I was setting gpioV4-7 to "1110" using the QOM pin property handler and
noticed that lowering gpioV7 was inadvertently lowering gpioV4-6 too.
(qemu) qom-set /machine/soc/gpio gpioV4 true
(qemu) qom-set /machine/soc/gpio gpioV5 true
(qemu) qom-set /machine/soc/gpio gpioV6 true
(qemu) qom-get /machine/soc/gpio gpioV4
true
(qemu) qom-set /machine/soc/gpio gpioV7 false
(qemu) qom-get /machine/soc/gpio gpioV4
false
An expression in aspeed_gpio_set_pin_level was using a logical NOT
operator instead of a bitwise NOT operator:
value &= !pin_mask;
The original author probably intended to make a bitwise NOT expression
"~", but mistakenly used a logical NOT operator "!" instead. Some
programming languages like Rust use "!" for both purposes.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and
AST2500")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220502080827.244815-1-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This add two addition test cases for accumulative mode under sg enabled.
The input vector was manually craft with "abc" + bit 1 + padding zeros + L.
The padding length depends on algorithm, i.e. SHA512 (1024 bit),
SHA256 (512 bit).
The result was calculated by command line sha512sum/sha256sum utilities
without padding, i.e. only "abc" ascii text.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20220426021120.28255-4-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The aspeed ast2600 accumulative mode is described in datasheet
ast2600v10.pdf section 25.6.4:
1. Allocating and initiating accumulative hash digest write buffer
with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial
state of hash library, and the initial state is already set by
crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add
padding message at the end of the accumulative data. Padding
message described in specific of MD5, SHA-1, SHA224, SHA256,
SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the
padding message internally.
* This patch is to remove the padding message which fed byguest
machine driver.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Support HACE28: Hash HMAC Key Buffer Base Address Register.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Current fmc model of AST2500 EVB and AST2600 EVB can't emulate quad
mode properly so fix them using equivalent mx25l25635e and mx66u51235f
respectively.
These default settings still can be overridden using the 'fmc-model'
command line option.
Reported-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220402184427.4010304-1-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add test case to test "ast1030-evb" machine with zephyr os
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-10-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The image should be supplied with ELF binary.
$ qemu-system-arm -M ast1030-evb -kernel zephyr.elf -nographic
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-9-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The embedded core of AST1030 SoC is ARM Coretex M4.
It is hard to be integrated in the common Aspeed Soc framework.
We introduce a new ast1030 class with instance_init and realize
handlers.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ]
Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v07.pdf, AST1030 SOC doesn't have SCU300, the pclk divider
selection is defined in SCU310[11:8].
Add a get_apb_freq function and a class init handler for ast1030.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-7-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ast1030 tmc(timer controller) is identical to ast2600 tmc.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-6-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 wdt controller is similiar to AST2600's wdt, but it has extra
registers.
Introduce ast1030 object class and increse the number of regs(offset) of
ast1030 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-5-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast2500_2520_datasheet_v1.8 and ast2600v11.pdf, the default value of
WDT00 and WDT04 is 0x014FB180 for ast2500/ast2600.
Add default_status and default_reload_value attributes for storing
counter status and reload value as they are different from ast2400.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-4-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 spi controller's address decoding unit is 1MB that is identical
to ast2600, but fmc address decoding unit is 512kb.
Introduce seg_to_reg and reg_to_seg handlers for ast1030 fmc controller.
In addition, add ast1030 fmc, spi1, and spi2 class init handler.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-3-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v7.pdf, AST1030 ADC engine is identical to AST2600's ADC.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-2-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Guest code (u-boot) pokes at this on boot. No functionality is required
for guest code to work correctly, but it helps to document the region
being read from.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220318092211.723938-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In order to correctly report secure boot running firmware, these values
must be set. They are taken from a running machine when secure boot is
enabled.
We don't yet have documentation from ASPEED on what they mean. Set the
raw values for now, and in the future improve the model with properties
to set these on a per-machine basis.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220310052159.183975-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600 clkin is always 25MHz, introduce clkin_25Mhz attribute
for aspeed_scu_get_clkin() to return the correct clkin for ast2600.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220315075753.8591-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600's HPLL register offset and bit definition are different from
AST2500. Add a hpll calculation function and an apb frequency calculation
function based on SCU200 register description in ast2600v11.pdf.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
qemu_mknodat() is expected to behave according to its POSIX API, and
therefore should always return exactly -1 on any error, and errno
should be set for the actual error code.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <c714b5e1cae225ab7575242c45ee0fe4945eb6ad.1651228001.git.qemu_oss@crudebyte.com>
When mapped POSIX ACL is used, we are ignoring errors when trying
to remove a POSIX ACL xattr that does not exist. On Linux hosts we
would get ENODATA in such cases, on macOS hosts however we get
ENOATTR instead.
As we can be sure that ENOATTR is defined as being identical on Linux
hosts (at least by qemu/xattr.h), it is safe to fix this issue by
simply comparing against ENOATTR instead of ENODATA.
This patch fixes e.g. a command on Linux guest like:
cp --preserve=mode old new
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Link: https://lore.kernel.org/qemu-devel/2866993.yOYK24bMf6@silver/
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <34f81e9bffd7a3e65fb7aab5b56c107bd0aac960.1651228001.git.qemu_oss@crudebyte.com>
Linux and macOS only share some errno definitions with equal macro
name and value. In fact most mappings for errno are completely
different on the two systems.
This patch converts some important errno values from macOS host to
corresponding Linux errno values before eventually sending such error
codes along with 'Rlerror' replies (if 9p2000.L is used that is). Not
having translated errnos before violated the 9p2000.L protocol spec,
which says:
"
size[4] Rlerror tag[2] ecode[4]
... ecode is a numerical Linux errno.
"
https://github.com/chaos/diod/wiki/protocol#lerror----return-error-code
This patch fixes a bunch of misbehaviours when running a Linux client
on macOS host. For instance this patch fixes:
mount -t 9p -o posixacl ...
on Linux guest if security_mode=mapped was used for 9p server, which
refused to mount successfully, because macOS returned ENOATTR==93
when client tried to retrieve POSIX ACL xattrs, because errno 93
is defined as EPROTONOSUPPORT==93 on Linux, so Linux client believed
that xattrs were not supported by filesystem on host in general.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Link: https://lore.kernel.org/qemu-devel/20220421124835.3e664669@bahia/
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <b322ab298a62069e527d2b032028bdc9115afacd.1651228001.git.qemu_oss@crudebyte.com>
The 'rdev' field in 9p reponse 'Rgetattr' is of type dev_t,
which is actually a system dependant type and therefore both the
size and encoding of dev_t differ between macOS and Linux.
So far we have sent 'rdev' to guest in host's dev_t format as-is,
which caused devices to appear with wrong device numbers on
guests running on macOS hosts, eventually leading to various
misbehaviours on guest in conjunction with device files.
This patch fixes this issue by converting the device number from
host's dev_t format to Linux dev_t format. As 9p request
'Tgettattr' is exclusive to protocol version 9p2000.L, it should
be fair to assume that 'rdev' field is assumed to be in Linux dev_t
format by client as well.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Link: https://lore.kernel.org/qemu-devel/20220421093056.5ab1e7ed@bahia/
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <b3a430c2c382ba69a7405e04c0b090ab0d86f17e.1651228001.git.qemu_oss@crudebyte.com>
mknod() on macOS does not support creating sockets, so divert to
call sequence socket(), bind() and fchmodat() respectively if S_IFSOCK
was passed with mode argument.
Link: https://lore.kernel.org/qemu-devel/17933734.zYzKuhC07K@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <2e7b5ecd7a6d83a538db4e8a22d8fb03e9e0f06e.1651228001.git.qemu_oss@crudebyte.com>
[C.S. - Use AT_SYMLINK_NOFOLLOW instead of AT_SYMLINK_NOFOLLOW_ANY. ]
Link: https://lore.kernel.org/qemu-devel/3704033.BMyLRrx2Jx@silver/
mknod() on macOS does not support creating regular files, so
divert to openat_file() if S_IFREG is passed with mode argument.
Furthermore, 'man 2 mknodat' on Linux says: "Zero file type is
equivalent to type S_IFREG".
Link: https://lore.kernel.org/qemu-devel/17933734.zYzKuhC07K@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <3102ca936f88bc1f79d2a325e5bc68f48f54e6e3.1651228000.git.qemu_oss@crudebyte.com>
The 'synth' driver's root node and the 'synth' driver's first
subdirectory node falsely share the same inode number (zero), which
makes it impossible for 9p clients (i.e. 9p test cases) to distinguish
root node and first subdirectory from each other by comparing their QIDs
(which are derived by 9p server from driver's inode numbers).
Fix this issue by using prefix-increment instead of postfix-increment
operator while generating new inode numbers for subdirectories and files.
Link: https://lore.kernel.org/qemu-devel/3859307.hTDP4D0zbi@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1nTpyU-0000yR-9o@lizzy.crudebyte.com>
* Improve device tree generation
* Support configuarable marchid, mvendorid, mipid CSR values
* Add support for the Zbkb, Zbkc, Zbkx, Zknd/Zkne, Zknh, Zksed/Zksh and Zkr extensions
* Fix incorrect PTE merge in walk_pte
* Add TPM support to the virt board
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmJraeUACgkQIeENKd+X
cFRLjgf9GFmxPhOC8cb7wN6xsiJIiVmmcTGHKfUgFTAIR2KLOEm2fo28YNrgewok
Hi7FBHLhYKEivz70GFVg7q6oJlqhYx8fL4AB0sodTetIcJGQPQgz8zN7ZD8utnzA
d6n7ZruyW5IuUqCBUcsHNqBHxoYanR88rr6YpxU+nSz0WALYRgQliXm5zqK1rwNc
v8HpLHyN7JUmAQmJ1U6Uc6IFi/cFn9e/Hs/uRMevKov2nCTxeeAq5G2r8JGKpx35
VRid91dcWbGiRY1xHWqnl/0WZxl8Jp4av1e5NDbXfwYPvwiI2fza5KFasp2S38yR
VvnUcI+p73qclCF7LkfL9c//xQT1iA==
=Xkoz
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20220429' of github.com:alistair23/qemu into staging
Second RISC-V PR for QEMU 7.1
* Improve device tree generation
* Support configuarable marchid, mvendorid, mipid CSR values
* Add support for the Zbkb, Zbkc, Zbkx, Zknd/Zkne, Zknh, Zksed/Zksh and Zkr extensions
* Fix incorrect PTE merge in walk_pte
* Add TPM support to the virt board
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmJraeUACgkQIeENKd+X
# cFRLjgf9GFmxPhOC8cb7wN6xsiJIiVmmcTGHKfUgFTAIR2KLOEm2fo28YNrgewok
# Hi7FBHLhYKEivz70GFVg7q6oJlqhYx8fL4AB0sodTetIcJGQPQgz8zN7ZD8utnzA
# d6n7ZruyW5IuUqCBUcsHNqBHxoYanR88rr6YpxU+nSz0WALYRgQliXm5zqK1rwNc
# v8HpLHyN7JUmAQmJ1U6Uc6IFi/cFn9e/Hs/uRMevKov2nCTxeeAq5G2r8JGKpx35
# VRid91dcWbGiRY1xHWqnl/0WZxl8Jp4av1e5NDbXfwYPvwiI2fza5KFasp2S38yR
# VvnUcI+p73qclCF7LkfL9c//xQT1iA==
# =Xkoz
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Apr 2022 09:30:29 PM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20220429' of github.com:alistair23/qemu: (25 commits)
hw/riscv: Enable TPM backends
hw/riscv: virt: Add device plug support
hw/riscv: virt: Add support for generating platform FDT entries
hw/riscv: virt: Create a platform bus
hw/core: Move the ARM sysbus-fdt to core
hw/riscv: virt: Add a machine done notifier
target/riscv: add scalar crypto related extenstion strings to isa_string
target/riscv: Fix incorrect PTE merge in walk_pte
target/riscv: rvk: expose zbk* and zk* properties
disas/riscv.c: rvk: add disas support for Zbk* and Zk* instructions
target/riscv: rvk: add CSR support for Zkr
target/riscv: rvk: add support for zksed/zksh extension
target/riscv: rvk: add support for sha512 related instructions for RV64 in zknh extension
target/riscv: rvk: add support for sha512 related instructions for RV32 in zknh extension
target/riscv: rvk: add support for sha256 related instructions in zknh extension
target/riscv: rvk: add support for zkne/zknd extension in RV64
target/riscv: rvk: add support for zknd/zkne extension in RV32
crypto: move sm4_sbox from target/arm
target/riscv: rvk: add support for zbkx extension
target/riscv: rvk: add support for zbkc extension
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Imply the TPM sysbus devices. This allows users to add TPM devices to
the RISC-V virt board.
This was tested by first creating an emulated TPM device:
swtpm socket --tpm2 -t -d --tpmstate dir=/tmp/tpm \
--ctrl type=unixio,path=swtpm-sock
Then launching QEMU with:
-chardev socket,id=chrtpm,path=swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-device,tpmdev=tpm0
The TPM device can be seen in the memory tree and the generated device
tree.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/942
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-7-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for plugging in devices, this was tested with the TPM
device.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-6-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Similar to the ARM virt machine add support for adding device tree
entries for dynamically created devices.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20220427234146.1130752-5-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a platform bus to allow dynamic devices to be connected. This is
based on the ARM implementation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-4-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ARM virt machine currently uses sysbus-fdt to create device tree
entries for dynamically created MMIO devices.
The RISC-V virt machine can also benefit from this, so move the code to
the core directory.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the binary and device tree loading code to the machine done
notifier. This allows us to prepare for editing the device tree as part
of the notifier.
This is based on similar code in the ARM virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-2-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add zbk* and zk* strings to isa_edata_arr
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Tested-by: Jiatai He <jiatai2021@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220426095204.24142-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Two non-subsequent PTEs can be mapped to subsequent paddrs. In this
case, walk_pte will erroneously merge them.
Enforce the split up, by tracking the virtual base address.
Let's say we have the mapping:
0x81200000 -> 0x89623000 (4K)
0x8120f000 -> 0x89624000 (4K)
Before, walk_pte would have shown:
vaddr paddr size attr
---------------- ---------------- ---------------- -------
0000000081200000 0000000089623000 0000000000002000 rwxu-ad
as it only checks for subsequent paddrs. With this patch, it becomes:
vaddr paddr size attr
---------------- ---------------- ---------------- -------
0000000081200000 0000000089623000 0000000000001000 rwxu-ad
000000008120f000 0000000089624000 0000000000001000 rwxu-ad
Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423215907.673663-1-ralf.ramsauer@oth-regensburg.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-15-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Ruibo Lu <luruibo2000@163.com>
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-14-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add SEED CSR which must be accessed with a read-write instruction:
A read-only instruction such as CSRRS/CSRRC with rs1=x0 or CSRRSI/CSRRCI
with uimm=0 will raise an illegal instruction exception.
- add USEED, SSEED fields for MSECCFG CSR
Co-authored-by: Ruibo Lu <luruibo2000@163.com>
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-13-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add sm3p0, sm3p1, sm4ed and sm4ks instructions
Co-authored-by: Ruibo Lu <luruibo2000@163.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-12-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add sha512sum0, sha512sig0, sha512sum1 and sha512sig1 instructions
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-11-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add sha256sig0, sha256sig1, sha256sum0 and sha256sum1 instructions
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add aes32esmi, aes32esi, aes32dsmi and aes32dsi instructions
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- share it between target/arm and target/riscv
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add xperm4 and xperm8 instructions
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- reuse partial instructions of zbc extension, update extension check for them
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- reuse partial instructions of zbb extension, update extension check for them
- add brev8, pack, packh, packw, unzip, zip instructions
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allow user to set core's marchid, mvendorid, mipid CSRs through
-cpu command line option.
The default values of marchid and mipid are built with QEMU's version
numbers.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220422040436.2233-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Peter Delevoryas
Steven Lee
Jae Hyun Yoo
Jamin Lin
Joel Stanley
Richard Henderson
Christian Schoenebeck
Alistair Francis
Weiwei Li
Ralf Ramsauer
Frank Chang