Commit Graph

72 Commits

Author SHA1 Message Date
Peter Maydell 7d6e771f49 hw/versatile_pci: Expose multiple sysbus mmio regions
Clean up versatile_pci to expose the various PCI mmio regions
properly as separate mmio regions rather than as a single mmio
which uses callbacks to map and unmap everything.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10 15:29:28 +02:00
Peter Maydell 242ea2c6bc versatilepb: Implement SYS_CLCD mux control register bits
On the Versatile PB, PL110 graphics adaptor only natively supports
5551 pixel format; an external mux swaps bits around to allow
RGB565 and BGR565, under the control of bits [1:0] in the SYS_CLCD
system register.

Implement these SYS_CLCD register bits, and use a gpio line to
feed them out of the system register model, across the versatilepb
board and into the pl110 so we can select the right format.

This is necessary as recent Linux versatile kernels default to
programming the CLCD and mux for 16 bit BGR rather than 16 bit RGB.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-08-17 23:01:21 +00:00
Matthew Fernandez 8e31bf388e Correct spelling of licensed
Correct typos of "licenced" to "licensed".

Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:26:12 -05:00
Peter Maydell e6b3c8ca02 hw/versatilepb, realview: Fix condition for instantiation of onboard NIC
Correct the condition determining whether we instantiate the onboard
NIC or a PCI card NIC on VersatilePB and Realview boards. This was broken
in two ways:
 (1) if the user asked for two default NICs ("-net nic -net nic") we would
crash trying to strcmp() a NULL pointer
 (2) if the user asked for two NICs explicitly of the same model as the
onboard NIC (eg "-net nic,model=smc91c111 -net nic,model=smc91c111")
we would try to instantiate two onboard NICs at the same address.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01 22:42:25 +02:00
Peter Maydell a796d0acbb vpb_sic: Implement save/restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20 12:37:21 +01:00
Alexander Graf 2507c12ab0 Add endianness as io mem parameter
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00
Blue Swirl 2446333cd5 Rearrange block headers
Changing block.h or blockdev.h resulted in recompiling most objects.

Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-24 15:22:24 +00:00
Alex Williamson 1724f04985 qemu_ram_alloc: Add DeviceState and name parameters
These will be used to generate unique id strings for ramblocks.  The name
field is required, the device pointer is optional as most callers don't
have a device.  When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Paul Brook a67ba3b6f8 Revert "Compile usb-ohci only once"
This reverts commit f1698408f1.

PCI is always little-endian. Having a user-visible "be" property is just
plain wrong.
2010-04-04 21:18:26 +01:00
Blue Swirl f1698408f1 Compile usb-ohci only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:12 +00:00
Michael S. Tsirkin 18e08a5529 pci: pci.h cleanup: move out stuff not in pci.c
pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 17:51:04 +02:00
Paul Brook 26e92f6552 Realview/EB procid hacks
Guess core tile ID based on CPU type.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-13 04:04:18 +00:00
Markus Armbruster 07caea315a Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to
create the NIC.  When MODEL is unknown or "?", this prints to stderr
and terminates the program.

Change pci_nic_init() not to treat "?" specially, and to return NULL
on failure.  Switch uses during startup to new convenience wrapper
pci_nic_init_nofail(), which behaves just like pci_nic_init() used to
do.

Bonus bug fix: we now check for qdev_init() failing there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:53 -05:00
Anthony Liguori c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc 99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Gerd Hoffmann 5b19d9a247 qdev/usb: convert ohci.
Drop num_ports argument for usb_ohci_init_pci(), everybody
calls it with num_ports == 3, so it is pointless.

Convert ohci pci device into qdev.
TODO: convert non-pci ohci adapters.

You can add a OHCI USB Controller to your virtual pc now using
'-device pci-ohci'.  Specifying a id is a good idea, so you can
attach usb devices to it, like this:

  -device pci-ohci,id=ohci
  -device usb-mouse,bus=ohci.0

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09 14:55:18 -05:00
Gerd Hoffmann 81a322d4a1 qdev: add return value to init() callbacks.
Sorry folks, but it has to be.  One more of these invasive qdev patches.

We have a serious design bug in the qdev interface:  device init
callbacks can't signal failure because the init() callback has no
return value.  This patch fixes it.

We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault.  This patch fixes it.

With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:28 -05:00
Blue Swirl d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Markus Armbruster 5607c38820 Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into struct
NICinfo.  Use it in pci_nic_init(), and remove arguments bus and
devfn.

Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument.  Admittedly unelegant.

Machines "malta" and "r2d" have a default NIC with a well-known PCI
address.  Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:29 -05:00
Avi Kivity 1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Paul Brook 067a3ddc88 Remove qdev irq sink handling
We have both IRQ sinks and GPIO inputs.  These are in principle exactly
the same thing, so remove the former.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-26 14:56:11 +01:00
Paul Brook 02e2da45c4 Add common BusState
Implement and use a common device bus state.  The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations.  For legacy code we allow a NULL parent, but that
should go away eventually.

Also tweak creation code to veriry theat a device in on the right bus.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-23 00:13:41 +01:00
Anthony Liguori f80f9ec9a6 Convert machine registration to use module init functions
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21 08:47:55 -05:00
Paul Brook 0027b06d0e ARM PCI host qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:08 +01:00
Paul Brook b4496b13bb PL080 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:08 +01:00
Paul Brook 3950f18b9f Versatile/PB core qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook 97aff48165 PL190 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook 6a824ec3d2 ARM timers qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook aa9311d8cb PL181 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook a63bdb3102 PL031 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook 9be5dafe48 LSI SCSI qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook 86394e969d PL050 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook a7d518a61b PL011 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook 2e9bdce56f PL110 qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook fbe1b5953d Remove vga_ram_size
The vga_ram_size argument to machine init functions always has the same
value, and is ignored by many machines (including SPARC32 which has an
obsolete ifdef for VGA_RAM_SIZE).

Remove it and push VGA_RAM_SIZE into vga_int.h.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13 17:56:25 +01:00
pbrook 7ffab4d78c Use qemu_ram_alloc.
Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7052 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09 17:15:18 +00:00
aliguori 487414f1cb hw: remove error handling from qemu_malloc() callers (Avi Kivity)
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05 22:06:05 +00:00
aliguori 3023f3329d graphical_console_init change (Stefano Stabellini)
Patch 5/7

This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.

This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.

This patch does *not* include any required changes to any device, these
changes come with the following patches.

Patch 6/7

This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;

In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.

Patch 7/7

This patch updates the graphic device code to use the new
graphical_console_init function.

As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16 19:04:14 +00:00
aliguori cb457d7679 Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().

While we're at it, also add a corresponding table of NIC init
functions.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13 19:47:10 +00:00
aliguori 0ae18ceeaa Check NIC model in some NIC init functions (Mark McLoughlin)
Some NIC init functions are only called when that model is
the only valid model. In that case, it makes sense to use
qemu_check_nic_model() from the NIC init function itself.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13 19:39:36 +00:00
pbrook 8da3ff1809 Change MMIO callbacks to use offsets, not absolute addresses.
Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01 18:59:50 +00:00
balrog 3d878caab9 Set default max_cpus to one.
Clean-up machine definitions.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-28 10:59:59 +00:00
aliguori b2097003ec machine struct - specify max_cpus at the per machine level (Jes Sorensen)
Introduce a max_cpus per-machine variable, allowing individual boards
to limit it's number of CPUs. Check requested number of CPUs in setup
code and exit if it exceeds the supported number for the machine.
This also renders the static MAX_CPUS check obsolete, so remove this
from vl.c.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5443 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-07 20:39:39 +00:00
blueswir1 c9b1ae2cfd Add to machine structure a flag to use SCSI drives instead of IDE: fixes SS-20
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5339 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-28 18:55:17 +00:00
ths 1235fc066a Spelling fixes, by Stefan Weil.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4655 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-03 19:51:57 +00:00
aurel32 00f82b8a31 Use correct types to enable > 2G support, based on a patch from
Anthony Liguori.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4265 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-27 21:12:55 +00:00
aurel32 03875444d9 Revert "Use correct types to enable > 2G support" (r4238), it is
not yet ready.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4240 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-22 20:45:18 +00:00
aurel32 967032c3d5 Use correct types to enable > 2G support, based on a patch from
Anthony Liguori.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4238 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-22 20:37:34 +00:00
balrog f93eb9ff66 Move the excess of arm_load_kernel() parameters into a struct.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4212 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-14 20:27:51 +00:00
ths e4bcb14c79 Add -drive parameter, by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-02 04:51:10 +00:00