The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
Coverity warnings CID 1385146, 1385148 1385149 and 1385150 point that
xtensa_opcode_num_operands and xtensa_format_num_slots may return -1
even when xtensa_opcode_decode and xtensa_format_decode succeed. In that
case unsigned counters used to iterate through operands/slots will not
do the right thing.
Make counters and loop bounds signed to fix the warnings.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The sample_controller core is a simple noMMU general purpose core, modern
analog of de212. It is used as a default core in the xtensa port of
Zephyr.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Define default core for noMMU configurations and use that core as
machine default with noMMU XTFPGA machines.
This is done to avoid offering non-working configuration (MMU core on a
noMMU machine) as a default.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some older versions of gcc complain if a typedef is defined twice:
target/xtensa/translate.c:81: error: redefinition of typedef 'DisasContext'
target/xtensa/cpu.h:339: note: previous declaration of 'DisasContext' was here
Remove the now-redundant typedef from the definition of the struct in
translate.c.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1515762528-22818-1-git-send-email-peter.maydell@linaro.org
DE212 is a noMMU core supported in linux. Import this core to provide
true noMMU configuration for xtensa linux to run on QEMU.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
const16 is an opcode that shifts 16 lower bits of an address register
to the 16 upper bits and puts its immediate operand into the lower 16
bits. It is not controlled by an Xtensa option and doesn't have a fixed
opcode.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
GPIO32 is not in the core ISA, but it was widely used in Diamond Cores.
This implementation doesn't do actual I/O and doesn't handle the case of
GPIO32 state being a part of coprocessor.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add two special registers: MMID and DDR:
- MMID is write-only and the only side effect of writing to it is output
to the trace port, which is not emulated;
- DDR is only accessible in debug mode, which is not emulated.
Add two debug-mode-only opcodes:
- rfdd and rfdo do return from the debug mode, which is not emulated.
Add three internal opcodes for full MMU:
- hwwdtlba and hwwitlba are the internal opcodes that write a value into
autoupdate DTLB or ITLB entry.
- ldpte is internal opcode that loads PTE entry that covers the most
recent page fault address.
None of these three opcodes may appear in a valid instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
It doesn't help much, always-set bit 0 of the LITBASE SR is easy to
compensate with decrement of the l32r immediate argument.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace manual opcode analysis with libisa-based code. This makes it
possible to support variable-encoding instructions of the core ISA, like
const16, and will allow to support advanced Xtensa features, like FLIX
and TIE.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
FPU2000 implements basic single-precision floating point operations and
can be replaced with a different implementation, like DFPU or HiFi. Move
FPU2000 opcode translators into separate functions and list them in a
separate array.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move implementations of core opcodes into separate translation
functions. Introduce data structures for mapping opcode name to
translator function. Make an array of core opcode/translator structures.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The canonical way of dealing with Xtensa instructions decoding and
encoding is through the libisa. Libisa is a configuration-independent
library with a stable interface plus generated configuration-specific
xtensa-modules.c file with implementations of decoding and encoding
functions. Libisa is MIT-licensed and originally disributed
xtensa-modules.c files are also MIT-licensed and are available as a
part of xtensa configuration overlay.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Currently 'entry' opcode helper accepts frame size divided by 8, as it
is encoded in the opcode. Make it more natural and accept actual frame
size instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
use new XTENSA_CPU_TYPE_NAME to compose CPU type name
to bring xtensa in line with all other targets that
will similar macro.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-25-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that every target is using the disas_set_info hook,
the flags argument is unused. Remove it.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical for each target. So, move the initialization to
common code. Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.
This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using the hardcoded (MemTxAttrs){0} for no memory attributes
let's use the already defined MEMTXATTRS_UNSPECIFIED macro instead.
This is technically a change of behaviour as MEMTXATTRS_UNSPECIFIED sets
the unspecified field to 1, but it doesn't look like anything is
checking this field.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Used later. An enum makes expected values explicit and
bounds the value space of switches.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
call xtensa_irq_init() at realize time which makes
cpu_xtensa_init() like generic cpu creation function.
As result we can replace it with cpu_generic_init()
which does the same job, reducing code duplication a bit.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1503592308-93913-16-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xtensa cores may have registers of types/sizes not supported by the
gdbstub accessors. Ignore writes to such registers and return zero on
read, but always return correct register size, so that gdb on the other
side is able to access all registers in the packet holding unsupported
registers in the middle. This fixes gdb interaction with cores that have
vector/custom TIE registers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In semihosting mode QEMU allows guest to read and write host file
descriptors directly, including descriptors 0..2, a.k.a. stdin, stdout
and stderr. Sometimes it's desirable to have semihosting console
controlled by -serial option, e.g. to connect it to network.
Add semihosting console to xtensa-semi.c, open it in the 'sim' machine
in the presence of -serial option and direct stdout and stderr to it
when it's present.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Return value of read/write simcalls is not calculated correctly in case
of operations crossing page boundary and in case of short reads/writes.
Read and write simcalls should return the size of data actually
read/written or -1 in case of error.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Read and write simcalls map physical memory to access I/O buffers, but
'read' simcall need to map it for writing and 'write' simcall need to
map it for reading, i.e. the opposite of what they do now. Fix that.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
So far xtensa provides fixed dummy argc/argv for the corresponding
semihosting calls. Now that there are semihosting_get_argc and
semihosting_get_arg, use them to pass actual command line arguments
to guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make sure we have the BQL held when processing interrupts.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa core may have a number of RAM and ROM areas configured. Record
their size and location from the core configuration overlay and
instantiate them as RAM regions in the SIM machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When running certain HMP commands ("info registers", "info cpustats",
"info tlb", "nmi", "memsave" or dumping virtual memory) with the "none"
machine, QEMU crashes with a segmentation fault. This happens because the
"none" machine does not have any CPUs by default, but these HMP commands
did not check for a valid CPU pointer yet. Add such checks now, so we get
an error message about the missing CPU instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RER and WER are privileged instructions for accessing external
registers. External register address space is local to processor core.
There's no alignment requirements, addressable units are 32-bit wide
registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configuration overlay does not explicitly say whether there are ICACHE
and DCACHE in the core. Current code uses XCHAL_[ID]CACHE_WAYS to detect
if corresponding cache option is enabled, but that's not correct: on
cores without cache these macros are defined as 1, not as 0.
Check XCHAL_[ID]CACHE_SIZE instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's no point in continuing translating guest instructions once an
unconditional exception is thrown.
There's also no point in updating pc before any instruction is
translated, don't do it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Delimit each instruction that may access timers or IRQ state with
qemu_io_start/qemu_io_end, so that qemu-system-xtensa could be run with
-icount option.
Raise EXCP_YIELD after CCOMPARE reprogramming to let tcg_cpu_exec
recalculate how long this CPU is allowed to run.
RSR now may need to terminate TB, but it can't be done in RSR handler
because the same handler is used for XSR together with WSR handler, which
may also need to terminate TB. Change RSR and WSR handlers return type
to bool indicating whether TB termination is needed (RSR) or has been
done (WSR), and add TB termination after RSR/WSR dispatcher call.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores may have a register (CCOUNT) that counts core clock cycles.
It may also have a number of registers (CCOMPAREx); when CCOUNT value
passes the value of CCOMPAREx, timer interrupt x is raised.
Currently xtensa target counts a number of completed instructions and
assumes that for CCOUNT one instruction takes one cycle to complete.
It calls helper function to update CCOUNT register at every TB end and
raise timer interrupts. This scheme works very predictably and doesn't
have noticeable performance impact, but it is hard to use with multiple
synchronized processors, especially with coming MTTCG.
Derive CCOUNT from the virtual simulation time, QEMU_CLOCK_VIRTUAL.
Use native QEMU timers for CCOMPARE timers, one timer for each register.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
RUNSTALL signal stalls core execution while it's applied. It is widely
used in multicore configurations to control activity of additional
cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores may have two distinct addresses for the static vectors
group. Provide a function to select one of them.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
