The n->reg_size parameter unnecessarily splits the BAR0 size calculation
in two phases; removed to simplify the code.
With all the calculations done in one place, it seems the pow2ceil,
applied originally to reg_size, is unnecessary. The rounding should
happen as the last step, when BAR size includes Nvme registers, queue
registers, and MSIX-related space.
Finally, the size of the mmio memory region is extended to cover the 1st
4KiB padding (see the map below). Access to this range is handled as
interaction with a non-existing queue and generates an error trace, so
actually nothing changes, while the reg_size variable is no longer needed.
--------------------
| BAR0 |
--------------------
[Nvme Registers ]
[Queues ]
[power-of-2 padding] - removed in this patch
[4KiB padding (1) ]
[MSIX TABLE ]
[4KiB padding (2) ]
[MSIX PBA ]
[power-of-2 padding]
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The NVMe device defines two properties: max_ioqpairs, msix_qsize. Having
them as constants is problematic for SR-IOV support.
SR-IOV introduces virtual resources (queues, interrupts) that can be
assigned to PF and its dependent VFs. Each device, following a reset,
should work with the configured number of queues. A single constant is
no longer sufficient to hold the whole state.
This patch tries to solve the problem by introducing additional
variables in NvmeCtrl’s state. The variables for, e.g., managing queues
are therefore organized as:
- n->params.max_ioqpairs – no changes, constant set by the user
- n->(mutable_state) – (not a part of this patch) user-configurable,
specifies number of queues available _after_
reset
- n->conf_ioqpairs - (new) used in all the places instead of the ‘old’
n->params.max_ioqpairs; initialized in realize()
and updated during reset() to reflect user’s
changes to the mutable state
Since the number of available i/o queues and interrupts can change in
runtime, buffers for sq/cqs and the MSIX-related structures are
allocated big enough to handle the limits, to completely avoid the
complicated reallocation. A helper function (nvme_update_msixcap_ts)
updates the corresponding capability register, to signal configuration
changes.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements the Function Level Reset, a feature currently not
implemented for the Nvme device, while listed as a mandatory ("shall")
in the 1.4 spec.
The implementation reuses FLR-related building blocks defined for the
pci-bridge module, and follows the same logic:
- FLR capability is advertised in the PCIE config,
- custom pci_write_config callback detects a write to the trigger
register and performs the PCI reset,
- which, eventually, calls the custom dc->reset handler.
Depending on reset type, parts of the state should (or should not) be
cleared. To distinguish the type of reset, an additional parameter is
passed to the reset function.
This patch also enables advertisement of the Power Management PCI
capability. The main reason behind it is to announce the no_soft_reset=1
bit, to signal SR-IOV support where each VF can be reset individually.
The implementation purposedly ignores writes to the PMCS.PS register,
as even such naïve behavior is enough to correctly handle the D3->D0
transition.
It’s worth to note, that the power state transition back to to D3, with
all the corresponding side effects, wasn't and stil isn't handled
properly.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Introduce handling for Secondary Controller List (Identify command with
CNS value of 15h).
Secondary controller ids are unique in the subsystem, hence they are
reserved by it upon initialization of the primary controller to the
number of sriov_max_vfs.
ID reservation requires the addition of an intermediate controller slot
state, so the reserved controller has the address 0xFFFF.
A secondary controller is in the reserved state when it has no virtual
function assigned, but its primary controller is realized.
Secondary controller reservations are released to NULL when its primary
controller is unregistered.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implementation of Primary Controller Capabilities data
structure (Identify command with CNS value of 14h).
Currently, the command returns only ID of a primary controller.
Handling of remaining fields are added in subsequent patches
implementing virtualization enhancements.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This replaces my and Juan's earlier pulls over the last 2 days;
4th time lucky?
Compared to my pull earlier:
Removed Hyman's dirty ring set
In this migration PULL request:
- Dainiel Berrangé - qemufileops cleanup
- Leonardo Bras - cleanups for zero copy
- Juan Quintela - RDMA cleanups
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmK0mnwACgkQBRYzHrxb
/ecJYQ/8DdQBVYpJjpHj3mBx39aXodM7uM4Jt1okuSF92y9KRSNdIs3nvvwWAZbL
dWAUHUZBNOfZF7Eqe6WWCIDNxUTz88RkMM16N3+a5sqBa0xU6rP6cvyw9vYrnsmx
aHVQ1ESosTby2qcb1ofjYRXWNt7GhDtRIH55m3mSalP/WAgjMe3MsrAtz66T4w55
4paTVwgS/WMuLD9dqyESyofePnvtM8z3ye2a75JRscBQYmpO+XuX3IX5ah6m439s
fI1BezQU2Q4YNDmCEWvdfZ2tqgcfi8dHnu0JB9QTfbkPVh9jw25VPpnymimMB7iW
MlXAlDr7m9HQI6OjIkq8pXBcgWQpbVGMon1CcrDmGCReEjnQ5lTsb27fkXzf/Nwu
09iuNfYGcSGAbZ8GZa/lrRTGeINrSj99uOVxrTvVS0db2+1va3hkamGMULhsdX6O
smOrje79pVLAr7JJSMH2bqFv9cKtLu77HndSVtswkRRMhtDU+VQI5FxYlwueuawJ
toDM4DJMd3pJHIpPrUwxlo4D9dkdxPfqC1GATDPxw9/vYgbORn8fkt5g9EYxBzc0
pWRY9SNuw0MC54JGEoFc77+VKJXK1A97j9GoF+Vyoh30yTgZ3q9tm2eElpYwtHDy
t8zEVC9QadcgMdRAnJqgZgaWdfwKiHpjplSn5lOGDLOo7gfSmik=
=ajVU
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220623b' of https://gitlab.com/dagrh/qemu into staging
[v3] Migration pull 2022-06-23
This replaces my and Juan's earlier pulls over the last 2 days;
4th time lucky?
Compared to my pull earlier:
Removed Hyman's dirty ring set
In this migration PULL request:
- Dainiel Berrangé - qemufileops cleanup
- Leonardo Bras - cleanups for zero copy
- Juan Quintela - RDMA cleanups
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmK0mnwACgkQBRYzHrxb
# /ecJYQ/8DdQBVYpJjpHj3mBx39aXodM7uM4Jt1okuSF92y9KRSNdIs3nvvwWAZbL
# dWAUHUZBNOfZF7Eqe6WWCIDNxUTz88RkMM16N3+a5sqBa0xU6rP6cvyw9vYrnsmx
# aHVQ1ESosTby2qcb1ofjYRXWNt7GhDtRIH55m3mSalP/WAgjMe3MsrAtz66T4w55
# 4paTVwgS/WMuLD9dqyESyofePnvtM8z3ye2a75JRscBQYmpO+XuX3IX5ah6m439s
# fI1BezQU2Q4YNDmCEWvdfZ2tqgcfi8dHnu0JB9QTfbkPVh9jw25VPpnymimMB7iW
# MlXAlDr7m9HQI6OjIkq8pXBcgWQpbVGMon1CcrDmGCReEjnQ5lTsb27fkXzf/Nwu
# 09iuNfYGcSGAbZ8GZa/lrRTGeINrSj99uOVxrTvVS0db2+1va3hkamGMULhsdX6O
# smOrje79pVLAr7JJSMH2bqFv9cKtLu77HndSVtswkRRMhtDU+VQI5FxYlwueuawJ
# toDM4DJMd3pJHIpPrUwxlo4D9dkdxPfqC1GATDPxw9/vYgbORn8fkt5g9EYxBzc0
# pWRY9SNuw0MC54JGEoFc77+VKJXK1A97j9GoF+Vyoh30yTgZ3q9tm2eElpYwtHDy
# t8zEVC9QadcgMdRAnJqgZgaWdfwKiHpjplSn5lOGDLOo7gfSmik=
# =ajVU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Jun 2022 09:53:16 AM PDT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
* tag 'pull-migration-20220623b' of https://gitlab.com/dagrh/qemu: (25 commits)
migration: remove the QEMUFileOps abstraction
migration: remove the QEMUFileOps 'get_return_path' callback
migration: remove the QEMUFileOps 'writev_buffer' callback
migration: remove the QEMUFileOps 'get_buffer' callback
migration: remove the QEMUFileOps 'close' callback
migration: remove the QEMUFileOps 'set_blocking' callback
migration: remove the QEMUFileOps 'shut_down' callback
migration: remove unused QEMUFileGetFD typedef / qemu_get_fd method
migration: introduce new constructors for QEMUFile
migration: hardcode assumption that QEMUFile is backed with QIOChannel
migration: stop passing 'opaque' parameter to QEMUFile hooks
migration: convert savevm to use QIOChannelBlock for VMState
migration: introduce a QIOChannel impl for BlockDriverState VMState
migration: rename qemu_file_update_transfer to qemu_file_acct_rate_limit
migration: rename qemu_update_position to qemu_file_credit_transfer
migration: rename qemu_ftell to qemu_file_total_transferred
migration: rename 'pos' field in QEMUFile to 'bytes_processed'
migration: rename rate limiting fields in QEMUFile
migration: remove unreachble RDMA code in save_hook impl
migration: switch to use QIOChannelNull for dummy channel
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all QEMUFile callbacks are removed, the entire concept can be
deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the get_return_path logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the writev_buffer logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the get_buffer logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup len = *-*EIO as spotted by Peter Xu
This directly implements the close logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the set_blocking logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the shutdown logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Prepare for the elimination of QEMUFileOps by introducing a pair of new
constructors. This lets us distinguish between an input and output file
object explicitly rather than via the existance of specific callbacks.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only callers of qemu_fopen_ops pass 'true' for the 'has_ioc'
parameter, so hardcode this assumption in QEMUFile, by passing in
the QIOChannel object as a non-opaque parameter.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed long line
The only user of the hooks is RDMA which provides a QIOChannel backed
impl of QEMUFile. It can thus use the qemu_file_get_ioc() method.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With this change, all QEMUFile usage is backed by QIOChannel at
last.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Wrap long lines
Introduce a QIOChannelBlock class that exposes the BlockDriverState
VMState region for I/O.
This is kept in the migration/ directory rather than io/, to avoid
a mutual dependancy between block/ <-> io/ directories. Also the
VMState should only be used by the migration code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed coding style in qio_channel_block_close
The qemu_file_update_transfer name doesn't give a clear guide on what
its purpose is, and how it differs from the qemu_file_credit_transfer
method. The latter is specifically for accumulating for total migration
traffic, while the former is specifically for accounting in thue rate
limit calculations. The new name give better guidance on its usage.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qemu_update_position method name gives the misleading impression
that it is changing the current file offset. Most of the files are
just streams, however, so there's no concept of a file offset in the
general case.
What this method is actually used for is to report on the number of
bytes that have been transferred out of band from the main I/O methods.
This new name better reflects this purpose.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The name 'ftell' gives the misleading impression that the QEMUFile
objects are seekable. This is not the case, as in general we just
have an opaque stream. The users of this method are only interested
in the total bytes processed. This switches to a new name that
reflects the intended usage.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Wrapped long line
The field name 'pos' gives the misleading impression that the QEMUFile
objects are seekable. This is not the case, as in general we just
have an opaque stream. The users of this method are only interested
in the total bytes processed. This switches to a new name that
reflects the intended usage.
Every QIOChannel backed impl of QEMUFile is currently ignoring the
'pos' field.
The only QEMUFile impl using 'pos' as an offset for I/O is the block
device vmstate. A later patch is introducing a QIOChannel impl for the
vmstate, and to handle this it is tracking a file offset itself
internally to the QIOChannel impl. So when we later eliminate the
QEMUFileOps callbacks later, the 'pos' field will no longer be used
from any I/O read/write methods.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed long line
This renames the following QEMUFile fields
* bytes_xfer -> rate_limit_used
* xfer_limit -> rate_limit_max
The intent is to make it clear that 'bytes_xfer' is specifically related
to rate limiting of data and applies to data queued, which need not have
been transferred on the wire yet if a flush hasn't taken place.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The QEMUFile 'save_hook' callback has a 'size_t size' parameter.
The RDMA impl of this has logic that takes different actions
depending on whether the value is zero or non-zero. It has
commented out logic that would have taken further actions
if the value was negative.
The only place where the 'save_hook' callback is invoked is
the ram_control_save_page() method, which passes 'size'
through from its caller. The only caller of this method is
in turn control_save_page(). This method unconditionally
passes the 'TARGET_PAGE_SIZE' constant for the 'size' parameter.
IOW, the only scenario for 'size' that can execute in the
qemu_rdma_save_page method is 'size > 0'. The remaining code
has been unreachable since RDMA support was first introduced
9 years ago.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This removes one further custom impl of QEMUFile, in favour of a
QIOChannel based impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is for code which needs a portable equivalent to a QIOChannelFile
connected to /dev/null.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When originally implemented, zero_copy_send was designed as a Migration
paramenter.
But taking into account how is that supposed to work, and how
the difference between a capability and a parameter, it only makes sense
that zero-copy-send would work better as a capability.
Taking into account how recently the change got merged, it was decided
that it's still time to make it right, and convert zero_copy_send into
a Migration capability.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: always define the capability, even on non-Linux but error if
set; avoids build problems with the capability
Somewhere between v6 and v7 the of the zero-copy-send patchset a crucial
part of the flushing mechanism got missing: incrementing zero_copy_queued.
Without that, the flushing interface becomes a no-op, and there is no
guarantee the buffer is really sent.
This can go as bad as causing a corruption in RAM during migration.
Fixes: 2bc58ffc29 ("QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX")
Reported-by: 徐闯 <xuchuangxclwt@bytedance.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During implementation of MSG_ZEROCOPY feature, a lot of #ifdefs were
introduced, particularly at qio_channel_socket_writev().
Rewrite some of those changes so it's easier to read.
Also, introduce an assert to help detect incorrect zero-copy usage is when
it's disabled on build.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed up thinko'd g_assert_unreachable->g_assert_not_reached
Nobody has ever showed up to unregister individual pages, and another
set of patches written by Daniel P. Berrangé <berrange@redhat.com>
just remove qemu_rdma_signal_unregister() function needed here.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* Extra avocado tests using buildroot images
* Conversion of the I2C model to the registerfield interface
* Support for the I2C new register interface on AST2600
* Various I2C enhancements
* I2C support for the AST1030
* Improvement of the Aspeed SMC and m25p80 qtest
-----BEGIN PGP SIGNATURE-----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=OsUe
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220622' of https://github.com/legoater/qemu into staging
aspeed queue:
* Extra avocado tests using buildroot images
* Conversion of the I2C model to the registerfield interface
* Support for the I2C new register interface on AST2600
* Various I2C enhancements
* I2C support for the AST1030
* Improvement of the Aspeed SMC and m25p80 qtest
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmKyzCYACgkQUaNDx8/7
# 7KG+Aw/+MM3BlQfzDhjETkznqFbvp+aDcnKYwd/brizUC1y3paPFGc0xzD05x3QC
# 2th44oYS934UwQ78EMkC0uNed/kHh+6aHaBrq/XylIg7Dbq5QeCBXwRGCNW6tgtc
# K3ZSM20QM+XRCjmo9ys792NYPC+8tYpw7idb2AOeum7ic/ZaeT3h1FX1Mr57I3XE
# PYwDEBEd4hJ3DroYzIP9YQvRBNu8/d5VoiNr3GLfNy3zrkhuJ4D4jUAEbHATG7Gb
# k0A6o6bVAL85AUSq/ksceHqzWAnizh1q1o/k9UP83HIt1S3ghgK6RsAu4+9HKlP4
# lZ6MFfx3Nzf8u2y/FlOiuABEBUNsngjNmLo6B/qe/cZk60/nS56qOWSvuzPxqVDO
# lI++SLY6R1D8q36H4eF/vq/AyLnXBxGqeq0DipPcnZVKdVVHUHppNly5efJ/7cWn
# VybobblU48BCgjc/EoMVEy8L/t/uRjY3wmoKkfKLCObRrlcPxSrLPUP8+j8nR0JG
# zDOh+CrxHTUbJGV6qRmZx9m2HQtbtH5k89UxskkUkscvVDqWhxqdFVnTWfXcmyP8
# LqTkEv7IV4ECM1zN5OVK9No46WCi5j24bxO3z7or4e04vgwjM41unV7HAFl8Z0/s
# tyFQUG4dFAKHH7quU0F3qSxnORNyCy5ssEpmobujeifbiFMpNss=
# =OsUe
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Jun 2022 01:00:38 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220622' of https://github.com/legoater/qemu:
hw: m25p80: fixing individual test failure when tests are running in isolation
aspeed/hace: Add missing newlines to unimp messages
aspeed/i2c: Enable SLAVE_ADDR_RX_MATCH always
hw/i2c/aspeed: add DEV_ADDR in old register mode
hw/i2c/aspeed: rework raise interrupt trace event
aspeed: Add I2C buses to AST1030 model
aspeed/i2c: Add ast1030 controller models
aspeed: i2c: Move regs and helpers to header file
aspeed: i2c: Add PKT_DONE IRQ to trace
aspeed: i2c: Add new mode support
aspeed: i2c: Use reg array instead of individual vars
aspeed: i2c: Migrate to registerfields API
hw/registerfields: Add shared fields macros
test/avocado/machine_aspeed.py: Add an I2C RTC test
test/avocado/machine_aspeed.py: Add I2C tests to ast2600-evb
test/avocado/machine_aspeed.py: Add I2C tests to ast2500-evb
test/avocado/machine_aspeed.py: Add tests using buildroot images
test/avocado/machine_aspeed.py: Move OpenBMC tests
aspeed: Remove fake RTC device on ast2500-evb
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no 'slave match interrupt' enable bit in the Interrupt
Control Register. Consider it is always enabled and extend the mask
value 'bus->regs[intr_ctrl_reg]' with the SLAVE_ADDR_RX_MATCH bit when
the interrupt is raised.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add support for writing and reading the device address register in old
register mode.
On the AST2400 (only 1 slave address)
* no upper bits
On the AST2500 (2 possible slave addresses),
* bit[31] : Slave Address match indicator
* bit[30] : Slave Address Receiving pending
On the AST2600 (3 possible slave addresses),
* bit[31-30] : Slave Address match indicator
* bit[29] : Slave Address Receiving pending
The model could be more precise to take into account all fields but
since the Linux driver is masking the register value being set, it
should be fine. See commit 3fb2e2aeafb2 ("i2c: aspeed: disable
additional device addresses on ast2[56]xx") from Zeiv. This can be
addressed later.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: add details to commit log ]
Message-Id: <20220601210831.67259-3-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Build a single string instead of having several parameters on the trace
event.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: simplified trace buffer creation ]
Message-Id: <20220601210831.67259-2-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Instantiate the I2C buses in AST1030 model and create two slave device
for ast1030-evb.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg : - adapted to current AST1030 upstream models
- changed AST2600 to AST1030 in comment
- fixed typo in commit log ]
Message-Id: <20220324100439.478317-3-troy_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Moves register definitions and short commonly used inlined functiosn to
the header file to help tidy up the implementation file.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324
Message-Id: <20220331043248.2237838-8-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
On AST2600, I2C has a secondary mode, called "new mode", which changes
the layout of registers, adds some minor behavior changes, and
introduces a new way to transfer data called "packet mode".
Most of the bit positions of the fields are the same between old and new
mode, so we use SHARED_FIELD_XX macros to reuse most of the code between
the different modes.
For packet mode, most of the command behavior is the same compared to
other modes, but there are some minor changes to how interrupts are
handled compared to other modes.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e
Message-Id: <20220331043248.2237838-6-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Using a register array will allow us to represent old-mode and new-mode
I2C registers by using the same underlying register array, instead of
adding an entire new set of variables to represent new mode.
As part of this, we also do additional cleanup to use ARRAY_FIELD_
macros instead of FIELD_ macros on registers.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: Ib94996b17c361b8490c042b43c99d8abc69332e3
[ clg: use of memset in aspeed_i2c_bus_reset() ]
Message-Id: <20220331043248.2237838-5-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This cleans up some of the field accessing, setting, and clearing
bitwise operations, and wraps them in macros instead.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: I33018d6325fa04376e7c29dc4a49ab389a8e333a
Message-Id: <20220331043248.2237838-4-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Occasionally a peripheral will have different operating modes, where the
MMIO layout changes, but some of the register fields have the same offsets
and behaviors.
To help support this, we add SHARED_FIELD_XX macros that create SHIFT,
LENGTH, and MASK macros for the fields that are shared across registers,
and accessors for these fields.
An example use may look as follows:
There is a peripheral with registers REG_MODE1 and REG_MODE2 at
different addreses, and both have a field FIELD1 initialized by
SHARED_FIELD().
Depending on what mode the peripheral is operating in, the user could
extract FIELD1 via
SHARED_ARRAY_FIELD_EX32(s->regs, R_REG_MODE1, FIELD1)
or
SHARED_ARRAY_FIELD_EX32(s->regs, R_REG_MODE2, FIELD1)
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: Id3dc53e7d2f8741c95697cbae69a81bb699fa3cb
Message-Id: <20220331043248.2237838-2-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add an RTC device and check that the output of the hwclock command
matches the current year.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a named I2C temperature sensor device on the command line,
instantiate device from Linux since it is not part of the device tree,
and check the temperature is correctly reported under sysfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a named I2C temperature sensor device on the command line,
instantiate device from Linux since it is not part of the device tree,
and check the temperature is correctly reported under sysfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Łukasz Gieryk
Lukasz Maniak
Richard Henderson
Daniel P. Berrangé
Leonardo Bras
Juan Quintela
Iris Chen
Joel Stanley
Cédric Le Goater
Klaus Jensen
Troy Lee
Joe Komlodi