The latency of a connection to the PulseAudio server is determined by
the tlength parameter. This was hardcoded to 10ms, which is a bit too
tight on my machine, causing audio on host and guest to malfunction.
A setting of 15ms works fine here. To allow tweaking, I also made the
setting configurable via the new -audiodev config. This allows to squeeze out better timings in scenarios where the emulation allows it.
I also removed setting of the minreq parameter to (seemingly arbitrary) half the latency, since it showed worse audio quality during my tests. Allowing PulseAudio to request smaller chunks helped.
Signed-off-by: Martin Schrodt <martin@schrodt.org>
Message-id: 20190315084653.120020-3-martin@schrodt.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audiodev configuration allows to set the length of the buffered data.
The setting was ignored and a constant value used instead.
This patch makes the code apply the setting properly, and uses the
previous default if nothing is supplied.
Signed-off-by: Martin Schrodt <martin@schrodt.org>
Message-id: 20190315084653.120020-2-martin@schrodt.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio drivers now get an Audiodev * as config paramters, instead of the
global audio_option structs. There is some code in audio/audio_legacy.c
that converts the old environment variables to audiodev options (this
way backends do not have to worry about legacy options). It also
contains a replacement of -audio-help, which prints out the equivalent
-audiodev based config of the currently specified environment variables.
Note that backends are not updated and still rely on environment
variables.
Also note that (due to moving try-poll from global to backend specific
option) currently ALSA and OSS will always try poll mode, regardless of
environment variables or -audiodev options.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: e99a7cbdac0d13512743880660b2032024703e4c.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At the end of the while-loop, either "samples" or "sdl->live" is zero, so
now that we've removed the semaphore code, the content of the while-loop
is always only executed once. Thus we can remove the while-loop now to
get rid of one indentation level here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1549336101-17623-3-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The semaphore code was only working with SDL1.2 - with SDL2, it causes
a deadlock. Since we've removed support for SDL1.2 recently, we can
now completely remove the semaphore code from sdlaudio.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1549336101-17623-2-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_calloc uses g_malloc0 which never returns in case of
memory failure.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20190225154335.11397-2-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of using lot of low level function and manually allocate
the temporary string in audio_process_options use more high
level GLib function. The function is not used in hot path but to
read some initial setting.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20190225154335.11397-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kill off a pile of monitor_printf's and cur_mon usage.
The only one left in wavcapture.c is the info case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170320173840.3626-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Only print a message about the failed driver initialization in case it
was the driver explicitly requested by the user via QEMU_AUDIO_DRV=$drv.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124112055.547-6-kraxel@redhat.com
Check whenever the pulseaudio daemon pidfile is present before trying to
initialize the pulseaudio backend. Just return NULL if that is not the
case, so qemu will check the next backend in line.
In case the user explicitly configured a non-default pulseaudio server
skip the check.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-5-kraxel@redhat.com
Files requiring AudioState already include "audio_int.h".
To clean "qemu/typedefs.h", move the declaration to "audio_int.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Both GCC v4.8 and Clang v3.4 support the -Waddress option, so we do
not need the compiler version check here anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The rate of pulseaudio absorbing the audio stream is used to control the
the rate of the guests audio stream. When the emulated hardware uses
small chunks (like intel-hda does) we need small chunks on the audio
backend side too, otherwise that feedback loop doesn't work very well.
Cc: Max Ehrlich <maxehr@umiacs.umd.edu>
Cc: Martin Schrodt <martin@schrodt.org>
Buglink: https://bugs.launchpad.net/bugs/1795527
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181109142032.1628-1-kraxel@redhat.com
Make audio_driver_lookup() try load the module in case it doesn't find
the driver in the registry. Also load all modules for -audio-help, so
the help output includes the help text for modular audio drivers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-3-kraxel@redhat.com
Add registry for audio drivers, using the existing audio_driver struct.
Make all drivers register themself. The old list of audio_driver struct
pointers is now a list of audio driver names, specifying the priority
(aka probe order) in case no driver is explicitly asked for.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-2-kraxel@redhat.com
This avoids a name clash for CONFIG_SDL, which is used by both sdl video
support and sdl audio support. It also more clear that this is a audio
driver configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-13-kraxel@redhat.com
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Apparently we don't use __MSC_VER as a compiler anymore and we always
require a C99 compiler (which means we always have __func__) so we don't
need a special AUDIO_FUNC macro. We can just replace AUDIO_FUNC with
__func__ instead.
Checkpatch failures were manually fixed.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-2-armbru@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In trace format '#' flag of printf is forbidden. Fix it to '0x%'.
This patch is created by the following:
check that we have a problem
> find . -name trace-events | xargs grep '%#' | wc -l
56
check that there are no cases with additional printf flags before '#'
> find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l
0
check that there are no wrong usage of '#' and '0x' together
> find . -name trace-events | xargs grep '0x%#' | wc -l
0
fix the problem
> find . -name trace-events | xargs sed -i 's/%#/0x%/g'
[Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep
"%[-+ 0'I]+#" instead so the shell quoting is correct.
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If a voice recording equipment is opened for a long time(several days)
in windows guest, rate->ipos will overflow and rate->opos will never
have a chance to change. It will result to a infinite loop.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Message-id: 1500128061-20849-1-git-send-email-peng.hao2@zte.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When compiling with SDL2, the semaphore trick used in sdlaudio.c
does not work - QEMU locks up completely in this case. To avoid
the hang and get at least some audio playback up and running (it's
a little bit crackling, but better than nothing), we can use the
SDL locking functions SDL_LockAudio() and SDL_UnlockAudio() to sync
with the sound playback thread instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1485852398-2327-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes resetting strategy of the audio polling timer.
It does not change expiration time if the timer is already set.
This patch is needed to make this timer deterministic and to use execution
record/replay for audio devices.
audio_reset_timer is used in the function audio_vm_change_state_handler.
Therefore every time VM is stopped or restarted the timer will be reset
to new timeout. Virtual clock does not proceed while VM is stopped.
Therefore there is no need in resetting the timeout when VM restarts.
v2: updated commit message
v3: now using timer_mod_anticipate function (as suggested by Yurii Zubrytskyi)
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170214071510.6112.76764.stgit@PASHA-ISP
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds recording and replaying audio data. Is saves synchronization
information for audio out and inputs from the microphone.
v2: removed unneeded whitespace change
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170202055054.4848.94901.stgit@PASHA-ISP.lan02.inno
[ kraxel: add qemu/error-report.h include to fix osx build failure ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu,
before the atexit() handlers. audio_cleanup() may use the monitor to
notify of changes. For compatibility reasons, let's clean up audio
before the monitor so it keeps emitting monitor events.
The audio_atexit() function is made idempotent (so it can be called
multiple times), and renamed to audio_cleanup(). Since coreaudio
backend is using a 'isAtexit' code path, change it to check
audio_is_cleaning_up() instead, so the path is taken during normal
exit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-3-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the audio/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-35-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since pulseaudio 1.0 it's possible to set the individual stream volume
rather than setting the device volume. With this, setting hardware mixer
of a emulated sound card doesn't mess up the volume configuration of the
host.
A side effect is that this limits compatible pulseaudio version to 1.0
which was released on 2011-09-27.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move it to the actual users. There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453138432-8324-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_init() should not use hw_error(), because dumping CPU registers
is unhelpful there, and aborting is wrong, because it can be called
called from an audio device's realize() method.
The two uses of hw_error() come from commit 0d9acba:
* When qemu_new_timer() fails. It couldn't fail back then, and it
can't fail now. Drop the unreachable error handling.
* When no_audio_driver can't be initialized. It couldn't fail back
then, and it can't fail now. Replace the error handling by an
assertion.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
The AudioDeviceAddIOProc() and AudioDeviceRemoveIOProc() functions were
deprecated in OSX 10.5. Since we don't support any earlier versions of
OSX, we can simply replace them with the new APIs
AudioDeviceCreateIOProcID() and AudioDeviceRemoveIOProcID().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new-in-OSX 10.6 API AudioObjectGetPropertyData() instead
of the deprecated AudioDeviceGetProperty() and AudioDeviceSetProperty()
functions when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CoreAudio APIs AudioDeviceGetProperty and AudioDeviceSetProperty are
deprecated from OSX 10.6, so factor out our calls to them so we can
provide versions which use the replacement APIs on OSX newer than 10.5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we're building for OSX 10.6 or better, use the new API
AudioObjectGetPropertyData for getting the default voice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CoreAudio function AudioHardwareGetProperty has been deprecated
starting with OSX 10.6, so factor out our call to it so we can
provide an equivalent with the new APIs when they exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Variable "conf" going out of scope leaks the storage
it points to in line 856.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1435021270-7768-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enabling this option just creates a playback buffer with the specified settings,
and then ignores it. It's probably some outdated hack to set audio formats on
windows. (The first created stream dictates all other streams settings, at least
on some Windows versions). Setting DAC_FIXED_SETTINGS should have the same
effect as setting (the now removed) primary buffer.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to MSDN this may happen when the window is not in the foreground, but
the default is 1 since a long time (which means no retries), so it should be ok.
I've found no problems during testing it on Windows 7 and wine, so this was
probably only the case with some old Windows versions.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.
This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since SDL uses a lot of global data, we can't create independent
instances of sdl audio backend.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qpa_audio_init did not clean up resources properly if the initialization
failed. This hopefully fixes it.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the opaque pointer returned by audio_driver's init is only
exposed to the driver's fini, but not to audio_pcm_ops. This way if
someone wants to share a variable with the driver and the pcm, he must
use global variables. This patch fixes it by adding a third parameter to
audio_pcm_op's init_out and init_in.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DirectSound should be a superior choice on Windows.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ESD is no longer developed and replaced by PulseAudio.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function cannot fail, so the check is superfluous.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-11-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The function cannot fail, so the check is superfluous.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When stopping an audio voice, call the audio backend's fini
method before calling audio_pcm_hw_free_resources_ rather than
afterwards. This allows backends which use helper threads (like
pulseaudio) to terminate those threads before the conv_buf or
mix_buf are freed and avoids race conditions where the helper
may access a NULL pointer or freed memory.
Cc: qemu-stable@nongnu.org
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418406239-9838-1-git-send-email-peter.maydell@linaro.org
Replace fprintf(stderr,...) with error_report() in files audio/*.
The trailing "\n"s of the @fmt argument have been removed
because @fmt of error_report() should not contain newline.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is more then plenty to keep audio card fifos filles / emptied.
This drops host cpu-load for audio playback inside a linux vm from
13% to 9%.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check whenever the device path (/dev/dsp by default) exists and qemu is
allowed to access it. Return NULL if it isn't, so ossaudio will not
be used on systems wihtout oss support (increasinly common on modern
linux systems).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Modern Linux's no longer support /dev/dsp so enabling it by
default causes audio failures on newer Linux distros.
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1383497154-9271-1-git-send-email-aliguori@amazon.com
