When we try to use some targets on ppc64, it can happen the target
doesn't support the host page size to align ELF load sections and
fails with:
ELF load command alignment not page-aligned
Since commit a70daba377 ("linux-user: Tell guest about big host
page sizes") the host page size is used to align ELF sections, but
this doesn't work if the alignment required by the load section is
smaller than the host one. For these cases, we continue to use the
TARGET_PAGE_SIZE instead of the host one.
I have tested this change on ppc64, and it fixes qemu linux-user for:
s390x, m68k, i386, arm, aarch64, hppa
and I have tested it doesn't break the following targets:
x86_64, mips64el, sh4
mips and mipsel abort, but I think for another reason.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: fixed "info->alignment = 0"]
Message-Id: <20180716195349.29959-1-laurent@vivier.eu>
Version: GnuPG v1
iQEcBAABAgAGBQJbUS+LAAoJEO8Ells5jWIRaM0H+wZMfW4SDf+CaR3e4LZVRvyS
88km4y4EZFbAnVmI89fUzn9FhDizT659vgTxNwrFd1S/p/x51OzrEJtiGm/OfkRc
y/fU2DQt8eIx2WDp7HzvHyMYXd08WQiItyJbpCLUukqXAzX2v4OATnz9ZoAxPHof
z0fzejOokEo0fKqe+LgOB3upQDRsXGPOYiSo7wUHy1tk9P+ndym5kZcdU44EPtON
Q/6COv3claUmEmDtQbpOhPZ2HPFL5nJoSL9rIKfUEweJj1+OHp7b1+lrw1W7sPRP
INUdmX5+bnk6oieR2dsSFp8IealZH6BwZ4jkc8sME/HeCSBTy1mWyeFa+TDA2lI=
=3U4O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 20 Jul 2018 01:40:43 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: fix memory leak on success to create a tap device
e1000e: Prevent MSI/MSI-X storms
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The memory leak on success to create a tap device. And the nfds and
nvhosts may not be the same and need to be processed separately.
Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device")
Fixes: 264986e2 ("tap: multiqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Only signal MSI/MSI-X events on rising edges. So far we re-triggered the
interrupt sources even if the guest did no consumed the pending one,
easily causing interrupt storms.
Issue was observable with Linux 4.16 e1000e driver when MSI-X was used.
Vector 2 was causing interrupt storms after the driver activated the
device.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is based on Thomas's work fixing introspection problems [1] and
applied to the RISC-V port.
1: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03261.html
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAltQtu8ACgkQIeENKd+X
cFTCvAf+MNkMDcOJOlb2AsCwmYcnDj1YwiaobkDpPbKCl4u2q6j6kOhbBGpaROE0
RBwIYOMIuWiyevnlDSytFGgc+TSnriFNmwMrfMKlD8haRbc+mbYulRICAYIRWCOo
mk8Z+GYn3fw8tYiIudEj2jmObA7ushMjhKvo8/RmWk+Gz866KS8BpqR8LiTm6E66
ejiar28IDId+XUbl3OJhh4RzUCyttEMfmUKE5s8Bi4gPN6J578FexdcLIlvkqPqN
UUMz/8GgogjvFS/jkR5fRIcdqV6flKNtwnzZByTu76HtyvF7kXMr5PHe52kgVAQ2
0RYea4XxQWMG+9MeZ/CsXYyiJRi/Lg==
=EVRY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pull-20180719' into staging
riscv: Fix introspection problems
This is based on Thomas's work fixing introspection problems [1] and
applied to the RISC-V port.
1: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03261.html
# gpg: Signature made Thu 19 Jul 2018 17:06:07 BST
# gpg: using RSA key 21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-pull-20180719:
spike: Fix crash when introspecting the device
riscv_hart: Fix crash when introspecting the device
virt: Fix crash when introspecting the device
sifive_u: Fix crash when introspecting the device
sifive_e: Fix crash when introspecting the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In AdvSIMD we can only do 32x32 integer multiples although SVE is
capable of larger 64 bit multiples. As a result we can end up
generating invalid opcodes. Fix this by only reprting we can emit
mul vector ops if the size is small enough.
Fixes a crash on:
sve-all-short-v8.3+sve@vq3/insn_mul_z_zi___INC.risu.bin
When running on AArch64 hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180719154248.29669-1-alex.bennee@linaro.org>
[rth: Removed the tcg_debug_assert -- there are plenty of other
cases that we do not diagnose within the insn encoding helpers.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The '-trace' and '--trace' spellings are only both supported in qemu
binary, while for qemu-nbd or qemu-img only '--trace' spelling is
supported. So for the consistency of trace option invocation, we
should use double-dash spelling in our documentation.
This's also mentioned in
https://wiki.qemu.org/BiteSizedTasks#Consistent_option_usage_in_documentation
.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1530674247-31200-1-git-send-email-baiyaowei@cmss.chinamobile.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Throttle groups consist of members sharing one throttling state
(including bps/iops limits). Round-robin scheduling is used to ensure
fairness. If a group member already has a timer pending then other
groups members do not schedule their own timers. The next group member
will have its turn when the existing timer expires.
A hang may occur when a group member leaves while it had a timer
scheduled. Although the code carefully removes the group member from
the round-robin list, it does not schedule the next member. Therefore
remaining members continue to wait for the removed member's timer to
expire.
This patch schedules the next request if a timer is pending.
Unfortunately the actual bug is a race condition that I've been unable
to capture in a test case.
Sometimes drive2 hangs when drive1 is removed from the throttling group:
$ qemu ... -drive if=none,id=drive1,cache=none,format=qcow2,file=data1.qcow2,iops=100,group=foo \
-device virtio-blk-pci,id=virtio-blk-pci0,drive=drive1 \
-drive if=none,id=drive2,cache=none,format=qcow2,file=data2.qcow2,iops=10,group=foo \
-device virtio-blk-pci,id=virtio-blk-pci1,drive=drive2
(guest-console1)# fio -filename /dev/vda 4k-seq-read.job
(guest-console2)# fio -filename /dev/vdb 4k-seq-read.job
(qmp) {"execute": "block_set_io_throttle", "arguments": {"device": "drive1","bps": 0,"bps_rd": 0,"bps_wr": 0,"iops": 0,"iops_rd": 0,"iops_wr": 0}}
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180704145410.794-1-stefanha@redhat.com
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1535914
Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Usually, when baselining two CPU models, whereby one of them has base
CPU features disabled (e.g. z14-base,msa=off), we fallback to an older
model that did not have these features in the base model. We always try to
create a "sane" CPU model (as far as possible), and one part of it is that
removing base features is no good and to be avoided.
Now, if we disable base features that were part of a z900, we're out of
luck. We won't find a CPU model and QEMU will segfault. This is a
scenario that should never happen in real life, but it can be used to
crash QEMU.
So let's properly report an error if we baseline e.g.:
{ "execute": "query-cpu-model-baseline",
"arguments" : { "modela": { "name": "z14-base", "props": {"esan3" : false}},
"modelb": { "name": "z14"}} }
Instead of segfaulting.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180718092330.19465-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
QEMU options have a single dash (but also work as double dash for
convenience and compatibility). Most options are listed with single
dash in command line help but some were listed with two dashes.
Normalize these to have the same format as the others.
Left --preconfig as that is mentioned as double dash everywhere so I
assume that is the preferred form for that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180716193312.A5BA17456B9@zero.eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No callers of get_opt_value() pass in a NULL for the "value" parameter,
so the check is redundant.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-4-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The multiboot code parses the initrd_filename twice, first to count how
many entries there are, and second to process each entry. This changes
the first loop to store the parse module names in a list, and the second
loop can now use these names. This avoids having to pass NULL to the
get_opt_value() method which means it can safely assume a non-NULL param.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-3-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The logic for parsing the multiboot initrd modules was messed up in
commit 950c4e6c94
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Apr 16 12:17:43 2018 +0100
opts: don't silently truncate long option values
Causing the length to be undercounter, and the number of modules over
counted. It also passes NULL to get_opt_value() which was not robust
at accepting a NULL value.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-2-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU currently crashes when e.g. doing something like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'xlnx,zynqmp'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" \
| aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
Use the new object_initialize_child() and sysbus_init_child_obj()
functions to get the refernce counting of the child objects right, so
that they are properly cleaned up when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-18-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
aux_create_slave() calls qdev_init_nofail() which in turn "realizes"
the corresponding object. This is unlike qdev_create(), and it is wrong
because qdev_init_nofail() must not be called from an instance_init
function. Move qdev_init_nofail() and the subsequent aux_map_slave into
the caller's realize function.
There are two more bugs that needs to be fixed here, too, where the
objects are created but not added as children. Therefore when
you call object_unparent on them, nothing happens.
In particular dpcd and edid give you an infinite loop in bus_unparent,
because device_unparent is not called and does not remove them from
the list of devices on the bus.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-17-git-send-email-thuth@redhat.com
[thuth: Added Paolo's fixup for the dpcd and edid unparenting]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx31'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==26172== Invalid read of size 8
==26172== at 0x6191FA: qdev_print (qdev-monitor.c:686)
==26172== by 0x6191FA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() to make sure that the objects are
cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-12-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx25'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==26724== Invalid read of size 8
==26724== at 0x6190DA: qdev_print (qdev-monitor.c:686)
==26724== by 0x6190DA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() to make sure that the objects are
cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-11-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx7'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==27284== Invalid read of size 8
==27284== at 0x618F7A: qdev_print (qdev-monitor.c:686)
==27284== by 0x618F7A: qbus_print (qdev-monitor.c:719)
==27284== by 0x452B38: handle_hmp_command (monitor.c:3446)
[...]
Use the new sysbus_init_child_obj() and object_initialize_child() to make
sure that the objects are removed correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-10-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx6'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==32417== Invalid read of size 8
==32417== at 0x618A7A: qdev_print (qdev-monitor.c:686)
==32417== by 0x618A7A: qbus_print (qdev-monitor.c:719)
==32417== by 0x452B38: handle_hmp_command (monitor.c:3446)
[...]
Use the new sysbus_init_child_obj() and object_initialize_child() to make
sure that the objects are removed correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-9-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'a9mpcore_priv'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==30996== Invalid read of size 8
==30996== at 0x6185DA: qdev_print (qdev-monitor.c:686)
==30996== by 0x6185DA: qbus_print (qdev-monitor.c:719)
==30996== by 0x452B38: handle_hmp_command (monitor.c:3446)
[...]
Use the new sysbus_init_child_obj() function to make sure that the objects
are cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-8-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Valgrind currently reports a problem when running QEMU like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'msf2-soc'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==23097== Invalid read of size 8
==23097== at 0x6192AA: qdev_print (qdev-monitor.c:686)
==23097== by 0x6192AA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() function to make sure that the child
objects are cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-7-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a memory management problem when introspecting the a15mpcore_priv
device. It can be seen with valgrind when running QEMU like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'a15mpcore_priv'}}"\
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 12, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
{"return": [{"name": "num-cpu", "type": "uint32"}, {"name": "num-irq",
"type": "uint32"}, {"name": "a15mp-priv-container[0]", "type":
"child<qemu:memory-region>"}]}
==24978== Invalid read of size 8
==24978== at 0x618EBA: qdev_print (qdev-monitor.c:686)
==24978== by 0x618EBA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() function to make sure that we get
the reference counting of the child objects right.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-6-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently crashes when introspecting the "iotkit" device and
runnint "info qtree" afterwards, e.g. when running QEMU like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'iotkit'}}" "{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
Use the new functions object_initialize_child() and sysbus_init_child_obj()
to make sure that all objects get cleaned up correctly when the instances
are destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-5-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When trying to "device_add bcm2837" on a machine that is not suitable for
this device, you can quickly crash QEMU afterwards, e.g. with "info qtree":
echo "{'execute':'qmp_capabilities'} {'execute':'device_add', " \
"'arguments':{'driver':'bcm2837'}} {'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
aarch64-softmmu/qemu-system-aarch64 -M integratorcp,accel=qtest -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 12, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
{"error": {"class": "GenericError", "desc": "Device 'bcm2837' can not be
hotplugged on this machine"}}
Segmentation fault (core dumped)
The qdev_set_parent_bus() from instance_init adds a link to the child devices
which is not valid anymore after the bcm2837 instance has been destroyed.
Unfortunately, the child devices do not get destroyed / unlinked correctly
because both object_initialize() and object_property_add_child() increase
the reference count of the child objects by one, but only one reference
is dropped when the parent gets removed. So let's use the new functions
object_initialize_child() and sysbus_init_child_obj() instead to create
the objects, which will take care of creating the child objects with the
correct reference count of one.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-4-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of functions are initializing an object and attach it immediately
afterwards to the system bus. Provide a common function for this, which
also uses object_initialize_child() to make sure that the reference
counter is correctly initialized to 1 afterwards.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-3-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of code is using the object_initialize() function followed by a call
to object_property_add_child() to add the newly initialized object as a child
of the current object. Both functions increase the reference counter of the
new object, but many spots that call these two functions then forget to drop
one of the superfluous references. So the newly created object is often not
cleaned up correctly when the parent is destroyed. In the worst case, this
can cause crashes, e.g. because device objects are not correctly removed from
their parent_bus.
Since this is a common pattern between many code spots, let's introduce a
new function that takes care of calling all three required initialization
functions, first object_initialize(), then object_property_add_child() and
finally object_unref(). And since the function does a similar job like
object_new_with_props(), also allow to set additional properties via
varargs, and use user_creatable_complete() to make sure that the functions
can be used similarly.
And while we're at object.h, also fix some copy-n-paste errors in the
comments there ("to store the area" --> "to store the error").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1531745974-17187-2-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The file descriptor for /sys/power/state was never closed. Reported
by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'driver' is leaked when the loop is not broken.
Leak introduced by commit 743c71d03c,
spotted by ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* accel/tcg: Use correct test when looking in victim TLB for code
* bcm2835_aux: Swap RX and TX interrupt assignments
* hw/arm/bcm2836: Mark the bcm2836 / bcm2837 devices with user_creatable = false
* hw/intc/arm_gic: Fix handling of GICD_ITARGETSR
* hw/intc/arm_gic: Check interrupt number in gic_deactivate_irq()
* aspeed: Implement write-1-{set, clear} for AST2500 strapping
* target/arm: Fix LD1W and LDFF1W (scalar plus vector)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eKFb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180716' into staging
target-arm queue:
* accel/tcg: Use correct test when looking in victim TLB for code
* bcm2835_aux: Swap RX and TX interrupt assignments
* hw/arm/bcm2836: Mark the bcm2836 / bcm2837 devices with user_creatable = false
* hw/intc/arm_gic: Fix handling of GICD_ITARGETSR
* hw/intc/arm_gic: Check interrupt number in gic_deactivate_irq()
* aspeed: Implement write-1-{set, clear} for AST2500 strapping
* target/arm: Fix LD1W and LDFF1W (scalar plus vector)
# gpg: Signature made Mon 16 Jul 2018 17:38:36 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180716:
accel/tcg: Assert that tlb fill gave us a valid TLB entry
accel/tcg: Use correct test when looking in victim TLB for code
bcm2835_aux: Swap RX and TX interrupt assignments
hw/arm/bcm2836: Mark the bcm2836 / bcm2837 devices with user_creatable = false
hw/intc/arm_gic: Fix handling of GICD_ITARGETSR
hw/intc/arm_gic: Check interrupt number in gic_deactivate_irq()
aspeed: Implement write-1-{set, clear} for AST2500 strapping
target/arm: Fix LD1W and LDFF1W (scalar plus vector)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 4b1a3e1e34 we added a check for whether the TLB entry
we had following a tlb_fill had the INVALID bit set. This could
happen in some circumstances because a stale or wrong TLB entry was
pulled out of the victim cache. However, after commit
68fea03855 (which prevents stale entries being in the victim
cache) and the previous commit (which ensures we don't incorrectly
hit in the victim cache)) this should never be possible.
Drop the check on TLB_INVALID_MASK from the "is this a TLB_RECHECK?"
condition, and instead assert that the tlb fill procedure has given
us a valid TLB entry (or longjumped out with a guest exception).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180713141636.18665-3-peter.maydell@linaro.org
In get_page_addr_code(), we were incorrectly looking in the victim
TLB for an entry which matched the target address for reads, not
for code accesses. This meant that we could hit on a victim TLB
entry that indicated that the address was readable but not
executable, and incorrectly bypass the call to tlb_fill() which
should generate the guest MMU exception. Fix this bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180713141636.18665-2-peter.maydell@linaro.org
RX and TX interrupt bits were reversed, resulting in an endless sequence
of serial interupts in the emulated system and the following repeated
error message when booting Linux.
serial8250: too much work for irq61
This results in a boot failure most of the time.
Qemu command line used to reproduce the problem:
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel arch/arm64/boot/Image \
--append "rdinit=/sbin/init console=ttyS1,115200"
-initrd rootfs.cpio \
-dtb arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb \
-nographic -monitor null -serial null -serial stdio
This is with arm64:defconfig. The root file system was generated using
buildroot.
NB that this error likely arises from an erratum in the
BCM2835 datasheet where the TX and RX bits were swapped
in the AU_MU_IER_REG description (but correct for IIR):
https://elinux.org/BCM2835_datasheet_errata#p12
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1529355846-25102-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added NB about datasheet]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These devices are currently causing some problems when a user is trying
to hot-plug or introspect them during runtime. Since these devices can
not be instantiated by the user at all (they need to be wired up in code
instead), we should mark them with user_creatable = false anyway, then we
avoid at least the crashes with the hot-plugging. The introspection problem
will be handled by a separate patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531415537-26037-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICD_ITARGETSR implementation still has some 11MPCore behaviour
that we were incorrectly using in our GICv1 and GICv2 implementations
for the case where the interrupt number is less than GIC_INTERNAL.
The desired behaviour here is:
* for 11MPCore: RAZ/WI for irqs 0..28; read a number matching the
CPU doing the read for irqs 29..31
* for GICv1 and v2: RAZ/WI if uniprocessor; otherwise read a
number matching the CPU doing the read for all irqs < 32
Stop squashing GICD_ITARGETSR to 0 for IRQs 0..28 unless this
is an 11MPCore GIC.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180712154152.32183-3-peter.maydell@linaro.org
