIGFPE for ieee exceptions.
The other types, such as FSR_FTT_UNIMPFPOP, should not appear,
because we enable normal emulation of missing insns at the
start of sparc_cpu_realizefn().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For sparc64, TT_UNIMP_FLUSH == TT_ILL_INSN, so this is
already handled. For sparc32, the kernel uses SKIP_TRAP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since qemu does not implement a sparc coprocessor, all such
instructions raise this trap. Because of that, we never raise
the coprocessor exception trap, which would be vector 0x28.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is raised by using an %asi < 0x80 in user-mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For the most part priviledged opcodes are ifdefed out of the
user-only sparc translator, which will then incorrectly produce
illegal opcode traps. But there are some code paths that
properly raise TT_PRIV_INSN, so we must handle it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These are really only meaningful for sparc32, but they're
still present for backward compatibility for sparc64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In addition to the hw trap vector, there is a software trap
assigned for older sparc without hw division instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is 'ta 1' for both v9 and pre-v9.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These traps are present for sparc64 with ilp32, aka sparc32plus.
Enabling them means adjusting the defines over in signal.c,
and fixing an incorrect usage of abi_ulong when we really meant
the full register, target_ulong.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add some macros to localize the hw difference between v9 and pre-v9.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230216054516.1267305-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The v9 and pre-v9 code can be unified with this macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230216054516.1267305-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use TT_TRAP.
For sparc32, 0x88 is the "Slowaris" system call, currently BAD_TRAP
in the kernel's ttable_32.S. For sparc64, 0x110 is tl0_linux32, the
sparc32 trap, now folded into the TARGET_ABI32 case via TT_TRAP.
For sparc64, there does still exist trap 0x111 as tl0_oldlinux64,
which was replaced by 0x16d as tl0_linux64 in 1998. Since no one
has noticed, don't bother implementing it now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230216054516.1267305-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add emulation for the CLONE_PIDFD flag of the clone() syscall.
This flag was added in Linux kernel 5.2.
Successfully tested on a x86-64 Linux host with hppa-linux target.
Can be verified by running the testsuite of the qcoro debian package,
which breaks hard and kills the currently logged-in user without this
patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y4XoJCpvUA1JD7Sj@p100>
[lv: define CLONE_PIDFD if it is not]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
msync() uses the flags MS_ASYNC, MS_INVALIDATE and MS_SYNC, which differ
between platforms, specifcally on alpha and hppa.
Add a target to host translation for those and wire up a nicer strace
output.
This fixes the testsuite of the macaulay2 debian package with a hppa-linux
guest on a x86-64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y5rMcts4qe15RaVN@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Newer kernel versions require this flag to be present contrary to older
ones. Depending on the libnl version it is added or not.
Typically when using rtnl_link_inet6_set_addr_gen_mode, the netlink
packet generated may contain the following attribute:
with libnl 3.4
{nla_len=16, nla_type=IFLA_AF_SPEC},
[
{nla_len=12, nla_type=AF_INET6},
[{nla_len=5, nla_type=IFLA_INET6_ADDR_GEN_MODE}, IN6_ADDR_GEN_MODE_NONE]
]
with libnl 3.7
{nla_len=16, nla_type=NLA_F_NESTED|IFLA_AF_SPEC},
[
{nla_len=12, nla_type=NLA_F_NESTED|AF_INET6},
[{nla_len=5, nla_type=IFLA_INET6_ADDR_GEN_MODE}, IN6_ADDR_GEN_MODE_NONE]]
]
Masking the type is likely needed in other places. Only the above cases
are implemented in this patch.
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230307154256.101528-3-Mathis.Marion@silabs.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The sin6_scope_id field uses the host byte order, so there is a
conversion to be made when host and target endianness differ.
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230307154256.101528-2-Mathis.Marion@silabs.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add a new function print_raw_param64() to print 64-bit values in the
same way as print_raw_param(). This prevents that qemu_log() is used to
work around the problem that print_raw_param() can only print 32-bit
values when compiled for 32-bit targets.
Additionally convert the existing 64-bit users in print_timespec64(),
print_rlimit64() and print_preadwrite64() over to this new function and
drop some unneccessary spaces.
Suggested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9lNbFNyRSUhhrHa@p100>
[lvivier: remove print_preadwrite64 and print_rlimit64 part]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current brk() implementation does not de-allocate pages if a lower
address is given compared to earlier brk() calls.
But according to the manpage, brk() shall deallocate memory in this case
and currently it breaks a real-world application, specifically building
the debian gcl package in qemu-user.
Fix this issue by reworking the qemu brk() implementation.
Tested with the C-code testcase included in qemu commit 4d1de87c75, and
by building debian package of gcl in a hppa-linux guest on a x86-64
host.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <Y6gId80ek49TK1xB@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some programs want to match an actual task state character.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmedq2kxoe.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Define xtensa-specific info_is_fdpic and fill in FDPIC-specific
registers in the xtensa version of init_thread.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230205061230.544451-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
target_rlimit64 contains uint64_t fields, so it's 8-byte aligned on
some hosts, while some guests may align their respective type on a
4-byte boundary. This may lead to an unaligned access, which is an UB.
Fix by defining the fields as abi_ullong. This makes the host alignment
match that of the guest, and lets the compiler know that it should emit
code that can deal with the guest alignment.
While at it, also use __get_user() and __put_user() instead of
tswap64().
Fixes: 163a05a839 ("linux-user: Implement prlimit64 syscall")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230224003907.263914-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When reading the expiration count from a timerfd, the endianness of the
64bit value read is the one of the host, just as for eventfds.
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230220085822.626798-2-Mathis.Marion@silabs.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When accsssing /proc/self/exe from a userspace program, linux-user tries
to resolve the name via realpath(), which may fail if the process
changed the working directory in the meantime.
An example:
- a userspace program ist started with ./testprogram
- the program runs chdir("/tmp")
- then the program calls readlink("/proc/self/exe")
- linux-user tries to run realpath("./testprogram") which fails
because ./testprogram isn't in /tmp
- readlink() will return -ENOENT back to the program
Avoid this issue by resolving the full path name of the started process
at startup of linux-user and store it in real_exec_path[]. This then
simplifies the emulation of readlink() and readlinkat() as well, because
they can simply copy the path string to userspace.
I noticed this bug because the testsuite of the debian package "pandoc"
failed on linux-user while it succeeded on real hardware. The full log
is here:
https://buildd.debian.org/status/fetch.php?pkg=pandoc&arch=hppa&ver=2.17.1.1-1.1%2Bb1&stamp=1670153210&raw=0
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221205113825.20615-1-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.
I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
Follow what kernel's full_exception() is doing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
fork()ed processes currently start with
current_cpu->in_exclusive_context set, which is, strictly speaking, not
correct, but does not cause problems (even assertion failures).
With one of the next patches, the code begins to rely on this value, so
fix it by always calling end_exclusive() in fork_end().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The linux kernel's trap tables vector all unassigned trap
numbers to BAD_TRAP, which then raises SIGILL.
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Applications do call sendmsg() without any IOV, e.g.:
sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=NULL, msg_iovlen=0,
msg_control=[{cmsg_len=36, cmsg_level=SOL_ALG, cmsg_type=0x2}],
msg_controllen=40, msg_flags=0}, MSG_MORE) = 0
sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="The quick brown fox jumps over t"..., iov_len=183}],
msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_ALG, cmsg_type=0x3}],
msg_controllen=24, msg_flags=0}, 0) = 183
The function do_sendrecvmsg_locked() is used for sndmsg() and recvmsg()
and calls lock_iovec() to lock the IOV into memory. For the first
sendmsg() above it returns NULL and thus wrongly skips the call the host
sendmsg() syscall, which will break the calling application.
Fix this issue by:
- allowing sendmsg() even with empty IOV
- skip recvmsg() if IOV is NULL
- skip both if the return code of do_sendrecvmsg_locked() != 0, which
indicates some failure like EFAULT on the IOV
Tested with the debian "ell" package with hppa guest on x86_64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221212173416.90590-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add suport to handle SOL_ALG packets via sendmsg() and recvmsg().
This allows emulated userspace to use encryption functionality.
Tested with the debian ell package with hppa guest on x86_64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221212173416.90590-1-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Both parameters have a different value on the parisc platform, so first
translate the target value into a host value for usage in the native
madvise() syscall.
Those parameters are often used by security sensitive applications (e.g.
tor browser, boringssl, ...) which expect the call to return a proper
return code on failure, so return -EINVAL if qemu fails to forward the
syscall to the host OS.
While touching this code, enhance the comments about MADV_DONTNEED.
Tested with testcase of tor browser when running hppa-linux guest on
x86-64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y5iwTaydU7i66K/i@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make the strace look nicer for those two syscalls.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9QxskymWJjrKQmT@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa architectures provides an own output for the emulated
/proc/cpuinfo file.
Some userspace applications count (even if that's not the recommended
way) the number of lines which start with "processor:" and assume that
this number then reflects the number of online CPUs. Since those 3
architectures don't provide any such line, applications may assume "0"
CPUs. One such issue can be seen in debian bug report:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1024653
Avoid such issues by adding a "processor:" line for each of the online
CPUs.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9QvyRSq1I1k5/JW@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add translation for the host error return code of:
getsockopt(19, SOL_SOCKET, SO_ERROR, [ECONNREFUSED], [4]) = 0
This fixes the testsuite of the cockpit debian package with a
hppa-linux guest on a x86-64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9QzNzXg0hrzHQeo@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This makes target_flat.h behave like every other target_xxx.h header.
It also makes it actually work -- while the current header says adding
a header to the target subdir overrides the common one, it doesn't.
This is for two reasons:
* meson.build adds -Ilinux-user before -Ilinux-user/$arch
* the compiler search path for "target_flat.h" looks in the same dir
as the source file before searching -I paths.
This can be seen with the xtensa port -- the subdir settings aren't
used which breaks stack setup.
Move it to the generic/ subdir and add include stubs like every
other target_xxx.h header is handled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230129004625.11228-1-vapier@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reverts commit 3cd3df2a95.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reverts commit c5495f4ecb.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently, qemu strace only prints four protocol contants. This patch
adds others listed in "linux/netlink.h".
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Message-Id: <20230101141105.12024-1-fantasquex@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reinstates commit 52f0c1607671293afcdb2acc2f83e9bccbfa74bb:
While forcing the CPU to unrealize by hand does trigger the clean-up
code we never fully free resources because refcount never reaches
zero. This is because QOM automatically added objects without an
explicit parent to /unattached/, incrementing the refcount.
Instead of manually triggering unrealization just unparent the object
and let the device machinery deal with that for us.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/866
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220811151413.3350684-2-alex.bennee@linaro.org>
The original patch tickled a problem in target/arm, and was reverted.
But that problem is fixed as of commit 3b07a936d3.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124201019.3935934-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
execve() is a particular case of execveat(). In order
to add do_execveat(), first factor do_execve() out.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Message-Id: <20221104081015.706009-1-sir@cmpwn.com>
[PMD: Split of bigger patch, filled description, fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221104173632.1052-5-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to add print_execveat() which re-use common code from
print_execve(), extract print_execve_argv() from it.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Message-Id: <20221104081015.706009-1-sir@cmpwn.com>
[PMD: Split of bigger patch, filled description, fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221104173632.1052-3-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This commit re-enables ppc32 as a linux-user host,
as existance of the directory is noted by configure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1097
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220729172141.1789105-3-richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When exiting due to an exit() syscall, qemu-user calls
preexit_cleanup(), but this is currently not the case when exiting due
to a signal. This leads to various buffers not being flushed (e.g.,
for gprof, for gcov, and for the upcoming perf support).
Add the missing call.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112152013.125680-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch fixes the issue originally reported in
this thread:
https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html
The root cause of the issue is a bug in the hexagon specific
logic for saving & restoring context during signal delivery.
The CPU state has two different representations for the
predicate registers. The current logic saves & restores only
the aliased HEX_REG_P3_O register, which is part of env->gpr[]
field in the CPU state, but not the individual byte-level
predicate registers (pO, p1, p2, p3) backed by env->pred[].
Since all predicated instructions refer only to the
indiviual registers, switching to and back from a signal handler
can clobber these registers if the signal handler writes to them
causing the normal application code to behave unpredictably when
context is restored.
In the reported issue with the 'signals' test, since the updated
hexagon toolchain had built musl with -O2, the functions called
from non_trivial_free were inlined. This meant that the code
emitted reused predicate P0 computed in the entry translation
block of the function non_trivial_free in one of the child TB
as part of an assertion. Since P0 is clobbered by the signal
handler in the signals test, the assertion in non_trivial_free
fails incorectly. Since musl for hexagon implements the 'abort'
function by deliberately writing to memory via null pointer,
this causes the test to fail with segmentation fault.
This patch modifies the signal context save & restore logic
to include the individual p0, p1, p2, p3 and excludes the
32b p3_0 register since its value is derived from the former
registers. It also adds a new test case that reliabily
reproduces the issue for all four predicate registers.
Buglink: https://github.com/quic/toolchain_for_hexagon/issues/6
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-2-quic_mthiyaga@quicinc.com>
It's possible that a message contains both normal payload and ancillary
data in the same message, and even if no ancillary data is available
this information should be passed to the target, otherwise the target
cmsghdr will be left uninitialized and the target is going to access
uninitialized memory if it expects cmsg.
Always call the function that translate cmsg when recvmsg, because that
function should be empty-cmsg-safe (it creates an empty cmsg in the
target).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221028081220.1604244-1-uwu@icenowy.me>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The glibc on the hppa platform uses the "iitlbp %r0,(%sr0, %r0)"
assembler instruction as ABORT_INSTRUCTION.
If this (in userspace context) illegal assembler statement is found,
dump the registers and report the failure to userspace the same way as
the Linux kernel on physical hardware.
For other illegal instructions report TARGET_ILL_ILLOPC instead of
TARGET_ILL_ILLOPN as si_code.
Additionally add the missing EXCP_BREAK exception handler which occurs
when the "break x,y" assembler instruction is executed and report
EXCP_ASSIST traps.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <Y1osHVsylkuZNUnY@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf7130851, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the emulation stops with a hard exception it's very useful for
debugging purposes to dump the current guest memory layout (for an
example see /proc/self/maps) beside the CPU registers.
The open_self_maps() function provides such a memory dump, but since
it's located in the syscall.c file, various changes (add #includes, make
this function externally visible, ...) are needed to be able to call it
from the existing EXCP_DUMP() macro.
This patch takes another approach by re-defining EXCP_DUMP() to call
target_exception_dump(), which is in syscall.c, consolidates the log
print functions and allows to add the call to dump the memory layout.
Beside a reduced code footprint, this approach keeps the changes across
the various callers minimal, and keeps EXCP_DUMP() highlighted as
important macro/function.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y1bzAWbw07WBKPxw@p100>
[lv: remove pc declaration and setting]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
User space has been preferring this syscall for a while, due to its
closer match with C semantics, and newer platforms such as LoongArch
apparently have libc implementations that don't fallback to faccessat
so normal access checks are failing without the emulation in place.
Tested by successfully emerging several packages within a Gentoo loong
stage3 chroot, emulated on amd64 with help of static qemu-loongarch64.
Reported-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Message-Id: <20221009060813.2289077-1-xen0n@gentoo.org>
[lv: removing defined(__NR_faccessat2) in syscall.c,
adding defined(TARGET_NR_faccessat2) on print_faccessat()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These ioctls have been defined in linux/fs.h for a long time
* BLKGETSIZE64 - <2.6.12 (linux.git epoch)
* BLKDISCARD - 2.6.28 (d30a2605be9d5132d95944916e8f578fcfe4f976)
* BLKIOMIN - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKIOOPT - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKALIGNOFF - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKPBSZGET - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKDISCARDZEROES - 2.6.32 (98262f2762f0067375f83824d81ea929e37e6bfe)
* BLKSECDISCARD - 2.6.36 (8d57a98ccd0b4489003473979da8f5a1363ba7a3)
* BLKROTATIONAL - 3.2 (ef00f59c95fe6e002e7c6e3663cdea65e253f4cc)
* BLKZEROOUT - 3.6 (66ba32dc167202c3cf8c86806581a9393ec7f488)
* FIBMAP - <2.6.12 (linux.git epoch)
* FIGETBSZ - <2.6.12 (linux.git epoch)
and when building with latest glibc, we'll see compat definitions
in syscall.c anyway thanks to the previous patch. Thus we can
assume they always exist and remove the conditional checks.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221004093206.652431-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GLibc changes prevent us from including linux/fs.h anymore,
and we previously adjusted to this in
commit 3cd3df2a95
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Aug 2 12:41:34 2022 -0400
linux-user: fix compat with glibc >= 2.36 sys/mount.h
That change required adding compat ioctl definitions on the
QEMU side for any ioctls that we would otherwise obtain
from linux/fs.h. This commit adds more that were initially
missed, due to their usage being conditionalized in QEMU.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221004093206.652431-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
AT_EXECFD gives access to the binary file even if
it is not readable (only executable).
Moreover it can be opened with flags and mode that are not the ones
provided by do_openat() caller.
And it is not available because loader_exec() has closed it.
To avoid that, use only safe_openat() with the exec_path.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927124357.688536-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If path is /proc/self/exe, use the executable path
provided by exec_path.
Don't use execfd as it is closed by loader_exec() and otherwise
will survive to the exec() syscall and be usable child process.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927124357.688536-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit 80f0fe3a85 ("linux-user: Fix syscall parameter handling for
MIPS n32") the ABI problem regarding offset64 on MIPS n32 was fixed,
but still some cases remain where the n32 is incorrectly treated as any
other 32-bit ABI that passes 64-bit arguments in pairs of GPRs. Fix by
excluding TARGET_ABI_MIPSN32 from various TARGET_ABI_BITS == 32 checks.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1238
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006085500.290341-1-xen0n@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously the 32-bit version was incorrectly chosen, leading to funny
but incorrect output from e.g. df(1). Simply select the version
corresponding to the 64-bit asm-generic definition.
For reference, this program should produce the same output no matter
natively compiled or not, for loongarch64 or not:
```c
#include <stdio.h>
#include <sys/statfs.h>
int main(int argc, const char *argv[])
{
struct statfs b;
if (statfs(argv[0], &b))
return 1;
printf("f_type = 0x%lx\n", b.f_type);
printf("f_bsize = %ld\n", b.f_bsize);
printf("f_blocks = %ld\n", b.f_blocks);
printf("f_bfree = %ld\n", b.f_bfree);
printf("f_bavail = %ld\n", b.f_bavail);
return 0;
}
// Example output on my amd64 box, with the test binary residing on a
// btrfs partition.
// Native and emulated output after the fix:
//
// f_type = 0x9123683e
// f_bsize = 4096
// f_blocks = 268435456
// f_bfree = 168406890
// f_bavail = 168355058
// Output before the fix, note the messed layout:
//
// f_type = 0x10009123683e
// f_bsize = 723302085239504896
// f_blocks = 168355058
// f_bfree = 2250817541779750912
// f_bavail = 1099229433104
```
Fixes: 1f63019632 ("linux-user: Add LoongArch syscall support")
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006100710.427252-1-xen0n@gentoo.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add support for saving/restoring extended save states when signals
are delivered. This allows using AVX, MPX or PKRU registers in
signal handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux can use FXSAVE to save/restore XMM registers even on 32-bit
systems. This requires some care in order to keep the FXSAVE area
aligned to 16 bytes; for this reason, get_sigframe is changed to
pass the offset into the FXSAVE area rather than the full frame
size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent versions of Linux moved the 32-bit fpstate towards the end of the
frame, so that the variable-sized xsave data does not overwrite the
(ABI-defined) extramask[] field. Follow suit in QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
The value previously chosen overlaps GUSA_MASK.
Rename all DELAY_SLOT_* and GUSA_* defines to emphasize
that they are included in TB_FLAGs. Add aliases for the
FPSCR and SR bits that are included in TB_FLAGS, so that
we don't accidentally reassign those bits.
Fixes: 4da06fb306 ("target/sh4: Implement prctl_unalign_sigbus")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/856
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson
Ilya Leoshkevich
Robbin Ehn
Helge Deller
Paolo Bonzini
Andreas Schwab
Andrew Jeffery
Peter Maydell
Michael Tokarev
Matheus Tavares Bernardino
Taylor Simpson
Daniil Kovalev
Thomas Weißschuh
Thomas Huth
Afonso Bordado
Jamie Iles
Song Gao
Harsh Prateek Bora
Philippe Mathieu-Daudé
fanwj@mail.ustc.edu.cn
Mathis Marion
Max Filippov
Alex Bennée
Mike Frysinger
Daniel P. Berrangé
Letu Ren
Drew DeVault
Mukilan Thiyagarajan
Markus Armbruster
Icenowy Zheng
Stefan Hajnoczi
WANG Xuerui
Laurent Vivier