While container-based cross compilers are not supported, this already makes
it possible to build x86 optionroms on any machine that has an installation
of GCC and binutils for 32- or 64-bit x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-26-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build s390-ccw on any machine that has s390x GCC and binutils
installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-25-alex.bennee@linaro.org>
Ensure that the pc-bios/optionrom and pc-bios/s390-ccw directory
exist at the time when we'll write out the compiler configuration
for them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-13-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-24-alex.bennee@linaro.org>
Firmware builds require paths to all the binutils; it is not enough to
use only cc, or even as/ld as in the case of tests/tcg/tricore.
Adjust the cross-compiler configurator to detect also ar, nm, objcopy,
ranlib and strip.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-12-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-23-alex.bennee@linaro.org>
Also in preparation for handling more binaries from the cross binutils,
support an option --cross-prefix-ARCH. All cross_cc_* defaults are
replaced with cross_prefix_*; the cross_cc_* fallbacks are extended
to the cross-compilation prefix, but the compiler fallbacks remain
as well. This way, for example, --cross-cc-arm=arm-linux-gnueabihf-clang
also applies to armeb binaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-11-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-22-alex.bennee@linaro.org>
In preparation for handling more binaries than just cc, handle
the case of "probe_target_compiler $cpu" directly in the function,
setting the target_* variables based on the ones that are used to
build QEMU. The clang check also needs to be moved after this
fallback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-21-alex.bennee@linaro.org>
The arm compiler can be used for armeb, and the sparc64 compiler
can be used for sparc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-9-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-20-alex.bennee@linaro.org>
tests/tcg/configure.sh has a complicated story.
In the beginning its code ran as part of the creation of config-target.mak
files, and that is where it placed the information on the target compiler.
However, probing for the buildability of TCG tests required multiple
inclusions of config-target.mak in the _main_ Makefile (not in
Makefile.target, which took care of building the QEMU executables in
the pre-Meson era), which polluted the namespace.
Thus, it was moved to a separate directory. It created small config-*.mak
files in $(BUILD_DIR)/tests/tcg. Those were also included multiple
times, but at least they were small and manageable; this was also an
important step in disentangling the TCG tests from Makefile.target.
Since then, Meson has allowed the configure script to go on a diet.
A few compilation tests survive (mostly for sanitizers) but these days
it mostly takes care of command line parsing, looking for tools, and
setting up the environment for Meson to do its stuff.
It's time to extend configure with the capability to build for more
than just one target: not just tests, but also firmware. As a first
step, integrate all the logic to find cross compilers in the configure
script, and move tests/tcg/configure.sh back there (though as a
separate loop, not integrated in the one that generates target
configurations for Meson).
tests/tcg is actually very close to being buildable as a standalone
project, so I actually expect the compiler tests to move back to
tests/tcg, as a "configure" script of sorts which would run at Make
time after the docker images are built. The GCC tree has a similar idea
of doing only bare-bones tree-wide configuration and leaving the rest
for Make time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-19-alex.bennee@linaro.org>
We do not want v8plus for pure sparc32, as the difference with the V8 ABI
are only meaningful on 64-bit CPUs suh as ultrasparc; supersparc is the
best CPU to use for 32-bit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-7-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-18-alex.bennee@linaro.org>
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
TCG tests need both QEMU and firmware to be built, so do "ninja all" before
trying to run them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-5-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-16-alex.bennee@linaro.org>
Let any make target specify ninja goals that needs to be built for it
(though selecting the goals is _not_ recursive on depending targets)
instead of having a custom mechanism only for "make check" and "make
bench".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-15-alex.bennee@linaro.org>
Fix an incorrect "@@:" and move "-d keepdepfile" to the NINJAFLAGS variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-14-alex.bennee@linaro.org>
Just hardcode $(CC) -E, it should be enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-13-alex.bennee@linaro.org>
The one minor wrinkle we need to account for is the netmap support
still requires building from source. We also include cscope and GNU
global as they are used in one of the builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Giuseppe Lettieri <g.lettieri@iet.unipi.it>
Cc: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-12-alex.bennee@linaro.org>
Use lcitool to update debian-ppc64el-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-11-alex.bennee@linaro.org>
Use lcitool to update debian-mips64el-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-10-alex.bennee@linaro.org>
Use lcitool to update debian-mipsel-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-9-alex.bennee@linaro.org>
Use lcitool to update debian-armel-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-8-alex.bennee@linaro.org>
Use lcitool to update debian-armhf-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-7-alex.bennee@linaro.org>
3 space indentation snuck into the initial commit. Clean it up before
we let it get established. I've also:
- removed unused os import
- added double lines between functions
- added some comments and grouped and sorted the generation stanzas
My lint tool is also recommending using f-strings but that requires
python 3.6.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-6-alex.bennee@linaro.org>
The recent refactoring of configure.sh dropped a number of variables
we relied on for printing out information. Make it simpler.
Fixes: eebf199c09 (tests/tcg: invoke Makefile.target directly from QEMU's makefile)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220527153603.887929-5-alex.bennee@linaro.org>
This allows the gitlab UI to show the test results in different ways,
see doc:
https://docs.gitlab.com/ee/ci/unit_test_reports.html#how-it-works
Previous we only reports avocado test results (.avocado_test_job_template),
with this change, the qemu/meson tests are also covered.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220525173411.612224-1-marcandre.lureau@redhat.com>
[AJB: expand the commit description]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-4-alex.bennee@linaro.org>
The cross-i386-tci job uses the fedora-i386-cross image, so we should make sure
that the corresponding job that builds it (the i386-fedora-cross-container job)
has finished before we start the TCI job.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524092600.89997-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-3-alex.bennee@linaro.org>
The "riscv64-debian-cross-container" job does not depend on any other
container job from the first stage, so we can move it to the first
stage, too.
The "riscv64-debian-test-cross-container" job needs the debian11
container, so we should add a proper "needs:" statement here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220524093141.91012-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220527153603.887929-2-alex.bennee@linaro.org>
vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.
This essentially reverts commit 4dd8a7064b
("vmbus: add infrastructure to save/load vmbus requests").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211106134155.582312-2-philmd@redhat.com>
[MSS: Remove also corresponding variables, which are now unused]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This way there is some contact point for incoming patches,
and somebody to review and pick up them.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
* docs/system/arm: Add FEAT_HCX to list of emulated features
* target/arm/hvf: Include missing "cpregs.h"
* hw/sd/allwinner-sdhost: report FIFO water level as 1 when data ready
* SVE: refactor to use TRANS/TRANS_FEAT macros and push
SVE feature check down to individual insn level
-----BEGIN PGP SIGNATURE-----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=MU42
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220530' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* docs/system/arm: Add FEAT_HCX to list of emulated features
* target/arm/hvf: Include missing "cpregs.h"
* hw/sd/allwinner-sdhost: report FIFO water level as 1 when data ready
* SVE: refactor to use TRANS/TRANS_FEAT macros and push
SVE feature check down to individual insn level
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmKU620ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lYDEACf8Mt9eYMTNgccjuqrkw+c
# Za1gTcYlz8Jt90dYjAghQVFSnYWTbqdn10+GzadUYRBfl7Py7Jh531RsfOJlXEng
# 0xzJ9Wjl631SIiCOXwp2mx8WaSkFt4QmII/ooBMjmCrudM+OQWKcbwArvcjTxoL/
# 8DrIE/edyxntFN8Owy6kgFNLo/spAac47rOCHUNtWTWA4TDtmo0TU6boN+J1WjCO
# wz1svl/JIS+6iPqx7B50Bm3h7Yb9NF2NbkUJ0AJEaNJovN7ZbPhobVLU8LbcsfK1
# iNAt4s1UVPH+FFTy1oiBu8d5D3sLDAOff7DmLQ6iKWBpevuEvm3VRbOrHIxLTtEL
# ozc9BEBcNuKsKC6bdeAs2WhOWMjyzNdoaJTKUNJrjjJ//yd/sUXM9qi92BpeSo/8
# LXsUtUje2/JY8y7cgUe2u1oyIo/2DkT/FkMSCr2rVpcHXdWe/8wNPlnzu+UZoWnZ
# 5neLqJrqU8gZemje0ZiSJd6+pl2lO+iM/VGJos/NDLK44SJJDj0GkcmzL7eX6eXm
# Gs0qWM1uDcVxKaCiLVHfKsbVC5x8NHSFeWtmY/EqppggtvgF3vSz7EviKpcAu5dQ
# xp7Jqa9p64QE+snHarTCntH9U1L6ioicPPtK7EO3idbvwJ+g0qhYQPZPh37PO8DW
# uSa9a3btDupJFzIgKorSrA==
# =MU42
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 30 May 2022 09:06:05 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220530' of https://git.linaro.org/people/pmaydell/qemu-arm: (117 commits)
target/arm: Remove aa64_sve check from before disas_sve
target/arm: Add sve feature check for remaining trans_* functions
target/arm: Use TRANS_FEAT for do_FMLAL_zzxw
target/arm: Use TRANS_FEAT for do_FMLAL_zzzw
target/arm: Use TRANS_FEAT for do_shr_narrow
target/arm: Use TRANS_FEAT for do_shll_tb
target/arm: Use TRANS_FEAT for do_narrow_extract
target/arm: Use TRANS_FEAT for FCMLA_zzxz
target/arm: Remove assert in trans_FCMLA_zzxz
target/arm: Use TRANS_FEAT for DO_FPCMP
target/arm: Use TRANS_FEAT for DO_FP_IMM
target/arm: Move null function and sve check into do_fp_imm
target/arm: Use TRANS_FEAT for gen_gvec_fpst_zzzzp
target/arm: Introduce gen_gvec_fpst_zzzzp
target/arm: Use TRANS_FEAT for FCADD
target/arm: Use TRANS_FEAT for gen_gvec_fpst_arg_zpzz
target/arm: Rename do_zpzz_ptr to gen_gvec_fpst_arg_zpzz
target/arm: Use TRANS_FEAT for do_ppz_fp
target/arm: Use TRANS_FEAT for FLOGB
target/arm: Use TRANS_FEAT for do_frint_mode
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have individual checks on all insns within disas_sve.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-115-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For all remaining trans_* functions that do not already
have a check, add one now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-114-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-113-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-112-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from do_sve2_shr_narrow and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-111-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from do_sve2_shll_tb and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-110-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from do_sve2_narrow_extract and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-109-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-108-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since 636ddeb15c, we do not require rd == ra.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-107-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-106-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-105-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-104-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-103-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-102-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-101-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-100-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match other expansion functions and
move to be adjacent. Split out gen_gvec_fpst_zzzp as a
helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-99-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-98-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-97-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-96-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-95-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
